Build system and packaging (RPM support)

An update to the build system to properly support all commonly
used Makefile targets these include:

  make all        # Build everything
  make install    # Install everything
  make clean	  # Clean up build products
  make distclean  # Clean up everything
  make dist       # Create package tarball
  make srpm       # Create package source RPM
  make rpm        # Create package binary RPMs
  make tags       # Create ctags and etags for everything

Extra care was taken to ensure that the source RPMs are fully
rebuildable against Fedora/RHEL/Chaos kernels.  To build binary
RPMs from the source RPM for your system simply run:

  rpmbuild --rebuild spl-x.y.z-1.src.rpm

This will produce two binary RPMs with correct 'requires'
dependencies for your kernel.  One will contain all spl modules
and support utilities, the other is a devel package for compiling
additional kernel modules which are dependant on the spl.

  spl-x.y.z-1_<kernel version>.x86_64.rpm
  spl-devel-x.y.2-1_<kernel version>.x86_64.rpm

1 files changed, 73 insertions, 144 deletions

diff --git a/include/Makefile.in b/include/Makefile.in
index 10f3779fe..4dfe80800 100644
--- a/include/Makefile.in
+++ b/include/Makefile.in
@@ -13,6 +13,7 @@
 # PARTICULAR PURPOSE.
 
 @SET_MAKE@
+
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@
@@ -37,7 +38,8 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = include
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(nobase_include_HEADERS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/config/spl-build.m4 \
 	$(top_srcdir)/config/spl-meta.m4 $(top_srcdir)/configure.ac
@@ -48,15 +50,17 @@ CONFIG_HEADER = $(top_builddir)/spl_config.h
 CONFIG_CLEAN_FILES =
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(includedir)"
+nobase_includeHEADERS_INSTALL = $(install_sh_DATA)
+HEADERS = $(nobase_include_HEADERS)
 ETAGS = etags
 CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMDEP_FALSE = @AMDEP_FALSE@
@@ -100,6 +104,7 @@ LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
 LINUX = @LINUX@
 LINUX_OBJ = @LINUX_OBJ@
+LINUX_VERSION = @LINUX_VERSION@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
@@ -160,7 +165,6 @@ host_vendor = @host_vendor@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
-kmoduledir = @kmoduledir@
 libdir = @libdir@
 libexecdir = @libexecdir@
 localstatedir = @localstatedir@
@@ -177,9 +181,14 @@ target_alias = @target_alias@
 target_cpu = @target_cpu@
 target_os = @target_os@
 target_vendor = @target_vendor@
-SUBDIRS = asm linux rpc sys util fs sharefs vm
-EXTRA_DIST = *.h
-all: all-recursive
+
+# All headers are referenced by this top level Makefile.am and the
+# nobase_* rule is used to ensure all path information is preserved
+# when using the 'make install' target.
+nobase_include_HEADERS = *.h asm/*.h fs/*.h linux/*.h rpc/*.h \
+	sharefs/*.h sys/fm/*.h sys/fs/*.h sys/sysevent/*.h sys/*.h \
+	util/*.h vm/*.h
+all: all-am
 
 .SUFFIXES:
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
@@ -221,76 +230,24 @@ clean-libtool:
 distclean-libtool:
 	-rm -f libtool
 uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+install-nobase_includeHEADERS: $(nobase_include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
+	@$(am__vpath_adj_setup) \
+	list='$(nobase_include_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__vpath_adj) \
+	  echo " $(nobase_includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
+	  $(nobase_includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
 	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+
+uninstall-nobase_includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@$(am__vpath_adj_setup) \
+	list='$(nobase_include_HEADERS)'; for p in $$list; do \
+	  $(am__vpath_adj) \
+	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -303,23 +260,10 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	mkid -fID $$unique
 tags: TAGS
 
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
@@ -332,7 +276,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	    $$tags $$unique; \
 	fi
 ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
@@ -355,6 +299,7 @@ distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
+	$(mkdir_p) $(distdir)/asm $(distdir)/fs $(distdir)/linux $(distdir)/rpc $(distdir)/sharefs $(distdir)/sys $(distdir)/sys/fm $(distdir)/sys/fs $(distdir)/sys/sysevent $(distdir)/util $(distdir)/vm
 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
 	list='$(DISTFILES)'; for file in $$list; do \
@@ -381,35 +326,22 @@ distdir: $(DISTFILES)
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(mkdir_p) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
 check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
+check: check-am
+all-am: Makefile $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 
-installcheck: installcheck-recursive
+installcheck: installcheck-am
 install-strip:
 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
@@ -425,67 +357,64 @@ distclean-generic:
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
+clean: clean-am
 
 clean-am: clean-generic clean-libtool mostlyclean-am
 
-distclean: distclean-recursive
+distclean: distclean-am
 	-rm -f Makefile
 distclean-am: clean-am distclean-generic distclean-libtool \
 	distclean-tags
 
-dvi: dvi-recursive
+dvi: dvi-am
 
 dvi-am:
 
-html: html-recursive
+html: html-am
 
-info: info-recursive
+info: info-am
 
 info-am:
 
-install-data-am:
+install-data-am: install-nobase_includeHEADERS
 
 install-exec-am:
 
-install-info: install-info-recursive
+install-info: install-info-am
 
 install-man:
 
 installcheck-am:
 
-maintainer-clean: maintainer-clean-recursive
+maintainer-clean: maintainer-clean-am
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
-mostlyclean: mostlyclean-recursive
+mostlyclean: mostlyclean-am
 
 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 
-pdf: pdf-recursive
+pdf: pdf-am
 
 pdf-am:
 
-ps: ps-recursive
+ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
+uninstall-am: uninstall-info-am uninstall-nobase_includeHEADERS
 
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
-	clean clean-generic clean-libtool clean-recursive ctags \
-	ctags-recursive distclean distclean-generic distclean-libtool \
-	distclean-recursive distclean-tags distdir dvi dvi-am html \
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libtool ctags distclean distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
 	html-am info info-am install install-am install-data \
 	install-data-am install-exec install-exec-am install-info \
-	install-info-am install-man install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic maintainer-clean-recursive \
-	mostlyclean mostlyclean-generic mostlyclean-libtool \
-	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am uninstall-info-am
+	install-info-am install-man install-nobase_includeHEADERS \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-info-am \
+	uninstall-nobase_includeHEADERS
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.