Move the world out of /zfs/ and seperate out module build tree

3 files changed, 1508 insertions, 0 deletions

diff --git a/module/avl/avl.c b/module/avl/avl.c
new file mode 100644
index 000000000..c9727c643
--- /dev/null
+++ b/module/avl/avl.c
@@ -0,0 +1,1033 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*
+ * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
+ * Use is subject to license terms.
+ */
+
+#pragma ident	"%Z%%M%	%I%	%E% SMI"
+
+
+/*
+ * AVL - generic AVL tree implementation for kernel use
+ *
+ * A complete description of AVL trees can be found in many CS textbooks.
+ *
+ * Here is a very brief overview. An AVL tree is a binary search tree that is
+ * almost perfectly balanced. By "almost" perfectly balanced, we mean that at
+ * any given node, the left and right subtrees are allowed to differ in height
+ * by at most 1 level.
+ *
+ * This relaxation from a perfectly balanced binary tree allows doing
+ * insertion and deletion relatively efficiently. Searching the tree is
+ * still a fast operation, roughly O(log(N)).
+ *
+ * The key to insertion and deletion is a set of tree maniuplations called
+ * rotations, which bring unbalanced subtrees back into the semi-balanced state.
+ *
+ * This implementation of AVL trees has the following peculiarities:
+ *
+ *	- The AVL specific data structures are physically embedded as fields
+ *	  in the "using" data structures.  To maintain generality the code
+ *	  must constantly translate between "avl_node_t *" and containing
+ *	  data structure "void *"s by adding/subracting the avl_offset.
+ *
+ *	- Since the AVL data is always embedded in other structures, there is
+ *	  no locking or memory allocation in the AVL routines. This must be
+ *	  provided for by the enclosing data structure's semantics. Typically,
+ *	  avl_insert()/_add()/_remove()/avl_insert_here() require some kind of
+ *	  exclusive write lock. Other operations require a read lock.
+ *
+ *      - The implementation uses iteration instead of explicit recursion,
+ *	  since it is intended to run on limited size kernel stacks. Since
+ *	  there is no recursion stack present to move "up" in the tree,
+ *	  there is an explicit "parent" link in the avl_node_t.
+ *
+ *      - The left/right children pointers of a node are in an array.
+ *	  In the code, variables (instead of constants) are used to represent
+ *	  left and right indices.  The implementation is written as if it only
+ *	  dealt with left handed manipulations.  By changing the value assigned
+ *	  to "left", the code also works for right handed trees.  The
+ *	  following variables/terms are frequently used:
+ *
+ *		int left;	// 0 when dealing with left children,
+ *				// 1 for dealing with right children
+ *
+ *		int left_heavy;	// -1 when left subtree is taller at some node,
+ *				// +1 when right subtree is taller
+ *
+ *		int right;	// will be the opposite of left (0 or 1)
+ *		int right_heavy;// will be the opposite of left_heavy (-1 or 1)
+ *
+ *		int direction;  // 0 for "<" (ie. left child); 1 for ">" (right)
+ *
+ *	  Though it is a little more confusing to read the code, the approach
+ *	  allows using half as much code (and hence cache footprint) for tree
+ *	  manipulations and eliminates many conditional branches.
+ *
+ *	- The avl_index_t is an opaque "cookie" used to find nodes at or
+ *	  adjacent to where a new value would be inserted in the tree. The value
+ *	  is a modified "avl_node_t *".  The bottom bit (normally 0 for a
+ *	  pointer) is set to indicate if that the new node has a value greater
+ *	  than the value of the indicated "avl_node_t *".
+ */
+
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/debug.h>
+#include <sys/avl.h>
+#include <sys/cmn_err.h>
+
+/*
+ * Small arrays to translate between balance (or diff) values and child indeces.
+ *
+ * Code that deals with binary tree data structures will randomly use
+ * left and right children when examining a tree.  C "if()" statements
+ * which evaluate randomly suffer from very poor hardware branch prediction.
+ * In this code we avoid some of the branch mispredictions by using the
+ * following translation arrays. They replace random branches with an
+ * additional memory reference. Since the translation arrays are both very
+ * small the data should remain efficiently in cache.
+ */
+static const int  avl_child2balance[2]	= {-1, 1};
+static const int  avl_balance2child[]	= {0, 0, 1};
+
+
+/*
+ * Walk from one node to the previous valued node (ie. an infix walk
+ * towards the left). At any given node we do one of 2 things:
+ *
+ * - If there is a left child, go to it, then to it's rightmost descendant.
+ *
+ * - otherwise we return thru parent nodes until we've come from a right child.
+ *
+ * Return Value:
+ * NULL - if at the end of the nodes
+ * otherwise next node
+ */
+void *
+avl_walk(avl_tree_t *tree, void	*oldnode, int left)
+{
+	size_t off = tree->avl_offset;
+	avl_node_t *node = AVL_DATA2NODE(oldnode, off);
+	int right = 1 - left;
+	int was_child;
+
+
+	/*
+	 * nowhere to walk to if tree is empty
+	 */
+	if (node == NULL)
+		return (NULL);
+
+	/*
+	 * Visit the previous valued node. There are two possibilities:
+	 *
+	 * If this node has a left child, go down one left, then all
+	 * the way right.
+	 */
+	if (node->avl_child[left] != NULL) {
+		for (node = node->avl_child[left];
+		    node->avl_child[right] != NULL;
+		    node = node->avl_child[right])
+			;
+	/*
+	 * Otherwise, return thru left children as far as we can.
+	 */
+	} else {
+		for (;;) {
+			was_child = AVL_XCHILD(node);
+			node = AVL_XPARENT(node);
+			if (node == NULL)
+				return (NULL);
+			if (was_child == right)
+				break;
+		}
+	}
+
+	return (AVL_NODE2DATA(node, off));
+}
+
+/*
+ * Return the lowest valued node in a tree or NULL.
