path: root/src/gallium/docs/d3d11ddi.txt

This document compares the D3D10/D3D11 device driver interface with Gallium.
It is written from the perspective of a developer implementing a D3D10/D3D11 driver as a Gallium state tracker.

Note that naming and other cosmetic differences are not noted, since they don't really matter and would severely clutter the document.
Gallium/OpenGL terminology is used in preference to D3D terminology.

NOTE: this document tries to be complete but most likely isn't fully complete and also not fully correct: please submit patches if you spot anything incorrect

Also note that this is specifically for the DirectX 10/11 Windows Vista/7 DDI interfaces.
DirectX 9 has both user-mode (for Vista) and kernel mode (pre-Vista) interfaces, but they are significantly different from Gallium due to the presence of a lot of fixed function functionality.

The user-visible DirectX 10/11 interfaces are distinct from the kernel DDI, but they match very closely.

* Accessing Microsoft documentation

See http://msdn.microsoft.com/en-us/library/dd445501.aspx ("D3D11DDI_DEVICEFUNCS") for D3D documentation.

Also see http://download.microsoft.com/download/f/2/d/f2d5ee2c-b7ba-4cd0-9686-b6508b5479a1/direct3d10_web.pdf ("The Direct3D 10 System" by David Blythe) for an introduction to Direct3D 10 and the rationale for its design.

The Windows Driver Kit contains the actual headers, as well as shader bytecode documentation.

To get the headers from Linux, run the following, in a dedicated directory:
wget http://download.microsoft.com/download/4/A/2/4A25C7D5-EFBE-4182-B6A9-AE6850409A78/GRMWDK_EN_7600_1.ISO
sudo mount -o loop GRMWDK_EN_7600_1.ISO /mnt/tmp
cabextract -x /mnt/tmp/wdk/headers_cab001.cab
rename 's/^_(.*)_[0-9]*$/$1/' *
sudo umount /mnt/tmp

d3d10umddi.h contains the DDI interface analyzed in this document: note that it is much easier to read this online on MSDN.
d3d{10,11}TokenizedProgramFormat.hpp contains the shader bytecode definitions: this is not available on MSDN.
d3d9types.h contains DX9 shader bytecode, and DX9 types
d3dumddi.h contains the DirectX 9 DDI interface

* Glossary

BC1: DXT1
BC2: DXT3
BC3: DXT5
BC5: RGTC
BC6H: BPTC float
BC7: BPTC
CS = compute shader: OpenCL-like shader
DS = domain shader: tessellation evaluation shader
HS = hull shader: tessellation control shader
IA = input assembler: primitive assembly
Input layout: vertex elements
OM = output merger: blender
PS = pixel shader: fragment shader
Primitive topology: primitive type
Resource: buffer or texture
Shader resource (view): sampler view
SO = stream out: transform feedback
Unordered access view: view supporting random read/write access (usually from compute shaders)

* Legend

-: features D3D11 has and Gallium lacks
+: features Gallium has and D3D11 lacks
!: differences between D3D11 and Gallium
*: possible improvements to Gallium
>: references to comparisons of special enumerations
#: comment

* Gallium functions with no direct D3D10/D3D11 equivalent

clear
	+ Gallium supports clearing both render targets and depth/stencil with a single call

draw_range_elements
	+ Gallium supports indexed draw with explicit range

fence_signalled
fence_finish
	+ D3D10/D3D11 don't appear to support explicit fencing; queries can often substitute though, and flushing is supported

set_clip_state
	+ Gallium supports fixed function user clip planes, D3D10/D3D11 only support using the vertex shader for them

set_polygon_stipple
	+ Gallium supports polygon stipple

clearRT/clearDS
	+ Gallium supports subrectangle fills of surfaces, D3D10 only supports full clears of views

* DirectX 10/11 DDI functions and Gallium equivalents

AbandonCommandList (D3D11 only)
	- Gallium does not support deferred contexts

CalcPrivateBlendStateSize
CalcPrivateDepthStencilStateSize
CalcPrivateDepthStencilViewSize
CalcPrivateElementLayoutSize
CalcPrivateGeometryShaderWithStreamOutput
CalcPrivateOpenedResourceSize
CalcPrivateQuerySize
CalcPrivateRasterizerStateSize
CalcPrivateRenderTargetViewSize
CalcPrivateResourceSize
CalcPrivateSamplerSize
CalcPrivateShaderResourceViewSize
CalcPrivateShaderSize
CalcDeferredContextHandleSize (D3D11 only)
CalcPrivateCommandListSize (D3D11 only)
CalcPrivateDeferredContextSize (D3D11 only)
CalcPrivateTessellationShaderSize (D3D11 only)
CalcPrivateUnorderedAccessViewSize (D3D11 only)
	! D3D11 allocates private objects itself, using the size computed here
	* Gallium could do something similar to be able to put the private data inline into state tracker objects: this would allow them to fit in the same cacheline and improve performance

