/* * Copyright © 2011 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ #include "brw_vec4.h" #include "brw_fs.h" #include "brw_cfg.h" #include "brw_nir.h" #include "brw_vec4_builder.h" #include "brw_vec4_live_variables.h" #include "brw_vec4_vs.h" #include "brw_dead_control_flow.h" #include "common/gen_debug.h" #include "program/prog_parameter.h" #define MAX_INSTRUCTION (1 << 30) using namespace brw; namespace brw { void src_reg::init() { memset(this, 0, sizeof(*this)); this->file = BAD_FILE; this->type = BRW_REGISTER_TYPE_UD; } src_reg::src_reg(enum brw_reg_file file, int nr, const glsl_type *type) { init(); this->file = file; this->nr = nr; if (type && (type->is_scalar() || type->is_vector() || type->is_matrix())) this->swizzle = brw_swizzle_for_size(type->vector_elements); else this->swizzle = BRW_SWIZZLE_XYZW; if (type) this->type = brw_type_for_base_type(type); } /** Generic unset register constructor. */ src_reg::src_reg() { init(); } src_reg::src_reg(struct ::brw_reg reg) : backend_reg(reg) { this->offset = 0; this->reladdr = NULL; } src_reg::src_reg(const dst_reg ®) : backend_reg(reg) { this->reladdr = reg.reladdr; this->swizzle = brw_swizzle_for_mask(reg.writemask); } void dst_reg::init() { memset(this, 0, sizeof(*this)); this->file = BAD_FILE; this->type = BRW_REGISTER_TYPE_UD; this->writemask = WRITEMASK_XYZW; } dst_reg::dst_reg() { init(); } dst_reg::dst_reg(enum brw_reg_file file, int nr) { init(); this->file = file; this->nr = nr; } dst_reg::dst_reg(enum brw_reg_file file, int nr, const glsl_type *type, unsigned writemask) { init(); this->file = file; this->nr = nr; this->type = brw_type_for_base_type(type); this->writemask = writemask; } dst_reg::dst_reg(enum brw_reg_file file, int nr, brw_reg_type type, unsigned writemask) { init(); this->file = file; this->nr = nr; this->type = type; this->writemask = writemask; } dst_reg::dst_reg(struct ::brw_reg reg) : backend_reg(reg) { this->offset = 0; this->reladdr = NULL; } dst_reg::dst_reg(const src_reg ®) : backend_reg(reg) { this->writemask = brw_mask_for_swizzle(reg.swizzle); this->reladdr = reg.reladdr; } bool dst_reg::equals(const dst_reg &r) const { return (this->backend_reg::equals(r) && (reladdr == r.reladdr || (reladdr && r.reladdr && reladdr->equals(*r.reladdr)))); } bool vec4_instruction::is_send_from_grf() { switch (opcode) { case SHADER_OPCODE_SHADER_TIME_ADD: case VS_OPCODE_PULL_CONSTANT_LOAD_GEN7: case SHADER_OPCODE_UNTYPED_ATOMIC: case SHADER_OPCODE_UNTYPED_SURFACE_READ: case SHADER_OPCODE_UNTYPED_SURFACE_WRITE: case SHADER_OPCODE_TYPED_ATOMIC: case SHADER_OPCODE_TYPED_SURFACE_READ: case SHADER_OPCODE_TYPED_SURFACE_WRITE: case VEC4_OPCODE_URB_READ: case TCS_OPCODE_URB_WRITE: case TCS_OPCODE_RELEASE_INPUT: case SHADER_OPCODE_BARRIER: return true; default: return false; } } /** * Returns true if this instruction's sources and destinations cannot * safely be the same register. * * In most cases, a register can be written over safely by the same * instruction that is its last use. For a single instruction, the * sources are dereferenced before writing of the destination starts * (naturally). * * However, there are a few cases where this can be problematic: * * - Virtual opcodes that translate to multiple instructions in the * code generator: if src == dst and one instruction writes the * destination before a later instruction reads the source, then * src will have been clobbered. * * The register allocator uses this information to set up conflicts between * GRF sources and the destination. */ bool vec4_instruction::has_source_and_destination_hazard() const { switch (opcode) { case TCS_OPCODE_SET_INPUT_URB_OFFSETS: case TCS_OPCODE_SET_OUTPUT_URB_OFFSETS: case TES_OPCODE_ADD_INDIRECT_URB_OFFSET: return true; default: /* 8-wide compressed DF operations are executed as two 4-wide operations, * so we have a src/dst hazard if the first half of the instruction * overwrites the source of the second half. Prevent this by marking * compressed instructions as having src/dst hazards, so the register * allocator assigns safe register regions for dst and srcs. */ return size_written > REG_SIZE; } } unsigned vec4_instruction::size_read(unsigned arg) const { switch (opcode) { case SHADER_OPCODE_SHADER_TIME_ADD: case SHADER_OPCODE_UNTYPED_ATOMIC: case SHADER_OPCODE_UNTYPED_SURFACE_READ: case SHADER_OPCODE_UNTYPED_SURFACE_WRITE: case SHADER_OPCODE_TYPED_ATOMIC: case SHADER_OPCODE_TYPED_SURFACE_READ: case SHADER_OPCODE_TYPED_SURFACE_WRITE: case TCS_OPCODE_URB_WRITE: if (arg == 0) return mlen * REG_SIZE; break; case VS_OPCODE_PULL_CONSTANT_LOAD_GEN7: if (arg == 1) return mlen * REG_SIZE; break; default: break; } switch (src[arg].file) { case BAD_FILE: return 0; case IMM: case UNIFORM: return 4 * type_sz(src[arg].type); default: /* XXX - Represent actual vertical stride. */ return exec_size * type_sz(src[arg].type); } } bool vec4_instruction::can_do_source_mods(const struct gen_device_info *devinfo) { if (devinfo->gen == 6 && is_math()) return false; if (is_send_from_grf()) return false; if (!backend_instruction::can_do_source_mods()) return false; return true; } bool vec4_instruction::can_do_writemask(const struct gen_device_info *devinfo) { switch (opcode) { case SHADER_OPCODE_GEN4_SCRATCH_READ: case VEC4_OPCODE_DOUBLE_TO_F32: case VEC4_OPCODE_DOUBLE_TO_D32: case VEC4_OPCODE_DOUBLE_TO_U32: case VEC4_OPCODE_TO_DOUBLE: case VEC4_OPCODE_PICK_LOW_32BIT: case VEC4_OPCODE_PICK_HIGH_32BIT: case VEC4_OPCODE_SET_LOW_32BIT: case VEC4_OPCODE_SET_HIGH_32BIT: case VS_OPCODE_PULL_CONSTANT_LOAD: case VS_OPCODE_PULL_CONSTANT_LOAD_GEN7: case VS_OPCODE_SET_SIMD4X2_HEADER_GEN9: case TCS_OPCODE_SET_INPUT_URB_OFFSETS: case TCS_OPCODE_SET_OUTPUT_URB_OFFSETS: case TES_OPCODE_CREATE_INPUT_READ_HEADER: case TES_OPCODE_ADD_INDIRECT_URB_OFFSET: case VEC4_OPCODE_URB_READ: case SHADER_OPCODE_MOV_INDIRECT: return false; default: /* The MATH instruction on Gen6 only executes in align1 mode, which does * not support writemasking. */ if (devinfo->gen == 6 && is_math()) return false; if (is_tex()) return false; return true; } } bool vec4_instruction::can_change_types() const { return dst.type == src[0].type && !src[0].abs && !src[0].negate && !saturate && (opcode == BRW_OPCODE_MOV || (opcode == BRW_OPCODE_SEL && dst.type == src[1].type && predicate != BRW_PREDICATE_NONE && !src[1].abs && !src[1].negate)); } /** * Returns how many MRFs an opcode will write over. * * Note that this is not the 0 or 1 implied writes in an actual gen * instruction -- the generate_* functions generate additional MOVs * for setup. */ int vec4_visitor::implied_mrf_writes(vec4_instruction *inst) { if (inst->mlen == 0 || inst->is_send_from_grf()) return 0; switch (inst->opcode) { case SHADER_OPCODE_RCP: case SHADER_OPCODE_RSQ: case SHADER_OPCODE_SQRT: case SHADER_OPCODE_EXP2: case SHADER_OPCODE_LOG2: case SHADER_OPCODE_SIN: case SHADER_OPCODE_COS: return 1; case SHADER_OPCODE_INT_QUOTIENT: case SHADER_OPCODE_INT_REMAINDER: case SHADER_OPCODE_POW: case TCS_OPCODE_THREAD_END: return 2; case VS_OPCODE_URB_WRITE: return 1; case VS_OPCODE_PULL_CONSTANT_LOAD: return 2; case SHADER_OPCODE_GEN4_SCRATCH_READ: return 2; case SHADER_OPCODE_GEN4_SCRATCH_WRITE: return 3; case GS_OPCODE_URB_WRITE: case GS_OPCODE_URB_WRITE_ALLOCATE: case GS_OPCODE_THREAD_END: return 0; case GS_OPCODE_FF_SYNC: return 1; case TCS_OPCODE_URB_WRITE: return 0; case SHADER_OPCODE_SHADER_TIME_ADD: return 0; case SHADER_OPCODE_TEX: case SHADER_OPCODE_TXL: case SHADER_OPCODE_TXD: case SHADER_OPCODE_TXF: case SHADER_OPCODE_TXF_CMS: case SHADER_OPCODE_TXF_CMS_W: case SHADER_OPCODE_TXF_MCS: case SHADER_OPCODE_TXS: case SHADER_OPCODE_TG4: case SHADER_OPCODE_TG4_OFFSET: case SHADER_OPCODE_SAMPLEINFO: case SHADER_OPCODE_GET_BUFFER_SIZE: return inst->header_size; default: unreachable("not reached"); } } bool src_reg::equals(const src_reg &r) const { return (this->backend_reg::equals(r) && !reladdr && !r.reladdr); } bool src_reg::negative_equals(const src_reg &r) const { return this->backend_reg::negative_equals(r) && !reladdr && !r.reladdr; } bool vec4_visitor::opt_vector_float() { bool progress = false; foreach_block(block, cfg) { int last_reg = -1, last_offset = -1; enum brw_reg_file last_reg_file = BAD_FILE; uint8_t imm[4] = { 0 }; int inst_count = 0; vec4_instruction *imm_inst[4]; unsigned writemask = 0; enum brw_reg_type dest_type = BRW_REGISTER_TYPE_F; foreach_inst_in_block_safe(vec4_instruction, inst, block) { int vf = -1; enum brw_reg_type need_type; /* Look for unconditional MOVs from an immediate with a partial * writemask. Skip type-conversion MOVs other than integer 0, * where the type doesn't matter. See if the immediate can be * represented as a VF. */ if (inst->opcode == BRW_OPCODE_MOV && inst->src[0].file == IMM && inst->predicate == BRW_PREDICATE_NONE && inst->dst.writemask != WRITEMASK_XYZW && type_sz(inst->src[0].type) < 8 && (inst->src[0].type == inst->dst.type || inst->src[0].d == 0)) { vf = brw_float_to_vf(inst->src[0].d); need_type = BRW_REGISTER_TYPE_D; if (vf == -1) { vf = brw_float_to_vf(inst->src[0].f); need_type = BRW_REGISTER_TYPE_F; } } else { last_reg = -1; } /* If this wasn't a MOV, or the destination register doesn't match, * or we have to switch destination types, then this breaks our * sequence. Combine anything we've accumulated so far. */ if (last_reg != inst->dst.nr || last_offset != inst->dst.offset || last_reg_file != inst->dst.file || (vf > 0 && dest_type != need_type)) { if (inst_count > 1) { unsigned vf; memcpy(&vf, imm, sizeof(vf)); vec4_instruction *mov = MOV(imm_inst[0]->dst, brw_imm_vf(vf)); mov->dst.type = dest_type; mov->dst.writemask = writemask; inst->insert_before(block, mov); for (int i = 0; i < inst_count; i++) { imm_inst[i]->remove(block); } progress = true; } inst_count = 0; last_reg = -1; writemask = 0; dest_type = BRW_REGISTER_TYPE_F; for (int i = 0; i < 4; i++) { imm[i] = 0; } } /* Record this instruction's value (if it was representable). */ if (vf != -1) { if ((inst->dst.writemask & WRITEMASK_X) != 0) imm[0] = vf; if ((inst->dst.writemask & WRITEMASK_Y) != 0) imm[1] = vf; if ((inst->dst.writemask & WRITEMASK_Z) != 0) imm[2] = vf; if ((inst->dst.writemask & WRITEMASK_W) != 0) imm[3] = vf; writemask |= inst->dst.writemask; imm_inst[inst_count++] = inst; last_reg = inst->dst.nr; last_offset = inst->dst.offset; last_reg_file = inst->dst.file; if (vf > 0) dest_type = need_type; } } } if (progress) invalidate_live_intervals(); return progress; } /* Replaces unused channels of a swizzle with channels that are used. * * For instance, this pass transforms * * mov vgrf4.yz, vgrf5.wxzy * * into * * mov vgrf4.yz, vgrf5.xxzx * * This eliminates false uses of some channels, letting dead code elimination * remove the instructions that wrote them. */ bool vec4_visitor::opt_reduce_swizzle() { bool progress = false; foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) { if (inst->dst.file == BAD_FILE || inst->dst.file == ARF || inst->dst.file == FIXED_GRF || inst->is_send_from_grf()) continue; unsigned swizzle; /* Determine which channels of the sources are read. */ switch (inst->opcode) { case VEC4_OPCODE_PACK_BYTES: case BRW_OPCODE_DP4: case BRW_OPCODE_DPH: /* FINISHME: DPH reads only three channels of src0, * but all four of src1. */ swizzle = brw_swizzle_for_size(4); break; case BRW_OPCODE_DP3: swizzle = brw_swizzle_for_size(3); break; case BRW_OPCODE_DP2: swizzle = brw_swizzle_for_size(2); break; case VEC4_OPCODE_TO_DOUBLE: case VEC4_OPCODE_DOUBLE_TO_F32: case VEC4_OPCODE_DOUBLE_TO_D32: case VEC4_OPCODE_DOUBLE_TO_U32: case VEC4_OPCODE_PICK_LOW_32BIT: case VEC4_OPCODE_PICK_HIGH_32BIT: case VEC4_OPCODE_SET_LOW_32BIT: case VEC4_OPCODE_SET_HIGH_32BIT: swizzle = brw_swizzle_for_size(4); break; default: swizzle = brw_swizzle_for_mask(inst->dst.writemask); break; } /* Update sources' swizzles. */ for (int i = 0; i < 3; i++) { if (inst->src[i].file != VGRF && inst->src[i].file != ATTR && inst->src[i].file != UNIFORM) continue; const unsigned new_swizzle = brw_compose_swizzle(swizzle, inst->src[i].swizzle); if (inst->src[i].swizzle != new_swizzle) { inst->src[i].swizzle = new_swizzle; progress = true; } } } if (progress) invalidate_live_intervals(); return progress; } void vec4_visitor::split_uniform_registers() { /* Prior to this, uniforms have been in an array sized according to * the number of vector uniforms present, sparsely filled (so an * aggregate results in reg indices being skipped over). Now we're * going to cut those aggregates up so each .nr index is one * vector. The goal is to make elimination of unused uniform * components easier later. */ foreach_block_and_inst(block, vec4_instruction, inst, cfg) { for (int i = 0 ; i < 3; i++) { if (inst->src[i].file != UNIFORM) continue; assert(!inst->src[i].reladdr); inst->src[i].nr += inst->src[i].offset / 16; inst->src[i].offset %= 16; } } } /* This function returns the register number where we placed the uniform */ static int set_push_constant_loc(const int nr_uniforms, int *new_uniform_count, const int src, const int size, const int channel_size, int *new_loc, int *new_chan, int *new_chans_used) { int dst; /* Find the lowest place we can slot this uniform in. */ for (dst = 0; dst < nr_uniforms; dst++) { if (ALIGN(new_chans_used[dst], channel_size) + size <= 4) break; } assert(dst < nr_uniforms); new_loc[src] = dst; new_chan[src] = ALIGN(new_chans_used[dst], channel_size); new_chans_used[dst] = ALIGN(new_chans_used[dst], channel_size) + size; *new_uniform_count = MAX2(*new_uniform_count, dst + 1); return dst; } void vec4_visitor::pack_uniform_registers() { uint8_t chans_used[this->uniforms]; int new_loc[this->uniforms]; int new_chan[this->uniforms]; bool is_aligned_to_dvec4[this->uniforms]; int new_chans_used[this->uniforms]; int channel_sizes[this->uniforms]; memset(chans_used, 0, sizeof(chans_used)); memset(new_loc, 0, sizeof(new_loc)); memset(new_chan, 0, sizeof(new_chan)); memset(new_chans_used, 0, sizeof(new_chans_used)); memset(is_aligned_to_dvec4, 0, sizeof(is_aligned_to_dvec4)); memset(channel_sizes, 0, sizeof(channel_sizes)); /* Find which uniform vectors are actually used by the program. We * expect unused vector elements when we've moved array access out * to pull constants, and from some GLSL code generators like wine. */ foreach_block_and_inst(block, vec4_instruction, inst, cfg) { unsigned readmask; switch (inst->opcode) { case VEC4_OPCODE_PACK_BYTES: case BRW_OPCODE_DP4: case BRW_OPCODE_DPH: readmask = 0xf; break; case BRW_OPCODE_DP3: readmask = 0x7; break; case BRW_OPCODE_DP2: readmask = 0x3; break; default: readmask = inst->dst.writemask; break; } for (int i = 0 ; i < 3; i++) { if (inst->src[i].file != UNIFORM) continue; assert(type_sz(inst->src[i].type) % 4 == 0); int channel_size = type_sz(inst->src[i].type) / 4; int reg = inst->src[i].nr; for (int c = 0; c < 4; c++) { if (!(readmask & (1 << c))) continue; unsigned channel = BRW_GET_SWZ(inst->src[i].swizzle, c) + 1; unsigned used = MAX2(chans_used[reg], channel * channel_size); if (used <= 4) { chans_used[reg] = used; channel_sizes[reg] = MAX2(channel_sizes[reg], channel_size); } else { is_aligned_to_dvec4[reg] = true; is_aligned_to_dvec4[reg + 1] = true; chans_used[reg + 1] = used - 4; channel_sizes[reg + 1] = MAX2(channel_sizes[reg + 1], channel_size); } } } if (inst->opcode == SHADER_OPCODE_MOV_INDIRECT && inst->src[0].file == UNIFORM) { assert(inst->src[2].file == BRW_IMMEDIATE_VALUE); assert(inst->src[0].subnr == 0); unsigned bytes_read = inst->src[2].ud; assert(bytes_read % 4 == 0); unsigned vec4s_read = DIV_ROUND_UP(bytes_read, 16); /* We just mark every register touched by a MOV_INDIRECT as being * fully used. This ensures that it doesn't broken up piecewise by * the next part of our packing algorithm. */ int reg = inst->src[0].nr; int channel_size = type_sz(inst->src[0].type) / 4; for (unsigned i = 0; i < vec4s_read; i++) { chans_used[reg + i] = 4; channel_sizes[reg + i] = MAX2(channel_sizes[reg + i], channel_size); } } } int new_uniform_count = 0; /* As the uniforms are going to be reordered, take the data from a temporary * copy of the original param[]. */ uint32_t *param = ralloc_array(NULL, uint32_t, stage_prog_data->nr_params); memcpy(param, stage_prog_data->param, sizeof(uint32_t) * stage_prog_data->nr_params); /* Now, figure out a packing of the live uniform vectors into our * push constants. Start with dvec{3,4} because they are aligned to * dvec4 size (2 vec4). */ for (int src = 0; src < uniforms; src++) { int size = chans_used[src]; if (size == 0 || !is_aligned_to_dvec4[src]) continue; /* dvec3 are aligned to dvec4 size, apply the alignment of the size * to 4 to avoid moving last component of a dvec3 to the available * location at the end of a previous dvec3. These available locations * could be filled by smaller variables in next loop. */ size = ALIGN(size, 4); int dst = set_push_constant_loc(uniforms, &new_uniform_count, src, size, channel_sizes[src], new_loc, new_chan, new_chans_used); /* Move the references to the data */ for (int j = 0; j < size; j++) { stage_prog_data->param[dst * 4 + new_chan[src] + j] = param[src * 4 + j]; } } /* Continue with the rest of data, which is aligned to vec4. */ for (int src = 0; src < uniforms; src++) { int size = chans_used[src]; if (size == 0 || is_aligned_to_dvec4[src]) continue; int dst = set_push_constant_loc(uniforms, &new_uniform_count, src, size, channel_sizes[src], new_loc, new_chan, new_chans_used); /* Move the references to the data */ for (int j = 0; j < size; j++) { stage_prog_data->param[dst * 4 + new_chan[src] + j] = param[src * 4 + j]; } } ralloc_free(param); this->uniforms = new_uniform_count; /* Now, update the instructions for our repacked uniforms. */ foreach_block_and_inst(block, vec4_instruction, inst, cfg) { for (int i = 0 ; i < 3; i++) { int src = inst->src[i].nr; if (inst->src[i].file != UNIFORM) continue; int chan = new_chan[src] / channel_sizes[src]; inst->src[i].nr = new_loc[src]; inst->src[i].swizzle += BRW_SWIZZLE4(chan, chan, chan, chan); } } } /** * Does algebraic optimizations (0 * a = 0, 1 * a = a, a + 0 = a). * * While GLSL IR also performs this optimization, we end up with it in * our instruction stream for a couple of reasons. One is that we * sometimes generate silly instructions, for example in array access * where we'll generate "ADD offset, index, base" even if base is 0. * The other is that GLSL IR's constant propagation doesn't track the * components of aggregates, so some VS patterns (initialize matrix to * 0, accumulate in vertex blending factors) end up breaking down to * instructions involving 0. */ bool vec4_visitor::opt_algebraic() { bool progress = false; foreach_block_and_inst(block, vec4_instruction, inst, cfg) { switch (inst->opcode) { case BRW_OPCODE_MOV: if (inst->src[0].file != IMM) break; if (inst->saturate) { if (inst->dst.type != inst->src[0].type) assert(!"unimplemented: saturate mixed types"); if (brw_saturate_immediate(inst->dst.type, &inst->src[0].as_brw_reg())) { inst->saturate = false; progress = true; } } break; case VEC4_OPCODE_UNPACK_UNIFORM: if (inst->src[0].file != UNIFORM) { inst->opcode = BRW_OPCODE_MOV; progress = true; } break; case BRW_OPCODE_ADD: if (inst->src[1].is_zero()) { inst->opcode = BRW_OPCODE_MOV; inst->src[1] = src_reg(); progress = true; } break; case BRW_OPCODE_MUL: if (inst->src[1].is_zero()) { inst->opcode = BRW_OPCODE_MOV; switch (inst->src[0].type) { case BRW_REGISTER_TYPE_F: inst->src[0] = brw_imm_f(0.0f); break; case BRW_REGISTER_TYPE_D: inst->src[0] = brw_imm_d(0); break; case BRW_REGISTER_TYPE_UD: inst->src[0] = brw_imm_ud(0u); break; default: unreachable("not reached"); } inst->src[1] = src_reg(); progress = true; } else if (inst->src[1].is_one()) { inst->opcode = BRW_OPCODE_MOV; inst->src[1] = src_reg(); progress = true; } else if (inst->src[1].is_negative_one()) { inst->opcode = BRW_OPCODE_MOV; inst->src[0].negate = !inst->src[0].negate; inst->src[1] = src_reg(); progress = true; } break; case BRW_OPCODE_CMP: if (inst->conditional_mod == BRW_CONDITIONAL_GE && inst->src[0].abs && inst->src[0].negate && inst->src[1].is_zero()) { inst->src[0].abs = false; inst->src[0].negate = false; inst->conditional_mod = BRW_CONDITIONAL_Z; progress = true; break; } break; case SHADER_OPCODE_BROADCAST: if (is_uniform(inst->src[0]) || inst->src[1].is_zero()) { inst->opcode = BRW_OPCODE_MOV; inst->src[1] = src_reg(); inst->force_writemask_all = true; progress = true; } break; default: break; } } if (progress) invalidate_live_intervals(); return progress; } /** * Only a limited number of hardware registers may be used for push * constants, so this turns access to the overflowed constants into * pull constants. */ void vec4_visitor::move_push_constants_to_pull_constants() { int pull_constant_loc[this->uniforms]; /* Only allow 32 registers (256 uniform components) as push constants, * which is the limit on gen6. * * If changing this value, note the limitation about total_regs in * brw_curbe.c. */ int max_uniform_components = 32 * 8; if (this->uniforms * 4 <= max_uniform_components) return; /* Make some sort of choice as to which uniforms get sent to pull * constants. We could potentially do something clever here like * look for the most infrequently used uniform vec4s, but leave * that for later. */ for (int i = 0; i < this->uniforms * 4; i += 4) { pull_constant_loc[i / 4] = -1; if (i >= max_uniform_components) { uint32_t *values = &stage_prog_data->param[i]; /* Try to find an existing copy of this uniform in the pull * constants if it was part of an array access already. */ for (unsigned int j = 0; j < stage_prog_data->nr_pull_params; j += 4) { int matches; for (matches = 0; matches < 4; matches++) { if (stage_prog_data->pull_param[j + matches] != values[matches]) break; } if (matches == 4) { pull_constant_loc[i / 4] = j / 4; break; } } if (pull_constant_loc[i / 4] == -1) { assert(stage_prog_data->nr_pull_params % 4 == 0); pull_constant_loc[i / 4] = stage_prog_data->nr_pull_params / 4; for (int j = 0; j < 4; j++) { stage_prog_data->pull_param[stage_prog_data->nr_pull_params++] = values[j]; } } } } /* Now actually rewrite usage of the things we've moved to pull * constants. */ foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) { for (int i = 0 ; i < 3; i++) { if (inst->src[i].file != UNIFORM || pull_constant_loc[inst->src[i].nr] == -1) continue; int uniform = inst->src[i].nr; const glsl_type *temp_type = type_sz(inst->src[i].type) == 8 ? glsl_type::dvec4_type : glsl_type::vec4_type; dst_reg temp = dst_reg(this, temp_type); emit_pull_constant_load(block, inst, temp, inst->src[i], pull_constant_loc[uniform], src_reg()); inst->src[i].file = temp.file; inst->src[i].nr = temp.nr; inst->src[i].offset %= 16; inst->src[i].reladdr = NULL; } } /* Repack push constants to remove the now-unused ones. */ pack_uniform_registers(); } /* Conditions for which we want to avoid setting the dependency control bits */ bool vec4_visitor::is_dep_ctrl_unsafe(const vec4_instruction *inst) { #define IS_DWORD(reg) \ (reg.type == BRW_REGISTER_TYPE_UD || \ reg.type == BRW_REGISTER_TYPE_D) #define IS_64BIT(reg) (reg.file != BAD_FILE && type_sz(reg.type) == 8) /* From the Cherryview and Broadwell PRMs: * * "When source or destination datatype is 64b or operation is integer DWord * multiply, DepCtrl must not be used." * * SKL PRMs don't include this restriction, however, gen7 seems to be * affected, at least by the 64b restriction, since DepCtrl with double * precision instructions seems to produce GPU hangs in some cases. */ if (devinfo->gen == 8 || gen_device_info_is_9lp(devinfo)) { if (inst->opcode == BRW_OPCODE_MUL && IS_DWORD(inst->src[0]) && IS_DWORD(inst->src[1])) return true; } if (devinfo->gen >= 7 && devinfo->gen <= 8) { if (IS_64BIT(inst->dst) || IS_64BIT(inst->src[0]) || IS_64BIT(inst->src[1]) || IS_64BIT(inst->src[2])) return true; } #undef IS_64BIT #undef IS_DWORD if (devinfo->gen >= 8) { if (inst->opcode == BRW_OPCODE_F32TO16) return true; } /* * mlen: * In the presence of send messages, totally interrupt dependency * control. They're long enough that the chance of dependency * control around them just doesn't matter. * * predicate: * From the Ivy Bridge PRM, volume 4 part 3.7, page 80: * When a sequence of NoDDChk and NoDDClr are used, the last instruction that * completes the scoreboard clear must have a non-zero execution mask. This * means, if any kind of predication can change the execution mask or channel * enable of the last instruction, the optimization must be avoided. This is * to avoid instructions being shot down the pipeline when no writes are * required. * * math: * Dependency control does not work well over math instructions. * NB: Discovered empirically */ return (inst->mlen || inst->predicate || inst->is_math()); } /** * Sets the dependency control fields on instructions after register * allocation and before the generator is run. * * When you have a sequence of instructions like: * * DP4 temp.x vertex uniform[0] * DP4 temp.y vertex uniform[0] * DP4 temp.z vertex uniform[0] * DP4 temp.w vertex uniform[0] * * The hardware doesn't know that it can actually run the later instructions * while the previous ones are in flight, producing stalls. However, we have * manual fields we can set in the instructions that let it do so. */ void vec4_visitor::opt_set_dependency_control() { vec4_instruction *last_grf_write[BRW_MAX_GRF]; uint8_t grf_channels_written[BRW_MAX_GRF]; vec4_instruction *last_mrf_write[BRW_MAX_GRF]; uint8_t mrf_channels_written[BRW_MAX_GRF]; assert(prog_data->total_grf || !"Must be called after register allocation"); foreach_block (block, cfg) { memset(last_grf_write, 0, sizeof(last_grf_write)); memset(last_mrf_write, 0, sizeof(last_mrf_write)); foreach_inst_in_block (vec4_instruction, inst, block) { /* If we read from a register that we were doing dependency control * on, don't do dependency control across the read. */ for (int i = 0; i < 3; i++) { int reg = inst->src[i].nr + inst->src[i].offset / REG_SIZE; if (inst->src[i].file == VGRF) { last_grf_write[reg] = NULL; } else if (inst->src[i].file == FIXED_GRF) { memset(last_grf_write, 0, sizeof(last_grf_write)); break; } assert(inst->src[i].file != MRF); } if (is_dep_ctrl_unsafe(inst)) { memset(last_grf_write, 0, sizeof(last_grf_write)); memset(last_mrf_write, 0, sizeof(last_mrf_write)); continue; } /* Now, see if we can do dependency control for this instruction * against a previous one writing to its destination. */ int reg = inst->dst.nr + inst->dst.offset / REG_SIZE; if (inst->dst.file == VGRF || inst->dst.file == FIXED_GRF) { if (last_grf_write[reg] && last_grf_write[reg]->dst.offset == inst->dst.offset && !(inst->dst.writemask & grf_channels_written[reg])) { last_grf_write[reg]->no_dd_clear = true; inst->no_dd_check = true; } else { grf_channels_written[reg] = 0; } last_grf_write[reg] = inst; grf_channels_written[reg] |= inst->dst.writemask; } else if (inst->dst.file == MRF) { if (last_mrf_write[reg] && last_mrf_write[reg]->dst.offset == inst->dst.offset && !