Soft to hard tabs

For consistency with the upstream sources and the rest of the
project use hard instead of soft tabs.

Signed-off-by: Brian Behlendorf <[email protected]>

3 files changed, 114 insertions, 114 deletions

diff --git a/dracut/90zfs/module-setup.sh b/dracut/90zfs/module-setup.sh
index 1816b38d7..6dd3d5c17 100755
--- a/dracut/90zfs/module-setup.sh
+++ b/dracut/90zfs/module-setup.sh
@@ -1,46 +1,46 @@
 #!/bin/sh
 
 check() {
-  # We depend on udev-rules being loaded
-  [ "$1" = "-d" ] && return 0
+	# We depend on udev-rules being loaded
+	[ "$1" = "-d" ] && return 0
 
-  # Verify the zfs tool chain
-  which zpool >/dev/null 2>&1 || return 1
-  which zfs >/dev/null 2>&1 || return 1
+	# Verify the zfs tool chain
+	which zpool >/dev/null 2>&1 || return 1
+	which zfs >/dev/null 2>&1 || return 1
 
-  return 0
+	return 0
 }
 
 depends() {
-  echo udev-rules
-  return 0
+	echo udev-rules
+	return 0
 }
 
 installkernel() {
-  instmods zfs
-  instmods zcommon
-  instmods znvpair
-  instmods zavl
-  instmods zunicode
-  instmods spl
-  instmods zlib_deflate
-  instmods zlib_inflate
+	instmods zfs
+	instmods zcommon
+	instmods znvpair
+	instmods zavl
+	instmods zunicode
+	instmods spl
+	instmods zlib_deflate
+	instmods zlib_inflate
 }
 
 install() {
-  inst_rules "$moddir/90-zfs.rules"
-  inst_rules /etc/udev/rules.d/60-zpool.rules
-  inst_rules /etc/udev/rules.d/60-zvol.rules
-  inst /etc/zfs/zdev.conf
-  inst /etc/zfs/zpool.cache
-  inst /etc/hostid
-  dracut_install zfs
-  dracut_install zpool
-  dracut_install zpool_layout
-  dracut_install zpool_id
-  dracut_install zvol_id
-  dracut_install mount.zfs
-  dracut_install hostid
-  inst_hook cmdline 95 "$moddir/parse-zfs.sh"
-  inst_hook mount 98 "$moddir/mount-zfs.sh"
+	inst_rules "$moddir/90-zfs.rules"
+	inst_rules /etc/udev/rules.d/60-zpool.rules
+	inst_rules /etc/udev/rules.d/60-zvol.rules
+	inst /etc/zfs/zdev.conf
+	inst /etc/zfs/zpool.cache
+	inst /etc/hostid
+	dracut_install zfs
+	dracut_install zpool
+	dracut_install zpool_layout
+	dracut_install zpool_id
+	dracut_install zvol_id
+	dracut_install mount.zfs
+	dracut_install hostid
+	inst_hook cmdline 95 "$moddir/parse-zfs.sh"
+	inst_hook mount 98 "$moddir/mount-zfs.sh"
 }
diff --git a/dracut/90zfs/mount-zfs.sh b/dracut/90zfs/mount-zfs.sh
index e067c18a0..a451bf9f5 100755
--- a/dracut/90zfs/mount-zfs.sh
+++ b/dracut/90zfs/mount-zfs.sh
@@ -4,65 +4,65 @@
 
 ZPOOL_FORCE=""
 if getargbool 0 zfs_force -y zfs.force -y zfsforce ; then
-  warn "ZFS: Will force-import pools if necessary."
-  ZPOOL_FORCE="-f"
+	warn "ZFS: Will force-import pools if necessary."
+	ZPOOL_FORCE="-f"
 fi
 
 case "$root" in
-  zfs:*)
-    # We have ZFS modules loaded, so we're able to import pools now.
-    if [ "$root" = "zfs:AUTO" ] ; then
-      # Need to parse bootfs attribute
-      info "ZFS: Attempting to detect root from imported ZFS pools."
+	zfs:*)
+		# We have ZFS modules loaded, so we're able to import pools now.
+		if [ "$root" = "zfs:AUTO" ] ; then
+			# Need to parse bootfs attribute
+			info "ZFS: Attempting to detect root from imported ZFS pools."
 
