path: root/src/gallium/drivers/ilo/ilo_gpe_gen6.c

/*
 * Mesa 3-D graphics library
 *
 * Copyright (C) 2012-2013 LunarG, Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *
 * Authors:
 *    Chia-I Wu <olv@lunarg.com>
 */

#include "util/u_dual_blend.h"
#include "util/u_half.h"
#include "brw_defines.h"
#include "intel_reg.h"

#include "ilo_context.h"
#include "ilo_cp.h"
#include "ilo_format.h"
#include "ilo_resource.h"
#include "ilo_shader.h"
#include "ilo_state.h"
#include "ilo_gpe_gen6.h"

/**
 * Translate winsys tiling to hardware tiling.
 */
int
ilo_gpe_gen6_translate_winsys_tiling(enum intel_tiling_mode tiling)
{
   switch (tiling) {
   case INTEL_TILING_NONE:
      return 0;
   case INTEL_TILING_X:
      return BRW_SURFACE_TILED;
   case INTEL_TILING_Y:
      return BRW_SURFACE_TILED | BRW_SURFACE_TILED_Y;
   default:
      assert(!"unknown tiling");
      return 0;
   }
}

/**
 * Translate a pipe primitive type to the matching hardware primitive type.
 */
int
ilo_gpe_gen6_translate_pipe_prim(unsigned prim)
{
   static const int prim_mapping[PIPE_PRIM_MAX] = {
      [PIPE_PRIM_POINTS]                     = _3DPRIM_POINTLIST,
      [PIPE_PRIM_LINES]                      = _3DPRIM_LINELIST,
      [PIPE_PRIM_LINE_LOOP]                  = _3DPRIM_LINELOOP,
      [PIPE_PRIM_LINE_STRIP]                 = _3DPRIM_LINESTRIP,
      [PIPE_PRIM_TRIANGLES]                  = _3DPRIM_TRILIST,
      [PIPE_PRIM_TRIANGLE_STRIP]             = _3DPRIM_TRISTRIP,
      [PIPE_PRIM_TRIANGLE_FAN]               = _3DPRIM_TRIFAN,
      [PIPE_PRIM_QUADS]                      = _3DPRIM_QUADLIST,
      [PIPE_PRIM_QUAD_STRIP]                 = _3DPRIM_QUADSTRIP,
      [PIPE_PRIM_POLYGON]                    = _3DPRIM_POLYGON,
      [PIPE_PRIM_LINES_ADJACENCY]            = _3DPRIM_LINELIST_ADJ,
      [PIPE_PRIM_LINE_STRIP_ADJACENCY]       = _3DPRIM_LINESTRIP_ADJ,
      [PIPE_PRIM_TRIANGLES_ADJACENCY]        = _3DPRIM_TRILIST_ADJ,
      [PIPE_PRIM_TRIANGLE_STRIP_ADJACENCY]   = _3DPRIM_TRISTRIP_ADJ,
   };

   assert(prim_mapping[prim]);

   return prim_mapping[prim];
}

/**
 * Translate a pipe texture target to the matching hardware surface type.
 */
int
ilo_gpe_gen6_translate_texture(enum pipe_texture_target target)
{
   switch (target) {
   case PIPE_BUFFER:
      return BRW_SURFACE_BUFFER;
   case PIPE_TEXTURE_1D:
   case PIPE_TEXTURE_1D_ARRAY:
      return BRW_SURFACE_1D;
   case PIPE_TEXTURE_2D:
   case PIPE_TEXTURE_RECT:
   case PIPE_TEXTURE_2D_ARRAY:
      return BRW_SURFACE_2D;
   case PIPE_TEXTURE_3D:
      return BRW_SURFACE_3D;
   case PIPE_TEXTURE_CUBE:
   case PIPE_TEXTURE_CUBE_ARRAY:
      return BRW_SURFACE_CUBE;
   default:
      assert(!"unknown texture target");
      return BRW_SURFACE_BUFFER;
   }
}

/**
 * Translate a depth/stencil pipe format to the matching hardware
 * format.  Return -1 on errors.
 */
static int
gen6_translate_depth_format(enum pipe_format format)
{
   switch (format) {
   case PIPE_FORMAT_Z16_UNORM:
      return BRW_DEPTHFORMAT_D16_UNORM;
   case PIPE_FORMAT_Z32_FLOAT:
      return BRW_DEPTHFORMAT_D32_FLOAT;
   case PIPE_FORMAT_Z24X8_UNORM:
      return BRW_DEPTHFORMAT_D24_UNORM_X8_UINT;
   case PIPE_FORMAT_Z24_UNORM_S8_UINT:
      return BRW_DEPTHFORMAT_D24_UNORM_S8_UINT;
   case PIPE_FORMAT_Z32_FLOAT_S8X24_UINT:
      return BRW_DEPTHFORMAT_D32_FLOAT_S8X24_UINT;
   default:
      return -1;
   }
}

/**
 * Translate a pipe logicop to the matching hardware logicop.
 */
static int
gen6_translate_pipe_logicop(unsigned logicop)
{
   switch (logicop) {
   case PIPE_LOGICOP_CLEAR:         return BRW_LOGICOPFUNCTION_CLEAR;
   case PIPE_LOGICOP_NOR:           return BRW_LOGICOPFUNCTION_NOR;
   case PIPE_LOGICOP_AND_INVERTED:  return BRW_LOGICOPFUNCTION_AND_INVERTED;
   case PIPE_LOGICOP_COPY_INVERTED: return BRW_LOGICOPFUNCTION_COPY_INVERTED;
   case PIPE_LOGICOP_AND_REVERSE:   return BRW_LOGICOPFUNCTION_AND_REVERSE;
   case PIPE_LOGICOP_INVERT:        return BRW_LOGICOPFUNCTION_INVERT;
   case PIPE_LOGICOP_XOR:           return BRW_LOGICOPFUNCTION_XOR;
   case PIPE_LOGICOP_NAND:          return BRW_LOGICOPFUNCTION_NAND;
   case PIPE_LOGICOP_AND:           return BRW_LOGICOPFUNCTION_AND;
   case PIPE_LOGICOP_EQUIV:         return BRW_LOGICOPFUNCTION_EQUIV;
   case PIPE_LOGICOP_NOOP:          return BRW_LOGICOPFUNCTION_NOOP;
   case PIPE_LOGICOP_OR_INVERTED:   return BRW_LOGICOPFUNCTION_OR_INVERTED;
   case PIPE_LOGICOP_COPY:          return BRW_LOGICOPFUNCTION_COPY;
   case PIPE_LOGICOP_OR_REVERSE:    return BRW_LOGICOPFUNCTION_OR_REVERSE;
   case PIPE_LOGICOP_OR:            return BRW_LOGICOPFUNCTION_OR;
   case PIPE_LOGICOP_SET:           return BRW_LOGICOPFUNCTION_SET;
   default:
      assert(!"unknown logicop function");
      return BRW_LOGICOPFUNCTION_CLEAR;
   }
}

/**
 * Translate a pipe blend function to the matching hardware blend function.
 */
static int
gen6_translate_pipe_blend(unsigned blend)
{
   switch (blend) {
   case PIPE_BLEND_ADD:                return BRW_BLENDFUNCTION_ADD;
   case PIPE_BLEND_SUBTRACT:           return BRW_BLENDFUNCTION_SUBTRACT;
   case PIPE_BLEND_REVERSE_SUBTRACT:   return BRW_BLENDFUNCTION_REVERSE_SUBTRACT;
   case PIPE_BLEND_MIN:                return BRW_BLENDFUNCTION_MIN;
   case PIPE_BLEND_MAX:                return BRW_BLENDFUNCTION_MAX;
   default:
      assert(!"unknown blend function");
      return BRW_BLENDFUNCTION_ADD;
   };
}

/**
 * Translate a pipe blend factor to the matching hardware blend factor.
 */
static int
gen6_translate_pipe_blendfactor(unsigned blendfactor)
{
   switch (blendfactor) {
   case PIPE_BLENDFACTOR_ONE:                return BRW_BLENDFACTOR_ONE;
   case PIPE_BLENDFACTOR_SRC_COLOR:          return BRW_BLENDFACTOR_SRC_COLOR;
   case PIPE_BLENDFACTOR_SRC_ALPHA:          return BRW_BLENDFACTOR_SRC_ALPHA;
   case PIPE_BLENDFACTOR_DST_ALPHA:          return BRW_BLENDFACTOR_DST_ALPHA;
   case PIPE_BLENDFACTOR_DST_COLOR:          return BRW_BLENDFACTOR_DST_COLOR;
   case PIPE_BLENDFACTOR_SRC_ALPHA_SATURATE: return BRW_BLENDFACTOR_SRC_ALPHA_SATURATE;
   case PIPE_BLENDFACTOR_CONST_COLOR:        return BRW_BLENDFACTOR_CONST_COLOR;
   case PIPE_BLENDFACTOR_CONST_ALPHA:        return BRW_BLENDFACTOR_CONST_ALPHA;
   case PIPE_BLENDFACTOR_SRC1_COLOR:         return BRW_BLENDFACTOR_SRC1_COLOR;
   case PIPE_BLENDFACTOR_SRC1_ALPHA:         return BRW_BLENDFACTOR_SRC1_ALPHA;
   case PIPE_BLENDFACTOR_ZERO:               return BRW_BLENDFACTOR_ZERO;
   case PIPE_BLENDFACTOR_INV_SRC_COLOR:      return BRW_BLENDFACTOR_INV_SRC_COLOR;
   case PIPE_BLENDFACTOR_INV_SRC_ALPHA:      return BRW_BLENDFACTOR_INV_SRC_ALPHA;
   case PIPE_BLENDFACTOR_INV_DST_ALPHA:      return BRW_BLENDFACTOR_INV_DST_ALPHA;
   case PIPE_BLENDFACTOR_INV_DST_COLOR:      return BRW_BLENDFACTOR_INV_DST_COLOR;
   case PIPE_BLENDFACTOR_INV_CONST_COLOR:    return BRW_BLENDFACTOR_INV_CONST_COLOR;
   case PIPE_BLENDFACTOR_INV_CONST_ALPHA:    return BRW_BLENDFACTOR_INV_CONST_ALPHA;
   case PIPE_BLENDFACTOR_INV_SRC1_COLOR:     return BRW_BLENDFACTOR_INV_SRC1_COLOR;
   case PIPE_BLENDFACTOR_INV_SRC1_ALPHA:     return BRW_BLENDFACTOR_INV_SRC1_ALPHA;
   default:
      assert(!"unknown blend factor");
      return BRW_BLENDFACTOR_ONE;
   };
}

/**
 * Translate a pipe stencil op to the matching hardware stencil op.
 */
static int
gen6_translate_pipe_stencil_op(unsigned stencil_op)
{
   switch (stencil_op) {
   case PIPE_STENCIL_OP_KEEP:       return BRW_STENCILOP_KEEP;
   case PIPE_STENCIL_OP_ZERO:       return BRW_STENCILOP_ZERO;
   case PIPE_STENCIL_OP_REPLACE:    return BRW_STENCILOP_REPLACE;
   case PIPE_STENCIL_OP_INCR:       return BRW_STENCILOP_INCRSAT;
   case PIPE_STENCIL_OP_DECR:       return BRW_STENCILOP_DECRSAT;
   case PIPE_STENCIL_OP_INCR_WRAP:  return BRW_STENCILOP_INCR;
   case PIPE_STENCIL_OP_DECR_WRAP:  return BRW_STENCILOP_DECR;
   case PIPE_STENCIL_OP_INVERT:     return BRW_STENCILOP_INVERT;
   default:
      assert(!"unknown stencil op");
      return BRW_STENCILOP_KEEP;
   }
}

/**
 * Translate a pipe texture mipfilter to the matching hardware mipfilter.
 */
static int
gen6_translate_tex_mipfilter(unsigned filter)
{
   switch (filter) {
   case PIPE_TEX_MIPFILTER_NEAREST: return BRW_MIPFILTER_NEAREST;
   case PIPE_TEX_MIPFILTER_LINEAR:  return BRW_MIPFILTER_LINEAR;
   case PIPE_TEX_MIPFILTER_NONE:    return BRW_MIPFILTER_NONE;
   default:
      assert(!"unknown mipfilter");
      return BRW_MIPFILTER_NONE;
   }
}

/**
 * Translate a pipe texture filter to the matching hardware mapfilter.
 */
static int
gen6_translate_tex_filter(unsigned filter)
{
   switch (filter) {
   case PIPE_TEX_FILTER_NEAREST: return BRW_MAPFILTER_NEAREST;
   case PIPE_TEX_FILTER_LINEAR:  return BRW_MAPFILTER_LINEAR;
   default:
      assert(!"unknown sampler filter");
      return BRW_MAPFILTER_NEAREST;
   }
}

/**
 * Translate a pipe texture coordinate wrapping mode to the matching hardware
 * wrapping mode.
 */
static int
gen6_translate_tex_wrap(unsigned wrap, bool clamp_to_edge)
{
   /* clamp to edge or border? */
   if (wrap == PIPE_TEX_WRAP_CLAMP) {
      wrap = (clamp_to_edge) ?
         PIPE_TEX_WRAP_CLAMP_TO_EDGE : PIPE_TEX_WRAP_CLAMP_TO_BORDER;
   }

   switch (wrap) {
   case PIPE_TEX_WRAP_REPEAT:             return BRW_TEXCOORDMODE_WRAP;
   case PIPE_TEX_WRAP_CLAMP_TO_EDGE:      return BRW_TEXCOORDMODE_CLAMP;
   case PIPE_TEX_WRAP_CLAMP_TO_BORDER:    return BRW_TEXCOORDMODE_CLAMP_BORDER;
   case PIPE_TEX_WRAP_MIRROR_REPEAT:      return BRW_TEXCOORDMODE_MIRROR;
   case PIPE_TEX_WRAP_CLAMP:
   case PIPE_TEX_WRAP_MIRROR_CLAMP:
   case PIPE_TEX_WRAP_MIRROR_CLAMP_TO_EDGE:
   case PIPE_TEX_WRAP_MIRROR_CLAMP_TO_BORDER:
   default:
      assert(!"unknown sampler wrap mode");
      return BRW_TEXCOORDMODE_WRAP;
   }
}

/**
 * Translate a pipe DSA test function to the matching hardware compare
 * function.
 */
static int
gen6_translate_dsa_func(unsigned func)
{
   switch (func) {
   case PIPE_FUNC_NEVER:      return BRW_COMPAREFUNCTION_NEVER;
   case PIPE_FUNC_LESS:       return BRW_COMPAREFUNCTION_LESS;
   case PIPE_FUNC_EQUAL:      return BRW_COMPAREFUNCTION_EQUAL;
   case PIPE_FUNC_LEQUAL:     return BRW_COMPAREFUNCTION_LEQUAL;
   case PIPE_FUNC_GREATER:    return BRW_COMPAREFUNCTION_GREATER;
   case PIPE_FUNC_NOTEQUAL:   return BRW_COMPAREFUNCTION_NOTEQUAL;
   case PIPE_FUNC_GEQUAL:     return BRW_COMPAREFUNCTION_GEQUAL;
   case PIPE_FUNC_ALWAYS:     return BRW_COMPAREFUNCTION_ALWAYS;
   default:
      assert(!"unknown depth/stencil/alpha test function");
      return BRW_COMPAREFUNCTION_NEVER;
   }
}

/**
 * Translate a pipe shadow compare function to the matching hardware shadow
 * function.
 */
static int
gen6_translate_shadow_func(unsigned func)
{
   /*
    * For PIPE_FUNC_x, the reference value is on the left-hand side of the
    * comparison, and 1.0 is returned when the comparison is true.
    *
    * For BRW_PREFILTER_x, the reference value is on the right-hand side of
    * the comparison, and 0.0 is returned when the comparison is true.
    */
   switch (func) {
   case PIPE_FUNC_NEVER:      return BRW_PREFILTER_ALWAYS;
   case PIPE_FUNC_LESS:       return BRW_PREFILTER_LEQUAL;
   case PIPE_FUNC_EQUAL:      return BRW_PREFILTER_NOTEQUAL;
   case PIPE_FUNC_LEQUAL:     return BRW_PREFILTER_LESS;
   case PIPE_FUNC_GREATER:    return BRW_PREFILTER_GEQUAL;
   case PIPE_FUNC_NOTEQUAL:   return BRW_PREFILTER_EQUAL;
   case PIPE_FUNC_GEQUAL:     return BRW_PREFILTER_GREATER;
   case PIPE_FUNC_ALWAYS:     return BRW_PREFILTER_NEVER;
   default:
      assert(!"unknown shadow compare function");
      return BRW_PREFILTER_NEVER;
   }
}

/**
 * Translate an index size to the matching hardware index format.
 */
static int
gen6_translate_index_size(int size)
{
   switch (size) {
   case 4: return BRW_INDEX_DWORD;
   case 2: return BRW_INDEX_WORD;
   case 1: return BRW_INDEX_BYTE;
   default:
      assert(!"unknown index size");
      return BRW_INDEX_BYTE;
   }
}

static void
gen6_emit_STATE_BASE_ADDRESS(const struct ilo_dev_info *dev,
                             struct intel_bo *general_state_bo,
                             struct intel_bo *surface_state_bo,
                             struct intel_bo *dynamic_state_bo,
                             struct intel_bo *indirect_object_bo,
                             struct intel_bo *instruction_bo,
                             uint32_t general_state_size,
                             uint32_t dynamic_state_size,
                             uint32_t indirect_object_size,
                             uint32_t instruction_size,
                             struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x0, 0x1, 0x01);
   const uint8_t cmd_len = 10;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   /* 4K-page aligned */
   assert(((general_state_size | dynamic_state_size |
            indirect_object_size | instruction_size) & 0xfff) == 0);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));

   ilo_cp_write_bo(cp, 1, general_state_bo,
                       INTEL_DOMAIN_RENDER,
                       0);
   ilo_cp_write_bo(cp, 1, surface_state_bo,
                       INTEL_DOMAIN_SAMPLER,
                       0);
   ilo_cp_write_bo(cp, 1, dynamic_state_bo,
                       INTEL_DOMAIN_RENDER | INTEL_DOMAIN_INSTRUCTION,
                       0);
   ilo_cp_write_bo(cp, 1, indirect_object_bo,
                       0,
                       0);
   ilo_cp_write_bo(cp, 1, instruction_bo,
                       INTEL_DOMAIN_INSTRUCTION,
                       0);

   if (general_state_size) {
      ilo_cp_write_bo(cp, general_state_size | 1, general_state_bo,
                          INTEL_DOMAIN_RENDER,
                          0);
   }
   else {
      /* skip range check */
      ilo_cp_write(cp, 1);
   }

   if (dynamic_state_size) {
      ilo_cp_write_bo(cp, dynamic_state_size | 1, dynamic_state_bo,
                          INTEL_DOMAIN_RENDER | INTEL_DOMAIN_INSTRUCTION,
                          0);
   }
   else {
      /* skip range check */
      ilo_cp_write(cp, 0xfffff000 + 1);
   }

   if (indirect_object_size) {
      ilo_cp_write_bo(cp, indirect_object_size | 1, indirect_object_bo,
                          0,
                          0);
   }
   else {
      /* skip range check */
      ilo_cp_write(cp, 0xfffff000 + 1);
   }

   if (instruction_size) {
      ilo_cp_write_bo(cp, instruction_size | 1, instruction_bo,
                          INTEL_DOMAIN_INSTRUCTION,
                          0);
   }
   else {
      /* skip range check */
      ilo_cp_write(cp, 1);
   }

   ilo_cp_end(cp);
}

static void
gen6_emit_STATE_SIP(const struct ilo_dev_info *dev,
                    uint32_t sip,
                    struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x0, 0x1, 0x02);
   const uint8_t cmd_len = 2;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   ilo_cp_begin(cp, cmd_len | (cmd_len - 2));
   ilo_cp_write(cp, cmd);
   ilo_cp_write(cp, sip);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_VF_STATISTICS(const struct ilo_dev_info *dev,
                                bool enable,
                                struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x1, 0x0, 0x0b);
   const uint8_t cmd_len = 1;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | enable);
   ilo_cp_end(cp);
}

static void
gen6_emit_PIPELINE_SELECT(const struct ilo_dev_info *dev,
                          int pipeline,
                          struct ilo_cp *cp)
{
   const int cmd = ILO_GPE_CMD(0x1, 0x1, 0x04);
   const uint8_t cmd_len = 1;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   /* 3D or media */
   assert(pipeline == 0x0 || pipeline == 0x1);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | pipeline);
   ilo_cp_end(cp);
}

static void
gen6_emit_MEDIA_VFE_STATE(const struct ilo_dev_info *dev,
                          int max_threads, int num_urb_entries,
                          int urb_entry_size,
                          struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x2, 0x0, 0x00);
   const uint8_t cmd_len = 8;
   uint32_t dw2, dw4;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   dw2 = (max_threads - 1) << 16 |
         num_urb_entries << 8 |
         1 << 7 | /* Reset Gateway Timer */
         1 << 6;  /* Bypass Gateway Control */

   dw4 = urb_entry_size << 16 |  /* URB Entry Allocation Size */
         480;                    /* CURBE Allocation Size */

