/*
 * Copyright © 2015 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 */

#include <assert.h>
#include <stdbool.h>

#include "anv_private.h"
#include "vk_format_info.h"
#include "vk_util.h"

#include "common/gen_l3_config.h"
#include "genxml/gen_macros.h"
#include "genxml/genX_pack.h"

static void
emit_lrm(struct anv_batch *batch,
         uint32_t reg, struct anv_bo *bo, uint32_t offset)
{
   anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_MEM), lrm) {
      lrm.RegisterAddress  = reg;
      lrm.MemoryAddress    = (struct anv_address) { bo, offset };
   }
}

static void
emit_lri(struct anv_batch *batch, uint32_t reg, uint32_t imm)
{
   anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_IMM), lri) {
      lri.RegisterOffset   = reg;
      lri.DataDWord        = imm;
   }
}

#if GEN_IS_HASWELL || GEN_GEN >= 8
static void
emit_lrr(struct anv_batch *batch, uint32_t dst, uint32_t src)
{
   anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_REG), lrr) {
      lrr.SourceRegisterAddress        = src;
      lrr.DestinationRegisterAddress   = dst;
   }
}
#endif

void
genX(cmd_buffer_emit_state_base_address)(struct anv_cmd_buffer *cmd_buffer)
{
   struct anv_device *device = cmd_buffer->device;

   /* Emit a render target cache flush.
    *
    * This isn't documented anywhere in the PRM.  However, it seems to be
    * necessary prior to changing the surface state base adress.  Without
    * this, we get GPU hangs when using multi-level command buffers which
    * clear depth, reset state base address, and then go render stuff.
    */
   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
      pc.DCFlushEnable = true;
      pc.RenderTargetCacheFlushEnable = true;
      pc.CommandStreamerStallEnable = true;
   }

   anv_batch_emit(&cmd_buffer->batch, GENX(STATE_BASE_ADDRESS), sba) {
      sba.GeneralStateBaseAddress = (struct anv_address) { NULL, 0 };
      sba.GeneralStateMemoryObjectControlState = GENX(MOCS);
      sba.GeneralStateBaseAddressModifyEnable = true;

      sba.SurfaceStateBaseAddress =
         anv_cmd_buffer_surface_base_address(cmd_buffer);
      sba.SurfaceStateMemoryObjectControlState = GENX(MOCS);
      sba.SurfaceStateBaseAddressModifyEnable = true;

      sba.DynamicStateBaseAddress =
         (struct anv_address) { &device->dynamic_state_pool.block_pool.bo, 0 };
      sba.DynamicStateMemoryObjectControlState = GENX(MOCS);
      sba.DynamicStateBaseAddressModifyEnable = true;

      sba.IndirectObjectBaseAddress = (struct anv_address) { NULL, 0 };
      sba.IndirectObjectMemoryObjectControlState = GENX(MOCS);
      sba.IndirectObjectBaseAddressModifyEnable = true;

      sba.InstructionBaseAddress =
         (struct anv_address) { &device->instruction_state_pool.block_pool.bo, 0 };
      sba.InstructionMemoryObjectControlState = GENX(MOCS);
      sba.InstructionBaseAddressModifyEnable = true;

#  if (GEN_GEN >= 8)
      /* Broadwell requires that we specify a buffer size for a bunch of
       * these fields.  However, since we will be growing the BO's live, we
       * just set them all to the maximum.
       */
      sba.GeneralStateBufferSize                = 0xfffff;
      sba.GeneralStateBufferSizeModifyEnable    = true;
      sba.DynamicStateBufferSize                = 0xfffff;
      sba.DynamicStateBufferSizeModifyEnable    = true;
      sba.IndirectObjectBufferSize              = 0xfffff;
      sba.IndirectObjectBufferSizeModifyEnable  = true;
      sba.InstructionBufferSize                 = 0xfffff;
      sba.InstructionBuffersizeModifyEnable     = true;
#  endif
   }

   /* After re-setting the surface state base address, we have to do some
    * cache flusing so that the sampler engine will pick up the new
    * SURFACE_STATE objects and binding tables. From the Broadwell PRM,
    * Shared Function > 3D Sampler > State > State Caching (page 96):
    *
    *    Coherency with system memory in the state cache, like the texture
    *    cache is handled partially by software. It is expected that the
    *    command stream or shader will issue Cache Flush operation or
    *    Cache_Flush sampler message to ensure that the L1 cache remains
    *    coherent with system memory.
    *
    *    [...]
    *
    *    Whenever the value of the Dynamic_State_Base_Addr,
    *    Surface_State_Base_Addr are altered, the L1 state cache must be
    *    invalidated to ensure the new surface or sampler state is fetched
    *    from system memory.
    *
    * The PIPE_CONTROL command has a "State Cache Invalidation Enable" bit
    * which, according the PIPE_CONTROL instruction documentation in the
    * Broadwell PRM:
    *
    *    Setting this bit is independent of any other bit in this packet.
    *    This bit controls the invalidation of the L1 and L2 state caches
    *    at the top of the pipe i.e. at the parsing time.
    *
    * Unfortunately, experimentation seems to indicate that state cache
    * invalidation through a PIPE_CONTROL does nothing whatsoever in
    * regards to surface state and binding tables.  In stead, it seems that
    * invalidating the texture cache is what is actually needed.
    *
    * XXX:  As far as we have been able to determine through
    * experimentation, shows that flush the texture cache appears to be
    * sufficient.  The theory here is that all of the sampling/rendering
    * units cache the binding table in the texture cache.  However, we have
    * yet to be able to actually confirm this.
    */
   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
      pc.TextureCacheInvalidationEnable = true;
      pc.ConstantCacheInvalidationEnable = true;
      pc.StateCacheInvalidationEnable = true;
   }
}

static void
add_surface_state_reloc(struct anv_cmd_buffer *cmd_buffer,
                        struct anv_state state,
                        struct anv_bo *bo, uint32_t offset)
{
   const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev;

   VkResult result =
      anv_reloc_list_add(&cmd_buffer->surface_relocs, &cmd_buffer->pool->alloc,
                         state.offset + isl_dev->ss.addr_offset, bo, offset);
   if (result != VK_SUCCESS)
      anv_batch_set_error(&cmd_buffer->batch, result);
}

static void
add_image_relocs(struct anv_cmd_buffer *cmd_buffer,
                 const struct anv_image *image,
                 const uint32_t plane,
                 struct anv_surface_state state)
{
   const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev;

   add_surface_state_reloc(cmd_buffer, state.state,
                           image->planes[plane].bo, state.address);

   if (state.aux_address) {
      VkResult result =
         anv_reloc_list_add(&cmd_buffer->surface_relocs,
                            &cmd_buffer->pool->alloc,
                            state.state.offset + isl_dev->ss.aux_addr_offset,
                            image->planes[plane].bo,
                            state.aux_address);
      if (result != VK_SUCCESS)
         anv_batch_set_error(&cmd_buffer->batch, result);
   }
}

static void
add_image_view_relocs(struct anv_cmd_buffer *cmd_buffer,
                      const struct anv_image_view *image_view,
                      const uint32_t plane,
                      struct anv_surface_state state)
{
   const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev;
   const struct anv_image *image = image_view->image;
   uint32_t image_plane = image_view->planes[plane].image_plane;

   add_surface_state_reloc(cmd_buffer, state.state,
                           image->planes[image_plane].bo, state.address);

   if (state.aux_address) {
      VkResult result =
         anv_reloc_list_add(&cmd_buffer->surface_relocs,
                            &cmd_buffer->pool->alloc,
                            state.state.offset + isl_dev->ss.aux_addr_offset,
                            image->planes[image_plane].bo, state.aux_address);
      if (result != VK_SUCCESS)
         anv_batch_set_error(&cmd_buffer->batch, result);
   }
}

static bool
color_is_zero_one(VkClearColorValue value, enum isl_format format)
{
   if (isl_format_has_int_channel(format)) {
      for (unsigned i = 0; i < 4; i++) {
         if (value.int32[i] != 0 && value.int32[i] != 1)
            return false;
      }
   } else {
      for (unsigned i = 0; i < 4; i++) {
         if (value.float32[i] != 0.0f && value.float32[i] != 1.0f)
            return false;
      }
   }

   return true;
}

static void
color_attachment_compute_aux_usage(struct anv_device * device,
                                   struct anv_cmd_state * cmd_state,
                                   uint32_t att, VkRect2D render_area,
                                   union isl_color_value *fast_clear_color)
{
   struct anv_attachment_state *att_state = &cmd_state->attachments[att];
   struct anv_image_view *iview = cmd_state->framebuffer->attachments[att];

   assert(iview->n_planes == 1);

   if (iview->planes[0].isl.base_array_layer >=
       anv_image_aux_layers(iview->image, VK_IMAGE_ASPECT_COLOR_BIT,
                            iview->planes[0].isl.base_level)) {
      /* There is no aux buffer which corresponds to the level and layer(s)
       * being accessed.
       */
      att_state->aux_usage = ISL_AUX_USAGE_NONE;
      att_state->input_aux_usage = ISL_AUX_USAGE_NONE;
      att_state->fast_clear = false;
      return;
   } else if (iview->image->planes[0].aux_usage == ISL_AUX_USAGE_MCS) {
      att_state->aux_usage = ISL_AUX_USAGE_MCS;
      att_state->input_aux_usage = ISL_AUX_USAGE_MCS;
      att_state->fast_clear = false;
      return;
   } else if (iview->image->planes[0].aux_usage == ISL_AUX_USAGE_CCS_E) {
      att_state->aux_usage = ISL_AUX_USAGE_CCS_E;
      att_state->input_aux_usage = ISL_AUX_USAGE_CCS_E;
   } else {
      att_state->aux_usage = ISL_AUX_USAGE_CCS_D;
      /* From the Sky Lake PRM, RENDER_SURFACE_STATE::AuxiliarySurfaceMode:
       *
       *    "If Number of Multisamples is MULTISAMPLECOUNT_1, AUX_CCS_D
       *    setting is only allowed if Surface Format supported for Fast
       *    Clear. In addition, if the surface is bound to the sampling
       *    engine, Surface Format must be supported for Render Target
       *    Compression for surfaces bound to the sampling engine."
       *
       * In other words, we can only sample from a fast-cleared image if it
       * also supports color compression.
       */
      if (isl_format_supports_ccs_e(&device->info, iview->planes[0].isl.format)) {
         att_state->input_aux_usage = ISL_AUX_USAGE_CCS_D;

         /* While fast-clear resolves and partial resolves are fairly cheap in the
          * case where you render to most of the pixels, full resolves are not
          * because they potentially involve reading and writing the entire
          * framebuffer.  If we can't texture with CCS_E, we should leave it off and
          * limit ourselves to fast clears.
          */
         if (cmd_state->pass->attachments[att].first_subpass_layout ==
             VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL) {
            anv_perf_warn(device->instance, iview->image,
                          "Not temporarily enabling CCS_E.");
         }
      } else {
         att_state->input_aux_usage = ISL_AUX_USAGE_NONE;
      }
   }

   assert(iview->image->planes[0].aux_surface.isl.usage & ISL_SURF_USAGE_CCS_BIT);

   att_state->clear_color_is_zero_one =
      color_is_zero_one(att_state->clear_value.color, iview->planes[0].isl.format);
   att_state->clear_color_is_zero =
      att_state->clear_value.color.uint32[0] == 0 &&
      att_state->clear_value.color.uint32[1] == 0 &&
      att_state->clear_value.color.uint32[2] == 0 &&
      att_state->clear_value.color.uint32[3] == 0;

   if (att_state->pending_clear_aspects == VK_IMAGE_ASPECT_COLOR_BIT) {
      /* Start off assuming fast clears are possible */
      att_state->fast_clear = true;

      /* Potentially, we could do partial fast-clears but doing so has crazy
       * alignment restrictions.  It's easier to just restrict to full size
       * fast clears for now.
       */
      if (render_area.offset.x != 0 ||
          render_area.offset.y != 0 ||
          render_area.extent.width != iview->extent.width ||
          render_area.extent.height != iview->extent.height)
         att_state->fast_clear = false;

      /* On Broadwell and earlier, we can only handle 0/1 clear colors */
      if (GEN_GEN <= 8 && !att_state->clear_color_is_zero_one)
         att_state->fast_clear = false;

      /* We allow fast clears when all aux layers of the miplevel are targeted.
       * See add_fast_clear_state_buffer() for more information. Also, because
       * we only either do a fast clear or a normal clear and not both, this
       * complies with the gen7 restriction of not fast-clearing multiple
       * layers.
       */
      if (cmd_state->framebuffer->layers !=
          anv_image_aux_layers(iview->image, VK_IMAGE_ASPECT_COLOR_BIT,
                               iview->planes[0].isl.base_level)) {
         att_state->fast_clear = false;
         if (GEN_GEN == 7) {
            anv_perf_warn(device->instance, iview->image,
                          "Not fast-clearing the first layer in "
                          "a multi-layer fast clear.");
         }
      }

      /* We only allow fast clears in the GENERAL layout if the auxiliary
       * buffer is always enabled and the fast-clear value is all 0's. See
       * add_fast_clear_state_buffer() for more information.
       */
      if (cmd_state->pass->attachments[att].first_subpass_layout ==
          VK_IMAGE_LAYOUT_GENERAL &&
          (!att_state->clear_color_is_zero ||
           iview->image->planes[0].aux_usage == ISL_AUX_USAGE_NONE)) {
         att_state->fast_clear = false;
      }

      if (att_state->fast_clear) {
         memcpy(fast_clear_color->u32, att_state->clear_value.color.uint32,
                sizeof(fast_clear_color->u32));
      }
   } else {
      att_state->fast_clear = false;
   }
}

static bool
need_input_attachment_state(const struct anv_render_pass_attachment *att)
{
   if (!(att->usage & VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT))
      return false;

   /* We only allocate input attachment states for color surfaces. Compression
    * is not yet enabled for depth textures and stencil doesn't allow
    * compression so we can just use the texture surface state from the view.
    */
   return vk_format_is_color(att->format);
}

/* Transitions a HiZ-enabled depth buffer from one layout to another. Unless
 * the initial layout is undefined, the HiZ buffer and depth buffer will
 * represent the same data at the end of this operation.
 */
static void
transition_depth_buffer(struct anv_cmd_buffer *cmd_buffer,
                        const struct anv_image *image,
                        VkImageLayout initial_layout,
                        VkImageLayout final_layout)
{
   assert(image);

   /* A transition is a no-op if HiZ is not enabled, or if the initial and
    * final layouts are equal.
    *
    * The undefined layout indicates that the user doesn't care about the data
    * that's currently in the buffer. Therefore, a data-preserving resolve
    * operation is not needed.
    */
   if (image->planes[0].aux_usage != ISL_AUX_USAGE_HIZ || initial_layout == final_layout)
      return;

   const bool hiz_enabled = ISL_AUX_USAGE_HIZ ==
      anv_layout_to_aux_usage(&cmd_buffer->device->info, image,
                              VK_IMAGE_ASPECT_DEPTH_BIT, initial_layout);
   const bool enable_hiz = ISL_AUX_USAGE_HIZ ==
      anv_layout_to_aux_usage(&cmd_buffer->device->info, image,
                              VK_IMAGE_ASPECT_DEPTH_BIT, final_layout);

   enum blorp_hiz_op hiz_op;
   if (hiz_enabled && !enable_hiz) {
      hiz_op = BLORP_HIZ_OP_DEPTH_RESOLVE;
   } else if (!hiz_enabled && enable_hiz) {
      hiz_op = BLORP_HIZ_OP_HIZ_RESOLVE;
   } else {
      assert(hiz_enabled == enable_hiz);
      /* If the same buffer will be used, no resolves are necessary. */
      hiz_op = BLORP_HIZ_OP_NONE;
   }

   if (hiz_op != BLORP_HIZ_OP_NONE)
      anv_gen8_hiz_op_resolve(cmd_buffer, image, hiz_op);
}

enum fast_clear_state_field {
   FAST_CLEAR_STATE_FIELD_CLEAR_COLOR,
   FAST_CLEAR_STATE_FIELD_NEEDS_RESOLVE,
};

static inline struct anv_address
get_fast_clear_state_address(const struct anv_device *device,
                             const struct anv_image *image,
                             VkImageAspectFlagBits aspect,
                             unsigned level,
                             enum fast_clear_state_field field)
{
   assert(device && image);
   assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT);
   assert(level < anv_image_aux_levels(image, aspect));

   uint32_t plane = anv_image_aspect_to_plane(image->aspects, aspect);

