Add Linux Compat Infrastructure

Lay the initial ground work for a include/linux/ compatibility
directory.  This was less critical in the past because the bulk
of the ZFS code consumes the Solaris API via the SPL.  This API
was stable and the bulk Linux API differences were handled in
the SPL.

However, with the addition of a full Posix layer written directly
against the Linux APIs we are going to need more compatibility
code.  It makes sense that all this code should be cleanly located
in one place.  Subsequent patches should move the existing zvol
and vdev_disk compatibility code in to this directory.

6 files changed, 622 insertions, 2 deletions

diff --git a/include/Makefile.am b/include/Makefile.am
index 0926c6a69..1d7493bb5 100644
--- a/include/Makefile.am
+++ b/include/Makefile.am
@@ -1,4 +1,4 @@
-SUBDIRS = sys
+SUBDIRS = linux sys
 
 COMMON_H = \
 	$(top_srcdir)/include/zfs_comutil.h \
diff --git a/include/Makefile.in b/include/Makefile.in
index 851bd8a12..f87cd7929 100644
--- a/include/Makefile.in
+++ b/include/Makefile.in
@@ -332,7 +332,7 @@ target_vendor = @target_vendor@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-SUBDIRS = sys
+SUBDIRS = linux sys
 COMMON_H = \
 	$(top_srcdir)/include/zfs_comutil.h \
 	$(top_srcdir)/include/zfs_deleg.h \
diff --git a/include/linux/Makefile.am b/include/linux/Makefile.am
new file mode 100644
index 000000000..4ccd7b124
--- /dev/null
+++ b/include/linux/Makefile.am
@@ -0,0 +1,18 @@
+COMMON_H =
+
+KERNEL_H = \
+	$(top_srcdir)/include/linux/dcache_compat.h
+
+USER_H =
+
+EXTRA_DIST = $(COMMON_H) $(KERNEL_H) $(USER_H)
+
+if CONFIG_USER
+libzfsdir = $(includedir)/libzfs/linux
+libzfs_HEADERS = $(COMMON_H) $(USER_H)
+endif
+
+if CONFIG_KERNEL
+kerneldir = /usr/src/zfs-$(ZFS_META_VERSION)/$(LINUX_VERSION)/linux
+kernel_HEADERS = $(COMMON_H) $(KERNEL_H)
+endif
diff --git a/include/linux/Makefile.in b/include/linux/Makefile.in
new file mode 100644
index 000000000..51d0a6d5b
--- /dev/null
+++ b/include/linux/Makefile.in
@@ -0,0 +1,568 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = include/linux
+DIST_COMMON = $(am__kernel_HEADERS_DIST) $(libzfs_HEADERS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps =  \
+	$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
+	$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
+	$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
+	$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
+	$(top_srcdir)/config/kernel-bio-failfast.m4 \
+	$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
+	$(top_srcdir)/config/kernel-blk-end-request.m4 \
+	$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
+	$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
+	$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
+	$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
+	$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
+	$(top_srcdir)/config/kernel-fmode-t.m4 \
+	$(top_srcdir)/config/kernel-get-disk-ro.m4 \
+	$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
+	$(top_srcdir)/config/kernel-kobj-name-len.m4 \
+	$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
+	$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
+	$(top_srcdir)/config/kernel-rq-is_sync.m4 \
+	$(top_srcdir)/config/kernel.m4 \
+	$(top_srcdir)/config/user-arch.m4 \
+	$(top_srcdir)/config/user-frame-larger-than.m4 \
+	$(top_srcdir)/config/user-ioctl.m4 \
+	$(top_srcdir)/config/user-libblkid.m4 \
+	$(top_srcdir)/config/user-libuuid.m4 \
+	$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
+	$(top_srcdir)/config/user-selinux.m4 \
+	$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
+	$(top_srcdir)/config/zfs-build.m4 \
+	$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/zfs_config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN   " $@;
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+SOURCES =
+DIST_SOURCES =
+am__kernel_HEADERS_DIST = $(top_srcdir)/include/linux/dcache_compat.h
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(kerneldir)" "$(DESTDIR)$(libzfsdir)"
+HEADERS = $(kernel_HEADERS) $(libzfs_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ALIEN = @ALIEN@
+ALIEN_VERSION = @ALIEN_VERSION@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEBUG_CFLAGS = @DEBUG_CFLAGS@
+DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
+DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DPKG = @DPKG@
+DPKGBUILD = @DPKGBUILD@
+DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
+DPKG_VERSION = @DPKG_VERSION@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
+GREP = @GREP@
+HAVE_ALIEN = @HAVE_ALIEN@
+HAVE_DPKG = @HAVE_DPKG@
+HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
+HAVE_RPM = @HAVE_RPM@
+HAVE_RPMBUILD = @HAVE_RPMBUILD@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+KERNELCPPFLAGS = @KERNELCPPFLAGS@
+KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBBLKID = @LIBBLKID@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
