/* * Copyright © 2014 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. * * This code is based on original work by Ilia Mirkin. */ /** * \file gen6_gs_visitor.cpp * * Gen6 geometry shader implementation */ #include "gen6_gs_visitor.h" #include "brw_eu.h" namespace brw { void gen6_gs_visitor::emit_prolog() { vec4_gs_visitor::emit_prolog(); /* Gen6 geometry shaders require to allocate an initial VUE handle via * FF_SYNC message, however the documentation remarks that only one thread * can write to the URB simultaneously and the FF_SYNC message provides the * synchronization mechanism for this, so using this message effectively * stalls the thread until it is its turn to write to the URB. Because of * this, the best way to implement geometry shader algorithms in gen6 is to * execute the algorithm before the FF_SYNC message to maximize parallelism. * * To achieve this we buffer the geometry shader outputs for each emitted * vertex in vertex_output during operation. Then, when we have processed * the last vertex (that is, at thread end time), we send the FF_SYNC * message to allocate the initial VUE handle and write all buffered vertex * data to the URB in one go. * * For each emitted vertex, vertex_output will hold vue_map.num_slots * data items plus one additional item to hold required flags * (PrimType, PrimStart, PrimEnd, as expected by the URB_WRITE message) * which come right after the data items for that vertex. Vertex data and * flags for the next vertex come right after the data items and flags for * the previous vertex. */ this->current_annotation = "gen6 prolog"; this->vertex_output = src_reg(this, glsl_type::uint_type, (prog_data->vue_map.num_slots + 1) * nir->info.gs.vertices_out); this->vertex_output_offset = src_reg(this, glsl_type::uint_type); emit(MOV(dst_reg(this->vertex_output_offset), brw_imm_ud(0u))); /* MRF 1 will be the header for all messages (FF_SYNC and URB_WRITES), * so initialize it once to R0. */ vec4_instruction *inst = emit(MOV(dst_reg(MRF, 1), retype(brw_vec8_grf(0, 0), BRW_REGISTER_TYPE_UD))); inst->force_writemask_all = true; /* This will be used as a temporary to store writeback data of FF_SYNC * and URB_WRITE messages. */ this->temp = src_reg(this, glsl_type::uint_type); /* This will be used to know when we are processing the first vertex of * a primitive. We will set this to URB_WRITE_PRIM_START only when we know * that we are processing the first vertex in the primitive and to zero * otherwise. This way we can use its value directly in the URB write * headers. */ this->first_vertex = src_reg(this, glsl_type::uint_type); emit(MOV(dst_reg(this->first_vertex), brw_imm_ud(URB_WRITE_PRIM_START))); /* The FF_SYNC message requires to know the number of primitives generated, * so keep a counter for this. */ this->prim_count = src_reg(this, glsl_type::uint_type); emit(MOV(dst_reg(this->prim_count), brw_imm_ud(0u))); if (prog->info.has_transform_feedback_varyings) { /* Create a virtual register to hold destination indices in SOL */ this->destination_indices = src_reg(this, glsl_type::uvec4_type); /* Create a virtual register to hold number of written primitives */ this->sol_prim_written = src_reg(this, glsl_type::uint_type); /* Create a virtual register to hold Streamed Vertex Buffer Indices */ this->svbi = src_reg(this, glsl_type::uvec4_type); /* Create a virtual register to hold max values of SVBI */ this->max_svbi = src_reg(this, glsl_type::uvec4_type); emit(MOV(dst_reg(this->max_svbi), src_reg(retype(brw_vec1_grf(1, 4), BRW_REGISTER_TYPE_UD)))); xfb_setup(); } /* PrimitveID