   /* Refer to the definition of anv_image for the memory layout. */
   uint32_t offset = image->planes[plane].fast_clear_state_offset;

   offset += anv_fast_clear_state_entry_size(device) * level;

   switch (field) {
   case FAST_CLEAR_STATE_FIELD_NEEDS_RESOLVE:
      offset += device->isl_dev.ss.clear_value_size;
      /* Fall-through */
   case FAST_CLEAR_STATE_FIELD_CLEAR_COLOR:
      break;
   }

   assert(offset < image->planes[plane].surface.offset + image->planes[plane].size);

   return (struct anv_address) {
      .bo = image->planes[plane].bo,
      .offset = offset,
   };
}

#define MI_PREDICATE_SRC0  0x2400
#define MI_PREDICATE_SRC1  0x2408

/* Manages the state of an color image subresource to ensure resolves are
 * performed properly.
 */
static void
genX(set_image_needs_resolve)(struct anv_cmd_buffer *cmd_buffer,
                        const struct anv_image *image,
                        VkImageAspectFlagBits aspect,
                        unsigned level, bool needs_resolve)
{
   assert(cmd_buffer && image);
   assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT);
   assert(level < anv_image_aux_levels(image, aspect));

   const struct anv_address resolve_flag_addr =
      get_fast_clear_state_address(cmd_buffer->device, image, aspect, level,
                                   FAST_CLEAR_STATE_FIELD_NEEDS_RESOLVE);

   /* The HW docs say that there is no way to guarantee the completion of
    * the following command. We use it nevertheless because it shows no
    * issues in testing is currently being used in the GL driver.
    */
   anv_batch_emit(&cmd_buffer->batch, GENX(MI_STORE_DATA_IMM), sdi) {
      sdi.Address = resolve_flag_addr;
      sdi.ImmediateData = needs_resolve;
   }
}

static void
genX(load_needs_resolve_predicate)(struct anv_cmd_buffer *cmd_buffer,
                                   const struct anv_image *image,
                                   VkImageAspectFlagBits aspect,
                                   unsigned level)
{
   assert(cmd_buffer && image);
   assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT);
   assert(level < anv_image_aux_levels(image, aspect));

   const struct anv_address resolve_flag_addr =
      get_fast_clear_state_address(cmd_buffer->device, image, aspect, level,
                                   FAST_CLEAR_STATE_FIELD_NEEDS_RESOLVE);

   /* Make the pending predicated resolve a no-op if one is not needed.
    * predicate = do_resolve = resolve_flag != 0;
    */
   emit_lri(&cmd_buffer->batch, MI_PREDICATE_SRC1    , 0);
   emit_lri(&cmd_buffer->batch, MI_PREDICATE_SRC1 + 4, 0);
   emit_lri(&cmd_buffer->batch, MI_PREDICATE_SRC0    , 0);
   emit_lrm(&cmd_buffer->batch, MI_PREDICATE_SRC0 + 4,
            resolve_flag_addr.bo, resolve_flag_addr.offset);
   anv_batch_emit(&cmd_buffer->batch, GENX(MI_PREDICATE), mip) {
      mip.LoadOperation    = LOAD_LOADINV;
      mip.CombineOperation = COMBINE_SET;
      mip.CompareOperation = COMPARE_SRCS_EQUAL;
   }
}

static void
init_fast_clear_state_entry(struct anv_cmd_buffer *cmd_buffer,
                            const struct anv_image *image,
                            VkImageAspectFlagBits aspect,
                            unsigned level)
{
   assert(cmd_buffer && image);
   assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT);
   assert(level < anv_image_aux_levels(image, aspect));

   uint32_t plane = anv_image_aspect_to_plane(image->aspects, aspect);
   enum isl_aux_usage aux_usage = image->planes[plane].aux_usage;

   /* The resolve flag should updated to signify that fast-clear/compression
    * data needs to be removed when leaving the undefined layout. Such data
    * may need to be removed if it would cause accesses to the color buffer
    * to return incorrect data. The fast clear data in CCS_D buffers should
    * be removed because CCS_D isn't enabled all the time.
    */
   genX(set_image_needs_resolve)(cmd_buffer, image, aspect, level,
                                 aux_usage == ISL_AUX_USAGE_NONE);

   /* The fast clear value dword(s) will be copied into a surface state object.
    * Ensure that the restrictions of the fields in the dword(s) are followed.
    *
    * CCS buffers on SKL+ can have any value set for the clear colors.
    */
   if (image->samples == 1 && GEN_GEN >= 9)
      return;

   /* Other combinations of auxiliary buffers and platforms require specific
    * values in the clear value dword(s).
    */
   unsigned i = 0;
   for (; i < cmd_buffer->device->isl_dev.ss.clear_value_size; i += 4) {
      anv_batch_emit(&cmd_buffer->batch, GENX(MI_STORE_DATA_IMM), sdi) {
         sdi.Address =
            get_fast_clear_state_address(cmd_buffer->device, image, aspect, level,
                                         FAST_CLEAR_STATE_FIELD_CLEAR_COLOR);

         if (GEN_GEN >= 9) {
            /* MCS buffers on SKL+ can only have 1/0 clear colors. */
            assert(aux_usage == ISL_AUX_USAGE_MCS);
            sdi.ImmediateData = 0;
         } else if (GEN_VERSIONx10 >= 75) {
            /* Pre-SKL, the dword containing the clear values also contains
             * other fields, so we need to initialize those fields to match the
             * values that would be in a color attachment.
             */
            assert(i == 0);
            sdi.ImmediateData = ISL_CHANNEL_SELECT_RED   << 25 |
                                ISL_CHANNEL_SELECT_GREEN << 22 |
                                ISL_CHANNEL_SELECT_BLUE  << 19 |
                                ISL_CHANNEL_SELECT_ALPHA << 16;
         }  else if (GEN_VERSIONx10 == 70) {
            /* On IVB, the dword containing the clear values also contains
             * other fields that must be zero or can be zero.
             */
            assert(i == 0);
            sdi.ImmediateData = 0;
         }
      }
   }
}

/* Copy the fast-clear value dword(s) between a surface state object and an
 * image's fast clear state buffer.
 */
static void
genX(copy_fast_clear_dwords)(struct anv_cmd_buffer *cmd_buffer,
                             struct anv_state surface_state,
                             const struct anv_image *image,
                             VkImageAspectFlagBits aspect,
                             unsigned level,
                             bool copy_from_surface_state)
{
   assert(cmd_buffer && image);
   assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT);
   assert(level < anv_image_aux_levels(image, aspect));

   struct anv_bo *ss_bo =
      &cmd_buffer->device->surface_state_pool.block_pool.bo;
   uint32_t ss_clear_offset = surface_state.offset +
      cmd_buffer->device->isl_dev.ss.clear_value_offset;
   const struct anv_address entry_addr =
      get_fast_clear_state_address(cmd_buffer->device, image, aspect, level,
                                   FAST_CLEAR_STATE_FIELD_CLEAR_COLOR);
   unsigned copy_size = cmd_buffer->device->isl_dev.ss.clear_value_size;

   if (copy_from_surface_state) {
      genX(cmd_buffer_mi_memcpy)(cmd_buffer, entry_addr.bo, entry_addr.offset,
                                 ss_bo, ss_clear_offset, copy_size);
   } else {
      genX(cmd_buffer_mi_memcpy)(cmd_buffer, ss_bo, ss_clear_offset,
                                 entry_addr.bo, entry_addr.offset, copy_size);

      /* Updating a surface state object may require that the state cache be
       * invalidated. From the SKL PRM, Shared Functions -> State -> State
       * Caching:
       *
       *    Whenever the RENDER_SURFACE_STATE object in memory pointed to by
       *    the Binding Table Pointer (BTP) and Binding Table Index (BTI) is
       *    modified [...], the L1 state cache must be invalidated to ensure
       *    the new surface or sampler state is fetched from system memory.
       *
       * In testing, SKL doesn't actually seem to need this, but HSW does.
       */
      cmd_buffer->state.pending_pipe_bits |=
         ANV_PIPE_STATE_CACHE_INVALIDATE_BIT;
   }
}

/**
 * @brief Transitions a color buffer from one layout to another.
 *
 * See section 6.1.1. Image Layout Transitions of the Vulkan 1.0.50 spec for
 * more information.
 *
 * @param level_count VK_REMAINING_MIP_LEVELS isn't supported.
 * @param layer_count VK_REMAINING_ARRAY_LAYERS isn't supported. For 3D images,
 *                    this represents the maximum layers to transition at each
 *                    specified miplevel.
 */
static void
transition_color_buffer(struct anv_cmd_buffer *cmd_buffer,
                        const struct anv_image *image,
                        VkImageAspectFlagBits aspect,
                        const uint32_t base_level, uint32_t level_count,
                        uint32_t base_layer, uint32_t layer_count,
                        VkImageLayout initial_layout,
                        VkImageLayout final_layout)
{
   /* Validate the inputs. */
   assert(cmd_buffer);
   assert(image && image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT);
   /* These values aren't supported for simplicity's sake. */
   assert(level_count != VK_REMAINING_MIP_LEVELS &&
          layer_count != VK_REMAINING_ARRAY_LAYERS);
   /* Ensure the subresource range is valid. */
   uint64_t last_level_num = base_level + level_count;
   const uint32_t max_depth = anv_minify(image->extent.depth, base_level);
   UNUSED const uint32_t image_layers = MAX2(image->array_size, max_depth);
   assert((uint64_t)base_layer + layer_count  <= image_layers);
   assert(last_level_num <= image->levels);
   /* The spec disallows these final layouts. */
   assert(final_layout != VK_IMAGE_LAYOUT_UNDEFINED &&
          final_layout != VK_IMAGE_LAYOUT_PREINITIALIZED);

   /* No work is necessary if the layout stays the same or if this subresource
    * range lacks auxiliary data.
    */
   if (initial_layout == final_layout)
      return;

   uint32_t plane = anv_image_aspect_to_plane(image->aspects, aspect);

   if (image->planes[plane].shadow_surface.isl.size > 0 &&
       final_layout == VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL) {
      /* This surface is a linear compressed image with a tiled shadow surface
       * for texturing.  The client is about to use it in READ_ONLY_OPTIMAL so
       * we need to ensure the shadow copy is up-to-date.
       */
      assert(image->aspects == VK_IMAGE_ASPECT_COLOR_BIT);
      assert(image->planes[plane].surface.isl.tiling == ISL_TILING_LINEAR);
      assert(image->planes[plane].shadow_surface.isl.tiling != ISL_TILING_LINEAR);
      assert(isl_format_is_compressed(image->planes[plane].surface.isl.format));
      assert(plane == 0);
      anv_image_copy_to_shadow(cmd_buffer, image,
                               base_level, level_count,
                               base_layer, layer_count);
   }

   if (base_layer >= anv_image_aux_layers(image, aspect, base_level))
      return;

   /* A transition of a 3D subresource works on all slices at a time. */
   if (image->type == VK_IMAGE_TYPE_3D) {
      base_layer = 0;
      layer_count = anv_minify(image->extent.depth, base_level);
   }

   /* We're interested in the subresource range subset that has aux data. */
   level_count = MIN2(level_count, anv_image_aux_levels(image, aspect) - base_level);
   layer_count = MIN2(layer_count,
                      anv_image_aux_layers(image, aspect, base_level) - base_layer);
   last_level_num = base_level + level_count;

   /* Record whether or not the layout is undefined. Pre-initialized images
    * with auxiliary buffers have a non-linear layout and are thus undefined.
    */
   assert(image->tiling == VK_IMAGE_TILING_OPTIMAL);
   const bool undef_layout = initial_layout == VK_IMAGE_LAYOUT_UNDEFINED ||
                             initial_layout == VK_IMAGE_LAYOUT_PREINITIALIZED;

   /* Do preparatory work before the resolve operation or return early if no
    * resolve is actually needed.
    */
   if (undef_layout) {
      /* A subresource in the undefined layout may have been aliased and
       * populated with any arrangement of bits. Therefore, we must initialize
       * the related aux buffer and clear buffer entry with desirable values.
       *
       * Initialize the relevant clear buffer entries.
       */
      for (unsigned level = base_level; level < last_level_num; level++)
         init_fast_clear_state_entry(cmd_buffer, image, aspect, level);

      /* Initialize the aux buffers to enable correct rendering. This operation
       * requires up to two steps: one to rid the aux buffer of data that may
       * cause GPU hangs, and another to ensure that writes done without aux
       * will be visible to reads done with aux.
       *
       * Having an aux buffer with invalid data is possible for CCS buffers
       * SKL+ and for MCS buffers with certain sample counts (2x and 8x). One
       * easy way to get to a valid state is to fast-clear the specified range.
       *
       * Even for MCS buffers that have sample counts that don't require
       * certain bits to be reserved (4x and 8x), we're unsure if the hardware
       * will be okay with the sample mappings given by the undefined buffer.
       * We don't have any data to show that this is a problem, but we want to
       * avoid causing difficult-to-debug problems.
       */
      if ((GEN_GEN >= 9 && image->samples == 1) || image->samples > 1) {
         if (image->samples == 4 || image->samples == 16) {
            anv_perf_warn(cmd_buffer->device->instance, image,
                          "Doing a potentially unnecessary fast-clear to "
                          "define an MCS buffer.");
         }

         anv_image_fast_clear(cmd_buffer, image, aspect,
                              base_level, level_count,
                              base_layer, layer_count);
      }
      /* At this point, some elements of the CCS buffer may have the fast-clear
       * bit-arrangement. As the user writes to a subresource, we need to have
       * the associated CCS elements enter the ambiguated state. This enables
       * reads (implicit or explicit) to reflect the user-written data instead
       * of the clear color. The only time such elements will not change their
       * state as described above, is in a final layout that doesn't have CCS
       * enabled. In this case, we must force the associated CCS buffers of the
       * specified range to enter the ambiguated state in advance.
       */
      if (image->samples == 1 &&
          image->planes[plane].aux_usage != ISL_AUX_USAGE_CCS_E &&
          final_layout != VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL) {
         /* The CCS_D buffer may not be enabled in the final layout. Continue
          * executing this function to perform a resolve.
          */
          anv_perf_warn(cmd_buffer->device->instance, image,
                        "Performing an additional resolve for CCS_D layout "
                        "transition. Consider always leaving it on or "
                        "performing an ambiguation pass.");
      } else {
         /* Writes in the final layout will be aware of the auxiliary buffer.
          * In addition, the clear buffer entries and the auxiliary buffers
          * have been populated with values that will result in correct
          * rendering.
          */
         return;
      }
   } else if (initial_layout != VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL) {
      /* Resolves are only necessary if the subresource may contain blocks
       * fast-cleared to values unsupported in other layouts. This only occurs
       * if the initial layout is COLOR_ATTACHMENT_OPTIMAL.
       */
      return;
   } else if (image->samples > 1) {
      /* MCS buffers don't need resolving. */
      return;
   }