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, 0); /* scratch */
   ilo_cp_write(cp, dw2);
   ilo_cp_write(cp, 0); /* MBZ */
   ilo_cp_write(cp, dw4);
   ilo_cp_write(cp, 0); /* scoreboard */
   ilo_cp_write(cp, 0);
   ilo_cp_write(cp, 0);
   ilo_cp_end(cp);
}

static void
gen6_emit_MEDIA_CURBE_LOAD(const struct ilo_dev_info *dev,
                          uint32_t buf, int size,
                          struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x2, 0x0, 0x01);
   const uint8_t cmd_len = 4;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   assert(buf % 32 == 0);
   /* gen6_emit_push_constant_buffer() allocates buffers in 256-bit units */
   size = align(size, 32);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, 0); /* MBZ */
   ilo_cp_write(cp, size);
   ilo_cp_write(cp, buf);
   ilo_cp_end(cp);
}

static void
gen6_emit_MEDIA_INTERFACE_DESCRIPTOR_LOAD(const struct ilo_dev_info *dev,
                                          uint32_t offset, int num_ids,
                                          struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x2, 0x0, 0x02);
   const uint8_t cmd_len = 4;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   assert(offset % 32 == 0);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, 0); /* MBZ */
   /* every ID has 8 DWords */
   ilo_cp_write(cp, num_ids * 8 * 4);
   ilo_cp_write(cp, offset);
   ilo_cp_end(cp);
}

static void
gen6_emit_MEDIA_GATEWAY_STATE(const struct ilo_dev_info *dev,
                              int id, int byte, int thread_count,
                              struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x2, 0x0, 0x03);
   const uint8_t cmd_len = 2;
   uint32_t dw1;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   dw1 = id << 16 |
         byte << 8 |
         thread_count;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, dw1);
   ilo_cp_end(cp);
}

static void
gen6_emit_MEDIA_STATE_FLUSH(const struct ilo_dev_info *dev,
                            int thread_count_water_mark,
                            int barrier_mask,
                            struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x2, 0x0, 0x04);
   const uint8_t cmd_len = 2;
   uint32_t dw1;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   dw1 = thread_count_water_mark << 16 |
         barrier_mask;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, dw1);
   ilo_cp_end(cp);
}

static void
gen6_emit_MEDIA_OBJECT_WALKER(const struct ilo_dev_info *dev,
                              struct ilo_cp *cp)
{
   assert(!"MEDIA_OBJECT_WALKER unsupported");
}

static void
gen6_emit_3DSTATE_BINDING_TABLE_POINTERS(const struct ilo_dev_info *dev,
                                         uint32_t vs_binding_table,
                                         uint32_t gs_binding_table,
                                         uint32_t ps_binding_table,
                                         struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x01);
   const uint8_t cmd_len = 4;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2) |
                    GEN6_BINDING_TABLE_MODIFY_VS |
                    GEN6_BINDING_TABLE_MODIFY_GS |
                    GEN6_BINDING_TABLE_MODIFY_PS);
   ilo_cp_write(cp, vs_binding_table);
   ilo_cp_write(cp, gs_binding_table);
   ilo_cp_write(cp, ps_binding_table);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_SAMPLER_STATE_POINTERS(const struct ilo_dev_info *dev,
                                         uint32_t vs_sampler_state,
                                         uint32_t gs_sampler_state,
                                         uint32_t ps_sampler_state,
                                         struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x02);
   const uint8_t cmd_len = 4;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2) |
                    VS_SAMPLER_STATE_CHANGE |
                    GS_SAMPLER_STATE_CHANGE |
                    PS_SAMPLER_STATE_CHANGE);
   ilo_cp_write(cp, vs_sampler_state);
   ilo_cp_write(cp, gs_sampler_state);
   ilo_cp_write(cp, ps_sampler_state);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_URB(const struct ilo_dev_info *dev,
                      int vs_total_size, int gs_total_size,
                      int vs_entry_size, int gs_entry_size,
                      struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x05);
   const uint8_t cmd_len = 3;
   const int row_size = 128; /* 1024 bits */
   int vs_alloc_size, gs_alloc_size;
   int vs_num_entries, gs_num_entries;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   /* in 1024-bit URB rows */
   vs_alloc_size = (vs_entry_size + row_size - 1) / row_size;
   gs_alloc_size = (gs_entry_size + row_size - 1) / row_size;

   /* the valid range is [1, 5] */
   if (!vs_alloc_size)
      vs_alloc_size = 1;
   if (!gs_alloc_size)
      gs_alloc_size = 1;
   assert(vs_alloc_size <= 5 && gs_alloc_size <= 5);

   /* the valid range is [24, 256] in multiples of 4 */
   vs_num_entries = (vs_total_size / row_size / vs_alloc_size) & ~3;
   if (vs_num_entries > 256)
      vs_num_entries = 256;
   assert(vs_num_entries >= 24);

   /* the valid range is [0, 256] in multiples of 4 */
   gs_num_entries = (gs_total_size / row_size / gs_alloc_size) & ~3;
   if (gs_num_entries > 256)
      gs_num_entries = 256;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, (vs_alloc_size - 1) << GEN6_URB_VS_SIZE_SHIFT |
                    vs_num_entries << GEN6_URB_VS_ENTRIES_SHIFT);
   ilo_cp_write(cp, gs_num_entries << GEN6_URB_GS_ENTRIES_SHIFT |
                    (gs_alloc_size - 1) << GEN6_URB_GS_SIZE_SHIFT);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_VERTEX_BUFFERS(const struct ilo_dev_info *dev,
                                 const struct pipe_vertex_buffer *vbuffers,
                                 const int *instance_divisors,
                                 uint32_t vbuffer_mask,
                                 struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x08);
   uint8_t cmd_len;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 82:
    *
    *     "From 1 to 33 VBs can be specified..."
    *
    * Because of the type of vbuffer_mask, this is always the case.
    */
   assert(vbuffer_mask <= (1UL << 33));

   if (!vbuffer_mask)
      return;

   cmd_len = 4 * util_bitcount(vbuffer_mask) + 1;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));

   while (vbuffer_mask) {
      const int index = u_bit_scan(&vbuffer_mask);
      const struct pipe_vertex_buffer *vb = &vbuffers[index];
      const int instance_divisor =
         (instance_divisors) ? instance_divisors[index] : 0;
      uint32_t dw;

      dw = index << GEN6_VB0_INDEX_SHIFT;

      if (instance_divisor)
         dw |= GEN6_VB0_ACCESS_INSTANCEDATA;
      else
         dw |= GEN6_VB0_ACCESS_VERTEXDATA;

      if (dev->gen >= ILO_GEN(7))
         dw |= GEN7_VB0_ADDRESS_MODIFYENABLE;

      /* use null vb if there is no buffer or the stride is out of range */
      if (vb->buffer && vb->stride <= 2048) {
         const struct ilo_resource *res = ilo_resource(vb->buffer);
         const uint32_t start_offset = vb->buffer_offset;
         const uint32_t end_offset = res->bo->get_size(res->bo) - 1;

         dw |= vb->stride << BRW_VB0_PITCH_SHIFT;

         ilo_cp_write(cp, dw);
         ilo_cp_write_bo(cp, start_offset, res->bo, INTEL_DOMAIN_VERTEX, 0);
         ilo_cp_write_bo(cp, end_offset, res->bo, INTEL_DOMAIN_VERTEX, 0);
         ilo_cp_write(cp, instance_divisor);
      }
      else {
         dw |= 1 << 13;

         ilo_cp_write(cp, dw);
         ilo_cp_write(cp, 0);
         ilo_cp_write(cp, 0);
         ilo_cp_write(cp, instance_divisor);
      }
   }

   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_VERTEX_ELEMENTS(const struct ilo_dev_info *dev,
                                  const struct pipe_vertex_element *velements,
                                  int num_velements,
                                  bool last_velement_edgeflag,
                                  bool prepend_generated_ids,
                                  struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x09);
   uint8_t cmd_len;
   int format, i;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 93:
    *
    *     "Up to 34 (DevSNB+) vertex elements are supported."
    */
   assert(num_velements + prepend_generated_ids <= 34);

   if (!num_velements && !prepend_generated_ids) {
      cmd_len = 3;
      format = BRW_SURFACEFORMAT_R32G32B32A32_FLOAT;

      ilo_cp_begin(cp, cmd_len);
      ilo_cp_write(cp, cmd | (cmd_len - 2));
      ilo_cp_write(cp,
            0 << GEN6_VE0_INDEX_SHIFT |
            GEN6_VE0_VALID |
            format << BRW_VE0_FORMAT_SHIFT |
            0 << BRW_VE0_SRC_OFFSET_SHIFT);
      ilo_cp_write(cp,
            BRW_VE1_COMPONENT_STORE_0 << BRW_VE1_COMPONENT_0_SHIFT |
            BRW_VE1_COMPONENT_STORE_0 << BRW_VE1_COMPONENT_1_SHIFT |
            BRW_VE1_COMPONENT_STORE_0 << BRW_VE1_COMPONENT_2_SHIFT |
            BRW_VE1_COMPONENT_STORE_1_FLT << BRW_VE1_COMPONENT_3_SHIFT);
      ilo_cp_end(cp);

      return;
   }

   cmd_len = 2 * (num_velements + prepend_generated_ids) + 1;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));

   if (prepend_generated_ids) {
      ilo_cp_write(cp, GEN6_VE0_VALID);
      ilo_cp_write(cp,
            BRW_VE1_COMPONENT_STORE_VID << BRW_VE1_COMPONENT_0_SHIFT |
            BRW_VE1_COMPONENT_STORE_IID << BRW_VE1_COMPONENT_1_SHIFT |
            BRW_VE1_COMPONENT_NOSTORE << BRW_VE1_COMPONENT_2_SHIFT |
            BRW_VE1_COMPONENT_NOSTORE << BRW_VE1_COMPONENT_3_SHIFT);
   }

   for (i = 0; i < num_velements; i++) {
      const struct pipe_vertex_element *ve = &velements[i];
      int comp[4] = {
         BRW_VE1_COMPONENT_STORE_SRC,
         BRW_VE1_COMPONENT_STORE_SRC,
         BRW_VE1_COMPONENT_STORE_SRC,
         BRW_VE1_COMPONENT_STORE_SRC,
      };
      int edgeflag_enable;

      if (last_velement_edgeflag && i == num_velements - 1) {
         /*
          * From the Sandy Bridge PRM, volume 2 part 1, page 94:
          *
          *     "* This bit (Edge Flag Enable) must only be ENABLED on the
          *        last valid VERTEX_ELEMENT structure.
          *
          *      * When set, Component 0 Control must be set to
          *        VFCOMP_STORE_SRC, and Component 1-3 Control must be set to
          *        VFCOMP_NOSTORE.
          *
          *      * The Source Element Format must be set to the UINT format.
          *
          *      * [DevSNB]: Edge Flags are not supported for QUADLIST
          *        primitives.  Software may elect to convert QUADLIST
          *        primitives to some set of corresponding edge-flag-supported
          *        primitive types (e.g., POLYGONs) prior to submission to the
          *        3D pipeline."
          *
          * Only a limitied set of primitive types could have Edge Flag Enable
          * set.  The caller should not set last_velement_edgeflag for such
          * primitive types.
          */
         comp[1] = BRW_VE1_COMPONENT_NOSTORE;
         comp[2] = BRW_VE1_COMPONENT_NOSTORE;
         comp[3] = BRW_VE1_COMPONENT_NOSTORE;

         switch (ve->src_format) {
         case PIPE_FORMAT_R32_FLOAT:
            format = ilo_translate_vertex_format(PIPE_FORMAT_R32_UINT);
            break;
         default:
            assert(ve->src_format == PIPE_FORMAT_R8_UINT);
            format = ilo_translate_vertex_format(ve->src_format);
            break;
         }

         edgeflag_enable = GEN6_VE0_EDGE_FLAG_ENABLE;
      }
      else {
         switch (util_format_get_nr_components(ve->src_format)) {
         case 1: comp[1] = BRW_VE1_COMPONENT_STORE_0;
         case 2: comp[2] = BRW_VE1_COMPONENT_STORE_0;
         case 3: comp[3] = (util_format_is_pure_integer(ve->src_format)) ?
                           BRW_VE1_COMPONENT_STORE_1_INT :
                           BRW_VE1_COMPONENT_STORE_1_FLT;
         }

         format = ilo_translate_vertex_format(ve->src_format);

         edgeflag_enable = 0;
      }

      ilo_cp_write(cp,
            ve->vertex_buffer_index << GEN6_VE0_INDEX_SHIFT |
            GEN6_VE0_VALID |
            format << BRW_VE0_FORMAT_SHIFT |
            edgeflag_enable |
            ve->src_offset << BRW_VE0_SRC_OFFSET_SHIFT);

      ilo_cp_write(cp,
            comp[0] << BRW_VE1_COMPONENT_0_SHIFT |
            comp[1] << BRW_VE1_COMPONENT_1_SHIFT |
            comp[2] << BRW_VE1_COMPONENT_2_SHIFT |
            comp[3] << BRW_VE1_COMPONENT_3_SHIFT);
   }

   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_INDEX_BUFFER(const struct ilo_dev_info *dev,
                               const struct pipe_index_buffer *ib,
                               bool enable_cut_index,
                               struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x0a);
   const uint8_t cmd_len = 3;
   const struct ilo_resource *res = ilo_resource(ib->buffer);
   uint32_t start_offset, end_offset;
   int format;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   if (!res)
      return;

   format = gen6_translate_index_size(ib->index_size);

   start_offset = ib->offset;
   /* start_offset must be aligned to index size */
   if (start_offset % ib->index_size) {
      /* TODO need a u_upload_mgr to upload the IB to an aligned address */
      assert(!"unaligned index buffer offset");
      start_offset -= start_offset % ib->index_size;
   }

   /* end_offset must also be aligned */
   end_offset = res->bo->get_size(res->bo);
   end_offset -= (end_offset % ib->index_size);
   /* it is inclusive */
   end_offset -= 1;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2) |
                    ((enable_cut_index) ? BRW_CUT_INDEX_ENABLE : 0) |
                    format << 8);
   ilo_cp_write_bo(cp, start_offset, res->bo, INTEL_DOMAIN_VERTEX, 0);
   ilo_cp_write_bo(cp, end_offset, res->bo, INTEL_DOMAIN_VERTEX, 0);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_VIEWPORT_STATE_POINTERS(const struct ilo_dev_info *dev,
                                          uint32_t clip_viewport,
                                          uint32_t sf_viewport,
                                          uint32_t cc_viewport,
                                          struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x0d);
   const uint8_t cmd_len = 4;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2) |
                    GEN6_CLIP_VIEWPORT_MODIFY |
                    GEN6_SF_VIEWPORT_MODIFY |
                    GEN6_CC_VIEWPORT_MODIFY);
   ilo_cp_write(cp, clip_viewport);
   ilo_cp_write(cp, sf_viewport);
   ilo_cp_write(cp, cc_viewport);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_CC_STATE_POINTERS(const struct ilo_dev_info *dev,
                                    uint32_t blend_state,
                                    uint32_t depth_stencil_state,
                                    uint32_t color_calc_state,
                                    struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x0e);
   const uint8_t cmd_len = 4;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, blend_state | 1);
   ilo_cp_write(cp, depth_stencil_state | 1);
   ilo_cp_write(cp, color_calc_state | 1);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_SCISSOR_STATE_POINTERS(const struct ilo_dev_info *dev,
                                         uint32_t scissor_rect,
                                         struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x0f);
   const uint8_t cmd_len = 2;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, scissor_rect);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_VS(const struct ilo_dev_info *dev,
                     const struct ilo_shader *vs,
                     int num_samplers,
                     struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x10);
   const uint8_t cmd_len = 6;
   uint32_t dw2, dw4, dw5;
   int vue_read_len, max_threads;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   if (!vs) {
      ilo_cp_begin(cp, cmd_len);
      ilo_cp_write(cp, cmd | (cmd_len - 2));
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_end(cp);
      return;
   }

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 135:
    *
    *     "(Vertex URB Entry Read Length) Specifies the number of pairs of
    *      128-bit vertex elements to be passed into the payload for each
    *      vertex."
    *
    *     "It is UNDEFINED to set this field to 0 indicating no Vertex URB
    *      data to be read and passed to the thread."
    */
   vue_read_len = (vs->in.count + 1) / 2;
   if (!vue_read_len)
      vue_read_len = 1;

   switch (dev->gen) {
   case ILO_GEN(6):
      /*
       * From the Sandy Bridge PRM, volume 1 part 1, page 22:
       *
       *     "Device             # of EUs        #Threads/EU
       *      SNB GT2            12              5
       *      SNB GT1            6               4"
       */
      max_threads = (dev->gt == 2) ? 60 : 24;
      break;
   case ILO_GEN(7):
      /*
       * From the Ivy Bridge PRM, volume 1 part 1, page 18:
       *
       *     "Device             # of EUs        #Threads/EU
       *      Ivy Bridge (GT2)   16              8
       *      Ivy Bridge (GT1)   6               6"
       */
      max_threads = (dev->gt == 2) ? 128 : 36;
      break;
   case ILO_GEN(7.5):
      /* see brwCreateContext() */
      max_threads = (dev->gt == 2) ? 280 : 70;
      break;
   default:
      max_threads = 1;
      break;
   }

   dw2 = ((num_samplers + 3) / 4) << GEN6_VS_SAMPLER_COUNT_SHIFT;
   if (false)
      dw2 |= GEN6_VS_FLOATING_POINT_MODE_ALT;

   dw4 = vs->in.start_grf << GEN6_VS_DISPATCH_START_GRF_SHIFT |
         vue_read_len << GEN6_VS_URB_READ_LENGTH_SHIFT |
         0 << GEN6_VS_URB_ENTRY_READ_OFFSET_SHIFT;

   dw5 = GEN6_VS_STATISTICS_ENABLE |
         GEN6_VS_ENABLE;

   if (dev->gen >= ILO_GEN(7.5))
      dw5 |= (max_threads - 1) << HSW_VS_MAX_THREADS_SHIFT;
   else
      dw5 |= (max_threads - 1) << GEN6_VS_MAX_THREADS_SHIFT;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, vs->cache_offset);
   ilo_cp_write(cp, dw2);
   ilo_cp_write(cp, 0); /* scratch */
   ilo_cp_write(cp, dw4);
   ilo_cp_write(cp, dw5);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_GS(const struct ilo_dev_info *dev,
                     const struct ilo_shader *gs,
                     const struct ilo_shader *vs,
                     uint32_t vs_offset,
                     struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x11);
   const uint8_t cmd_len = 7;
   uint32_t dw1, dw2, dw4, dw5, dw6;
   int i;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   if (!gs && (!vs || !vs->stream_output)) {
      dw1 = 0;
      dw2 = 0;
      dw4 = 1 << GEN6_GS_URB_READ_LENGTH_SHIFT;
      dw5 = GEN6_GS_STATISTICS_ENABLE;
      dw6 = 0;
   }
   else {
      int max_threads, vue_read_len;

      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 154:
       *
       *     "Maximum Number of Threads valid range is [0,27] when Rendering
       *      Enabled bit is set."
       *
       * From the Sandy Bridge PRM, volume 2 part 1, page 173:
       *
       *     "Programming Note: If the GS stage is enabled, software must
       *      always allocate at least one GS URB Entry. This is true even if
       *      the GS thread never needs to output vertices to the pipeline,
       *      e.g., when only performing stream output. This is an artifact of
       *      the need to pass the GS thread an initial destination URB
       *      handle."
       *
       * As such, we always enable rendering, and limit the number of threads.
       */
      if (dev->gt == 2) {
         /* maximum is 60, but limited to 28 */
         max_threads = 28;
      }
      else {
         /* maximum is 24, but limited to 21 (see brwCreateContext()) */
         max_threads = 21;
      }

      if (max_threads > 28)
         max_threads = 28;

      dw2 = GEN6_GS_SPF_MODE;

      dw5 = (max_threads - 1) << GEN6_GS_MAX_THREADS_SHIFT |
            GEN6_GS_STATISTICS_ENABLE |
            GEN6_GS_SO_STATISTICS_ENABLE |
            GEN6_GS_RENDERING_ENABLE;

