Add vdev_id for JBOD-friendly udev aliases

vdev_id parses the file /etc/zfs/vdev_id.conf to map a physical path
in a storage topology to a channel name.  The channel name is combined
with a disk enclosure slot number to create an alias that reflects the
physical location of the drive.  This is particularly helpful when it
comes to tasks like replacing failed drives.  Slot numbers may also be
re-mapped in case the default numbering is unsatisfactory.  The drive
aliases will be created as symbolic links in /dev/disk/by-vdev.

The only currently supported topologies are sas_direct and sas_switch:

o  sas_direct - a channel is uniquely identified by a PCI slot and a
   HBA port

o  sas_switch - a channel is uniquely identified by a SAS switch port

A multipath mode is supported in which dm-mpath devices are handled by
examining the first running component disk, as reported by 'multipath
-l'.  In multipath mode the configuration file should contain a
channel definition with the same name for each path to a given
enclosure.

vdev_id can replace the existing zpool_id script on systems where the
storage topology conforms to sas_direct or sas_switch.  The script
could be extended to support other topologies as well.  The advantage
of vdev_id is that it is driven by a single static input file that can
be shared across multiple nodes having a common storage toplogy.
zpool_id, on the other hand, requires a unique /etc/zfs/zdev.conf per
node and a separate slot-mapping file.  However, zpool_id provides the
flexibility of using any device names that show up in
/dev/disk/by-path, so it may still be needed on some systems.

vdev_id's functionality subsumes that of the sas_switch_id script, and
it is unlikely that anyone is using it, so sas_switch_id is removed.

Finally, /dev/disk/by-vdev is added to the list of directories that
'zpool import' will scan.

Signed-off-by: Brian Behlendorf <[email protected]>
Closes #713

8 files changed, 806 insertions, 4 deletions

diff --git a/man/Makefile.am b/man/Makefile.am
index 1602da107..0ccc5b491 100644
--- a/man/Makefile.am
+++ b/man/Makefile.am
@@ -1 +1 @@
-SUBDIRS = man8
+SUBDIRS = man5 man8
diff --git a/man/Makefile.in b/man/Makefile.in
index 601361249..bd23249e6 100644
--- a/man/Makefile.in
+++ b/man/Makefile.in
@@ -328,7 +328,7 @@ top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 udevdir = @udevdir@
 udevruledir = @udevruledir@
-SUBDIRS = man8
+SUBDIRS = man5 man8
 all: all-recursive
 