   /* Perform a resolve to synchronize data between the main and aux buffer.
    * Before we begin, we must satisfy the cache flushing requirement specified
    * in the Sky Lake PRM Vol. 7, "MCS Buffer for Render Target(s)":
    *
    *    Any transition from any value in {Clear, Render, Resolve} to a
    *    different value in {Clear, Render, Resolve} requires end of pipe
    *    synchronization.
    *
    * We perform a flush of the write cache before and after the clear and
    * resolve operations to meet this requirement.
    *
    * Unlike other drawing, fast clear operations are not properly
    * synchronized. The first PIPE_CONTROL here likely ensures that the
    * contents of the previous render or clear hit the render target before we
    * resolve and the second likely ensures that the resolve is complete before
    * we do any more rendering or clearing.
    */
   cmd_buffer->state.pending_pipe_bits |=
      ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT | ANV_PIPE_CS_STALL_BIT;

   for (uint32_t level = base_level; level < last_level_num; level++) {

      /* The number of layers changes at each 3D miplevel. */
      if (image->type == VK_IMAGE_TYPE_3D) {
         layer_count = MIN2(layer_count, anv_image_aux_layers(image, aspect, level));
      }

      genX(load_needs_resolve_predicate)(cmd_buffer, image, aspect, level);

      enum isl_aux_usage aux_usage =
         image->planes[plane].aux_usage == ISL_AUX_USAGE_NONE ?
         ISL_AUX_USAGE_CCS_D : image->planes[plane].aux_usage;

      /* Create a surface state with the right clear color and perform the
       * resolve.
       */
      struct anv_surface_state surface_state;
      surface_state.state = anv_cmd_buffer_alloc_surface_state(cmd_buffer);
      anv_image_fill_surface_state(cmd_buffer->device,
                                   image, VK_IMAGE_ASPECT_COLOR_BIT,
                                   &(struct isl_view) {
                                      .format = image->planes[plane].surface.isl.format,
                                      .swizzle = ISL_SWIZZLE_IDENTITY,
                                      .base_level = level,
                                      .levels = 1,
                                      .base_array_layer = base_layer,
                                      .array_len = layer_count,
                                   },
                                   ISL_SURF_USAGE_RENDER_TARGET_BIT,
                                   aux_usage, NULL, 0,
                                   &surface_state, NULL);
      add_image_relocs(cmd_buffer, image, 0, surface_state);
      genX(copy_fast_clear_dwords)(cmd_buffer, surface_state.state, image,
                                   aspect, level, false /* copy to ss */);
      anv_ccs_resolve(cmd_buffer, surface_state.state, image,
                      aspect, level, layer_count,
                      image->planes[plane].aux_usage == ISL_AUX_USAGE_CCS_E ?
                      BLORP_FAST_CLEAR_OP_RESOLVE_PARTIAL :
                      BLORP_FAST_CLEAR_OP_RESOLVE_FULL);

      genX(set_image_needs_resolve)(cmd_buffer, image, aspect, level, false);
   }

   cmd_buffer->state.pending_pipe_bits |=
      ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT | ANV_PIPE_CS_STALL_BIT;
}

/**
 * Setup anv_cmd_state::attachments for vkCmdBeginRenderPass.
 */
static VkResult
genX(cmd_buffer_setup_attachments)(struct anv_cmd_buffer *cmd_buffer,
                                   struct anv_render_pass *pass,
                                   const VkRenderPassBeginInfo *begin)
{
   const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev;
   struct anv_cmd_state *state = &cmd_buffer->state;

   vk_free(&cmd_buffer->pool->alloc, state->attachments);

   if (pass->attachment_count > 0) {
      state->attachments = vk_alloc(&cmd_buffer->pool->alloc,
                                    pass->attachment_count *
                                         sizeof(state->attachments[0]),
                                    8, VK_SYSTEM_ALLOCATION_SCOPE_OBJECT);
      if (state->attachments == NULL) {
         /* Propagate VK_ERROR_OUT_OF_HOST_MEMORY to vkEndCommandBuffer */
         return anv_batch_set_error(&cmd_buffer->batch,
                                    VK_ERROR_OUT_OF_HOST_MEMORY);
      }
   } else {
      state->attachments = NULL;
   }

   /* Reserve one for the NULL state. */
   unsigned num_states = 1;
   for (uint32_t i = 0; i < pass->attachment_count; ++i) {
      if (vk_format_is_color(pass->attachments[i].format))
         num_states++;

      if (need_input_attachment_state(&pass->attachments[i]))
         num_states++;
   }

   const uint32_t ss_stride = align_u32(isl_dev->ss.size, isl_dev->ss.align);
   state->render_pass_states =
      anv_state_stream_alloc(&cmd_buffer->surface_state_stream,
                             num_states * ss_stride, isl_dev->ss.align);

   struct anv_state next_state = state->render_pass_states;
   next_state.alloc_size = isl_dev->ss.size;

   state->null_surface_state = next_state;
   next_state.offset += ss_stride;
   next_state.map += ss_stride;

   for (uint32_t i = 0; i < pass->attachment_count; ++i) {
      if (vk_format_is_color(pass->attachments[i].format)) {
         state->attachments[i].color.state = next_state;
         next_state.offset += ss_stride;
         next_state.map += ss_stride;
      }

      if (need_input_attachment_state(&pass->attachments[i])) {
         state->attachments[i].input.state = next_state;
         next_state.offset += ss_stride;
         next_state.map += ss_stride;
      }
   }
   assert(next_state.offset == state->render_pass_states.offset +
                               state->render_pass_states.alloc_size);

   if (begin) {
      ANV_FROM_HANDLE(anv_framebuffer, framebuffer, begin->framebuffer);
      assert(pass->attachment_count == framebuffer->attachment_count);

      isl_null_fill_state(isl_dev, state->null_surface_state.map,
                          isl_extent3d(framebuffer->width,
                                       framebuffer->height,
                                       framebuffer->layers));

      for (uint32_t i = 0; i < pass->attachment_count; ++i) {
         struct anv_render_pass_attachment *att = &pass->attachments[i];
         VkImageAspectFlags att_aspects = vk_format_aspects(att->format);
         VkImageAspectFlags clear_aspects = 0;

         if (att_aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT) {
            /* color attachment */
            if (att->load_op == VK_ATTACHMENT_LOAD_OP_CLEAR) {
               clear_aspects |= VK_IMAGE_ASPECT_COLOR_BIT;
            }
         } else {
            /* depthstencil attachment */
            if ((att_aspects & VK_IMAGE_ASPECT_DEPTH_BIT) &&
                att->load_op == VK_ATTACHMENT_LOAD_OP_CLEAR) {
               clear_aspects |= VK_IMAGE_ASPECT_DEPTH_BIT;
            }
            if ((att_aspects & VK_IMAGE_ASPECT_STENCIL_BIT) &&
                att->stencil_load_op == VK_ATTACHMENT_LOAD_OP_CLEAR) {
               clear_aspects |= VK_IMAGE_ASPECT_STENCIL_BIT;
            }
         }

         state->attachments[i].current_layout = att->initial_layout;
         state->attachments[i].pending_clear_aspects = clear_aspects;
         if (clear_aspects)
            state->attachments[i].clear_value = begin->pClearValues[i];

         struct anv_image_view *iview = framebuffer->attachments[i];
         anv_assert(iview->vk_format == att->format);
         anv_assert(iview->n_planes == 1);

         union isl_color_value clear_color = { .u32 = { 0, } };
         if (att_aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT) {
            assert(att_aspects == VK_IMAGE_ASPECT_COLOR_BIT);
            color_attachment_compute_aux_usage(cmd_buffer->device,
                                               state, i, begin->renderArea,
                                               &clear_color);

            anv_image_fill_surface_state(cmd_buffer->device,
                                         iview->image,
                                         VK_IMAGE_ASPECT_COLOR_BIT,
                                         &iview->planes[0].isl,
                                         ISL_SURF_USAGE_RENDER_TARGET_BIT,
                                         state->attachments[i].aux_usage,
                                         &clear_color,
                                         0,
                                         &state->attachments[i].color,
                                         NULL);

            add_image_view_relocs(cmd_buffer, iview, 0,
                                  state->attachments[i].color);
         } else {
            /* This field will be initialized after the first subpass
             * transition.
             */
            state->attachments[i].aux_usage = ISL_AUX_USAGE_NONE;

            state->attachments[i].input_aux_usage = ISL_AUX_USAGE_NONE;
         }

         if (need_input_attachment_state(&pass->attachments[i])) {
            anv_image_fill_surface_state(cmd_buffer->device,
                                         iview->image,
                                         VK_IMAGE_ASPECT_COLOR_BIT,
                                         &iview->planes[0].isl,
                                         ISL_SURF_USAGE_TEXTURE_BIT,
                                         state->attachments[i].input_aux_usage,
                                         &clear_color,
                                         0,
                                         &state->attachments[i].input,
                                         NULL);

            add_image_view_relocs(cmd_buffer, iview, 0,
                                  state->attachments[i].input);
         }
      }
   }

   return VK_SUCCESS;
}

VkResult
genX(BeginCommandBuffer)(
    VkCommandBuffer                             commandBuffer,
    const VkCommandBufferBeginInfo*             pBeginInfo)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);

   /* If this is the first vkBeginCommandBuffer, we must *initialize* the
    * command buffer's state. Otherwise, we must *reset* its state. In both
    * cases we reset it.
    *
    * From the Vulkan 1.0 spec:
    *
    *    If a command buffer is in the executable state and the command buffer
    *    was allocated from a command pool with the
    *    VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT flag set, then
    *    vkBeginCommandBuffer implicitly resets the command buffer, behaving
    *    as if vkResetCommandBuffer had been called with
    *    VK_COMMAND_BUFFER_RESET_RELEASE_RESOURCES_BIT not set. It then puts
    *    the command buffer in the recording state.
    */
   anv_cmd_buffer_reset(cmd_buffer);

   cmd_buffer->usage_flags = pBeginInfo->flags;

   assert(cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_SECONDARY ||
          !(cmd_buffer->usage_flags & VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT));

   genX(cmd_buffer_emit_state_base_address)(cmd_buffer);

   /* We sometimes store vertex data in the dynamic state buffer for blorp
    * operations and our dynamic state stream may re-use data from previous
    * command buffers.  In order to prevent stale cache data, we flush the VF
    * cache.  We could do this on every blorp call but that's not really
    * needed as all of the data will get written by the CPU prior to the GPU
    * executing anything.  The chances are fairly high that they will use
    * blorp at least once per primary command buffer so it shouldn't be
    * wasted.
    */
   if (cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_PRIMARY)
      cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_VF_CACHE_INVALIDATE_BIT;

   VkResult result = VK_SUCCESS;
   if (cmd_buffer->usage_flags &
       VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT) {
      assert(pBeginInfo->pInheritanceInfo);
      cmd_buffer->state.pass =
         anv_render_pass_from_handle(pBeginInfo->pInheritanceInfo->renderPass);
      cmd_buffer->state.subpass =
         &cmd_buffer->state.pass->subpasses[pBeginInfo->pInheritanceInfo->subpass];
      cmd_buffer->state.framebuffer = NULL;

      result = genX(cmd_buffer_setup_attachments)(cmd_buffer,
                                                  cmd_buffer->state.pass, NULL);

      cmd_buffer->state.dirty |= ANV_CMD_DIRTY_RENDER_TARGETS;
   }

   return result;
}

VkResult
genX(EndCommandBuffer)(
    VkCommandBuffer                             commandBuffer)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);

   if (anv_batch_has_error(&cmd_buffer->batch))
      return cmd_buffer->batch.status;

   /* We want every command buffer to start with the PMA fix in a known state,
    * so we disable it at the end of the command buffer.
    */
   genX(cmd_buffer_enable_pma_fix)(cmd_buffer, false);

   genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer);

   anv_cmd_buffer_end_batch_buffer(cmd_buffer);

   return VK_SUCCESS;
}

void
genX(CmdExecuteCommands)(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    commandBufferCount,
    const VkCommandBuffer*                      pCmdBuffers)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, primary, commandBuffer);

   assert(primary->level == VK_COMMAND_BUFFER_LEVEL_PRIMARY);

   if (anv_batch_has_error(&primary->batch))
      return;

   /* The secondary command buffers will assume that the PMA fix is disabled
    * when they begin executing.  Make sure this is true.
    */
   genX(cmd_buffer_enable_pma_fix)(primary, false);

   /* The secondary command buffer doesn't know which textures etc. have been
    * flushed prior to their execution.  Apply those flushes now.
    */
   genX(cmd_buffer_apply_pipe_flushes)(primary);

   for (uint32_t i = 0; i < commandBufferCount; i++) {
      ANV_FROM_HANDLE(anv_cmd_buffer, secondary, pCmdBuffers[i]);

      assert(secondary->level == VK_COMMAND_BUFFER_LEVEL_SECONDARY);
      assert(!anv_batch_has_error(&secondary->batch));

      if (secondary->usage_flags &
          VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT) {
         /* If we're continuing a render pass from the primary, we need to
          * copy the surface states for the current subpass into the storage
          * we allocated for them in BeginCommandBuffer.
          */
         struct anv_bo *ss_bo =
            &primary->device->surface_state_pool.block_pool.bo;
         struct anv_state src_state = primary->state.render_pass_states;
         struct anv_state dst_state = secondary->state.render_pass_states;
         assert(src_state.alloc_size == dst_state.alloc_size);

         genX(cmd_buffer_so_memcpy)(primary, ss_bo, dst_state.offset,
                                    ss_bo, src_state.offset,
                                    src_state.alloc_size);
      }

      anv_cmd_buffer_add_secondary(primary, secondary);
   }

   /* Each of the secondary command buffers will use its own state base
    * address.  We need to re-emit state base address for the primary after
    * all of the secondaries are done.
    *
    * TODO: Maybe we want to make this a dirty bit to avoid extra state base
    * address calls?
    */
   genX(cmd_buffer_emit_state_base_address)(primary);
}

#define IVB_L3SQCREG1_SQGHPCI_DEFAULT     0x00730000
#define VLV_L3SQCREG1_SQGHPCI_DEFAULT     0x00d30000
#define HSW_L3SQCREG1_SQGHPCI_DEFAULT     0x00610000

/**
 * Program the hardware to use the specified L3 configuration.
 */
void
genX(cmd_buffer_config_l3)(struct anv_cmd_buffer *cmd_buffer,
                           const struct gen_l3_config *cfg)
{
   assert(cfg);
   if (cfg == cmd_buffer->state.current_l3_config)
      return;

   if (unlikely(INTEL_DEBUG & DEBUG_L3)) {
      fprintf(stderr, "L3 config transition: ");
      gen_dump_l3_config(cfg, stderr);
   }

   const bool has_slm = cfg->n[GEN_L3P_SLM];

   /* According to the hardware docs, the L3 partitioning can only be changed
    * while the pipeline is completely drained and the caches are flushed,
    * which involves a first PIPE_CONTROL flush which stalls the pipeline...
    */
   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
      pc.DCFlushEnable = true;
      pc.PostSyncOperation = NoWrite;
      pc.CommandStreamerStallEnable = true;
   }

   /* ...followed by a second pipelined PIPE_CONTROL that initiates
    * invalidation of the relevant caches.  Note that because RO invalidation
    * happens at the top of the pipeline (i.e. right away as the PIPE_CONTROL
    * command is processed by the CS) we cannot combine it with the previous
    * stalling flush as the hardware documentation suggests, because that
    * would cause the CS to stall on previous rendering *after* RO
    * invalidation and wouldn't prevent the RO caches from being polluted by
    * concurrent rendering before the stall completes.  This intentionally
    * doesn't implement the SKL+ hardware workaround suggesting to enable CS
    * stall on PIPE_CONTROLs with the texture cache invalidation bit set for
    * GPGPU workloads because the previous and subsequent PIPE_CONTROLs
    * already guarantee that there is no concurrent GPGPU kernel execution
    * (see SKL HSD 2132585).
    */
   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
      pc.TextureCacheInvalidationEnable = true;
      pc.ConstantCacheInvalidationEnable = true;
      pc.InstructionCacheInvalidateEnable = true;
      pc.StateCacheInvalidationEnable = true;
      pc.PostSyncOperation = NoWrite;
   }

   /* Now send a third stalling flush to make sure that invalidation is
    * complete when the L3 configuration registers are modified.
    */
   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
      pc.DCFlushEnable = true;
      pc.PostSyncOperation = NoWrite;
      pc.CommandStreamerStallEnable = true;
   }

