/* * Copyright © 2012 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ #pragma once #include #include "brw_reg.h" #include "intel_mipmap_tree.h" struct brw_context; struct brw_wm_prog_key; #ifdef __cplusplus extern "C" { #endif void brw_blorp_blit_miptrees(struct brw_context *brw, struct intel_mipmap_tree *src_mt, unsigned src_level, unsigned src_layer, mesa_format src_format, int src_swizzle, struct intel_mipmap_tree *dst_mt, unsigned dst_level, unsigned dst_layer, mesa_format dst_format, float src_x0, float src_y0, float src_x1, float src_y1, float dst_x0, float dst_y0, float dst_x1, float dst_y1, GLenum filter, bool mirror_x, bool mirror_y, bool decode_srgb, bool encode_srgb); bool brw_blorp_clear_color(struct brw_context *brw, struct gl_framebuffer *fb, GLbitfield mask, bool partial_clear, bool encode_srgb); void brw_blorp_resolve_color(struct brw_context *brw, struct intel_mipmap_tree *mt); /** * Binding table indices used by BLORP. */ enum { BRW_BLORP_RENDERBUFFER_BINDING_TABLE_INDEX, BRW_BLORP_TEXTURE_BINDING_TABLE_INDEX, BRW_BLORP_NUM_BINDING_TABLE_ENTRIES }; struct brw_blorp_surface_info { struct intel_mipmap_tree *mt; /** * The miplevel to use. */ uint32_t level; /** * The 2D layer within the miplevel. Combined, level and layer define the * 2D miptree slice to use. * * Note: if mt is a 2D multisample array texture on Gen7+ using * INTEL_MSAA_LAYOUT_UMS or INTEL_MSAA_LAYOUT_CMS, layer is the physical * layer holding sample 0. So, for example, if mt->num_samples == 4, then * logical layer n corresponds to layer == 4*n. */ uint32_t layer; /** * Width of the miplevel to be used. For surfaces using * INTEL_MSAA_LAYOUT_IMS, this is measured in samples, not pixels. */ uint32_t width; /** * Height of the miplevel to be used. For surfaces using * INTEL_MSAA_LAYOUT_IMS, this is measured in samples, not pixels. */ uint32_t height; /** * X offset within the surface to texture from (or render to). For * surfaces using INTEL_MSAA_LAYOUT_IMS, this is measured in samples, not * pixels. */ uint32_t x_offset; /** * Y offset within the surface to texture from (or render to). For * surfaces using INTEL_MSAA_LAYOUT_IMS, this is measured in samples, not * pixels. */ uint32_t y_offset; /* Setting this flag indicates that the buffer's contents are W-tiled * stencil data, but the surface state should be set up for Y tiled * MESA_FORMAT_R_UNORM8 data (this is necessary because surface states don't * support W tiling). * * Since W tiles are 64 pixels wide by 64 pixels high, whereas Y tiles of * MESA_FORMAT_R_UNORM8 data are 128 pixels wide by 32 pixels high, the width and * pitch stored in the surface state will be multiplied by 2, and the * height will be halved. Also, since W and Y tiles store their data in a * different order, the width and height will be rounded up to a multiple * of the tile size, to ensure that the WM program can access the full * width and height of the buffer. */ bool map_stencil_as_y_tiled; unsigned num_samples; /** * Indicates if we use the standard miptree layout (ALL_LOD_IN_EACH_SLICE), * or if we tightly pack array slices at each LOD (ALL_SLICES_AT_EACH_LOD). * * If ALL_SLICES_AT_EACH_LOD is set, then ARYSPC_LOD0 can be used. Ignored * prior to Gen7. */ enum miptree_array_layout array_layout; /** * Format that should be used when setting up the surface state for this * surface. Should correspond to one of the BRW_SURFACEFORMAT_* enums. */ uint32_t brw_surfaceformat; /** * For MSAA surfaces, MSAA layout that should be used when setting up the * surface state for this surface. */ enum intel_msaa_layout msaa_layout; /** * In order to support cases where RGBA format is backing client requested * RGB, one needs to have means to force alpha channel to one when user * requested RGB surface is used as blit source. This is possible by * setting source