Move a few internal ARC strucutres to arc_impl.h

Add a new file named arc_impl.h and move a few internal
ARC structure definitions into this file. This is
needed in order to allow the Linux tracepoint functions to grub
around in the internals of these structures.

Signed-off-by: Prakash Surya <[email protected]>
Signed-off-by: Ned Bass <[email protected]>
Signed-off-by: Brian Behlendorf <[email protected]>

2 files changed, 158 insertions, 0 deletions

diff --git a/include/sys/Makefile.am b/include/sys/Makefile.am
index a755b394d..2c0cadd40 100644
--- a/include/sys/Makefile.am
+++ b/include/sys/Makefile.am
@@ -2,6 +2,7 @@ SUBDIRS = fm fs
 
 COMMON_H = \
 	$(top_srcdir)/include/sys/arc.h \
+	$(top_srcdir)/include/sys/arc_impl.h \
 	$(top_srcdir)/include/sys/avl.h \
 	$(top_srcdir)/include/sys/avl_impl.h \
 	$(top_srcdir)/include/sys/blkptr.h \
diff --git a/include/sys/arc_impl.h b/include/sys/arc_impl.h
new file mode 100644
index 000000000..f7e1295a5
--- /dev/null
+++ b/include/sys/arc_impl.h
@@ -0,0 +1,157 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+/*
+ * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
+ * Copyright (c) 2013 by Delphix. All rights reserved.
+ * Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
+ * Copyright 2013 Nexenta Systems, Inc.  All rights reserved.
+ */
+
+#ifndef _SYS_ARC_IMPL_H
+#define	_SYS_ARC_IMPL_H
+
+#include <sys/arc.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Note that buffers can be in one of 6 states:
+ *	ARC_anon	- anonymous (discussed below)
+ *	ARC_mru		- recently used, currently cached
+ *	ARC_mru_ghost	- recentely used, no longer in cache
+ *	ARC_mfu		- frequently used, currently cached
+ *	ARC_mfu_ghost	- frequently used, no longer in cache
+ *	ARC_l2c_only	- exists in L2ARC but not other states
+ * When there are no active references to the buffer, they are
+ * are linked onto a list in one of these arc states.  These are
+ * the only buffers that can be evicted or deleted.  Within each
+ * state there are multiple lists, one for meta-data and one for
+ * non-meta-data.  Meta-data (indirect blocks, blocks of dnodes,
+ * etc.) is tracked separately so that it can be managed more
+ * explicitly: favored over data, limited explicitly.
+ *
+ * Anonymous buffers are buffers that are not associated with
+ * a DVA.  These are buffers that hold dirty block copies
+ * before they are written to stable storage.  By definition,
+ * they are "ref'd" and are considered part of arc_mru
+ * that cannot be freed.  Generally, they will aquire a DVA
+ * as they are written and migrate onto the arc_mru list.
+ *
+ * The ARC_l2c_only state is for buffers that are in the second
+ * level ARC but no longer in any of the ARC_m* lists.  The second
+ * level ARC itself may also contain buffers that are in any of
+ * the ARC_m* states - meaning that a buffer can exist in two
+ * places.  The reason for the ARC_l2c_only state is to keep the
+ * buffer header in the hash table, so that reads that hit the
+ * second level ARC benefit from these fast lookups.
+ */
+
+typedef struct arc_state {
+	list_t	arcs_list[ARC_BUFC_NUMTYPES];	/* list of evictable buffers */
+	uint64_t arcs_lsize[ARC_BUFC_NUMTYPES];	/* amount of evictable data */
+	uint64_t arcs_size;	/* total amount of data in this state */
+	kmutex_t arcs_mtx;
+	arc_state_type_t arcs_state;
+} arc_state_t;
+
+typedef struct l2arc_buf_hdr l2arc_buf_hdr_t;
+
+typedef struct arc_callback arc_callback_t;
+
+struct arc_callback {
+	void			*acb_private;
+	arc_done_func_t		*acb_done;
+	arc_buf_t		*acb_buf;
+	zio_t			*acb_zio_dummy;
+	arc_callback_t		*acb_next;
+};
+
+typedef struct arc_write_callback arc_write_callback_t;
+
+struct arc_write_callback {
+	void		*awcb_private;
+	arc_done_func_t	*awcb_ready;
+	arc_done_func_t	*awcb_physdone;
+	arc_done_func_t	*awcb_done;
+	arc_buf_t	*awcb_buf;
+};
+
+struct arc_buf_hdr {
+	/* protected by hash lock */
+	dva_t			b_dva;
+	uint64_t		b_birth;
+	uint64_t		b_cksum0;
+
+	kmutex_t		b_freeze_lock;
+	zio_cksum_t		*b_freeze_cksum;
+
+	arc_buf_hdr_t		*b_hash_next;
+	arc_buf_t		*b_buf;
+	uint32_t		b_flags;
+	uint32_t		b_datacnt;
+
+	arc_callback_t		*b_acb;
+	kcondvar_t		b_cv;
+
+	/* immutable */
+	arc_buf_contents_t	b_type;
+	uint64_t		b_size;
+	uint64_t		b_spa;
+
+	/* protected by arc state mutex */
+	arc_state_t		*b_state;
+	list_node_t		b_arc_node;
+
+	/* updated atomically */
+	clock_t			b_arc_access;
+	uint32_t		b_mru_hits;
+	uint32_t		b_mru_ghost_hits;
+	uint32_t		b_mfu_hits;
+	uint32_t		b_mfu_ghost_hits;
+	uint32_t		b_l2_hits;
+
+	/* self protecting */
+	refcount_t		b_refcnt;
+
+	l2arc_buf_hdr_t		*b_l2hdr;
+	list_node_t		b_l2node;
+};
+
+typedef struct l2arc_dev {
+	vdev_t			*l2ad_vdev;	/* vdev */
+	spa_t			*l2ad_spa;	/* spa */
+	uint64_t		l2ad_hand;	/* next write location */
+	uint64_t		l2ad_start;	/* first addr on device */
+	uint64_t		l2ad_end;	/* last addr on device */
+	uint64_t		l2ad_evict;	/* last addr eviction reached */
+	boolean_t		l2ad_first;	/* first sweep through */
+	boolean_t		l2ad_writing;	/* currently writing */
+	list_t			*l2ad_buflist;	/* buffer list */
+	list_node_t		l2ad_node;	/* device list node */
+} l2arc_dev_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _SYS_ARC_IMPL_H */