+ * (leftmost child from root of tree)
+ */
+void *
+avl_first(avl_tree_t *tree)
+{
+	avl_node_t *node;
+	avl_node_t *prev = NULL;
+	size_t off = tree->avl_offset;
+
+	for (node = tree->avl_root; node != NULL; node = node->avl_child[0])
+		prev = node;
+
+	if (prev != NULL)
+		return (AVL_NODE2DATA(prev, off));
+	return (NULL);
+}
+
+/*
+ * Return the highest valued node in a tree or NULL.
+ * (rightmost child from root of tree)
+ */
+void *
+avl_last(avl_tree_t *tree)
+{
+	avl_node_t *node;
+	avl_node_t *prev = NULL;
+	size_t off = tree->avl_offset;
+
+	for (node = tree->avl_root; node != NULL; node = node->avl_child[1])
+		prev = node;
+
+	if (prev != NULL)
+		return (AVL_NODE2DATA(prev, off));
+	return (NULL);
+}
+
+/*
+ * Access the node immediately before or after an insertion point.
+ *
+ * "avl_index_t" is a (avl_node_t *) with the bottom bit indicating a child
+ *
+ * Return value:
+ *	NULL: no node in the given direction
+ *	"void *"  of the found tree node
+ */
+void *
+avl_nearest(avl_tree_t *tree, avl_index_t where, int direction)
+{
+	int child = AVL_INDEX2CHILD(where);
+	avl_node_t *node = AVL_INDEX2NODE(where);
+	void *data;
+	size_t off = tree->avl_offset;
+
+	if (node == NULL) {
+		ASSERT(tree->avl_root == NULL);
+		return (NULL);
+	}
+	data = AVL_NODE2DATA(node, off);
+	if (child != direction)
+		return (data);
+
+	return (avl_walk(tree, data, direction));
+}
+
+
+/*
+ * Search for the node which contains "value".  The algorithm is a
+ * simple binary tree search.
+ *
+ * return value:
+ *	NULL: the value is not in the AVL tree
+ *		*where (if not NULL)  is set to indicate the insertion point
+ *	"void *"  of the found tree node
+ */
+void *
+avl_find(avl_tree_t *tree, void *value, avl_index_t *where)
+{
+	avl_node_t *node;
+	avl_node_t *prev = NULL;
+	int child = 0;
+	int diff;
+	size_t off = tree->avl_offset;
+
+	for (node = tree->avl_root; node != NULL;
+	    node = node->avl_child[child]) {
+
+		prev = node;
+
+		diff = tree->avl_compar(value, AVL_NODE2DATA(node, off));
+		ASSERT(-1 <= diff && diff <= 1);
+		if (diff == 0) {
+#ifdef DEBUG
+			if (where != NULL)
+				*where = 0;
+#endif
+			return (AVL_NODE2DATA(node, off));
+		}
+		child = avl_balance2child[1 + diff];
+
+	}
+
+	if (where != NULL)
+		*where = AVL_MKINDEX(prev, child);
+
+	return (NULL);
+}
+
+
+/*
+ * Perform a rotation to restore balance at the subtree given by depth.
+ *
+ * This routine is used by both insertion and deletion. The return value
+ * indicates:
+ *	 0 : subtree did not change height
+ *	!0 : subtree was reduced in height
+ *
+ * The code is written as if handling left rotations, right rotations are
+ * symmetric and handled by swapping values of variables right/left[_heavy]
+ *
+ * On input balance is the "new" balance at "node". This value is either
+ * -2 or +2.
+ */
+static int
+avl_rotation(avl_tree_t *tree, avl_node_t *node, int balance)
+{
+	int left = !(balance < 0);	/* when balance = -2, left will be 0 */
+	int right = 1 - left;
+	int left_heavy = balance >> 1;
+	int right_heavy = -left_heavy;
+	avl_node_t *parent = AVL_XPARENT(node);
+	avl_node_t *child = node->avl_child[left];
+	avl_node_t *cright;
+	avl_node_t *gchild;
+	avl_node_t *gright;
+	avl_node_t *gleft;
+	int which_child = AVL_XCHILD(node);
+	int child_bal = AVL_XBALANCE(child);
+
+	/* BEGIN CSTYLED */
+	/*
+	 * case 1 : node is overly left heavy, the left child is balanced or
+	 * also left heavy. This requires the following rotation.
+	 *
+	 *                   (node bal:-2)
+	 *                    /           \
+	 *                   /             \
+	 *              (child bal:0 or -1)
+	 *              /    \
+	 *             /      \
+	 *                     cright
+	 *
+	 * becomes:
+	 *
+	 *              (child bal:1 or 0)
+	 *              /        \
+	 *             /          \
+	 *                        (node bal:-1 or 0)
+	 *                         /     \
+	 *                        /       \
+	 *                     cright
+	 *
+	 * we detect this situation by noting that child's balance is not
+	 * right_heavy.
+	 */
+	/* END CSTYLED */
+	if (child_bal != right_heavy) {
+
+		/*
+		 * compute new balance of nodes
+		 *
+		 * If child used to be left heavy (now balanced) we reduced
+		 * the height of this sub-tree -- used in "return...;" below
+		 */
+		child_bal += right_heavy; /* adjust towards right */
+
+		/*
+		 * move "cright" to be node's left child
+		 */
+		cright = child->avl_child[right];
+		node->avl_child[left] = cright;
+		if (cright != NULL) {
+			AVL_SETPARENT(cright, node);
+			AVL_SETCHILD(cright, left);
+		}
+
+		/*
+		 * move node to be child's right child
+		 */
+		child->avl_child[right] = node;
+		AVL_SETBALANCE(node, -child_bal);
+		AVL_SETCHILD(node, right);
+		AVL_SETPARENT(node, child);
+
+		/*
+		 * update the pointer into this subtree
+		 */
+		AVL_SETBALANCE(child, child_bal);
+		AVL_SETCHILD(child, which_child);
+		AVL_SETPARENT(child, parent);
+		if (parent != NULL)
+			parent->avl_child[which_child] = child;
+		else
+			tree->avl_root = child;
+
+		return (child_bal == 0);
+	}
+
+	/* BEGIN CSTYLED */
+	/*
+	 * case 2 : When node is left heavy, but child is right heavy we use
+	 * a different rotation.
