path: root/src/gallium/drivers/softpipe/sp_state_derived.c

/**************************************************************************
 * 
 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
 * All Rights Reserved.
 * 
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sub license, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 * 
 * The above copyright notice and this permission notice (including the
 * next paragraph) shall be included in all copies or substantial portions
 * of the Software.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 * 
 **************************************************************************/

#include "util/u_inlines.h"
#include "util/u_math.h"
#include "util/u_memory.h"
#include "util/u_pstipple.h"
#include "pipe/p_shader_tokens.h"
#include "draw/draw_context.h"
#include "draw/draw_vertex.h"
#include "sp_context.h"
#include "sp_screen.h"
#include "sp_state.h"
#include "sp_texture.h"
#include "sp_tex_tile_cache.h"


/**
 * Mark the current vertex layout as "invalid".
 * We'll validate the vertex layout later, when we start to actually
 * render a point or line or tri.
 */
static void
invalidate_vertex_layout(struct softpipe_context *softpipe)
{
   softpipe->vertex_info.num_attribs =  0;
}


/**
 * The vertex info describes how to convert the post-transformed vertices
 * (simple float[][4]) used by the 'draw' module into vertices for
 * rasterization.
 *
 * This function validates the vertex layout and returns a pointer to a
 * vertex_info object.
 */
struct vertex_info *
softpipe_get_vertex_info(struct softpipe_context *softpipe)
{
   struct vertex_info *vinfo = &softpipe->vertex_info;

   if (vinfo->num_attribs == 0) {
      /* compute vertex layout now */
      const struct tgsi_shader_info *fsInfo = &softpipe->fs_variant->info;
      struct vertex_info *vinfo_vbuf = &softpipe->vertex_info_vbuf;
      const uint num = draw_num_shader_outputs(softpipe->draw);
      uint i;

      /* Tell draw_vbuf to simply emit the whole post-xform vertex
       * as-is.  No longer any need to try and emit draw vertex_header
       * info.
       */
      vinfo_vbuf->num_attribs = 0;
      for (i = 0; i < num; i++) {
	 draw_emit_vertex_attr(vinfo_vbuf, EMIT_4F, INTERP_PERSPECTIVE, i);
      }
      draw_compute_vertex_size(vinfo_vbuf);

      /*
       * Loop over fragment shader inputs, searching for the matching output
       * from the vertex shader.
       */
      vinfo->num_attribs = 0;
      for (i = 0; i < fsInfo->num_inputs; i++) {
         int src;
         enum interp_mode interp = INTERP_LINEAR;

         switch (fsInfo->input_interpolate[i]) {
         case TGSI_INTERPOLATE_CONSTANT:
            interp = INTERP_CONSTANT;
            break;
         case TGSI_INTERPOLATE_LINEAR:
            interp = INTERP_LINEAR;
            break;
         case TGSI_INTERPOLATE_PERSPECTIVE:
            interp = INTERP_PERSPECTIVE;
            break;
         case TGSI_INTERPOLATE_COLOR:
            assert(fsInfo->input_semantic_name[i] == TGSI_SEMANTIC_COLOR);
            break;
         default:
            assert(0);
         }

         switch (fsInfo->input_semantic_name[i]) {
         case TGSI_SEMANTIC_POSITION:
            interp = INTERP_POS;
            break;

         case TGSI_SEMANTIC_COLOR:
            if (fsInfo->input_interpolate[i] == TGSI_INTERPOLATE_COLOR) {
               if (softpipe->rasterizer->flatshade)
                  interp = INTERP_CONSTANT;
               else
                  interp = INTERP_PERSPECTIVE;
            }
            break;
         }

