/* * Copyright © 2011 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ #include "main/macros.h" #include "intel_batchbuffer.h" #include "brw_context.h" #include "brw_state.h" #include "brw_defines.h" /** * The following diagram shows how we partition the URB: * * 16kB or 32kB Rest of the URB space * __________-__________ _________________-_________________ * / \ / \ * +-------------------------------------------------------------+ * | VS/FS/GS Push | VS/GS URB | * | Constants | Entries | * +-------------------------------------------------------------+ * * Notably, push constants must be stored at the beginning of the URB * space, while entries can be stored anywhere. Ivybridge and Haswell * GT1/GT2 have a maximum constant buffer size of 16kB, while Haswell GT3 * doubles this (32kB). * * Ivybridge and Haswell GT1/GT2 allow push constants to be located (and * sized) in increments of 1kB. Haswell GT3 requires them to be located and * sized in increments of 2kB. * * Currently we split the constant buffer space evenly among whatever stages * are active. This is probably not ideal, but simple. * * Ivybridge GT1 and Haswell GT1 have 128kB of URB space. * Ivybridge GT2 and Haswell GT2 have 256kB of URB space. * Haswell GT3 has 512kB of URB space. * * See "Volume 2a: 3D Pipeline," section 1.8, "Volume 1b: Configurations", * and the documentation for 3DSTATE_PUSH_CONSTANT_ALLOC_xS. */ static void gen7_allocate_push_constants(struct brw_context *brw) { unsigned avail_size = 16; unsigned multiplier = (brw->gen >= 8 || (brw->is_haswell && brw->gt == 3)) ? 2 : 1; /* BRW_NEW_GEOMETRY_PROGRAM */ bool gs_present = brw->geometry_program; unsigned vs_size, gs_size; if (gs_present) { vs_size = avail_size / 3; avail_size -= vs_size; gs_size = avail_size / 2; avail_size -= gs_size; } else { vs_size = avail_size / 2; avail_size -= vs_size; gs_size = 0; } unsigned fs_size = avail_size; gen7_emit_push_constant_state(brw, multiplier * vs_size, multiplier * gs_size, multiplier * fs_size); /* From p115 of the Ivy Bridge PRM (3.2.1.4 3DSTATE_PUSH_CONSTANT_ALLOC_VS): * * Programming Restriction: * * The 3DSTATE_CONSTANT_VS must be reprogrammed prior to the next * 3DPRIMITIVE command after programming the * 3DSTATE_PUSH_CONSTANT_ALLOC_VS. * * Similar text exists for the other 3DSTATE_PUSH_CONSTANT_ALLOC_* * commands. */ brw->state.dirty.brw |= BRW_NEW_PUSH_CONSTANT_ALLOCATION; } void gen7_emit_push_constant_state(struct brw_context *brw, unsigned vs_size, unsigned gs_size, unsigned fs_size) { unsigned offset = 0; BEGIN_BATCH(6); OUT_BATCH(_3DSTATE_PUSH_CONSTANT_ALLOC_VS << 16 | (2 - 2)); OUT_BATCH(vs_size | offset << GEN7_PUSH_CONSTANT_BUFFER_OFFSET_SHIFT); offset += vs_size; OUT_BATCH(_3DSTATE_PUSH_CONSTANT_ALLOC_GS << 16 | (2 - 2)); OUT_BATCH(gs_size | offset << GEN7_PUSH_CONSTANT_BUFFER_OFFSET_SHIFT); offset += gs_size; OUT_BATCH(_3DSTATE_PUSH_CONSTANT_ALLOC_PS << 16 | (2 - 2)); OUT_BATCH(fs_size | offset << GEN7_PUSH_CONSTANT_BUFFER_OFFSET_SHIFT); ADVANCE_BATCH(); /* From p292 of the Ivy Bridge PRM (11.2.4 3DSTATE_PUSH_CONSTANT_ALLOC_PS): * * A PIPE_CONTOL command with the CS Stall bit set must be programmed * in