 .SUFFIXES:
diff --git a/man/man5/Makefile.am b/man/man5/Makefile.am
new file mode 100644
index 000000000..9bb25fd23
--- /dev/null
+++ b/man/man5/Makefile.am
@@ -0,0 +1,5 @@
+man_MANS = vdev_id.conf.5
+EXTRA_DIST = $(man_MANS)
+
+install-data-local:
+	$(INSTALL) -d -m 0755 "$(DESTDIR)$(mandir)/man5"
diff --git a/man/man5/Makefile.in b/man/man5/Makefile.in
new file mode 100644
index 000000000..2684134a1
--- /dev/null
+++ b/man/man5/Makefile.in
@@ -0,0 +1,565 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = man/man5
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps =  \
+	$(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
+	$(top_srcdir)/config/kernel-automount.m4 \
+	$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
+	$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
+	$(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
+	$(top_srcdir)/config/kernel-bdi.m4 \
+	$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
+	$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
+	$(top_srcdir)/config/kernel-bio-failfast.m4 \
+	$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
+	$(top_srcdir)/config/kernel-blk-end-request.m4 \
+	$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
+	$(top_srcdir)/config/kernel-blk-queue-discard.m4 \
+	$(top_srcdir)/config/kernel-blk-queue-flush.m4 \
+	$(top_srcdir)/config/kernel-blk-queue-io-opt.m4 \
+	$(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
+	$(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
+	$(top_srcdir)/config/kernel-blk-queue-nonrot.m4 \
+	$(top_srcdir)/config/kernel-blk-queue-physical-block-size.m4 \
+	$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
+	$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
+	$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
+	$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
+	$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
+	$(top_srcdir)/config/kernel-check-disk-size-change.m4 \
+	$(top_srcdir)/config/kernel-create-umode-t.m4 \
+	$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
+	$(top_srcdir)/config/kernel-evict-inode.m4 \
+	$(top_srcdir)/config/kernel-fallocate.m4 \
+	$(top_srcdir)/config/kernel-fmode-t.m4 \
+	$(top_srcdir)/config/kernel-fsync.m4 \
+	$(top_srcdir)/config/kernel-get-disk-ro.m4 \
+	$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
+	$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
+	$(top_srcdir)/config/kernel-kobj-name-len.m4 \
+	$(top_srcdir)/config/kernel-mount-nodev.m4 \
+	$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
+	$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
+	$(top_srcdir)/config/kernel-rq-is_sync.m4 \
+	$(top_srcdir)/config/kernel-security-inode-init.m4 \
+	$(top_srcdir)/config/kernel-set-nlink.m4 \
+	$(top_srcdir)/config/kernel-show-options.m4 \
+	$(top_srcdir)/config/kernel-shrink.m4 \
+	$(top_srcdir)/config/kernel-truncate-setsize.m4 \
+	$(top_srcdir)/config/kernel-xattr-handler.m4 \
+	$(top_srcdir)/config/kernel.m4 \
+	$(top_srcdir)/config/user-arch.m4 \
+	$(top_srcdir)/config/user-frame-larger-than.m4 \
+	$(top_srcdir)/config/user-ioctl.m4 \
+	$(top_srcdir)/config/user-libblkid.m4 \
+	$(top_srcdir)/config/user-libuuid.m4 \
+	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
+	$(top_srcdir)/config/user-udev.m4 \
+	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
+	$(top_srcdir)/config/zfs-build.m4 \
+	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/zfs_config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+man5dir = $(mandir)/man5
+am__installdirs = "$(DESTDIR)$(man5dir)"
+NROFF = nroff
+MANS = $(man_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALIEN = @ALIEN@
+ALIEN_VERSION = @ALIEN_VERSION@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_CFLAGS = @DEBUG_CFLAGS@
+DEBUG_DMU_TX = @DEBUG_DMU_TX@
+DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
+DEBUG_ZFS = @DEBUG_ZFS@
+DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
+DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
+DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DPKG = @DPKG@
+DPKGBUILD = @DPKGBUILD@
+DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
+DPKG_VERSION = @DPKG_VERSION@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
+GREP = @GREP@
+HAVE_ALIEN = @HAVE_ALIEN@
+HAVE_DPKG = @HAVE_DPKG@
+HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
+HAVE_MAKEPKG = @HAVE_MAKEPKG@
+HAVE_PACMAN = @HAVE_PACMAN@
+HAVE_RPM = @HAVE_RPM@
+HAVE_RPMBUILD = @HAVE_RPMBUILD@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+KERNELCPPFLAGS = @KERNELCPPFLAGS@
+KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBBLKID = @LIBBLKID@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
+LIBTOOL = @LIBTOOL@
+LIBUUID = @LIBUUID@
+LINUX = @LINUX@
+LINUX_OBJ = @LINUX_OBJ@
+LINUX_SYMBOLS = @LINUX_SYMBOLS@
+LINUX_VERSION = @LINUX_VERSION@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MAKEPKG = @MAKEPKG@
+MAKEPKG_VERSION = @MAKEPKG_VERSION@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PACMAN = @PACMAN@
+PACMAN_VERSION = @PACMAN_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RPM = @RPM@
+RPMBUILD = @RPMBUILD@
+RPMBUILD_VERSION = @RPMBUILD_VERSION@
+RPM_VERSION = @RPM_VERSION@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SPL = @SPL@
+SPL_OBJ = @SPL_OBJ@
+SPL_SYMBOLS = @SPL_SYMBOLS@
+SPL_VERSION = @SPL_VERSION@
+STRIP = @STRIP@
+TARGET_ASM_DIR = @TARGET_ASM_DIR@
+VENDOR = @VENDOR@
+VERSION = @VERSION@
+ZFS_CONFIG = @ZFS_CONFIG@
+ZFS_META_ALIAS = @ZFS_META_ALIAS@
+ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
+ZFS_META_DATA = @ZFS_META_DATA@
+ZFS_META_LICENSE = @ZFS_META_LICENSE@
+ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
+ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
+ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
+ZFS_META_NAME = @ZFS_META_NAME@
+ZFS_META_RELEASE = @ZFS_META_RELEASE@
+ZFS_META_VERSION = @ZFS_META_VERSION@
+ZLIB = @ZLIB@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+udevdir = @udevdir@
+udevruledir = @udevruledir@
+man_MANS = vdev_id.conf.5
+EXTRA_DIST = $(man_MANS)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/man5/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu man/man5/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man5: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
+	@list=''; test -n "$(man5dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.5[a-z]*$$/p'; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man5:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man5dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.5[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	test -z "$$files" || { \
+	  echo " ( cd '$(DESTDIR)$(man5dir)' && rm -f" $$files ")"; \
+	  cd "$(DESTDIR)$(man5dir)" && rm -f $$files; }
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+	for dir in "$(DESTDIR)$(man5dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man5
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man5
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man5 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am uninstall uninstall-am uninstall-man uninstall-man5
+
+
+install-data-local:
+	$(INSTALL) -d -m 0755 "$(DESTDIR)$(mandir)/man5"
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/man/man5/vdev_id.conf.5 b/man/man5/vdev_id.conf.5
new file mode 100644
index 000000000..e449360d1
--- /dev/null
+++ b/man/man5/vdev_id.conf.5
@@ -0,0 +1,160 @@
+.TH vdev_id.conf 5
+.SH NAME
+vdev_id.conf \- Configuration file for vdev_id
+.SH DESCRIPTION
+.I vdev_id.conf
+is the configuration file for
+.BR vdev_id (8).
+It controls the default behavior of
+.BR vdev_id (8)
+while it is mapping a disk device name to an alias.
+.PP
+The
+.I vdev_id.conf
+file uses a simple format consisting of a keyword followed by one or
+more values on a single line.  Any line not beginning with a recognized
+keyword is ignored.  Comments may optionally begin with a hash
+character.
+
+The following keywords and values are used.
+.TP
+\fIchannel\fR [pci_slot] <port> <name>
+Maps a physical path to a channel name (typically representing a single
+disk enclosure).
+
+\fIpci_slot\fR - specifies the PCI SLOT of the HBA
+hosting the disk enclosure being mapped, as found in the output of
+.BR lspci (8).
+This argument is not used in sas_switch mode.
+
+\fIport\fR - specifies the numeric identifier of the HBA or SAS switch port
+connected to the disk enclosure being mapped.
+
+\fIname\fR - specifies the name of the channel.
+
+.TP
+\fIslot\fR <old> <new>
+Maps a disk slot number as reported by the operating system
+to an alternative slot number.
+.TP
+\fImultipath\fR <yes|no>
+Specifies whether
+.BR vdev_id (8)
+will handle only dm-multipath devices.  If set to "yes" then
+.BR vdev_id (8)
+will examine the first running component disk of a dm-multipath
+device as listed by the
+.BR multipath (8)
+command to determine the physical path.
+.TP
+\fItopology\fR <sas_direct|sas_switch>
+Identifies a physical topology that governs how physical paths are
+mapped to channels.
+
+\fIsas_direct\fR - in this mode a channel is uniquely identified by
+a PCI slot and a HBA port number
+
+\fIsas_switch\fR - in this mode a channel is uniquely identified by
+a SAS switch port number
+
+.TP
+\fIphys_per_port\fR <num>
+Specifies the number of PHY devices are associated with a SAS HBA port or SAS
+switch port.
+.BR vdev_id (8)
+internally uses this value to determine which HBA or switch port a
+device is connected to.  The default is 4.
+.SH EXAMPLES
+A non-multipath configuration with direct-attached SAS enclosures and an
+arbitrary slot re-mapping.
+.P
+	multipath     no
+.br
+	topology      sas_direct
+.br
+	phys_per_port 4
+.br
+
+.br
+	#       PCI_SLOT HBA PORT  CHANNEL NAME
+.br
+	channel 85:00.0  1         A
+.br
+	channel 85:00.0  0         B
+.br
+	channel 86:00.0  1         C
+.br
+	channel 86:00.0  0         D
+.br
+
+.br
+	#    Linux      Mapped
+.br
+	#    Slot       Slot
+.br
+	slot 1          7
+.br
+	slot 2          10
+.br
+	slot 3          3
+.br
+	slot 4          6
+.br
+	slot 5          2
+.br
+	slot 6          8
+.br
+	slot 7          1
+.br
+	slot 8          4
+.br
+	slot 9          9
+.br
+	slot 10         5
+.br
+.P
+A SAS-switch topology.  Note that the
+.I channel
+keyword takes only two arguments in this example.
+.P
+	topology      sas_switch
+.br
+
+.br
+	#       SWITCH PORT  CHANNEL NAME
+.br
+	channel 1            A
+.br
+	channel 2            B
+.br
+	channel 3            C
+.br
+	channel 4            D
+.br
+.P
+A multipath configuration.  Note that channel names have multiple
+definitions - one per physical path.
+.P
+	multipath yes
+.br
+
+.br
+	#       PCI_SLOT HBA PORT  CHANNEL NAME
+.br
+	channel 85:00.0  1         A
+.br
+	channel 85:00.0  0         B
+.br
+	channel 86:00.0  1         A
+.br
+	channel 86:00.0  0         B
+.br
+.P
+
+.SH FILES
+.TP
+.I /etc/zfs/vdev_id.conf
+The configuration file for
+.BR vdev_id (8).
+.SH SEE ALSO
+.BR vdev_id (8)
diff --git a/man/man8/Makefile.am b/man/man8/Makefile.am
index 8f0227f88..619d74fc3 100644
--- a/man/man8/Makefile.am
+++ b/man/man8/Makefile.am
@@ -1,4 +1,4 @@
-man_MANS = zdb.8 zfs.8 zpool.8
+man_MANS = vdev_id.8 zdb.8 zfs.8 zpool.8
 EXTRA_DIST = $(man_MANS)
 
