/* * Copyright 2015 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ #include #include #include #include "isl.h" #include "isl_gen4.h" #include "isl_gen6.h" #include "isl_gen7.h" #include "isl_gen8.h" #include "isl_gen9.h" #include "isl_priv.h" void PRINTFLIKE(3, 4) UNUSED __isl_finishme(const char *file, int line, const char *fmt, ...) { va_list ap; char buf[512]; va_start(ap, fmt); vsnprintf(buf, sizeof(buf), fmt, ap); va_end(ap); fprintf(stderr, "%s:%d: FINISHME: %s\n", file, line, buf); } void isl_device_init(struct isl_device *dev, const struct gen_device_info *info, bool has_bit6_swizzling) { dev->info = info; dev->use_separate_stencil = ISL_DEV_GEN(dev) >= 6; dev->has_bit6_swizzling = has_bit6_swizzling; /* The ISL_DEV macros may be defined in the CFLAGS, thus hardcoding some * device properties at buildtime. Verify that the macros with the device * properties chosen during runtime. */ ISL_DEV_GEN_SANITIZE(dev); ISL_DEV_USE_SEPARATE_STENCIL_SANITIZE(dev); /* Did we break hiz or stencil? */ if (ISL_DEV_USE_SEPARATE_STENCIL(dev)) assert(info->has_hiz_and_separate_stencil); if (info->must_use_separate_stencil) assert(ISL_DEV_USE_SEPARATE_STENCIL(dev)); } /** * @brief Query the set of multisamples supported by the device. * * This function always returns non-zero, as ISL_SAMPLE_COUNT_1_BIT is always * supported. */ isl_sample_count_mask_t ATTRIBUTE_CONST isl_device_get_sample_counts(struct isl_device *dev) { if (ISL_DEV_GEN(dev) >= 9) { return ISL_SAMPLE_COUNT_1_BIT | ISL_SAMPLE_COUNT_2_BIT | ISL_SAMPLE_COUNT_4_BIT | ISL_SAMPLE_COUNT_8_BIT | ISL_SAMPLE_COUNT_16_BIT; } else if (ISL_DEV_GEN(dev) >= 8) { return ISL_SAMPLE_COUNT_1_BIT | ISL_SAMPLE_COUNT_2_BIT | ISL_SAMPLE_COUNT_4_BIT | ISL_SAMPLE_COUNT_8_BIT; } else if (ISL_DEV_GEN(dev) >= 7) { return ISL_SAMPLE_COUNT_1_BIT | ISL_SAMPLE_COUNT_4_BIT | ISL_SAMPLE_COUNT_8_BIT; } else if (ISL_DEV_GEN(dev) >= 6) { return ISL_SAMPLE_COUNT_1_BIT | ISL_SAMPLE_COUNT_4_BIT; } else { return ISL_SAMPLE_COUNT_1_BIT; } } /** * @param[out] info is written only on success */ bool isl_tiling_get_info(const struct isl_device *dev, enum isl_tiling tiling, uint32_t format_bpb, struct isl_tile_info *tile_info) { const uint32_t bs = format_bpb / 8; struct isl_extent2d logical_el, phys_B; if (tiling != ISL_TILING_LINEAR && !isl_is_pow2(format_bpb)) { /* It is possible to have non-power-of-two formats in a tiled buffer. * The easiest way to handle this is to treat the tile as if it is three * times as wide. This way no pixel will ever cross a tile boundary. * This really only works on legacy X and Y tiling formats. */ assert(tiling == ISL_TILING_X || tiling == ISL_TILING_Y0); assert(bs % 3 == 0 && isl_is_pow2(format_bpb / 3)); return isl_tiling_get_info(dev, tiling, format_bpb / 3, tile_info); } switch (tiling) { case ISL_TILING_LINEAR: assert(bs > 0); logical_el = isl_extent2d(1, 1); phys_B = isl_extent2d(bs, 1); break; case ISL_TILING_X: assert(bs > 0); logical_el = isl_extent2d(512 / bs, 8); phys_B = isl_extent2d(512, 8); break; case ISL_TILING_Y0: assert(bs > 0); logical_el = isl_extent2d(128 / bs, 32); phys_B = isl_extent2d(128, 32); break; case ISL_TILING_W: assert(bs == 1); logical_el = isl_extent2d(64, 64); /* From the Broadwell PRM Vol 2d, RENDER_SURFACE_STATE::SurfacePitch: * * "If the surface is a stencil buffer (and thus has Tile Mode set * to TILEMODE_WMAJOR), the pitch must be set to 2x the value * computed based on width, as the stencil buffer is stored with two * rows interleaved." * * This, together with the fact that stencil buffers are referred to as * being Y-tiled in the PRMs for older hardware implies that the * physical size of a W-tile is actually the same as for a Y-tile. */ phys_B = isl_extent2d(128, 32); break; case ISL_TILING_Yf: case ISL_TILING_Ys: { if (ISL_DEV_GEN(dev) < 9) return false; if (!isl_is_pow2(bs)) return false; bool is_Ys = tiling == ISL_TILING_Ys; assert(bs > 0); unsigned width = 1 << (6 + (ffs(bs) / 2) + (2 * is_Ys)); unsigned height = 1 << (6 - (ffs(bs) / 2) + (2 * is_Ys)); logical_el = isl_extent2d(width / bs, height); phys_B = isl_extent2d(width, height); break; } case ISL_TILING_HIZ: /* HiZ buffers are required to have ISL_FORMAT_HIZ which is an 8x4 * 128bpb format. The tiling has the same physical dimensions as * Y-tiling but actually has two HiZ columns per Y-tiled column. */ assert(bs == 16); logical_el = isl_extent2d(16, 16); phys_B = isl_extent2d(128, 32); break; case ISL_TILING_CCS: /* CCS surfaces are required to have one of the GENX_CCS_* formats which * have a block size of 1 or 2 bits per block and each CCS element * corresponds to one cache-line pair in the main surface. From the Sky * Lake PRM Vol. 12 in the section on planes: * * "The Color Control Surface (CCS) contains the compression status * of the cache-line pairs. The compression state of the cache-line * pair is specified by 2 bits in the CCS. Each CCS cache-line * represents an area on the main surface of 16x16 sets of 128 byte * Y-tiled cache-line-pairs. CCS is always Y tiled." * * The CCS being Y-tiled implies that it's an 8x8 grid of cache-lines. * Since each cache line corresponds to a 16x16 set of cache-line pairs, * that yields total tile area of 128x128 cache-line pairs or CCS * elements. On older hardware, each CCS element is 1 bit and the tile * is 128x256 elements. */ assert(format_bpb == 1 || format_bpb == 2); logical_el = isl_extent2d(128, 256 / format_bpb); phys_B = isl_extent2d(128, 32); break; default: unreachable("not reached"); } /* end switch */ *tile_info = (struct isl_tile_info) { .tiling = tiling, .format_bpb = format_bpb, .logical_extent_el = logical_el, .phys_extent_B = phys_B, }; return true; } /** * @param[out] tiling is set only on success */ bool isl_surf_choose_tiling(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, enum isl_tiling *tiling) { isl_tiling_flags_t tiling_flags = info->tiling_flags; if (ISL_DEV_GEN(dev) >= 6) { gen6_filter_tiling(dev, info, &tiling_flags); } else { isl_finishme("%s: gen%u", __func__, ISL_DEV_GEN(dev)); gen6_filter_tiling(dev, info, &tiling_flags); } #define CHOOSE(__tiling) \ do { \ if (tiling_flags & (1u << (__tiling))) { \ *tiling = (__tiling); \ return true; \ } \ } while (0) /* Of the tiling modes remaining, choose the one that offers the best * performance. */ if (info->dim == ISL_SURF_DIM_1D) { /* Prefer