the ring after this instruction. * * No such restriction exists for Haswell or Baytrail. */ if (brw->gen < 8 && !brw->is_haswell && !brw->is_baytrail) gen7_emit_cs_stall_flush(brw); } const struct brw_tracked_state gen7_push_constant_space = { .dirty = { .mesa = 0, .brw = BRW_NEW_CONTEXT | BRW_NEW_GEOMETRY_PROGRAM, .cache = 0, }, .emit = gen7_allocate_push_constants, }; static void gen7_upload_urb(struct brw_context *brw) { const int push_size_kB = (brw->gen >= 8 || (brw->is_haswell && brw->gt == 3)) ? 32 : 16; /* CACHE_NEW_VS_PROG */ unsigned vs_size = MAX2(brw->vs.prog_data->base.urb_entry_size, 1); unsigned vs_entry_size_bytes = vs_size * 64; /* BRW_NEW_GEOMETRY_PROGRAM, CACHE_NEW_GS_PROG */ bool gs_present = brw->geometry_program; unsigned gs_size = gs_present ? brw->gs.prog_data->base.urb_entry_size : 1; unsigned gs_entry_size_bytes = gs_size * 64; /* If we're just switching between programs with the same URB requirements, * skip the rest of the logic. */ if (!(brw->state.dirty.brw & BRW_NEW_CONTEXT) && brw->urb.vsize == vs_size && brw->urb.gs_present == gs_present && brw->urb.gsize == gs_size) { return; } brw->urb.vsize = vs_size; brw->urb.gs_present = gs_present; brw->urb.gsize = gs_size; /* From p35 of the Ivy Bridge PRM (section 1.7.1: 3DSTATE_URB_GS): * * VS Number of URB Entries must be divisible by 8 if the VS URB Entry * Allocation Size is less than 9 512-bit URB entries. * * Similar text exists for GS. */ unsigned vs_granularity = (vs_size < 9) ? 8 : 1; unsigned gs_granularity = (gs_size < 9) ? 8 : 1; /* URB allocations must be done in 8k chunks. */ unsigned chunk_size_bytes = 8192; /* Determine the size of the URB in chunks. */ unsigned urb_chunks = brw->urb.size * 1024 / chunk_size_bytes; /* Reserve space for push constants */ unsigned push_constant_bytes = 1024 * push_size_kB; unsigned push_constant_chunks = push_constant_bytes / chunk_size_bytes; /* Initially, assign each stage the minimum amount of URB space it needs, * and make a note of how much additional space it "wants" (the amount of * additional space it could actually make use of). */ /* VS has a lower limit on the number of URB entries */ unsigned vs_chunks = ALIGN(brw->urb.min_vs_entries * vs_entry_size_bytes, chunk_size_bytes) / chunk_size_bytes; unsigned vs_wants = ALIGN(brw->urb.max_vs_entries * vs_entry_size_bytes, chunk_size_bytes) / chunk_size_bytes - vs_chunks; unsigned gs_chunks = 0; unsigned gs_wants = 0; if (gs_present) { /* There are two constraints on the minimum amount of URB space we can * allocate: * * (1) We need room for at least 2 URB entries, since we always operate * the GS in DUAL_OBJECT mode. * * (2) We can't allocate less than nr_gs_entries_granularity. */ gs_chunks = ALIGN(MAX2(gs_granularity, 2) * gs_entry_size_bytes, chunk_size_bytes) / chunk_size_bytes; gs_wants = ALIGN(brw->urb.max_gs_entries * gs_entry_size_bytes, chunk_size_bytes) / chunk_size_bytes - gs_chunks; } /* There should always be enough URB space to satisfy the minimum * requirements of each stage. */ unsigned total_needs = push_constant_chunks + vs_chunks + gs_chunks; assert(total_needs <= urb_chunks); /* Mete out remaining