OpenZFS 9681 - ztest failure in spa_history_log_internal due to spa_rename()

Authored by: Matthew Ahrens <[email protected]>
Reviewed by: Prakash Surya <[email protected]>
Reviewed by: Serapheim Dimitropoulos <[email protected]>
Reviewed by: George Melikov <[email protected]>
Reviewed by: Tom Caputi <[email protected]>
Approved by: Robert Mustacchi <[email protected]>
Ported-by: Brian Behlendorf <[email protected]>

OpenZFS-issue: https://www.illumos.org/issues/9681
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/6aee0ad7
Closes #8041

3 files changed, 0 insertions, 132 deletions

diff --git a/cmd/ztest/ztest.c b/cmd/ztest/ztest.c
index cfd7bc12f..f277312c6 100644
--- a/cmd/ztest/ztest.c
+++ b/cmd/ztest/ztest.c
@@ -358,7 +358,6 @@ ztest_func_t ztest_fault_inject;
 ztest_func_t ztest_ddt_repair;
 ztest_func_t ztest_dmu_snapshot_hold;
 ztest_func_t ztest_mmp_enable_disable;
-ztest_func_t ztest_spa_rename;
 ztest_func_t ztest_scrub;
 ztest_func_t ztest_dsl_dataset_promote_busy;
 ztest_func_t ztest_vdev_attach_detach;
@@ -414,7 +413,6 @@ ztest_info_t ztest_info[] = {
 	ZTI_INIT(ztest_dmu_snapshot_hold, 1, &zopt_sometimes),
 	ZTI_INIT(ztest_mmp_enable_disable, 1, &zopt_sometimes),
 	ZTI_INIT(ztest_reguid, 1, &zopt_rarely),
-	ZTI_INIT(ztest_spa_rename, 1, &zopt_rarely),
 	ZTI_INIT(ztest_scrub, 1, &zopt_rarely),
 	ZTI_INIT(ztest_spa_upgrade, 1, &zopt_rarely),
 	ZTI_INIT(ztest_dsl_dataset_promote_busy, 1, &zopt_rarely),
@@ -6122,62 +6120,6 @@ ztest_reguid(ztest_ds_t *zd, uint64_t id)
 	VERIFY3U(load, ==, spa_load_guid(spa));
 }
 
-/*
- * Rename the pool to a different name and then rename it back.
- */
-/* ARGSUSED */
-void
-ztest_spa_rename(ztest_ds_t *zd, uint64_t id)
-{
-	char *oldname, *newname;
-	spa_t *spa;
-
-	if (ztest_opts.zo_mmp_test)
-		return;
-
-	(void) pthread_rwlock_wrlock(&ztest_name_lock);
-
-	oldname = ztest_opts.zo_pool;
-	newname = umem_alloc(strlen(oldname) + 5, UMEM_NOFAIL);
-	(void) strcpy(newname, oldname);
-	(void) strcat(newname, "_tmp");
-
-	/*
-	 * Do the rename
-	 */
-	VERIFY3U(0, ==, spa_rename(oldname, newname));
-
-	/*
-	 * Try to open it under the old name, which shouldn't exist
-	 */
-	VERIFY3U(ENOENT, ==, spa_open(oldname, &spa, FTAG));
-
-	/*
-	 * Open it under the new name and make sure it's still the same spa_t.
-	 */
-	VERIFY3U(0, ==, spa_open(newname, &spa, FTAG));
-
-	ASSERT(spa == ztest_spa);
-	spa_close(spa, FTAG);
-
-	/*
-	 * Rename it back to the original
-	 */
-	VERIFY3U(0, ==, spa_rename(newname, oldname));
-
-	/*
-	 * Make sure it can still be opened
-	 */
-	VERIFY3U(0, ==, spa_open(oldname, &spa, FTAG));
-
-	ASSERT(spa == ztest_spa);
-	spa_close(spa, FTAG);
-
-	umem_free(newname, strlen(newname) + 1);
-
-	(void) pthread_rwlock_unlock(&ztest_name_lock);
-}
-
 void
 ztest_fletcher(ztest_ds_t *zd, uint64_t id)
 {
@@ -7399,7 +7341,6 @@ main(int argc, char **argv)
 	ztest_shared_callstate_t *zc;
 	char timebuf[100];
 	char numbuf[NN_NUMBUF_SZ];
-	spa_t *spa;
 	char *cmd;
 	boolean_t hasalt;
 	int f;
@@ -7601,24 +7542,6 @@ main(int argc, char **argv)
 			(void) printf("\n");
 		}
 