      /*
       * we cannot make use of GEN6_GS_REORDER because it will reorder
       * triangle strips according to D3D rules (triangle 2N+1 uses vertices
       * (2N+1, 2N+3, 2N+2)), instead of GL rules (triangle 2N+1 uses vertices
       * (2N+2, 2N+1, 2N+3)).
       */
      dw6 = GEN6_GS_ENABLE;

      if (gs) {
         /* VS ouputs must match GS inputs */
         assert(gs->in.count == vs->out.count);
         for (i = 0; i < gs->in.count; i++) {
            assert(gs->in.semantic_names[i] == vs->out.semantic_names[i]);
            assert(gs->in.semantic_indices[i] == vs->out.semantic_indices[i]);
         }

         /*
          * From the Sandy Bridge PRM, volume 2 part 1, page 153:
          *
          *     "It is UNDEFINED to set this field (Vertex URB Entry Read
          *      Length) to 0 indicating no Vertex URB data to be read and
          *      passed to the thread."
          */
         vue_read_len = (gs->in.count + 1) / 2;
         if (!vue_read_len)
            vue_read_len = 1;

         dw1 = gs->cache_offset;
         dw4 = vue_read_len << GEN6_GS_URB_READ_LENGTH_SHIFT |
               0 << GEN6_GS_URB_ENTRY_READ_OFFSET_SHIFT |
               gs->in.start_grf << GEN6_GS_DISPATCH_START_GRF_SHIFT;

         if (gs->in.discard_adj)
            dw6 |= GEN6_GS_DISCARD_ADJACENCY;

         if (gs->stream_output) {
            dw6 |= GEN6_GS_SVBI_PAYLOAD_ENABLE;
            if (gs->svbi_post_inc) {
               dw6 |= GEN6_GS_SVBI_POSTINCREMENT_ENABLE |
                      gs->svbi_post_inc << GEN6_GS_SVBI_POSTINCREMENT_VALUE_SHIFT;
            }
         }
      }
      else {
         /*
          * From the Sandy Bridge PRM, volume 2 part 1, page 153:
          *
          *     "It is UNDEFINED to set this field (Vertex URB Entry Read
          *      Length) to 0 indicating no Vertex URB data to be read and
          *      passed to the thread."
          */
         vue_read_len = (vs->out.count + 1) / 2;
         if (!vue_read_len)
            vue_read_len = 1;

         dw1 = vs_offset;
         dw4 = vue_read_len << GEN6_GS_URB_READ_LENGTH_SHIFT |
               0 << GEN6_GS_URB_ENTRY_READ_OFFSET_SHIFT |
               vs->gs_start_grf << GEN6_GS_DISPATCH_START_GRF_SHIFT;

         if (vs->in.discard_adj)
            dw6 |= GEN6_GS_DISCARD_ADJACENCY;

         dw6 |= GEN6_GS_SVBI_PAYLOAD_ENABLE;
         if (vs->svbi_post_inc) {
            dw6 |= GEN6_GS_SVBI_POSTINCREMENT_ENABLE |
                   vs->svbi_post_inc << GEN6_GS_SVBI_POSTINCREMENT_VALUE_SHIFT;
         }
      }
   }

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, dw1);
   ilo_cp_write(cp, dw2);
   ilo_cp_write(cp, 0);
   ilo_cp_write(cp, dw4);
   ilo_cp_write(cp, dw5);
   ilo_cp_write(cp, dw6);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_CLIP(const struct ilo_dev_info *dev,
                       const struct pipe_rasterizer_state *rasterizer,
                       bool has_linear_interp,
                       bool enable_guardband,
                       int num_viewports,
                       struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x12);
   const uint8_t cmd_len = 4;
   uint32_t dw1, dw2, dw3;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   if (!rasterizer) {
      ilo_cp_begin(cp, cmd_len);
      ilo_cp_write(cp, cmd | (cmd_len - 2));
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_end(cp);

      return;
   }

   dw1 = GEN6_CLIP_STATISTICS_ENABLE;

   if (dev->gen >= ILO_GEN(7)) {
      /*
       * From the Ivy Bridge PRM, volume 2 part 1, page 219:
       *
       *     "Workaround : Due to Hardware issue "EarlyCull" needs to be
       *      enabled only for the cases where the incoming primitive topology
       *      into the clipper guaranteed to be Trilist."
       *
       * What does this mean?
       */
      dw1 |= 0 << 19 |
             GEN7_CLIP_EARLY_CULL;

      if (rasterizer->front_ccw)
         dw1 |= GEN7_CLIP_WINDING_CCW;

      switch (rasterizer->cull_face) {
      case PIPE_FACE_NONE:
         dw1 |= GEN7_CLIP_CULLMODE_NONE;
         break;
      case PIPE_FACE_FRONT:
         dw1 |= GEN7_CLIP_CULLMODE_FRONT;
         break;
      case PIPE_FACE_BACK:
         dw1 |= GEN7_CLIP_CULLMODE_BACK;
         break;
      case PIPE_FACE_FRONT_AND_BACK:
         dw1 |= GEN7_CLIP_CULLMODE_BOTH;
         break;
      }
   }

   dw2 = GEN6_CLIP_ENABLE |
         GEN6_CLIP_XY_TEST |
         rasterizer->clip_plane_enable << GEN6_USER_CLIP_CLIP_DISTANCES_SHIFT |
         GEN6_CLIP_MODE_NORMAL;

   if (rasterizer->clip_halfz)
      dw2 |= GEN6_CLIP_API_D3D;
   else
      dw2 |= GEN6_CLIP_API_OGL;

   if (rasterizer->depth_clip)
      dw2 |= GEN6_CLIP_Z_TEST;

   /*
    * There are several reasons that guard band test should be disabled
    *
    *  - when the renderer does not perform 2D clipping
    *  - GL wide points (to avoid partially visibie object)
    *  - GL wide or AA lines (to avoid partially visibie object)
    */
   if (enable_guardband && true /* API_GL */) {
      if (rasterizer->point_size_per_vertex || rasterizer->point_size > 1.0f)
         enable_guardband = false;
      if (rasterizer->line_smooth || rasterizer->line_width > 1.0f)
         enable_guardband = false;
   }

   if (enable_guardband)
      dw2 |= GEN6_CLIP_GB_TEST;

   if (has_linear_interp)
      dw2 |= GEN6_CLIP_NON_PERSPECTIVE_BARYCENTRIC_ENABLE;

   if (rasterizer->flatshade_first) {
      dw2 |= 0 << GEN6_CLIP_TRI_PROVOKE_SHIFT |
             0 << GEN6_CLIP_LINE_PROVOKE_SHIFT |
             1 << GEN6_CLIP_TRIFAN_PROVOKE_SHIFT;
   }
   else {
      dw2 |= 2 << GEN6_CLIP_TRI_PROVOKE_SHIFT |
             1 << GEN6_CLIP_LINE_PROVOKE_SHIFT |
             2 << GEN6_CLIP_TRIFAN_PROVOKE_SHIFT;
   }

   dw3 = 0x1 << GEN6_CLIP_MIN_POINT_WIDTH_SHIFT |
         0x7ff << GEN6_CLIP_MAX_POINT_WIDTH_SHIFT |
         GEN6_CLIP_FORCE_ZERO_RTAINDEX |
         (num_viewports - 1);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, dw1);
   ilo_cp_write(cp, dw2);
   ilo_cp_write(cp, dw3);
   ilo_cp_end(cp);
}

/**
 * Fill in DW2 to DW7 of 3DSTATE_SF.
 */
void
ilo_gpe_gen6_fill_3dstate_sf_raster(const struct ilo_dev_info *dev,
                                    const struct pipe_rasterizer_state *rasterizer,
                                    int num_samples,
                                    enum pipe_format depth_format,
                                    bool separate_stencil,
                                    uint32_t *dw, int num_dwords)
{
   float offset_const, offset_scale, offset_clamp;
   int format, line_width, point_width;

   ILO_GPE_VALID_GEN(dev, 6, 7);
   assert(num_dwords == 6);

   if (!rasterizer) {
      dw[0] = 0;
      dw[1] = (num_samples > 1) ? GEN6_SF_MSRAST_ON_PATTERN : 0;
      dw[2] = 0;
      dw[3] = 0;
      dw[4] = 0;
      dw[5] = 0;

      return;
   }

   /*
    * Scale the constant term.  The minimum representable value used by the HW
    * is not large enouch to be the minimum resolvable difference.
    */
   offset_const = rasterizer->offset_units * 2.0f;

   offset_scale = rasterizer->offset_scale;
   offset_clamp = rasterizer->offset_clamp;

   if (separate_stencil) {
      switch (depth_format) {
      case PIPE_FORMAT_Z24_UNORM_S8_UINT:
         depth_format = PIPE_FORMAT_Z24X8_UNORM;
         break;
      case PIPE_FORMAT_Z32_FLOAT_S8X24_UINT:
         depth_format = PIPE_FORMAT_Z32_FLOAT;;
         break;
      case PIPE_FORMAT_S8_UINT:
         depth_format = PIPE_FORMAT_NONE;
         break;
      default:
         break;
      }
   }

   format = gen6_translate_depth_format(depth_format);
   /* FLOAT surface is assumed when there is no depth buffer */
   if (format < 0)
      format = BRW_DEPTHFORMAT_D32_FLOAT;

   /*
    * Smooth lines should intersect ceil(line_width) or (ceil(line_width) + 1)
    * pixels in the minor direction.  We have to make the lines slightly
    * thicker, 0.5 pixel on both sides, so that they intersect that many
    * pixels are considered into the lines.
    *
    * Line width is in U3.7.
    */
   line_width = (int) ((rasterizer->line_width +
            (float) rasterizer->line_smooth) * 128.0f + 0.5f);
   line_width = CLAMP(line_width, 0, 1023);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 251:
    *
    *     "Software must not program a value of 0.0 when running in
    *      MSRASTMODE_ON_xxx modes - zero-width lines are not available when
    *      multisampling rasterization is enabled."
    */
   if (rasterizer->multisample) {
      if (!line_width)
         line_width = 128; /* 1.0f */
   }
   else if (line_width == 128 && !rasterizer->line_smooth) {
      /* use GIQ rules */
      line_width = 0;
   }

   /* in U8.3 */
   point_width = (int) (rasterizer->point_size * 8.0f + 0.5f);
   point_width = CLAMP(point_width, 1, 2047);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 248:
    *
    *     "This bit (Statistics Enable) should be set whenever clipping is
    *      enabled and the Statistics Enable bit is set in CLIP_STATE. It
    *      should be cleared if clipping is disabled or Statistics Enable in
    *      CLIP_STATE is clear."
    */
   dw[0] = GEN6_SF_STATISTICS_ENABLE |
           GEN6_SF_VIEWPORT_TRANSFORM_ENABLE;

   /* XXX GEN6 path seems to work fine for GEN7 */
   if (false && dev->gen >= ILO_GEN(7)) {
      dw[0] |= format << GEN7_SF_DEPTH_BUFFER_SURFACE_FORMAT_SHIFT;

      /*
       * From the Ivy Bridge PRM, volume 2 part 1, page 258:
       *
       *     "This bit (Legacy Global Depth Bias Enable, Global Depth Offset
       *      Enable Solid , Global Depth Offset Enable Wireframe, and Global
       *      Depth Offset Enable Point) should be set whenever non zero depth
       *      bias (Slope, Bias) values are used. Setting this bit may have
       *      some degradation of performance for some workloads."
       */
      if (rasterizer->offset_tri ||
          rasterizer->offset_line ||
          rasterizer->offset_point) {
         /* XXX need to scale offset_const according to the depth format */
         dw[0] |= GEN6_SF_LEGACY_GLOBAL_DEPTH_BIAS;

         dw[0] |= GEN6_SF_GLOBAL_DEPTH_OFFSET_SOLID |
                  GEN6_SF_GLOBAL_DEPTH_OFFSET_WIREFRAME |
                  GEN6_SF_GLOBAL_DEPTH_OFFSET_POINT;
      }
      else {
         offset_const = 0.0f;
         offset_scale = 0.0f;
         offset_clamp = 0.0f;
      }
   }
   else {
      if (dev->gen >= ILO_GEN(7))
         dw[0] |= format << GEN7_SF_DEPTH_BUFFER_SURFACE_FORMAT_SHIFT;

      if (rasterizer->offset_tri)
         dw[0] |= GEN6_SF_GLOBAL_DEPTH_OFFSET_SOLID;
      if (rasterizer->offset_line)
         dw[0] |= GEN6_SF_GLOBAL_DEPTH_OFFSET_WIREFRAME;
      if (rasterizer->offset_point)
         dw[0] |= GEN6_SF_GLOBAL_DEPTH_OFFSET_POINT;
   }

   switch (rasterizer->fill_front) {
   case PIPE_POLYGON_MODE_FILL:
      dw[0] |= GEN6_SF_FRONT_SOLID;
      break;
   case PIPE_POLYGON_MODE_LINE:
      dw[0] |= GEN6_SF_FRONT_WIREFRAME;
      break;
   case PIPE_POLYGON_MODE_POINT:
      dw[0] |= GEN6_SF_FRONT_POINT;
      break;
   }

   switch (rasterizer->fill_back) {
   case PIPE_POLYGON_MODE_FILL:
      dw[0] |= GEN6_SF_BACK_SOLID;
      break;
   case PIPE_POLYGON_MODE_LINE:
      dw[0] |= GEN6_SF_BACK_WIREFRAME;
      break;
   case PIPE_POLYGON_MODE_POINT:
      dw[0] |= GEN6_SF_BACK_POINT;
      break;
   }

   if (rasterizer->front_ccw)
      dw[0] |= GEN6_SF_WINDING_CCW;

   dw[1] = 0;

   if (rasterizer->line_smooth) {
      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 251:
       *
       *     "This field (Anti-aliasing Enable) must be disabled if any of the
       *      render targets have integer (UINT or SINT) surface format."
       *
       * From the Sandy Bridge PRM, volume 2 part 1, page 317:
       *
       *     "This field (Hierarchical Depth Buffer Enable) must be disabled
       *      if Anti-aliasing Enable in 3DSTATE_SF is enabled.
       *
       * TODO We do not check those yet.
       */
      dw[1] |= GEN6_SF_LINE_AA_ENABLE |
               GEN6_SF_LINE_END_CAP_WIDTH_1_0;
   }

   switch (rasterizer->cull_face) {
   case PIPE_FACE_NONE:
      dw[1] |= GEN6_SF_CULL_NONE;
      break;
   case PIPE_FACE_FRONT:
      dw[1] |= GEN6_SF_CULL_FRONT;
      break;
   case PIPE_FACE_BACK:
      dw[1] |= GEN6_SF_CULL_BACK;
      break;
   case PIPE_FACE_FRONT_AND_BACK:
      dw[1] |= GEN6_SF_CULL_BOTH;
      break;
   }

   dw[1] |= line_width << GEN6_SF_LINE_WIDTH_SHIFT;

   if (rasterizer->scissor)
      dw[1] |= GEN6_SF_SCISSOR_ENABLE;

   if (num_samples > 1 && rasterizer->multisample)
      dw[1] |= GEN6_SF_MSRAST_ON_PATTERN;

   dw[2] = GEN6_SF_LINE_AA_MODE_TRUE |
           GEN6_SF_VERTEX_SUBPIXEL_8BITS;

   if (rasterizer->line_last_pixel)
      dw[2] |= 1 << 31;

   if (rasterizer->flatshade_first) {
      dw[2] |= 0 << GEN6_SF_TRI_PROVOKE_SHIFT |
               0 << GEN6_SF_LINE_PROVOKE_SHIFT |
               1 << GEN6_SF_TRIFAN_PROVOKE_SHIFT;
   }
   else {
      dw[2] |= 2 << GEN6_SF_TRI_PROVOKE_SHIFT |
               1 << GEN6_SF_LINE_PROVOKE_SHIFT |
               2 << GEN6_SF_TRIFAN_PROVOKE_SHIFT;
   }

   if (!rasterizer->point_size_per_vertex)
      dw[2] |= GEN6_SF_USE_STATE_POINT_WIDTH;

   dw[2] |= point_width;

   dw[3] = fui(offset_const);
   dw[4] = fui(offset_scale);
   dw[5] = fui(offset_clamp);
}

/**
 * Fill in DW1 and DW8 to DW19 of 3DSTATE_SF.
 */
void
ilo_gpe_gen6_fill_3dstate_sf_sbe(const struct ilo_dev_info *dev,
                                 const struct pipe_rasterizer_state *rasterizer,
                                 const struct ilo_shader *fs,
                                 const struct ilo_shader *last_sh,
                                 uint32_t *dw, int num_dwords)
{
   uint32_t point_sprite_enable, const_interp_enable;
   uint16_t attr_ctrl[PIPE_MAX_SHADER_INPUTS];
   int vue_offset, vue_len;
   int dst, max_src, i;

   ILO_GPE_VALID_GEN(dev, 6, 7);
   assert(num_dwords == 13);

   if (!fs) {
      if (dev->gen >= ILO_GEN(7))
         dw[0] = 1 << GEN7_SBE_URB_ENTRY_READ_LENGTH_SHIFT;
      else
         dw[0] = 1 << GEN6_SF_URB_ENTRY_READ_LENGTH_SHIFT;

      for (i = 1; i < num_dwords; i++)
         dw[i] = 0;

      return;
   }

   if (last_sh) {
      /* skip PSIZE and POSITION (how about the optional CLIPDISTs?) */
      assert(last_sh->out.semantic_names[0] == TGSI_SEMANTIC_PSIZE);
      assert(last_sh->out.semantic_names[1] == TGSI_SEMANTIC_POSITION);
      vue_offset = 2;
      vue_len = last_sh->out.count - vue_offset;
   }
   else {
      vue_offset = 0;
      vue_len = fs->in.count;
   }

   point_sprite_enable = 0;
   const_interp_enable = 0;
   max_src = (last_sh) ? 0 : fs->in.count - 1;

   for (dst = 0; dst < fs->in.count; dst++) {
      const int semantic = fs->in.semantic_names[dst];
      const int index = fs->in.semantic_indices[dst];
      const int interp = fs->in.interp[dst];
      int src;
      uint16_t ctrl;

      /*
       * From the Ivy Bridge PRM, volume 2 part 1, page 268:
       *
       *     "This field (Point Sprite Texture Coordinate Enable) must be
       *      programmed to 0 when non-point primitives are rendered."
       *
       * TODO We do not check that yet.
       */
      if (semantic == TGSI_SEMANTIC_GENERIC &&
          (rasterizer->sprite_coord_enable & (1 << index)))
         point_sprite_enable |= 1 << dst;

      if (interp == TGSI_INTERPOLATE_CONSTANT ||
          (interp == TGSI_INTERPOLATE_COLOR && rasterizer->flatshade))
         const_interp_enable |= 1 << dst;

      if (!last_sh) {
         attr_ctrl[dst] = 0;
         continue;
      }

      /* find the matching VS/GS OUT for FS IN[i] */
      ctrl = 0;
      for (src = 0; src < vue_len; src++) {
         if (last_sh->out.semantic_names[vue_offset + src] != semantic ||
             last_sh->out.semantic_indices[vue_offset + src] != index)
            continue;

         ctrl = src;

         if (semantic == TGSI_SEMANTIC_COLOR && rasterizer->light_twoside &&
             src < vue_len - 1) {
            const int next = src + 1;

            if (last_sh->out.semantic_names[vue_offset + next] ==
                  TGSI_SEMANTIC_BCOLOR &&
                last_sh->out.semantic_indices[vue_offset + next] == index) {
               ctrl |= ATTRIBUTE_SWIZZLE_INPUTATTR_FACING <<
                  ATTRIBUTE_SWIZZLE_SHIFT;
               src++;
            }
         }

         break;
      }

      /* if there is no COLOR, try BCOLOR */
      if (src >= vue_len && semantic == TGSI_SEMANTIC_COLOR) {
         for (src = 0; src < vue_len; src++) {
            if (last_sh->out.semantic_names[vue_offset + src] !=
                  TGSI_SEMANTIC_BCOLOR ||
                last_sh->out.semantic_indices[vue_offset + src] != index)
               continue;

            ctrl = src;
            break;
         }
      }

      if (src < vue_len) {
         attr_ctrl[dst] = ctrl;
         if (max_src < src)
            max_src = src;
      }
      else {
         /*
          * The previous shader stage does not output this attribute.  The
          * value is supposed to be undefined for fs, unless the attribute
          * goes through point sprite replacement or the attribute is
          * TGSI_SEMANTIC_POSITION.  In all cases, we do not care which source
          * attribute is picked.
          *
          * We should update the fs code and omit the output of
          * TGSI_SEMANTIC_POSITION here.
          */
         attr_ctrl[dst] = 0;
      }
   }

   for (; dst < Elements(attr_ctrl); dst++)
      attr_ctrl[dst] = 0;