-      # Might be imported by the kernel module, so try searching before
-      # we import anything.
-      zfsbootfs=`zpool list -H -o bootfs | sed 'q'`
-      if [ "$zfsbootfs" = "" ] ; then
-        # Not there, so we need to import everything.
-        info "ZFS: Attempting to import additional pools."
-        zpool import -N -a ${ZPOOL_FORCE}
-        zfsbootfs=`zpool list -H -o bootfs | sed 'q'`
-        if [ "$zfsbootfs" = "" ] ; then
-          rootok=0
-          pool=""
+			# Might be imported by the kernel module, so try searching before
+			# we import anything.
+			zfsbootfs=`zpool list -H -o bootfs | sed 'q'`
+			if [ "$zfsbootfs" = "" ] ; then
+				# Not there, so we need to import everything.
+				info "ZFS: Attempting to import additional pools."
+				zpool import -N -a ${ZPOOL_FORCE}
+				zfsbootfs=`zpool list -H -o bootfs | sed 'q'`
+				if [ "$zfsbootfs" = "" ] ; then
+					rootok=0
+					pool=""
 
-          warn "ZFS: No bootfs attribute found in importable pools."
+					warn "ZFS: No bootfs attribute found in importable pools."
 
-          # Re-export everything since we're not prepared to take
-          # responsibility for them.
-          zpool list -H | while read fs rest ; do
-            zpool export "$fs"
-          done
+					# Re-export everything since we're not prepared to take
+					# responsibility for them.
+					zpool list -H | while read fs rest ; do
+						zpool export "$fs"
+					done
 
-          return 1
-        fi
-      fi
-      info "ZFS: Using ${zfsbootfs} as root."
-    else
-      # Should have an explicit pool set, so just import it and we're done.
-      zfsbootfs="${root#zfs:}"
-      pool="${zfsbootfs%%/*}"
-      if ! zpool list -H $pool > /dev/null ; then
-        # pool wasn't imported automatically by the kernel module, so
-        # try it manually.
-        info "ZFS: Importing pool ${pool}..."
-        if ! zpool import -N ${ZPOOL_FORCE} $pool ; then
-          warn "ZFS: Unable to import pool ${pool}."
-          rootok=0
+					return 1
+				fi
+			fi
+			info "ZFS: Using ${zfsbootfs} as root."
+		else
+			# Should have an explicit pool set, so just import it and we're done.
+			zfsbootfs="${root#zfs:}"
+			pool="${zfsbootfs%%/*}"
+			if ! zpool list -H $pool > /dev/null ; then
+				# pool wasn't imported automatically by the kernel module, so
+				# try it manually.
+				info "ZFS: Importing pool ${pool}..."
+				if ! zpool import -N ${ZPOOL_FORCE} $pool ; then
+					warn "ZFS: Unable to import pool ${pool}."
+					rootok=0
 
-          return 1
-        fi
-      fi
-    fi
+					return 1
+				fi
+			fi
+		fi
 