linear for 1D surfaces because they do not benefit from * tiling. To the contrary, tiling leads to wasted memory and poor * memory locality due to the swizzling and alignment restrictions * required in tiled surfaces. */ CHOOSE(ISL_TILING_LINEAR); } CHOOSE(ISL_TILING_CCS); CHOOSE(ISL_TILING_HIZ); CHOOSE(ISL_TILING_Ys); CHOOSE(ISL_TILING_Yf); CHOOSE(ISL_TILING_Y0); CHOOSE(ISL_TILING_X); CHOOSE(ISL_TILING_W); CHOOSE(ISL_TILING_LINEAR); #undef CHOOSE /* No tiling mode accomodates the inputs. */ return false; } static bool isl_choose_msaa_layout(const struct isl_device *dev, const struct isl_surf_init_info *info, enum isl_tiling tiling, enum isl_msaa_layout *msaa_layout) { if (ISL_DEV_GEN(dev) >= 8) { return gen8_choose_msaa_layout(dev, info, tiling, msaa_layout); } else if (ISL_DEV_GEN(dev) >= 7) { return gen7_choose_msaa_layout(dev, info, tiling, msaa_layout); } else if (ISL_DEV_GEN(dev) >= 6) { return gen6_choose_msaa_layout(dev, info, tiling, msaa_layout); } else { return gen4_choose_msaa_layout(dev, info, tiling, msaa_layout); } } struct isl_extent2d isl_get_interleaved_msaa_px_size_sa(uint32_t samples) { assert(isl_is_pow2(samples)); /* From the Broadwell PRM >> Volume 5: Memory Views >> Computing Mip Level * Sizes (p133): * * If the surface is multisampled and it is a depth or stencil surface * or Multisampled Surface StorageFormat in SURFACE_STATE is * MSFMT_DEPTH_STENCIL, W_L and H_L must be adjusted as follows before * proceeding: [...] */ return (struct isl_extent2d) { .width = 1 << ((ffs(samples) - 0) / 2), .height = 1 << ((ffs(samples) - 1) / 2), }; } static void isl_msaa_interleaved_scale_px_to_sa(uint32_t samples, uint32_t *width, uint32_t *height) { const struct isl_extent2d px_size_sa = isl_get_interleaved_msaa_px_size_sa(samples); if (width) *width = isl_align(*width, 2) * px_size_sa.width; if (height) *height = isl_align(*height, 2) * px_size_sa.width; } static enum isl_array_pitch_span isl_choose_array_pitch_span(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, enum isl_dim_layout dim_layout, const struct isl_extent4d *phys_level0_sa) { switch (dim_layout) { case ISL_DIM_LAYOUT_GEN9_1D: case ISL_DIM_LAYOUT_GEN4_2D: if (ISL_DEV_GEN(dev) >= 8) { /* QPitch becomes programmable in Broadwell. So choose the * most compact QPitch possible in order to conserve memory. * * From the Broadwell PRM >> Volume 2d: Command Reference: Structures * >> RENDER_SURFACE_STATE Surface QPitch (p325): * * - Software must ensure that this field is set to a value * sufficiently large such that the array slices in the surface * do not overlap. Refer to the Memory Data Formats section for * information on how surfaces are stored in memory. * * - This field specifies the distance in rows between array * slices. It is used only in the following cases: * * - Surface Array is enabled OR * - Number of Mulitsamples is not NUMSAMPLES_1 and * Multisampled Surface Storage Format set to MSFMT_MSS OR * - Surface Type is SURFTYPE_CUBE */ return ISL_ARRAY_PITCH_SPAN_COMPACT; } else if (ISL_DEV_GEN(dev) >= 7) { /* Note that Ivybridge introduces * RENDER_SURFACE_STATE.SurfaceArraySpacing, which provides the * driver more control over the QPitch. */ if (phys_level0_sa->array_len == 1) { /* The hardware will never use the QPitch. So choose the most * compact QPitch possible in order to conserve memory. */ return ISL_ARRAY_PITCH_SPAN_COMPACT; } if (isl_surf_usage_is_depth_or_stencil(info->usage) || (info->usage & ISL_SURF_USAGE_HIZ_BIT)) { /* From the Ivybridge PRM >> Volume 1 Part 1: Graphics Core >> * Section 6.18.4.7: Surface Arrays (p112): * * If Surface Array Spacing is set to ARYSPC_FULL (note that * the depth buffer and stencil buffer have an implied value of * ARYSPC_FULL): */ return ISL_ARRAY_PITCH_SPAN_FULL; } if (info->levels == 1) { /* We are able to set RENDER_SURFACE_STATE.SurfaceArraySpacing * to ARYSPC_LOD0. */ return ISL_ARRAY_PITCH_SPAN_COMPACT; } return ISL_ARRAY_PITCH_SPAN_FULL; } else if ((ISL_DEV_GEN(dev) == 5 || ISL_DEV_GEN(dev) == 6) && ISL_DEV_USE_SEPARATE_STENCIL(dev) && isl_surf_usage_is_stencil(info->usage)) { /* [ILK-SNB] Errata from the Sandy Bridge PRM >> Volume 4 Part 1: * Graphics Core >> Section 7.18.3.7: Surface Arrays: * * The separate stencil buffer does not support mip mapping, thus * the storage for LODs other than LOD 0 is not needed. */ assert(info->levels == 1); assert(phys_level0_sa->array_len == 1); return ISL_ARRAY_PITCH_SPAN_COMPACT; } else { if ((ISL_DEV_GEN(dev) == 5 || ISL_DEV_GEN(dev) == 6) && ISL_DEV_USE_SEPARATE_STENCIL(dev) && isl_surf_usage_is_stencil(info->usage)) { /* [ILK-SNB] Errata from the Sandy Bridge PRM >> Volume 4 Part 1: * Graphics Core >> Section 7.18.3.7: Surface Arrays: * * The separate stencil buffer does not support mip mapping, * thus the storage for LODs other than LOD 0 is not needed. */ assert(info->levels == 1); assert(phys_level0_sa->array_len == 1); return ISL_ARRAY_PITCH_SPAN_COMPACT; } if (phys_level0_sa->array_len == 1) { /* The hardware will never use the QPitch. So choose the most * compact QPitch possible in order to conserve memory. */ return ISL_ARRAY_PITCH_SPAN_COMPACT; } return ISL_ARRAY_PITCH_SPAN_FULL; } case ISL_DIM_LAYOUT_GEN4_3D: /* The hardware will never use the QPitch. So choose the most * compact QPitch possible in order to conserve memory. */ return ISL_ARRAY_PITCH_SPAN_COMPACT; } unreachable("bad isl_dim_layout"); return ISL_ARRAY_PITCH_SPAN_FULL; } static void isl_choose_image_alignment_el(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, enum isl_tiling tiling, enum isl_dim_layout dim_layout, enum isl_msaa_layout msaa_layout, struct isl_extent3d *image_align_el) { if (info->format == ISL_FORMAT_HIZ) { assert(ISL_DEV_GEN(dev) >= 6); /* HiZ surfaces are always aligned to 16x8 pixels in the primary surface * which works out to 2x2 HiZ elments. */ *image_align_el = isl_extent3d(2, 2, 1); return; } if (ISL_DEV_GEN(dev) >= 9) { gen9_choose_image_alignment_el(dev, info, tiling, dim_layout, msaa_layout, image_align_el); } else if (ISL_DEV_GEN(dev) >= 8) { gen8_choose_image_alignment_el(dev, info, tiling, dim_layout, msaa_layout, image_align_el); } else if (ISL_DEV_GEN(dev) >= 7) { gen7_choose_image_alignment_el(dev, info, tiling, dim_layout, msaa_layout, image_align_el); } else if (ISL_DEV_GEN(dev) >= 