   /* only the first 16 attributes can be remapped */
   for (dst = 16; dst < Elements(attr_ctrl); dst++)
      assert(attr_ctrl[dst] == 0 || attr_ctrl[dst] == dst);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 248:
    *
    *     "It is UNDEFINED to set this field (Vertex URB Entry Read Length) to
    *      0 indicating no Vertex URB data to be read.
    *
    *      This field should be set to the minimum length required to read the
    *      maximum source attribute. The maximum source attribute is indicated
    *      by the maximum value of the enabled Attribute # Source Attribute if
    *      Attribute Swizzle Enable is set, Number of Output Attributes-1 if
    *      enable is not set.
    *
    *        read_length = ceiling((max_source_attr+1)/2)
    *
    *      [errata] Corruption/Hang possible if length programmed larger than
    *      recommended"
    */
   vue_len = max_src + 1;

   assert(fs->in.count <= 32);
   assert(vue_offset % 2 == 0);

   if (dev->gen >= ILO_GEN(7)) {
      dw[0] = fs->in.count << GEN7_SBE_NUM_OUTPUTS_SHIFT |
              (vue_len + 1) / 2 << GEN7_SBE_URB_ENTRY_READ_LENGTH_SHIFT |
              vue_offset / 2 << GEN7_SBE_URB_ENTRY_READ_OFFSET_SHIFT;

      if (last_sh)
         dw[0] |= GEN7_SBE_SWIZZLE_ENABLE;
   }
   else {
      dw[0] = fs->in.count << GEN6_SF_NUM_OUTPUTS_SHIFT |
              (vue_len + 1) / 2 << GEN6_SF_URB_ENTRY_READ_LENGTH_SHIFT |
              vue_offset / 2 << GEN6_SF_URB_ENTRY_READ_OFFSET_SHIFT;

      if (last_sh)
         dw[0] |= GEN6_SF_SWIZZLE_ENABLE;
   }

   switch (rasterizer->sprite_coord_mode) {
   case PIPE_SPRITE_COORD_UPPER_LEFT:
      dw[0] |= GEN6_SF_POINT_SPRITE_UPPERLEFT;
      break;
   case PIPE_SPRITE_COORD_LOWER_LEFT:
      dw[0] |= GEN6_SF_POINT_SPRITE_LOWERLEFT;
      break;
   }

   for (i = 0; i < 8; i++)
      dw[1 + i] = attr_ctrl[2 * i + 1] << 16 | attr_ctrl[2 * i];

   dw[9] = point_sprite_enable;
   dw[10] = const_interp_enable;

   /* WrapShortest enables */
   dw[11] = 0;
   dw[12] = 0;
}

static void
gen6_emit_3DSTATE_SF(const struct ilo_dev_info *dev,
                     const struct pipe_rasterizer_state *rasterizer,
                     const struct ilo_shader *fs,
                     const struct ilo_shader *last_sh,
                     struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x13);
   const uint8_t cmd_len = 20;
   uint32_t dw_raster[6], dw_sbe[13];

   ILO_GPE_VALID_GEN(dev, 6, 6);

   ilo_gpe_gen6_fill_3dstate_sf_raster(dev, rasterizer,
         1, PIPE_FORMAT_NONE, false, dw_raster, Elements(dw_raster));
   ilo_gpe_gen6_fill_3dstate_sf_sbe(dev, rasterizer,
         fs, last_sh, dw_sbe, Elements(dw_sbe));

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, dw_sbe[0]);
   ilo_cp_write_multi(cp, dw_raster, 6);
   ilo_cp_write_multi(cp, &dw_sbe[1], 12);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_WM(const struct ilo_dev_info *dev,
                     const struct ilo_shader *fs,
                     int num_samplers,
                     const struct pipe_rasterizer_state *rasterizer,
                     bool dual_blend, bool cc_may_kill,
                     struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x14);
   const uint8_t cmd_len = 9;
   const int num_samples = 1;
   uint32_t dw2, dw4, dw5, dw6;
   int max_threads;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   /* see brwCreateContext() */
   max_threads = (dev->gt == 2) ? 80 : 40;

   if (!fs) {
      ilo_cp_begin(cp, cmd_len);
      ilo_cp_write(cp, cmd | (cmd_len - 2));
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      /* honor the valid range even if dispatching is disabled */
      ilo_cp_write(cp, (max_threads - 1) << GEN6_WM_MAX_THREADS_SHIFT);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_end(cp);

      return;
   }

   dw2 = (num_samplers + 3) / 4 << GEN6_WM_SAMPLER_COUNT_SHIFT;
   if (false)
      dw2 |= GEN6_WM_FLOATING_POINT_MODE_ALT;

   dw4 = fs->in.start_grf << GEN6_WM_DISPATCH_START_GRF_SHIFT_0 |
         0 << GEN6_WM_DISPATCH_START_GRF_SHIFT_1 |
         0 << GEN6_WM_DISPATCH_START_GRF_SHIFT_2;

   if (true) {
      dw4 |= GEN6_WM_STATISTICS_ENABLE;
   }
   else {
      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 248:
       *
       *     "This bit (Statistics Enable) must be disabled if either of these
       *      bits is set: Depth Buffer Clear , Hierarchical Depth Buffer
       *      Resolve Enable or Depth Buffer Resolve Enable."
       */
      dw4 |= GEN6_WM_DEPTH_CLEAR;
      dw4 |= GEN6_WM_DEPTH_RESOLVE;
      dw4 |= GEN6_WM_HIERARCHICAL_DEPTH_RESOLVE;
   }

   dw5 = (max_threads - 1) << GEN6_WM_MAX_THREADS_SHIFT |
         GEN6_WM_LINE_AA_WIDTH_2_0;

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 275:
    *
    *     "This bit (Pixel Shader Kill Pixel), if ENABLED, indicates that the
    *      PS kernel or color calculator has the ability to kill (discard)
    *      pixels or samples, other than due to depth or stencil testing.
    *      This bit is required to be ENABLED in the following situations:
    *
    *      The API pixel shader program contains "killpix" or "discard"
    *      instructions, or other code in the pixel shader kernel that can
    *      cause the final pixel mask to differ from the pixel mask received
    *      on dispatch.
    *
    *      A sampler with chroma key enabled with kill pixel mode is used by
    *      the pixel shader.
    *
    *      Any render target has Alpha Test Enable or AlphaToCoverage Enable
    *      enabled.
    *
    *      The pixel shader kernel generates and outputs oMask.
    *
    *      Note: As ClipDistance clipping is fully supported in hardware and
    *      therefore not via PS instructions, there should be no need to
    *      ENABLE this bit due to ClipDistance clipping."
    */
   if (fs->has_kill || cc_may_kill)
      dw5 |= GEN6_WM_KILL_ENABLE;

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 275:
    *
    *     "If a NULL Depth Buffer is selected, the Pixel Shader Computed Depth
    *      field must be set to disabled."
    *
    * TODO This is not checked yet.
    */
   if (fs->out.has_pos)
      dw5 |= GEN6_WM_COMPUTED_DEPTH;

   if (fs->in.has_pos)
      dw5 |= GEN6_WM_USES_SOURCE_DEPTH | GEN6_WM_USES_SOURCE_W;

   /*
    * Set this bit if
    *
    *  a) fs writes colors and color is not masked, or
    *  b) fs writes depth, or
    *  c) fs or cc kills
    */
   if (true)
      dw5 |= GEN6_WM_DISPATCH_ENABLE;

   /* same value as in 3DSTATE_SF */
   if (rasterizer->line_smooth)
      dw5 |= GEN6_WM_LINE_END_CAP_AA_WIDTH_1_0;

   if (rasterizer->poly_stipple_enable)
      dw5 |= GEN6_WM_POLYGON_STIPPLE_ENABLE;
   if (rasterizer->line_stipple_enable)
      dw5 |= GEN6_WM_LINE_STIPPLE_ENABLE;

   if (dual_blend)
      dw5 |= GEN6_WM_DUAL_SOURCE_BLEND_ENABLE;

   if (fs->dispatch_16)
      dw5 |= GEN6_WM_16_DISPATCH_ENABLE;
   else
      dw5 |= GEN6_WM_8_DISPATCH_ENABLE;

   dw6 = fs->in.count << GEN6_WM_NUM_SF_OUTPUTS_SHIFT |
         GEN6_WM_POSOFFSET_NONE |
         GEN6_WM_POSITION_ZW_PIXEL |
         fs->in.barycentric_interpolation_mode <<
           GEN6_WM_BARYCENTRIC_INTERPOLATION_MODE_SHIFT;

   if (rasterizer->bottom_edge_rule)
      dw6 |= GEN6_WM_POINT_RASTRULE_UPPER_RIGHT;

   if (num_samples > 1) {
      if (rasterizer->multisample)
         dw6 |= GEN6_WM_MSRAST_ON_PATTERN;
      else
         dw6 |= GEN6_WM_MSRAST_OFF_PIXEL;
      dw6 |= GEN6_WM_MSDISPMODE_PERPIXEL;
   }
   else {
      dw6 |= GEN6_WM_MSRAST_OFF_PIXEL |
             GEN6_WM_MSDISPMODE_PERSAMPLE;
   }

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, fs->cache_offset);
   ilo_cp_write(cp, dw2);
   ilo_cp_write(cp, 0); /* scratch */
   ilo_cp_write(cp, dw4);
   ilo_cp_write(cp, dw5);
   ilo_cp_write(cp, dw6);
   ilo_cp_write(cp, 0); /* kernel 1 */
   ilo_cp_write(cp, 0); /* kernel 2 */
   ilo_cp_end(cp);
}

static unsigned
gen6_fill_3dstate_constant(const struct ilo_dev_info *dev,
                           const uint32_t *bufs, const int *sizes,
                           int num_bufs, int max_read_length,
                           uint32_t *dw, int num_dwords)
{
   unsigned enabled = 0x0;
   int total_read_length, i;

   assert(num_dwords == 4);

   total_read_length = 0;
   for (i = 0; i < 4; i++) {
      if (i < num_bufs && sizes[i]) {
         /* in 256-bit units minus one */
         const int read_len = (sizes[i] + 31) / 32 - 1;

         assert(bufs[i] % 32 == 0);
         assert(read_len < 32);

         enabled |= 1 << i;
         dw[i] = bufs[i] | read_len;

         total_read_length += read_len + 1;
      }
      else {
         dw[i] = 0;
      }
   }

   assert(total_read_length <= max_read_length);

   return enabled;
}

static void
gen6_emit_3DSTATE_CONSTANT_VS(const struct ilo_dev_info *dev,
                              const uint32_t *bufs, const int *sizes,
                              int num_bufs,
                              struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x15);
   const uint8_t cmd_len = 5;
   uint32_t buf_dw[4], buf_enabled;

   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(num_bufs <= 4);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 138:
    *
    *     "The sum of all four read length fields (each incremented to
    *      represent the actual read length) must be less than or equal to 32"
    */
   buf_enabled = gen6_fill_3dstate_constant(dev,
         bufs, sizes, num_bufs, 32, buf_dw, Elements(buf_dw));

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2) | buf_enabled << 12);
   ilo_cp_write(cp, buf_dw[0]);
   ilo_cp_write(cp, buf_dw[1]);
   ilo_cp_write(cp, buf_dw[2]);
   ilo_cp_write(cp, buf_dw[3]);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_CONSTANT_GS(const struct ilo_dev_info *dev,
                              const uint32_t *bufs, const int *sizes,
                              int num_bufs,
                              struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x16);
   const uint8_t cmd_len = 5;
   uint32_t buf_dw[4], buf_enabled;

   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(num_bufs <= 4);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 161:
    *
    *     "The sum of all four read length fields (each incremented to
    *      represent the actual read length) must be less than or equal to 64"
    */
   buf_enabled = gen6_fill_3dstate_constant(dev,
         bufs, sizes, num_bufs, 64, buf_dw, Elements(buf_dw));

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2) | buf_enabled << 12);
   ilo_cp_write(cp, buf_dw[0]);
   ilo_cp_write(cp, buf_dw[1]);
   ilo_cp_write(cp, buf_dw[2]);
   ilo_cp_write(cp, buf_dw[3]);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_CONSTANT_PS(const struct ilo_dev_info *dev,
                              const uint32_t *bufs, const int *sizes,
                              int num_bufs,
                              struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x17);
   const uint8_t cmd_len = 5;
   uint32_t buf_dw[4], buf_enabled;

   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(num_bufs <= 4);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 287:
    *
    *     "The sum of all four read length fields (each incremented to
    *      represent the actual read length) must be less than or equal to 64"
    */
   buf_enabled = gen6_fill_3dstate_constant(dev,
         bufs, sizes, num_bufs, 64, buf_dw, Elements(buf_dw));

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2) | buf_enabled << 12);
   ilo_cp_write(cp, buf_dw[0]);
   ilo_cp_write(cp, buf_dw[1]);
   ilo_cp_write(cp, buf_dw[2]);
   ilo_cp_write(cp, buf_dw[3]);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_SAMPLE_MASK(const struct ilo_dev_info *dev,
                              unsigned sample_mask,
                              struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x0, 0x18);
   const uint8_t cmd_len = 2;
   const unsigned valid_mask = 0xf;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   sample_mask &= valid_mask;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, sample_mask);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_DRAWING_RECTANGLE(const struct ilo_dev_info *dev,
                                    unsigned x, unsigned y,
                                    unsigned width, unsigned height,
                                    struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x1, 0x00);
   const uint8_t cmd_len = 4;
   unsigned xmax = x + width - 1;
   unsigned ymax = y + height - 1;
   int rect_limit;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   if (dev->gen >= ILO_GEN(7)) {
      rect_limit = 16383;
   }
   else {
      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 230:
       *
       *     "[DevSNB] Errata: This field (Clipped Drawing Rectangle Y Min)
       *      must be an even number"
       */
      assert(y % 2 == 0);

      rect_limit = 8191;
   }

   if (x > rect_limit) x = rect_limit;
   if (y > rect_limit) y = rect_limit;
   if (xmax > rect_limit) xmax = rect_limit;
   if (ymax > rect_limit) ymax = rect_limit;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, y << 16 | x);
   ilo_cp_write(cp, ymax << 16 | xmax);

   /*
    * There is no need to set the origin.  It is intended to support front
    * buffer rendering.
    */
   ilo_cp_write(cp, 0);

   ilo_cp_end(cp);
}

static int
gen6_get_depth_buffer_format(const struct ilo_dev_info *dev,
                             enum pipe_format format,
                             bool hiz,
                             bool separate_stencil,
                             bool *has_depth,
                             bool *has_stencil)
{
   int depth_format;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   *has_depth = true;
   *has_stencil = false;

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 317:
    *
    *     "If this field (Hierarchical Depth Buffer Enable) is enabled, the
    *      Surface Format of the depth buffer cannot be
    *      D32_FLOAT_S8X24_UINT or D24_UNORM_S8_UINT. Use of stencil
    *      requires the separate stencil buffer."
    *
    * From the Ironlake PRM, volume 2 part 1, page 330:
    *
    *     "If this field (Separate Stencil Buffer Enable) is disabled, the
    *      Surface Format of the depth buffer cannot be D24_UNORM_X8_UINT."
    *
    * There is no similar restriction for GEN6.  But when D24_UNORM_X8_UINT
    * is indeed used, the depth values output by the fragment shaders will
    * be different when read back.
    *
    * As for GEN7+, separate_stencil_buffer is always true.
    */
   switch (format) {
   case PIPE_FORMAT_Z16_UNORM:
      depth_format = BRW_DEPTHFORMAT_D16_UNORM;
      break;
   case PIPE_FORMAT_Z32_FLOAT:
      depth_format = BRW_DEPTHFORMAT_D32_FLOAT;
      break;
   case PIPE_FORMAT_Z24X8_UNORM:
      depth_format = (separate_stencil) ?
         BRW_DEPTHFORMAT_D24_UNORM_X8_UINT :
         BRW_DEPTHFORMAT_D24_UNORM_S8_UINT;
      break;
   case PIPE_FORMAT_Z24_UNORM_S8_UINT:
      depth_format = (separate_stencil) ?
         BRW_DEPTHFORMAT_D24_UNORM_X8_UINT :
         BRW_DEPTHFORMAT_D24_UNORM_S8_UINT;
      *has_stencil = true;
      break;
   case PIPE_FORMAT_Z32_FLOAT_S8X24_UINT:
      depth_format = (separate_stencil) ?
         BRW_DEPTHFORMAT_D32_FLOAT :
         BRW_DEPTHFORMAT_D32_FLOAT_S8X24_UINT;
      *has_stencil = true;
      break;
   case PIPE_FORMAT_S8_UINT:
      if (separate_stencil) {
         depth_format = BRW_DEPTHFORMAT_D32_FLOAT;
         *has_depth = false;
         *has_stencil = true;
         break;
      }
      /* fall through */
   default:
      assert(!"unsupported depth/stencil format");
      depth_format = BRW_DEPTHFORMAT_D32_FLOAT;
      *has_depth = false;
      *has_stencil = false;
      break;
   }

   return depth_format;
}

void
ilo_gpe_gen6_emit_3DSTATE_DEPTH_BUFFER(const struct ilo_dev_info *dev,
                                       const struct pipe_surface *surface,
                                       const struct pipe_depth_stencil_alpha_state *dsa,
                                       bool hiz,
                                       struct ilo_cp *cp)
{
   const uint32_t cmd = (dev->gen >= ILO_GEN(7)) ?
      ILO_GPE_CMD(0x3, 0x0, 0x05) : ILO_GPE_CMD(0x3, 0x1, 0x05);
   const uint8_t cmd_len = 7;
   const int max_2d_size = (dev->gen >= ILO_GEN(7)) ? 16384 : 8192;
   struct ilo_resource *res;
   uint32_t dw1, dw3;
   uint32_t slice_offset, x_offset, y_offset;
   int surface_type, depth_format, width, height;
   bool separate_stencil, has_depth, has_stencil;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   if (dev->gen >= ILO_GEN(7)) {
      separate_stencil = true;
   }
   else {
      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 317:
       *
       *     "This field (Separate Stencil Buffer Enable) must be set to the
       *      same value (enabled or disabled) as Hierarchical Depth Buffer
       *      Enable."
       */
      separate_stencil = hiz;
   }

   if (surface) {
      depth_format = gen6_get_depth_buffer_format(dev,
            surface->format, hiz, separate_stencil, &has_depth, &has_stencil);
   }
   else {
      has_depth = false;
      has_stencil = false;
   }

   if (!has_depth && !has_stencil) {
      dw1 = BRW_SURFACE_NULL << 29 |
            BRW_DEPTHFORMAT_D32_FLOAT << 18;

      /* Y-tiled */
      if (dev->gen == ILO_GEN(6)) {
         dw1 |= 1 << 27 |
                1 << 26;
      }

      ilo_cp_begin(cp, cmd_len);
      ilo_cp_write(cp, cmd | (cmd_len - 2));
      ilo_cp_write(cp, dw1);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_end(cp);

      return;
   }

   res = ilo_resource(surface->texture);
   surface_type = ilo_gpe_gen6_translate_texture(res->base.target);
   width = surface->width;
   height = surface->height;

   /*
    * we always treat the resource as non-mipmapped and set the slice/x/y
    * offsets manually
    */
   slice_offset = ilo_resource_get_slice_offset(res,
         surface->u.tex.level, surface->u.tex.first_layer,
         true, &x_offset, &y_offset);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 326:
    *
    *     "The 3 LSBs of both offsets (Depth Coordinate Offset Y and Depth
    *      Coordinate Offset X) must be zero to ensure correct alignment"
    *
    * XXX Skip the check for gen6, which seems to be fine.  We need to make
    * sure that does not happen eventually.
    */
   if (dev->gen >= ILO_GEN(7)) {
      assert((x_offset & 7) == 0 && (y_offset & 7) == 0);
      x_offset &= ~7;
      y_offset &= ~7;
   }

   width += x_offset;
   height += y_offset;

