/* * Copyright 2015 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ #include "isl_gen7.h" #include "isl_priv.h" bool isl_gen7_choose_msaa_layout(const struct isl_device *dev, const struct isl_surf_init_info *info, enum isl_tiling tiling, enum isl_msaa_layout *msaa_layout) { bool require_array = false; bool require_interleaved = false; assert(ISL_DEV_GEN(dev) == 7); assert(info->samples >= 1); if (info->samples == 1) { *msaa_layout = ISL_MSAA_LAYOUT_NONE; return true; } if (!isl_format_supports_multisampling(dev->info, info->format)) return false; /* From the Ivybridge PRM, Volume 4 Part 1 p73, SURFACE_STATE, Number of * Multisamples: * * - If this field is any value other than MULTISAMPLECOUNT_1, the * Surface Type must be SURFTYPE_2D. * * - If this field is any value other than MULTISAMPLECOUNT_1, Surface * Min LOD, Mip Count / LOD, and Resource Min LOD must be set to zero */ if (info->dim != ISL_SURF_DIM_2D) return false; if (info->levels > 1) return false; /* The Ivyrbridge PRM insists twice that signed integer formats cannot be * multisampled. * * From the Ivybridge PRM, Volume 4 Part 1 p73, SURFACE_STATE, Number of * Multisamples: * * - This field must be set to MULTISAMPLECOUNT_1 for SINT MSRTs when * all RT channels are not written. * * And errata from the Ivybridge PRM, Volume 4 Part 1 p77, * RENDER_SURFACE_STATE, MCS Enable: * * This field must be set to 0 [MULTISAMPLECOUNT_1] for all SINT MSRTs * when all RT channels are not written. * * Note that the above SINT restrictions apply only to *MSRTs* (that is, * *multisampled* render targets). The restrictions seem to permit an MCS * if the render target is singlesampled. * * Moreover, empirically it looks that hardware can render multisampled * surfaces with RGBA8I, RGBA16I and RGBA32I. */ /* More obvious restrictions */ if (isl_surf_usage_is_display(info->usage)) return false; if (tiling == ISL_TILING_LINEAR) return false; /* From the Ivybridge PRM, Volume 4 Part 1 p72, SURFACE_STATE, Multisampled * Suface Storage Format: * * +---------------------+----------------------------------------------------------------+ * | MSFMT_MSS | Multsampled surface was/is rendered as a render target | * | MSFMT_DEPTH_STENCIL | Multisampled surface was rendered as a depth or stencil buffer | * +---------------------+----------------------------------------------------------------+ * * In the table above, MSFMT_MSS refers to ISL_MSAA_LAYOUT_ARRAY, and * MSFMT_DEPTH_STENCIL refers to ISL_MSAA_LAYOUT_INTERLEAVED. */ if (isl_surf_usage_is_depth_or_stencil(info->usage) || (info->usage & ISL_SURF_USAGE_HIZ_BIT)) require_interleaved = true; /* From the Ivybridge PRM, Volume 4 Part 1 p72, SURFACE_STATE, Multisampled * Suface Storage Format: * * If the surface’s Number of Multisamples is MULTISAMPLECOUNT_8, Width * is >= 8192 (meaning the actual surface width is >= 8193 pixels), this * field must be set to MSFMT_MSS. */ if (info->samples == 8 && info->width == 8192) require_array = true; /* From the Ivybridge PRM, Volume 4 Part 1 p72, SURFACE_STATE, Multisampled * Suface Storage Format: * * If the surface’s Number of Multisamples is MULTISAMPLECOUNT_8, * ((Depth+1) * (Height+1)) is > 4,194,304, OR if the surface’s Number * of Multisamples is MULTISAMPLECOUNT_4, ((Depth+1) * (Height+1)) is * > 8,388,608, this field must be set to MSFMT_DEPTH_STENCIL. */ if ((info->samples == 8 && info->height > 4194304u) || (info->samples == 4 && info->height > 8388608u)) require_interleaved = true; /* From the Ivybridge PRM, Volume 4 Part 1 p72, SURFACE_STATE, Multisampled * Suface Storage Format: * * This field must be set to MSFMT_DEPTH_STENCIL if Surface Format is * one of the following: I24X8_UNORM, L24X8_UNORM, A24X8_UNORM, or * R24_UNORM_X8_TYPELESS. */ if (info->format == ISL_FORMAT_I24X8_UNORM || info->format == ISL_FORMAT_L24X8_UNORM || info->format == ISL_FORMAT_A24X8_UNORM || info->format == ISL_FORMAT_R24_UNORM_X8_TYPELESS) require_interleaved = true; if (require_array && require_interleaved) return false; if (require_interleaved) { *msaa_layout = ISL_MSAA_LAYOUT_INTERLEAVED; return true; } /* Default to the array layout because it permits multisample * compression. */ *msaa_layout = ISL_MSAA_LAYOUT_ARRAY; return true; } static bool gen7_format_needs_valign2(const struct isl_device *dev, enum isl_format format) { assert(ISL_DEV_GEN(dev) == 7); /* From the Ivybridge PRM (2012-05-31), Volume 4, Part 1, Section 2.12.1, * RENDER_SURFACE_STATE Surface Vertical Alignment: * * - Value of 1 [VALIGN_4] is not supported for format YCRCB_NORMAL * (0x182), YCRCB_SWAPUVY (0x183), YCRCB_SWAPUV (0x18f), YCRCB_SWAPY * (0x190) * * - VALIGN_4 is not supported for surface format R32G32B32_FLOAT. */ return isl_format_is_yuv(format) || format == ISL_FORMAT_R32G32B32_FLOAT; } /** * @brief Filter out tiling flags that are incompatible with the surface. * * The resultant outgoing @a flags is a subset of the incoming @a flags. The * outgoing flags may be empty (0x0) if the incoming flags were too * restrictive. * * For example, if the surface will be used for a display * (ISL_SURF_USAGE_DISPLAY_BIT), then this function filters out all tiling * flags except ISL_TILING_X_BIT and ISL_TILING_LINEAR_BIT. */ void isl_gen6_filter_tiling(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, isl_tiling_flags_t *flags) { /* IVB+ requires separate stencil */ assert(ISL_DEV_USE_SEPARATE_STENCIL(dev)); /* Clear flags unsupported on this hardware */ if (ISL_DEV_GEN(dev) < 9) { *flags &= ~ISL_TILING_Yf_BIT; *flags &= ~ISL_TILING_Ys_BIT; } /* And... clear the Yf and Ys bits anyway because Anvil doesn't support * them yet. */ *flags &= ~ISL_TILING_Yf_BIT; /* FINISHME[SKL]: Support Yf */ *flags &= ~ISL_TILING_Ys_BIT; /* FINISHME[SKL]: Support Ys */ if (isl_surf_usage_is_depth(info->usage)) { /* Depth requires Y. */ *flags &= ISL_TILING_ANY_Y_MASK; } /* Separate stencil requires W tiling, and W tiling requires separate * stencil. */ if (isl_surf_usage_is_stencil(info->usage)) { *flags &= ISL_TILING_W_BIT; } else { *flags &= ~ISL_TILING_W_BIT; } /* From the SKL+ PRMs, RENDER_SURFACE_STATE:TileMode, * If Surface Format is ASTC*, this field must be TILEMODE_YMAJOR. */ if (isl_format_get_layout(info->format)->txc == ISL_TXC_ASTC) *flags &= ISL_TILING_Y0_BIT; /* MCS buffers are always Y-tiled */ if (isl_format_get_layout(info->format)->txc == ISL_TXC_MCS) *flags &= ISL_TILING_Y0_BIT; if (info->usage & (ISL_SURF_USAGE_DISPLAY_ROTATE_90_BIT | ISL_SURF_USAGE_DISPLAY_ROTATE_180_BIT | ISL_SURF_USAGE_DISPLAY_ROTATE_270_BIT)) { assert(*flags & ISL_SURF_USAGE_DISPLAY_BIT); isl_finishme("%s:%s: handle rotated display surfaces", __FILE__, __func__); } if (info->usage & (ISL_SURF_USAGE_DISPLAY_FLIP_X_BIT | ISL_SURF_USAGE_DISPLAY_FLIP_Y_BIT)) { assert(*flags & ISL_SURF_USAGE_DISPLAY_BIT); isl_finishme("%s:%s: handle flipped display surfaces", __FILE__, __func__); } if (info->usage & ISL_SURF_USAGE_DISPLAY_BIT) { /* Before Skylake, the display engine does not accept Y */ /* FINISHME[SKL]: Y tiling for display surfaces */ *flags &= (ISL_TILING_LINEAR_BIT | ISL_TILING_X_BIT); } if (info->samples > 1) { /* From the Sandybridge PRM, Volume 4 Part 1, SURFACE_STATE Tiled * Surface: * * For multisample render targets, this field must be 1 (true). MSRTs * can only be tiled. * * From the Broadwell PRM >> Volume2d: Command Structures >> * RENDER_SURFACE_STATE Tile Mode: * * If Number of Multisamples is not MULTISAMPLECOUNT_1, this field * must be YMAJOR. * * As usual, though, stencil is special and requires W-tiling. */ *flags &= (ISL_TILING_ANY_Y_MASK | ISL_TILING_W_BIT); } /* workaround */ if (ISL_DEV_GEN(dev) == 