6) { gen6_choose_image_alignment_el(dev, info, tiling, dim_layout, msaa_layout, image_align_el); } else { gen4_choose_image_alignment_el(dev, info, tiling, dim_layout, msaa_layout, image_align_el); } } static enum isl_dim_layout isl_surf_choose_dim_layout(const struct isl_device *dev, enum isl_surf_dim logical_dim, enum isl_tiling tiling) { if (ISL_DEV_GEN(dev) >= 9) { switch (logical_dim) { case ISL_SURF_DIM_1D: /* From the Sky Lake PRM Vol. 5, "1D Surfaces": * * One-dimensional surfaces use a tiling mode of linear. * Technically, they are not tiled resources, but the Tiled * Resource Mode field in RENDER_SURFACE_STATE is still used to * indicate the alignment requirements for this linear surface * (See 1D Alignment requirements for how 4K and 64KB Tiled * Resource Modes impact alignment). Alternatively, a 1D surface * can be defined as a 2D tiled surface (e.g. TileY or TileX) with * a height of 0. * * In other words, ISL_DIM_LAYOUT_GEN9_1D is only used for linear * surfaces and, for tiled surfaces, ISL_DIM_LAYOUT_GEN4_2D is used. */ if (tiling == ISL_TILING_LINEAR) return ISL_DIM_LAYOUT_GEN9_1D; else return ISL_DIM_LAYOUT_GEN4_2D; case ISL_SURF_DIM_2D: case ISL_SURF_DIM_3D: return ISL_DIM_LAYOUT_GEN4_2D; } } else { switch (logical_dim) { case ISL_SURF_DIM_1D: case ISL_SURF_DIM_2D: return ISL_DIM_LAYOUT_GEN4_2D; case ISL_SURF_DIM_3D: return ISL_DIM_LAYOUT_GEN4_3D; } } unreachable("bad isl_surf_dim"); return ISL_DIM_LAYOUT_GEN4_2D; } /** * Calculate the physical extent of the surface's first level, in units of * surface samples. The result is aligned to the format's compression block. */ static void isl_calc_phys_level0_extent_sa(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, enum isl_dim_layout dim_layout, enum isl_tiling tiling, enum isl_msaa_layout msaa_layout, struct isl_extent4d *phys_level0_sa) { const struct isl_format_layout *fmtl = isl_format_get_layout(info->format); if (isl_format_is_yuv(info->format)) isl_finishme("%s:%s: YUV format", __FILE__, __func__); switch (info->dim) { case ISL_SURF_DIM_1D: assert(info->height == 1); assert(info->depth == 1); assert(info->samples == 1); assert(!isl_format_is_compressed(info->format)); switch (dim_layout) { case ISL_DIM_LAYOUT_GEN4_3D: unreachable("bad isl_dim_layout"); case ISL_DIM_LAYOUT_GEN9_1D: case ISL_DIM_LAYOUT_GEN4_2D: *phys_level0_sa = (struct isl_extent4d) { .w = info->width, .h = 1, .d = 1, .a = info->array_len, }; break; } break; case ISL_SURF_DIM_2D: assert(dim_layout == ISL_DIM_LAYOUT_GEN4_2D); if (tiling == ISL_TILING_Ys && info->samples > 1) isl_finishme("%s:%s: multisample TileYs layout", __FILE__, __func__); switch (msaa_layout) { case ISL_MSAA_LAYOUT_NONE: assert(info->depth == 1); assert(info->samples == 1); *phys_level0_sa = (struct isl_extent4d) { .w = isl_align_npot(info->width, fmtl->bw), .h = isl_align_npot(info->height, fmtl->bh), .d = 1, .a = info->array_len, }; break; case ISL_MSAA_LAYOUT_ARRAY: assert(info->depth == 1); assert(info->levels == 1); assert(!isl_format_is_compressed(info->format)); *phys_level0_sa = (struct isl_extent4d) { .w = info->width, .h = info->height, .d = 1, .a = info->array_len * info->samples, }; break; case ISL_MSAA_LAYOUT_INTERLEAVED: assert(info->depth == 1); assert(info->levels == 1); assert(!isl_format_is_compressed(info->format)); *phys_level0_sa = (struct isl_extent4d) { .w = info->width, .h = info->height, .d = 1, .a = info->array_len, }; isl_msaa_interleaved_scale_px_to_sa(info->samples, &phys_level0_sa->w, &phys_level0_sa->h); break; } break; case ISL_SURF_DIM_3D: assert(info->array_len == 1); assert(info->samples == 1); if (fmtl->bd > 1) { isl_finishme("%s:%s: compression block with depth > 1", __FILE__, __func__); } switch (dim_layout) { case ISL_DIM_LAYOUT_GEN9_1D: unreachable("bad isl_dim_layout"); case ISL_DIM_LAYOUT_GEN4_2D: assert(ISL_DEV_GEN(dev) >= 9); *phys_level0_sa = (struct isl_extent4d) { .w = isl_align_npot(info->width, fmtl->bw), .h = isl_align_npot(info->height, fmtl->bh), .d = 1, .a = info->depth, }; break; case ISL_DIM_LAYOUT_GEN4_3D: assert(ISL_DEV_GEN(dev) < 9); *phys_level0_sa = (struct isl_extent4d) { .w = isl_align(info->width, fmtl->bw), .h = isl_align(info->height, fmtl->bh), .d = info->depth, .a = 1, }; break; } break; } } /** * A variant of isl_calc_phys_slice0_extent_sa() specific to * ISL_DIM_LAYOUT_GEN4_2D. */ static void isl_calc_phys_slice0_extent_sa_gen4_2d( const struct isl_device *dev, const struct isl_surf_init_info *restrict info, enum isl_msaa_layout msaa_layout, const struct isl_extent3d *image_align_sa, const struct isl_extent4d *phys_level0_sa, struct isl_extent2d *phys_slice0_sa) { const struct isl_format_layout *fmtl = isl_format_get_layout(info->format); assert(phys_level0_sa->depth == 1); if (info->levels == 1) { /* Do not pad the surface to the image alignment. Instead, pad it only * to the pixel format's block alignment. * * For tiled surfaces, using a reduced alignment here avoids wasting CPU * cycles on the below mipmap layout caluclations. Reducing the * alignment here is safe because we later align the row pitch and array * pitch to the tile boundary. It is safe even for * ISL_MSAA_LAYOUT_INTERLEAVED, because phys_level0_sa is already scaled * to accomodate the interleaved samples. * * For linear surfaces, reducing the alignment here permits us to later * choose an arbitrary, non-aligned row pitch. If the surface backs * a VkBuffer, then an arbitrary pitch may be needed to accomodate * VkBufferImageCopy::bufferRowLength. */ *phys_slice0_sa = (struct isl_extent2d) { .w = isl_align_npot(phys_level0_sa->w, fmtl->bw), .h = isl_align_npot(phys_level0_sa->h, fmtl->bh), }; return; } uint32_t slice_top_w = 0; uint32_t slice_bottom_w = 0; uint32_t slice_left_h = 0; uint32_t slice_right_h = 0; uint32_t W0 = phys_level0_sa->w; uint32_t H0 = phys_level0_sa->h; for (uint32_t l = 0; l < info->levels; ++l) { uint32_t W = isl_minify(W0, l); uint32_t H = isl_minify(H0, l); uint32_t w = isl_align_npot(W, image_align_sa->w); uint32_t h = isl_align_npot(H, image_align_sa->h); if (l == 0) { slice_top_w = w; slice_left_h = h; slice_right_h = h; } else if (l == 1) { slice_bottom_w = w; slice_left_h += h; } else if (l == 2) { slice_bottom_w += w; slice_right_h += h; } else { slice_right_h += h; } } *phys_slice0_sa = (struct isl_extent2d) { .w = MAX(slice_top_w, slice_bottom_w), .h = MAX(slice_left_h, slice_right_h), }; } /** * A variant of isl_calc_phys_slice0_extent_sa() specific to * ISL_DIM_LAYOUT_GEN4_3D. */ static void isl_calc_phys_slice0_extent_sa_gen4_3d( const struct isl_device *dev, const struct isl_surf_init_info *restrict info, const struct isl_extent3d *image_align_sa, const struct isl_extent4d *phys_level0_sa, struct isl_extent2d *phys_slice0_sa) { assert(info->samples == 1); assert(phys_level0_sa->array_len == 1); uint32_t slice_w = 0; uint32_t slice_h = 0; uint32_t W0 = phys_level0_sa->w; uint32_t H0 = phys_level0_sa->h; uint32_t D0 = phys_level0_sa->d; for (uint32_t l = 0; l < info->levels; ++l) { uint32_t level_w = isl_align_npot(isl_minify(W0, l), image_align_sa->w); uint32_t level_h = isl_align_npot(isl_minify(H0, l), image_align_sa->h); uint32_t level_d = isl_align_npot(isl_minify(D0, l), image_align_sa->d); uint32_t max_layers_horiz = MIN(level_d, 1u << l); uint32_t max_layers_vert = isl_align(level_d, 1u << l) / (1u << l); slice_w = MAX(slice_w, level_w * max_layers_horiz); slice_h += level_h * max_layers_vert; } *phys_slice0_sa = (struct isl_extent2d) { .w = slice_w, .h = slice_h, }; } /** * A variant of isl_calc_phys_slice0_extent_sa() specific to * ISL_DIM_LAYOUT_GEN9_1D. */ static void isl_calc_phys_slice0_extent_sa_gen9_1d( const struct isl_device *dev, const struct isl_surf_init_info *restrict info, const struct isl_extent3d *image_align_sa, const struct isl_extent4d *phys_level0_sa, struct isl_extent2d *phys_slice0_sa) { MAYBE_UNUSED const struct isl_format_layout *fmtl = isl_format_get_layout(info->format); assert(phys_level0_sa->height == 1); assert(phys_level0_sa->depth == 1); assert(info->samples == 1); assert(image_align_sa->w >= fmtl->bw); uint32_t slice_w = 0; const uint32_t W0 = phys_level0_sa->w; for (uint32_t l = 0; l < info->levels; ++l) { uint32_t W = isl_minify(W0, l); uint32_t w = isl_align_npot(W, image_align_sa->w); slice_w += w; } *phys_slice0_sa = isl_extent2d(slice_w, 1); } /** * Calculate the physical extent of the surface's first array slice, in units * of surface samples. If the surface is multi-leveled, then the result will * be aligned to \a image_align_sa. */ static void isl_calc_phys_slice0_extent_sa(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, enum isl_dim_layout dim_layout, enum isl_msaa_layout msaa_layout, const struct isl_extent3d *image_align_sa, const struct isl_extent4d *phys_level0_sa, struct isl_extent2d *phys_slice0_sa) { switch (dim_layout) { case ISL_DIM_LAYOUT_GEN9_1D: isl_calc_phys_slice0_extent_sa_gen9_1d(dev, info, image_align_sa, phys_level0_sa, phys_slice0_sa); return; case ISL_DIM_LAYOUT_GEN4_2D: isl_calc_phys_slice0_extent_sa_gen4_2d(dev, info, msaa_layout, image_align_sa, phys_level0_sa, phys_slice0_sa); return; case ISL_DIM_LAYOUT_GEN4_3D: isl_calc_phys_slice0_extent_sa_gen4_3d(dev, info, image_align_sa, phys_level0_sa, phys_slice0_sa); return; } } /** * Calculate the pitch between physical array slices, in units of rows of * surface elements. */ static uint32_t isl_calc_array_pitch_el_rows(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, const struct isl_tile_info *tile_info, enum isl_dim_layout dim_layout, enum isl_array_pitch_span array_pitch_span, const struct isl_extent3d *image_align_sa, const struct isl_extent4d *phys_level0_sa, const struct isl_extent2d *phys_slice0_sa) { const struct isl_format_layout *fmtl = isl_format_get_layout(info->format); uint32_t pitch_sa_rows = 0; switch (dim_layout) { case ISL_DIM_LAYOUT_GEN9_1D: /* Each row is an array slice */ pitch_sa_rows = 1; break; case ISL_DIM_LAYOUT_GEN4_2D: switch (array_pitch_span) { case ISL_ARRAY_PITCH_SPAN_COMPACT: pitch_sa_rows = isl_align_npot(phys_slice0_sa->h, image_align_sa->h); break; case ISL_ARRAY_PITCH_SPAN_FULL: { /* The QPitch equation is found in the Broadwell PRM >> Volume 5: * Memory Views >> Common Surface Formats >> Surface Layout >> 2D * Surfaces >> Surface Arrays. */ uint32_t H0_sa = phys_level0_sa->h; uint32_t H1_sa = isl_minify(H0_sa, 1); uint32_t h0_sa = isl_align_npot(H0_sa, image_align_sa->h); uint32_t h1_sa = isl_align_npot(H1_sa, image_align_sa->h); uint32_t m; if (ISL_DEV_GEN(dev) >= 7) { /* The QPitch equation changed slightly in Ivybridge. */ m = 12; } else { m = 11; } pitch_sa_rows = h0_sa + h1_sa + (m * image_align_sa->h); if (ISL_DEV_GEN(dev) == 6 && info->samples > 1 && (info->height % 4 == 1)) { /* [SNB] Errata from the Sandy Bridge PRM >> Volume 4 Part 1: * Graphics Core >> Section 7.18.3.7: Surface Arrays: * * [SNB] Errata: Sampler MSAA Qpitch will be 4 greater than * the value calculated in the equation above , for every * other odd Surface Height starting from 1 i.e. 1,5,9,13. * * XXX(chadv): Is the errata natural corollary of the physical * layout of interleaved samples? */ pitch_sa_rows += 4; } pitch_sa_rows = isl_align_npot(pitch_sa_rows, fmtl->bh); } /* end case */ break; } break; case ISL_DIM_LAYOUT_GEN4_3D: assert(array_pitch_span == ISL_ARRAY_PITCH_SPAN_COMPACT); pitch_sa_rows = isl_align_npot(phys_slice0_sa->h, image_align_sa->h); break; default: unreachable("bad isl_dim_layout"); break; } assert(pitch_sa_rows % fmtl->bh == 0); uint32_t pitch_el_rows = pitch_sa_rows / fmtl->bh; if (ISL_DEV_GEN(dev) >= 9 && fmtl->txc == ISL_TXC_CCS) { /* * From the Sky Lake PRM Vol 7, "MCS Buffer for Render Target(s)" (p. 632): * * "Mip-mapped and arrayed surfaces are supported with MCS buffer * layout with these alignments in the RT space: Horizontal * Alignment = 128 and Vertical Alignment = 64." * * From the Sky Lake PRM Vol. 2d, "RENDER_SURFACE_STATE" (p. 435): * * "For non-multisampled render target's CCS auxiliary surface, * QPitch must be computed with Horizontal Alignment = 128 and * Surface Vertical Alignment = 256. These alignments are only for * CCS buffer and not for associated render target." * * The first restriction is already handled by isl_choose_image_alignment_el * but the second restriction, which is an extension of the first, only * applies to qpitch and must be applied here. */ assert(fmtl->bh == 4); pitch_el_rows = isl_align(pitch_el_rows, 256 / 4); } if (ISL_DEV_GEN(dev) >= 9 && info->dim == ISL_SURF_DIM_3D && tile_info->tiling != ISL_TILING_LINEAR) { /* From the Skylake BSpec >> RENDER_SURFACE_STATE >> Surface QPitch: * * Tile Mode != Linear: This field must be set to an integer multiple * of the tile height */ pitch_el_rows = isl_align(pitch_el_rows, tile_info->logical_extent_el.height); } return pitch_el_rows; } /** * Calculate the pitch of each surface row, in bytes. */ static uint32_t isl_calc_linear_row_pitch(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, const struct isl_extent2d *phys_slice0_sa) { const struct isl_format_layout *fmtl = isl_format_get_layout(info->format); uint32_t row_pitch = info->min_pitch; /* First, align the surface to a cache line boundary, as the PRM explains * below. * * From the Broadwell PRM >> Volume 5: Memory Views >> Common Surface * Formats >> Surface Padding Requirements >> Render Target and Media * Surfaces: * * The data port accesses data (pixels) outside of the surface if they * are contained in the same cache request as pixels that are within the * surface. These pixels will not be returned by the requesting message, * however if these pixels lie outside of defined pages in the GTT, * a GTT error will result when the cache request is processed. In order * to avoid these GTT errors, “padding” at the bottom of the surface is * sometimes necessary. * * From the Broadwell PRM >> Volume 5: Memory Views >> Common Surface * Formats >> Surface Padding Requirements >> Sampling Engine Surfaces: * * The sampling engine accesses texels outside of the surface if they * are contained in the same cache line as texels that are within the * surface. These texels will not participate in any calculation * performed by the sampling engine and will not affect the result of * any sampling engine operation, however if these texels lie outside of * defined pages in the GTT, a GTT error will result when the cache line * is accessed. In order to avoid these GTT errors, “padding” at the * bottom and right side of a sampling engine surface is sometimes * necessary. * * It is possible that a cache line will straddle a page boundary if the * base address or pitch is not aligned. All pages included in the cache * lines that are part of the surface must map to valid GTT entries to * avoid errors. To determine the necessary padding on the bottom and * right side of the surface, refer to the table in Alignment Unit Size * section for the i and j parameters for the surface format in use. The * surface must then be extended to the next multiple of the alignment * unit size in each dimension, and all texels contained in this * extended surface must have valid GTT entries. * * For example, suppose the surface size is 15 texels by 10 texels and * the alignment parameters are i=4 and j=2. In this case, the extended * surface would be 16 by 10. Note that these calculations are done in * texels, and must be converted to bytes based on the surface format * being used to determine whether additional pages need to be defined. */ assert(phys_slice0_sa->w % fmtl->bw == 0); const uint32_t bs = fmtl->bpb / 8; row_pitch = MAX(row_pitch, bs * (phys_slice0_sa->w / fmtl->bw)); /* From the Broadwel PRM >> Volume 2d: Command Reference: Structures >> * RENDER_SURFACE_STATE Surface Pitch (p349): * * - For linear render target surfaces and surfaces accessed with the * typed data port messages, the pitch must be a multiple of the * element size for non-YUV surface formats. Pitch must be * a multiple of 2 * element size for YUV surface formats. * * - [Requirements for SURFTYPE_BUFFER and SURFTYPE_STRBUF, which we * ignore because isl doesn't do buffers.] * * - For other linear surfaces, the pitch can be any multiple of * bytes. */ if (info->usage & ISL_SURF_USAGE_RENDER_TARGET_BIT) { if (isl_format_is_yuv(info->format)) { row_pitch = isl_align_npot(row_pitch, 2 * bs); } else { row_pitch = isl_align_npot(row_pitch, bs); } } return row_pitch; } /** * Calculate and apply any padding required for the surface. * * @param[inout] total_h_el is updated with the new height * @param[out] pad_bytes is overwritten with additional padding requirements. */ static void isl_apply_surface_padding(const struct isl_device *dev, const struct isl_surf_init_info *restrict info, const struct isl_tile_info *tile_info, uint32_t *total_h_el, uint32_t *pad_bytes) { const struct isl_format_layout *fmtl = isl_format_get_layout(info->format); *pad_bytes = 0; /* From the Broadwell PRM >> Volume 5: Memory Views >> Common Surface * Formats >> Surface Padding Requirements >> Render Target and Media * Surfaces: * * The data port accesses data (pixels) outside of the surface if they * are contained in the same cache request as pixels that are within the * surface. These pixels will not be returned by the requesting message, * however if these pixels lie outside of defined pages in the GTT, * a GTT error will result when the cache request is processed. In * order to avoid these GTT errors, “padding” at the bottom of the * surface is sometimes necessary. * * From the Broadwell PRM >> Volume 5: Memory Views >> Common Surface * Formats >> Surface Padding Requirements >> Sampling Engine Surfaces: * * ... Lots of padding requirements, all listed separately below. */ /* We can safely ignore the first padding requirement, quoted below, * because isl doesn't do buffers. * * - [pre-BDW] For buffers, which have no inherent “height,” padding * requirements are different. A buffer must be padded to the next * multiple of 256 array elements, with an additional 16 bytes added * beyond that to account for the L1 cache line. */ /* * - For compressed textures [...], padding at the bottom of the surface * is to an even compressed row. */ if (isl_format_is_compressed(info->format)) *total_h_el = isl_align(*total_h_el, 2); /* * - For cube surfaces, an additional two rows of padding are required * at the bottom of the surface. */ if (info->usage & ISL_SURF_USAGE_CUBE_BIT) *total_h_el += 2; /* * - For packed YUV, 96 bpt, 48 bpt, and 24 bpt surface formats, * additional padding is required. These surfaces require an extra row * plus 16 bytes of padding at the bottom in addition to the general * padding requirements. */ if (isl_format_is_yuv(info->format) && (fmtl->bpb == 96 || fmtl->bpb == 48|| fmtl->bpb == 24)) { *total_h_el += 1; *pad_bytes += 16; } /* * - For linear surfaces, additional padding of 64 bytes is required at * the bottom of the surface. This is in addition to the padding * required above. */ if (tile_info->tiling == ISL_TILING_LINEAR) *pad_bytes += 64; /* The below text