   /* required for GEN6+ */
   assert(res->tiling == INTEL_TILING_Y);

   assert(res->bo_stride > 0 && res->bo_stride < 128 * 1024 &&
         res->bo_stride % 128 == 0);
   assert(surface->u.tex.first_layer == surface->u.tex.last_layer);
   assert(width <= res->bo_stride);

   /* we have to treat them as 2D surfaces */
   if (surface_type == BRW_SURFACE_CUBE) {
      assert(surface->width == surface->height);
      /* we will set slice_offset to point to the single face */
      surface_type = BRW_SURFACE_2D;
   }
   else if (surface_type == BRW_SURFACE_1D && height > 1) {
      assert(surface->height == 1);
      surface_type = BRW_SURFACE_2D;
   }

   switch (surface_type) {
   case BRW_SURFACE_1D:
      assert(width <= max_2d_size && height == 1);
      break;
   case BRW_SURFACE_2D:
      assert(width <= max_2d_size && height <= max_2d_size);
      break;
   case BRW_SURFACE_3D:
      assert(width <= 2048 && height <= 2048);
      assert(x_offset == 0 && y_offset == 0);
      break;
   case BRW_SURFACE_CUBE:
      assert(width <= max_2d_size && height <= max_2d_size &&
             width == height);
      assert(x_offset == 0 && y_offset == 0);
      break;
   default:
      assert(!"unexpected depth surface type");
      break;
   }

   dw1 = surface_type << 29 |
         depth_format << 18 |
         (res->bo_stride - 1);

   if (dev->gen >= ILO_GEN(7)) {
      if (has_depth) {
         if (dsa->depth.writemask)
            dw1 |= 1 << 28;
         if (hiz)
            dw1 |= 1 << 22;
      }

      if (has_stencil &&
          (dsa->stencil[0].writemask || dsa->stencil[1].writemask))
         dw1 |= 1 << 27;

      dw3 = (height - 1) << 18 |
            (width - 1) << 4;
   }
   else {
      dw1 |= (res->tiling != INTEL_TILING_NONE) << 27 |
             (res->tiling == INTEL_TILING_Y) << 26;

      if (hiz) {
         dw1 |= 1 << 22 |
                1 << 21;
      }

      dw3 = (height - 1) << 19 |
            (width - 1) << 6 |
            BRW_SURFACE_MIPMAPLAYOUT_BELOW << 1;
   }

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, dw1);

   if (has_depth) {
      ilo_cp_write_bo(cp, slice_offset, res->bo,
            INTEL_DOMAIN_RENDER, INTEL_DOMAIN_RENDER);
   }
   else {
      ilo_cp_write(cp, 0);
   }

   ilo_cp_write(cp, dw3);
   ilo_cp_write(cp, 0);
   ilo_cp_write(cp, y_offset << 16 | x_offset);
   ilo_cp_write(cp, 0);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_DEPTH_BUFFER(const struct ilo_dev_info *dev,
                               const struct pipe_surface *surface,
                               bool hiz,
                               struct ilo_cp *cp)
{
   ilo_gpe_gen6_emit_3DSTATE_DEPTH_BUFFER(dev, surface, NULL, hiz, cp);
}

static void
gen6_emit_3DSTATE_POLY_STIPPLE_OFFSET(const struct ilo_dev_info *dev,
                                      int x_offset, int y_offset,
                                      struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x1, 0x06);
   const uint8_t cmd_len = 2;

   ILO_GPE_VALID_GEN(dev, 6, 7);
   assert(x_offset >= 0 && x_offset <= 31);
   assert(y_offset >= 0 && y_offset <= 31);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, x_offset << 8 | y_offset);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_POLY_STIPPLE_PATTERN(const struct ilo_dev_info *dev,
                                       const struct pipe_poly_stipple *pattern,
                                       struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x1, 0x07);
   const uint8_t cmd_len = 33;
   int i;

   ILO_GPE_VALID_GEN(dev, 6, 7);
   assert(Elements(pattern->stipple) == 32);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   for (i = 0; i < 32; i++)
      ilo_cp_write(cp, pattern->stipple[i]);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_LINE_STIPPLE(const struct ilo_dev_info *dev,
                               unsigned pattern, unsigned factor,
                               struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x1, 0x08);
   const uint8_t cmd_len = 3;
   unsigned inverse;

   ILO_GPE_VALID_GEN(dev, 6, 7);
   assert((pattern & 0xffff) == pattern);
   assert(factor >= 1 && factor <= 256);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, pattern);

   if (dev->gen >= ILO_GEN(7)) {
      /* in U1.16 */
      inverse = (unsigned) (65536.0f / factor);
      ilo_cp_write(cp, inverse << 15 | factor);
   }
   else {
      /* in U1.13 */
      inverse = (unsigned) (8192.0f / factor);
      ilo_cp_write(cp, inverse << 16 | factor);
   }

   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_AA_LINE_PARAMETERS(const struct ilo_dev_info *dev,
                                     struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x1, 0x0a);
   const uint8_t cmd_len = 3;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, 0 << 16 | 0);
   ilo_cp_write(cp, 0 << 16 | 0);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_GS_SVB_INDEX(const struct ilo_dev_info *dev,
                               int index, unsigned svbi,
                               unsigned max_svbi,
                               bool load_vertex_count,
                               struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x1, 0x0b);
   const uint8_t cmd_len = 4;
   uint32_t dw1;

   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(index >= 0 && index < 4);

   dw1 = index << SVB_INDEX_SHIFT;
   if (load_vertex_count)
      dw1 |= SVB_LOAD_INTERNAL_VERTEX_COUNT;

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, dw1);
   ilo_cp_write(cp, svbi);
   ilo_cp_write(cp, max_svbi);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_MULTISAMPLE(const struct ilo_dev_info *dev,
                              int num_samples,
                              const uint32_t *packed_sample_pos,
                              bool pixel_location_center,
                              struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x1, 0x0d);
   const uint8_t cmd_len = (dev->gen >= ILO_GEN(7)) ? 4 : 3;
   uint32_t dw1, dw2, dw3;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   dw1 = (pixel_location_center) ?
      MS_PIXEL_LOCATION_CENTER : MS_PIXEL_LOCATION_UPPER_LEFT;

   switch (num_samples) {
   case 0:
   case 1:
      dw1 |= MS_NUMSAMPLES_1;
      dw2 = 0;
      dw3 = 0;
      break;
   case 4:
      dw1 |= MS_NUMSAMPLES_4;
      dw2 = packed_sample_pos[0];
      dw3 = 0;
      break;
   case 8:
      assert(dev->gen >= ILO_GEN(7));
      dw1 |= MS_NUMSAMPLES_8;
      dw2 = packed_sample_pos[0];
      dw3 = packed_sample_pos[1];
      break;
   default:
      assert(!"unsupported sample count");
      dw1 |= MS_NUMSAMPLES_1;
      dw2 = 0;
      dw3 = 0;
      break;
   }

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, dw1);
   ilo_cp_write(cp, dw2);
   if (dev->gen >= ILO_GEN(7))
      ilo_cp_write(cp, dw3);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_STENCIL_BUFFER(const struct ilo_dev_info *dev,
                                 const struct pipe_surface *surface,
                                 struct ilo_cp *cp)
{
   const uint32_t cmd = (dev->gen >= ILO_GEN(7)) ?
      ILO_GPE_CMD(0x3, 0x0, 0x06) :
      ILO_GPE_CMD(0x3, 0x1, 0x0e);
   const uint8_t cmd_len = 3;
   struct ilo_resource *res;
   uint32_t slice_offset;
   int pitch;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   if (!surface) {
      ilo_cp_begin(cp, cmd_len);
      ilo_cp_write(cp, cmd | (cmd_len - 2));
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_end(cp);

      return;
   }

   res = ilo_resource(surface->texture);

   /* TODO */
   slice_offset = 0;

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 329:
    *
    *     "The pitch must be set to 2x the value computed based on width, as
    *      the stencil buffer is stored with two rows interleaved."
    */
   pitch = 2 * res->bo_stride;
   assert(pitch > 0 && pitch < 128 * 1024 && pitch % 128 == 0);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, pitch - 1);
   ilo_cp_write_bo(cp, slice_offset, res->bo,
         INTEL_DOMAIN_RENDER, INTEL_DOMAIN_RENDER);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_HIER_DEPTH_BUFFER(const struct ilo_dev_info *dev,
                                    const struct pipe_surface *surface,
                                    struct ilo_cp *cp)
{
   const uint32_t cmd = (dev->gen >= ILO_GEN(7)) ?
      ILO_GPE_CMD(0x3, 0x0, 0x07) :
      ILO_GPE_CMD(0x3, 0x1, 0x0f);
   const uint8_t cmd_len = 3;
   struct ilo_resource *res;
   uint32_t slice_offset;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   if (!surface) {
      ilo_cp_begin(cp, cmd_len);
      ilo_cp_write(cp, cmd | (cmd_len - 2));
      ilo_cp_write(cp, 0);
      ilo_cp_write(cp, 0);
      ilo_cp_end(cp);

      return;
   }

   res = ilo_resource(surface->texture);

   /* TODO */
   slice_offset = 0;

   assert(res->bo_stride > 0 && res->bo_stride < 128 * 1024 &&
          res->bo_stride % 128 == 0);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, res->bo_stride - 1);
   ilo_cp_write_bo(cp, slice_offset, res->bo,
         INTEL_DOMAIN_RENDER, INTEL_DOMAIN_RENDER);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DSTATE_CLEAR_PARAMS(const struct ilo_dev_info *dev,
                               uint32_t clear_val,
                               struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x1, 0x10);
   const uint8_t cmd_len = 2;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2) |
                    GEN5_DEPTH_CLEAR_VALID);
   ilo_cp_write(cp, clear_val);
   ilo_cp_end(cp);
}

static void
gen6_emit_PIPE_CONTROL(const struct ilo_dev_info *dev,
                       uint32_t dw1,
                       struct intel_bo *bo, uint32_t bo_offset,
                       bool write_qword,
                       struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x2, 0x00);
   const uint8_t cmd_len = (write_qword) ? 5 : 4;
   const uint32_t read_domains = INTEL_DOMAIN_INSTRUCTION;
   const uint32_t write_domain = INTEL_DOMAIN_INSTRUCTION;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   if (dw1 & PIPE_CONTROL_CS_STALL) {
      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 73:
       *
       *     "1 of the following must also be set (when CS stall is set):
       *
       *       * Depth Cache Flush Enable ([0] of DW1)
       *       * Stall at Pixel Scoreboard ([1] of DW1)
       *       * Depth Stall ([13] of DW1)
       *       * Post-Sync Operation ([13] of DW1)
       *       * Render Target Cache Flush Enable ([12] of DW1)
       *       * Notify Enable ([8] of DW1)"
       *
       * From the Ivy Bridge PRM, volume 2 part 1, page 61:
       *
       *     "One of the following must also be set (when CS stall is set):
       *
       *       * Render Target Cache Flush Enable ([12] of DW1)
       *       * Depth Cache Flush Enable ([0] of DW1)
       *       * Stall at Pixel Scoreboard ([1] of DW1)
       *       * Depth Stall ([13] of DW1)
       *       * Post-Sync Operation ([13] of DW1)"
       */
      uint32_t bit_test = PIPE_CONTROL_WRITE_FLUSH |
                          PIPE_CONTROL_DEPTH_CACHE_FLUSH |
                          PIPE_CONTROL_STALL_AT_SCOREBOARD |
                          PIPE_CONTROL_DEPTH_STALL;

      /* post-sync op */
      bit_test |= PIPE_CONTROL_WRITE_IMMEDIATE |
                  PIPE_CONTROL_WRITE_DEPTH_COUNT |
                  PIPE_CONTROL_WRITE_TIMESTAMP;

      if (dev->gen == ILO_GEN(6))
         bit_test |= PIPE_CONTROL_INTERRUPT_ENABLE;

      assert(dw1 & bit_test);
   }

   if (dw1 & PIPE_CONTROL_DEPTH_STALL) {
      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 73:
       *
       *     "Following bits must be clear (when Depth Stall is set):
       *
       *       * Render Target Cache Flush Enable ([12] of DW1)
       *       * Depth Cache Flush Enable ([0] of DW1)"
       */
      assert(!(dw1 & (PIPE_CONTROL_WRITE_FLUSH |
                      PIPE_CONTROL_DEPTH_CACHE_FLUSH)));
   }

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2));
   ilo_cp_write(cp, dw1);
   ilo_cp_write_bo(cp, bo_offset, bo, read_domains, write_domain);
   ilo_cp_write(cp, 0);
   if (write_qword)
      ilo_cp_write(cp, 0);
   ilo_cp_end(cp);
}

static void
gen6_emit_3DPRIMITIVE(const struct ilo_dev_info *dev,
                      const struct pipe_draw_info *info,
                      bool rectlist,
                      struct ilo_cp *cp)
{
   const uint32_t cmd = ILO_GPE_CMD(0x3, 0x3, 0x00);
   const uint8_t cmd_len = 6;
   const int prim = (rectlist) ?
      _3DPRIM_RECTLIST : ilo_gpe_gen6_translate_pipe_prim(info->mode);
   const int vb_access = (info->indexed) ?
      GEN4_3DPRIM_VERTEXBUFFER_ACCESS_RANDOM :
      GEN4_3DPRIM_VERTEXBUFFER_ACCESS_SEQUENTIAL;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   ilo_cp_begin(cp, cmd_len);
   ilo_cp_write(cp, cmd | (cmd_len - 2) |
                    prim << GEN4_3DPRIM_TOPOLOGY_TYPE_SHIFT |
                    vb_access);
   ilo_cp_write(cp, info->count);
   ilo_cp_write(cp, info->start);
   ilo_cp_write(cp, info->instance_count);
   ilo_cp_write(cp, info->start_instance);
   ilo_cp_write(cp, info->index_bias);
   ilo_cp_end(cp);
}

static uint32_t
gen6_emit_INTERFACE_DESCRIPTOR_DATA(const struct ilo_dev_info *dev,
                                    const struct ilo_shader **cs,
                                    uint32_t *sampler_state,
                                    int *num_samplers,
                                    uint32_t *binding_table_state,
                                    int *num_surfaces,
                                    int num_ids,
                                    struct ilo_cp *cp)
{
   /*
    * From the Sandy Bridge PRM, volume 2 part 2, page 34:
    *
    *     "(Interface Descriptor Total Length) This field must have the same
    *      alignment as the Interface Descriptor Data Start Address.
    *
    *      It must be DQWord (32-byte) aligned..."
    *
    * From the Sandy Bridge PRM, volume 2 part 2, page 35:
    *
    *     "(Interface Descriptor Data Start Address) Specifies the 32-byte
    *      aligned address of the Interface Descriptor data."
    */
   const int state_align = 32 / 4;
   const int state_len = (32 / 4) * num_ids;
   uint32_t state_offset, *dw;
   int i;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   dw = ilo_cp_steal_ptr(cp, "INTERFACE_DESCRIPTOR_DATA",
         state_len, state_align, &state_offset);

   for (i = 0; i < num_ids; i++) {
      int curbe_read_len;

      curbe_read_len = (cs[i]->pcb.clip_state_size + 31) / 32;

      dw[0] = cs[i]->cache_offset;
      dw[1] = 1 << 18; /* SPF */
      dw[2] = sampler_state[i] |
              (num_samplers[i] + 3) / 4 << 2;
      dw[3] = binding_table_state[i] |
              num_surfaces[i];
      dw[4] = curbe_read_len << 16 |  /* CURBE Read Length */
              0;                      /* CURBE Read Offset */
      dw[5] = 0; /* Barrier ID */
      dw[6] = 0;
      dw[7] = 0;

      dw += 8;
   }

   return state_offset;
}

void
ilo_gpe_gen6_fill_SF_VIEWPORT(const struct ilo_dev_info *dev,
                              const struct pipe_viewport_state *viewports,
                              int num_viewports,
                              uint32_t *dw, int num_dwords)
{
   int i;

   ILO_GPE_VALID_GEN(dev, 6, 7);
   assert(num_dwords == 8 * num_viewports);

   for (i = 0; i < num_viewports; i++) {
      const struct pipe_viewport_state *vp = &viewports[i];

      dw[0] = fui(vp->scale[0]);
      dw[1] = fui(vp->scale[1]);
      dw[2] = fui(vp->scale[2]);
      dw[3] = fui(vp->translate[0]);
      dw[4] = fui(vp->translate[1]);
      dw[5] = fui(vp->translate[2]);

      /* padding */
      dw[6] = 0;
      dw[7] = 0;

      dw += 8;
   }
}

void
ilo_gpe_gen6_fill_CLIP_VIEWPORT(const struct ilo_dev_info *dev,
                                const struct pipe_viewport_state *viewports,
                                int num_viewports,
                                uint32_t *dw, int num_dwords)
{
   int i;

   ILO_GPE_VALID_GEN(dev, 6, 7);
   assert(num_dwords == 4 * num_viewports);

   /*
    * CLIP_VIEWPORT specifies the guard band.
    *
    * Clipping an object that is not entirely inside or outside the viewport
    * (that is, trivially accepted or rejected) is expensive.  Guard band test
    * allows clipping to be skipped in this stage and let the renderer dicards
    * pixels that are outside the viewport.
    *
    * The reason that we need CLIP_VIEWPORT is that the renderer has a limit
    * on the object size.  We have to clip normally when the object exceeds
    * the limit.
    */

   for (i = 0; i < num_viewports; i++) {
      const struct pipe_viewport_state *vp = &viewports[i];
      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 234:
       *
       *     "Per-Device Guardband Extents
       *
       *      * Supported X,Y ScreenSpace "Guardband" Extent: [-16K,16K-1]
       *      * Maximum Post-Clamp Delta (X or Y): 16K"
       *
       *     "In addition, in order to be correctly rendered, objects must
       *      have a screenspace bounding box not exceeding 8K in the X or Y
       *      direction.  This additional restriction must also be
       *      comprehended by software, i.e., enforced by use of clipping."
       *
       * From the Ivy Bridge PRM, volume 2 part 1, page 248:
       *
       *     "Per-Device Guardband Extents
       *
       *      * Supported X,Y ScreenSpace "Guardband" Extent: [-32K,32K-1]
       *      * Maximum Post-Clamp Delta (X or Y): N/A"
       *
       *     "In addition, in order to be correctly rendered, objects must
       *      have a screenspace bounding box not exceeding 8K in the X or Y
       *      direction. This additional restriction must also be comprehended
       *      by software, i.e., enforced by use of clipping."
       *
       * Combined, the bounding box of any object can not exceed 8K in both
       * width and height.
       *
       * Below we set the guardband as a squre of length 8K, centered at where
       * the viewport is.  This makes sure all objects passing the GB test are
       * valid to the renderer, and those failing the XY clipping have a
       * better chance of passing the GB test.
       */
      const float xscale = fabs(vp->scale[0]);
      const float yscale = fabs(vp->scale[1]);
      const int max_extent = (dev->gen >= ILO_GEN(7)) ? 32768 : 16384;
      const int half_len = 8192 / 2;
      int center_x = (int) vp->translate[0];
      int center_y = (int) vp->translate[1];
      float xmin, xmax, ymin, ymax;

      /* make sure the guardband is within the valid range */
      if (center_x - half_len < -max_extent)
         center_x = -max_extent + half_len;
      else if (center_x + half_len > max_extent)
         center_x = max_extent - half_len;

      if (center_y - half_len < -max_extent)
         center_y = -max_extent + half_len;
      else if (center_y + half_len > max_extent)
         center_y = max_extent - half_len;

      xmin = (float) (center_x - half_len);
      xmax = (float) (center_x + half_len);
      ymin = (float) (center_y - half_len);
      ymax = (float) (center_y + half_len);

      /* screen space to NDC space */
      xmin = (xmin - vp->translate[0]) / xscale;
      xmax = (xmax - vp->translate[0]) / xscale;
      ymin = (ymin - vp->translate[1]) / yscale;
      ymax = (ymax - vp->translate[1]) / yscale;

      dw[0] = fui(xmin);
      dw[1] = fui(xmax);
      dw[2] = fui(ymin);
      dw[3] = fui(ymax);

      dw += 4;
   }
}

static void
gen6_fill_CC_VIEWPORT(const struct ilo_dev_info *dev,
                      const struct pipe_viewport_state *viewports,
                      int num_viewports,
                      uint32_t *dw, int num_dwords)
{
   int i;