+	 *
+	 *                   (node b:-2)
+	 *                    /   \
+	 *                   /     \
+	 *                  /       \
+	 *             (child b:+1)
+	 *              /     \
+	 *             /       \
+	 *                   (gchild b: != 0)
+	 *                     /  \
+	 *                    /    \
+	 *                 gleft   gright
+	 *
+	 * becomes:
+	 *
+	 *              (gchild b:0)
+	 *              /       \
+	 *             /         \
+	 *            /           \
+	 *        (child b:?)   (node b:?)
+	 *         /  \          /   \
+	 *        /    \        /     \
+	 *            gleft   gright
+	 *
+	 * computing the new balances is more complicated. As an example:
+	 *	 if gchild was right_heavy, then child is now left heavy
+	 *		else it is balanced
+	 */
+	/* END CSTYLED */
+	gchild = child->avl_child[right];
+	gleft = gchild->avl_child[left];
+	gright = gchild->avl_child[right];
+
+	/*
+	 * move gright to left child of node and
+	 *
+	 * move gleft to right child of node
+	 */
+	node->avl_child[left] = gright;
+	if (gright != NULL) {
+		AVL_SETPARENT(gright, node);
+		AVL_SETCHILD(gright, left);
+	}
+
+	child->avl_child[right] = gleft;
+	if (gleft != NULL) {
+		AVL_SETPARENT(gleft, child);
+		AVL_SETCHILD(gleft, right);
+	}
+
+	/*
+	 * move child to left child of gchild and
+	 *
+	 * move node to right child of gchild and
+	 *
+	 * fixup parent of all this to point to gchild
+	 */
+	balance = AVL_XBALANCE(gchild);
+	gchild->avl_child[left] = child;
+	AVL_SETBALANCE(child, (balance == right_heavy ? left_heavy : 0));
+	AVL_SETPARENT(child, gchild);
+	AVL_SETCHILD(child, left);
+
+	gchild->avl_child[right] = node;
+	AVL_SETBALANCE(node, (balance == left_heavy ? right_heavy : 0));
+	AVL_SETPARENT(node, gchild);
+	AVL_SETCHILD(node, right);
+
+	AVL_SETBALANCE(gchild, 0);
+	AVL_SETPARENT(gchild, parent);
+	AVL_SETCHILD(gchild, which_child);
+	if (parent != NULL)
+		parent->avl_child[which_child] = gchild;
+	else
+		tree->avl_root = gchild;
+
+	return (1);	/* the new tree is always shorter */
+}
+
+
+/*
+ * Insert a new node into an AVL tree at the specified (from avl_find()) place.
+ *
+ * Newly inserted nodes are always leaf nodes in the tree, since avl_find()
+ * searches out to the leaf positions.  The avl_index_t indicates the node
+ * which will be the parent of the new node.
+ *
+ * After the node is inserted, a single rotation further up the tree may
+ * be necessary to maintain an acceptable AVL balance.
+ */
+void
+avl_insert(avl_tree_t *tree, void *new_data, avl_index_t where)
+{
+	avl_node_t *node;
+	avl_node_t *parent = AVL_INDEX2NODE(where);
+	int old_balance;
+	int new_balance;
+	int which_child = AVL_INDEX2CHILD(where);
+	size_t off = tree->avl_offset;
+
+	ASSERT(tree);
+#ifdef _LP64
+	ASSERT(((uintptr_t)new_data & 0x7) == 0);
+#endif
+
+	node = AVL_DATA2NODE(new_data, off);
+
+	/*
+	 * First, add the node to the tree at the indicated position.
+	 */
+	++tree->avl_numnodes;
+
+	node->avl_child[0] = NULL;
+	node->avl_child[1] = NULL;
+
+	AVL_SETCHILD(node, which_child);
+	AVL_SETBALANCE(node, 0);
+	AVL_SETPARENT(node, parent);
+	if (parent != NULL) {
+		ASSERT(parent->avl_child[which_child] == NULL);
+		parent->avl_child[which_child] = node;
+	} else {
+		ASSERT(tree->avl_root == NULL);
+		tree->avl_root = node;
+	}
+	/*
+	 * Now, back up the tree modifying the balance of all nodes above the
+	 * insertion point. If we get to a highly unbalanced ancestor, we
+	 * need to do a rotation.  If we back out of the tree we are done.
+	 * If we brought any subtree into perfect balance (0), we are also done.
+	 */
+	for (;;) {
+		node = parent;
+		if (node == NULL)
+			return;
+
+		/*
+		 * Compute the new balance
+		 */
+		old_balance = AVL_XBALANCE(node);
+		new_balance = old_balance + avl_child2balance[which_child];
+
+		/*
+		 * If we introduced equal balance, then we are done immediately
+		 */
+		if (new_balance == 0) {
+			AVL_SETBALANCE(node, 0);
+			return;
+		}
+
+		/*
+		 * If both old and new are not zero we went
+		 * from -1 to -2 balance, do a rotation.
+		 */
+		if (old_balance != 0)
+			break;
+
+		AVL_SETBALANCE(node, new_balance);
+		parent = AVL_XPARENT(node);
+		which_child = AVL_XCHILD(node);
+	}
+
+	/*
+	 * perform a rotation to fix the tree and return
+	 */
+	(void) avl_rotation(tree, node, new_balance);
+}
+
+/*
+ * Insert "new_data" in "tree" in the given "direction" either after or
+ * before (AVL_AFTER, AVL_BEFORE) the data "here".
+ *
+ * Insertions can only be done at empty leaf points in the tree, therefore
+ * if the given child of the node is already present we move to either
+ * the AVL_PREV or AVL_NEXT and reverse the insertion direction. Since
+ * every other node in the tree is a leaf, this always works.
+ *
+ * To help developers using this interface, we assert that the new node
+ * is correctly ordered at every step of the way in DEBUG kernels.