weakens, not strengthens, the padding requirements for * linear surfaces. Therefore we can safely ignore it. * * - [BDW+] For SURFTYPE_BUFFER, SURFTYPE_1D, and SURFTYPE_2D non-array, * non-MSAA, non-mip-mapped surfaces in linear memory, the only * padding requirement is to the next aligned 64-byte boundary beyond * the end of the surface. The rest of the padding requirements * documented above do not apply to these surfaces. */ /* * - [SKL+] For SURFTYPE_2D and SURFTYPE_3D with linear mode and * height % 4 != 0, the surface must be padded with * 4-(height % 4)*Surface Pitch # of bytes. */ if (ISL_DEV_GEN(dev) >= 9 && tile_info->tiling == ISL_TILING_LINEAR && (info->dim == ISL_SURF_DIM_2D || info->dim == ISL_SURF_DIM_3D)) { *total_h_el = isl_align(*total_h_el, 4); } /* * - [SKL+] For SURFTYPE_1D with linear mode, the surface must be padded * to 4 times the Surface Pitch # of bytes */ if (ISL_DEV_GEN(dev) >= 9 && tile_info->tiling == ISL_TILING_LINEAR && info->dim == ISL_SURF_DIM_1D) { *total_h_el += 4; } } bool isl_surf_init_s(const struct isl_device *dev, struct isl_surf *surf, const struct isl_surf_init_info *restrict info) { const struct isl_format_layout *fmtl = isl_format_get_layout(info->format); const struct isl_extent4d logical_level0_px = { .w = info->width, .h = info->height, .d = info->depth, .a = info->array_len, }; enum isl_tiling tiling; if (!isl_surf_choose_tiling(dev, info, &tiling)) return false; struct isl_tile_info tile_info; if (!isl_tiling_get_info(dev, tiling, fmtl->bpb, &tile_info)) return false; const enum isl_dim_layout dim_layout = isl_surf_choose_dim_layout(dev, info->dim, tiling); enum isl_msaa_layout msaa_layout; if (!isl_choose_msaa_layout(dev, info, tiling, &msaa_layout)) return false; struct isl_extent3d image_align_el; isl_choose_image_alignment_el(dev, info, tiling, dim_layout, msaa_layout, &image_align_el); struct isl_extent3d image_align_sa = isl_extent3d_el_to_sa(info->format, image_align_el); struct isl_extent4d phys_level0_sa; isl_calc_phys_level0_extent_sa(dev, info, dim_layout, tiling, msaa_layout, &phys_level0_sa); assert(phys_level0_sa.w % fmtl->bw == 0); assert(phys_level0_sa.h % fmtl->bh == 0); enum isl_array_pitch_span array_pitch_span = isl_choose_array_pitch_span(dev, info, dim_layout, &phys_level0_sa); struct isl_extent2d phys_slice0_sa; isl_calc_phys_slice0_extent_sa(dev, info, dim_layout, msaa_layout, &image_align_sa, &phys_level0_sa, &phys_slice0_sa); assert(phys_slice0_sa.w % fmtl->bw == 0); assert(phys_slice0_sa.h % fmtl->bh == 0); const uint32_t array_pitch_el_rows = isl_calc_array_pitch_el_rows(dev, info, &tile_info, dim_layout, array_pitch_span, &image_align_sa, &phys_level0_sa, &phys_slice0_sa); uint32_t total_h_el = phys_level0_sa.array_len * array_pitch_el_rows; uint32_t pad_bytes; isl_apply_surface_padding(dev, info, &tile_info, &total_h_el, &pad_bytes); uint32_t row_pitch, size, base_alignment; if (tiling == ISL_TILING_LINEAR) { row_pitch = isl_calc_linear_row_pitch(dev, info, &phys_slice0_sa); size = row_pitch * total_h_el + pad_bytes; /* From the Broadwell PRM Vol 2d, RENDER_SURFACE_STATE::SurfaceBaseAddress: * * "The Base Address for linear render target surfaces and surfaces * accessed with the typed surface read/write data port messages must * be element-size aligned, for non-YUV surface formats, or a * multiple of 2 element-sizes for YUV surface formats. Other linear * surfaces have no alignment requirements (byte alignment is * sufficient.)" */ base_alignment = MAX(1, info->min_alignment); if (info->usage & ISL_SURF_USAGE_RENDER_TARGET_BIT) { if (isl_format_is_yuv(info->format)) { base_alignment = MAX(base_alignment, fmtl->bpb / 4); } else { base_alignment = MAX(base_alignment, fmtl->bpb / 8); } } base_alignment = isl_round_up_to_power_of_two(base_alignment); } else { assert(fmtl->bpb % tile_info.format_bpb == 0); const uint32_t tile_el_scale = fmtl->bpb / tile_info.format_bpb; assert(phys_slice0_sa.w % fmtl->bw == 0); const uint32_t total_w_el = phys_slice0_sa.width / fmtl->bw; const uint32_t total_w_tl = isl_align_div(total_w_el * tile_el_scale, tile_info.logical_extent_el.width); row_pitch = total_w_tl * tile_info.phys_extent_B.width; if (row_pitch < info->min_pitch) { row_pitch = isl_align_npot(info->min_pitch, tile_info.phys_extent_B.width); } total_h_el += isl_align_div_npot(pad_bytes, row_pitch); const uint32_t total_h_tl = isl_align_div(total_h_el, tile_info.logical_extent_el.height); size = total_h_tl * tile_info.phys_extent_B.height * row_pitch; const uint32_t tile_size = tile_info.phys_extent_B.width * tile_info.phys_extent_B.height; assert(isl_is_pow2(info->min_alignment) && isl_is_pow2(tile_size)); base_alignment = MAX(info->min_alignment, tile_size); } *surf = (struct isl_surf) { .dim = info->dim, .dim_layout = dim_layout, .msaa_layout = msaa_layout, .tiling = tiling, .format = info->format, .levels = info->levels, .samples = info->samples, .image_alignment_el = image_align_el, .logical_level0_px = logical_level0_px, .phys_level0_sa = phys_level0_sa, .size = size, .alignment = base_alignment, .row_pitch = row_pitch, .array_pitch_el_rows = array_pitch_el_rows, .array_pitch_span = array_pitch_span, .usage = info->usage, }; return true; } void isl_surf_get_tile_info(const struct isl_device *dev, const struct isl_surf *surf, struct isl_tile_info *tile_info) { const struct isl_format_layout *fmtl = isl_format_get_layout(surf->format); isl_tiling_get_info(dev, surf->tiling, fmtl->bpb, tile_info); } void isl_surf_get_hiz_surf(const struct isl_device *dev, const struct isl_surf *surf, struct isl_surf *hiz_surf) { assert(ISL_DEV_GEN(dev) >= 5 && ISL_DEV_USE_SEPARATE_STENCIL(dev)); /* Multisampled depth is always interleaved */ assert(surf->msaa_layout == ISL_MSAA_LAYOUT_NONE || surf->msaa_layout == ISL_MSAA_LAYOUT_INTERLEAVED); isl_surf_init(dev, hiz_surf, .dim = ISL_SURF_DIM_2D, .format = ISL_FORMAT_HIZ, .width = surf->logical_level0_px.width, .height = surf->logical_level0_px.height, .depth = 1, .levels = surf->levels, .array_len = surf->logical_level0_px.array_len, /* On SKL+, HiZ is always single-sampled */ .samples = ISL_DEV_GEN(dev) >= 9 ? 