swizzle for the texture surface. */ int swizzle; }; void brw_blorp_surface_info_init(struct brw_context *brw, struct brw_blorp_surface_info *info, struct intel_mipmap_tree *mt, unsigned int level, unsigned int layer, mesa_format format, bool is_render_target); uint32_t brw_blorp_compute_tile_offsets(const struct brw_blorp_surface_info *info, uint32_t *tile_x, uint32_t *tile_y); struct brw_blorp_coord_transform { float multiplier; float offset; }; struct brw_blorp_wm_push_constants { uint32_t dst_x0; uint32_t dst_x1; uint32_t dst_y0; uint32_t dst_y1; /* Top right coordinates of the rectangular grid used for scaled blitting */ float rect_grid_x1; float rect_grid_y1; struct brw_blorp_coord_transform x_transform; struct brw_blorp_coord_transform y_transform; /* Minimum layer setting works for all the textures types but texture_3d * for which the setting has no effect. Use the z-coordinate instead. */ uint32_t src_z; /* Pad out to an integral number of registers */ uint32_t pad[5]; }; #define BRW_BLORP_NUM_PUSH_CONSTANT_DWORDS \ (sizeof(struct brw_blorp_wm_push_constants) / 4) /* Every 32 bytes of push constant data constitutes one GEN register. */ static const unsigned int BRW_BLORP_NUM_PUSH_CONST_REGS = sizeof(struct brw_blorp_wm_push_constants) / 32; struct brw_blorp_prog_data { bool dispatch_8; bool dispatch_16; uint8_t first_curbe_grf_0; uint8_t first_curbe_grf_2; uint32_t ksp_offset_2; /** * True if the WM program should be run in MSDISPMODE_PERSAMPLE with more * than one sample per pixel. */ bool persample_msaa_dispatch; /* The compiler will re-arrange push constants and store the upload order * here. Given an index 'i' in the final upload buffer, param[i] gives the * index in the uniform store. In other words, the value to be uploaded can * be found by brw_blorp_params::wm_push_consts[param[i]]. */ uint8_t nr_params; uint8_t param[BRW_BLORP_NUM_PUSH_CONSTANT_DWORDS]; }; struct brw_blorp_params { uint32_t x0; uint32_t y0; uint32_t x1; uint32_t y1; struct brw_blorp_surface_info depth; uint32_t depth_format; struct brw_blorp_surface_info src; struct brw_blorp_surface_info dst; enum gen6_hiz_op hiz_op; union { unsigned fast_clear_op; unsigned resolve_type; }; bool color_write_disable[4]; struct brw_blorp_wm_push_constants wm_push_consts; unsigned num_varyings; unsigned num_draw_buffers; unsigned num_layers; uint32_t wm_prog_kernel; struct brw_blorp_prog_data *wm_prog_data; }; void brw_blorp_params_init(struct brw_blorp_params *params); void brw_blorp_exec(struct brw_context *brw, const struct brw_blorp_params *params); void gen6_blorp_hiz_exec(struct brw_context *brw, struct intel_mipmap_tree *mt, unsigned level, unsigned layer, enum gen6_hiz_op op); void gen6_blorp_exec(struct brw_context *brw, const struct brw_blorp_params *params); void gen7_blorp_exec(struct brw_context *brw, const struct brw_blorp_params *params); void gen8_blorp_exec(struct brw_context *brw, const struct brw_blorp_params *params); struct brw_blorp_blit_prog_key { /* Number of samples per pixel that have been configured in the surface * state for texturing from. */ unsigned tex_samples; /* MSAA layout that has been configured in the surface state for texturing * from. */ enum intel_msaa_layout tex_layout; /* Actual number of samples per pixel in the source image. */ unsigned src_samples; /* Actual MSAA layout used by the source image. */ enum intel_msaa_layout src_layout; /* Number of samples per pixel that have been configured in the render * target. */ unsigned rt_samples; /* MSAA layout that has been configured in the render target. */ enum intel_msaa_layout rt_layout; /* Actual number of samples per pixel in the destination image. */ unsigned dst_samples; /* Actual MSAA layout used by the destination image. */ enum intel_msaa_layout dst_layout; /* Type of the data to be read from