+LIBTOOL = @LIBTOOL@
+LIBUUID = @LIBUUID@
+LINUX = @LINUX@
+LINUX_OBJ = @LINUX_OBJ@
+LINUX_SYMBOLS = @LINUX_SYMBOLS@
+LINUX_VERSION = @LINUX_VERSION@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RPM = @RPM@
+RPMBUILD = @RPMBUILD@
+RPMBUILD_VERSION = @RPMBUILD_VERSION@
+RPM_VERSION = @RPM_VERSION@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SPL = @SPL@
+SPL_OBJ = @SPL_OBJ@
+SPL_SYMBOLS = @SPL_SYMBOLS@
+SPL_VERSION = @SPL_VERSION@
+STRIP = @STRIP@
+TARGET_ASM_DIR = @TARGET_ASM_DIR@
+VENDOR = @VENDOR@
+VERSION = @VERSION@
+ZFS_CONFIG = @ZFS_CONFIG@
+ZFS_META_ALIAS = @ZFS_META_ALIAS@
+ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
+ZFS_META_DATA = @ZFS_META_DATA@
+ZFS_META_LICENSE = @ZFS_META_LICENSE@
+ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
+ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
+ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
+ZFS_META_NAME = @ZFS_META_NAME@
+ZFS_META_RELEASE = @ZFS_META_RELEASE@
+ZFS_META_VERSION = @ZFS_META_VERSION@
+ZLIB = @ZLIB@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+COMMON_H = 
+KERNEL_H = \
+	$(top_srcdir)/include/linux/dcache_compat.h
+
+USER_H = 
+EXTRA_DIST = $(COMMON_H) $(KERNEL_H) $(USER_H)
+@CONFIG_USER_TRUE@libzfsdir = $(includedir)/libzfs/linux
+@CONFIG_USER_TRUE@libzfs_HEADERS = $(COMMON_H) $(USER_H)
+@CONFIG_KERNEL_TRUE@kerneldir = /usr/src/zfs-$(ZFS_META_VERSION)/$(LINUX_VERSION)/linux
+@CONFIG_KERNEL_TRUE@kernel_HEADERS = $(COMMON_H) $(KERNEL_H)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu include/linux/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu include/linux/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-kernelHEADERS: $(kernel_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(kerneldir)" || $(MKDIR_P) "$(DESTDIR)$(kerneldir)"
+	@list='$(kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(kerneldir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(kerneldir)" || exit $$?; \
+	done
+
+uninstall-kernelHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(kernel_HEADERS)'; test -n "$(kerneldir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(kerneldir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(kerneldir)" && rm -f $$files
+install-libzfsHEADERS: $(libzfs_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(libzfsdir)" || $(MKDIR_P) "$(DESTDIR)$(libzfsdir)"
+	@list='$(libzfs_HEADERS)'; test -n "$(libzfsdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libzfsdir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libzfsdir)" || exit $$?; \
+	done
+
+uninstall-libzfsHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(libzfs_HEADERS)'; test -n "$(libzfsdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(libzfsdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(libzfsdir)" && rm -f $$files
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(kerneldir)" "$(DESTDIR)$(libzfsdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-kernelHEADERS install-libzfsHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-kernelHEADERS uninstall-libzfsHEADERS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libtool ctags distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-kernelHEADERS install-libzfsHEADERS \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags uninstall uninstall-am uninstall-kernelHEADERS \
+	uninstall-libzfsHEADERS
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/include/linux/dcache_compat.h b/include/linux/dcache_compat.h
new file mode 100644
index 000000000..a624d4dd9
--- /dev/null
+++ b/include/linux/dcache_compat.h
@@ -0,0 +1,33 @@
+/*
+ * CDDL HEADER START
+ *
+ * The contents of this file are subject to the terms of the
+ * Common Development and Distribution License (the "License").
+ * You may not use this file except in compliance with the License.
+ *
+ * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+ * or http://www.opensolaris.org/os/licensing.
+ * See the License for the specific language governing permissions
+ * and limitations under the License.
+ *
+ * When distributing Covered Code, include this CDDL HEADER in each
+ * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+ * If applicable, add the following below this CDDL HEADER, with the
+ * fields enclosed by brackets "[]" replaced with your own identifying
+ * information: Portions Copyright [yyyy] [name of copyright owner]
+ *
+ * CDDL HEADER END
+ */
+
+/*
+ * Copyright (C) 2011 Lawrence Livermore National Security, LLC.
+ */
+
+#ifndef _ZFS_DCACHE_H
+#define _ZFS_DCACHE_H
+
+#include <linux/dcache.h>
+
+#define dname(dentry)	((char *)((dentry)->d_name.name))
+
+#endif /* _ZFS_DCACHE_H */
diff --git a/include/sys/zfs_context.h b/include/sys/zfs_context.h
index 0ebacbc64..a0165bb2f 100644
--- a/include/sys/zfs_context.h
+++ b/include/sys/zfs_context.h
@@ -57,6 +57,7 @@
 #include <sys/zfs_debug.h>
 #include <sys/fm/fs/zfs.h>
 #include <sys/sunddi.h>
+#include <linux/dcache_compat.h>
 
 #else /* _KERNEL */