-		/*
-		 * It's possible that we killed a child during a rename test,
-		 * in which case we'll have a 'ztest_tmp' pool lying around
-		 * instead of 'ztest'.  Do a blind rename in case this happened.
-		 */
-		kernel_init(FREAD);
-		if (spa_open(ztest_opts.zo_pool, &spa, FTAG) == 0) {
-			spa_close(spa, FTAG);
-		} else {
-			char tmpname[ZFS_MAX_DATASET_NAME_LEN];
-			kernel_fini();
-			kernel_init(FREAD | FWRITE);
-			(void) snprintf(tmpname, sizeof (tmpname), "%s_tmp",
-			    ztest_opts.zo_pool);
-			(void) spa_rename(tmpname, ztest_opts.zo_pool);
-		}
-		kernel_fini();
-
 		if (!ztest_opts.zo_mmp_test)
 			ztest_run_zdb(ztest_opts.zo_pool);
 	}
diff --git a/include/sys/spa.h b/include/sys/spa.h
index 443d835a1..ca657ad70 100644
--- a/include/sys/spa.h
+++ b/include/sys/spa.h
@@ -1009,7 +1009,6 @@ extern void spa_load_note(spa_t *spa, const char *fmt, ...);
 extern void spa_activate_mos_feature(spa_t *spa, const char *feature,
     dmu_tx_t *tx);
 extern void spa_deactivate_mos_feature(spa_t *spa, const char *feature);
-extern int spa_rename(const char *oldname, const char *newname);
 extern spa_t *spa_by_guid(uint64_t pool_guid, uint64_t device_guid);
 extern boolean_t spa_guid_exists(uint64_t pool_guid, uint64_t device_guid);
 extern char *spa_strdup(const char *);
diff --git a/module/zfs/spa_misc.c b/module/zfs/spa_misc.c
index 0a7b7b92e..ae9eb4de7 100644
--- a/module/zfs/spa_misc.c
+++ b/module/zfs/spa_misc.c
@@ -225,9 +225,6 @@
  * vdev state is protected by spa_vdev_state_enter() / spa_vdev_state_exit().
  * Like spa_vdev_enter/exit, these are convenience wrappers -- the actual
  * locking is, always, based on spa_namespace_lock and spa_config_lock[].
- *
- * spa_rename() is also implemented within this file since it requires
- * manipulation of the namespace.
  */
 
 static avl_tree_t spa_namespace_avl;
@@ -1336,56 +1333,6 @@ spa_deactivate_mos_feature(spa_t *spa, const char *feature)
 }
 
 /*
- * Rename a spa_t.
- */
-int
-spa_rename(const char *name, const char *newname)
-{
-	spa_t *spa;
-	int err;
-
-	/*
-	 * Lookup the spa_t and grab the config lock for writing.  We need to
-	 * actually open the pool so that we can sync out the necessary labels.
-	 * It's OK to call spa_open() with the namespace lock held because we
-	 * allow recursive calls for other reasons.
-	 */
-	mutex_enter(&spa_namespace_lock);
-	if ((err = spa_open(name, &spa, FTAG)) != 0) {
-		mutex_exit(&spa_namespace_lock);
-		return (err);
-	}
-
-	spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
-
-	avl_remove(&spa_namespace_avl, spa);
-	(void) strlcpy(spa->spa_name, newname, sizeof (spa->spa_name));
-	avl_add(&spa_namespace_avl, spa);
-
-	/*
-	 * Sync all labels to disk with the new names by marking the root vdev
-	 * dirty and waiting for it to sync.  It will pick up the new pool name
-	 * during the sync.
-	 */
-	vdev_config_dirty(spa->spa_root_vdev);
-
-	spa_config_exit(spa, SCL_ALL, FTAG);
-
-	txg_wait_synced(spa->spa_dsl_pool, 0);
-
-	/*
-	 * Sync the updated config cache.
-	 */
-	spa_write_cachefile(spa, B_FALSE, B_TRUE);
-
-	spa_close(spa, FTAG);
-
-	mutex_exit(&spa_namespace_lock);
-
-	return (0);
-}
-
-/*
  * Return the spa_t associated with given pool_guid, if it exists.  If
  * device_guid is non-zero, determine whether the pool exists *and* contains
  * a device with the specified device_guid.
@@ -2633,7 +2580,6 @@ EXPORT_SYMBOL(spa_maxblocksize);
 EXPORT_SYMBOL(spa_maxdnodesize);
 
 /* Miscellaneous support routines */
-EXPORT_SYMBOL(spa_rename);
 EXPORT_SYMBOL(spa_guid_exists);
 EXPORT_SYMBOL(spa_strdup);
 EXPORT_SYMBOL(spa_strfree);