CheckDeferredContextHandleSizes (D3D11 only)
	- Gallium does not support deferred contexts

CheckFormatSupport -> screen->is_format_supported
	! Gallium passes usages to this function, D3D11 returns them
	- Gallium does not differentiate between blendable and non-blendable render targets
	! Gallium includes sample count directly, D3D11 uses additional query 

CheckMultisampleQualityLevels
	! is merged with is_format_supported

CommandListExecute (D3D11 only)
	- Gallium does not support command lists

CopyStructureCount (D3D11 only)
	- Gallium does not support unordered access views (views that can be written to arbitrarily from compute shaders)

ClearDepthStencilView -> clear
ClearRenderTargetView -> clear
	# D3D11 is not totally clear about whether this applies to any view or only a "currently-bound view"
	+ Gallium allows to clear both depth/stencil and render target(s) in a single operation
	+ Gallium supports double-precision depth values (but not rgba values!)
	* May want to also support double-precision rgba or use "float" for "depth"

ClearUnorderedAccessViewFloat (D3D11 only)
ClearUnorderedAccessViewUint (D3D11 only)
	- Gallium does not support unordered access views (views that can be written to arbitrarily from compute shaders)

CreateBlendState (extended in D3D10.1) -> create_blend_state
	# D3D10 does not support per-RT blend modes (but per-RT blending), only D3D10.1 does
	+ Gallium supports logic ops
	+ Gallium supports dithering
	+ Gallium supports using the broadcast alpha component of the blend constant color

CreateCommandList (D3D11 only)
	- Gallium does not support command lists

CreateComputeShader (D3D11 only)
	- Gallium does not support compute shaders

CreateDeferredContext (D3D11 only)
	- Gallium does not support deferred contexts

CreateDomainShader (D3D11 only)
	- Gallium does not support domain shaders

CreateHullShader (D3D11 only)
	- Gallium does not support hull shaders

CreateUnorderedAccessView (D3D11 only)
	- Gallium does not support unordered access views

CreateDepthStencilState -> create_depth_stencil_alpha_state
	! D3D11 has both a global stencil enable, and front/back enables; Gallium has only front/back enables
	+ Gallium has per-face writemask/valuemasks, D3D11 uses the same value for back and front
	+ Gallium supports the alpha test, which D3D11 lacks

CreateDepthStencilView -> get_tex_surface
CreateRenderTargetView -> get_tex_surface
	! Gallium merges depthstencil and rendertarget views into pipe_surface, which also doubles as a 2D surface abstraction
	- lack of texture array support
	- lack of render-to-buffer support
	+ Gallium supports using 3D texture zslices as a depth/stencil buffer (in theory)

CreateElementLayout -> create_vertex_elements_state
	! D3D11 allows sparse vertex elements (via InputRegister); in Gallium they must be specified sequentially
	! D3D11 has an extra flag (InputSlotClass) that is the same as instance_divisor == 0

CreateGeometryShader -> create_gs_state
CreateGeometryShaderWithStreamOutput -> create_gs_state + create_stream_output_state
CreatePixelShader -> create_fs_state
CreateVertexShader -> create_vs_state
	> bytecode is different (see D3d10tokenizedprogramformat.hpp)
	! D3D11 describes input/outputs separately from bytecode; Gallium has the tgsi_scan.c module to extract it from TGSI
	@ TODO: look into DirectX 10/11 semantics specification and bytecode

CheckCounter
CheckCounterInfo
CreateQuery -> create_query
	- Gallium only supports occlusion, primitives generated and primitives emitted queries
	! D3D11 implements fences with "event" queries
	* TIMESTAMP could be implemented as an additional fields for other queries: some cards have hardware support for exactly this
	* OCCLUSIONPREDICATE is required for the OpenGL v2 occlusion query functionality
	* others are performance counters, we may want them but they are not critical