+ */
+void
+avl_insert_here(
+	avl_tree_t *tree,
+	void *new_data,
+	void *here,
+	int direction)
+{
+	avl_node_t *node;
+	int child = direction;	/* rely on AVL_BEFORE == 0, AVL_AFTER == 1 */
+#ifdef DEBUG
+	int diff;
+#endif
+
+	ASSERT(tree != NULL);
+	ASSERT(new_data != NULL);
+	ASSERT(here != NULL);
+	ASSERT(direction == AVL_BEFORE || direction == AVL_AFTER);
+
+	/*
+	 * If corresponding child of node is not NULL, go to the neighboring
+	 * node and reverse the insertion direction.
+	 */
+	node = AVL_DATA2NODE(here, tree->avl_offset);
+
+#ifdef DEBUG
+	diff = tree->avl_compar(new_data, here);
+	ASSERT(-1 <= diff && diff <= 1);
+	ASSERT(diff != 0);
+	ASSERT(diff > 0 ? child == 1 : child == 0);
+#endif
+
+	if (node->avl_child[child] != NULL) {
+		node = node->avl_child[child];
+		child = 1 - child;
+		while (node->avl_child[child] != NULL) {
+#ifdef DEBUG
+			diff = tree->avl_compar(new_data,
+			    AVL_NODE2DATA(node, tree->avl_offset));
+			ASSERT(-1 <= diff && diff <= 1);
+			ASSERT(diff != 0);
+			ASSERT(diff > 0 ? child == 1 : child == 0);
+#endif
+			node = node->avl_child[child];
+		}
+#ifdef DEBUG
+		diff = tree->avl_compar(new_data,
+		    AVL_NODE2DATA(node, tree->avl_offset));
+		ASSERT(-1 <= diff && diff <= 1);
+		ASSERT(diff != 0);
+		ASSERT(diff > 0 ? child == 1 : child == 0);
+#endif
+	}
+	ASSERT(node->avl_child[child] == NULL);
+
+	avl_insert(tree, new_data, AVL_MKINDEX(node, child));
+}
+
+/*
+ * Add a new node to an AVL tree.
+ */
+void
+avl_add(avl_tree_t *tree, void *new_node)
+{
+	avl_index_t where;
+
+	/*
+	 * This is unfortunate.  We want to call panic() here, even for
+	 * non-DEBUG kernels.  In userland, however, we can't depend on anything
+	 * in libc or else the rtld build process gets confused.  So, all we can
+	 * do in userland is resort to a normal ASSERT().
+	 */
+	if (avl_find(tree, new_node, &where) != NULL)
+#ifdef _KERNEL
+		panic("avl_find() succeeded inside avl_add()");
+#else
+		ASSERT(0);
+#endif
+	avl_insert(tree, new_node, where);
+}
+
+/*
+ * Delete a node from the AVL tree.  Deletion is similar to insertion, but
+ * with 2 complications.
+ *
+ * First, we may be deleting an interior node. Consider the following subtree:
+ *
+ *     d           c            c
+ *    / \         / \          / \
+ *   b   e       b   e        b   e
+ *  / \	        / \          /
+ * a   c       a            a
+ *
+ * When we are deleting node (d), we find and bring up an adjacent valued leaf
+ * node, say (c), to take the interior node's place. In the code this is
+ * handled by temporarily swapping (d) and (c) in the tree and then using
+ * common code to delete (d) from the leaf position.
+ *
+ * Secondly, an interior deletion from a deep tree may require more than one
+ * rotation to fix the balance. This is handled by moving up the tree through
+ * parents and applying rotations as needed. The return value from
+ * avl_rotation() is used to detect when a subtree did not change overall
+ * height due to a rotation.
+ */
+void
+avl_remove(avl_tree_t *tree, void *data)
+{
+	avl_node_t *delete;
+	avl_node_t *parent;
+	avl_node_t *node;
+	avl_node_t tmp;
+	int old_balance;
+	int new_balance;
+	int left;
+	int right;
+	int which_child;
+	size_t off = tree->avl_offset;
+
+	ASSERT(tree);
+
+	delete = AVL_DATA2NODE(data, off);
+
+	/*
+	 * Deletion is easiest with a node that has at most 1 child.
+	 * We swap a node with 2 children with a sequentially valued
+	 * neighbor node. That node will have at most 1 child. Note this
+	 * has no effect on the ordering of the remaining nodes.
+	 *
+	 * As an optimization, we choose the greater neighbor if the tree
+	 * is right heavy, otherwise the left neighbor. This reduces the
+	 * number of rotations needed.
+	 */
+	if (delete->avl_child[0] != NULL && delete->avl_child[1] != NULL) {
+
+		/*
+		 * choose node to swap from whichever side is taller
+		 */
+		old_balance = AVL_XBALANCE(delete);
+		left = avl_balance2child[old_balance + 1];
+		right = 1 - left;
+
+		/*
+		 * get to the previous value'd node
+		 * (down 1 left, as far as possible right)
+		 */
+		for (node = delete->avl_child[left];
+		    node->avl_child[right] != NULL;
+		    node = node->avl_child[right])
+			;
+
+		/*
+		 * create a temp placeholder for 'node'
+		 * move 'node' to delete's spot in the tree
+		 */
+		tmp = *node;
+
+		*node = *delete;
+		if (node->avl_child[left] == node)
+			node->avl_child[left] = &tmp;
+
+		parent = AVL_XPARENT(node);
+		if (parent != NULL)
+			parent->avl_child[AVL_XCHILD(node)] = node;
+		else
+			tree->avl_root = node;
+		AVL_SETPARENT(node->avl_child[left], node);
+		AVL_SETPARENT(node->avl_child[right], node);
+
+		/*
+		 * Put tmp where node used to be (just temporary).
+		 * It always has a parent and at most 1 child.
+		 */
+		delete = &tmp;
+		parent = AVL_XPARENT(delete);
+		parent->avl_child[AVL_XCHILD(delete)] = delete;
+		which_child = (delete->avl_child[1] != 0);
+		if (delete->avl_child[which_child] != NULL)
+			AVL_SETPARENT(delete->avl_child[which_child], delete);
+	}
+
+
+	/*
+	 * Here we know "delete" is at least partially a leaf node. It can
+	 * be easily removed from the tree.