#if GEN_GEN >= 8

   assert(!cfg->n[GEN_L3P_IS] && !cfg->n[GEN_L3P_C] && !cfg->n[GEN_L3P_T]);

   uint32_t l3cr;
   anv_pack_struct(&l3cr, GENX(L3CNTLREG),
                   .SLMEnable = has_slm,
                   .URBAllocation = cfg->n[GEN_L3P_URB],
                   .ROAllocation = cfg->n[GEN_L3P_RO],
                   .DCAllocation = cfg->n[GEN_L3P_DC],
                   .AllAllocation = cfg->n[GEN_L3P_ALL]);

   /* Set up the L3 partitioning. */
   emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG_num), l3cr);

#else

   const bool has_dc = cfg->n[GEN_L3P_DC] || cfg->n[GEN_L3P_ALL];
   const bool has_is = cfg->n[GEN_L3P_IS] || cfg->n[GEN_L3P_RO] ||
                       cfg->n[GEN_L3P_ALL];
   const bool has_c = cfg->n[GEN_L3P_C] || cfg->n[GEN_L3P_RO] ||
                      cfg->n[GEN_L3P_ALL];
   const bool has_t = cfg->n[GEN_L3P_T] || cfg->n[GEN_L3P_RO] ||
                      cfg->n[GEN_L3P_ALL];

   assert(!cfg->n[GEN_L3P_ALL]);

   /* When enabled SLM only uses a portion of the L3 on half of the banks,
    * the matching space on the remaining banks has to be allocated to a
    * client (URB for all validated configurations) set to the
    * lower-bandwidth 2-bank address hashing mode.
    */
   const struct gen_device_info *devinfo = &cmd_buffer->device->info;
   const bool urb_low_bw = has_slm && !devinfo->is_baytrail;
   assert(!urb_low_bw || cfg->n[GEN_L3P_URB] == cfg->n[GEN_L3P_SLM]);

   /* Minimum number of ways that can be allocated to the URB. */
   MAYBE_UNUSED const unsigned n0_urb = devinfo->is_baytrail ? 32 : 0;
   assert(cfg->n[GEN_L3P_URB] >= n0_urb);

   uint32_t l3sqcr1, l3cr2, l3cr3;
   anv_pack_struct(&l3sqcr1, GENX(L3SQCREG1),
                   .ConvertDC_UC = !has_dc,
                   .ConvertIS_UC = !has_is,
                   .ConvertC_UC = !has_c,
                   .ConvertT_UC = !has_t);
   l3sqcr1 |=
      GEN_IS_HASWELL ? HSW_L3SQCREG1_SQGHPCI_DEFAULT :
      devinfo->is_baytrail ? VLV_L3SQCREG1_SQGHPCI_DEFAULT :
      IVB_L3SQCREG1_SQGHPCI_DEFAULT;

   anv_pack_struct(&l3cr2, GENX(L3CNTLREG2),
                   .SLMEnable = has_slm,
                   .URBLowBandwidth = urb_low_bw,
                   .URBAllocation = cfg->n[GEN_L3P_URB] - n0_urb,
#if !GEN_IS_HASWELL
                   .ALLAllocation = cfg->n[GEN_L3P_ALL],
#endif
                   .ROAllocation = cfg->n[GEN_L3P_RO],
                   .DCAllocation = cfg->n[GEN_L3P_DC]);

   anv_pack_struct(&l3cr3, GENX(L3CNTLREG3),
                   .ISAllocation = cfg->n[GEN_L3P_IS],
                   .ISLowBandwidth = 0,
                   .CAllocation = cfg->n[GEN_L3P_C],
                   .CLowBandwidth = 0,
                   .TAllocation = cfg->n[GEN_L3P_T],
                   .TLowBandwidth = 0);

   /* Set up the L3 partitioning. */
   emit_lri(&cmd_buffer->batch, GENX(L3SQCREG1_num), l3sqcr1);
   emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG2_num), l3cr2);
   emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG3_num), l3cr3);

#if GEN_IS_HASWELL
   if (cmd_buffer->device->instance->physicalDevice.cmd_parser_version >= 4) {
      /* Enable L3 atomics on HSW if we have a DC partition, otherwise keep
       * them disabled to avoid crashing the system hard.
       */
      uint32_t scratch1, chicken3;
      anv_pack_struct(&scratch1, GENX(SCRATCH1),
                      .L3AtomicDisable = !has_dc);
      anv_pack_struct(&chicken3, GENX(CHICKEN3),
                      .L3AtomicDisableMask = true,
                      .L3AtomicDisable = !has_dc);
      emit_lri(&cmd_buffer->batch, GENX(SCRATCH1_num), scratch1);
      emit_lri(&cmd_buffer->batch, GENX(CHICKEN3_num), chicken3);
   }
#endif

#endif

   cmd_buffer->state.current_l3_config = cfg;
}

void
genX(cmd_buffer_apply_pipe_flushes)(struct anv_cmd_buffer *cmd_buffer)
{
   enum anv_pipe_bits bits = cmd_buffer->state.pending_pipe_bits;

   /* Flushes are pipelined while invalidations are handled immediately.
    * Therefore, if we're flushing anything then we need to schedule a stall
    * before any invalidations can happen.
    */
   if (bits & ANV_PIPE_FLUSH_BITS)
      bits |= ANV_PIPE_NEEDS_CS_STALL_BIT;

   /* If we're going to do an invalidate and we have a pending CS stall that
    * has yet to be resolved, we do the CS stall now.
    */
   if ((bits & ANV_PIPE_INVALIDATE_BITS) &&
       (bits & ANV_PIPE_NEEDS_CS_STALL_BIT)) {
      bits |= ANV_PIPE_CS_STALL_BIT;
      bits &= ~ANV_PIPE_NEEDS_CS_STALL_BIT;
   }

   if (bits & (ANV_PIPE_FLUSH_BITS | ANV_PIPE_CS_STALL_BIT)) {
      anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
         pipe.DepthCacheFlushEnable = bits & ANV_PIPE_DEPTH_CACHE_FLUSH_BIT;
         pipe.DCFlushEnable = bits & ANV_PIPE_DATA_CACHE_FLUSH_BIT;
         pipe.RenderTargetCacheFlushEnable =
            bits & ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT;

         pipe.DepthStallEnable = bits & ANV_PIPE_DEPTH_STALL_BIT;
         pipe.CommandStreamerStallEnable = bits & ANV_PIPE_CS_STALL_BIT;
         pipe.StallAtPixelScoreboard = bits & ANV_PIPE_STALL_AT_SCOREBOARD_BIT;

         /*
          * According to the Broadwell documentation, any PIPE_CONTROL with the
          * "Command Streamer Stall" bit set must also have another bit set,
          * with five different options:
          *
          *  - Render Target Cache Flush
          *  - Depth Cache Flush
          *  - Stall at Pixel Scoreboard
          *  - Post-Sync Operation
          *  - Depth Stall
          *  - DC Flush Enable
          *
          * I chose "Stall at Pixel Scoreboard" since that's what we use in
          * mesa and it seems to work fine. The choice is fairly arbitrary.
          */
         if ((bits & ANV_PIPE_CS_STALL_BIT) &&
             !(bits & (ANV_PIPE_FLUSH_BITS | ANV_PIPE_DEPTH_STALL_BIT |
                       ANV_PIPE_STALL_AT_SCOREBOARD_BIT)))
            pipe.StallAtPixelScoreboard = true;
      }

      bits &= ~(ANV_PIPE_FLUSH_BITS | ANV_PIPE_CS_STALL_BIT);
   }

   if (bits & ANV_PIPE_INVALIDATE_BITS) {
      anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
         pipe.StateCacheInvalidationEnable =
            bits & ANV_PIPE_STATE_CACHE_INVALIDATE_BIT;
         pipe.ConstantCacheInvalidationEnable =
            bits & ANV_PIPE_CONSTANT_CACHE_INVALIDATE_BIT;
         pipe.VFCacheInvalidationEnable =
            bits & ANV_PIPE_VF_CACHE_INVALIDATE_BIT;
         pipe.TextureCacheInvalidationEnable =
            bits & ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT;
         pipe.InstructionCacheInvalidateEnable =
            bits & ANV_PIPE_INSTRUCTION_CACHE_INVALIDATE_BIT;
      }

      bits &= ~ANV_PIPE_INVALIDATE_BITS;
   }

   cmd_buffer->state.pending_pipe_bits = bits;
}

void genX(CmdPipelineBarrier)(
    VkCommandBuffer                             commandBuffer,
    VkPipelineStageFlags                        srcStageMask,
    VkPipelineStageFlags                        destStageMask,
    VkBool32                                    byRegion,
    uint32_t                                    memoryBarrierCount,
    const VkMemoryBarrier*                      pMemoryBarriers,
    uint32_t                                    bufferMemoryBarrierCount,
    const VkBufferMemoryBarrier*                pBufferMemoryBarriers,
    uint32_t                                    imageMemoryBarrierCount,
    const VkImageMemoryBarrier*                 pImageMemoryBarriers)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);

   /* XXX: Right now, we're really dumb and just flush whatever categories
    * the app asks for.  One of these days we may make this a bit better
    * but right now that's all the hardware allows for in most areas.
    */
   VkAccessFlags src_flags = 0;
   VkAccessFlags dst_flags = 0;

   for (uint32_t i = 0; i < memoryBarrierCount; i++) {
      src_flags |= pMemoryBarriers[i].srcAccessMask;
      dst_flags |= pMemoryBarriers[i].dstAccessMask;
   }

   for (uint32_t i = 0; i < bufferMemoryBarrierCount; i++) {
      src_flags |= pBufferMemoryBarriers[i].srcAccessMask;
      dst_flags |= pBufferMemoryBarriers[i].dstAccessMask;
   }

   for (uint32_t i = 0; i < imageMemoryBarrierCount; i++) {
      src_flags |= pImageMemoryBarriers[i].srcAccessMask;
      dst_flags |= pImageMemoryBarriers[i].dstAccessMask;
      ANV_FROM_HANDLE(anv_image, image, pImageMemoryBarriers[i].image);
      const VkImageSubresourceRange *range =
         &pImageMemoryBarriers[i].subresourceRange;

      if (range->aspectMask & VK_IMAGE_ASPECT_DEPTH_BIT) {
         transition_depth_buffer(cmd_buffer, image,
                                 pImageMemoryBarriers[i].oldLayout,
                                 pImageMemoryBarriers[i].newLayout);
      } else if (range->aspectMask & VK_IMAGE_ASPECT_ANY_COLOR_BIT) {
         VkImageAspectFlags color_aspects =
            anv_image_expand_aspects(image, range->aspectMask);
         uint32_t aspect_bit;

         anv_foreach_image_aspect_bit(aspect_bit, image, color_aspects) {
            transition_color_buffer(cmd_buffer, image, 1UL << aspect_bit,
                                    range->baseMipLevel,
                                    anv_get_levelCount(image, range),
                                    range->baseArrayLayer,
                                    anv_get_layerCount(image, range),
                                    pImageMemoryBarriers[i].oldLayout,
                                    pImageMemoryBarriers[i].newLayout);
         }
      }
   }

   cmd_buffer->state.pending_pipe_bits |=
      anv_pipe_flush_bits_for_access_flags(src_flags) |
      anv_pipe_invalidate_bits_for_access_flags(dst_flags);
}

static void
cmd_buffer_alloc_push_constants(struct anv_cmd_buffer *cmd_buffer)
{
   VkShaderStageFlags stages = cmd_buffer->state.pipeline->active_stages;

   /* In order to avoid thrash, we assume that vertex and fragment stages
    * always exist.  In the rare case where one is missing *and* the other
    * uses push concstants, this may be suboptimal.  However, avoiding stalls
    * seems more important.
    */
   stages |= VK_SHADER_STAGE_FRAGMENT_BIT | VK_SHADER_STAGE_VERTEX_BIT;

   if (stages == cmd_buffer->state.push_constant_stages)
      return;

#if GEN_GEN >= 8
   const unsigned push_constant_kb = 32;
#elif GEN_IS_HASWELL
   const unsigned push_constant_kb = cmd_buffer->device->info.gt == 3 ? 32 : 16;
#else
   const unsigned push_constant_kb = 16;
#endif

   const unsigned num_stages =
      _mesa_bitcount(stages & VK_SHADER_STAGE_ALL_GRAPHICS);
   unsigned size_per_stage = push_constant_kb / num_stages;

   /* Broadwell+ and Haswell gt3 require that the push constant sizes be in
    * units of 2KB.  Incidentally, these are the same platforms that have
    * 32KB worth of push constant space.
    */
   if (push_constant_kb == 32)
      size_per_stage &= ~1u;

   uint32_t kb_used = 0;
   for (int i = MESA_SHADER_VERTEX; i < MESA_SHADER_FRAGMENT; i++) {
      unsigned push_size = (stages & (1 << i)) ? size_per_stage : 0;
      anv_batch_emit(&cmd_buffer->batch,
                     GENX(3DSTATE_PUSH_CONSTANT_ALLOC_VS), alloc) {
         alloc._3DCommandSubOpcode  = 18 + i;
         alloc.ConstantBufferOffset = (push_size > 0) ? kb_used : 0;
         alloc.ConstantBufferSize   = push_size;
      }
      kb_used += push_size;
   }

   anv_batch_emit(&cmd_buffer->batch,
                  GENX(3DSTATE_PUSH_CONSTANT_ALLOC_PS), alloc) {
      alloc.ConstantBufferOffset = kb_used;
      alloc.ConstantBufferSize = push_constant_kb - kb_used;
   }

   cmd_buffer->state.push_constant_stages = stages;

   /* From the BDW PRM for 3DSTATE_PUSH_CONSTANT_ALLOC_VS:
    *
    *    "The 3DSTATE_CONSTANT_VS must be reprogrammed prior to
    *    the next 3DPRIMITIVE command after programming the
    *    3DSTATE_PUSH_CONSTANT_ALLOC_VS"
    *
    * Since 3DSTATE_PUSH_CONSTANT_ALLOC_VS is programmed as part of
    * pipeline setup, we need to dirty push constants.
    */
   cmd_buffer->state.push_constants_dirty |= VK_SHADER_STAGE_ALL_GRAPHICS;
}

static VkResult
emit_binding_table(struct anv_cmd_buffer *cmd_buffer,
                   gl_shader_stage stage,
                   struct anv_state *bt_state)
{
   struct anv_subpass *subpass = cmd_buffer->state.subpass;
   struct anv_pipeline *pipeline;
   uint32_t bias, state_offset;

   switch (stage) {
   case  MESA_SHADER_COMPUTE:
      pipeline = cmd_buffer->state.compute_pipeline;
      bias = 1;
      break;
   default:
      pipeline = cmd_buffer->state.pipeline;
      bias = 0;
      break;
   }

   if (!anv_pipeline_has_stage(pipeline, stage)) {
      *bt_state = (struct anv_state) { 0, };
      return VK_SUCCESS;
   }

   struct anv_pipeline_bind_map *map = &pipeline->shaders[stage]->bind_map;
   if (bias + map->surface_count == 0) {
      *bt_state = (struct anv_state) { 0, };
      return VK_SUCCESS;
   }