1 : surf->samples, .usage = ISL_SURF_USAGE_HIZ_BIT, .tiling_flags = ISL_TILING_HIZ_BIT); } void isl_surf_get_mcs_surf(const struct isl_device *dev, const struct isl_surf *surf, struct isl_surf *mcs_surf) { /* It must be multisampled with an array layout */ assert(surf->samples > 1 && surf->msaa_layout == ISL_MSAA_LAYOUT_ARRAY); /* The following are true of all multisampled surfaces */ assert(surf->dim == ISL_SURF_DIM_2D); assert(surf->levels == 1); assert(surf->logical_level0_px.depth == 1); enum isl_format mcs_format; switch (surf->samples) { case 2: mcs_format = ISL_FORMAT_MCS_2X; break; case 4: mcs_format = ISL_FORMAT_MCS_4X; break; case 8: mcs_format = ISL_FORMAT_MCS_8X; break; case 16: mcs_format = ISL_FORMAT_MCS_16X; break; default: unreachable("Invalid sample count"); } isl_surf_init(dev, mcs_surf, .dim = ISL_SURF_DIM_2D, .format = mcs_format, .width = surf->logical_level0_px.width, .height = surf->logical_level0_px.height, .depth = 1, .levels = 1, .array_len = surf->logical_level0_px.array_len, .samples = 1, /* MCS surfaces are really single-sampled */ .usage = ISL_SURF_USAGE_MCS_BIT, .tiling_flags = ISL_TILING_Y0_BIT); } bool isl_surf_get_ccs_surf(const struct isl_device *dev, const struct isl_surf *surf, struct isl_surf *ccs_surf) { assert(surf->samples == 1 && surf->msaa_layout == ISL_MSAA_LAYOUT_NONE); assert(ISL_DEV_GEN(dev) >= 7); assert(ISL_DEV_GEN(dev) >= 8 || surf->dim == ISL_SURF_DIM_2D); assert(surf->logical_level0_px.depth == 1); /* TODO: More conditions where it can fail. */ enum isl_format ccs_format; if (ISL_DEV_GEN(dev) >= 9) { if (!isl_tiling_is_any_y(surf->tiling)) return false; switch (isl_format_get_layout(surf->format)->bpb) { case 32: ccs_format = ISL_FORMAT_GEN9_CCS_32BPP; break; case 64: ccs_format = ISL_FORMAT_GEN9_CCS_64BPP; break; case 128: ccs_format = ISL_FORMAT_GEN9_CCS_128BPP; break; default: return false; } } else if (surf->tiling == ISL_TILING_Y0) { switch (isl_format_get_layout(surf->format)->bpb) { case 32: ccs_format = ISL_FORMAT_GEN7_CCS_32BPP_Y; break; case 64: ccs_format = ISL_FORMAT_GEN7_CCS_64BPP_Y; break; case 128: ccs_format = ISL_FORMAT_GEN7_CCS_128BPP_Y; break; default: return false; } } else if (surf->tiling == ISL_TILING_X) { switch (isl_format_get_layout(surf->format)->bpb) { case 32: ccs_format = ISL_FORMAT_GEN7_CCS_32BPP_X; break; case 64: ccs_format = ISL_FORMAT_GEN7_CCS_64BPP_X; break; case 128: ccs_format = ISL_FORMAT_GEN7_CCS_128BPP_X; break; default: return false; } } else { return false; } isl_surf_init(dev, ccs_surf, .dim = ISL_SURF_DIM_2D, .format = ccs_format, .width = surf->logical_level0_px.width, .height = surf->logical_level0_px.height, .depth = 1, .levels = surf->levels, .array_len = surf->logical_level0_px.array_len, .samples = 1, .usage = ISL_SURF_USAGE_CCS_BIT, .tiling_flags = ISL_TILING_CCS_BIT); return true; } void isl_surf_fill_state_s(const struct isl_device *dev, void *state, const struct isl_surf_fill_state_info *restrict info) { #ifndef NDEBUG isl_surf_usage_flags_t _base_usage = info->view->usage & (ISL_SURF_USAGE_RENDER_TARGET_BIT | ISL_SURF_USAGE_TEXTURE_BIT | ISL_SURF_USAGE_STORAGE_BIT); /* They may only specify one of the above bits at a time */ assert(__builtin_popcount(_base_usage) == 1); /* The only other allowed bit is ISL_SURF_USAGE_CUBE_BIT */ assert((info->view->usage & ~ISL_SURF_USAGE_CUBE_BIT) == _base_usage); #endif if (info->surf->dim == ISL_SURF_DIM_3D) { assert(info->view->base_array_layer + info->view->array_len <= info->surf->logical_level0_px.depth); } else { assert(info->view->base_array_layer + info->view->array_len <= info->surf->logical_level0_px.array_len); } switch (ISL_DEV_GEN(dev)) { case 4: if (ISL_DEV_IS_G4X(dev)) { /* G45 surface state is the same as gen5 */ isl_gen5_surf_fill_state_s(dev, state, info); } else { isl_gen4_surf_fill_state_s(dev, state, info); } break; case 5: isl_gen5_surf_fill_state_s(dev, state, info); break; case 6: isl_gen6_surf_fill_state_s(dev, state, info); break; case 7: if (ISL_DEV_IS_HASWELL(dev)) { isl_gen75_surf_fill_state_s(dev, state, info); } else { isl_gen7_surf_fill_state_s(dev, state, info); } break; case 8: isl_gen8_surf_fill_state_s(dev, state, info); break; case 9: isl_gen9_surf_fill_state_s(dev, state, info); break; default: assert(!"Cannot fill surface state for this gen"); } } void isl_buffer_fill_state_s(const struct isl_device *dev, void *state, const struct isl_buffer_fill_state_info *restrict info) { switch (ISL_DEV_GEN(dev)) { case 4: case 5: /* Gen 4-5 are all the same when it comes to buffer surfaces */ isl_gen5_buffer_fill_state_s(state, info); break; case 6: isl_gen6_buffer_fill_state_s(state, info); break; case 7: if (ISL_DEV_IS_HASWELL(dev)) { isl_gen75_buffer_fill_state_s(state, info); } else { isl_gen7_buffer_fill_state_s(state, info); } break; case 8: isl_gen8_buffer_fill_state_s(state, info); break; case 9: isl_gen9_buffer_fill_state_s(state, info); break; default: assert(!"Cannot fill surface state for this gen"); } } /** * A variant of isl_surf_get_image_offset_sa() specific to * ISL_DIM_LAYOUT_GEN4_2D. */ static void get_image_offset_sa_gen4_2d(const struct isl_surf *surf, uint32_t level, uint32_t logical_array_layer, uint32_t *x_offset_sa, uint32_t *y_offset_sa) { assert(level < surf->levels); if (surf->dim == ISL_SURF_DIM_3D) assert(logical_array_layer < surf->logical_level0_px.depth); else assert(logical_array_layer < surf->logical_level0_px.array_len); const struct isl_extent3d image_align_sa = isl_surf_get_image_alignment_sa(surf); const uint32_t W0 = surf->phys_level0_sa.width; const uint32_t H0 = surf->phys_level0_sa.height; const uint32_t phys_layer = logical_array_layer * (surf->msaa_layout == ISL_MSAA_LAYOUT_ARRAY ? surf->samples : 1); uint32_t x = 0; uint32_t y = phys_layer * isl_surf_get_array_pitch_sa_rows(surf); for (uint32_t l = 0; l < level; ++l) { if (l == 1) { uint32_t W = isl_minify(W0, l); x += isl_align_npot(W, image_align_sa.w); } else { uint32_t H = isl_minify(H0, l); y += isl_align_npot(H, image_align_sa.h); } } *x_offset_sa = x; *y_offset_sa = y; } /** * A variant of isl_surf_get_image_offset_sa() specific to * ISL_DIM_LAYOUT_GEN4_3D. */ static void get_image_offset_sa_gen4_3d(const struct isl_surf *surf, uint32_t level, uint32_t logical_z_offset_px, uint32_t *x_offset_sa, uint32_t *y_offset_sa) { assert(level < surf->levels); assert(logical_z_offset_px < isl_minify(surf->phys_level0_sa.depth, level)); assert(surf->phys_level0_sa.array_len == 1); const struct isl_extent3d image_align_sa = isl_surf_get_image_alignment_sa(surf); const