is delivered in r0.1 of the thread payload. If the program * needs it we have to move it to a separate register where we can map * the atttribute. * * Notice that we cannot use a virtual register for this, because we need to * map all input attributes to hardware registers in setup_payload(), * which happens before virtual registers are mapped to hardware registers. * We could work around that issue if we were able to compute the first * non-payload register here and move the PrimitiveID information to that * register, but we can't because at this point we don't know the final * number uniforms that will be included in the payload. * * So, what we do is to place PrimitiveID information in r1, which is always * delivered as part of the payload, but its only populated with data * relevant for transform feedback when we set GEN6_GS_SVBI_PAYLOAD_ENABLE * in the 3DSTATE_GS state packet. That information can be obtained by other * means though, so we can safely use r1 for this purpose. */ if (gs_prog_data->include_primitive_id) { this->primitive_id = src_reg(retype(brw_vec8_grf(1, 0), BRW_REGISTER_TYPE_UD)); emit(GS_OPCODE_SET_PRIMITIVE_ID, dst_reg(this->primitive_id)); } } void gen6_gs_visitor::gs_emit_vertex(int stream_id) { this->current_annotation = "gen6 emit vertex"; /* Buffer all output slots for this vertex in vertex_output */ for (int slot = 0; slot < prog_data->vue_map.num_slots; ++slot) { int varying = prog_data->vue_map.slot_to_varying[slot]; if (varying != VARYING_SLOT_PSIZ) { dst_reg dst(this->vertex_output); dst.reladdr = ralloc(mem_ctx, src_reg); memcpy(dst.reladdr, &this->vertex_output_offset, sizeof(src_reg)); emit_urb_slot(dst, varying); } else { /* The PSIZ slot can pack multiple varyings in different channels * and emit_urb_slot() will produce a MOV instruction for each of * them. Since we are writing to an array, that will translate to * possibly multiple MOV instructions with an array destination and * each will generate a scratch write with the same offset into * scratch space (thus, each one overwriting the previous). This is * not what we want. What we will do instead is emit PSIZ to a * a regular temporary register, then move that resgister into the * array. This way we only have one instruction with an array * destination and we only produce a single scratch write. */ dst_reg tmp = dst_reg(src_reg(this, glsl_type::uvec4_type)); emit_urb_slot(tmp, varying); dst_reg dst(this->vertex_output); dst.reladdr = ralloc(mem_ctx, src_reg); memcpy(dst.reladdr, &this->vertex_output_offset, sizeof(src_reg)); vec4_instruction *inst = emit(MOV(dst, src_reg(tmp))); inst->force_writemask_all = true; } emit(ADD(dst_reg(this->vertex_output_offset), this->vertex_output_offset, brw_imm_ud(1u))); } /* Now buffer flags for this vertex */ dst_reg dst(this->vertex_output); dst.reladdr = ralloc(mem_ctx, src_reg); memcpy(dst.reladdr, &this->vertex_output_offset, sizeof(src_reg)); if (nir->info.gs.output_primitive == GL_POINTS) { /* If we are outputting points, then every vertex has PrimStart and * PrimEnd set. */ emit(MOV(dst, brw_imm_d((_3DPRIM_POINTLIST << URB_WRITE_PRIM_TYPE_SHIFT) | URB_WRITE_PRIM_START | URB_WRITE_PRIM_END))); emit(ADD(dst_reg(this->prim_count), this->prim_count, brw_imm_ud(1u))); } else { /* Otherwise, we can only set the PrimStart flag, which we have stored * in the first_vertex register. We will have to wait until we execute * EndPrimitive() or we end the thread to set the PrimEnd flag on a * vertex. */ emit(OR(dst, this->first_vertex, brw_imm_ud(gs_prog_data->output_topology << URB_WRITE_PRIM_TYPE_SHIFT))); emit(MOV(dst_reg(this->first_vertex), brw_imm_ud(0u))); } emit(ADD(dst_reg(this->vertex_output_offset), this->vertex_output_offset, brw_imm_ud(1u))); } void gen6_gs_visitor::gs_end_primitive() { this->current_annotation = "gen6 end primitive"; /* Calling EndPrimitive() is optional for point output. In this case we set * the PrimEnd flag when we process EmitVertex(). */ if (nir->info.gs.output_primitive == GL_POINTS) return; /* Otherwise we know that the last vertex we have processed was the last * vertex in the primitive and we need to set its PrimEnd flag, so do this * unless we haven't emitted that vertex at all (vertex_count != 0). * * Notice that we have already incremented vertex_count when we processed * the last emit_vertex, so we need to take that into account in the * comparison below (hence the num_output_vertices + 1 in the comparison * below). */ unsigned num_output_vertices = nir->info.gs.vertices_out; emit(CMP(dst_null_ud(), this->vertex_count, brw_imm_ud(num_output_vertices + 1), BRW_CONDITIONAL_L)); vec4_instruction *inst = emit(CMP(dst_null_ud(), this->vertex_count, brw_imm_ud(0u), BRW_CONDITIONAL_NEQ)); inst->predicate = BRW_PREDICATE_NORMAL; emit(IF(BRW_PREDICATE_NORMAL)); { /* vertex_output_offset is already pointing at the first entry of the * next vertex. So subtract 1 to modify the flags for the previous * vertex. */ src_reg offset(this, glsl_type::uint_type); emit(ADD(dst_reg(offset), this->vertex_output_offset, brw_imm_d(-1))); src_reg dst(this->vertex_output); dst.reladdr = ralloc(mem_ctx, src_reg); memcpy(dst.reladdr, &offset, sizeof(src_reg)); emit(OR(dst_reg(dst), dst, brw_imm_d(URB_WRITE_PRIM_END))); emit(ADD(dst_reg(this->prim_count), this->prim_count, brw_imm_ud(1u))); /* Set the first vertex flag to indicate that the next vertex will start * a primitive. */ emit(MOV(dst_reg(this->first_vertex), brw_imm_d(URB_WRITE_PRIM_START))); } emit(BRW_OPCODE_ENDIF); } void gen6_gs_visitor::emit_urb_write_header(int mrf) { this->current_annotation = "gen6 urb header"; /* Compute offset of the flags for the current vertex in vertex_output and * write them in dw2 of the message header. * * Notice that by the time that emit_thread_end() calls here * vertex_output_offset should point to the first data item of the current * vertex in vertex_output, thus we only need to add the number of output * slots per vertex to that offset to obtain the flags data offset. */ src_reg flags_offset(this, glsl_type::uint_type); emit(ADD(dst_reg(flags_offset), this->vertex_output_offset, brw_imm_d(prog_data->vue_map.num_slots))); src_reg flags_data(this->vertex_output); flags_data.reladdr = ralloc(mem_ctx, src_reg); memcpy(flags_data.reladdr, &flags_offset, sizeof(src_reg)); emit(GS_OPCODE_SET_DWORD_2, dst_reg(MRF, mrf), flags_data); } static int align_interleaved_urb_mlen(int mlen) { /* URB data written (does not include the message header reg) must * be a multiple of 256 bits, or 2 VS registers. See vol5c.5, * section 5.4.3.2.2: URB_INTERLEAVED. */ if ((mlen % 2) != 1) mlen++; return mlen; } void gen6_gs_visitor::emit_urb_write_opcode(bool complete, int base_mrf, int last_mrf, int urb_offset) { vec4_instruction *inst = NULL; if (!complete) { /* If the vertex is not complete we don't have to do anything special */ inst = emit(GS_OPCODE_URB_WRITE); inst->urb_write_flags = BRW_URB_WRITE_NO_FLAGS; } else { /* Otherwise we always request to allocate a new VUE handle. If this is * the last write before the EOT message and the new handle never gets * used it will