   *bt_state = anv_cmd_buffer_alloc_binding_table(cmd_buffer,
                                                  bias + map->surface_count,
                                                  &state_offset);
   uint32_t *bt_map = bt_state->map;

   if (bt_state->map == NULL)
      return VK_ERROR_OUT_OF_DEVICE_MEMORY;

   if (stage == MESA_SHADER_COMPUTE &&
       get_cs_prog_data(cmd_buffer->state.compute_pipeline)->uses_num_work_groups) {
      struct anv_bo *bo = cmd_buffer->state.num_workgroups_bo;
      uint32_t bo_offset = cmd_buffer->state.num_workgroups_offset;

      struct anv_state surface_state;
      surface_state =
         anv_cmd_buffer_alloc_surface_state(cmd_buffer);

      const enum isl_format format =
         anv_isl_format_for_descriptor_type(VK_DESCRIPTOR_TYPE_STORAGE_BUFFER);
      anv_fill_buffer_surface_state(cmd_buffer->device, surface_state,
                                    format, bo_offset, 12, 1);

      bt_map[0] = surface_state.offset + state_offset;
      add_surface_state_reloc(cmd_buffer, surface_state, bo, bo_offset);
   }

   if (map->surface_count == 0)
      goto out;

   if (map->image_count > 0) {
      VkResult result =
         anv_cmd_buffer_ensure_push_constant_field(cmd_buffer, stage, images);
      if (result != VK_SUCCESS)
         return result;

      cmd_buffer->state.push_constants_dirty |= 1 << stage;
   }

   uint32_t image = 0;
   for (uint32_t s = 0; s < map->surface_count; s++) {
      struct anv_pipeline_binding *binding = &map->surface_to_descriptor[s];

      struct anv_state surface_state;

      if (binding->set == ANV_DESCRIPTOR_SET_COLOR_ATTACHMENTS) {
         /* Color attachment binding */
         assert(stage == MESA_SHADER_FRAGMENT);
         assert(binding->binding == 0);
         if (binding->index < subpass->color_count) {
            const unsigned att =
               subpass->color_attachments[binding->index].attachment;

            /* From the Vulkan 1.0.46 spec:
             *
             *    "If any color or depth/stencil attachments are
             *    VK_ATTACHMENT_UNUSED, then no writes occur for those
             *    attachments."
             */
            if (att == VK_ATTACHMENT_UNUSED) {
               surface_state = cmd_buffer->state.null_surface_state;
            } else {
               surface_state = cmd_buffer->state.attachments[att].color.state;
            }
         } else {
            surface_state = cmd_buffer->state.null_surface_state;
         }

         bt_map[bias + s] = surface_state.offset + state_offset;
         continue;
      }

      struct anv_descriptor_set *set =
         cmd_buffer->state.descriptors[binding->set];
      uint32_t offset = set->layout->binding[binding->binding].descriptor_index;
      struct anv_descriptor *desc = &set->descriptors[offset + binding->index];

      switch (desc->type) {
      case VK_DESCRIPTOR_TYPE_SAMPLER:
         /* Nothing for us to do here */
         continue;

      case VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER:
      case VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE: {
         struct anv_surface_state sstate =
            (desc->layout == VK_IMAGE_LAYOUT_GENERAL) ?
            desc->image_view->planes[binding->plane].general_sampler_surface_state :
            desc->image_view->planes[binding->plane].optimal_sampler_surface_state;
         surface_state = sstate.state;
         assert(surface_state.alloc_size);
         add_image_view_relocs(cmd_buffer, desc->image_view,
                               binding->plane, sstate);
         break;
      }
      case VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT:
         assert(stage == MESA_SHADER_FRAGMENT);
         if ((desc->image_view->aspect_mask & VK_IMAGE_ASPECT_ANY_COLOR_BIT) == 0) {
            /* For depth and stencil input attachments, we treat it like any
             * old texture that a user may have bound.
             */
            struct anv_surface_state sstate =
               (desc->layout == VK_IMAGE_LAYOUT_GENERAL) ?
               desc->image_view->planes[binding->plane].general_sampler_surface_state :
               desc->image_view->planes[binding->plane].optimal_sampler_surface_state;
            surface_state = sstate.state;
            assert(surface_state.alloc_size);
            add_image_view_relocs(cmd_buffer, desc->image_view,
                                  binding->plane, sstate);
         } else {
            /* For color input attachments, we create the surface state at
             * vkBeginRenderPass time so that we can include aux and clear
             * color information.
             */
            assert(binding->input_attachment_index < subpass->input_count);
            const unsigned subpass_att = binding->input_attachment_index;
            const unsigned att = subpass->input_attachments[subpass_att].attachment;
            surface_state = cmd_buffer->state.attachments[att].input.state;
         }
         break;

      case VK_DESCRIPTOR_TYPE_STORAGE_IMAGE: {
         struct anv_surface_state sstate = (binding->write_only)
            ? desc->image_view->planes[binding->plane].writeonly_storage_surface_state
            : desc->image_view->planes[binding->plane].storage_surface_state;
         surface_state = sstate.state;
         assert(surface_state.alloc_size);
         add_image_view_relocs(cmd_buffer, desc->image_view,
                               binding->plane, sstate);

         struct brw_image_param *image_param =
            &cmd_buffer->state.push_constants[stage]->images[image++];

         *image_param = desc->image_view->planes[binding->plane].storage_image_param;
         image_param->surface_idx = bias + s;
         break;
      }

      case VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER:
      case VK_DESCRIPTOR_TYPE_STORAGE_BUFFER:
      case VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER:
         surface_state = desc->buffer_view->surface_state;
         assert(surface_state.alloc_size);
         add_surface_state_reloc(cmd_buffer, surface_state,
                                 desc->buffer_view->bo,
                                 desc->buffer_view->offset);
         break;

      case VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC:
      case VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC: {
         uint32_t dynamic_offset_idx =
            pipeline->layout->set[binding->set].dynamic_offset_start +
            set->layout->binding[binding->binding].dynamic_offset_index +
            binding->index;

         /* Compute the offset within the buffer */
         uint64_t offset = desc->offset +
            cmd_buffer->state.dynamic_offsets[dynamic_offset_idx];
         /* Clamp to the buffer size */
         offset = MIN2(offset, desc->buffer->size);
         /* Clamp the range to the buffer size */
         uint32_t range = MIN2(desc->range, desc->buffer->size - offset);

         surface_state =
            anv_state_stream_alloc(&cmd_buffer->surface_state_stream, 64, 64);
         enum isl_format format =
            anv_isl_format_for_descriptor_type(desc->type);

         anv_fill_buffer_surface_state(cmd_buffer->device, surface_state,
                                       format, offset, range, 1);
         add_surface_state_reloc(cmd_buffer, surface_state,
                                 desc->buffer->bo,
                                 desc->buffer->offset + offset);
         break;
      }

      case VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER:
         surface_state = (binding->write_only)
            ? desc->buffer_view->writeonly_storage_surface_state
            : desc->buffer_view->storage_surface_state;
         assert(surface_state.alloc_size);
         add_surface_state_reloc(cmd_buffer, surface_state,
                                 desc->buffer_view->bo,
                                 desc->buffer_view->offset);

         struct brw_image_param *image_param =
            &cmd_buffer->state.push_constants[stage]->images[image++];

         *image_param = desc->buffer_view->storage_image_param;
         image_param->surface_idx = bias + s;
         break;

      default:
         assert(!"Invalid descriptor type");
         continue;
      }

      bt_map[bias + s] = surface_state.offset + state_offset;
   }
   assert(image == map->image_count);

 out:
   anv_state_flush(cmd_buffer->device, *bt_state);

   return VK_SUCCESS;
}

static VkResult
emit_samplers(struct anv_cmd_buffer *cmd_buffer,
              gl_shader_stage stage,
              struct anv_state *state)
{
   struct anv_pipeline *pipeline;

   if (stage == MESA_SHADER_COMPUTE)
      pipeline = cmd_buffer->state.compute_pipeline;
   else
      pipeline = cmd_buffer->state.pipeline;

   if (!anv_pipeline_has_stage(pipeline, stage)) {
      *state = (struct anv_state) { 0, };
      return VK_SUCCESS;
   }

   struct anv_pipeline_bind_map *map = &pipeline->shaders[stage]->bind_map;
   if (map->sampler_count == 0) {
      *state = (struct anv_state) { 0, };
      return VK_SUCCESS;
   }

   uint32_t size = map->sampler_count * 16;
   *state = anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, size, 32);

   if (state->map == NULL)
      return VK_ERROR_OUT_OF_DEVICE_MEMORY;

   for (uint32_t s = 0; s < map->sampler_count; s++) {
      struct anv_pipeline_binding *binding = &map->sampler_to_descriptor[s];
      struct anv_descriptor_set *set =
         cmd_buffer->state.descriptors[binding->set];
      uint32_t offset = set->layout->binding[binding->binding].descriptor_index;
      struct anv_descriptor *desc = &set->descriptors[offset + binding->index];

      if (desc->type != VK_DESCRIPTOR_TYPE_SAMPLER &&
          desc->type != VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER)
         continue;

      struct anv_sampler *sampler = desc->sampler;

      /* This can happen if we have an unfilled slot since TYPE_SAMPLER
       * happens to be zero.
       */
      if (sampler == NULL)
         continue;

      memcpy(state->map + (s * 16),
             sampler->state[binding->plane], sizeof(sampler->state[0]));
   }

   anv_state_flush(cmd_buffer->device, *state);

   return VK_SUCCESS;
}

static uint32_t
flush_descriptor_sets(struct anv_cmd_buffer *cmd_buffer)
{
   VkShaderStageFlags dirty = cmd_buffer->state.descriptors_dirty &
                              cmd_buffer->state.pipeline->active_stages;

   VkResult result = VK_SUCCESS;
   anv_foreach_stage(s, dirty) {
      result = emit_samplers(cmd_buffer, s, &cmd_buffer->state.samplers[s]);
      if (result != VK_SUCCESS)
         break;
      result = emit_binding_table(cmd_buffer, s,
                                  &cmd_buffer->state.binding_tables[s]);
      if (result != VK_SUCCESS)
         break;
   }

   if (result != VK_SUCCESS) {
      assert(result == VK_ERROR_OUT_OF_DEVICE_MEMORY);

      result = anv_cmd_buffer_new_binding_table_block(cmd_buffer);
      if (result != VK_SUCCESS)
         return 0;

      /* Re-emit state base addresses so we get the new surface state base
       * address before we start emitting binding tables etc.
       */
      genX(cmd_buffer_emit_state_base_address)(cmd_buffer);

      /* Re-emit all active binding tables */
      dirty |= cmd_buffer->state.pipeline->active_stages;
      anv_foreach_stage(s, dirty) {
         result = emit_samplers(cmd_buffer, s, &cmd_buffer->state.samplers[s]);
         if (result != VK_SUCCESS) {
            anv_batch_set_error(&cmd_buffer->batch, result);
            return 0;
         }
         result = emit_binding_table(cmd_buffer, s,
                                     &cmd_buffer->state.binding_tables[s]);
         if (result != VK_SUCCESS) {
            anv_batch_set_error(&cmd_buffer->batch, result);
            return 0;
         }
      }
   }

   cmd_buffer->state.descriptors_dirty &= ~dirty;

   return dirty;
}

static void
cmd_buffer_emit_descriptor_pointers(struct anv_cmd_buffer *cmd_buffer,
                                    uint32_t stages)
{
   static const uint32_t sampler_state_opcodes[] = {
      [MESA_SHADER_VERTEX]                      = 43,
      [MESA_SHADER_TESS_CTRL]                   = 44, /* HS */
      [MESA_SHADER_TESS_EVAL]                   = 45, /* DS */
      [MESA_SHADER_GEOMETRY]                    = 46,
      [MESA_SHADER_FRAGMENT]                    = 47,
      [MESA_SHADER_COMPUTE]                     = 0,
   };

   static const uint32_t binding_table_opcodes[] = {
      [MESA_SHADER_VERTEX]                      = 38,
      [MESA_SHADER_TESS_CTRL]                   = 39,
      [MESA_SHADER_TESS_EVAL]                   = 40,
      [MESA_SHADER_GEOMETRY]                    = 41,
      [MESA_SHADER_FRAGMENT]                    = 42,
      [MESA_SHADER_COMPUTE]                     = 0,
   };

   anv_foreach_stage(s, stages) {
      if (cmd_buffer->state.samplers[s].alloc_size > 0) {
         anv_batch_emit(&cmd_buffer->batch,
                        GENX(3DSTATE_SAMPLER_STATE_POINTERS_VS), ssp) {
            ssp._3DCommandSubOpcode = sampler_state_opcodes[s];
            ssp.PointertoVSSamplerState = cmd_buffer->state.samplers[s].offset;
         }
      }

      /* Always emit binding table pointers if we're asked to, since on SKL
       * this is what flushes push constants. */
      anv_batch_emit(&cmd_buffer->batch,
                     GENX(3DSTATE_BINDING_TABLE_POINTERS_VS), btp) {
         btp._3DCommandSubOpcode = binding_table_opcodes[s];
         btp.PointertoVSBindingTable = cmd_buffer->state.binding_tables[s].offset;
      }
   }
}

static uint32_t
cmd_buffer_flush_push_constants(struct anv_cmd_buffer *cmd_buffer)
{
   static const uint32_t push_constant_opcodes[] = {
      [MESA_SHADER_VERTEX]                      = 21,
      [MESA_SHADER_TESS_CTRL]                   = 25, /* HS */
      [MESA_SHADER_TESS_EVAL]                   = 26, /* DS */
      [MESA_SHADER_GEOMETRY]                    = 22,
      [MESA_SHADER_FRAGMENT]                    = 23,
      [MESA_SHADER_COMPUTE]                     = 0,
   };

   VkShaderStageFlags flushed = 0;

   anv_foreach_stage(stage, cmd_buffer->state.push_constants_dirty) {
      if (stage == MESA_SHADER_COMPUTE)
         continue;

      struct anv_state state = anv_cmd_buffer_push_constants(cmd_buffer, stage);

      if (state.offset == 0) {
         anv_batch_emit(&cmd_buffer->batch, GENX(3DSTATE_CONSTANT_VS), c)
            c._3DCommandSubOpcode = push_constant_opcodes[stage];
      } else {
         anv_batch_emit(&cmd_buffer->batch, GENX(3DSTATE_CONSTANT_VS), c) {
            c._3DCommandSubOpcode = push_constant_opcodes[stage],
            c.ConstantBody = (struct GENX(3DSTATE_CONSTANT_BODY)) {
#if GEN_GEN >= 9
               .Buffer[2] = { &cmd_buffer->device->dynamic_state_pool.block_pool.bo, state.offset },
               .ReadLength[2] = DIV_ROUND_UP(state.alloc_size, 32),
#else
               .Buffer[0] = { .offset = state.offset },
               .ReadLength[0] = DIV_ROUND_UP(state.alloc_size, 32),
#endif
            };
         }
      }

      flushed |= mesa_to_vk_shader_stage(stage);
   }

   cmd_buffer->state.push_constants_dirty &= ~VK_SHADER_STAGE_ALL_GRAPHICS;

   return flushed;
}

void
genX(cmd_buffer_flush_state)(struct anv_cmd_buffer *cmd_buffer)
{
   struct anv_pipeline *pipeline = cmd_buffer->state.pipeline;
   uint32_t *p;

   uint32_t vb_emit = cmd_buffer->state.vb_dirty & pipeline->vb_used;

   assert((pipeline->active_stages & VK_SHADER_STAGE_COMPUTE_BIT) == 0);

   genX(cmd_buffer_config_l3)(cmd_buffer, pipeline->urb.l3_config);

   genX(flush_pipeline_select_3d)(cmd_buffer);

   if (vb_emit) {
      const uint32_t num_buffers = __builtin_popcount(vb_emit);
      const uint32_t num_dwords = 1 + num_buffers * 4;

      p = anv_batch_emitn(&cmd_buffer->batch, num_dwords,
                          GENX(3DSTATE_VERTEX_BUFFERS));
      uint32_t vb, i = 0;
      for_each_bit(vb, vb_emit) {
         struct anv_buffer *buffer = cmd_buffer->state.vertex_bindings[vb].buffer;
         uint32_t offset = cmd_buffer->state.vertex_bindings[vb].offset;

         struct GENX(VERTEX_BUFFER_STATE) state = {
            .VertexBufferIndex = vb,

#if GEN_GEN >= 8
            .MemoryObjectControlState = GENX(MOCS),
#else
            .BufferAccessType = pipeline->instancing_enable[vb] ? INSTANCEDATA : VERTEXDATA,
            /* Our implementation of VK_KHR_multiview uses instancing to draw
             * the different views.  If the client asks for instancing, we
             * need to use the Instance Data Step Rate to ensure that we
             * repeat the client's per-instance data once for each view.
             */
            .InstanceDataStepRate = anv_subpass_view_count(pipeline->subpass),
            .VertexBufferMemoryObjectControlState = GENX(MOCS),
#endif