   ILO_GPE_VALID_GEN(dev, 6, 7);
   assert(num_dwords == 2 * num_viewports);

   for (i = 0; i < num_viewports; i++) {
      const struct pipe_viewport_state *vp = &viewports[i];
      const float scale = fabs(vp->scale[2]);
      const float min = vp->translate[2] - scale;
      const float max = vp->translate[2] + scale;

      dw[0] = fui(min);
      dw[1] = fui(max);

      dw += 2;
   }
}

static uint32_t
gen6_emit_SF_VIEWPORT(const struct ilo_dev_info *dev,
                      const struct pipe_viewport_state *viewports,
                      int num_viewports,
                      struct ilo_cp *cp)
{
   const int state_align = 32 / 4;
   const int state_len = 8 * num_viewports;
   uint32_t state_offset, *dw;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 262:
    *
    *     "The viewport-specific state used by the SF unit (SF_VIEWPORT) is
    *      stored as an array of up to 16 elements..."
    */
   assert(num_viewports && num_viewports <= 16);

   dw = ilo_cp_steal_ptr(cp, "SF_VIEWPORT",
         state_len, state_align, &state_offset);

   ilo_gpe_gen6_fill_SF_VIEWPORT(dev,
         viewports, num_viewports, dw, state_len);

   return state_offset;
}

static uint32_t
gen6_emit_CLIP_VIEWPORT(const struct ilo_dev_info *dev,
                        const struct pipe_viewport_state *viewports,
                        int num_viewports,
                        struct ilo_cp *cp)
{
   const int state_align = 32 / 4;
   const int state_len = 4 * num_viewports;
   uint32_t state_offset, *dw;

   ILO_GPE_VALID_GEN(dev, 6, 6);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 193:
    *
    *     "The viewport-related state is stored as an array of up to 16
    *      elements..."
    */
   assert(num_viewports && num_viewports <= 16);

   dw = ilo_cp_steal_ptr(cp, "CLIP_VIEWPORT",
         state_len, state_align, &state_offset);

   ilo_gpe_gen6_fill_CLIP_VIEWPORT(dev,
         viewports, num_viewports, dw, state_len);

   return state_offset;
}

static uint32_t
gen6_emit_CC_VIEWPORT(const struct ilo_dev_info *dev,
                      const struct pipe_viewport_state *viewports,
                      int num_viewports,
                      struct ilo_cp *cp)
{
   const int state_align = 32 / 4;
   const int state_len = 2 * num_viewports;
   uint32_t state_offset, *dw;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 385:
    *
    *     "The viewport state is stored as an array of up to 16 elements..."
    */
   assert(num_viewports && num_viewports <= 16);

   dw = ilo_cp_steal_ptr(cp, "CC_VIEWPORT",
         state_len, state_align, &state_offset);

   gen6_fill_CC_VIEWPORT(dev, viewports, num_viewports, dw, state_len);

   return state_offset;
}

static uint32_t
gen6_emit_COLOR_CALC_STATE(const struct ilo_dev_info *dev,
                           const struct pipe_stencil_ref *stencil_ref,
                           float alpha_ref,
                           const struct pipe_blend_color *blend_color,
                           struct ilo_cp *cp)
{
   const int state_align = 64 / 4;
   const int state_len = 6;
   uint32_t state_offset, *dw;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   dw = ilo_cp_steal_ptr(cp, "COLOR_CALC_STATE",
         state_len, state_align, &state_offset);

   dw[0] = stencil_ref->ref_value[0] << 24 |
           stencil_ref->ref_value[1] << 16 |
           BRW_ALPHATEST_FORMAT_UNORM8;
   dw[1] = float_to_ubyte(alpha_ref);
   dw[2] = fui(blend_color->color[0]);
   dw[3] = fui(blend_color->color[1]);
   dw[4] = fui(blend_color->color[2]);
   dw[5] = fui(blend_color->color[3]);

   return state_offset;
}

static int
gen6_blend_factor_dst_alpha_forced_one(int factor)
{
   switch (factor) {
   case BRW_BLENDFACTOR_DST_ALPHA:
      return BRW_BLENDFACTOR_ONE;
   case BRW_BLENDFACTOR_INV_DST_ALPHA:
   case BRW_BLENDFACTOR_SRC_ALPHA_SATURATE:
      return BRW_BLENDFACTOR_ZERO;
   default:
      return factor;
   }
}

static uint32_t
gen6_emit_BLEND_STATE(const struct ilo_dev_info *dev,
                      const struct pipe_blend_state *blend,
                      const struct pipe_framebuffer_state *framebuffer,
                      const struct pipe_alpha_state *alpha,
                      struct ilo_cp *cp)
{
   const int state_align = 64 / 4;
   int state_len;
   uint32_t state_offset, *dw;
   int num_targets, i;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 376:
    *
    *     "The blend state is stored as an array of up to 8 elements..."
    */
   num_targets = framebuffer->nr_cbufs;
   assert(num_targets <= 8);

   if (!num_targets) {
      if (!alpha->enabled)
         return 0;
      /* to be able to reference alpha func */
      num_targets = 1;
   }

   state_len = 2 * num_targets;

   dw = ilo_cp_steal_ptr(cp, "BLEND_STATE",
         state_len, state_align, &state_offset);

   for (i = 0; i < num_targets; i++) {
      const int target = (blend->independent_blend_enable) ? i : 0;
      const struct pipe_rt_blend_state *rt = &blend->rt[target];
      const int num_samples = (target < framebuffer->nr_cbufs) ?
         framebuffer->cbufs[target]->texture->nr_samples : 1;
      const struct util_format_description *format_desc =
         (target < framebuffer->nr_cbufs) ?
         util_format_description(framebuffer->cbufs[target]->format) : NULL;
      bool rt_is_unorm, rt_is_pure_integer, rt_dst_alpha_forced_one;

      rt_is_unorm = true;
      rt_is_pure_integer = false;
      rt_dst_alpha_forced_one = false;

      if (format_desc) {
         int ch;

         switch (format_desc->format) {
         case PIPE_FORMAT_B8G8R8X8_UNORM:
            /* force alpha to one when the HW format has alpha */
            assert(ilo_translate_render_format(PIPE_FORMAT_B8G8R8X8_UNORM)
                  == BRW_SURFACEFORMAT_B8G8R8A8_UNORM);
            rt_dst_alpha_forced_one = true;
            break;
         default:
            break;
         }

         for (ch = 0; ch < 4; ch++) {
            if (format_desc->channel[ch].type == UTIL_FORMAT_TYPE_VOID)
               continue;

            if (format_desc->channel[ch].pure_integer) {
               rt_is_unorm = false;
               rt_is_pure_integer = true;
               break;
            }

            if (!format_desc->channel[ch].normalized ||
                format_desc->channel[ch].type != UTIL_FORMAT_TYPE_UNSIGNED)
               rt_is_unorm = false;
         }
      }

      dw[0] = 0;
      dw[1] = BRW_RENDERTARGET_CLAMPRANGE_FORMAT << 2 | 0x3;

      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 365:
       *
       *     "* Color Buffer Blending and Logic Ops must not be enabled
       *        simultaneously, or behavior is UNDEFINED.
       *
       *      * Logic Ops are only supported on *_UNORM surfaces (excluding
       *        _SRGB variants), otherwise Logic Ops must be DISABLED."
       *
       * Since blend->logicop_enable takes precedence over rt->blend_enable,
       * and logicop is ignored for non-UNORM color buffers, no special care
       * is needed.
       */
      if (blend->logicop_enable) {
         if (rt_is_unorm) {
            dw[1] |= 1 << 22 |
                     gen6_translate_pipe_logicop(blend->logicop_func) << 18;
         }
      }
      else if (rt->blend_enable && !rt_is_pure_integer) {
         int rgb_src, rgb_dst, a_src, a_dst;

         rgb_src = gen6_translate_pipe_blendfactor(rt->rgb_src_factor);
         rgb_dst = gen6_translate_pipe_blendfactor(rt->rgb_dst_factor);
         a_src = gen6_translate_pipe_blendfactor(rt->alpha_src_factor);
         a_dst = gen6_translate_pipe_blendfactor(rt->alpha_dst_factor);

         if (rt_dst_alpha_forced_one) {
            rgb_src = gen6_blend_factor_dst_alpha_forced_one(rgb_src);
            rgb_dst = gen6_blend_factor_dst_alpha_forced_one(rgb_dst);
            a_src = gen6_blend_factor_dst_alpha_forced_one(a_src);
            a_dst = gen6_blend_factor_dst_alpha_forced_one(a_dst);
         }

         dw[0] |= 1 << 31 |
                  gen6_translate_pipe_blend(rt->alpha_func) << 26 |
                  a_src << 20 |
                  a_dst << 15 |
                  gen6_translate_pipe_blend(rt->rgb_func) << 11 |
                  rgb_src << 5 |
                  rgb_dst;

         if (rt->rgb_func != rt->alpha_func ||
             rgb_src != a_src ||
             rgb_dst != a_dst)
            dw[0] |= 1 << 30;
      }

      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 356:
       *
       *     "When NumSamples = 1, AlphaToCoverage and AlphaToCoverage
       *      Dither both must be disabled."
       *
       * There is no such limitation on GEN7, or for AlphaToOne.  But GL
       * requires that anyway.
       */
      if (num_samples > 1) {
         if (blend->alpha_to_coverage)
            dw[1] |= 1 << 31;

         if (blend->alpha_to_one) {
            const bool dual_blend =
               (!blend->logicop_enable && rt->blend_enable &&
                util_blend_state_is_dual(blend, target));

            /*
             * From the Sandy Bridge PRM, volume 2 part 1, page 378:
             *
             *     "If Dual Source Blending is enabled, this bit (AlphaToOne
             *      Enable) must be disabled."
             */
            if (!dual_blend)
               dw[1] |= 1 << 30;
         }

         if (dev->gen >= ILO_GEN(7))
            dw[1] |= 1 << 29;
      }

      if (!(rt->colormask & PIPE_MASK_A))
         dw[1] |= 1 << 27;
      if (!(rt->colormask & PIPE_MASK_R))
         dw[1] |= 1 << 26;
      if (!(rt->colormask & PIPE_MASK_G))
         dw[1] |= 1 << 25;
      if (!(rt->colormask & PIPE_MASK_B))
         dw[1] |= 1 << 24;

      /*
       * From the Sandy Bridge PRM, volume 2 part 1, page 382:
       *
       *     "Alpha Test can only be enabled if Pixel Shader outputs a float
       *      alpha value."
       */
      if (alpha->enabled && !rt_is_pure_integer) {
         dw[1] |= 1 << 16 |
                  gen6_translate_dsa_func(alpha->func) << 13;
      }

      if (blend->dither)
         dw[1] |= 1 << 12;

      dw += 2;
   }

   return state_offset;
}

static uint32_t
gen6_emit_DEPTH_STENCIL_STATE(const struct ilo_dev_info *dev,
                              const struct pipe_depth_stencil_alpha_state *dsa,
                              struct ilo_cp *cp)
{
   const int state_align = 64 / 4;
   const int state_len = 3;
   uint32_t state_offset, *dw;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   dw = ilo_cp_steal_ptr(cp, "DEPTH_STENCIL_STATE",
         state_len, state_align, &state_offset);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 359:
    *
    *     "If the Depth Buffer is either undefined or does not have a surface
    *      format of D32_FLOAT_S8X24_UINT or D24_UNORM_S8_UINT and separate
    *      stencil buffer is disabled, Stencil Test Enable must be DISABLED"
    *
    * From the Sandy Bridge PRM, volume 2 part 1, page 370:
    *
    *     "This field (Stencil Test Enable) cannot be enabled if
    *      Surface Format in 3DSTATE_DEPTH_BUFFER is set to D16_UNORM."
    *
    * TODO We do not check these yet.
    */
   if (dsa->stencil[0].enabled) {
      const struct pipe_stencil_state *stencil = &dsa->stencil[0];

      dw[0] = 1 << 31 |
              gen6_translate_dsa_func(stencil->func) << 28 |
              gen6_translate_pipe_stencil_op(stencil->fail_op) << 25 |
              gen6_translate_pipe_stencil_op(stencil->zfail_op) << 22 |
              gen6_translate_pipe_stencil_op(stencil->zpass_op) << 19;
      if (stencil->writemask)
         dw[0] |= 1 << 18;

      dw[1] = stencil->valuemask << 24 |
              stencil->writemask << 16;

      if (dsa->stencil[1].enabled) {
         stencil = &dsa->stencil[1];

         dw[0] |= 1 << 15 |
                  gen6_translate_dsa_func(stencil->func) << 12 |
                  gen6_translate_pipe_stencil_op(stencil->fail_op) << 9 |
                  gen6_translate_pipe_stencil_op(stencil->zfail_op) << 6 |
                  gen6_translate_pipe_stencil_op(stencil->zpass_op) << 3;
         if (stencil->writemask)
            dw[0] |= 1 << 18;

         dw[1] |= stencil->valuemask << 8 |
                  stencil->writemask;
      }
   }
   else {
      dw[0] = 0;
      dw[1] = 0;
   }

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 360:
    *
    *     "Enabling the Depth Test function without defining a Depth Buffer is
    *      UNDEFINED."
    *
    * From the Sandy Bridge PRM, volume 2 part 1, page 375:
    *
    *     "A Depth Buffer must be defined before enabling writes to it, or
    *      operation is UNDEFINED."
    *
    * TODO We do not check these yet.
    */
   dw[2] = dsa->depth.enabled << 31 |
           dsa->depth.writemask << 26;
   if (dsa->depth.enabled)
      dw[2] |= gen6_translate_dsa_func(dsa->depth.func) << 27;
   else
      dw[2] |= BRW_COMPAREFUNCTION_ALWAYS << 27;

   return state_offset;
}

static uint32_t
gen6_emit_SCISSOR_RECT(const struct ilo_dev_info *dev,
                       const struct pipe_scissor_state *scissors,
                       int num_scissors,
                       struct ilo_cp *cp)
{
   const int state_align = 32 / 4;
   const int state_len = 2 * num_scissors;
   uint32_t state_offset, *dw;
   int i;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   /*
    * From the Sandy Bridge PRM, volume 2 part 1, page 263:
    *
    *     "The viewport-specific state used by the SF unit (SCISSOR_RECT) is
    *      stored as an array of up to 16 elements..."
    */
   assert(num_scissors && num_scissors <= 16);

   dw = ilo_cp_steal_ptr(cp, "SCISSOR_RECT",
         state_len, state_align, &state_offset);

   for (i = 0; i < num_scissors; i++) {
      if (scissors[i].minx < scissors[i].maxx &&
          scissors[i].miny < scissors[i].maxy) {
         dw[0] = scissors[i].miny << 16 | scissors[i].minx;
         dw[1] = (scissors[i].maxy - 1) << 16 | (scissors[i].maxx - 1);
      }
      else {
         /* we have to make min greater than max as they are both inclusive */
         dw[0] = 1 << 16 | 1;
         dw[1] = 0;
      }

      dw += 2;
   }

   return state_offset;
}

static uint32_t
gen6_emit_BINDING_TABLE_STATE(const struct ilo_dev_info *dev,
                              uint32_t *surface_states,
                              int num_surface_states,
                              struct ilo_cp *cp)
{
   const int state_align = 32 / 4;
   const int state_len = num_surface_states;
   uint32_t state_offset, *dw;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   /*
    * From the Sandy Bridge PRM, volume 4 part 1, page 69:
    *
    *     "It is stored as an array of up to 256 elements..."
    */
   assert(num_surface_states <= 256);

   if (!num_surface_states)
      return 0;

   dw = ilo_cp_steal_ptr(cp, "BINDING_TABLE_STATE",
         state_len, state_align, &state_offset);
   memcpy(dw, surface_states,
         num_surface_states * sizeof(surface_states[0]));

   return state_offset;
}

static void
gen6_fill_null_SURFACE_STATE(const struct ilo_dev_info *dev,
                             unsigned width, unsigned height,
                             unsigned depth, unsigned lod,
                             uint32_t *dw, int num_dwords)
{
   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(num_dwords == 6);

   /*
    * From the Sandy Bridge PRM, volume 4 part 1, page 71:
    *
    *     "A null surface will be used in instances where an actual surface is
    *      not bound. When a write message is generated to a null surface, no
    *      actual surface is written to. When a read message (including any
    *      sampling engine message) is generated to a null surface, the result
    *      is all zeros. Note that a null surface type is allowed to be used
    *      with all messages, even if it is not specificially indicated as
    *      supported. All of the remaining fields in surface state are ignored
    *      for null surfaces, with the following exceptions:
    *
    *        * [DevSNB+]: Width, Height, Depth, and LOD fields must match the
    *          depth buffer's corresponding state for all render target
    *          surfaces, including null.
    *        * Surface Format must be R8G8B8A8_UNORM."
    *
    * From the Sandy Bridge PRM, volume 4 part 1, page 82:
    *
    *     "If Surface Type is SURFTYPE_NULL, this field (Tiled Surface) must be
    *      true"
    */

   dw[0] = BRW_SURFACE_NULL << BRW_SURFACE_TYPE_SHIFT |
           BRW_SURFACEFORMAT_B8G8R8A8_UNORM << BRW_SURFACE_FORMAT_SHIFT;

   dw[1] = 0;

   dw[2] = (height - 1) << BRW_SURFACE_HEIGHT_SHIFT |
           (width  - 1) << BRW_SURFACE_WIDTH_SHIFT |
           lod << BRW_SURFACE_LOD_SHIFT;

   dw[3] = (depth - 1) << BRW_SURFACE_DEPTH_SHIFT |
           BRW_SURFACE_TILED;

   dw[4] = 0;
   dw[5] = 0;
}

static void
gen6_fill_buffer_SURFACE_STATE(const struct ilo_dev_info *dev,
                               const struct ilo_resource *res,
                               unsigned offset, unsigned size,
                               unsigned struct_size,
                               enum pipe_format elem_format,
                               bool is_rt, bool render_cache_rw,
                               uint32_t *dw, int num_dwords)
{
   const int elem_size = util_format_get_blocksize(elem_format);
   int width, height, depth, pitch;
   int surface_format, num_entries;

   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(num_dwords == 6);

   /*
    * For SURFTYPE_BUFFER, a SURFACE_STATE specifies an element of a
    * structure in a buffer.
    */

   surface_format = ilo_translate_color_format(elem_format);

   num_entries = size / struct_size;
   /* see if there is enough space to fit another element */
   if (size % struct_size >= elem_size)
      num_entries++;

   /*
    * From the Sandy Bridge PRM, volume 4 part 1, page 76:
    *
    *     "For SURFTYPE_BUFFER render targets, this field (Surface Base
    *      Address) specifies the base address of first element of the
    *      surface. The surface is interpreted as a simple array of that
    *      single element type. The address must be naturally-aligned to the
    *      element size (e.g., a buffer containing R32G32B32A32_FLOAT elements
    *      must be 16-byte aligned).
    *
    *      For SURFTYPE_BUFFER non-rendertarget surfaces, this field specifies
    *      the base address of the first element of the surface, computed in
    *      software by adding the surface base address to the byte offset of
    *      the element in the buffer."
    */
   if (is_rt)
      assert(offset % elem_size == 0);

   /*
    * From the Sandy Bridge PRM, volume 4 part 1, page 77:
    *
    *     "For buffer surfaces, the number of entries in the buffer ranges
    *      from 1 to 2^27."
    */
   assert(num_entries >= 1 && num_entries <= 1 << 27);

   /*
    * From the Sandy Bridge PRM, volume 4 part 1, page 81:
    *
    *     "For surfaces of type SURFTYPE_BUFFER, this field (Surface Pitch)
    *      indicates the size of the structure."
    */
   pitch = struct_size;

   /*
    * From the Sandy Bridge PRM, volume 4 part 1, page 82:
    *
    *     "If Surface Type is SURFTYPE_BUFFER, this field (Tiled Surface) must
    *      be false (buffers are supported only in linear memory)"
    */
   assert(res->tiling == INTEL_TILING_NONE);

   pitch--;
   num_entries--;
   /* bits [6:0] */
   width  = (num_entries & 0x0000007f);
   /* bits [19:7] */
   height = (num_entries & 0x000fff80) >> 7;
   /* bits [26:20] */
   depth  = (num_entries & 0x07f00000) >> 20;

   dw[0] = BRW_SURFACE_BUFFER << BRW_SURFACE_TYPE_SHIFT |
           surface_format << BRW_SURFACE_FORMAT_SHIFT;
   if (render_cache_rw)
      dw[0] |= BRW_SURFACE_RC_READ_WRITE;

   dw[1] = offset;

   dw[2] = height << BRW_SURFACE_HEIGHT_SHIFT |
           width << BRW_SURFACE_WIDTH_SHIFT;

   dw[3] = depth << BRW_SURFACE_DEPTH_SHIFT |
           pitch << BRW_SURFACE_PITCH_SHIFT;

   dw[4] = 0;
   dw[5] = 0;
}

static void
gen6_fill_normal_SURFACE_STATE(const struct ilo_dev_info *dev,
                               struct ilo_resource *res,
                               enum pipe_format format,
                               unsigned first_level, unsigned num_levels,
                               unsigned first_layer, unsigned num_layers,
                               bool is_rt, bool render_cache_rw,
                               uint32_t *dw, int num_dwords)
{
   int surface_type, surface_format;
   int width, height, depth, pitch, lod;
   unsigned layer_offset, x_offset, y_offset;