CreateRasterizerState
	- Gallium lacks clamping of polygon offset depth biases
	- Gallium lacks support to disable depth clipping
	+ Gallium, like OpenGL, supports PIPE_POLYGON_MODE_POINT
	+ Gallium, like OpenGL, supports per-face polygon fill modes
	+ Gallium, like OpenGL, supports culling everything
	+ Gallium, like OpenGL, supports two-side lighting; D3D11 only has the facing attribute
	+ Gallium, like OpenGL, supports per-fill-mode polygon offset enables
	+ Gallium, like OpenGL, supports polygon smoothing
	+ Gallium, like OpenGL, supports polygon stipple
	+ Gallium, like OpenGL, supports point smoothing
	+ Gallium, like OpenGL, supports point sprites
	+ Gallium supports specifying point quad rasterization
	+ Gallium, like OpenGL, supports per-point point size
	+ Gallium, like OpenGL, supports line smoothing
	+ Gallium, like OpenGL, supports line stipple
	+ Gallium supports line last pixel rule specification
	+ Gallium, like OpenGL, supports provoking vertex convention
	+ Gallium supports D3D9 rasterization rules
	+ Gallium supports fixed line width
	+ Gallium supports fixed point size

CreateResource -> texture_create or buffer_create
	! D3D11 passes the dimensions of all mipmap levels to the create call, while Gallium has an implicit floor(x/2) rule
	# Note that hardware often has the implicit rule, so the D3D11 interface seems to make little sense
	# Also, the D3D11 API does not allow the user to specify mipmap sizes, so this really seems a dubious decision on Microsoft's part
	- D3D11 supports specifying initial data to write in the resource
	- Gallium does not support unordered access buffers
	! D3D11 specifies mapping flags (i.e. read/write/discard);:it's unclear what they are used for here
	- D3D11 supports odd things in the D3D10_DDI_RESOURCE_MISC_FLAG enum (D3D10_DDI_RESOURCE_MISC_DISCARD_ON_PRESENT, D3D11_DDI_RESOURCE_MISC_BUFFER_ALLOW_RAW_VIEWS, D3D11_DDI_RESOURCE_MISC_BUFFER_STRUCTURED)
	- Gallium does not support indirect draw call parameter buffers
	- Gallium lacks array textures
	! D3D11 supports specifying hardware modes and other stuff here for scanout resources
	+ Gallium allows specifying minimum buffer alignment
	! D3D11 implements cube maps as 2D array textures

CreateSampler
	- D3D11 supports a monochrome convolution filter for "text filtering"
	+ Gallium supports non-normalized coordinates
	+ Gallium supports CLAMP, MIRROR_CLAMP and MIRROR_CLAMP_TO_BORDER
	+ Gallium supports setting min/max/mip filters and anisotropy independently

CreateShaderResourceView (extended in D3D10.1) -> create_sampler_view
	- Gallium lacks sampler views over buffers
	- Gallium lacks texture arrays, and cube map views over texture arrays
	+ Gallium supports specifying a swizzle
	! D3D11 implements "cube views" as views into a 2D array texture

CsSetConstantBuffers (D3D11 only)
CsSetSamplers (D3D11 only)
CsSetShader (D3D11 only)
CsSetShaderResources (D3D11 only)
CsSetShaderWithIfaces (D3D11 only)
CsSetUnorderedAccessViews (D3D11 only)
	- Gallium does not support compute shaders

DestroyBlendState
DestroyCommandList (D3D11 only)
DestroyDepthStencilState
DestroyDepthStencilView
DestroyDevice
DestroyElementLayout
DestroyQuery
DestroyRasterizerState
DestroyRenderTargetView
DestroyResource
DestroySampler
DestroyShader
DestroyShaderResourceView
DestroyUnorderedAccessView (D3D11 only)
	# these are trivial

Dispatch (D3D11 only)
	- Gallium does not support compute shaders

DispatchIndirect (D3D11 only)
	- Gallium does not support compute shaders

Draw -> draw_arrays
	! D3D11 sets primitive modes separately with IaSetTopology: it's not obvious which is better

DrawAuto -> draw_auto

DrawIndexed -> draw_elements
	! D3D11 sets primitive modes separately with IaSetTopology: it's not obvious which is better
	* may want to add a separate set_index_buffer
	- Gallium lacks base vertex for indexed draw calls
	+ D3D11 lacks draw_range_elements functionality, which is required for OpenGL