            .AddressModifyEnable = true,
            .BufferPitch = pipeline->binding_stride[vb],
            .BufferStartingAddress = { buffer->bo, buffer->offset + offset },

#if GEN_GEN >= 8
            .BufferSize = buffer->size - offset
#else
            .EndAddress = { buffer->bo, buffer->offset + buffer->size - 1},
#endif
         };

         GENX(VERTEX_BUFFER_STATE_pack)(&cmd_buffer->batch, &p[1 + i * 4], &state);
         i++;
      }
   }

   cmd_buffer->state.vb_dirty &= ~vb_emit;

   if (cmd_buffer->state.dirty & ANV_CMD_DIRTY_PIPELINE) {
      anv_batch_emit_batch(&cmd_buffer->batch, &pipeline->batch);

      /* The exact descriptor layout is pulled from the pipeline, so we need
       * to re-emit binding tables on every pipeline change.
       */
      cmd_buffer->state.descriptors_dirty |=
         cmd_buffer->state.pipeline->active_stages;

      /* If the pipeline changed, we may need to re-allocate push constant
       * space in the URB.
       */
      cmd_buffer_alloc_push_constants(cmd_buffer);
   }

#if GEN_GEN <= 7
   if (cmd_buffer->state.descriptors_dirty & VK_SHADER_STAGE_VERTEX_BIT ||
       cmd_buffer->state.push_constants_dirty & VK_SHADER_STAGE_VERTEX_BIT) {
      /* From the IVB PRM Vol. 2, Part 1, Section 3.2.1:
       *
       *    "A PIPE_CONTROL with Post-Sync Operation set to 1h and a depth
       *    stall needs to be sent just prior to any 3DSTATE_VS,
       *    3DSTATE_URB_VS, 3DSTATE_CONSTANT_VS,
       *    3DSTATE_BINDING_TABLE_POINTER_VS,
       *    3DSTATE_SAMPLER_STATE_POINTER_VS command.  Only one
       *    PIPE_CONTROL needs to be sent before any combination of VS
       *    associated 3DSTATE."
       */
      anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
         pc.DepthStallEnable  = true;
         pc.PostSyncOperation = WriteImmediateData;
         pc.Address           =
            (struct anv_address) { &cmd_buffer->device->workaround_bo, 0 };
      }
   }
#endif

   /* Render targets live in the same binding table as fragment descriptors */
   if (cmd_buffer->state.dirty & ANV_CMD_DIRTY_RENDER_TARGETS)
      cmd_buffer->state.descriptors_dirty |= VK_SHADER_STAGE_FRAGMENT_BIT;

   /* We emit the binding tables and sampler tables first, then emit push
    * constants and then finally emit binding table and sampler table
    * pointers.  It has to happen in this order, since emitting the binding
    * tables may change the push constants (in case of storage images). After
    * emitting push constants, on SKL+ we have to emit the corresponding
    * 3DSTATE_BINDING_TABLE_POINTER_* for the push constants to take effect.
    */
   uint32_t dirty = 0;
   if (cmd_buffer->state.descriptors_dirty)
      dirty = flush_descriptor_sets(cmd_buffer);

   if (cmd_buffer->state.push_constants_dirty) {
#if GEN_GEN >= 9
      /* On Sky Lake and later, the binding table pointers commands are
       * what actually flush the changes to push constant state so we need
       * to dirty them so they get re-emitted below.
       */
      dirty |= cmd_buffer_flush_push_constants(cmd_buffer);
#else
      cmd_buffer_flush_push_constants(cmd_buffer);
#endif
   }

   if (dirty)
      cmd_buffer_emit_descriptor_pointers(cmd_buffer, dirty);

   if (cmd_buffer->state.dirty & ANV_CMD_DIRTY_DYNAMIC_VIEWPORT)
      gen8_cmd_buffer_emit_viewport(cmd_buffer);

   if (cmd_buffer->state.dirty & (ANV_CMD_DIRTY_DYNAMIC_VIEWPORT |
                                  ANV_CMD_DIRTY_PIPELINE)) {
      gen8_cmd_buffer_emit_depth_viewport(cmd_buffer,
                                          pipeline->depth_clamp_enable);
   }

   if (cmd_buffer->state.dirty & ANV_CMD_DIRTY_DYNAMIC_SCISSOR)
      gen7_cmd_buffer_emit_scissor(cmd_buffer);

   genX(cmd_buffer_flush_dynamic_state)(cmd_buffer);

   genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer);
}

static void
emit_vertex_bo(struct anv_cmd_buffer *cmd_buffer,
               struct anv_bo *bo, uint32_t offset,
               uint32_t size, uint32_t index)
{
   uint32_t *p = anv_batch_emitn(&cmd_buffer->batch, 5,
                                 GENX(3DSTATE_VERTEX_BUFFERS));

   GENX(VERTEX_BUFFER_STATE_pack)(&cmd_buffer->batch, p + 1,
      &(struct GENX(VERTEX_BUFFER_STATE)) {
         .VertexBufferIndex = index,
         .AddressModifyEnable = true,
         .BufferPitch = 0,
#if (GEN_GEN >= 8)
         .MemoryObjectControlState = GENX(MOCS),
         .BufferStartingAddress = { bo, offset },
         .BufferSize = size
#else
         .VertexBufferMemoryObjectControlState = GENX(MOCS),
         .BufferStartingAddress = { bo, offset },
         .EndAddress = { bo, offset + size },
#endif
      });
}

static void
emit_base_vertex_instance_bo(struct anv_cmd_buffer *cmd_buffer,
                             struct anv_bo *bo, uint32_t offset)
{
   emit_vertex_bo(cmd_buffer, bo, offset, 8, ANV_SVGS_VB_INDEX);
}

static void
emit_base_vertex_instance(struct anv_cmd_buffer *cmd_buffer,
                          uint32_t base_vertex, uint32_t base_instance)
{
   struct anv_state id_state =
      anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, 8, 4);

   ((uint32_t *)id_state.map)[0] = base_vertex;
   ((uint32_t *)id_state.map)[1] = base_instance;

   anv_state_flush(cmd_buffer->device, id_state);

   emit_base_vertex_instance_bo(cmd_buffer,
      &cmd_buffer->device->dynamic_state_pool.block_pool.bo, id_state.offset);
}

static void
emit_draw_index(struct anv_cmd_buffer *cmd_buffer, uint32_t draw_index)
{
   struct anv_state state =
      anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, 4, 4);

   ((uint32_t *)state.map)[0] = draw_index;

   anv_state_flush(cmd_buffer->device, state);

   emit_vertex_bo(cmd_buffer,
                  &cmd_buffer->device->dynamic_state_pool.block_pool.bo,
                  state.offset, 4, ANV_DRAWID_VB_INDEX);
}

void genX(CmdDraw)(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    vertexCount,
    uint32_t                                    instanceCount,
    uint32_t                                    firstVertex,
    uint32_t                                    firstInstance)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
   struct anv_pipeline *pipeline = cmd_buffer->state.pipeline;
   const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline);

   if (anv_batch_has_error(&cmd_buffer->batch))
      return;

   genX(cmd_buffer_flush_state)(cmd_buffer);

   if (vs_prog_data->uses_basevertex || vs_prog_data->uses_baseinstance)
      emit_base_vertex_instance(cmd_buffer, firstVertex, firstInstance);
   if (vs_prog_data->uses_drawid)
      emit_draw_index(cmd_buffer, 0);

   /* Our implementation of VK_KHR_multiview uses instancing to draw the
    * different views.  We need to multiply instanceCount by the view count.
    */
   instanceCount *= anv_subpass_view_count(cmd_buffer->state.subpass);

   anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
      prim.VertexAccessType         = SEQUENTIAL;
      prim.PrimitiveTopologyType    = pipeline->topology;
      prim.VertexCountPerInstance   = vertexCount;
      prim.StartVertexLocation      = firstVertex;
      prim.InstanceCount            = instanceCount;
      prim.StartInstanceLocation    = firstInstance;
      prim.BaseVertexLocation       = 0;
   }
}

void genX(CmdDrawIndexed)(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    indexCount,
    uint32_t                                    instanceCount,
    uint32_t                                    firstIndex,
    int32_t                                     vertexOffset,
    uint32_t                                    firstInstance)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
   struct anv_pipeline *pipeline = cmd_buffer->state.pipeline;
   const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline);

   if (anv_batch_has_error(&cmd_buffer->batch))
      return;

   genX(cmd_buffer_flush_state)(cmd_buffer);

   if (vs_prog_data->uses_basevertex || vs_prog_data->uses_baseinstance)
      emit_base_vertex_instance(cmd_buffer, vertexOffset, firstInstance);
   if (vs_prog_data->uses_drawid)
      emit_draw_index(cmd_buffer, 0);

   /* Our implementation of VK_KHR_multiview uses instancing to draw the
    * different views.  We need to multiply instanceCount by the view count.
    */
   instanceCount *= anv_subpass_view_count(cmd_buffer->state.subpass);

   anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
      prim.VertexAccessType         = RANDOM;
      prim.PrimitiveTopologyType    = pipeline->topology;
      prim.VertexCountPerInstance   = indexCount;
      prim.StartVertexLocation      = firstIndex;
      prim.InstanceCount            = instanceCount;
      prim.StartInstanceLocation    = firstInstance;
      prim.BaseVertexLocation       = vertexOffset;
   }
}

/* Auto-Draw / Indirect Registers */
#define GEN7_3DPRIM_END_OFFSET          0x2420
#define GEN7_3DPRIM_START_VERTEX        0x2430
#define GEN7_3DPRIM_VERTEX_COUNT        0x2434
#define GEN7_3DPRIM_INSTANCE_COUNT      0x2438
#define GEN7_3DPRIM_START_INSTANCE      0x243C
#define GEN7_3DPRIM_BASE_VERTEX         0x2440

/* MI_MATH only exists on Haswell+ */
#if GEN_IS_HASWELL || GEN_GEN >= 8

static uint32_t
mi_alu(uint32_t opcode, uint32_t op1, uint32_t op2)
{
   struct GENX(MI_MATH_ALU_INSTRUCTION) instr = {
      .ALUOpcode = opcode,
      .Operand1 = op1,
      .Operand2 = op2,
   };

   uint32_t dw;
   GENX(MI_MATH_ALU_INSTRUCTION_pack)(NULL, &dw, &instr);

   return dw;
}

#define CS_GPR(n) (0x2600 + (n) * 8)

/* Emit dwords to multiply GPR0 by N */
static void
build_alu_multiply_gpr0(uint32_t *dw, unsigned *dw_count, uint32_t N)
{
   VK_OUTARRAY_MAKE(out, dw, dw_count);

#define append_alu(opcode, operand1, operand2) \
   vk_outarray_append(&out, alu_dw) *alu_dw = mi_alu(opcode, operand1, operand2)

   assert(N > 0);
   unsigned top_bit = 31 - __builtin_clz(N);
   for (int i = top_bit - 1; i >= 0; i--) {
      /* We get our initial data in GPR0 and we write the final data out to
       * GPR0 but we use GPR1 as our scratch register.
       */
      unsigned src_reg = i == top_bit - 1 ? MI_ALU_REG0 : MI_ALU_REG1;
      unsigned dst_reg = i == 0 ? MI_ALU_REG0 : MI_ALU_REG1;

      /* Shift the current value left by 1 */
      append_alu(MI_ALU_LOAD, MI_ALU_SRCA, src_reg);
      append_alu(MI_ALU_LOAD, MI_ALU_SRCB, src_reg);
      append_alu(MI_ALU_ADD, 0, 0);

      if (N & (1 << i)) {
         /* Store ACCU to R1 and add R0 to R1 */
         append_alu(MI_ALU_STORE, MI_ALU_REG1, MI_ALU_ACCU);
         append_alu(MI_ALU_LOAD, MI_ALU_SRCA, MI_ALU_REG0);
         append_alu(MI_ALU_LOAD, MI_ALU_SRCB, MI_ALU_REG1);
         append_alu(MI_ALU_ADD, 0, 0);
      }

      append_alu(MI_ALU_STORE, dst_reg, MI_ALU_ACCU);
   }

#undef append_alu
}

static void
emit_mul_gpr0(struct anv_batch *batch, uint32_t N)
{
   uint32_t num_dwords;
   build_alu_multiply_gpr0(NULL, &num_dwords, N);

   uint32_t *dw = anv_batch_emitn(batch, 1 + num_dwords, GENX(MI_MATH));
   build_alu_multiply_gpr0(dw + 1, &num_dwords, N);
}

#endif /* GEN_IS_HASWELL || GEN_GEN >= 8 */

static void
load_indirect_parameters(struct anv_cmd_buffer *cmd_buffer,
                         struct anv_buffer *buffer, uint64_t offset,
                         bool indexed)
{
   struct anv_batch *batch = &cmd_buffer->batch;
   struct anv_bo *bo = buffer->bo;
   uint32_t bo_offset = buffer->offset + offset;

   emit_lrm(batch, GEN7_3DPRIM_VERTEX_COUNT, bo, bo_offset);

   unsigned view_count = anv_subpass_view_count(cmd_buffer->state.subpass);
   if (view_count > 1) {
#if GEN_IS_HASWELL || GEN_GEN >= 8
      emit_lrm(batch, CS_GPR(0), bo, bo_offset + 4);
      emit_mul_gpr0(batch, view_count);
      emit_lrr(batch, GEN7_3DPRIM_INSTANCE_COUNT, CS_GPR(0));
#else
      anv_finishme("Multiview + indirect draw requires MI_MATH\n"
                   "MI_MATH is not supported on Ivy Bridge");
      emit_lrm(batch, GEN7_3DPRIM_INSTANCE_COUNT, bo, bo_offset + 4);
#endif
   } else {
      emit_lrm(batch, GEN7_3DPRIM_INSTANCE_COUNT, bo, bo_offset + 4);
   }

   emit_lrm(batch, GEN7_3DPRIM_START_VERTEX, bo, bo_offset + 8);

   if (indexed) {
      emit_lrm(batch, GEN7_3DPRIM_BASE_VERTEX, bo, bo_offset + 12);
      emit_lrm(batch, GEN7_3DPRIM_START_INSTANCE, bo, bo_offset + 16);
   } else {
      emit_lrm(batch, GEN7_3DPRIM_START_INSTANCE, bo, bo_offset + 12);
      emit_lri(batch, GEN7_3DPRIM_BASE_VERTEX, 0);
   }
}

void genX(CmdDrawIndirect)(
    VkCommandBuffer                             commandBuffer,
    VkBuffer                                    _buffer,
    VkDeviceSize                                offset,
    uint32_t                                    drawCount,
    uint32_t                                    stride)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
   ANV_FROM_HANDLE(anv_buffer, buffer, _buffer);
   struct anv_pipeline *pipeline = cmd_buffer->state.pipeline;
   const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline);

   if (anv_batch_has_error(&cmd_buffer->batch))
      return;

   genX(cmd_buffer_flush_state)(cmd_buffer);

   for (uint32_t i = 0; i < drawCount; i++) {
      struct anv_bo *bo = buffer->bo;
      uint32_t bo_offset = buffer->offset + offset;

      if (vs_prog_data->uses_basevertex || vs_prog_data->uses_baseinstance)
         emit_base_vertex_instance_bo(cmd_buffer, bo, bo_offset + 8);
      if (vs_prog_data->uses_drawid)
         emit_draw_index(cmd_buffer, i);

      load_indirect_parameters(cmd_buffer, buffer, offset, false);

      anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
         prim.IndirectParameterEnable  = true;
         prim.VertexAccessType         = SEQUENTIAL;
         prim.PrimitiveTopologyType    = pipeline->topology;
      }

      offset += stride;
   }
}

void genX(CmdDrawIndexedIndirect)(
    VkCommandBuffer                             commandBuffer,
    VkBuffer                                    _buffer,
    VkDeviceSize                                offset,
    uint32_t                                    drawCount,
    uint32_t                                    stride)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
   ANV_FROM_HANDLE(anv_buffer, buffer, _buffer);
   struct anv_pipeline *pipeline = cmd_buffer->state.pipeline;
   const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline);

   if (anv_batch_has_error(&cmd_buffer->batch))
      return;

   genX(cmd_buffer_flush_state)(cmd_buffer);

   for (uint32_t i = 0; i < drawCount; i++) {
      struct anv_bo *bo = buffer->bo;
      uint32_t bo_offset = buffer->offset + offset;