+	 */
+	ASSERT(tree->avl_numnodes > 0);
+	--tree->avl_numnodes;
+	parent = AVL_XPARENT(delete);
+	which_child = AVL_XCHILD(delete);
+	if (delete->avl_child[0] != NULL)
+		node = delete->avl_child[0];
+	else
+		node = delete->avl_child[1];
+
+	/*
+	 * Connect parent directly to node (leaving out delete).
+	 */
+	if (node != NULL) {
+		AVL_SETPARENT(node, parent);
+		AVL_SETCHILD(node, which_child);
+	}
+	if (parent == NULL) {
+		tree->avl_root = node;
+		return;
+	}
+	parent->avl_child[which_child] = node;
+
+
+	/*
+	 * Since the subtree is now shorter, begin adjusting parent balances
+	 * and performing any needed rotations.
+	 */
+	do {
+
+		/*
+		 * Move up the tree and adjust the balance
+		 *
+		 * Capture the parent and which_child values for the next
+		 * iteration before any rotations occur.
+		 */
+		node = parent;
+		old_balance = AVL_XBALANCE(node);
+		new_balance = old_balance - avl_child2balance[which_child];
+		parent = AVL_XPARENT(node);
+		which_child = AVL_XCHILD(node);
+
+		/*
+		 * If a node was in perfect balance but isn't anymore then
+		 * we can stop, since the height didn't change above this point
+		 * due to a deletion.
+		 */
+		if (old_balance == 0) {
+			AVL_SETBALANCE(node, new_balance);
+			break;
+		}
+
+		/*
+		 * If the new balance is zero, we don't need to rotate
+		 * else
+		 * need a rotation to fix the balance.
+		 * If the rotation doesn't change the height
+		 * of the sub-tree we have finished adjusting.
+		 */
+		if (new_balance == 0)
+			AVL_SETBALANCE(node, new_balance);
+		else if (!avl_rotation(tree, node, new_balance))
+			break;
+	} while (parent != NULL);
+}
+
+#define	AVL_REINSERT(tree, obj)		\
+	avl_remove((tree), (obj));	\
+	avl_add((tree), (obj))
+
+boolean_t
+avl_update_lt(avl_tree_t *t, void *obj)
+{
+	void *neighbor;
+
+	ASSERT(((neighbor = AVL_NEXT(t, obj)) == NULL) ||
+	    (t->avl_compar(obj, neighbor) <= 0));
+
+	neighbor = AVL_PREV(t, obj);
+	if ((neighbor != NULL) && (t->avl_compar(obj, neighbor) < 0)) {
+		AVL_REINSERT(t, obj);
+		return (B_TRUE);
+	}
+
+	return (B_FALSE);
+}
+
+boolean_t
+avl_update_gt(avl_tree_t *t, void *obj)
+{
+	void *neighbor;
+
+	ASSERT(((neighbor = AVL_PREV(t, obj)) == NULL) ||
+	    (t->avl_compar(obj, neighbor) >= 0));
+
+	neighbor = AVL_NEXT(t, obj);
+	if ((neighbor != NULL) && (t->avl_compar(obj, neighbor) > 0)) {
+		AVL_REINSERT(t, obj);
+		return (B_TRUE);
+	}
+
+	return (B_FALSE);
+}
+
+boolean_t
+avl_update(avl_tree_t *t, void *obj)
+{
+	void *neighbor;
+
+	neighbor = AVL_PREV(t, obj);
+	if ((neighbor != NULL) && (t->avl_compar(obj, neighbor) < 0)) {
+		AVL_REINSERT(t, obj);
+		return (B_TRUE);
+	}
+
+	neighbor = AVL_NEXT(t, obj);
+	if ((neighbor != NULL) && (t->avl_compar(obj, neighbor) > 0)) {
+		AVL_REINSERT(t, obj);
+		return (B_TRUE);
+	}
+
+	return (B_FALSE);
+}
+
+/*
+ * initialize a new AVL tree
+ */
+void
+avl_create(avl_tree_t *tree, int (*compar) (const void *, const void *),
+    size_t size, size_t offset)
+{
+	ASSERT(tree);
+	ASSERT(compar);
+	ASSERT(size > 0);
+	ASSERT(size >= offset + sizeof (avl_node_t));
+#ifdef _LP64
+	ASSERT((offset & 0x7) == 0);
+#endif
+
+	tree->avl_compar = compar;
+	tree->avl_root = NULL;
+	tree->avl_numnodes = 0;
+	tree->avl_size = size;
+	tree->avl_offset = offset;
+}
+
+/*
+ * Delete a tree.
+ */
+/* ARGSUSED */
+void
+avl_destroy(avl_tree_t *tree)
+{
+	ASSERT(tree);
+	ASSERT(tree->avl_numnodes == 0);
+	ASSERT(tree->avl_root == NULL);
+}
+
+
+/*
+ * Return the number of nodes in an AVL tree.
+ */
+ulong_t
+avl_numnodes(avl_tree_t *tree)
+{
+	ASSERT(tree);
+	return (tree->avl_numnodes);
+}
+
+boolean_t
+avl_is_empty(avl_tree_t *tree)
+{
+	ASSERT(tree);
+	return (tree->avl_numnodes == 0);
+}
+
+#define	CHILDBIT	(1L)
+
+/*
+ * Post-order tree walk used to visit all tree nodes and destroy the tree
+ * in post order. This is used for destroying a tree w/o paying any cost
+ * for rebalancing it.
+ *
+ * example:
+ *
+ *	void *cookie = NULL;
+ *	my_data_t *node;
+ *
+ *	while ((node = avl_destroy_nodes(tree, &cookie)) != NULL)
+ *		free(node);
+ *	avl_destroy(tree);
+ *
+ * The cookie is really an avl_node_t to the current node's parent and
+ * an indication of which child you looked at last.
+ *
+ * On input, a cookie value of CHILDBIT indicates the tree is done.