(inst->dst.writemask & mrf_channels_written[reg])) { last_mrf_write[reg]->no_dd_clear = true; inst->no_dd_check = true; } else { mrf_channels_written[reg] = 0; } last_mrf_write[reg] = inst; mrf_channels_written[reg] |= inst->dst.writemask; } } } } bool vec4_instruction::can_reswizzle(const struct gen_device_info *devinfo, int dst_writemask, int swizzle, int swizzle_mask) { /* Gen6 MATH instructions can not execute in align16 mode, so swizzles * are not allowed. */ if (devinfo->gen == 6 && is_math() && swizzle != BRW_SWIZZLE_XYZW) return false; /* We can't swizzle implicit accumulator access. We'd have to * reswizzle the producer of the accumulator value in addition * to the consumer (i.e. both MUL and MACH). Just skip this. */ if (reads_accumulator_implicitly()) return false; if (!can_do_writemask(devinfo) && dst_writemask != WRITEMASK_XYZW) return false; /* If this instruction sets anything not referenced by swizzle, then we'd * totally break it when we reswizzle. */ if (dst.writemask & ~swizzle_mask) return false; if (mlen > 0) return false; for (int i = 0; i < 3; i++) { if (src[i].is_accumulator()) return false; } return true; } /** * For any channels in the swizzle's source that were populated by this * instruction, rewrite the instruction to put the appropriate result directly * in those channels. * * e.g. for swizzle=yywx, MUL a.xy b c -> MUL a.yy_x b.yy z.yy_x */ void vec4_instruction::reswizzle(int dst_writemask, int swizzle) { /* Destination write mask doesn't correspond to source swizzle for the dot * product and pack_bytes instructions. */ if (opcode != BRW_OPCODE_DP4 && opcode != BRW_OPCODE_DPH && opcode != BRW_OPCODE_DP3 && opcode != BRW_OPCODE_DP2 && opcode != VEC4_OPCODE_PACK_BYTES) { for (int i = 0; i < 3; i++) { if (src[i].file == BAD_FILE || src[i].file == IMM) continue; src[i].swizzle = brw_compose_swizzle(swizzle, src[i].swizzle); } } /* Apply the specified swizzle and writemask to the original mask of * written components. */ dst.writemask = dst_writemask & brw_apply_swizzle_to_mask(swizzle, dst.writemask); } /* * Tries to reduce extra MOV instructions by taking temporary GRFs that get * just written and then MOVed into another reg and making the original write * of the GRF write directly to the final destination instead. */ bool vec4_visitor::opt_register_coalesce() { bool progress = false; int next_ip = 0; calculate_live_intervals(); foreach_block_and_inst_safe (block, vec4_instruction, inst, cfg) { int ip = next_ip; next_ip++; if (inst->opcode != BRW_OPCODE_MOV || (inst->dst.file != VGRF && inst->dst.file != MRF) || inst->predicate || inst->src[0].file != VGRF || inst->dst.type != inst->src[0].type || inst->src[0].abs || inst->src[0].negate || inst->src[0].reladdr) continue; /* Remove no-op MOVs */ if (inst->dst.file == inst->src[0].file && inst->dst.nr == inst->src[0].nr && inst->dst.offset == inst->src[0].offset) { bool is_nop_mov = true; for (unsigned c = 0; c < 4; c++) { if ((inst->dst.writemask & (1 << c)) == 0) continue; if (BRW_GET_SWZ(inst->src[0].swizzle, c) != c) { is_nop_mov = false; break; } } if (is_nop_mov) { inst->remove(block); progress = true; continue; } } bool to_mrf = (inst->dst.file == MRF); /* Can't coalesce this GRF if someone else was going to * read it later. */ if (var_range_end(var_from_reg(alloc, dst_reg(inst->src[0])), 8) > ip) continue; /* We need to check interference with the final destination between this * instruction and the earliest instruction involved in writing the GRF * we're eliminating. To do that, keep track of which of our source * channels we've seen initialized. */ const unsigned chans_needed = brw_apply_inv_swizzle_to_mask(inst->src[0].swizzle, inst->dst.writemask); unsigned chans_remaining = chans_needed; /* Now walk up the instruction stream trying to see if we can rewrite * everything writing to the temporary to write into the destination * instead. */ vec4_instruction *_scan_inst = (vec4_instruction *)inst->prev; foreach_inst_in_block_reverse_starting_from(vec4_instruction, scan_inst, inst) { _scan_inst = scan_inst; if (regions_overlap(inst->src[0], inst->size_read(0), scan_inst->dst, scan_inst->size_written)) { /* Found something writing to the reg we want to coalesce away. */ if (to_mrf) { /* SEND instructions can't have MRF as a destination. */ if (scan_inst->mlen) break; if (devinfo->gen == 6) { /* gen6 math instructions must have the destination be * VGRF, so no compute-to-MRF for them. */ if (scan_inst->is_math()) { break; } } } /* This doesn't handle saturation on the instruction we * want to coalesce away if the register types do not match. * But if scan_inst is a non type-converting 'mov', we can fix * the types later. */ if (inst->saturate && inst->dst.type != scan_inst->dst.type && !(scan_inst->opcode == BRW_OPCODE_MOV && scan_inst->dst.type == scan_inst->src[0].type)) break; /* Only allow coalescing between registers of the same type size. * Otherwise we would need to make the pass aware of the fact that * channel sizes are different for single and double precision. */ if (type_sz(inst->src[0].type) != type_sz(scan_inst->src[0].type)) break; /* Check that scan_inst writes the same amount of data as the * instruction, otherwise coalescing would lead to writing a * different (larger or smaller) region of the destination */ if (scan_inst->size_written != inst->size_written) break; /* If we can't handle the swizzle, bail. */ if (!scan_inst->can_reswizzle(devinfo, inst->dst.writemask, inst->src[0].swizzle, chans_needed)) { break; } /* This only handles coalescing writes of 8 channels (1 register * for single-precision and 2 registers for double-precision) * starting at the source offset of the copy instruction. */ if (DIV_ROUND_UP(scan_inst->size_written, type_sz(scan_inst->dst.type)) > 8 || scan_inst->dst.offset != inst->src[0].offset) break; /* Mark which channels we found unconditional writes for. */ if (!scan_inst->predicate) chans_remaining &= ~scan_inst->dst.writemask; if (chans_remaining == 0) break; } /* You can't read from an MRF, so if someone else reads our MRF's * source GRF that we wanted to rewrite, that stops us. If it's a * GRF we're trying to coalesce to, we don't actually handle * rewriting sources so bail in that case as well. */ bool interfered = false; for (int i = 0; i < 3; i++) { if (regions_overlap(inst->src[0], inst->size_read(0), scan_inst->src[i], scan_inst->size_read(i))) interfered = true; } if (interfered) break; /* If somebody else writes the same channels of our destination here, * we can't coalesce before that. */ if (regions_overlap(inst->dst, inst->size_written, scan_inst->dst, scan_inst->size_written) && (inst->dst.writemask & scan_inst->dst.writemask) != 0) { break; } /* Check for reads of the register we're trying to coalesce into. We * can't go rewriting instructions above that to put some other value * in the register instead. */ if (to_mrf && scan_inst->mlen > 0) { if (inst->dst.nr >= scan_inst->base_mrf && inst->dst.nr < scan_inst->base_mrf + scan_inst->mlen) { break; } } else { for (int i = 0; i < 3; i++) { if (regions_overlap(inst->dst, inst->size_written, scan_inst->src[i], scan_inst->size_read(i))) interfered = true; } if (interfered) break; } } if (chans_remaining == 0) { /* If we've made it here, we have an MOV we want to coalesce out, and * a scan_inst pointing to the earliest instruction involved in * computing the value. Now go rewrite the instruction stream * between the two. */ vec4_instruction *scan_inst = _scan_inst; while (scan_inst != inst) { if (scan_inst->dst.file == VGRF && scan_inst->dst.nr == inst->src[0].nr && scan_inst->dst.offset == inst->src[0].offset) { scan_inst->reswizzle(inst->dst.writemask, inst->src[0].swizzle); scan_inst->dst.file = inst->dst.file; scan_inst->dst.nr = inst->dst.nr; scan_inst->dst.offset = inst->dst.offset; if (inst->saturate && inst->dst.type != scan_inst->dst.type) { /* If we have reached this point, scan_inst is a non * type-converting 'mov' and we can modify its register types * to match the ones in inst. Otherwise, we could have an * incorrect saturation result. */ scan_inst->dst.type = inst->dst.type; scan_inst->src[0].type = inst->src[0].type; } scan_inst->saturate |= inst->saturate; } scan_inst = (vec4_instruction *)scan_inst->next; } inst->remove(block); progress = true; } } if (progress) invalidate_live_intervals(); return progress; } /** * Eliminate FIND_LIVE_CHANNEL instructions occurring outside any control * flow. We could probably do better here with some form of divergence * analysis. */ bool vec4_visitor::eliminate_find_live_channel() { bool progress = false; unsigned depth = 0; if (!brw_stage_has_packed_dispatch(devinfo, stage, stage_prog_data)) { /* The optimization below assumes that channel zero is live on thread * dispatch, which may not be the case if the fixed function dispatches * threads sparsely. */ return false; } foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) { switch (inst->opcode) { case BRW_OPCODE_IF: case BRW_OPCODE_DO: depth++; break; case BRW_OPCODE_ENDIF: case BRW_OPCODE_WHILE: depth--; break; case SHADER_OPCODE_FIND_LIVE_CHANNEL: if (depth == 0) { inst->opcode = BRW_OPCODE_MOV; inst->src[0] = brw_imm_d(0); inst->force_writemask_all = true; progress = true; } break; default: break; } } return progress; } /** * Splits virtual GRFs requesting more than one contiguous physical register. * * We initially create large virtual GRFs for temporary structures, arrays, * and matrices, so that the visitor functions can add offsets to work their * way down to the actual member being accessed. But when it comes to * optimization, we'd like to treat each register as individual storage if * possible. * * So far, the only thing that might prevent splitting is a send message from * a GRF on IVB. */ void vec4_visitor::split_virtual_grfs() { int num_vars = this->alloc.count; int new_virtual_grf[num_vars]; bool split_grf[num_vars]; memset(new_virtual_grf, 0, sizeof(new_virtual_grf)); /* Try to split anything > 0 sized. */ for (int i = 0; i < num_vars; i++) { split_grf[i] = this->alloc.sizes[i] != 1; } /* Check that the instructions are compatible with the registers we're trying * to split. */ foreach_block_and_inst(block, vec4_instruction, inst, cfg) { if (inst->dst.file == VGRF && regs_written(inst) > 1) split_grf[inst->dst.nr] = false; for (int i = 0; i < 3; i++) { if (inst->src[i].file == VGRF && regs_read(inst, i) > 1) split_grf[inst->src[i].nr] = false; } } /* Allocate new space for split regs. Note that the virtual * numbers will be contiguous. */ for (int i = 0; i < num_vars; i++) { if (!split_grf[i]) continue; new_virtual_grf[i] = alloc.allocate(1); for (unsigned j = 2; j < this->alloc.sizes[i]; j++) { unsigned reg = alloc.allocate(1); assert(reg == new_virtual_grf[i] + j - 1); (void) reg; } this->alloc.sizes[i] = 1; } foreach_block_and_inst(block, vec4_instruction, inst, cfg) { if (inst->dst.file == VGRF && split_grf[inst->dst.nr] && inst->dst.offset / REG_SIZE != 0) { inst->dst.nr = (new_virtual_grf[inst->dst.nr] + inst->dst.offset / REG_SIZE - 1); inst->dst.offset %= REG_SIZE; } for (int i = 0; i < 3; i++) { if (inst->src[i].file == VGRF && split_grf[inst->src[i].nr] && inst->src[i].offset / REG_SIZE != 0) { inst->src[i].nr = (new_virtual_grf[inst->src[i].nr] + inst->src[i].offset / REG_SIZE - 1); inst->src[i].offset %= REG_SIZE; } } } invalidate_live_intervals(); } void vec4_visitor::dump_instruction(backend_instruction *be_inst) { dump_instruction(be_inst, stderr); } void vec4_visitor::dump_instruction(backend_instruction *be_inst, FILE *file) { vec4_instruction *inst = (vec4_instruction *)be_inst; if (inst->predicate) { fprintf(file, "(%cf%d.%d%s) ", inst->predicate_inverse ? '-' : '+', inst->flag_subreg / 2, inst->flag_subreg % 2, pred_ctrl_align16[inst->predicate]); } fprintf(file, "%s(%d)", brw_instruction_name(devinfo, inst->opcode), inst->exec_size); if (inst->saturate) fprintf(file, ".sat"); if (inst->conditional_mod) { fprintf(file, "%s", conditional_modifier[inst->conditional_mod]); if (!inst->predicate && (devinfo->gen < 5 || (inst->opcode != BRW_OPCODE_SEL && inst->opcode != BRW_OPCODE_CSEL && inst->opcode != BRW_OPCODE_IF && inst->opcode != BRW_OPCODE_WHILE))) { fprintf(file, ".f%d.%d", inst->flag_subreg / 2, inst->flag_subreg % 2); } } fprintf(file, " "); switch (inst->dst.file) { case VGRF: fprintf(file, "vgrf%d", inst->dst.nr); break; case FIXED_GRF: fprintf(file, "g%d", inst->dst.nr); break; case MRF: fprintf(file, "m%d", inst->dst.nr); break; case ARF: switch (inst->dst.nr) { case BRW_ARF_NULL: fprintf(file, "null"); break; case BRW_ARF_ADDRESS: fprintf(file, "a0.%d", inst->dst.subnr); break; case BRW_ARF_ACCUMULATOR: fprintf(file, "acc%d", inst->dst.subnr); break; case BRW_ARF_FLAG: fprintf(file, "f%d.%d", inst->dst.nr & 0xf, inst->dst.subnr); break; default: fprintf(file, "arf%d.%d", inst->dst.nr & 0xf, inst->dst.subnr); break; } break; case BAD_FILE: fprintf(file, "(null)"); break; case IMM: case ATTR: case UNIFORM: unreachable("not reached"); } if (inst->dst.offset || (inst->dst.file == VGRF && alloc.sizes[inst->dst.nr] * REG_SIZE != inst->size_written)) { const unsigned reg_size = (inst->dst.file == UNIFORM ? 16 : REG_SIZE); fprintf(file, "+%d.%d", inst->dst.offset / reg_size, inst->dst.offset % reg_size); } if (inst->dst.writemask != WRITEMASK_XYZW) { fprintf(file, "."); if (inst->dst.writemask & 1) fprintf(file, "x"); if (inst->dst.writemask & 2) fprintf(file, "y"); if (inst->dst.writemask & 4) fprintf(file, "z"); if (inst->dst.writemask & 8) fprintf(file, "w"); } fprintf(file, ":%s", brw_reg_type_to_letters(inst->dst.type)); if (inst->src[0].file != BAD_FILE) fprintf(file, ", "); for (int i = 0; i < 3 && inst->src[i].file != BAD_FILE; i++) { if (inst->src[i].negate) fprintf(file, "-"); if (inst->src[i].abs) fprintf(file, "|"); switch (inst->src[i].file) { case VGRF: fprintf(file, "vgrf%d", inst->src[i].nr); break; case FIXED_GRF: fprintf(file, "g%d.%d", inst->src[i].nr, inst->src[i].subnr); break; case ATTR: fprintf(file, "attr%d", inst->src[i].nr); break; case UNIFORM: fprintf(file, "u%d", inst->src[i].nr); break; case IMM: switch (inst->src[i].type) { case BRW_REGISTER_TYPE_F: fprintf(file, "%fF", inst->src[i].f); break; case BRW_REGISTER_TYPE_DF: fprintf(file, "%fDF", inst->src[i].df); break; case BRW_REGISTER_TYPE_D: fprintf(file, "%dD", inst->src[i].d); break; case BRW_REGISTER_TYPE_UD: fprintf(file, "%uU", inst->src[i].ud); break; case BRW_REGISTER_TYPE_VF: fprintf(file, "[%-gF, %-gF, %-gF, %-gF]", brw_vf_to_float((inst->src[i].ud >> 0) & 0xff), brw_vf_to_float((inst->src[i].ud >> 8) & 0xff), brw_vf_to_float((inst->src[i].ud >> 16) & 0xff), brw_vf_to_float((inst->src[i].ud >> 24) & 0xff)); break; default: fprintf(file, "???"); break; } break; case ARF: switch (inst->src[i].nr) { case BRW_ARF_NULL: fprintf(file, "null"); break; case BRW_ARF_ADDRESS: fprintf(file, "a0.%d", inst->src[i].subnr); break; case BRW_ARF_ACCUMULATOR: fprintf(file, "acc%d", inst->src[i].subnr); break; case BRW_ARF_FLAG: fprintf(file, "f%d.%d", inst->src[i].nr & 0xf, inst->src[i].subnr); break; default: fprintf(file, "arf%d.%d", inst->src[i].nr & 0xf, inst->src[i].subnr); break; } break; case BAD_FILE: fprintf(file, "(null)"); break; case MRF: unreachable("not reached"); } if (inst->src[i].offset || (inst->src[i].file == VGRF && alloc.sizes[inst->src[i].nr] * REG_SIZE != inst->size_read(i))) { const unsigned reg_size = (inst->src[i].file == UNIFORM ? 16 : REG_SIZE); fprintf(file, "+%d.%d", inst->src[i].offset / reg_size, inst->src[i].offset % reg_size); } if (inst->src[i].file != IMM) { static const char *chans[4] = {"x", "y", "z", "w"}; fprintf(file, "."); for (int c = 0; c < 4; c++) { fprintf(file, "%s", chans[BRW_GET_SWZ(inst->src[i].swizzle, c)]); } } if (inst->src[i].abs) fprintf(file, "|"); if (inst->src[i].file != IMM) { fprintf(file, ":%s", brw_reg_type_to_letters(inst->src[i].type)); } if (i < 2 && inst->src[i + 1].file != BAD_FILE) fprintf(file, ", "); } if (inst->force_writemask_all) fprintf(file, " NoMask"); if (inst->exec_size != 8) fprintf(file, " group%d", inst->group); fprintf(file, "\n"); } int vec4_vs_visitor::setup_attributes(int payload_reg) { foreach_block_and_inst(block, vec4_instruction, inst, cfg) { for (int i = 0; i < 3; i++) { if (inst->src[i].file == ATTR) { assert(inst->src[i].offset % REG_SIZE == 0); int grf = payload_reg + inst->src[i].nr + inst->src[i].offset / REG_SIZE; struct brw_reg reg = brw_vec8_grf(grf, 0); reg.swizzle = inst->src[i].swizzle; reg.type = inst->src[i].type; reg.abs = inst->src[i].abs; reg.negate = inst->src[i].negate; inst->src[i] = reg; } } } return payload_reg + vs_prog_data->nr_attribute_slots; } int vec4_visitor::setup_uniforms(int reg) { prog_data->base.dispatch_grf_start_reg = reg; /* The pre-gen6 VS requires that some push constants get loaded no * matter what, or the GPU would hang. */ if (devinfo->gen < 6 && this->uniforms == 0) { brw_stage_prog_data_add_params(stage_prog_data, 4); for (unsigned int i = 0; i < 4; i++) { unsigned int slot = this->uniforms * 4 + i; stage_prog_data->param[slot] = BRW_PARAM_BUILTIN_ZERO; } this->uniforms++; reg++; } else { reg += ALIGN(uniforms, 2) / 2; } for (int i = 0; i < 4; i++) reg += stage_prog_data->ubo_ranges[i].length; stage_prog_data->nr_params = this->uniforms * 4; prog_data->base.curb_read_length = reg - prog_data->base.dispatch_grf_start_reg; return reg; } void vec4_vs_visitor::setup_payload(void) { int reg = 0; /* The payload always contains important data in g0, which contains * the URB handles that are passed on to the URB write at the end * of the thread. So, we always start push constants at g1. */ reg++; reg = setup_uniforms(reg); reg = setup_attributes(reg); this->first_non_payload_grf = reg; } bool vec4_visitor::lower_minmax() { assert(devinfo->gen < 6); bool progress = false; foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) { const vec4_builder ibld(this, block, inst); if (inst->opcode == BRW_OPCODE_SEL && inst->predicate == BRW_PREDICATE_NONE) { /* FIXME: Using CMP doesn't preserve the NaN propagation semantics of * the original SEL.L/GE instruction */ ibld.CMP(ibld.null_reg_d(), inst->src[0], inst->src[1], inst->conditional_mod); inst->predicate = BRW_PREDICATE_NORMAL; inst->conditional_mod = BRW_CONDITIONAL_NONE; progress = true; } } if (progress) invalidate_live_intervals(); return progress; } src_reg vec4_visitor::get_timestamp() { assert(devinfo->gen >= 7); src_reg ts = src_reg(brw_reg(BRW_ARCHITECTURE_REGISTER_FILE, BRW_ARF_TIMESTAMP, 0, 0, 0, BRW_REGISTER_TYPE_UD, BRW_VERTICAL_STRIDE_0, BRW_WIDTH_4, BRW_HORIZONTAL_STRIDE_4, BRW_SWIZZLE_XYZW, WRITEMASK_XYZW)); dst_reg dst = dst_reg(this, glsl_type::uvec4_type); vec4_instruction *mov = emit(MOV(dst, ts)); /* We want to read the 3 fields we care about (mostly field 0, but also 2) * even if it's not enabled in the dispatch. */ mov->force_writemask_all = true; return src_reg(dst); } void vec4_visitor::emit_shader_time_begin() { current_annotation = "shader time start"; shader_start_time = get_timestamp(); } void vec4_visitor::emit_shader_time_end() { current_annotation = "shader time end"; src_reg shader_end_time = get_timestamp(); /* Check that there weren't any timestamp reset events (assuming these * were the only two timestamp reads that happened). */ src_reg reset_end = shader_end_time; reset_end.swizzle = BRW_SWIZZLE_ZZZZ; vec4_instruction *test = emit(AND(dst_null_ud(), reset_end, brw_imm_ud(1u))); test->conditional_mod = BRW_CONDITIONAL_Z; emit(IF(BRW_PREDICATE_NORMAL)); /* Take the current timestamp and get