DrawIndexedInstanced -> draw_elements_instanced
	! D3D11 sets primitive modes separately with IaSetTopology: it's not obvious which is better
	* may want to add a separate set_index_buffer
	- Gallium lacks base vertex for indexed draw calls

DrawIndexedInstancedIndirect (D3D11 only) -> call draw_elements_instanced multiple times in software
	# this allows to use an hardware buffer to specify the parameters for multiple draw_elements_instanced calls
	- Gallium does not support draw call parameter buffers and indirect draw

DrawInstanced -> draw_arrays_instanced
	! D3D11 sets primitive modes separately with IaSetTopology: it's not obvious which is better

DrawInstancedIndirect (D3D11 only) -> call draw_arrays_instanced multiple times in software
	# this allows to use an hardware buffer to specify the parameters for multiple draw_arrays_instanced calls
	- Gallium does not support draw call parameter buffers and indirect draws

DsSetConstantBuffers (D3D11 only)
DsSetSamplers (D3D11 only)
DsSetShader (D3D11 only)
DsSetShaderResources (D3D11 only)
DsSetShaderWithIfaces (D3D11 only)
	- Gallium does not support domain shaders

Flush -> flush
	! Gallium supports fencing and several kinds of flushing here, D3D11 just has a dumb glFlush-like function

GenMips
	- Gallium lacks a mipmap generation interface, and does this manually with the 3D engine
	* it may be useful to add a mipmap generation interface, since the hardware (especially older cards) may have a better way than using the 3D engine

GsSetConstantBuffers -> for(i = StartBuffer; i < NumBuffers; ++i) set_constant_buffer(PIPE_SHADER_GEOMETRY, i, phBuffers[i])

GsSetSamplers
	- Gallium does not support sampling in geometry shaders

GsSetShader -> bind_gs_state

GsSetShaderWithIfaces (D3D11 only)
	- Gallium does not support shader interfaces

GsSetShaderResources
	- Gallium does not support sampling in geometry shaders

HsSetConstantBuffers (D3D11 only)
HsSetSamplers (D3D11 only)
HsSetShader (D3D11 only)
HsSetShaderResources (D3D11 only)
HsSetShaderWithIfaces (D3D11 only)
	- Gallium does not support hull shaders

IaSetIndexBuffer
	! Gallium passes this to the draw_elements or draw_elements_instanced calls
	+ Gallium supports 8-bit indices
	! the D3D11 interface allows index-size-unaligned byte offsets into index buffers; it's not clear whether they actually work

IaSetInputLayout -> bind_vertex_elements_state

IaSetTopology
	! Gallium passes the topology = primitive type to the draw calls
	* may want to add an interface for this
	- Gallium lacks support for DirectX 11 tessellated primitives
	+ Gallium supports line loops, triangle fans, quads, quad strips and polygons

IaSetVertexBuffers -> set_vertex_buffers
	+ Gallium allows to specify a max_index here
	- Gallium only allows setting all vertex buffers at once, while D3D11 supports setting a subset

OpenResource -> texture_from_handle

PsSetConstantBuffers -> for(i = StartBuffer; i < NumBuffers; ++i) set_constant_buffer(PIPE_SHADER_FRAGMENT, i, phBuffers[i])
	* may want to split into fragment/vertex-specific versions

PsSetSamplers -> bind_fragment_sampler_states
	* may want to allow binding subsets instead of all at once

PsSetShader -> bind_fs_state

PsSetShaderWithIfaces (D3D11 only)
	- Gallium does not support shader interfaces

PsSetShaderResources -> set_fragment_sampler_views
	* may want to allow binding subsets instead of all at once

QueryBegin -> begin_query

QueryEnd -> end_query

QueryGetData -> get_query_result
	- D3D11 supports reading an arbitrary data chunk for query results, Gallium only supports reading a 64-bit integer
	+ D3D11 doesn't seem to support actually waiting for the query result (?!)
	- D3D11 supports optionally not flushing command buffers here and instead returning DXGI_DDI_ERR_WASSTILLDRAWING

RecycleCommandList (D3D11 only)
RecycleCreateCommandList (D3D11 only)
RecycleDestroyCommandList (D3D11 only)
	- Gallium does not support command lists

RecycleCreateDeferredContext (D3D11 only)
	- Gallium does not support deferred contexts

RelocateDeviceFuncs
	- Gallium does not support moving pipe_context, while D3D11 seems to, using this