be dereferenced when we send the EOT message. This is * necessary to avoid different setups for the EOT message (one for the * case when there is no output and another for the case when there is) * which would require to end the program with an IF/ELSE/ENDIF block, * something we do not want. */ inst = emit(GS_OPCODE_URB_WRITE_ALLOCATE); inst->urb_write_flags = BRW_URB_WRITE_COMPLETE; inst->dst = dst_reg(MRF, base_mrf); inst->src[0] = this->temp; } inst->base_mrf = base_mrf; inst->mlen = align_interleaved_urb_mlen(last_mrf - base_mrf); inst->offset = urb_offset; } void gen6_gs_visitor::emit_thread_end() { /* Make sure the current primitive is ended: we know it is not ended when * first_vertex is not zero. This is only relevant for outputs other than * points because in the point case we set PrimEnd on all vertices. */ if (nir->info.gs.output_primitive != GL_POINTS) { emit(CMP(dst_null_ud(), this->first_vertex, brw_imm_ud(0u), BRW_CONDITIONAL_Z)); emit(IF(BRW_PREDICATE_NORMAL)); gs_end_primitive(); emit(BRW_OPCODE_ENDIF); } /* Here we have to: * 1) Emit an FF_SYNC messsage to obtain an initial VUE handle. * 2) Loop over all buffered vertex data and write it to corresponding * URB entries. * 3) Allocate new VUE handles for all vertices other than the first. * 4) Send a final EOT message. */ /* MRF 0 is reserved for the debugger, so start with message header * in MRF 1. */ int base_mrf = 1; /* In the process of generating our URB write message contents, we * may need to unspill a register or load from an array. Those * reads would use MRFs 21..23 */ int max_usable_mrf = FIRST_SPILL_MRF(devinfo->gen); /* Issue the FF_SYNC message and obtain the initial VUE handle. */ emit(CMP(dst_null_ud(), this->vertex_count, brw_imm_ud(0u), BRW_CONDITIONAL_G)); emit(IF(BRW_PREDICATE_NORMAL)); { this->current_annotation = "gen6 thread end: ff_sync"; vec4_instruction *inst; if (prog->info.has_transform_feedback_varyings) { src_reg sol_temp(this, glsl_type::uvec4_type); emit(GS_OPCODE_FF_SYNC_SET_PRIMITIVES, dst_reg(this->svbi), this->vertex_count, this->prim_count, sol_temp); inst = emit(GS_OPCODE_FF_SYNC, dst_reg(this->temp), this->prim_count, this->svbi); } else { inst = emit(GS_OPCODE_FF_SYNC, dst_reg(this->temp), this->prim_count, brw_imm_ud(0u)); } inst->base_mrf = base_mrf; /* Loop over all buffered vertices and emit URB write messages */ this->current_annotation = "gen6 thread end: urb writes init"; src_reg vertex(this, glsl_type::uint_type); emit(MOV(dst_reg(vertex), brw_imm_ud(0u))); emit(MOV(dst_reg(this->vertex_output_offset), brw_imm_ud(0u))); this->current_annotation = "gen6 thread end: urb writes"; emit(BRW_OPCODE_DO); { emit(CMP(dst_null_d(), vertex, this->vertex_count, BRW_CONDITIONAL_GE)); inst = emit(BRW_OPCODE_BREAK); inst->predicate = BRW_PREDICATE_NORMAL; /* First we prepare the message header */ emit_urb_write_header(base_mrf); /* Then add vertex data to the message in interleaved fashion */ int slot = 0; bool complete = false; do { int mrf = base_mrf + 1; /* URB offset is in URB row increments, and each of our MRFs is half * of one of those, since we're doing interleaved writes. */ int urb_offset = slot / 2; for (; slot < prog_data->vue_map.num_slots; ++slot) { int varying = prog_data->vue_map.slot_to_varying[slot]; current_annotation = output_reg_annotation[varying]; /* Compute offset of this slot for the current vertex * in vertex_output */ src_reg data(this->vertex_output); data.reladdr = ralloc(mem_ctx, src_reg); memcpy(data.reladdr, &this->vertex_output_offset, sizeof(src_reg)); /* Copy