+ */
+void *
+avl_destroy_nodes(avl_tree_t *tree, void **cookie)
+{
+	avl_node_t	*node;
+	avl_node_t	*parent;
+	int		child;
+	void		*first;
+	size_t		off = tree->avl_offset;
+
+	/*
+	 * Initial calls go to the first node or it's right descendant.
+	 */
+	if (*cookie == NULL) {
+		first = avl_first(tree);
+
+		/*
+		 * deal with an empty tree
+		 */
+		if (first == NULL) {
+			*cookie = (void *)CHILDBIT;
+			return (NULL);
+		}
+
+		node = AVL_DATA2NODE(first, off);
+		parent = AVL_XPARENT(node);
+		goto check_right_side;
+	}
+
+	/*
+	 * If there is no parent to return to we are done.
+	 */
+	parent = (avl_node_t *)((uintptr_t)(*cookie) & ~CHILDBIT);
+	if (parent == NULL) {
+		if (tree->avl_root != NULL) {
+			ASSERT(tree->avl_numnodes == 1);
+			tree->avl_root = NULL;
+			tree->avl_numnodes = 0;
+		}
+		return (NULL);
+	}
+
+	/*
+	 * Remove the child pointer we just visited from the parent and tree.
+	 */
+	child = (uintptr_t)(*cookie) & CHILDBIT;
+	parent->avl_child[child] = NULL;
+	ASSERT(tree->avl_numnodes > 1);
+	--tree->avl_numnodes;
+
+	/*
+	 * If we just did a right child or there isn't one, go up to parent.
+	 */
+	if (child == 1 || parent->avl_child[1] == NULL) {
+		node = parent;
+		parent = AVL_XPARENT(parent);
+		goto done;
+	}
+
+	/*
+	 * Do parent's right child, then leftmost descendent.
+	 */
+	node = parent->avl_child[1];
+	while (node->avl_child[0] != NULL) {
+		parent = node;
+		node = node->avl_child[0];
+	}
+
+	/*
+	 * If here, we moved to a left child. It may have one
+	 * child on the right (when balance == +1).
+	 */
+check_right_side:
+	if (node->avl_child[1] != NULL) {
+		ASSERT(AVL_XBALANCE(node) == 1);
+		parent = node;
+		node = node->avl_child[1];
+		ASSERT(node->avl_child[0] == NULL &&
+		    node->avl_child[1] == NULL);
+	} else {
+		ASSERT(AVL_XBALANCE(node) <= 0);
+	}
+
+done:
+	if (parent == NULL) {
+		*cookie = (void *)CHILDBIT;
+		ASSERT(node == tree->avl_root);
+	} else {
+		*cookie = (void *)((uintptr_t)parent | AVL_XCHILD(node));
+	}
+
+	return (AVL_NODE2DATA(node, off));
+}
diff --git a/module/avl/include/sys/avl.h b/module/avl/include/sys/avl.h
new file mode 100644
index 000000000..02263a5a0
--- /dev/null
+++ b/module/avl/include/sys/avl.h
@@ -0,0 +1,311 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*
+ * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
+ * Use is subject to license terms.
+ */
+
+#ifndef	_AVL_H
+#define	_AVL_H
+
+#pragma ident	"%Z%%M%	%I%	%E% SMI"
+
+/*
+ * This is a private header file.  Applications should not directly include
+ * this file.
+ */
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+#include <sys/types.h>
+#include <sys/avl_impl.h>
+
+/*
+ * This is a generic implemenatation of AVL trees for use in the Solaris kernel.
+ * The interfaces provide an efficient way of implementing an ordered set of
+ * data structures.
+ *
+ * AVL trees provide an alternative to using an ordered linked list. Using AVL
+ * trees will usually be faster, however they requires more storage. An ordered
+ * linked list in general requires 2 pointers in each data structure. The
+ * AVL tree implementation uses 3 pointers. The following chart gives the
+ * approximate performance of operations with the different approaches:
+ *
+ *	Operation	 Link List	AVL tree
+ *	---------	 --------	--------
+ *	lookup		   O(n)		O(log(n))
+ *
+ *	insert 1 node	 constant	constant
+ *
+ *	delete 1 node	 constant	between constant and O(log(n))
+ *
+ *	delete all nodes   O(n)		O(n)
+ *
+ *	visit the next
+ *	or prev node	 constant	between constant and O(log(n))
+ *
+ *
+ * The data structure nodes are anchored at an "avl_tree_t" (the equivalent
+ * of a list header) and the individual nodes will have a field of
+ * type "avl_node_t" (corresponding to list pointers).
+ *
+ * The type "avl_index_t" is used to indicate a position in the list for
+ * certain calls.
+ *
+ * The usage scenario is generally:
+ *
+ * 1. Create the list/tree with: avl_create()
+ *
+ * followed by any mixture of:
+ *
+ * 2a. Insert nodes with: avl_add(), or avl_find() and avl_insert()
+ *
+ * 2b. Visited elements with:
+ *	 avl_first() - returns the lowest valued node
+ *	 avl_last() - returns the highest valued node
+ *	 AVL_NEXT() - given a node go to next higher one
+ *	 AVL_PREV() - given a node go to previous lower one
+ *
+ * 2c.  Find the node with the closest value either less than or greater
+ *	than a given value with avl_nearest().
+ *
+ * 2d. Remove individual nodes from the list/tree with avl_remove().
+ *
+ * and finally when the list is being destroyed
+ *
+ * 3. Use avl_destroy_nodes() to quickly process/free up any remaining nodes.
+ *    Note that once you use avl_destroy_nodes(), you can no longer
+ *    use any routine except avl_destroy_nodes() and avl_destoy().
+ *
+ * 4. Use avl_destroy() to destroy the AVL tree itself.
+ *
+ * Any locking for multiple thread access is up to the user to provide, just
+ * as is needed for any linked list implementation.
+ */
+
+
+/*
+ * Type used for the root of the AVL tree.
+ */
+typedef struct avl_tree avl_tree_t;
+
+/*
+ * The data nodes in the AVL tree must have a field of this type.