-    # Above should have left our rpool imported and pool/dataset in $root.
-    # We need zfsutil for non-legacy mounts and not for legacy mounts.
-    mountpoint=`zfs get -H -o value mountpoint $zfsbootfs`
-    if [ "$mountpoint" = "legacy" ] ; then
-      mount -t zfs "$zfsbootfs" "$NEWROOT" && ROOTFS_MOUNTED=yes
-    else
-      mount -o zfsutil -t zfs "$zfsbootfs" "$NEWROOT" && ROOTFS_MOUNTED=yes
-    fi
-    ;;
+		# Above should have left our rpool imported and pool/dataset in $root.
+		# We need zfsutil for non-legacy mounts and not for legacy mounts.
+		mountpoint=`zfs get -H -o value mountpoint $zfsbootfs`
+		if [ "$mountpoint" = "legacy" ] ; then
+			mount -t zfs "$zfsbootfs" "$NEWROOT" && ROOTFS_MOUNTED=yes
+		else
+			mount -o zfsutil -t zfs "$zfsbootfs" "$NEWROOT" && ROOTFS_MOUNTED=yes
+		fi
+		;;
 esac
diff --git a/dracut/90zfs/parse-zfs.sh b/dracut/90zfs/parse-zfs.sh
index f8974b95e..a5e84ad19 100755
--- a/dracut/90zfs/parse-zfs.sh
+++ b/dracut/90zfs/parse-zfs.sh
@@ -5,42 +5,42 @@
 # Let the command line override our host id.
 spl_hostid=`getarg spl_hostid=`
 if [ "${spl_hostid}" != "" ] ; then
-  info "ZFS: Using hostid from command line: ${spl_hostid}"
-  echo "${spl_hostid}" > /etc/hostid
+	info "ZFS: Using hostid from command line: ${spl_hostid}"
+	echo "${spl_hostid}" > /etc/hostid
 elif [ -f /etc/hostid ] ; then
-  info "ZFS: Using hostid from /etc/hostid: `cat /etc/hostid`"
+	info "ZFS: Using hostid from /etc/hostid: `cat /etc/hostid`"
 else
-  warn "ZFS: No hostid found on kernel command line or /etc/hostid.  ZFS pools may not import correctly."
+	warn "ZFS: No hostid found on kernel command line or /etc/hostid.  ZFS pools may not import correctly."
 fi
 
 case "$root" in
-  ""|zfs|zfs:)
-    # We'll take root unset, root=zfs, or root=zfs:
-    # No root set, so we want to read the bootfs attribute.  We can't do
-    # that until udev settles so we'll set dummy values and hope for the
-    # best later on.
-    root="zfs:AUTO"
-    rootok=1
-
-    info "ZFS: Enabling autodetection of bootfs after udev settles."
-    ;;
-
-  ZFS\=*|zfs:*|zfs:FILESYSTEM\=*|FILESYSTEM\=*)
-    # root is explicit ZFS root.  Parse it now.
-    # We can handle a root=... param in any of the following formats:
-    # root=ZFS=rpool/ROOT
-    # root=zfs:rpool/ROOT
-    # root=zfs:FILESYSTEM=rpool/ROOT
-    # root=FILESYSTEM=rpool/ROOT
-
-    # Strip down to just the pool/fs
-    root="${root#zfs:}"
-    root="${root#FILESYSTEM=}"
-    root="zfs:${root#ZFS=}"
-    rootok=1
-
-    info "ZFS: Set ${root} as bootfs."
-    ;;
+	""|zfs|zfs:)
+		# We'll take root unset, root=zfs, or root=zfs:
+		# No root set, so we want to read the bootfs attribute.  We can't do
+		# that until udev settles so we'll set dummy values and hope for the
+		# best later on.
+		root="zfs:AUTO"
+		rootok=1
+
+		info "ZFS: Enabling autodetection of bootfs after udev settles."
+		;;
+
+	ZFS\=*|zfs:*|zfs:FILESYSTEM\=*|FILESYSTEM\=*)
+		# root is explicit ZFS root.  Parse it now.
+		# We can handle a root=... param in any of the following formats:
+		# root=ZFS=rpool/ROOT
+		# root=zfs:rpool/ROOT
+		# root=zfs:FILESYSTEM=rpool/ROOT
+		# root=FILESYSTEM=rpool/ROOT
+
+		# Strip down to just the pool/fs
+		root="${root#zfs:}"
+		root="${root#FILESYSTEM=}"
+		root="zfs:${root#ZFS=}"
+		rootok=1
+
+		info "ZFS: Set ${root} as bootfs."
+		;;
 esac
 
 # Make sure Dracut is happy that we have a root and will wait for ZFS