7 && gen7_format_needs_valign2(dev, info->format) && (info->usage & ISL_SURF_USAGE_RENDER_TARGET_BIT) && info->samples == 1) { /* Y tiling is illegal. From the Ivybridge PRM, Vol4 Part1 2.12.2.1, * SURFACE_STATE Surface Vertical Alignment: * * This field must be set to VALIGN_4 for all tiled Y Render Target * surfaces. */ *flags &= ~ISL_TILING_Y0_BIT; } /* From the Sandybridge PRM, Volume 1, Part 2, page 32: * * "NOTE: 128BPE Format Color Buffer ( render target ) MUST be either * TileX or Linear." * * This is necessary all the way back to 965, but is permitted on Gen7+. */ if (ISL_DEV_GEN(dev) < 7 && isl_format_get_layout(info->format)->bpb >= 128) *flags &= ~ISL_TILING_Y0_BIT; } void isl_gen7_choose_image_alignment_el(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, enum isl_tiling tiling, enum isl_dim_layout dim_layout, enum isl_msaa_layout msaa_layout, struct isl_extent3d *image_align_el) { assert(ISL_DEV_GEN(dev) == 7); /* Handled by isl_choose_image_alignment_el */ assert(info->format != ISL_FORMAT_HIZ); /* IVB+ does not support combined depthstencil. */ assert(!isl_surf_usage_is_depth_and_stencil(info->usage)); /* From the Ivy Bridge PRM, Vol. 2, Part 2, Section 6.18.4.4, * "Alignment unit size", the alignment parameters are summarized in the * following table: * * Surface Defined By | Surface Format | Align Width | Align Height * --------------------+-----------------+-------------+-------------- * DEPTH_BUFFER | D16_UNORM | 8 | 4 * | other | 4 | 4 * --------------------+-----------------+-------------+-------------- * STENCIL_BUFFER | N/A | 8 | 8 * --------------------+-----------------+-------------+-------------- * SURFACE_STATE | BC*, ETC*, EAC* | 4 | 4 * | FXT1 | 8 | 4 * | all others | HALIGN | VALIGN * ------------------------------------------------------------------- */ if (isl_surf_usage_is_depth(info->usage)) { *image_align_el = info->format == ISL_FORMAT_R16_UNORM ? isl_extent3d(8, 4, 1) : isl_extent3d(4, 4, 1); return; } else if (isl_surf_usage_is_stencil(info->usage)) { *image_align_el = isl_extent3d(8, 8, 1); return; } else if (isl_format_is_compressed(info->format)) { /* Compressed formats all have alignment equal to block size. */ *image_align_el = isl_extent3d(1, 1, 1); return; } /* Everything after this point is in the "set by Surface Horizontal or * Vertical Alignment" case. Now it's just a matter of applying * restrictions. */ /* There are no restrictions on halign beyond what's given in the table * above. We set it to the minimum value of 4 because that uses the least * memory. */ const uint32_t halign = 4; bool require_valign4 = false; /* From the Ivybridge PRM, Volume 4, Part 1, Section 2.12.1: * RENDER_SURFACE_STATE Surface Vertical Alignment: * * * This field is intended to be set to VALIGN_4 if the surface was * rendered as a depth buffer, * * * for a multisampled (4x) render target, or for a multisampled (8x) * render target, since these surfaces support only alignment of 4. * * * This field must be set to VALIGN_4 for all tiled Y Render Target * surfaces * * * Value of 1 is not supported for format YCRCB_NORMAL (0x182), * YCRCB_SWAPUVY (0x183), YCRCB_SWAPUV (0x18f), YCRCB_SWAPY (0x190) * * * If Number of Multisamples is not MULTISAMPLECOUNT_1, this field * must be set to VALIGN_4." * * The first restriction is already handled by the table above and the * second restriction is redundant with the fifth. */ if (info->samples > 1) require_valign4 = true; if (tiling == ISL_TILING_Y0 && (info->usage & ISL_SURF_USAGE_RENDER_TARGET_BIT)) require_valign4 = true; assert(!(require_valign4 && gen7_format_needs_valign2(dev, info->format))); /* We default to VALIGN_2 because it uses the least memory. */ const uint32_t valign = require_valign4 ? 4 : 2; *image_align_el = isl_extent3d(halign, valign, 1); }