   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(num_dwords == 6);

   surface_type = ilo_gpe_gen6_translate_texture(res->base.target);
   assert(surface_type != BRW_SURFACE_BUFFER);

   if (is_rt)
      surface_format = ilo_translate_render_format(format);
   else
      surface_format = ilo_translate_texture_format(format);
   assert(surface_format >= 0);

   width = res->base.width0;
   height = res->base.height0;
   pitch = res->bo_stride;

   switch (res->base.target) {
   case PIPE_TEXTURE_3D:
      depth = res->base.depth0;
      break;
   case PIPE_TEXTURE_CUBE:
   case PIPE_TEXTURE_CUBE_ARRAY:
      /*
       * From the Sandy Bridge PRM, volume 4 part 1, page 81:
       *
       *     "For SURFTYPE_CUBE: [DevSNB+]: for Sampling Engine Surfaces, the
       *      range of this field (Depth) is [0,84], indicating the number of
       *      cube array elements (equal to the number of underlying 2D array
       *      elements divided by 6). For other surfaces, this field must be
       *      zero."
       */
      if (!is_rt) {
         assert(num_layers % 6 == 0);
         depth = num_layers / 6;
         break;
      }
      assert(num_layers == 1);
      /* fall through */
   default:
      depth = num_layers;
      break;
   }

   /* sanity check the size */
   assert(width >= 1 && height >= 1 && depth >= 1 && pitch >= 1);
   switch (surface_type) {
   case BRW_SURFACE_1D:
      assert(width <= 8192 && height == 1 && depth <= 512);
      break;
   case BRW_SURFACE_2D:
      assert(width <= 8192 && height <= 8192 && depth <= 512);
      break;
   case BRW_SURFACE_3D:
      assert(width <= 2048 && height <= 2048 && depth <= 2048);
      break;
   case BRW_SURFACE_CUBE:
      assert(width <= 8192 && height <= 8192 && depth <= 85);
      assert(width == height);
      break;
   default:
      assert(!"unexpected surface type");
      break;
   }

   /* non-full array spacing is supported only on GEN7+ */
   assert(res->array_spacing_full);
   /* non-interleaved samples are supported only on GEN7+ */
   if (res->base.nr_samples > 1)
      assert(res->interleaved);

   /*
    * Compute the offset to the layer manually.
    *
    * For rendering, the hardware requires LOD to be the same for all render
    * targets and the depth buffer.  We need to compute the offset to the
    * layer manually and always set LOD to 0.
    */
   if (is_rt) {
      /* we lose the capability for layered rendering */
      assert(num_levels == 1 && num_layers == 1);

      layer_offset = ilo_resource_get_slice_offset(res,
            first_level, first_layer, true, &x_offset, &y_offset);

      assert(x_offset % 4 == 0);
      assert(y_offset % 2 == 0);
      x_offset /= 4;
      y_offset /= 2;

      /* derive the size for the LOD */
      width = u_minify(res->base.width0, first_level);
      height = u_minify(res->base.height0, first_level);
      if (surface_type == BRW_SURFACE_3D)
         depth = u_minify(res->base.depth0, first_level);

      first_level = 0;
      first_layer = 0;
      lod = 0;
   }
   else {
      layer_offset = 0;
      x_offset = 0;
      y_offset = 0;
      lod = num_levels - 1;
   }

   /*
    * From the Sandy Bridge PRM, volume 4 part 1, page 76:
    *
    *     "Linear render target surface base addresses must be element-size
    *      aligned, for non-YUV surface formats, or a multiple of 2
    *      element-sizes for YUV surface formats. Other linear surfaces have
    *      no alignment requirements (byte alignment is sufficient.)"
    *
    * From the Sandy Bridge PRM, volume 4 part 1, page 81:
    *
    *     "For linear render target surfaces, the pitch must be a multiple
    *      of the element size for non-YUV surface formats. Pitch must be a
    *      multiple of 2 * element size for YUV surface formats."
    *
    * From the Sandy Bridge PRM, volume 4 part 1, page 86:
    *
    *     "For linear surfaces, this field (X Offset) must be zero"
    */
   if (res->tiling == INTEL_TILING_NONE) {
      if (is_rt) {
         const int elem_size = util_format_get_blocksize(format);
         assert(layer_offset % elem_size == 0);
         assert(pitch % elem_size == 0);
      }

      assert(!x_offset);
   }

   dw[0] = surface_type << BRW_SURFACE_TYPE_SHIFT |
           surface_format << BRW_SURFACE_FORMAT_SHIFT |
           BRW_SURFACE_MIPMAPLAYOUT_BELOW << BRW_SURFACE_MIPLAYOUT_SHIFT;

   if (surface_type == BRW_SURFACE_CUBE && !is_rt) {
      dw[0] |= 1 << 9 |
               BRW_SURFACE_CUBEFACE_ENABLES;
   }

   if (render_cache_rw)
      dw[0] |= BRW_SURFACE_RC_READ_WRITE;

   dw[1] = layer_offset;

   dw[2] = (height - 1) << BRW_SURFACE_HEIGHT_SHIFT |
           (width - 1) << BRW_SURFACE_WIDTH_SHIFT |
           lod << BRW_SURFACE_LOD_SHIFT;

   dw[3] = (depth - 1) << BRW_SURFACE_DEPTH_SHIFT |
           (pitch - 1) << BRW_SURFACE_PITCH_SHIFT |
           ilo_gpe_gen6_translate_winsys_tiling(res->tiling);

   dw[4] = first_level << BRW_SURFACE_MIN_LOD_SHIFT |
           first_layer << 17 |
           (depth - 1) << 8 |
           ((res->base.nr_samples > 1) ? BRW_SURFACE_MULTISAMPLECOUNT_4 :
                                         BRW_SURFACE_MULTISAMPLECOUNT_1);

   dw[5] = x_offset << BRW_SURFACE_X_OFFSET_SHIFT |
           y_offset << BRW_SURFACE_Y_OFFSET_SHIFT;
   if (res->valign_4)
      dw[5] |= BRW_SURFACE_VERTICAL_ALIGN_ENABLE;
}

static uint32_t
gen6_emit_SURFACE_STATE(const struct ilo_dev_info *dev,
                        struct intel_bo *bo, bool for_render,
                        const uint32_t *dw, int num_dwords,
                        struct ilo_cp *cp)
{
   const int state_align = 32 / 4;
   const int state_len = 6;
   uint32_t state_offset;
   uint32_t read_domains, write_domain;

   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(num_dwords == state_len);

   if (for_render) {
      read_domains = INTEL_DOMAIN_RENDER;
      write_domain = INTEL_DOMAIN_RENDER;
   }
   else {
      read_domains = INTEL_DOMAIN_SAMPLER;
      write_domain = 0;
   }

   ilo_cp_steal(cp, "SURFACE_STATE", state_len, state_align, &state_offset);
   ilo_cp_write(cp, dw[0]);
   ilo_cp_write_bo(cp, dw[1], bo, read_domains, write_domain);
   ilo_cp_write(cp, dw[2]);
   ilo_cp_write(cp, dw[3]);
   ilo_cp_write(cp, dw[4]);
   ilo_cp_write(cp, dw[5]);
   ilo_cp_end(cp);

   return state_offset;
}

static uint32_t
gen6_emit_surf_SURFACE_STATE(const struct ilo_dev_info *dev,
                             const struct pipe_surface *surface,
                             struct ilo_cp *cp)
{
   struct intel_bo *bo;
   uint32_t dw[6];

   ILO_GPE_VALID_GEN(dev, 6, 6);

   if (surface && surface->texture) {
      struct ilo_resource *res = ilo_resource(surface->texture);

      bo = res->bo;

      /*
       * classic i965 sets render_cache_rw for constant buffers and sol
       * surfaces but not render buffers.  Why?
       */
      gen6_fill_normal_SURFACE_STATE(dev, res, surface->format,
            surface->u.tex.level, 1,
            surface->u.tex.first_layer,
            surface->u.tex.last_layer - surface->u.tex.first_layer + 1,
            true, true, dw, Elements(dw));
   }
   else {
      bo = NULL;
      gen6_fill_null_SURFACE_STATE(dev,
            surface->width, surface->height, 1, 0, dw, Elements(dw));
   }

   return gen6_emit_SURFACE_STATE(dev, bo, true, dw, Elements(dw), cp);
}

static uint32_t
gen6_emit_view_SURFACE_STATE(const struct ilo_dev_info *dev,
                             const struct pipe_sampler_view *view,
                             struct ilo_cp *cp)
{
   struct ilo_resource *res = ilo_resource(view->texture);
   uint32_t dw[6];

   ILO_GPE_VALID_GEN(dev, 6, 6);

   gen6_fill_normal_SURFACE_STATE(dev, res, view->format,
         view->u.tex.first_level,
         view->u.tex.last_level - view->u.tex.first_level + 1,
         view->u.tex.first_layer,
         view->u.tex.last_layer - view->u.tex.first_layer + 1,
         false, false, dw, Elements(dw));

   return gen6_emit_SURFACE_STATE(dev, res->bo, false, dw, Elements(dw), cp);
}

static uint32_t
gen6_emit_cbuf_SURFACE_STATE(const struct ilo_dev_info *dev,
                             const struct pipe_constant_buffer *cbuf,
                             struct ilo_cp *cp)
{
   const enum pipe_format elem_format = PIPE_FORMAT_R32G32B32A32_FLOAT;
   struct ilo_resource *res = ilo_resource(cbuf->buffer);
   uint32_t dw[6];

   ILO_GPE_VALID_GEN(dev, 6, 6);

   gen6_fill_buffer_SURFACE_STATE(dev, res,
         cbuf->buffer_offset, cbuf->buffer_size,
         util_format_get_blocksize(elem_format), elem_format,
         false, false, dw, Elements(dw));

   return gen6_emit_SURFACE_STATE(dev, res->bo, false, dw, Elements(dw), cp);
}

static uint32_t
gen6_emit_so_SURFACE_STATE(const struct ilo_dev_info *dev,
                           const struct pipe_stream_output_target *so,
                           const struct pipe_stream_output_info *so_info,
                           int so_index,
                           struct ilo_cp *cp)
{
   struct ilo_resource *res = ilo_resource(so->buffer);
   unsigned bo_offset, struct_size;
   enum pipe_format elem_format;
   uint32_t dw[6];

   ILO_GPE_VALID_GEN(dev, 6, 6);

   bo_offset = so->buffer_offset + so_info->output[so_index].dst_offset * 4;
   struct_size = so_info->stride[so_info->output[so_index].output_buffer] * 4;

   switch (so_info->output[so_index].num_components) {
   case 1:
      elem_format = PIPE_FORMAT_R32_FLOAT;
      break;
   case 2:
      elem_format = PIPE_FORMAT_R32G32_FLOAT;
      break;
   case 3:
      elem_format = PIPE_FORMAT_R32G32B32_FLOAT;
      break;
   case 4:
      elem_format = PIPE_FORMAT_R32G32B32A32_FLOAT;
      break;
   default:
      assert(!"unexpected SO components length");
      elem_format = PIPE_FORMAT_R32_FLOAT;
      break;
   }

   gen6_fill_buffer_SURFACE_STATE(dev, res, bo_offset, so->buffer_size,
         struct_size, elem_format, false, true, dw, Elements(dw));

   return gen6_emit_SURFACE_STATE(dev, res->bo, false, dw, Elements(dw), cp);
}

static uint32_t
gen6_emit_SAMPLER_STATE(const struct ilo_dev_info *dev,
                        const struct pipe_sampler_state **samplers,
                        const struct pipe_sampler_view **sampler_views,
                        const uint32_t *sampler_border_colors,
                        int num_samplers,
                        struct ilo_cp *cp)
{
   const int state_align = 32 / 4;
   const int state_len = 4 * num_samplers;
   uint32_t state_offset, *dw;
   int i;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   /*
    * From the Sandy Bridge PRM, volume 4 part 1, page 101:
    *
    *     "The sampler state is stored as an array of up to 16 elements..."
    */
   assert(num_samplers <= 16);

   if (!num_samplers)
      return 0;

   dw = ilo_cp_steal_ptr(cp, "SAMPLER_STATE",
         state_len, state_align, &state_offset);

   for (i = 0; i < num_samplers; i++) {
      const struct pipe_sampler_state *sampler = samplers[i];
      const struct pipe_sampler_view *view = sampler_views[i];
      const uint32_t border_color = sampler_border_colors[i];
      enum pipe_texture_target target;
      int mip_filter, min_filter, mag_filter, max_aniso;
      int lod_bias, max_lod, min_lod, base_level;
      int wrap_s, wrap_t, wrap_r;
      bool clamp_to_edge;

      /* there may be holes */
      if (!sampler || !view) {
         /* disabled sampler */
         dw[0] = 1 << 31;
         dw[1] = 0;
         dw[2] = 0;
         dw[3] = 0;
         dw += 4;

         continue;
      }

      target = view->texture->target;

      /* determine mip/min/mag filters */
      mip_filter = gen6_translate_tex_mipfilter(sampler->min_mip_filter);

      /*
       * From the Sandy Bridge PRM, volume 4 part 1, page 103:
       *
       *     "Only MAPFILTER_NEAREST and MAPFILTER_LINEAR are supported for
       *      surfaces of type SURFTYPE_3D."
       */
      if (sampler->max_anisotropy && target != PIPE_TEXTURE_3D) {
         min_filter = BRW_MAPFILTER_ANISOTROPIC;
         mag_filter = BRW_MAPFILTER_ANISOTROPIC;

         if (sampler->max_anisotropy >= 2 && sampler->max_anisotropy <= 16)
            max_aniso = sampler->max_anisotropy / 2 - 1;
         else if (sampler->max_anisotropy > 16)
            max_aniso = BRW_ANISORATIO_16;
         else
            max_aniso = BRW_ANISORATIO_2;
      }
      else {
         min_filter = gen6_translate_tex_filter(sampler->min_img_filter);
         mag_filter = gen6_translate_tex_filter(sampler->mag_img_filter);

         /* ignored */
         max_aniso = 0;
      }

      /*
       * For nearest filtering, PIPE_TEX_WRAP_CLAMP means
       * PIPE_TEX_WRAP_CLAMP_TO_EDGE;  for linear filtering,
       * PIPE_TEX_WRAP_CLAMP means PIPE_TEX_WRAP_CLAMP_TO_BORDER while
       * additionally clamping the texture coordinates to [0.0, 1.0].
       *
       * The clamping is taken care of in the shaders.  There are two filters
       * here, but let the minification one has a say.
       */
      clamp_to_edge = (sampler->min_img_filter == PIPE_TEX_FILTER_NEAREST);

      switch (target) {
      case PIPE_TEXTURE_CUBE:
         /*
          * From the Sandy Bridge PRM, volume 4 part 1, page 107:
          *
          *     "When using cube map texture coordinates, only
          *      TEXCOORDMODE_CLAMP and TEXCOORDMODE_CUBE settings are valid,
          *      and each TC component must have the same Address Control
          *      mode."
          *
          * From the Ivy Bridge PRM, volume 4 part 1, page 96:
          *
          *     "This field (Cube Surface Control Mode) must be set to
          *      CUBECTRLMODE_PROGRAMMED"
          *
          * Therefore, we cannot use "Cube Surface Control Mode" for semless
          * cube map filtering.
          */
         if (sampler->seamless_cube_map &&
             (sampler->min_img_filter != PIPE_TEX_FILTER_NEAREST ||
              sampler->mag_img_filter != PIPE_TEX_FILTER_NEAREST)) {
            wrap_s = BRW_TEXCOORDMODE_CUBE;
            wrap_t = BRW_TEXCOORDMODE_CUBE;
            wrap_r = BRW_TEXCOORDMODE_CUBE;
         }
         else {
            wrap_s = BRW_TEXCOORDMODE_CLAMP;
            wrap_t = BRW_TEXCOORDMODE_CLAMP;
            wrap_r = BRW_TEXCOORDMODE_CLAMP;
         }
         break;
      case PIPE_TEXTURE_1D:
         wrap_s = gen6_translate_tex_wrap(sampler->wrap_s, clamp_to_edge);
         /*
          * as noted in the classic i965 driver, the HW may look at these
          * values so we need to set them to a safe mode
          */
         wrap_t = BRW_TEXCOORDMODE_WRAP;
         wrap_r = BRW_TEXCOORDMODE_WRAP;
         break;
      default:
         wrap_s = gen6_translate_tex_wrap(sampler->wrap_s, clamp_to_edge);
         wrap_t = gen6_translate_tex_wrap(sampler->wrap_t, clamp_to_edge);
         wrap_r = gen6_translate_tex_wrap(sampler->wrap_r, clamp_to_edge);
         break;
      }

      /*
       * Here is how the hardware calculate per-pixel LOD, from my reading of
       * the PRMs:
       *
       *  1) LOD is set to log2(ratio of texels to pixels) if not specified in
       *     other ways.  The number of texels is measured using level
       *     SurfMinLod.
       *  2) Bias is added to LOD.
       *  3) LOD is clamped to [MinLod, MaxLod], and the clamped value is
       *     compared with Base to determine whether magnification or
       *     minification is needed.
       *     (if preclamp is disabled, LOD is compared with Base before
       *      clamping)
       *  4) If magnification is needed, or no mipmapping is requested, LOD is
       *     set to floor(MinLod).
       *  5) LOD is clamped to [0, MIPCnt], and SurfMinLod is added to LOD.
       *
       * With Gallium interface, Base is always zero and view->u.tex.first_level
       * specifies SurfMinLod.
       *
       * From the Sandy Bridge PRM, volume 4 part 1, page 21:
       *
       *     "[DevSNB] Errata: Incorrect behavior is observed in cases where
       *      the min and mag mode filters are different and SurfMinLOD is
       *      nonzero. The determination of MagMode uses the following equation
       *      instead of the one in the above pseudocode: MagMode = (LOD +
       *      SurfMinLOD - Base <= 0)"
       *
       * As a way to work around that, we set Base to view->u.tex.first_level
       * on GEN6.
       */
      if (dev->gen >= ILO_GEN(7)) {
         const float scale = 256.0f;

         /* [-16.0, 16.0) in S4.8 */
         lod_bias = (int)
            (CLAMP(sampler->lod_bias, -16.0f, 15.9f) * scale);
         lod_bias &= 0x1fff;

         base_level = 0;

         /* [0.0, 14.0] in U4.8 */
         max_lod = (int) (CLAMP(sampler->max_lod, 0.0f, 14.0f) * scale);
         min_lod = (int) (CLAMP(sampler->min_lod, 0.0f, 14.0f) * scale);
      }
      else {
         const float scale = 64.0f;

         /* [-16.0, 16.0) in S4.6 */
         lod_bias = (int)
            (CLAMP(sampler->lod_bias, -16.0f, 15.9f) * scale);
         lod_bias &= 0x7ff;

         base_level = view->u.tex.first_level;

         /* [0.0, 13.0] in U4.6 */
         max_lod = (int) (CLAMP(sampler->max_lod, 0.0f, 13.0f) * scale);
         min_lod = (int) (CLAMP(sampler->min_lod, 0.0f, 13.0f) * scale);
      }

      /*
       * We want LOD to be clamped to determine magnification/minification,
       * and get set to zero when it is magnification or when mipmapping is
       * disabled.  The hardware would set LOD to floor(MinLod) and that is a
       * problem when MinLod is greater than or equal to 1.0f.
       *
       * We know that with Base being zero, it is always minification when
       * MinLod is non-zero.  To meet our need, we just need to set MinLod to
       * zero and set MagFilter to MinFilter when mipmapping is disabled.
       */
      if (sampler->min_mip_filter == PIPE_TEX_MIPFILTER_NONE && min_lod) {
         min_lod = 0;
         mag_filter = min_filter;
      }

      if (!sampler->normalized_coords) {
         /* work around a bug in util_blitter */
         mip_filter = BRW_MIPFILTER_NONE;