      /* TODO: We need to stomp base vertex to 0 somehow */
      if (vs_prog_data->uses_basevertex || vs_prog_data->uses_baseinstance)
         emit_base_vertex_instance_bo(cmd_buffer, bo, bo_offset + 12);
      if (vs_prog_data->uses_drawid)
         emit_draw_index(cmd_buffer, i);

      load_indirect_parameters(cmd_buffer, buffer, offset, true);

      anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
         prim.IndirectParameterEnable  = true;
         prim.VertexAccessType         = RANDOM;
         prim.PrimitiveTopologyType    = pipeline->topology;
      }

      offset += stride;
   }
}

static VkResult
flush_compute_descriptor_set(struct anv_cmd_buffer *cmd_buffer)
{
   struct anv_pipeline *pipeline = cmd_buffer->state.compute_pipeline;
   struct anv_state surfaces = { 0, }, samplers = { 0, };
   VkResult result;

   result = emit_binding_table(cmd_buffer, MESA_SHADER_COMPUTE, &surfaces);
   if (result != VK_SUCCESS) {
      assert(result == VK_ERROR_OUT_OF_DEVICE_MEMORY);

      result = anv_cmd_buffer_new_binding_table_block(cmd_buffer);
      if (result != VK_SUCCESS)
         return result;

      /* Re-emit state base addresses so we get the new surface state base
       * address before we start emitting binding tables etc.
       */
      genX(cmd_buffer_emit_state_base_address)(cmd_buffer);

      result = emit_binding_table(cmd_buffer, MESA_SHADER_COMPUTE, &surfaces);
      if (result != VK_SUCCESS) {
         anv_batch_set_error(&cmd_buffer->batch, result);
         return result;
      }
   }

   result = emit_samplers(cmd_buffer, MESA_SHADER_COMPUTE, &samplers);
   if (result != VK_SUCCESS) {
      anv_batch_set_error(&cmd_buffer->batch, result);
      return result;
   }

   uint32_t iface_desc_data_dw[GENX(INTERFACE_DESCRIPTOR_DATA_length)];
   struct GENX(INTERFACE_DESCRIPTOR_DATA) desc = {
      .BindingTablePointer = surfaces.offset,
      .SamplerStatePointer = samplers.offset,
   };
   GENX(INTERFACE_DESCRIPTOR_DATA_pack)(NULL, iface_desc_data_dw, &desc);

   struct anv_state state =
      anv_cmd_buffer_merge_dynamic(cmd_buffer, iface_desc_data_dw,
                                   pipeline->interface_descriptor_data,
                                   GENX(INTERFACE_DESCRIPTOR_DATA_length),
                                   64);

   uint32_t size = GENX(INTERFACE_DESCRIPTOR_DATA_length) * sizeof(uint32_t);
   anv_batch_emit(&cmd_buffer->batch,
                  GENX(MEDIA_INTERFACE_DESCRIPTOR_LOAD), mid) {
      mid.InterfaceDescriptorTotalLength        = size;
      mid.InterfaceDescriptorDataStartAddress   = state.offset;
   }

   return VK_SUCCESS;
}

void
genX(cmd_buffer_flush_compute_state)(struct anv_cmd_buffer *cmd_buffer)
{
   struct anv_pipeline *pipeline = cmd_buffer->state.compute_pipeline;
   MAYBE_UNUSED VkResult result;

   assert(pipeline->active_stages == VK_SHADER_STAGE_COMPUTE_BIT);

   genX(cmd_buffer_config_l3)(cmd_buffer, pipeline->urb.l3_config);

   genX(flush_pipeline_select_gpgpu)(cmd_buffer);

   if (cmd_buffer->state.compute_dirty & ANV_CMD_DIRTY_PIPELINE) {
      /* From the Sky Lake PRM Vol 2a, MEDIA_VFE_STATE:
       *
       *    "A stalling PIPE_CONTROL is required before MEDIA_VFE_STATE unless
       *    the only bits that are changed are scoreboard related: Scoreboard
       *    Enable, Scoreboard Type, Scoreboard Mask, Scoreboard * Delta. For
       *    these scoreboard related states, a MEDIA_STATE_FLUSH is
       *    sufficient."
       */
      cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_CS_STALL_BIT;
      genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer);

      anv_batch_emit_batch(&cmd_buffer->batch, &pipeline->batch);
   }

   if ((cmd_buffer->state.descriptors_dirty & VK_SHADER_STAGE_COMPUTE_BIT) ||
       (cmd_buffer->state.compute_dirty & ANV_CMD_DIRTY_PIPELINE)) {
      /* FIXME: figure out descriptors for gen7 */
      result = flush_compute_descriptor_set(cmd_buffer);
      if (result != VK_SUCCESS)
         return;

      cmd_buffer->state.descriptors_dirty &= ~VK_SHADER_STAGE_COMPUTE_BIT;
   }

   if (cmd_buffer->state.push_constants_dirty & VK_SHADER_STAGE_COMPUTE_BIT) {
      struct anv_state push_state =
         anv_cmd_buffer_cs_push_constants(cmd_buffer);

      if (push_state.alloc_size) {
         anv_batch_emit(&cmd_buffer->batch, GENX(MEDIA_CURBE_LOAD), curbe) {
            curbe.CURBETotalDataLength    = push_state.alloc_size;
            curbe.CURBEDataStartAddress   = push_state.offset;
         }
      }
   }

   cmd_buffer->state.compute_dirty = 0;

   genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer);
}

#if GEN_GEN == 7

static VkResult
verify_cmd_parser(const struct anv_device *device,
                  int required_version,
                  const char *function)
{
   if (device->instance->physicalDevice.cmd_parser_version < required_version) {
      return vk_errorf(device->instance, device->instance,
                       VK_ERROR_FEATURE_NOT_PRESENT,
                       "cmd parser version %d is required for %s",
                       required_version, function);
   } else {
      return VK_SUCCESS;
   }
}

#endif

void genX(CmdDispatch)(
    VkCommandBuffer                             commandBuffer,
    uint32_t                                    x,
    uint32_t                                    y,
    uint32_t                                    z)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
   struct anv_pipeline *pipeline = cmd_buffer->state.compute_pipeline;
   const struct brw_cs_prog_data *prog_data = get_cs_prog_data(pipeline);

   if (anv_batch_has_error(&cmd_buffer->batch))
      return;

   if (prog_data->uses_num_work_groups) {
      struct anv_state state =
         anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, 12, 4);
      uint32_t *sizes = state.map;
      sizes[0] = x;
      sizes[1] = y;
      sizes[2] = z;
      anv_state_flush(cmd_buffer->device, state);
      cmd_buffer->state.num_workgroups_offset = state.offset;
      cmd_buffer->state.num_workgroups_bo =
         &cmd_buffer->device->dynamic_state_pool.block_pool.bo;
   }

   genX(cmd_buffer_flush_compute_state)(cmd_buffer);

   anv_batch_emit(&cmd_buffer->batch, GENX(GPGPU_WALKER), ggw) {
      ggw.SIMDSize                     = prog_data->simd_size / 16;
      ggw.ThreadDepthCounterMaximum    = 0;
      ggw.ThreadHeightCounterMaximum   = 0;
      ggw.ThreadWidthCounterMaximum    = prog_data->threads - 1;
      ggw.ThreadGroupIDXDimension      = x;
      ggw.ThreadGroupIDYDimension      = y;
      ggw.ThreadGroupIDZDimension      = z;
      ggw.RightExecutionMask           = pipeline->cs_right_mask;
      ggw.BottomExecutionMask          = 0xffffffff;
   }

   anv_batch_emit(&cmd_buffer->batch, GENX(MEDIA_STATE_FLUSH), msf);
}

#define GPGPU_DISPATCHDIMX 0x2500
#define GPGPU_DISPATCHDIMY 0x2504
#define GPGPU_DISPATCHDIMZ 0x2508

void genX(CmdDispatchIndirect)(
    VkCommandBuffer                             commandBuffer,
    VkBuffer                                    _buffer,
    VkDeviceSize                                offset)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
   ANV_FROM_HANDLE(anv_buffer, buffer, _buffer);
   struct anv_pipeline *pipeline = cmd_buffer->state.compute_pipeline;
   const struct brw_cs_prog_data *prog_data = get_cs_prog_data(pipeline);
   struct anv_bo *bo = buffer->bo;
   uint32_t bo_offset = buffer->offset + offset;
   struct anv_batch *batch = &cmd_buffer->batch;

#if GEN_GEN == 7
   /* Linux 4.4 added command parser version 5 which allows the GPGPU
    * indirect dispatch registers to be written.
    */
   if (verify_cmd_parser(cmd_buffer->device, 5,
                         "vkCmdDispatchIndirect") != VK_SUCCESS)
      return;
#endif

   if (prog_data->uses_num_work_groups) {
      cmd_buffer->state.num_workgroups_offset = bo_offset;
      cmd_buffer->state.num_workgroups_bo = bo;
   }

   genX(cmd_buffer_flush_compute_state)(cmd_buffer);

   emit_lrm(batch, GPGPU_DISPATCHDIMX, bo, bo_offset);
   emit_lrm(batch, GPGPU_DISPATCHDIMY, bo, bo_offset + 4);
   emit_lrm(batch, GPGPU_DISPATCHDIMZ, bo, bo_offset + 8);

#if GEN_GEN <= 7
   /* Clear upper 32-bits of SRC0 and all 64-bits of SRC1 */
   emit_lri(batch, MI_PREDICATE_SRC0 + 4, 0);
   emit_lri(batch, MI_PREDICATE_SRC1 + 0, 0);
   emit_lri(batch, MI_PREDICATE_SRC1 + 4, 0);

   /* Load compute_dispatch_indirect_x_size into SRC0 */
   emit_lrm(batch, MI_PREDICATE_SRC0, bo, bo_offset + 0);

   /* predicate = (compute_dispatch_indirect_x_size == 0); */
   anv_batch_emit(batch, GENX(MI_PREDICATE), mip) {
      mip.LoadOperation    = LOAD_LOAD;
      mip.CombineOperation = COMBINE_SET;
      mip.CompareOperation = COMPARE_SRCS_EQUAL;
   }

   /* Load compute_dispatch_indirect_y_size into SRC0 */
   emit_lrm(batch, MI_PREDICATE_SRC0, bo, bo_offset + 4);

   /* predicate |= (compute_dispatch_indirect_y_size == 0); */
   anv_batch_emit(batch, GENX(MI_PREDICATE), mip) {
      mip.LoadOperation    = LOAD_LOAD;
      mip.CombineOperation = COMBINE_OR;
      mip.CompareOperation = COMPARE_SRCS_EQUAL;
   }

   /* Load compute_dispatch_indirect_z_size into SRC0 */
   emit_lrm(batch, MI_PREDICATE_SRC0, bo, bo_offset + 8);

   /* predicate |= (compute_dispatch_indirect_z_size == 0); */
   anv_batch_emit(batch, GENX(MI_PREDICATE), mip) {
      mip.LoadOperation    = LOAD_LOAD;
      mip.CombineOperation = COMBINE_OR;
      mip.CompareOperation = COMPARE_SRCS_EQUAL;
   }

   /* predicate = !predicate; */
#define COMPARE_FALSE                           1
   anv_batch_emit(batch, GENX(MI_PREDICATE), mip) {
      mip.LoadOperation    = LOAD_LOADINV;
      mip.CombineOperation = COMBINE_OR;
      mip.CompareOperation = COMPARE_FALSE;
   }
#endif

   anv_batch_emit(batch, GENX(GPGPU_WALKER), ggw) {
      ggw.IndirectParameterEnable      = true;
      ggw.PredicateEnable              = GEN_GEN <= 7;
      ggw.SIMDSize                     = prog_data->simd_size / 16;
      ggw.ThreadDepthCounterMaximum    = 0;
      ggw.ThreadHeightCounterMaximum   = 0;
      ggw.ThreadWidthCounterMaximum    = prog_data->threads - 1;
      ggw.RightExecutionMask           = pipeline->cs_right_mask;
      ggw.BottomExecutionMask          = 0xffffffff;
   }

   anv_batch_emit(batch, GENX(MEDIA_STATE_FLUSH), msf);
}

static void
genX(flush_pipeline_select)(struct anv_cmd_buffer *cmd_buffer,
                            uint32_t pipeline)
{
   if (cmd_buffer->state.current_pipeline == pipeline)
      return;

#if GEN_GEN >= 8 && GEN_GEN < 10
   /* From the Broadwell PRM, Volume 2a: Instructions, PIPELINE_SELECT:
    *
    *   Software must clear the COLOR_CALC_STATE Valid field in
    *   3DSTATE_CC_STATE_POINTERS command prior to send a PIPELINE_SELECT
    *   with Pipeline Select set to GPGPU.
    *
    * The internal hardware docs recommend the same workaround for Gen9
    * hardware too.
    */
   if (pipeline == GPGPU)
      anv_batch_emit(&cmd_buffer->batch, GENX(3DSTATE_CC_STATE_POINTERS), t);
#endif

   /* From "BXML » GT » MI » vol1a GPU Overview » [Instruction]
    * PIPELINE_SELECT [DevBWR+]":
    *
    *   Project: DEVSNB+
    *
    *   Software must ensure all the write caches are flushed through a
    *   stalling PIPE_CONTROL command followed by another PIPE_CONTROL
    *   command to invalidate read only caches prior to programming
    *   MI_PIPELINE_SELECT command to change the Pipeline Select Mode.
    */
   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
      pc.RenderTargetCacheFlushEnable  = true;
      pc.DepthCacheFlushEnable         = true;
      pc.DCFlushEnable                 = true;
      pc.PostSyncOperation             = NoWrite;
      pc.CommandStreamerStallEnable    = true;
   }

   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
      pc.TextureCacheInvalidationEnable   = true;
      pc.ConstantCacheInvalidationEnable  = true;
      pc.StateCacheInvalidationEnable     = true;
      pc.InstructionCacheInvalidateEnable = true;
      pc.PostSyncOperation                = NoWrite;
   }

   anv_batch_emit(&cmd_buffer->batch, GENX(PIPELINE_SELECT), ps) {
#if GEN_GEN >= 9
      ps.MaskBits = 3;
#endif
      ps.PipelineSelection = pipeline;
   }

   cmd_buffer->state.current_pipeline = pipeline;
}

void
genX(flush_pipeline_select_3d)(struct anv_cmd_buffer *cmd_buffer)
{
   genX(flush_pipeline_select)(cmd_buffer, _3D);
}

void
genX(flush_pipeline_select_gpgpu)(struct anv_cmd_buffer *cmd_buffer)
{
   genX(flush_pipeline_select)(cmd_buffer, GPGPU);
}

void
genX(cmd_buffer_emit_gen7_depth_flush)(struct anv_cmd_buffer *cmd_buffer)
{
   if (GEN_GEN >= 8)
      return;