uint32_t W0 = surf->phys_level0_sa.width; const uint32_t H0 = surf->phys_level0_sa.height; const uint32_t D0 = surf->phys_level0_sa.depth; uint32_t x = 0; uint32_t y = 0; for (uint32_t l = 0; l < level; ++l) { const uint32_t level_h = isl_align_npot(isl_minify(H0, l), image_align_sa.h); const uint32_t level_d = isl_align_npot(isl_minify(D0, l), image_align_sa.d); const uint32_t max_layers_vert = isl_align(level_d, 1u << l) / (1u << l); y += level_h * max_layers_vert; } const uint32_t level_w = isl_align_npot(isl_minify(W0, level), image_align_sa.w); const uint32_t level_h = isl_align_npot(isl_minify(H0, level), image_align_sa.h); const uint32_t level_d = isl_align_npot(isl_minify(D0, level), image_align_sa.d); const uint32_t max_layers_horiz = MIN(level_d, 1u << level); x += level_w * (logical_z_offset_px % max_layers_horiz); y += level_h * (logical_z_offset_px / max_layers_horiz); *x_offset_sa = x; *y_offset_sa = y; } /** * A variant of isl_surf_get_image_offset_sa() specific to * ISL_DIM_LAYOUT_GEN9_1D. */ static void get_image_offset_sa_gen9_1d(const struct isl_surf *surf, uint32_t level, uint32_t layer, uint32_t *x_offset_sa, uint32_t *y_offset_sa) { assert(level < surf->levels); assert(layer < surf->phys_level0_sa.array_len); assert(surf->phys_level0_sa.height == 1); assert(surf->phys_level0_sa.depth == 1); assert(surf->samples == 1); const uint32_t W0 = surf->phys_level0_sa.width; const struct isl_extent3d image_align_sa = isl_surf_get_image_alignment_sa(surf); uint32_t x = 0; for (uint32_t l = 0; l < level; ++l) { uint32_t W = isl_minify(W0, l); uint32_t w = isl_align_npot(W, image_align_sa.w); x += w; } *x_offset_sa = x; *y_offset_sa = layer * isl_surf_get_array_pitch_sa_rows(surf); } /** * Calculate the offset, in units of surface samples, to a subimage in the * surface. * * @invariant level < surface levels * @invariant logical_array_layer < logical array length of surface * @invariant logical_z_offset_px < logical depth of surface at level */ void isl_surf_get_image_offset_sa(const struct isl_surf *surf, uint32_t level, uint32_t logical_array_layer, uint32_t logical_z_offset_px, uint32_t *x_offset_sa, uint32_t *y_offset_sa) { assert(level < surf->levels); assert(logical_array_layer < surf->logical_level0_px.array_len); assert(logical_z_offset_px < isl_minify(surf->logical_level0_px.depth, level)); switch (surf->dim_layout) { case ISL_DIM_LAYOUT_GEN9_1D: get_image_offset_sa_gen9_1d(surf, level, logical_array_layer, x_offset_sa, y_offset_sa); break; case ISL_DIM_LAYOUT_GEN4_2D: get_image_offset_sa_gen4_2d(surf, level, logical_array_layer + logical_z_offset_px, x_offset_sa, y_offset_sa); break; case ISL_DIM_LAYOUT_GEN4_3D: get_image_offset_sa_gen4_3d(surf, level, logical_z_offset_px, x_offset_sa, y_offset_sa); break; default: unreachable("not reached"); } } void isl_surf_get_image_offset_el(const struct isl_surf *surf, uint32_t level, uint32_t logical_array_layer, uint32_t logical_z_offset_px, uint32_t *x_offset_el, uint32_t *y_offset_el) { const struct isl_format_layout *fmtl = isl_format_get_layout(surf->format); assert(level < surf->levels); assert(logical_array_layer < surf->logical_level0_px.array_len); assert(logical_z_offset_px < isl_minify(surf->logical_level0_px.depth, level)); uint32_t x_offset_sa, y_offset_sa; isl_surf_get_image_offset_sa(surf, level, logical_array_layer, logical_z_offset_px, &x_offset_sa, &y_offset_sa); *x_offset_el = x_offset_sa / fmtl->bw; *y_offset_el = y_offset_sa / fmtl->bh; } void isl_tiling_get_intratile_offset_el(const struct isl_device *dev, enum isl_tiling tiling, uint8_t bs, uint32_t row_pitch, uint32_t total_x_offset_el, uint32_t total_y_offset_el, uint32_t *base_address_offset, uint32_t *x_offset_el, uint32_t *y_offset_el) { if (tiling == ISL_TILING_LINEAR) { *base_address_offset = total_y_offset_el * row_pitch + total_x_offset_el * bs; *x_offset_el = 0; *y_offset_el = 0; return; } const uint32_t bpb = bs * 8; struct isl_tile_info tile_info; isl_tiling_get_info(dev, tiling, bpb, &tile_info); assert(row_pitch % tile_info.phys_extent_B.width == 0); /* For non-power-of-two formats, we need the address to be both tile and * element-aligned. The easiest way to achieve this is to work with a tile * that is three times as wide as the regular tile. * * The tile info returned by get_tile_info has a logical size that is an * integer number of tile_info.format_bpb size elements. To scale the * tile, we scale up the physical width and then treat the logical tile * size as if it has bpb size elements. */ const uint32_t tile_el_scale = bpb / tile_info.format_bpb; tile_info.phys_extent_B.width *= tile_el_scale; /* Compute the offset into the tile */ *x_offset_el = total_x_offset_el % tile_info.logical_extent_el.w; *y_offset_el = total_y_offset_el % tile_info.logical_extent_el.h; /* Compute the offset of the tile in units of whole tiles */ uint32_t x_offset_tl = total_x_offset_el / tile_info.logical_extent_el.w; uint32_t y_offset_tl = total_y_offset_el / tile_info.logical_extent_el.h; *base_address_offset = y_offset_tl * tile_info.phys_extent_B.h * row_pitch + x_offset_tl * tile_info.phys_extent_B.h * tile_info.phys_extent_B.w; } uint32_t isl_surf_get_depth_format(const struct isl_device *dev, const struct isl_surf *surf) { /* Support for separate stencil buffers began in gen5. Support for * interleaved depthstencil buffers ceased in gen7. The intermediate gens, * those that supported separate and interleaved stencil, were gen5 and * gen6. * * For a list of all available formats, see the Sandybridge PRM >> Volume * 2 Part 1: 3D/Media - 3D Pipeline >> 3DSTATE_DEPTH_BUFFER >> Surface * Format (p321). */ bool has_stencil = surf->usage & ISL_SURF_USAGE_STENCIL_BIT; assert(surf->usage & ISL_SURF_USAGE_DEPTH_BIT); if (has_stencil) assert(ISL_DEV_GEN(dev) < 7); switch (surf->format) { default: unreachable("bad isl depth format"); case ISL_FORMAT_R32_FLOAT_X8X24_TYPELESS: assert(ISL_DEV_GEN(dev) < 7); return 0; /* D32_FLOAT_S8X24_UINT */ case ISL_FORMAT_R32_FLOAT: assert(!has_stencil); return 1; /* D32_FLOAT */ case ISL_FORMAT_R24_UNORM_X8_TYPELESS: if (has_stencil) { assert(ISL_DEV_GEN(dev) < 7); return 2; /* D24_UNORM_S8_UINT */ } else { assert(ISL_DEV_GEN(dev) >= 5); return 3; /* D24_UNORM_X8_UINT */ } case ISL_FORMAT_R16_UNORM: assert(!has_stencil); return 5; /* D16_UNORM */ } }