the delta. */ shader_start_time.negate = true; dst_reg diff = dst_reg(this, glsl_type::uint_type); emit(ADD(diff, shader_start_time, shader_end_time)); /* If there were no instructions between the two timestamp gets, the diff * is 2 cycles. Remove that overhead, so I can forget about that when * trying to determine the time taken for single instructions. */ emit(ADD(diff, src_reg(diff), brw_imm_ud(-2u))); emit_shader_time_write(0, src_reg(diff)); emit_shader_time_write(1, brw_imm_ud(1u)); emit(BRW_OPCODE_ELSE); emit_shader_time_write(2, brw_imm_ud(1u)); emit(BRW_OPCODE_ENDIF); } void vec4_visitor::emit_shader_time_write(int shader_time_subindex, src_reg value) { dst_reg dst = dst_reg(this, glsl_type::get_array_instance(glsl_type::vec4_type, 2)); dst_reg offset = dst; dst_reg time = dst; time.offset += REG_SIZE; offset.type = BRW_REGISTER_TYPE_UD; int index = shader_time_index * 3 + shader_time_subindex; emit(MOV(offset, brw_imm_d(index * BRW_SHADER_TIME_STRIDE))); time.type = BRW_REGISTER_TYPE_UD; emit(MOV(time, value)); vec4_instruction *inst = emit(SHADER_OPCODE_SHADER_TIME_ADD, dst_reg(), src_reg(dst)); inst->mlen = 2; } static bool is_align1_df(vec4_instruction *inst) { switch (inst->opcode) { case VEC4_OPCODE_DOUBLE_TO_F32: case VEC4_OPCODE_DOUBLE_TO_D32: case VEC4_OPCODE_DOUBLE_TO_U32: case VEC4_OPCODE_TO_DOUBLE: case VEC4_OPCODE_PICK_LOW_32BIT: case VEC4_OPCODE_PICK_HIGH_32BIT: case VEC4_OPCODE_SET_LOW_32BIT: case VEC4_OPCODE_SET_HIGH_32BIT: return true; default: return false; } } /** * Three source instruction must have a GRF/MRF destination register. * ARF NULL is not allowed. Fix that up by allocating a temporary GRF. */ void vec4_visitor::fixup_3src_null_dest() { bool progress = false; foreach_block_and_inst_safe (block, vec4_instruction, inst, cfg) { if (inst->is_3src(devinfo) && inst->dst.is_null()) { const unsigned size_written = type_sz(inst->dst.type); const unsigned num_regs = DIV_ROUND_UP(size_written, REG_SIZE); inst->dst = retype(dst_reg(VGRF, alloc.allocate(num_regs)), inst->dst.type); progress = true; } } if (progress) invalidate_live_intervals(); } void vec4_visitor::convert_to_hw_regs() { foreach_block_and_inst(block, vec4_instruction, inst, cfg) { for (int i = 0; i < 3; i++) { class src_reg &src = inst->src[i]; struct brw_reg reg; switch (src.file) { case VGRF: { reg = byte_offset(brw_vecn_grf(4, src.nr, 0), src.offset); reg.type = src.type; reg.abs = src.abs; reg.negate = src.negate; break; } case UNIFORM: { reg = stride(byte_offset(brw_vec4_grf( prog_data->base.dispatch_grf_start_reg + src.nr / 2, src.nr % 2 * 4), src.offset), 0, 4, 1); reg.type = src.type; reg.abs = src.abs; reg.negate = src.negate; /* This should have been moved to pull constants. */ assert(!src.reladdr); break; } case FIXED_GRF: if (type_sz(src.type) == 8) { reg = src.as_brw_reg(); break; } /* fallthrough */ case ARF: case IMM: continue; case BAD_FILE: /* Probably unused. */ reg = brw_null_reg(); reg = retype(reg, src.type); break; case MRF: case ATTR: unreachable("not reached"); } apply_logical_swizzle(®, inst, i); src = reg; /* From IVB PRM, vol4, part3, "General Restrictions on Regioning * Parameters": * * "If ExecSize = Width and HorzStride ≠ 0, VertStride must be set * to Width * HorzStride." * * We can break this rule with DF sources on DF align1 * instructions, because the exec_size would be 4 and width is 4. * As we know we are not accessing to next GRF, it is safe to * set vstride to the formula given by the rule itself. */ if (is_align1_df(inst) && (cvt(inst->exec_size) - 1) == src.width) src.vstride = src.width + src.hstride; } if (inst->is_3src(devinfo)) { /* 3-src instructions with scalar sources support arbitrary subnr, * but don't actually use swizzles. Convert swizzle into subnr. * Skip this for double-precision instructions: RepCtrl=1 is not * allowed for them and needs special handling. */ for (int i = 0; i < 3; i++) { if (inst->src[i].vstride == BRW_VERTICAL_STRIDE_0 && type_sz(inst->src[i].type) < 8) { assert(brw_is_single_value_swizzle(inst->src[i].swizzle)); inst->src[i].subnr += 4 * BRW_GET_SWZ(inst->src[i].swizzle, 0); } } } dst_reg &dst = inst->dst; struct brw_reg reg; switch (inst->dst.file) { case VGRF: reg = byte_offset(brw_vec8_grf(dst.nr, 0), dst.offset); reg.type = dst.type; reg.writemask = dst.writemask; break; case MRF: reg = byte_offset(brw_message_reg(dst.nr), dst.offset); assert((reg.nr & ~BRW_MRF_COMPR4) < BRW_MAX_MRF(devinfo->gen)); reg.type = dst.type; reg.writemask = dst.writemask; break; case ARF: case FIXED_GRF: reg = dst.as_brw_reg(); break; case BAD_FILE: reg = brw_null_reg(); reg = retype(reg, dst.type); break; case IMM: case ATTR: case UNIFORM: unreachable("not reached"); } dst = reg; } } static bool stage_uses_interleaved_attributes(unsigned stage, enum shader_dispatch_mode dispatch_mode) { switch (stage) { case MESA_SHADER_TESS_EVAL: return true; case MESA_SHADER_GEOMETRY: return dispatch_mode != DISPATCH_MODE_4X2_DUAL_OBJECT; default: return false; } } /** * Get the closest native SIMD width supported by the hardware for instruction * \p inst. The instruction will be left untouched by * vec4_visitor::lower_simd_width() if the returned value matches the * instruction's original execution size. */ static unsigned get_lowered_simd_width(const struct gen_device_info *devinfo, enum shader_dispatch_mode dispatch_mode, unsigned stage, const vec4_instruction *inst) { /* Do not split some instructions that require special handling */ switch (inst->opcode) { case SHADER_OPCODE_GEN4_SCRATCH_READ: case SHADER_OPCODE_GEN4_SCRATCH_WRITE: return inst->exec_size; default: break; } unsigned lowered_width = MIN2(16, inst->exec_size); /* We need to split some cases of double-precision instructions that write * 2 registers. We only need to care about this in gen7 because that is the * only hardware that implements fp64 in Align16. */ if (devinfo->gen == 7 && inst->size_written > REG_SIZE) { /* Align16 8-wide double-precision SEL does not work well. Verified * empirically. */ if (inst->opcode == BRW_OPCODE_SEL && type_sz(inst->dst.type) == 8) lowered_width = MIN2(lowered_width, 4); /* HSW PRM, 3D Media GPGPU Engine, Region Alignment Rules for Direct * Register Addressing: * * "When destination spans two registers, the source MUST span two * registers." */ for (unsigned i = 0; i < 3; i++) { if (inst->src[i].file == BAD_FILE) continue; if (inst->size_read(i) <= REG_SIZE) lowered_width = MIN2(lowered_width, 4); /* Interleaved attribute setups use a vertical stride of 0, which * makes them hit the associated instruction decompression bug in gen7. * Split them to prevent this. */ if (inst->src[i].file == ATTR && stage_uses_interleaved_attributes(stage, dispatch_mode)) lowered_width = MIN2(lowered_width, 4); } } /* IvyBridge can manage a maximum of 4 DFs per SIMD4x2 instruction, since * it doesn't support compression in Align16 mode, no matter if it has * force_writemask_all enabled or disabled (the latter is affected by the * compressed instruction bug in gen7, which is another reason to enforce * this limit). */ if (devinfo->gen == 7 && !devinfo->is_haswell && (get_exec_type_size(inst) == 8 || type_sz(inst->dst.type) == 8)) lowered_width = MIN2(lowered_width, 4); return lowered_width; } static bool dst_src_regions_overlap(vec4_instruction *inst) { if (inst->size_written == 0) return false; unsigned dst_start = inst->dst.offset; unsigned dst_end = dst_start + inst->size_written - 1; for (int i = 0; i < 3; i++) { if (inst->src[i].file == BAD_FILE) continue; if (inst->dst.file != inst->src[i].file || inst->dst.nr != inst->src[i].nr) continue; unsigned src_start = inst->src[i].offset; unsigned src_end = src_start + inst->size_read(i) - 1; if ((dst_start >= src_start && dst_start <= src_end) || (dst_end >= src_start && dst_end <= src_end) || (dst_start <= src_start && dst_end >= src_end)) { return true; } } return false; } bool vec4_visitor::lower_simd_width() { bool progress = false; foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) { const unsigned lowered_width = get_lowered_simd_width(devinfo, prog_data->dispatch_mode, stage, inst); assert(lowered_width <= inst->exec_size); if (lowered_width == inst->exec_size) continue; /* We need to deal with source / destination overlaps when splitting. * The hardware supports reading from and writing to the same register * in the same instruction, but we need to be careful that each split * instruction we produce does not corrupt the source of the next. * * The easiest way to handle this is to make the split instructions write * to temporaries if there is an src/dst overlap and then move from the * temporaries to the original destination. We also need to consider * instructions that do partial writes via align1 opcodes, in which case * we need to make sure that the we initialize the temporary with the * value of the instruction's dst. */ bool needs_temp = dst_src_regions_overlap(inst); for (unsigned n = 0; n < inst->exec_size / lowered_width; n++) { unsigned channel_offset = lowered_width * n; unsigned size_written = lowered_width * type_sz(inst->dst.type); /* Create the split instruction from the original so that we copy all * relevant instruction fields, then set the width and calculate the * new dst/src regions. */ vec4_instruction *linst = new(mem_ctx) vec4_instruction(*inst); linst->exec_size = lowered_width; linst->group = channel_offset; linst->size_written = size_written; /* Compute split dst region */ dst_reg dst; if (needs_temp) { unsigned num_regs = DIV_ROUND_UP(size_written, REG_SIZE); dst = retype(dst_reg(VGRF, alloc.allocate(num_regs)), inst->dst.type); if (inst->is_align1_partial_write()) { vec4_instruction *copy = MOV(dst, src_reg(inst->dst)); copy->exec_size = lowered_width; copy->group = channel_offset; copy->size_written = size_written; inst->insert_before(block, copy); } } else { dst = horiz_offset(inst->dst, channel_offset); } linst->dst = dst; /* Compute split source regions */ for (int i = 0; i < 3; i++) { if (linst->src[i].file == BAD_FILE) continue; bool is_interleaved_attr = linst->src[i].file == ATTR && stage_uses_interleaved_attributes(stage, prog_data->dispatch_mode); if (!is_uniform(linst->src[i]) && !is_interleaved_attr) linst->src[i] = horiz_offset(linst->src[i], channel_offset); } inst->insert_before(block, linst); /* If we used a temporary to store the result of the split * instruction, copy the result to the original destination */ if (needs_temp) { vec4_instruction *mov = MOV(offset(inst->dst, lowered_width, n), src_reg(dst)); mov->exec_size = lowered_width; mov->group = channel_offset; mov->size_written = size_written; mov->predicate = inst->predicate; inst->insert_before(block, mov); } } inst->remove(block); progress = true; } if (progress) invalidate_live_intervals(); return progress; } static brw_predicate scalarize_predicate(brw_predicate predicate, unsigned writemask) { if (predicate != BRW_PREDICATE_NORMAL) return predicate; switch (writemask) { case WRITEMASK_X: return BRW_PREDICATE_ALIGN16_REPLICATE_X; case WRITEMASK_Y: return BRW_PREDICATE_ALIGN16_REPLICATE_Y; case WRITEMASK_Z: return BRW_PREDICATE_ALIGN16_REPLICATE_Z; case WRITEMASK_W: return BRW_PREDICATE_ALIGN16_REPLICATE_W; default: unreachable("invalid writemask"); } } /* Gen7 has a hardware decompression bug that we can exploit to represent * handful of additional swizzles natively. */ static bool is_gen7_supported_64bit_swizzle(vec4_instruction *inst, unsigned arg) { switch (inst->src[arg].swizzle) { case BRW_SWIZZLE_XXXX: case BRW_SWIZZLE_YYYY: case BRW_SWIZZLE_ZZZZ: case BRW_SWIZZLE_WWWW: case BRW_SWIZZLE_XYXY: case BRW_SWIZZLE_YXYX: case BRW_SWIZZLE_ZWZW: case BRW_SWIZZLE_WZWZ: return true; default: return false; } } /* 64-bit sources use regions with a width of 2. These 2 elements in each row * can be addressed using 32-bit swizzles (which is what the hardware supports) * but it also means that the swizzle we apply on the first two components of a * dvec4 is coupled with the swizzle we use for the last 2. In other words, * only some specific swizzle combinations can be natively supported. * * FIXME: we can go an step further and implement even more swizzle * variations using only partial scalarization. * * For more details see: * https://bugs.freedesktop.org/show_bug.cgi?id=92760#c82 */ bool vec4_visitor::is_supported_64bit_region(vec4_instruction *inst, unsigned arg) { const src_reg &src = inst->src[arg]; assert(type_sz(src.type) == 8); /* Uniform regions have a vstride=0. Because we use 2-wide rows with * 64-bit regions it means that we cannot access components Z/W, so * return false for any such case. Interleaved attributes will also be * mapped to GRF registers with a vstride of 0, so apply the same * treatment. */ if ((is_uniform(src) || (stage_uses_interleaved_attributes(stage, prog_data->dispatch_mode) && src.file == ATTR)) && (brw_mask_for_swizzle(src.swizzle) & 12)) return false; switch (src.swizzle) { case BRW_SWIZZLE_XYZW: case BRW_SWIZZLE_XXZZ: case BRW_SWIZZLE_YYWW: case BRW_SWIZZLE_YXWZ: return true; default: return devinfo->gen == 7 && is_gen7_supported_64bit_swizzle(inst, arg); } } bool vec4_visitor::scalarize_df() { bool progress = false; foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) { /* Skip DF instructions that operate in Align1 mode */ if (is_align1_df(inst)) continue; /* Check if this is a double-precision instruction */ bool is_double = type_sz(inst->dst.type) == 8; for (int arg = 0; !is_double && arg < 3; arg++) { is_double = inst->src[arg].file != BAD_FILE && type_sz(inst->src[arg].type) == 8; } if (!is_double) continue; /* Skip the lowering for specific regioning scenarios that we can * support natively. */ bool skip_lowering = true; /* XY and ZW writemasks operate in 32-bit, which means that they don't * have a native 64-bit representation and they should always be split. */ if (inst->dst.writemask == WRITEMASK_XY || inst->dst.writemask == WRITEMASK_ZW) { skip_lowering = false; } else { for (unsigned i = 0; i < 3; i++) { if (inst->src[i].file == BAD_FILE || type_sz(inst->src[i].type) < 8) continue; skip_lowering = skip_lowering && is_supported_64bit_region(inst, i); } } if (skip_lowering) continue; /* Generate scalar instructions for each enabled channel */ for (unsigned chan = 0; chan < 4; chan++) { unsigned chan_mask = 1 << chan; if (!(inst->dst.writemask & chan_mask)) continue; vec4_instruction *scalar_inst = new(mem_ctx) vec4_instruction(*inst); for (unsigned i = 0; i < 3; i++) { unsigned swz = BRW_GET_SWZ(inst->src[i].swizzle, chan); scalar_inst->src[i].swizzle = BRW_SWIZZLE4(swz, swz, swz, swz); } scalar_inst->dst.writemask = chan_mask; if (inst->predicate != BRW_PREDICATE_NONE) { scalar_inst->predicate = scalarize_predicate(inst->predicate, chan_mask); } inst->insert_before(block, scalar_inst); } inst->remove(block); progress = true; } if (progress) invalidate_live_intervals(); return progress; } bool vec4_visitor::lower_64bit_mad_to_mul_add() { bool progress = false; foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) { if (inst->opcode != BRW_OPCODE_MAD) continue; if (type_sz(inst->dst.type) != 8) continue; dst_reg mul_dst = dst_reg(this, glsl_type::dvec4_type); /* Use the copy constructor so we copy all relevant instruction fields * from the original mad into the add and mul instructions */ vec4_instruction *mul = new(mem_ctx) vec4_instruction(*inst); mul->opcode = BRW_OPCODE_MUL; mul->dst = mul_dst; mul->src[0] = inst->src[1]; mul->src[1] = inst->src[2]; mul->src[2].file = BAD_FILE; vec4_instruction *add = new(mem_ctx) vec4_instruction(*inst); add->opcode = BRW_OPCODE_ADD; add->src[0] = src_reg(mul_dst); add->src[1] = inst->src[0]; add->src[2].file = BAD_FILE; inst->insert_before(block, mul); inst->insert_before(block, add); inst->remove(block); progress = true; } if (progress) invalidate_live_intervals(); return progress; } /* The align16 hardware can only do 32-bit swizzle channels, so we need to * translate the logical 64-bit swizzle channels that we use in the Vec4 IR * to 32-bit swizzle channels in hardware registers. * * @inst and @arg identify the original vec4 IR source operand we need to * translate the swizzle for and @hw_reg is the hardware register where we * will write the hardware swizzle to use. * * This pass assumes that Align16/DF instructions have been fully scalarized * previously so there is just one 64-bit swizzle channel to deal with for any * given Vec4 IR source. */ void vec4_visitor::apply_logical_swizzle(struct brw_reg *hw_reg, vec4_instruction *inst, int arg) { src_reg reg = inst->src[arg]; if (reg.file == BAD_FILE || reg.file == BRW_IMMEDIATE_VALUE) return; /* If this is not a 64-bit operand or this is a scalar instruction we don't * need to do anything about the swizzles. */ if(type_sz(reg.type) < 8 || is_align1_df(inst)) { hw_reg->swizzle = reg.swizzle; return; } /* Take the 64-bit logical swizzle channel and translate it to 32-bit */ assert(brw_is_single_value_swizzle(reg.swizzle) || is_supported_64bit_region(inst, arg)); /* Apply the region <2, 2, 1> for GRF or <0, 2, 1> for uniforms, as align16 * HW can only do 32-bit swizzle channels. */ hw_reg->width = BRW_WIDTH_2; if (is_supported_64bit_region(inst, arg) && !is_gen7_supported_64bit_swizzle(inst, arg)) { /* Supported 64-bit swizzles are those such that their first two * components, when expanded to 32-bit swizzles, match the semantics * of the original 64-bit swizzle with 2-wide row regioning. */ unsigned swizzle0 = BRW_GET_SWZ(reg.swizzle, 0); unsigned swizzle1 = BRW_GET_SWZ(reg.swizzle, 1); hw_reg->swizzle = BRW_SWIZZLE4(swizzle0 * 2, swizzle0 * 2 + 1, swizzle1 * 2, swizzle1 * 2 + 1); } else { /* If we got here then we have one of the following: * * 1. An unsupported swizzle, which should be single-value thanks to the * scalarization pass. * * 2. A gen7 supported swizzle. These can be single-value or double-value * swizzles. If the latter, they are never cross-dvec2 channels. For * these we always need to activate the gen7 vstride=0 exploit. */ unsigned swizzle0 = BRW_GET_SWZ(reg.swizzle, 0); unsigned swizzle1 = BRW_GET_SWZ(reg.swizzle, 1); assert((swizzle0 < 2) == (swizzle1 < 2)); /* To gain access to Z/W components we need to select the second half * of the register and then use a X/Y swizzle to select Z/W respectively. */ if (swizzle0 >= 2) { *hw_reg = suboffset(*hw_reg, 2); swizzle0 -= 2; swizzle1 -= 2; } /* All gen7-specific supported swizzles require the vstride=0 exploit */ if (devinfo->gen == 7 && is_gen7_supported_64bit_swizzle(inst, arg)) hw_reg->vstride = BRW_VERTICAL_STRIDE_0; /* Any 64-bit source with an offset at 16B is intended to address the * second half of a register and needs a vertical stride of 0 so we: * * 1. Don't violate register region restrictions. * 2. Activate the gen7 instruction decompresion bug exploit when * execsize > 4 */ if (hw_reg->subnr % REG_SIZE == 16) { assert(devinfo->gen == 7); hw_reg->vstride = BRW_VERTICAL_STRIDE_0; } hw_reg->swizzle = BRW_SWIZZLE4(swizzle0 * 2, swizzle0 * 2 + 1, swizzle1 * 2, swizzle1 * 2 + 1); } } bool vec4_visitor::run() { if (shader_time_index >= 0) emit_shader_time_begin(); emit_prolog(); emit_nir_code(); if (failed) return false; base_ir = NULL; emit_thread_end(); calculate_cfg(); /* Before any optimization, push array accesses out to scratch * space where we need them to be. This pass may allocate new * virtual GRFs, so we want to do it early. It also makes sure * that we have reladdr computations available for CSE, since we'll * often do repeated subexpressions for those. */ move_grf_array_access_to_scratch(); move_uniform_array_access_to_pull_constants(); pack_uniform_registers(); move_push_constants_to_pull_constants(); split_virtual_grfs(); #define OPT(pass, args...) ({ \ pass_num++; \ bool this_progress = pass(args); \ \ if (unlikely(INTEL_DEBUG & DEBUG_OPTIMIZER) && this_progress) { \ char filename[64]; \ snprintf(filename, 64, "%s-%s-%02d-%02d-" #pass, \ stage_abbrev, nir->info.name, iteration, pass_num); \ \ backend_shader::dump_instructions(filename); \ } \ \ progress = progress || this_progress; \ this_progress; \ }) if (unlikely(INTEL_DEBUG & DEBUG_OPTIMIZER)) { char filename[64]; snprintf(filename, 64, "%s-%s-00-00-start", stage_abbrev, nir->info.name); backend_shader::dump_instructions(filename); } bool progress; int iteration = 0; int pass_num = 0; do { progress = false; pass_num = 0; iteration++; OPT(opt_predicated_break, this); OPT(opt_reduce_swizzle); OPT(dead_code_eliminate); OPT(dead_control_flow_eliminate, this); OPT(opt_copy_propagation); OPT(opt_cmod_propagation); OPT(opt_cse); OPT(opt_algebraic); OPT(opt_register_coalesce); OPT(eliminate_find_live_channel); } while (progress); pass_num = 0; if (OPT(opt_vector_float)) { OPT(opt_cse); OPT(opt_copy_propagation, false); OPT(opt_copy_propagation, true); OPT(dead_code_eliminate); } if (devinfo->gen <= 5 && OPT(lower_minmax)) { OPT(opt_cmod_propagation); OPT(opt_cse); OPT(opt_copy_propagation); OPT(dead_code_eliminate); } if (OPT(lower_simd_width)) { OPT(opt_copy_propagation); OPT(dead_code_eliminate); } if (failed) return false; OPT(lower_64bit_mad_to_mul_add); /* Run this before payload setup because tesselation shaders * rely on it to prevent cross dvec2 regioning on DF attributes * that are setup so that XY are on the second half of register and * ZW are in the first half of the next. */ OPT(scalarize_df); setup_payload(); if (unlikely(INTEL_DEBUG & DEBUG_SPILL_VEC4)) { /* Debug of register spilling: Go spill everything. */ const int grf_count = alloc.count; float spill_costs[alloc.count]; bool no_spill[alloc.count]; evaluate_spill_costs(spill_costs, no_spill); for (int i = 0; i < grf_count; i++) { if (no_spill[i]) continue; spill_reg(i); } /* We want to run this after spilling because 64-bit (un)spills need to * emit code to shuffle 64-bit data for the 32-bit scratch read/write * messages that can produce unsupported 64-bit swizzle regions. */ OPT(scalarize_df); } fixup_3src_null_dest(); bool allocated_without_spills = reg_allocate(); if (!allocated_without_spills) { compiler->shader_perf_log(log_data, "%s shader triggered register spilling. " "Try reducing the number of live vec4 values " "to improve performance.\n", stage_name); while (!reg_allocate()) { if (failed) return false; } /* We want to run this after spilling because 64-bit (un)spills need to * emit code to shuffle 64-bit data for the 32-bit scratch read/write * messages that can produce unsupported 64-bit swizzle regions. */ OPT(scalarize_df); } opt_schedule_instructions(); opt_set_dependency_control(); convert_to_hw_regs(); if (last_scratch > 0) { prog_data->base.total_scratch = brw_get_scratch_size(last_scratch * REG_SIZE); } return !failed; } } /* namespace brw */ extern "C" { /** * Compile a vertex shader. * * Returns the final assembly and the program's size. */ const unsigned * brw_compile_vs(const struct brw_compiler *compiler, void *log_data, void *mem_ctx, const struct brw_vs_prog_key *key, struct brw_vs_prog_data *prog_data, const nir_shader *src_shader, int shader_time_index, char **error_str) { const bool is_scalar = compiler->scalar_stage[MESA_SHADER_VERTEX]; nir_shader *shader = nir_shader_clone(mem_ctx, src_shader); shader = brw_nir_apply_sampler_key(shader, compiler, &key->tex, is_scalar); const unsigned *assembly = NULL; if (prog_data->base.vue_map.varying_to_slot[VARYING_SLOT_EDGE] != -1) { /* If the output VUE map contains VARYING_SLOT_EDGE then we need to copy * the edge flag from VERT_ATTRIB_EDGEFLAG. This will be done * automatically by brw_vec4_visitor::emit_urb_slot but we need to * ensure that prog_data->inputs_read is accurate. * * In order to make late NIR passes aware of the change, we actually * whack shader->info.inputs_read instead. This is safe because we just * made a copy of the shader. */ assert(!is_scalar); assert(key->copy_edgeflag); shader->info.inputs_read |= VERT_BIT_EDGEFLAG; } prog_data->inputs_read = shader->info.inputs_read; prog_data->double_inputs_read = shader->info.vs.double_inputs; brw_nir_lower_vs_inputs(shader, key->gl_attrib_wa_flags); brw_nir_lower_vue_outputs(shader, is_scalar); shader = brw_postprocess_nir(shader, compiler, is_scalar); prog_data->base.clip_distance_mask = ((1 << shader->info.clip_distance_array_size) - 1); prog_data->base.cull_distance_mask = ((1 << shader->info.cull_distance_array_size) - 1) << shader->info.clip_distance_array_size; unsigned nr_attribute_slots = _mesa_bitcount_64(prog_data->inputs_read); /* gl_VertexID and gl_InstanceID are system values, but arrive via an * incoming vertex attribute. So, add an extra slot. */ if (shader->info.system_values_read & (BITFIELD64_BIT(SYSTEM_VALUE_BASE_VERTEX) | BITFIELD64_BIT(SYSTEM_VALUE_BASE_INSTANCE) | BITFIELD64_BIT(SYSTEM_VALUE_VERTEX_ID_ZERO_BASE) | BITFIELD64_BIT(SYSTEM_VALUE_INSTANCE_ID))) { nr_attribute_slots++; } if (shader->info.system_values_read & BITFIELD64_BIT(SYSTEM_VALUE_BASE_VERTEX)) prog_data->uses_basevertex = true; if (shader->info.system_values_read & BITFIELD64_BIT(SYSTEM_VALUE_BASE_INSTANCE)) prog_data->uses_baseinstance = true; if (shader->info.system_values_read & BITFIELD64_BIT(SYSTEM_VALUE_VERTEX_ID_ZERO_BASE)) prog_data->uses_vertexid = true; if (shader->info.system_values_read & BITFIELD64_BIT(SYSTEM_VALUE_INSTANCE_ID)) prog_data->uses_instanceid = true; /* gl_DrawID has its very own vec4 */ if (shader->info.system_values_read & BITFIELD64_BIT(SYSTEM_VALUE_DRAW_ID)) { prog_data->uses_drawid = true; nr_attribute_slots++; } /* The 3DSTATE_VS documentation lists the lower bound on "Vertex URB Entry * Read Length" as 1 in vec4 mode, and 0 in SIMD8 mode. Empirically, in * vec4 mode, the hardware appears to wedge unless we read something. */ if (is_scalar) prog_data->base.urb_read_length = DIV_ROUND_UP(nr_attribute_slots, 2); else prog_data->base.urb_read_length = DIV_ROUND_UP(MAX2(nr_attribute_slots, 1), 2); prog_data->nr_attribute_slots = nr_attribute_slots; /* Since vertex shaders reuse the same VUE entry for inputs and outputs * (overwriting the original contents), we need to make sure the size is * the larger of the two. */ const unsigned vue_entries = MAX2(nr_attribute_slots, (unsigned)prog_data->base.vue_map.num_slots); if (compiler->devinfo->gen == 6) { prog_data->base.urb_entry_size = DIV_ROUND_UP(vue_entries, 8); } else { prog_data->base.urb_entry_size = DIV_ROUND_UP(vue_entries, 4); /* On Cannonlake software shall not program an allocation size that * specifies a size that is a multiple of 3 64B (512-bit) cachelines. */ if (compiler->devinfo->gen == 10 && prog_data->base.urb_entry_size % 3 == 0) prog_data->base.urb_entry_size++; } if (INTEL_DEBUG & DEBUG_VS) { fprintf(stderr, "VS Output "); brw_print_vue_map(stderr, &prog_data->base.vue_map); } if (is_scalar) { prog_data->base.dispatch_mode = DISPATCH_MODE_SIMD8; fs_visitor v(compiler, log_data, mem_ctx, key, &prog_data->base.base, NULL, /* prog; Only used for TEXTURE_RECTANGLE on gen < 8 */ shader, 8, shader_time_index); if (!v.run_vs()) { if (error_str) *error_str = ralloc_strdup(mem_ctx, v.fail_msg); return NULL; } prog_data->base.base.dispatch_grf_start_reg = v.payload.num_regs; fs_generator g(compiler, log_data, mem_ctx, (void *) key, &prog_data->base.base, v.promoted_constants, v.runtime_check_aads_emit, MESA_SHADER_VERTEX); if (INTEL_DEBUG & DEBUG_VS) { const char *debug_name = ralloc_asprintf(mem_ctx, "%s vertex shader %s", shader->info.label ? shader->info.label : "unnamed", shader->info.name); g.enable_debug(debug_name); } g.generate_code(v.cfg, 8); assembly = g.get_assembly(); } if (!assembly) { prog_data->base.dispatch_mode = DISPATCH_MODE_4X2_DUAL_OBJECT; vec4_vs_visitor v(compiler, log_data, key, prog_data, shader, mem_ctx, shader_time_index); if (!v.run()) { if (error_str) *error_str = ralloc_strdup(mem_ctx, v.fail_msg); return NULL; } assembly = brw_vec4_generate_assembly(compiler, log_data, mem_ctx, shader, &prog_data->base, v.cfg); } return assembly; } } /* extern "C" */