 install-data-local:
diff --git a/man/man8/Makefile.in b/man/man8/Makefile.in
index e50bb5a0e..feac99675 100644
--- a/man/man8/Makefile.in
+++ b/man/man8/Makefile.in
@@ -313,7 +313,7 @@ top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 udevdir = @udevdir@
 udevruledir = @udevruledir@
-man_MANS = zdb.8 zfs.8 zpool.8
+man_MANS = vdev_id.8 zdb.8 zfs.8 zpool.8
 EXTRA_DIST = $(man_MANS)
 all: all-am
 
diff --git a/man/man8/vdev_id.8 b/man/man8/vdev_id.8
new file mode 100644
index 000000000..612a50bbe
--- /dev/null
+++ b/man/man8/vdev_id.8
@@ -0,0 +1,72 @@
+.TH vdev_id 8
+.SH NAME
+vdev_id \- generate user-friendly names for JBOD disks
+.SH SYNOPSIS
+.LP
+.nf
+\fBvdev_id\fR <-d dev> [-c config_file] [-g sas_direct|sas_switch]
+                 [-m] [-p phys_per_port]
+\fBvdev_id\fR -h
+.fi
+.SH DESCRIPTION
+The \fBvdev_id\fR command is a udev helper which parses the file
+.BR /etc/zfs/vdev_id.conf (5)
+to map a physical path in a storage topology to a channel name.  The
+channel name is combined with a disk enclosure slot number to create an
+alias that reflects the physical location of the drive.  This is
+particularly helpful when it comes to tasks like replacing failed
+drives.  Slot numbers may also be re-mapped in case the default
+numbering is unsatisfactory.  The drive aliases will be created as
+symbolic links in /dev/disk/by-vdev.
+
+The only currently supported topologies are sas_direct and
+sas_switch.  A multipath mode is supported in which dm-mpath
+devices are handled by examining the first-listed running
+component disk as reported by the
+.BR multipath (8)
+command.  In multipath mode the configuration file should contain a
+channel definition with the same name for each path to a given
+enclosure.
+
+.SH OPTIONS
+.TP
+\fB\-c\fR <config_file>
+Specifies the path to an alternate configuration file.  The default is
+/etc/zfs/vdev_id.conf.
+.TP
+\fB\-d\fR <device>
+This is the only mandatory argument.  Specifies the name of a device
+in /dev, i.e. "sda".
+.TP
+\fB\-g\fR <sas_direct|sas_switch>
+Identifies a physical topology that governs how physical paths are
+mapped to channels.
+
+\fIsas_direct\fR - in this mode a channel is uniquely identified by
+a PCI slot and a HBA port number
+
+\fIsas_switch\fR - in this mode a channel is uniquely identified by
+a SAS switch port number
+.TP
+\fB\-m\fR
+Specifies that
+.BR vdev_id (8)
+will handle only dm-multipath devices.  If set to "yes" then
+.BR vdev_id (8)
+will examine the first running component disk of a dm-multipath
+device as listed by the
+.BR multipath (8)
+command to determine the physical path.
+.TP
+\fB\-p\fR <phys_per_port>
+Specifies the number of PHY devices associated with a SAS HBA port or SAS
+switch port.
+.BR vdev_id (8)
+internally uses this value to determine which HBA or switch port a
+device is connected to.  The default is 4.
+.TP
+\fB\-h\fR
+Print a usage summary.
+.SH SEE ALSO
+.LP
+\fBvdev_id.conf\fR(5)