this slot to the appropriate message register */ dst_reg reg = dst_reg(MRF, mrf); reg.type = output_reg[varying][0].type; data.type = reg.type; vec4_instruction *inst = emit(MOV(reg, data)); inst->force_writemask_all = true; mrf++; emit(ADD(dst_reg(this->vertex_output_offset), this->vertex_output_offset, brw_imm_ud(1u))); /* If this was max_usable_mrf, we can't fit anything more into * this URB WRITE. Same if we reached the max. message length. */ if (mrf > max_usable_mrf || align_interleaved_urb_mlen(mrf - base_mrf + 1) > BRW_MAX_MSG_LENGTH) { slot++; break; } } complete = slot >= prog_data->vue_map.num_slots; emit_urb_write_opcode(complete, base_mrf, mrf, urb_offset); } while (!complete); /* Skip over the flags data item so that vertex_output_offset points * to the first data item of the next vertex, so that we can start * writing the next vertex. */ emit(ADD(dst_reg(this->vertex_output_offset), this->vertex_output_offset, brw_imm_ud(1u))); emit(ADD(dst_reg(vertex), vertex, brw_imm_ud(1u))); } emit(BRW_OPCODE_WHILE); if (prog->info.has_transform_feedback_varyings) xfb_write(); } emit(BRW_OPCODE_ENDIF); /* Finally, emit EOT message. * * In gen6 we need to end the thread differently depending on whether we have * emitted at least one vertex or not. In case we did, the EOT message must * always include the COMPLETE flag or else the GPU hangs. If we have not * produced any output we can't use the COMPLETE flag. * * However, this would lead us to end the program with an ENDIF opcode, * which we want to avoid, so what we do is that we always request a new * VUE handle every time we do a URB WRITE, even for the last vertex we emit. * With this we make sure that whether we have emitted at least one vertex * or none at all, we have to finish the thread without writing to the URB, * which works for both cases by setting the COMPLETE and UNUSED flags in * the EOT message. */ this->current_annotation = "gen6 thread end: EOT"; if (prog->info.has_transform_feedback_varyings) { /* When emitting EOT, set SONumPrimsWritten Increment Value. */ src_reg data(this, glsl_type::uint_type); emit(AND(dst_reg(data), this->sol_prim_written, brw_imm_ud(0xffffu))); emit(SHL(dst_reg(data), data, brw_imm_ud(16u))); emit(GS_OPCODE_SET_DWORD_2, dst_reg(MRF, base_mrf), data); } vec4_instruction *inst = emit(GS_OPCODE_THREAD_END); inst->urb_write_flags = BRW_URB_WRITE_COMPLETE | BRW_URB_WRITE_UNUSED; inst->base_mrf = base_mrf; inst->mlen = 1; } void gen6_gs_visitor::setup_payload() { int attribute_map[BRW_VARYING_SLOT_COUNT * MAX_GS_INPUT_VERTICES]; /* Attributes are going to be interleaved, so one register contains two * attribute slots. */ int attributes_per_reg = 2; /* If a geometry shader tries to read from an input that wasn't written by * the vertex shader, that produces undefined results, but it shouldn't * crash anything. So initialize attribute_map to zeros--that ensures that * these undefined results are read from r0. */ memset(attribute_map, 0, sizeof(attribute_map)); int reg = 0; /* The payload always contains important data in r0. */ reg++; /* r1 is always part of the payload and it holds information relevant * for transform feedback when we set the GEN6_GS_SVBI_PAYLOAD_ENABLE bit in * the 3DSTATE_GS packet. We will overwrite it with the PrimitiveID * information (and move the original value to a virtual register if * necessary). */ if (gs_prog_data->include_primitive_id) attribute_map[VARYING_SLOT_PRIMITIVE_ID] = attributes_per_reg * reg; reg++; reg = setup_uniforms(reg); reg = setup_varying_inputs(reg, attributes_per_reg); this->first_non_payload_grf = reg; } void gen6_gs_visitor::xfb_setup() { static const unsigned swizzle_for_offset[4] = { BRW_SWIZZLE4(0, 1, 2, 3), BRW_SWIZZLE4(1, 2, 3, 3), BRW_SWIZZLE4(2, 3, 3, 3), BRW_SWIZZLE4(3, 3, 3, 3) }; const struct gl_transform_feedback_info *linked_xfb_info = this->prog->sh.LinkedTransformFeedback; int i; /* Make sure that the VUE slots won't overflow the unsigned chars in * prog_data->transform_feedback_bindings[]. */ STATIC_ASSERT(BRW_VARYING_SLOT_COUNT <= 256); /* Make sure that we don't need more binding table entries than we've * set aside for use in transform feedback. (We shouldn't, since we * set aside enough binding table entries to have one per component). */ assert(linked_xfb_info->NumOutputs <= BRW_MAX_SOL_BINDINGS); gs_prog_data->num_transform_feedback_bindings = linked_xfb_info->NumOutputs; for (i = 0; i < gs_prog_data->num_transform_feedback_bindings; i++) { gs_prog_data->transform_feedback_bindings[i] = linked_xfb_info->Outputs[i].OutputRegister; gs_prog_data->transform_feedback_swizzles[i] = swizzle_for_offset[linked_xfb_info->Outputs[i].ComponentOffset]; } } void gen6_gs_visitor::xfb_write() { unsigned num_verts; if (!gs_prog_data->num_transform_feedback_bindings) return; switch (gs_prog_data->output_topology) { case _3DPRIM_POINTLIST: num_verts = 1; break; case _3DPRIM_LINELIST: case _3DPRIM_LINESTRIP: case _3DPRIM_LINELOOP: num_verts = 2; break; case _3DPRIM_TRILIST: case _3DPRIM_TRIFAN: case _3DPRIM_TRISTRIP: case _3DPRIM_RECTLIST: num_verts = 3; break; case _3DPRIM_QUADLIST: case _3DPRIM_QUADSTRIP: case _3DPRIM_POLYGON: num_verts = 3; break; default: unreachable("Unexpected primitive type in Gen6 SOL program."); } this->current_annotation = "gen6 thread end: svb writes init"; emit(MOV(dst_reg(this->vertex_output_offset), brw_imm_ud(0u))); emit(MOV(dst_reg(this->sol_prim_written), brw_imm_ud(0u))); /* Check that at least one primitive can be written * * Note: since we use the binding table to keep track of buffer offsets * and stride, the GS doesn't need to keep track of a separate pointer * into each buffer; it uses a single pointer which increments by 1 for * each vertex. So we use SVBI0 for this pointer, regardless of whether * transform feedback is in interleaved or separate attribs mode. */ src_reg sol_temp(this, glsl_type::uvec4_type); emit(ADD(dst_reg(sol_temp), this->svbi, brw_imm_ud(num_verts))); /* Compare SVBI calculated number with the maximum value, which is * in R1.4 (previously saved in this->max_svbi) for gen6. */ emit(CMP(dst_null_d(), sol_temp, this->max_svbi, BRW_CONDITIONAL_LE)); emit(IF(BRW_PREDICATE_NORMAL)); { vec4_instruction *inst = emit(MOV(dst_reg(destination_indices), brw_imm_vf4(brw_float_to_vf(0.0), brw_float_to_vf(1.0), brw_float_to_vf(2.0), brw_float_to_vf(0.0)))); inst->force_writemask_all = true; emit(ADD(dst_reg(this->destination_indices), this->destination_indices, this->svbi)); } emit(BRW_OPCODE_ENDIF); /* Write transform feedback data for all processed vertices. */ for (int i = 0; i < (int)nir->info.gs.vertices_out; i++) { emit(MOV(dst_reg(sol_temp), brw_imm_d(i))); emit(CMP(dst_null_d(), sol_temp, this->vertex_count, BRW_CONDITIONAL_L)); emit(IF(BRW_PREDICATE_NORMAL)); { xfb_program(i, num_verts); } emit(BRW_OPCODE_ENDIF); } } void gen6_gs_visitor::xfb_program(unsigned vertex, unsigned num_verts) { unsigned binding; unsigned num_bindings = gs_prog_data->num_transform_feedback_bindings; src_reg sol_temp(this, glsl_type::uvec4_type); /* Check for buffer overflow: we need room to write the complete primitive * (all vertices). Otherwise, avoid writing any vertices for it */ emit(ADD(dst_reg(sol_temp), this->sol_prim_written, brw_imm_ud(1u))); emit(MUL(dst_reg(sol_temp), sol_temp, brw_imm_ud(num_verts))); emit(ADD(dst_reg(sol_temp), sol_temp, this->svbi)); emit(CMP(dst_null_d(), sol_temp, this->max_svbi, BRW_CONDITIONAL_LE)); emit(IF(BRW_PREDICATE_NORMAL)); { /* Avoid overwriting MRF 1 as it is used as URB write message header */ dst_reg mrf_reg(MRF, 2); this->current_annotation = "gen6: emit SOL vertex data"; /* For each vertex, generate code to output each varying using the * appropriate binding table entry. */ for (binding = 0; binding < num_bindings; ++binding) { unsigned char varying = gs_prog_data->transform_feedback_bindings[binding]; /* Set up the correct destination index for this vertex */ vec4_instruction *inst = emit(GS_OPCODE_SVB_SET_DST_INDEX, mrf_reg, this->destination_indices); inst->sol_vertex = vertex % num_verts; /* From the Sandybridge PRM, Volume 2, Part 1, Section 4.5.1: * * "Prior to End of Thread with a URB_WRITE, the kernel must * ensure that all writes are complete by sending the final * write as a committed write." */ bool final_write = binding == (unsigned) num_bindings - 1 && inst->sol_vertex == num_verts - 1; /* Compute offset of this varying for the current vertex * in vertex_output */ this->current_annotation = output_reg_annotation[varying]; src_reg data(this->vertex_output); data.reladdr = ralloc(mem_ctx, src_reg); int offset = get_vertex_output_offset_for_varying(vertex, varying); emit(MOV(dst_reg(this->vertex_output_offset), brw_imm_d(offset))); memcpy(data.reladdr, &this->vertex_output_offset, sizeof(src_reg)); data.type = output_reg[varying][0].type; /* PSIZ, LAYER and VIEWPORT are packed in different channels of the * same slot, so make sure we write the appropriate channel */ if (varying == VARYING_SLOT_PSIZ) data.swizzle = BRW_SWIZZLE_WWWW; else if (varying == VARYING_SLOT_LAYER) data.swizzle = BRW_SWIZZLE_YYYY; else if (varying == VARYING_SLOT_VIEWPORT) data.swizzle = BRW_SWIZZLE_ZZZZ; else data.swizzle = gs_prog_data->transform_feedback_swizzles[binding]; /* Write data */ inst = emit(GS_OPCODE_SVB_WRITE, mrf_reg, data, sol_temp); inst->sol_binding = binding; inst->sol_final_write = final_write; if (final_write) { /* This is the last vertex of the primitive, then increment * SO num primitive counter and destination indices. */ emit(ADD(dst_reg(this->destination_indices), this->destination_indices, brw_imm_ud(num_verts))); emit(ADD(dst_reg(this->sol_prim_written), this->sol_prim_written, brw_imm_ud(1u))); } } this->current_annotation = NULL; } emit(BRW_OPCODE_ENDIF); } int gen6_gs_visitor::get_vertex_output_offset_for_varying(int vertex, int varying) { /* Find the output slot assigned to this varying. * * VARYING_SLOT_LAYER and VARYING_SLOT_VIEWPORT are packed in the same slot * as VARYING_SLOT_PSIZ. */ if (varying == VARYING_SLOT_LAYER || varying == VARYING_SLOT_VIEWPORT) varying = VARYING_SLOT_PSIZ; int slot = prog_data->vue_map.varying_to_slot[varying]; if (slot < 0) { /* This varying does not exist in the VUE so we are not writing to it * and its value is undefined. We still want to return a valid offset * into vertex_output though, to prevent any out-of-bound accesses into * the vertex_output array. Since the value for this varying is undefined * we don't really care for the value we assign to it, so any offset * within the limits of vertex_output will do. */ slot = 0; } return vertex * (prog_data->vue_map.num_slots + 1) + slot; } } /* namespace brw */