+ */
+typedef struct avl_node avl_node_t;
+
+/*
+ * An opaque type used to locate a position in the tree where a node
+ * would be inserted.
+ */
+typedef uintptr_t avl_index_t;
+
+
+/*
+ * Direction constants used for avl_nearest().
+ */
+#define	AVL_BEFORE	(0)
+#define	AVL_AFTER	(1)
+
+
+/*
+ * Prototypes
+ *
+ * Where not otherwise mentioned, "void *" arguments are a pointer to the
+ * user data structure which must contain a field of type avl_node_t.
+ *
+ * Also assume the user data structures looks like:
+ *	stuct my_type {
+ *		...
+ *		avl_node_t	my_link;
+ *		...
+ *	};
+ */
+
+/*
+ * Initialize an AVL tree. Arguments are:
+ *
+ * tree   - the tree to be initialized
+ * compar - function to compare two nodes, it must return exactly: -1, 0, or +1
+ *          -1 for <, 0 for ==, and +1 for >
+ * size   - the value of sizeof(struct my_type)
+ * offset - the value of OFFSETOF(struct my_type, my_link)
+ */
+extern void avl_create(avl_tree_t *tree,
+	int (*compar) (const void *, const void *), size_t size, size_t offset);
+
+
+/*
+ * Find a node with a matching value in the tree. Returns the matching node
+ * found. If not found, it returns NULL and then if "where" is not NULL it sets
+ * "where" for use with avl_insert() or avl_nearest().
+ *
+ * node   - node that has the value being looked for
+ * where  - position for use with avl_nearest() or avl_insert(), may be NULL
+ */
+extern void *avl_find(avl_tree_t *tree, void *node, avl_index_t *where);
+
+/*
+ * Insert a node into the tree.
+ *
+ * node   - the node to insert
+ * where  - position as returned from avl_find()
+ */
+extern void avl_insert(avl_tree_t *tree, void *node, avl_index_t where);
+
+/*
+ * Insert "new_data" in "tree" in the given "direction" either after
+ * or before the data "here".
+ *
+ * This might be usefull for avl clients caching recently accessed
+ * data to avoid doing avl_find() again for insertion.
+ *
+ * new_data	- new data to insert
+ * here		- existing node in "tree"
+ * direction	- either AVL_AFTER or AVL_BEFORE the data "here".
+ */
+extern void avl_insert_here(avl_tree_t *tree, void *new_data, void *here,
+    int direction);
+
+
+/*
+ * Return the first or last valued node in the tree. Will return NULL
+ * if the tree is empty.
+ *
+ */
+extern void *avl_first(avl_tree_t *tree);
+extern void *avl_last(avl_tree_t *tree);
+
+
+/*
+ * Return the next or previous valued node in the tree.
+ * AVL_NEXT() will return NULL if at the last node.
+ * AVL_PREV() will return NULL if at the first node.
+ *
+ * node   - the node from which the next or previous node is found
+ */
+#define	AVL_NEXT(tree, node)	avl_walk(tree, node, AVL_AFTER)
+#define	AVL_PREV(tree, node)	avl_walk(tree, node, AVL_BEFORE)
+
+
+/*
+ * Find the node with the nearest value either greater or less than
+ * the value from a previous avl_find(). Returns the node or NULL if
+ * there isn't a matching one.
+ *
+ * where     - position as returned from avl_find()
+ * direction - either AVL_BEFORE or AVL_AFTER
+ *
+ * EXAMPLE get the greatest node that is less than a given value:
+ *
+ *	avl_tree_t *tree;
+ *	struct my_data look_for_value = {....};
+ *	struct my_data *node;
+ *	struct my_data *less;
+ *	avl_index_t where;
+ *
+ *	node = avl_find(tree, &look_for_value, &where);
+ *	if (node != NULL)
+ *		less = AVL_PREV(tree, node);
+ *	else
+ *		less = avl_nearest(tree, where, AVL_BEFORE);
+ */
+extern void *avl_nearest(avl_tree_t *tree, avl_index_t where, int direction);
+
+
+/*
+ * Add a single node to the tree.
+ * The node must not be in the tree, and it must not
+ * compare equal to any other node already in the tree.
+ *
+ * node   - the node to add
+ */
+extern void avl_add(avl_tree_t *tree, void *node);
+
+
+/*
+ * Remove a single node from the tree.  The node must be in the tree.
+ *
+ * node   - the node to remove
+ */
+extern void avl_remove(avl_tree_t *tree, void *node);
+
+/*
+ * Reinsert a node only if its order has changed relative to its nearest
+ * neighbors. To optimize performance avl_update_lt() checks only the previous
+ * node and avl_update_gt() checks only the next node. Use avl_update_lt() and
+ * avl_update_gt() only if you know the direction in which the order of the
+ * node may change.
+ */
+extern boolean_t avl_update(avl_tree_t *, void *);
+extern boolean_t avl_update_lt(avl_tree_t *, void *);
+extern boolean_t avl_update_gt(avl_tree_t *, void *);
+
+/*
+ * Return the number of nodes in the tree
+ */
+extern ulong_t avl_numnodes(avl_tree_t *tree);
+
+/*
+ * Return B_TRUE if there are zero nodes in the tree, B_FALSE otherwise.
+ */
+extern boolean_t avl_is_empty(avl_tree_t *tree);
+
+/*
+ * Used to destroy any remaining nodes in a tree. The cookie argument should
+ * be initialized to NULL before the first call. Returns a node that has been
+ * removed from the tree and may be free()'d. Returns NULL when the tree is
+ * empty.
+ *
+ * Once you call avl_destroy_nodes(), you can only continuing calling it and
+ * finally avl_destroy(). No other AVL routines will be valid.