         /* this includes texcoords and varying vars */
         src = draw_find_shader_output(softpipe->draw,
                                       fsInfo->input_semantic_name[i],
                                       fsInfo->input_semantic_index[i]);
	 if (fsInfo->input_semantic_name[i] == TGSI_SEMANTIC_COLOR && src == 0)
	   /* try and find a bcolor */
	   src = draw_find_shader_output(softpipe->draw,
					 TGSI_SEMANTIC_BCOLOR, fsInfo->input_semantic_index[i]);

         draw_emit_vertex_attr(vinfo, EMIT_4F, interp, src);
      }

      softpipe->psize_slot = draw_find_shader_output(softpipe->draw,
                                                 TGSI_SEMANTIC_PSIZE, 0);
      if (softpipe->psize_slot > 0) {
         draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_CONSTANT,
                               softpipe->psize_slot);
      }

      draw_compute_vertex_size(vinfo);
   }

   return vinfo;
}


/**
 * Called from vbuf module.
 *
 * Note that there's actually two different vertex layouts in softpipe.
 *
 * The normal one is computed in softpipe_get_vertex_info() above and is
 * used by the point/line/tri "setup" code.
 *
 * The other one (this one) is only used by the vbuf module (which is
 * not normally used by default but used in testing).  For the vbuf module,
 * we basically want to pass-through the draw module's vertex layout as-is.
 * When the softpipe vbuf code begins drawing, the normal vertex layout
 * will come into play again.
 */
struct vertex_info *
softpipe_get_vbuf_vertex_info(struct softpipe_context *softpipe)
{
   (void) softpipe_get_vertex_info(softpipe);
   return &softpipe->vertex_info_vbuf;
}


/**
 * Recompute cliprect from scissor bounds, scissor enable and surface size.
 */
static void
compute_cliprect(struct softpipe_context *sp)
{
   /* SP_NEW_FRAMEBUFFER
    */
   uint surfWidth = sp->framebuffer.width;
   uint surfHeight = sp->framebuffer.height;

   /* SP_NEW_RASTERIZER
    */
   if (sp->rasterizer->scissor) {

      /* SP_NEW_SCISSOR
       *
       * clip to scissor rect:
       */
      sp->cliprect.minx = MAX2(sp->scissor.minx, 0);
      sp->cliprect.miny = MAX2(sp->scissor.miny, 0);
      sp->cliprect.maxx = MIN2(sp->scissor.maxx, surfWidth);
      sp->cliprect.maxy = MIN2(sp->scissor.maxy, surfHeight);
   }
   else {
      /* clip to surface bounds */
      sp->cliprect.minx = 0;
      sp->cliprect.miny = 0;
      sp->cliprect.maxx = surfWidth;
      sp->cliprect.maxy = surfHeight;
   }
}


static void
update_tgsi_samplers( struct softpipe_context *softpipe )
{
   unsigned i, sh;

   softpipe_reset_sampler_variants( softpipe );

   for (sh = 0; sh < Elements(softpipe->tex_cache); sh++) {
      for (i = 0; i < PIPE_MAX_SAMPLERS; i++) {
         struct softpipe_tex_tile_cache *tc = softpipe->tex_cache[sh][i];
         if (tc && tc->texture) {
            struct softpipe_resource *spt = softpipe_resource(tc->texture);
            if (spt->timestamp != tc->timestamp) {
               sp_tex_tile_cache_validate_texture( tc );
               /*
                 _debug_printf("INV %d %d\n", tc->timestamp, spt->timestamp);
               */
               tc->timestamp = spt->timestamp;
            }
         }
      }
   }
}


static void
update_fragment_shader(struct softpipe_context *softpipe, unsigned prim)
{
   struct sp_fragment_shader_variant_key key;

   memset(&key, 0, sizeof(key));

   if (prim == PIPE_PRIM_TRIANGLES)
      key.polygon_stipple = softpipe->rasterizer->poly_stipple_enable;

   if (softpipe->fs) {
      softpipe->fs_variant = softpipe_find_fs_variant(softpipe,
                                                      softpipe->fs, &key);
   }
   else {
      softpipe->fs_variant = NULL;
   }

   /* This would be the logical place to pass the fragment shader
    * to the draw module.  However, doing this here, during state
    * validation, causes problems with the 'draw' module helpers for
    * wide/AA/stippled lines.
    * In principle, the draw's fragment shader should be per-variant
    * but that doesn't work.  So we use a single draw fragment shader
    * per fragment shader, not per variant.
    */
#if 0
   if (softpipe->fs_variant) {
      draw_bind_fragment_shader(softpipe->draw,
                                softpipe->fs_variant->draw_shader);
   }
   else {
      draw_bind_fragment_shader(softpipe->draw, NULL);
   }
#endif
}