space (if any) in proportion to "wants". */ unsigned total_wants = vs_wants + gs_wants; unsigned remaining_space = urb_chunks - total_needs; if (remaining_space > total_wants) remaining_space = total_wants; if (remaining_space > 0) { unsigned vs_additional = (unsigned) round(vs_wants * (((double) remaining_space) / total_wants)); vs_chunks += vs_additional; remaining_space -= vs_additional; gs_chunks += remaining_space; } /* Sanity check that we haven't over-allocated. */ assert(push_constant_chunks + vs_chunks + gs_chunks <= urb_chunks); /* Finally, compute the number of entries that can fit in the space * allocated to each stage. */ unsigned nr_vs_entries = vs_chunks * chunk_size_bytes / vs_entry_size_bytes; unsigned nr_gs_entries = gs_chunks * chunk_size_bytes / gs_entry_size_bytes; /* Since we rounded up when computing *_wants, this may be slightly more * than the maximum allowed amount, so correct for that. */ nr_vs_entries = MIN2(nr_vs_entries, brw->urb.max_vs_entries); nr_gs_entries = MIN2(nr_gs_entries, brw->urb.max_gs_entries); /* Ensure that we program a multiple of the granularity. */ nr_vs_entries = ROUND_DOWN_TO(nr_vs_entries, vs_granularity); nr_gs_entries = ROUND_DOWN_TO(nr_gs_entries, gs_granularity); /* Finally, sanity check to make sure we have at least the minimum number * of entries needed for each stage. */ assert(nr_vs_entries >= brw->urb.min_vs_entries); if (gs_present) assert(nr_gs_entries >= 2); /* Gen7 doesn't actually use brw->urb.nr_{vs,gs}_entries, but it seems * better to put reasonable data in there rather than leave them * uninitialized. */ brw->urb.nr_vs_entries = nr_vs_entries; brw->urb.nr_gs_entries = nr_gs_entries; /* Lay out the URB in the following order: * - push constants * - VS * - GS */ brw->urb.vs_start = push_constant_chunks; brw->urb.gs_start = push_constant_chunks + vs_chunks; if (brw->gen == 7 && !brw->is_haswell && !brw->is_baytrail) gen7_emit_vs_workaround_flush(brw); gen7_emit_urb_state(brw, brw->urb.nr_vs_entries, vs_size, brw->urb.vs_start, brw->urb.nr_gs_entries, gs_size, brw->urb.gs_start); } void gen7_emit_urb_state(struct brw_context *brw, unsigned nr_vs_entries, unsigned vs_size, unsigned vs_start, unsigned nr_gs_entries, unsigned gs_size, unsigned gs_start) { BEGIN_BATCH(8); OUT_BATCH(_3DSTATE_URB_VS << 16 | (2 - 2)); OUT_BATCH(nr_vs_entries | ((vs_size - 1) << GEN7_URB_ENTRY_SIZE_SHIFT) | (vs_start << GEN7_URB_STARTING_ADDRESS_SHIFT)); OUT_BATCH(_3DSTATE_URB_GS << 16 | (2 - 2)); OUT_BATCH(nr_gs_entries | ((gs_size - 1) << GEN7_URB_ENTRY_SIZE_SHIFT) | (gs_start << GEN7_URB_STARTING_ADDRESS_SHIFT)); /* Allocate the HS and DS zero space - we don't use them. */ OUT_BATCH(_3DSTATE_URB_HS << 16 | (2 - 2)); OUT_BATCH((0 << GEN7_URB_ENTRY_SIZE_SHIFT) | (vs_start << GEN7_URB_STARTING_ADDRESS_SHIFT)); OUT_BATCH(_3DSTATE_URB_DS << 16 | (2 - 2)); OUT_BATCH((0 << GEN7_URB_ENTRY_SIZE_SHIFT) | (vs_start << GEN7_URB_STARTING_ADDRESS_SHIFT)); ADVANCE_BATCH(); } const struct brw_tracked_state gen7_urb = { .dirty = { .mesa = 0, .brw = BRW_NEW_CONTEXT | BRW_NEW_GEOMETRY_PROGRAM, .cache = (CACHE_NEW_VS_PROG | CACHE_NEW_GS_PROG), }, .emit = gen7_upload_urb, };