   /* From the Haswell PRM, documentation for 3DSTATE_DEPTH_BUFFER:
    *
    *    "Restriction: Prior to changing Depth/Stencil Buffer state (i.e., any
    *    combination of 3DSTATE_DEPTH_BUFFER, 3DSTATE_CLEAR_PARAMS,
    *    3DSTATE_STENCIL_BUFFER, 3DSTATE_HIER_DEPTH_BUFFER) SW must first
    *    issue a pipelined depth stall (PIPE_CONTROL with Depth Stall bit
    *    set), followed by a pipelined depth cache flush (PIPE_CONTROL with
    *    Depth Flush Bit set, followed by another pipelined depth stall
    *    (PIPE_CONTROL with Depth Stall Bit set), unless SW can otherwise
    *    guarantee that the pipeline from WM onwards is already flushed (e.g.,
    *    via a preceding MI_FLUSH)."
    */
   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
      pipe.DepthStallEnable = true;
   }
   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
      pipe.DepthCacheFlushEnable = true;
   }
   anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
      pipe.DepthStallEnable = true;
   }
}

static void
cmd_buffer_emit_depth_stencil(struct anv_cmd_buffer *cmd_buffer)
{
   struct anv_device *device = cmd_buffer->device;
   const struct anv_image_view *iview =
      anv_cmd_buffer_get_depth_stencil_view(cmd_buffer);
   const struct anv_image *image = iview ? iview->image : NULL;

   /* FIXME: Width and Height are wrong */

   genX(cmd_buffer_emit_gen7_depth_flush)(cmd_buffer);

   uint32_t *dw = anv_batch_emit_dwords(&cmd_buffer->batch,
                                        device->isl_dev.ds.size / 4);
   if (dw == NULL)
      return;

   struct isl_depth_stencil_hiz_emit_info info = {
      .mocs = device->default_mocs,
   };

   if (iview)
      info.view = &iview->planes[0].isl;

   if (image && (image->aspects & VK_IMAGE_ASPECT_DEPTH_BIT)) {
      uint32_t depth_plane =
         anv_image_aspect_to_plane(image->aspects, VK_IMAGE_ASPECT_DEPTH_BIT);
      const struct anv_surface *surface = &image->planes[depth_plane].surface;

      info.depth_surf = &surface->isl;

      info.depth_address =
         anv_batch_emit_reloc(&cmd_buffer->batch,
                              dw + device->isl_dev.ds.depth_offset / 4,
                              image->planes[depth_plane].bo,
                              image->planes[depth_plane].bo_offset +
                              surface->offset);

      const uint32_t ds =
         cmd_buffer->state.subpass->depth_stencil_attachment.attachment;
      info.hiz_usage = cmd_buffer->state.attachments[ds].aux_usage;
      if (info.hiz_usage == ISL_AUX_USAGE_HIZ) {
         info.hiz_surf = &image->planes[depth_plane].aux_surface.isl;

         info.hiz_address =
            anv_batch_emit_reloc(&cmd_buffer->batch,
                                 dw + device->isl_dev.ds.hiz_offset / 4,
                                 image->planes[depth_plane].bo,
                                 image->planes[depth_plane].bo_offset +
                                 image->planes[depth_plane].aux_surface.offset);

         info.depth_clear_value = ANV_HZ_FC_VAL;
      }
   }

   if (image && (image->aspects & VK_IMAGE_ASPECT_STENCIL_BIT)) {
      uint32_t stencil_plane =
         anv_image_aspect_to_plane(image->aspects, VK_IMAGE_ASPECT_STENCIL_BIT);
      const struct anv_surface *surface = &image->planes[stencil_plane].surface;

      info.stencil_surf = &surface->isl;

      info.stencil_address =
         anv_batch_emit_reloc(&cmd_buffer->batch,
                              dw + device->isl_dev.ds.stencil_offset / 4,
                              image->planes[stencil_plane].bo,
                              image->planes[stencil_plane].bo_offset + surface->offset);
   }

   isl_emit_depth_stencil_hiz_s(&device->isl_dev, dw, &info);

   cmd_buffer->state.hiz_enabled = info.hiz_usage == ISL_AUX_USAGE_HIZ;
}


/**
 * @brief Perform any layout transitions required at the beginning and/or end
 *        of the current subpass for depth buffers.
 *
 * TODO: Consider preprocessing the attachment reference array at render pass
 *       create time to determine if no layout transition is needed at the
 *       beginning and/or end of each subpass.
 *
 * @param cmd_buffer The command buffer the transition is happening within.
 * @param subpass_end If true, marks that the transition is happening at the
 *                    end of the subpass.
 */
static void
cmd_buffer_subpass_transition_layouts(struct anv_cmd_buffer * const cmd_buffer,
                                      const bool subpass_end)
{
   /* We need a non-NULL command buffer. */
   assert(cmd_buffer);

   const struct anv_cmd_state * const cmd_state = &cmd_buffer->state;
   const struct anv_subpass * const subpass = cmd_state->subpass;

   /* This function must be called within a subpass. */
   assert(subpass);

   /* If there are attachment references, the array shouldn't be NULL.
    */
   if (subpass->attachment_count > 0)
      assert(subpass->attachments);

   /* Iterate over the array of attachment references. */
   for (const VkAttachmentReference *att_ref = subpass->attachments;
        att_ref < subpass->attachments + subpass->attachment_count; att_ref++) {

      /* If the attachment is unused, we can't perform a layout transition. */
      if (att_ref->attachment == VK_ATTACHMENT_UNUSED)
         continue;

      /* This attachment index shouldn't go out of bounds. */
      assert(att_ref->attachment < cmd_state->pass->attachment_count);

      const struct anv_render_pass_attachment * const att_desc =
         &cmd_state->pass->attachments[att_ref->attachment];
      struct anv_attachment_state * const att_state =
         &cmd_buffer->state.attachments[att_ref->attachment];

      /* The attachment should not be used in a subpass after its last. */
      assert(att_desc->last_subpass_idx >= anv_get_subpass_id(cmd_state));

      if (subpass_end && anv_get_subpass_id(cmd_state) <
          att_desc->last_subpass_idx) {
         /* We're calling this function on a buffer twice in one subpass and
          * this is not the last use of the buffer. The layout should not have
          * changed from the first call and no transition is necessary.
          */
         assert(att_state->current_layout == att_ref->layout ||
                att_state->current_layout ==
                VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL);
         continue;
      }

      /* The attachment index must be less than the number of attachments
       * within the framebuffer.
       */
      assert(att_ref->attachment < cmd_state->framebuffer->attachment_count);

      const struct anv_image_view * const iview =
         cmd_state->framebuffer->attachments[att_ref->attachment];
      const struct anv_image * const image = iview->image;

      /* Get the appropriate target layout for this attachment. */
      VkImageLayout target_layout;

      /* A resolve is necessary before use as an input attachment if the clear
       * color or auxiliary buffer usage isn't supported by the sampler.
       */
      const bool input_needs_resolve =
            (att_state->fast_clear && !att_state->clear_color_is_zero_one) ||
            att_state->input_aux_usage != att_state->aux_usage;
      if (subpass_end) {
         target_layout = att_desc->final_layout;
      } else if (iview->aspect_mask & VK_IMAGE_ASPECT_ANY_COLOR_BIT &&
                 !input_needs_resolve) {
         /* Layout transitions before the final only help to enable sampling as
          * an input attachment. If the input attachment supports sampling
          * using the auxiliary surface, we can skip such transitions by making
          * the target layout one that is CCS-aware.
          */
         target_layout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL;
      } else {
         target_layout = att_ref->layout;
      }

      /* Perform the layout transition. */
      if (image->aspects & VK_IMAGE_ASPECT_DEPTH_BIT) {
         transition_depth_buffer(cmd_buffer, image,
                                 att_state->current_layout, target_layout);
         att_state->aux_usage =
            anv_layout_to_aux_usage(&cmd_buffer->device->info, image,
                                    VK_IMAGE_ASPECT_DEPTH_BIT, target_layout);
      } else if (image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT) {
         assert(image->aspects == VK_IMAGE_ASPECT_COLOR_BIT);
         transition_color_buffer(cmd_buffer, image, VK_IMAGE_ASPECT_COLOR_BIT,
                                 iview->planes[0].isl.base_level, 1,
                                 iview->planes[0].isl.base_array_layer,
                                 iview->planes[0].isl.array_len,
                                 att_state->current_layout, target_layout);
      }

      att_state->current_layout = target_layout;
   }
}

/* Update the clear value dword(s) in surface state objects or the fast clear
 * state buffer entry for the color attachments used in this subpass.
 */
static void
cmd_buffer_subpass_sync_fast_clear_values(struct anv_cmd_buffer *cmd_buffer)
{
   assert(cmd_buffer && cmd_buffer->state.subpass);

   const struct anv_cmd_state *state = &cmd_buffer->state;

   /* Iterate through every color attachment used in this subpass. */
   for (uint32_t i = 0; i < state->subpass->color_count; ++i) {

      /* The attachment should be one of the attachments described in the
       * render pass and used in the subpass.
       */
      const uint32_t a = state->subpass->color_attachments[i].attachment;
      if (a == VK_ATTACHMENT_UNUSED)
         continue;

      assert(a < state->pass->attachment_count);

      /* Store some information regarding this attachment. */
      const struct anv_attachment_state *att_state = &state->attachments[a];
      const struct anv_image_view *iview = state->framebuffer->attachments[a];
      const struct anv_render_pass_attachment *rp_att =
         &state->pass->attachments[a];

      if (att_state->aux_usage == ISL_AUX_USAGE_NONE)
         continue;

      /* The fast clear state entry must be updated if a fast clear is going to
       * happen. The surface state must be updated if the clear value from a
       * prior fast clear may be needed.
       */
      if (att_state->pending_clear_aspects && att_state->fast_clear) {
         /* Update the fast clear state entry. */
         genX(copy_fast_clear_dwords)(cmd_buffer, att_state->color.state,
                                      iview->image,
                                      VK_IMAGE_ASPECT_COLOR_BIT,
                                      iview->planes[0].isl.base_level,
                                      true /* copy from ss */);

         /* Fast-clears impact whether or not a resolve will be necessary. */
         if (iview->image->planes[0].aux_usage == ISL_AUX_USAGE_CCS_E &&
             att_state->clear_color_is_zero) {
            /* This image always has the auxiliary buffer enabled. We can mark
             * the subresource as not needing a resolve because the clear color
             * will match what's in every RENDER_SURFACE_STATE object when it's
             * being used for sampling.
             */
            genX(set_image_needs_resolve)(cmd_buffer, iview->image,
                                          VK_IMAGE_ASPECT_COLOR_BIT,
                                          iview->planes[0].isl.base_level,
                                          false);
         } else {
            genX(set_image_needs_resolve)(cmd_buffer, iview->image,
                                          VK_IMAGE_ASPECT_COLOR_BIT,
                                          iview->planes[0].isl.base_level,
                                          true);
         }
      } else if (rp_att->load_op == VK_ATTACHMENT_LOAD_OP_LOAD) {
         /* The attachment may have been fast-cleared in a previous render
          * pass and the value is needed now. Update the surface state(s).
          *
          * TODO: Do this only once per render pass instead of every subpass.
          */
         genX(copy_fast_clear_dwords)(cmd_buffer, att_state->color.state,
                                      iview->image,
                                      VK_IMAGE_ASPECT_COLOR_BIT,
                                      iview->planes[0].isl.base_level,
                                      false /* copy to ss */);

         if (need_input_attachment_state(rp_att) &&
             att_state->input_aux_usage != ISL_AUX_USAGE_NONE) {
            genX(copy_fast_clear_dwords)(cmd_buffer, att_state->input.state,
                                         iview->image,
                                         VK_IMAGE_ASPECT_COLOR_BIT,
                                         iview->planes[0].isl.base_level,
                                         false /* copy to ss */);
         }
      }
   }
}


static void
genX(cmd_buffer_set_subpass)(struct anv_cmd_buffer *cmd_buffer,
                             struct anv_subpass *subpass)
{
   cmd_buffer->state.subpass = subpass;

   cmd_buffer->state.dirty |= ANV_CMD_DIRTY_RENDER_TARGETS;

   /* Our implementation of VK_KHR_multiview uses instancing to draw the
    * different views.  If the client asks for instancing, we need to use the
    * Instance Data Step Rate to ensure that we repeat the client's
    * per-instance data once for each view.  Since this bit is in
    * VERTEX_BUFFER_STATE on gen7, we need to dirty vertex buffers at the top
    * of each subpass.
    */
   if (GEN_GEN == 7)
      cmd_buffer->state.vb_dirty |= ~0;

   /* Perform transitions to the subpass layout before any writes have
    * occurred.
    */
   cmd_buffer_subpass_transition_layouts(cmd_buffer, false);

   /* Update clear values *after* performing automatic layout transitions.
    * This ensures that transitions from the UNDEFINED layout have had a chance
    * to populate the clear value buffer with the correct values for the
    * LOAD_OP_LOAD loadOp and that the fast-clears will update the buffer
    * without the aforementioned layout transition overwriting the fast-clear
    * value.
    */
   cmd_buffer_subpass_sync_fast_clear_values(cmd_buffer);

   cmd_buffer_emit_depth_stencil(cmd_buffer);

   anv_cmd_buffer_clear_subpass(cmd_buffer);
}

void genX(CmdBeginRenderPass)(
    VkCommandBuffer                             commandBuffer,
    const VkRenderPassBeginInfo*                pRenderPassBegin,
    VkSubpassContents                           contents)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
   ANV_FROM_HANDLE(anv_render_pass, pass, pRenderPassBegin->renderPass);
   ANV_FROM_HANDLE(anv_framebuffer, framebuffer, pRenderPassBegin->framebuffer);

   cmd_buffer->state.framebuffer = framebuffer;
   cmd_buffer->state.pass = pass;
   cmd_buffer->state.render_area = pRenderPassBegin->renderArea;
   VkResult result =
      genX(cmd_buffer_setup_attachments)(cmd_buffer, pass, pRenderPassBegin);

   /* If we failed to setup the attachments we should not try to go further */
   if (result != VK_SUCCESS) {
      assert(anv_batch_has_error(&cmd_buffer->batch));
      return;
   }

   genX(flush_pipeline_select_3d)(cmd_buffer);

   genX(cmd_buffer_set_subpass)(cmd_buffer, pass->subpasses);

   cmd_buffer->state.pending_pipe_bits |=
      cmd_buffer->state.pass->subpass_flushes[0];
}

void genX(CmdNextSubpass)(
    VkCommandBuffer                             commandBuffer,
    VkSubpassContents                           contents)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);

   if (anv_batch_has_error(&cmd_buffer->batch))
      return;

   assert(cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_PRIMARY);

   anv_cmd_buffer_resolve_subpass(cmd_buffer);

   /* Perform transitions to the final layout after all writes have occurred.
    */
   cmd_buffer_subpass_transition_layouts(cmd_buffer, true);

   genX(cmd_buffer_set_subpass)(cmd_buffer, cmd_buffer->state.subpass + 1);

   uint32_t subpass_id = anv_get_subpass_id(&cmd_buffer->state);
   cmd_buffer->state.pending_pipe_bits |=
      cmd_buffer->state.pass->subpass_flushes[subpass_id];
}

void genX(CmdEndRenderPass)(
    VkCommandBuffer                             commandBuffer)
{
   ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);

   if (anv_batch_has_error(&cmd_buffer->batch))
      return;

   anv_cmd_buffer_resolve_subpass(cmd_buffer);

   /* Perform transitions to the final layout after all writes have occurred.
    */
   cmd_buffer_subpass_transition_layouts(cmd_buffer, true);

   cmd_buffer->state.pending_pipe_bits |=
      cmd_buffer->state.pass->subpass_flushes[cmd_buffer->state.pass->subpass_count];

   cmd_buffer->state.hiz_enabled = false;

#ifndef NDEBUG
   anv_dump_add_framebuffer(cmd_buffer, cmd_buffer->state.framebuffer);
#endif

   /* Remove references to render pass specific state. This enables us to
    * detect whether or not we're in a renderpass.
    */
   cmd_buffer->state.framebuffer = NULL;
   cmd_buffer->state.pass = NULL;
   cmd_buffer->state.subpass = NULL;
}