ResetPrimitiveID (D3D10.1+ only, #ifdef D3D10PSGP)
	# used to do vertex processing on the GPU on Intel G45 chipsets when it is faster this way (see www.intel.com/Assets/PDF/whitepaper/322931.pdf)
	# presumably this resets the primitive id system value
	- Gallium does not support vertex pipeline bypass anymore

ResourceCopy
ResourceCopyRegion
ResourceConvert (D3D10.1+ only)
ResourceConvertRegion (D3D10.1+ only)
	-> resource_copy_region
	- Gallium does not support hardware buffer copies
	- Gallium does not support copying 3D texture subregions in a single call

ResourceIsStagingBusy -> is_texture_referenced, is_buffer_referenced
	- Gallium does not support checking reference for a whole texture, but only a specific surface

ResourceReadAfterWriteHazard
	! Gallium specifies hides this, except for the render and texture caches

ResourceResolveSubresource -> resource_resolve

ResourceMap
ResourceUnmap
DynamicConstantBufferMapDiscard
DynamicConstantBufferUnmap
DynamicIABufferMapDiscard
DynamicIABufferMapNoOverwrite
DynamicIABufferUnmap
DynamicResourceMapDiscard
DynamicResourceUnmap
StagingResourceMap
StagingResourceUnmap
	-> buffer_map / buffer_unmap
	-> transfer functions
	! Gallium and D3D have different semantics for transfers
	* D3D separates vertex/index buffers from constant buffers
	! D3D separates some buffer flags into specialized calls

ResourceUpdateSubresourceUP -> transfer functionality, transfer_inline_write in gallium-resources
DefaultConstantBufferUpdateSubresourceUP -> transfer functionality, transfer_inline_write in gallium-resources

SetBlendState -> bind_blend_state, set_blend_color and set_sample_mask
	! D3D11 fuses bind_blend_state, set_blend_color and set_sample_mask in a single function

SetDepthStencilState -> bind_depth_stencil_alpha_state and set_stencil_ref
	! D3D11 fuses bind_depth_stencil_alpha_state and set_stencil_ref in a single function

SetPredication -> render_condition
	# here both D3D11 and Gallium seem very limited (hardware is too, probably though)
	# ideally, we should support nested conditional rendering, as well as more complex tests (checking for an arbitrary range, after an AND with arbitrary mask )
	# of couse, hardware support is probably as limited as OpenGL/D3D11
	+ Gallium, like NV_conditional_render, supports by-region and wait flags
	- D3D11 supports predication conditional on being equal any value (along with occlusion predicates); Gallium only supports on non-zero

SetRasterizerState -> bind_rasterizer_state

SetRenderTargets (extended in D3D11) -> set_framebuffer_state
	! Gallium passed a width/height here, D3D11 does not
	! Gallium lacks ClearTargets (but this is redundant and the driver can trivially compute this if desired)
	- Gallium does not support unordered access views
	- Gallium does not support geometry shader selection of texture array image / 3D texture zslice

SetResourceMinLOD (D3D11 only)
	- Gallium does not support min lod directly on textures

SetScissorRects
	- Gallium lacks support for multiple geometry-shader-selectable scissor rectangles D3D11 has

SetTextFilterSize
	- Gallium lacks support for text filters

SetVertexPipelineOutput (D3D10.1+ only)
	# used to do vertex processing on the GPU on Intel G45 chipsets when it is faster this way (see www.intel.com/Assets/PDF/whitepaper/322931.pdf)
	- Gallium does not support vertex pipeline bypass anymore

SetViewports
	- Gallium lacks support for multiple geometry-shader-selectable viewports D3D11 has

ShaderResourceViewReadAfterWriteHazard -> flush(PIPE_FLUSH_RENDER_CACHE)
	- Gallium does not support specifying this per-render-target/view

SoSetTargets -> set_stream_output_buffers

VsSetConstantBuffers -> for(i = StartBuffer; i < NumBuffers; ++i) set_constant_buffer(PIPE_SHADER_VERTEX, i, phBuffers[i])
	* may want to split into fragment/vertex-specific versions

VsSetSamplers -> bind_vertex_sampler_states
	* may want to allow binding subsets instead of all at once

VsSetShader -> bind_vs_state

VsSetShaderWithIfaces (D3D11 only)
	- Gallium does not support shader interfaces

VsSetShaderResources  -> set_fragment_sampler_views
	* may want to allow binding subsets instead of all at once