         /*
          * From the Ivy Bridge PRM, volume 4 part 1, page 98:
          *
          *     "The following state must be set as indicated if this field
          *      (Non-normalized Coordinate Enable) is enabled:
          *
          *      - TCX/Y/Z Address Control Mode must be TEXCOORDMODE_CLAMP,
          *        TEXCOORDMODE_HALF_BORDER, or TEXCOORDMODE_CLAMP_BORDER.
          *      - Surface Type must be SURFTYPE_2D or SURFTYPE_3D.
          *      - Mag Mode Filter must be MAPFILTER_NEAREST or
          *        MAPFILTER_LINEAR.
          *      - Min Mode Filter must be MAPFILTER_NEAREST or
          *        MAPFILTER_LINEAR.
          *      - Mip Mode Filter must be MIPFILTER_NONE.
          *      - Min LOD must be 0.
          *      - Max LOD must be 0.
          *      - MIP Count must be 0.
          *      - Surface Min LOD must be 0.
          *      - Texture LOD Bias must be 0."
          */
         assert(wrap_s == BRW_TEXCOORDMODE_CLAMP ||
                wrap_s == BRW_TEXCOORDMODE_CLAMP_BORDER);
         assert(wrap_t == BRW_TEXCOORDMODE_CLAMP ||
                wrap_t == BRW_TEXCOORDMODE_CLAMP_BORDER);
         assert(wrap_r == BRW_TEXCOORDMODE_CLAMP ||
                wrap_r == BRW_TEXCOORDMODE_CLAMP_BORDER);

         assert(target == PIPE_TEXTURE_RECT);

         assert(mag_filter == BRW_MAPFILTER_NEAREST ||
                mag_filter == BRW_MAPFILTER_LINEAR);
         assert(min_filter == BRW_MAPFILTER_NEAREST ||
                min_filter == BRW_MAPFILTER_LINEAR);
         assert(mip_filter == BRW_MIPFILTER_NONE);
      }

      if (dev->gen >= ILO_GEN(7)) {
         dw[0] = 1 << 28 |
                 base_level << 22 |
                 mip_filter << 20 |
                 mag_filter << 17 |
                 min_filter << 14 |
                 lod_bias << 1;

         /* enable EWA filtering unconditionally breaks some piglit tests */
         if (sampler->max_anisotropy)
            dw[0] |= 1;

         dw[1] = min_lod << 20 |
                 max_lod << 8;

         if (sampler->compare_mode != PIPE_TEX_COMPARE_NONE)
            dw[1] |= gen6_translate_shadow_func(sampler->compare_func) << 1;

         assert(!(border_color & 0x1f));
         dw[2] = border_color;

         dw[3] = max_aniso << 19 |
                 wrap_s << 6 |
                 wrap_t << 3 |
                 wrap_r;

         /* round the coordinates for linear filtering */
         if (min_filter != BRW_MAPFILTER_NEAREST) {
            dw[3] |= (BRW_ADDRESS_ROUNDING_ENABLE_U_MIN |
                      BRW_ADDRESS_ROUNDING_ENABLE_V_MIN |
                      BRW_ADDRESS_ROUNDING_ENABLE_R_MIN) << 13;
         }
         if (mag_filter != BRW_MAPFILTER_NEAREST) {
            dw[3] |= (BRW_ADDRESS_ROUNDING_ENABLE_U_MAG |
                      BRW_ADDRESS_ROUNDING_ENABLE_V_MAG |
                      BRW_ADDRESS_ROUNDING_ENABLE_R_MAG) << 13;
         }

         if (!sampler->normalized_coords)
            dw[3] |= 1 << 10;
      }
      else {
         dw[0] = 1 << 28 |
                 (min_filter != mag_filter) << 27 |
                 base_level << 22 |
                 mip_filter << 20 |
                 mag_filter << 17 |
                 min_filter << 14 |
                 lod_bias << 3;

         if (sampler->compare_mode != PIPE_TEX_COMPARE_NONE)
            dw[0] |= gen6_translate_shadow_func(sampler->compare_func);

         dw[1] = min_lod << 22 |
                 max_lod << 12 |
                 wrap_s << 6 |
                 wrap_t << 3 |
                 wrap_r;

         assert(!(border_color & 0x1f));
         dw[2] = border_color;

         dw[3] = max_aniso << 19;

         /* round the coordinates for linear filtering */
         if (min_filter != BRW_MAPFILTER_NEAREST) {
            dw[3] |= (BRW_ADDRESS_ROUNDING_ENABLE_U_MIN |
                      BRW_ADDRESS_ROUNDING_ENABLE_V_MIN |
                      BRW_ADDRESS_ROUNDING_ENABLE_R_MIN) << 13;
         }
         if (mag_filter != BRW_MAPFILTER_NEAREST) {
            dw[3] |= (BRW_ADDRESS_ROUNDING_ENABLE_U_MAG |
                      BRW_ADDRESS_ROUNDING_ENABLE_V_MAG |
                      BRW_ADDRESS_ROUNDING_ENABLE_R_MAG) << 13;
         }

         if (!sampler->normalized_coords)
            dw[3] |= 1;
      }

      dw += 4;
   }

   return state_offset;
}

static uint32_t
gen6_emit_SAMPLER_BORDER_COLOR_STATE(const struct ilo_dev_info *dev,
                                     const union pipe_color_union *color,
                                     struct ilo_cp *cp)
{
   const int state_align = 32 / 4;
   const int state_len = 12;
   uint32_t state_offset, *dw;
   float rgba[4] = {
      color->f[0], color->f[1], color->f[2], color->f[3],
   };

   ILO_GPE_VALID_GEN(dev, 6, 6);

   dw = ilo_cp_steal_ptr(cp, "SAMPLER_BORDER_COLOR_STATE",
         state_len, state_align, &state_offset);

   /*
    * This state is not documented in the Sandy Bridge PRM, but in the
    * Ironlake PRM.  SNORM8 seems to be in DW11 instead of DW1.
    */

   /* IEEE_FP */
   dw[1] = fui(rgba[0]);
   dw[2] = fui(rgba[1]);
   dw[3] = fui(rgba[2]);
   dw[4] = fui(rgba[3]);

   /* FLOAT_16 */
   dw[5] = util_float_to_half(rgba[0]) |
           util_float_to_half(rgba[1]) << 16;
   dw[6] = util_float_to_half(rgba[2]) |
           util_float_to_half(rgba[3]) << 16;

   /* clamp to [-1.0f, 1.0f] */
   rgba[0] = CLAMP(rgba[0], -1.0f, 1.0f);
   rgba[1] = CLAMP(rgba[1], -1.0f, 1.0f);
   rgba[2] = CLAMP(rgba[2], -1.0f, 1.0f);
   rgba[3] = CLAMP(rgba[3], -1.0f, 1.0f);

   /* SNORM16 */
   dw[9] =  (int16_t) util_iround(rgba[0] * 32767.0f) |
            (int16_t) util_iround(rgba[1] * 32767.0f) << 16;
   dw[10] = (int16_t) util_iround(rgba[2] * 32767.0f) |
            (int16_t) util_iround(rgba[3] * 32767.0f) << 16;

   /* SNORM8 */
   dw[11] = (int8_t) util_iround(rgba[0] * 127.0f) |
            (int8_t) util_iround(rgba[1] * 127.0f) << 8 |
            (int8_t) util_iround(rgba[2] * 127.0f) << 16 |
            (int8_t) util_iround(rgba[3] * 127.0f) << 24;

   /* clamp to [0.0f, 1.0f] */
   rgba[0] = CLAMP(rgba[0], 0.0f, 1.0f);
   rgba[1] = CLAMP(rgba[1], 0.0f, 1.0f);
   rgba[2] = CLAMP(rgba[2], 0.0f, 1.0f);
   rgba[3] = CLAMP(rgba[3], 0.0f, 1.0f);

   /* UNORM8 */
   dw[0] = (uint8_t) util_iround(rgba[0] * 255.0f) |
           (uint8_t) util_iround(rgba[1] * 255.0f) << 8 |
           (uint8_t) util_iround(rgba[2] * 255.0f) << 16 |
           (uint8_t) util_iround(rgba[3] * 255.0f) << 24;

   /* UNORM16 */
   dw[7] = (uint16_t) util_iround(rgba[0] * 65535.0f) |
           (uint16_t) util_iround(rgba[1] * 65535.0f) << 16;
   dw[8] = (uint16_t) util_iround(rgba[2] * 65535.0f) |
           (uint16_t) util_iround(rgba[3] * 65535.0f) << 16;

   return state_offset;
}

static uint32_t
gen6_emit_push_constant_buffer(const struct ilo_dev_info *dev,
                               int size, void **pcb,
                               struct ilo_cp *cp)
{
   /*
    * For all VS, GS, FS, and CS push constant buffers, they must be aligned
    * to 32 bytes, and their sizes are specified in 256-bit units.
    */
   const int state_align = 32 / 4;
   const int state_len = align(size, 32) / 4;
   uint32_t state_offset;
   char *buf;

   ILO_GPE_VALID_GEN(dev, 6, 7);

   buf = ilo_cp_steal_ptr(cp, "PUSH_CONSTANT_BUFFER",
         state_len, state_align, &state_offset);

   /* zero out the unused range */
   if (size < state_len * 4)
      memset(&buf[size], 0, state_len * 4 - size);

   if (pcb)
      *pcb = buf;

   return state_offset;
}

static int
gen6_estimate_command_size(const struct ilo_dev_info *dev,
                           enum ilo_gpe_gen6_command cmd,
                           int arg)
{
   static const struct {
      int header;
      int body;
   } gen6_command_size_table[ILO_GPE_GEN6_COMMAND_COUNT] = {
      [ILO_GPE_GEN6_STATE_BASE_ADDRESS]                       = { 0,  10 },
      [ILO_GPE_GEN6_STATE_SIP]                                = { 0,  2  },
      [ILO_GPE_GEN6_3DSTATE_VF_STATISTICS]                    = { 0,  1  },
      [ILO_GPE_GEN6_PIPELINE_SELECT]                          = { 0,  1  },
      [ILO_GPE_GEN6_MEDIA_VFE_STATE]                          = { 0,  8  },
      [ILO_GPE_GEN6_MEDIA_CURBE_LOAD]                         = { 0,  4  },
      [ILO_GPE_GEN6_MEDIA_INTERFACE_DESCRIPTOR_LOAD]          = { 0,  4  },
      [ILO_GPE_GEN6_MEDIA_GATEWAY_STATE]                      = { 0,  2  },
      [ILO_GPE_GEN6_MEDIA_STATE_FLUSH]                        = { 0,  2  },
      [ILO_GPE_GEN6_MEDIA_OBJECT_WALKER]                      = { 17, 1  },
      [ILO_GPE_GEN6_3DSTATE_BINDING_TABLE_POINTERS]           = { 0,  4  },
      [ILO_GPE_GEN6_3DSTATE_SAMPLER_STATE_POINTERS]           = { 0,  4  },
      [ILO_GPE_GEN6_3DSTATE_URB]                              = { 0,  3  },
      [ILO_GPE_GEN6_3DSTATE_VERTEX_BUFFERS]                   = { 1,  4  },
      [ILO_GPE_GEN6_3DSTATE_VERTEX_ELEMENTS]                  = { 1,  2  },
      [ILO_GPE_GEN6_3DSTATE_INDEX_BUFFER]                     = { 0,  3  },
      [ILO_GPE_GEN6_3DSTATE_VIEWPORT_STATE_POINTERS]          = { 0,  4  },
      [ILO_GPE_GEN6_3DSTATE_CC_STATE_POINTERS]                = { 0,  4  },
      [ILO_GPE_GEN6_3DSTATE_SCISSOR_STATE_POINTERS]           = { 0,  2  },
      [ILO_GPE_GEN6_3DSTATE_VS]                               = { 0,  6  },
      [ILO_GPE_GEN6_3DSTATE_GS]                               = { 0,  7  },
      [ILO_GPE_GEN6_3DSTATE_CLIP]                             = { 0,  4  },
      [ILO_GPE_GEN6_3DSTATE_SF]                               = { 0,  20 },
      [ILO_GPE_GEN6_3DSTATE_WM]                               = { 0,  9  },
      [ILO_GPE_GEN6_3DSTATE_CONSTANT_VS]                      = { 0,  5  },
      [ILO_GPE_GEN6_3DSTATE_CONSTANT_GS]                      = { 0,  5  },
      [ILO_GPE_GEN6_3DSTATE_CONSTANT_PS]                      = { 0,  5  },
      [ILO_GPE_GEN6_3DSTATE_SAMPLE_MASK]                      = { 0,  2  },
      [ILO_GPE_GEN6_3DSTATE_DRAWING_RECTANGLE]                = { 0,  4  },
      [ILO_GPE_GEN6_3DSTATE_DEPTH_BUFFER]                     = { 0,  7  },
      [ILO_GPE_GEN6_3DSTATE_POLY_STIPPLE_OFFSET]              = { 0,  2  },
      [ILO_GPE_GEN6_3DSTATE_POLY_STIPPLE_PATTERN]             = { 0,  33 },
      [ILO_GPE_GEN6_3DSTATE_LINE_STIPPLE]                     = { 0,  3  },
      [ILO_GPE_GEN6_3DSTATE_AA_LINE_PARAMETERS]               = { 0,  3  },
      [ILO_GPE_GEN6_3DSTATE_GS_SVB_INDEX]                     = { 0,  4  },
      [ILO_GPE_GEN6_3DSTATE_MULTISAMPLE]                      = { 0,  3  },
      [ILO_GPE_GEN6_3DSTATE_STENCIL_BUFFER]                   = { 0,  3  },
      [ILO_GPE_GEN6_3DSTATE_HIER_DEPTH_BUFFER]                = { 0,  3  },
      [ILO_GPE_GEN6_3DSTATE_CLEAR_PARAMS]                     = { 0,  2  },
      [ILO_GPE_GEN6_PIPE_CONTROL]                             = { 0,  5  },
      [ILO_GPE_GEN6_3DPRIMITIVE]                              = { 0,  6  },
   };
   const int header = gen6_command_size_table[cmd].header;
   const int body = gen6_command_size_table[arg].body;
   const int count = arg;

   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(cmd < ILO_GPE_GEN6_COMMAND_COUNT);

   return (likely(count)) ? header + body * count : 0;
}

static int
gen6_estimate_state_size(const struct ilo_dev_info *dev,
                         enum ilo_gpe_gen6_state state,
                         int arg)
{
   static const struct {
      int alignment;
      int body;
      bool is_array;
   } gen6_state_size_table[ILO_GPE_GEN6_STATE_COUNT] = {
      [ILO_GPE_GEN6_INTERFACE_DESCRIPTOR_DATA]          = { 8,  8,  true },
      [ILO_GPE_GEN6_SF_VIEWPORT]                        = { 8,  8,  true },
      [ILO_GPE_GEN6_CLIP_VIEWPORT]                      = { 8,  4,  true },
      [ILO_GPE_GEN6_CC_VIEWPORT]                        = { 8,  2,  true },
      [ILO_GPE_GEN6_COLOR_CALC_STATE]                   = { 16, 6,  false },
      [ILO_GPE_GEN6_BLEND_STATE]                        = { 16, 2,  true },
      [ILO_GPE_GEN6_DEPTH_STENCIL_STATE]                = { 16, 3,  false },
      [ILO_GPE_GEN6_SCISSOR_RECT]                       = { 8,  2,  true },
      [ILO_GPE_GEN6_BINDING_TABLE_STATE]                = { 8,  1,  true },
      [ILO_GPE_GEN6_SURFACE_STATE]                      = { 8,  6,  false },
      [ILO_GPE_GEN6_SAMPLER_STATE]                      = { 8,  4,  true },
      [ILO_GPE_GEN6_SAMPLER_BORDER_COLOR_STATE]         = { 8,  12, false },
      [ILO_GPE_GEN6_PUSH_CONSTANT_BUFFER]               = { 8,  1,  true },
   };
   const int alignment = gen6_state_size_table[state].alignment;
   const int body = gen6_state_size_table[state].body;
   const bool is_array = gen6_state_size_table[state].is_array;
   const int count = arg;
   int estimate;

   ILO_GPE_VALID_GEN(dev, 6, 6);
   assert(state < ILO_GPE_GEN6_STATE_COUNT);

   if (likely(count)) {
      if (is_array) {
         estimate = (alignment - 1) + body * count;
      }
      else {
         estimate = (alignment - 1) + body;
         /* all states are aligned */
         if (count > 1)
            estimate += util_align_npot(body, alignment) * (count - 1);
      }
   }
   else {
      estimate = 0;
   }

   return estimate;
}

static const struct ilo_gpe_gen6 gen6_gpe = {
   .estimate_command_size = gen6_estimate_command_size,
   .estimate_state_size = gen6_estimate_state_size,

#define GEN6_SET(name) .emit_ ## name = gen6_emit_ ## name
   GEN6_SET(STATE_BASE_ADDRESS),
   GEN6_SET(STATE_SIP),
   GEN6_SET(3DSTATE_VF_STATISTICS),
   GEN6_SET(PIPELINE_SELECT),
   GEN6_SET(MEDIA_VFE_STATE),
   GEN6_SET(MEDIA_CURBE_LOAD),
   GEN6_SET(MEDIA_INTERFACE_DESCRIPTOR_LOAD),
   GEN6_SET(MEDIA_GATEWAY_STATE),
   GEN6_SET(MEDIA_STATE_FLUSH),
   GEN6_SET(MEDIA_OBJECT_WALKER),
   GEN6_SET(3DSTATE_BINDING_TABLE_POINTERS),
   GEN6_SET(3DSTATE_SAMPLER_STATE_POINTERS),
   GEN6_SET(3DSTATE_URB),
   GEN6_SET(3DSTATE_VERTEX_BUFFERS),
   GEN6_SET(3DSTATE_VERTEX_ELEMENTS),
   GEN6_SET(3DSTATE_INDEX_BUFFER),
   GEN6_SET(3DSTATE_VIEWPORT_STATE_POINTERS),
   GEN6_SET(3DSTATE_CC_STATE_POINTERS),
   GEN6_SET(3DSTATE_SCISSOR_STATE_POINTERS),
   GEN6_SET(3DSTATE_VS),
   GEN6_SET(3DSTATE_GS),
   GEN6_SET(3DSTATE_CLIP),
   GEN6_SET(3DSTATE_SF),
   GEN6_SET(3DSTATE_WM),
   GEN6_SET(3DSTATE_CONSTANT_VS),
   GEN6_SET(3DSTATE_CONSTANT_GS),
   GEN6_SET(3DSTATE_CONSTANT_PS),
   GEN6_SET(3DSTATE_SAMPLE_MASK),
   GEN6_SET(3DSTATE_DRAWING_RECTANGLE),
   GEN6_SET(3DSTATE_DEPTH_BUFFER),
   GEN6_SET(3DSTATE_POLY_STIPPLE_OFFSET),
   GEN6_SET(3DSTATE_POLY_STIPPLE_PATTERN),
   GEN6_SET(3DSTATE_LINE_STIPPLE),
   GEN6_SET(3DSTATE_AA_LINE_PARAMETERS),
   GEN6_SET(3DSTATE_GS_SVB_INDEX),
   GEN6_SET(3DSTATE_MULTISAMPLE),
   GEN6_SET(3DSTATE_STENCIL_BUFFER),
   GEN6_SET(3DSTATE_HIER_DEPTH_BUFFER),
   GEN6_SET(3DSTATE_CLEAR_PARAMS),
   GEN6_SET(PIPE_CONTROL),
   GEN6_SET(3DPRIMITIVE),
   GEN6_SET(INTERFACE_DESCRIPTOR_DATA),
   GEN6_SET(SF_VIEWPORT),
   GEN6_SET(CLIP_VIEWPORT),
   GEN6_SET(CC_VIEWPORT),
   GEN6_SET(COLOR_CALC_STATE),
   GEN6_SET(BLEND_STATE),
   GEN6_SET(DEPTH_STENCIL_STATE),
   GEN6_SET(SCISSOR_RECT),
   GEN6_SET(BINDING_TABLE_STATE),
   GEN6_SET(surf_SURFACE_STATE),
   GEN6_SET(view_SURFACE_STATE),
   GEN6_SET(cbuf_SURFACE_STATE),
   GEN6_SET(so_SURFACE_STATE),
   GEN6_SET(SAMPLER_STATE),
   GEN6_SET(SAMPLER_BORDER_COLOR_STATE),
   GEN6_SET(push_constant_buffer),
#undef GEN6_SET
};

const struct ilo_gpe_gen6 *
ilo_gpe_gen6_get(void)
{
   return &gen6_gpe;
}