the texture (one of * BRW_REGISTER_TYPE_{UD,D,F}). */ enum brw_reg_type texture_data_type; /* True if the source image is W tiled. If true, the surface state for the * source image must be configured as Y tiled, and tex_samples must be 0. */ bool src_tiled_w; /* True if the destination image is W tiled. If true, the surface state * for the render target must be configured as Y tiled, and rt_samples must * be 0. */ bool dst_tiled_w; /* True if all source samples should be blended together to produce each * destination pixel. If true, src_tiled_w must be false, tex_samples must * equal src_samples, and tex_samples must be nonzero. */ bool blend; /* True if the rectangle being sent through the rendering pipeline might be * larger than the destination rectangle, so the WM program should kill any * pixels that are outside the destination rectangle. */ bool use_kill; /** * True if the WM program should be run in MSDISPMODE_PERSAMPLE with more * than one sample per pixel. */ bool persample_msaa_dispatch; /* True for scaled blitting. */ bool blit_scaled; /* Scale factors between the pixel grid and the grid of samples. We're * using grid of samples for bilinear filetring in multisample scaled blits. */ float x_scale; float y_scale; /* True for blits with filter = GL_LINEAR. */ bool bilinear_filter; }; /** * \name BLORP internals * \{ * * Used internally by gen6_blorp_exec() and gen7_blorp_exec(). */ void brw_blorp_init_wm_prog_key(struct brw_wm_prog_key *wm_key); const unsigned * brw_blorp_compile_nir_shader(struct brw_context *brw, struct nir_shader *nir, const struct brw_wm_prog_key *wm_key, bool use_repclear, struct brw_blorp_prog_data *prog_data, unsigned *program_size); void gen6_blorp_init(struct brw_context *brw); void gen6_blorp_emit_vertices(struct brw_context *brw, const struct brw_blorp_params *params); uint32_t gen6_blorp_emit_blend_state(struct brw_context *brw, const struct brw_blorp_params *params); uint32_t gen6_blorp_emit_cc_state(struct brw_context *brw); uint32_t gen6_blorp_emit_wm_constants(struct brw_context *brw, const struct brw_blorp_params *params); void gen6_blorp_emit_vs_disable(struct brw_context *brw, const struct brw_blorp_params *params); uint32_t gen6_blorp_emit_binding_table(struct brw_context *brw, uint32_t wm_surf_offset_renderbuffer, uint32_t wm_surf_offset_texture); uint32_t gen6_blorp_emit_depth_stencil_state(struct brw_context *brw, const struct brw_blorp_params *params); void gen6_blorp_emit_gs_disable(struct brw_context *brw, const struct brw_blorp_params *params); void gen6_blorp_emit_clip_disable(struct brw_context *brw); void gen6_blorp_emit_drawing_rectangle(struct brw_context *brw, const struct brw_blorp_params *params); uint32_t gen6_blorp_emit_sampler_state(struct brw_context *brw, unsigned tex_filter, unsigned max_lod, bool non_normalized_coords); void gen7_blorp_emit_urb_config(struct brw_context *brw); void gen7_blorp_emit_blend_state_pointer(struct brw_context *brw, uint32_t cc_blend_state_offset); void gen7_blorp_emit_cc_state_pointer(struct brw_context *brw, uint32_t cc_state_offset); void gen7_blorp_emit_cc_viewport(struct brw_context *brw); void gen7_blorp_emit_te_disable(struct brw_context *brw); void gen7_blorp_emit_binding_table_pointers_ps(struct brw_context *brw, uint32_t wm_bind_bo_offset); void gen7_blorp_emit_sampler_state_pointers_ps(struct brw_context *brw, uint32_t sampler_offset); void gen7_blorp_emit_clear_params(struct brw_context *brw, const struct brw_blorp_params *params); void gen7_blorp_emit_constant_ps(struct brw_context *brw, uint32_t wm_push_const_offset); void gen7_blorp_emit_constant_ps_disable(struct brw_context *brw); void gen7_blorp_emit_primitive(struct brw_context *brw, const struct brw_blorp_params *params); /** \} */ #ifdef __cplusplus } /* end extern "C" */ #endif /* __cplusplus */