/**
 * This should be called when the polygon stipple pattern changes.
 * We create a new texture from the stipple pattern and create a new
 * sampler view.
 */
static void
update_polygon_stipple_pattern(struct softpipe_context *softpipe)
{
   struct pipe_resource *tex;
   struct pipe_sampler_view *view;

   tex = util_pstipple_create_stipple_texture(&softpipe->pipe,
                                              softpipe->poly_stipple.stipple);
   pipe_resource_reference(&softpipe->pstipple.texture, tex);
   pipe_resource_reference(&tex, NULL);

   view = util_pstipple_create_sampler_view(&softpipe->pipe,
                                            softpipe->pstipple.texture);
   pipe_sampler_view_reference(&softpipe->pstipple.sampler_view, view);
   pipe_sampler_view_reference(&view, NULL);
}


/**
 * Should be called when polygon stipple is enabled/disabled or when
 * the fragment shader changes.
 * We add/update the fragment sampler and sampler views to sample from
 * the polygon stipple texture.  The texture unit that we use depends on
 * the fragment shader (we need to use a unit not otherwise used by the
 * shader).
 */
static void
update_polygon_stipple_enable(struct softpipe_context *softpipe, unsigned prim)
{
   if (prim == PIPE_PRIM_TRIANGLES &&
       softpipe->fs_variant->key.polygon_stipple) {
      const unsigned unit = softpipe->fs_variant->stipple_sampler_unit;

      /* sampler state */
      softpipe->samplers[PIPE_SHADER_FRAGMENT][unit] = softpipe->pstipple.sampler;

      /* sampler view */
      pipe_sampler_view_reference(&softpipe->sampler_views[PIPE_SHADER_FRAGMENT][unit],
                                  softpipe->pstipple.sampler_view);

      sp_tex_tile_cache_set_sampler_view(softpipe->tex_cache[PIPE_SHADER_FRAGMENT][unit],
                                         softpipe->pstipple.sampler_view);

      softpipe->dirty |= SP_NEW_SAMPLER;
   }
}


/* Hopefully this will remain quite simple, otherwise need to pull in
 * something like the state tracker mechanism.
 */
void
softpipe_update_derived(struct softpipe_context *softpipe, unsigned prim)
{
   struct softpipe_screen *sp_screen = softpipe_screen(softpipe->pipe.screen);

   /* Check for updated textures.
    */
   if (softpipe->tex_timestamp != sp_screen->timestamp) {
      softpipe->tex_timestamp = sp_screen->timestamp;
      softpipe->dirty |= SP_NEW_TEXTURE;
   }

#if DO_PSTIPPLE_IN_HELPER_MODULE
   if (softpipe->dirty & SP_NEW_STIPPLE)
      /* before updating samplers! */
      update_polygon_stipple_pattern(softpipe);
#endif

   if (softpipe->dirty & (SP_NEW_RASTERIZER |
                          SP_NEW_FS))
      update_fragment_shader(softpipe, prim);

#if DO_PSTIPPLE_IN_HELPER_MODULE
   if (softpipe->dirty & (SP_NEW_RASTERIZER |
                          SP_NEW_STIPPLE |
                          SP_NEW_FS))
      update_polygon_stipple_enable(softpipe, prim);
#endif

   if (softpipe->dirty & (SP_NEW_SAMPLER |
                          SP_NEW_TEXTURE |
                          SP_NEW_FS | 
                          SP_NEW_VS))
      update_tgsi_samplers( softpipe );

   if (softpipe->dirty & (SP_NEW_RASTERIZER |
                          SP_NEW_FS |
                          SP_NEW_VS))
      invalidate_vertex_layout( softpipe );

   if (softpipe->dirty & (SP_NEW_SCISSOR |
                          SP_NEW_RASTERIZER |
                          SP_NEW_FRAMEBUFFER))
      compute_cliprect(softpipe);

   if (softpipe->dirty & (SP_NEW_BLEND |
                          SP_NEW_DEPTH_STENCIL_ALPHA |
                          SP_NEW_FRAMEBUFFER |
                          SP_NEW_FS))
      sp_build_quad_pipeline(softpipe);

   softpipe->dirty = 0;
}