+ *
+ * cookie - a "void *" used to save state between calls to avl_destroy_nodes()
+ *
+ * EXAMPLE:
+ *	avl_tree_t *tree;
+ *	struct my_data *node;
+ *	void *cookie;
+ *
+ *	cookie = NULL;
+ *	while ((node = avl_destroy_nodes(tree, &cookie)) != NULL)
+ *		free(node);
+ *	avl_destroy(tree);
+ */
+extern void *avl_destroy_nodes(avl_tree_t *tree, void **cookie);
+
+
+/*
+ * Final destroy of an AVL tree. Arguments are:
+ *
+ * tree   - the empty tree to destroy
+ */
+extern void avl_destroy(avl_tree_t *tree);
+
+
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif	/* _AVL_H */
diff --git a/module/avl/include/sys/avl_impl.h b/module/avl/include/sys/avl_impl.h
new file mode 100644
index 000000000..620685f37
--- /dev/null
+++ b/module/avl/include/sys/avl_impl.h
@@ -0,0 +1,164 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License, Version 1.0 only
+ * (the "License").  You may not use this file except in compliance
+ * with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*
+ * Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
+ * Use is subject to license terms.
+ */
+
+#ifndef	_AVL_IMPL_H
+#define	_AVL_IMPL_H
+
+#pragma ident	"%Z%%M%	%I%	%E% SMI"
+
+/*
+ * This is a private header file.  Applications should not directly include
+ * this file.
+ */
+
+#include <sys/types.h>
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+
+/*
+ * generic AVL tree implementation for kernel use
+ *
+ * There are 5 pieces of information stored for each node in an AVL tree
+ *
+ * 	pointer to less than child
+ * 	pointer to greater than child
+ * 	a pointer to the parent of this node
+ *	an indication  [0/1]  of which child I am of my parent
+ * 	a "balance" (-1, 0, +1)  indicating which child tree is taller
+ *
+ * Since they only need 3 bits, the last two fields are packed into the
+ * bottom bits of the parent pointer on 64 bit machines to save on space.
+ */
+
+#ifndef _LP64
+
+struct avl_node {
+	struct avl_node *avl_child[2];	/* left/right children */
+	struct avl_node *avl_parent;	/* this node's parent */
+	unsigned short avl_child_index;	/* my index in parent's avl_child[] */
+	short avl_balance;		/* balance value: -1, 0, +1 */
+};
+
+#define	AVL_XPARENT(n)		((n)->avl_parent)
+#define	AVL_SETPARENT(n, p)	((n)->avl_parent = (p))
+
+#define	AVL_XCHILD(n)		((n)->avl_child_index)
+#define	AVL_SETCHILD(n, c)	((n)->avl_child_index = (unsigned short)(c))
+
+#define	AVL_XBALANCE(n)		((n)->avl_balance)
+#define	AVL_SETBALANCE(n, b)	((n)->avl_balance = (short)(b))
+
+#else /* _LP64 */
+
+/*
+ * for 64 bit machines, avl_pcb contains parent pointer, balance and child_index
+ * values packed in the following manner:
+ *
+ * |63                                  3|        2        |1          0 |
+ * |-------------------------------------|-----------------|-------------|
+ * |      avl_parent hi order bits       | avl_child_index | avl_balance |
+ * |                                     |                 |     + 1     |
+ * |-------------------------------------|-----------------|-------------|
+ *
+ */
+struct avl_node {
+	struct avl_node *avl_child[2];	/* left/right children nodes */
+	uintptr_t avl_pcb;		/* parent, child_index, balance */
+};
+
+/*
+ * macros to extract/set fields in avl_pcb
+ *
+ * pointer to the parent of the current node is the high order bits
+ */
+#define	AVL_XPARENT(n)		((struct avl_node *)((n)->avl_pcb & ~7))
+#define	AVL_SETPARENT(n, p)						\
+	((n)->avl_pcb = (((n)->avl_pcb & 7) | (uintptr_t)(p)))
+
+/*
+ * index of this node in its parent's avl_child[]: bit #2
+ */
+#define	AVL_XCHILD(n)		(((n)->avl_pcb >> 2) & 1)
+#define	AVL_SETCHILD(n, c)						\
+	((n)->avl_pcb = (uintptr_t)(((n)->avl_pcb & ~4) | ((c) << 2)))
+
+/*
+ * balance indication for a node, lowest 2 bits. A valid balance is
+ * -1, 0, or +1, and is encoded by adding 1 to the value to get the
+ * unsigned values of 0, 1, 2.
+ */
+#define	AVL_XBALANCE(n)		((int)(((n)->avl_pcb & 3) - 1))
+#define	AVL_SETBALANCE(n, b)						\
+	((n)->avl_pcb = (uintptr_t)((((n)->avl_pcb & ~3) | ((b) + 1))))
+
+#endif /* _LP64 */
+
+
+
+/*
+ * switch between a node and data pointer for a given tree
+ * the value of "o" is tree->avl_offset
+ */
+#define	AVL_NODE2DATA(n, o)	((void *)((uintptr_t)(n) - (o)))
+#define	AVL_DATA2NODE(d, o)	((struct avl_node *)((uintptr_t)(d) + (o)))
+
+
+
+/*
+ * macros used to create/access an avl_index_t
+ */
+#define	AVL_INDEX2NODE(x)	((avl_node_t *)((x) & ~1))
+#define	AVL_INDEX2CHILD(x)	((x) & 1)
+#define	AVL_MKINDEX(n, c)	((avl_index_t)(n) | (c))
+
+
+/*
+ * The tree structure. The fields avl_root, avl_compar, and avl_offset come
+ * first since they are needed for avl_find().  We want them to fit into
+ * a single 64 byte cache line to make avl_find() as fast as possible.
+ */
+struct avl_tree {
+	struct avl_node *avl_root;	/* root node in tree */
+	int (*avl_compar)(const void *, const void *);
+	size_t avl_offset;		/* offsetof(type, avl_link_t field) */
+	ulong_t avl_numnodes;		/* number of nodes in the tree */
+	size_t avl_size;		/* sizeof user type struct */
+};
+
+
+/*
+ * This will only by used via AVL_NEXT() or AVL_PREV()
+ */
+extern void *avl_walk(struct avl_tree *, void *, int);
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif	/* _AVL_IMPL_H */