/* * Copyright © 2012 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ #include "compiler/nir/nir_builder.h" #include "blorp_priv.h" #include "brw_meta_util.h" #define FILE_DEBUG_FLAG DEBUG_BLORP /** * Enum to specify the order of arguments in a sampler message */ enum sampler_message_arg { SAMPLER_MESSAGE_ARG_U_FLOAT, SAMPLER_MESSAGE_ARG_V_FLOAT, SAMPLER_MESSAGE_ARG_U_INT, SAMPLER_MESSAGE_ARG_V_INT, SAMPLER_MESSAGE_ARG_R_INT, SAMPLER_MESSAGE_ARG_SI_INT, SAMPLER_MESSAGE_ARG_MCS_INT, SAMPLER_MESSAGE_ARG_ZERO_INT, }; struct brw_blorp_blit_vars { /* Input values from brw_blorp_wm_inputs */ nir_variable *v_discard_rect; nir_variable *v_rect_grid; nir_variable *v_coord_transform; nir_variable *v_src_z; nir_variable *v_src_offset; nir_variable *v_dst_offset; /* gl_FragCoord */ nir_variable *frag_coord; /* gl_FragColor */ nir_variable *color_out; }; static void brw_blorp_blit_vars_init(nir_builder *b, struct brw_blorp_blit_vars *v, const struct brw_blorp_blit_prog_key *key) { /* Blended and scaled blits never use pixel discard. */ assert(!key->use_kill || !(key->blend && key->blit_scaled)); #define LOAD_INPUT(name, type)\ v->v_##name = nir_variable_create(b->shader, nir_var_shader_in, \ type, #name); \ v->v_##name->data.interpolation = INTERP_MODE_FLAT; \ v->v_##name->data.location = VARYING_SLOT_VAR0 + \ offsetof(struct brw_blorp_wm_inputs, name) / (4 * sizeof(float)); \ v->v_##name->data.location_frac = \ (offsetof(struct brw_blorp_wm_inputs, name) / sizeof(float)) % 4; LOAD_INPUT(discard_rect, glsl_vec4_type()) LOAD_INPUT(rect_grid, glsl_vec4_type()) LOAD_INPUT(coord_transform, glsl_vec4_type()) LOAD_INPUT(src_z, glsl_uint_type()) LOAD_INPUT(src_offset, glsl_vector_type(GLSL_TYPE_UINT, 2)) LOAD_INPUT(dst_offset, glsl_vector_type(GLSL_TYPE_UINT, 2)) #undef LOAD_INPUT v->frag_coord = nir_variable_create(b->shader, nir_var_shader_in, glsl_vec4_type(), "gl_FragCoord"); v->frag_coord->data.location = VARYING_SLOT_POS; v->frag_coord->data.origin_upper_left = true; v->color_out = nir_variable_create(b->shader, nir_var_shader_out, glsl_vec4_type(), "gl_FragColor"); v->color_out->data.location = FRAG_RESULT_COLOR; } static nir_ssa_def * blorp_blit_get_frag_coords(nir_builder *b, const struct brw_blorp_blit_prog_key *key, struct brw_blorp_blit_vars *v) { nir_ssa_def *coord = nir_f2i(b, nir_load_var(b, v->frag_coord)); /* Account for destination surface intratile offset * * Transformation parameters giving translation from destination to source * coordinates don't take into account possible intra-tile destination * offset. Therefore it has to be first subtracted from the incoming * coordinates. Vertices are set up based on coordinates containing the * intra-tile offset. */ if (key->need_dst_offset) coord = nir_isub(b, coord, nir_load_var(b, v->v_dst_offset)); if (key->persample_msaa_dispatch) { return nir_vec3(b, nir_channel(b, coord, 0), nir_channel(b, coord, 1), nir_load_sample_id(b)); } else { return nir_vec2(b, nir_channel(b, coord, 0), nir_channel(b, coord, 1)); } } /** * Emit code to translate from destination (X, Y) coordinates to source (X, Y) * coordinates. */ static nir_ssa_def * blorp_blit_apply_transform(nir_builder *b, nir_ssa_def *src_pos, struct brw_blorp_blit_vars *v) { nir_ssa_def *coord_transform = nir_load_var(b, v->v_coord_transform); nir_ssa_def *offset = nir_vec2(b, nir_channel(b, coord_transform, 1), nir_channel(b, coord_transform, 3)); nir_ssa_def *mul = nir_vec2(b, nir_channel(b, coord_transform, 0), nir_channel(b, coord_transform, 2)); return nir_ffma(b, src_pos, mul, offset); } static inline void blorp_nir_discard_if_outside_rect(nir_builder *b, nir_ssa_def *pos, struct brw_blorp_blit_vars *v) { nir_ssa_def *c0, *c1, *c2, *c3; nir_ssa_def *discard_rect = nir_load_var(b, v->v_discard_rect); nir_ssa_def *dst_x0 = nir_channel(b, discard_rect, 0); nir_ssa_def *dst_x1 = nir_channel(b, discard_rect, 1); nir_ssa_def *dst_y0 = nir_channel(b, discard_rect, 2); nir_ssa_def *dst_y1 = nir_channel(b, discard_rect, 3); c0 = nir_ult(b, nir_channel(b, pos, 0), dst_x0); c1 = nir_uge(b, nir_channel(b, pos, 0), dst_x1); c2 = nir_ult(b, nir_channel(b, pos, 1), dst_y0); c3 = nir_uge(b, nir_channel(b, pos, 1), dst_y1); nir_ssa_def *oob = nir_ior(b, nir_ior(b, c0, c1), nir_ior(b, c2, c3)); nir_intrinsic_instr *discard = nir_intrinsic_instr_create(b->shader, nir_intrinsic_discard_if); discard->src[0] = nir_src_for_ssa(oob); nir_builder_instr_insert(b, &discard->instr); } static nir_tex_instr * blorp_create_nir_tex_instr(nir_builder *b, struct brw_blorp_blit_vars *v, nir_texop op, nir_ssa_def *pos, unsigned num_srcs, nir_alu_type dst_type) { nir_tex_instr *tex = nir_tex_instr_create(b->shader, num_srcs); tex->op = op; tex->dest_type = dst_type; tex->is_array = false; tex->is_shadow = false; /* Blorp only has one texture and it's bound at unit 0 */ tex->texture = NULL; tex->sampler = NULL; tex->texture_index = 0; tex->sampler_index = 0; /* To properly handle 3-D and 2-D array textures, we pull the Z component * from an input. TODO: This is a bit magic; we should probably make this * more explicit in the future. */ assert(pos->num_components >= 2); pos = nir_vec3(b, nir_channel(b, pos, 0), nir_channel(b, pos, 1), nir_load_var(b, v->v_src_z)); tex->src[0].src_type = nir_tex_src_coord; tex->src[0].src = nir_src_for_ssa(pos); tex->coord_components = 3; nir_ssa_dest_init(&tex->instr, &tex->dest, 4, 32, NULL); return tex; } static nir_ssa_def * blorp_nir_tex(nir_builder *b, struct brw_blorp_blit_vars *v, nir_ssa_def *pos, nir_alu_type dst_type) { nir_tex_instr *tex = blorp_create_nir_tex_instr(b, v, nir_texop_tex, pos, 2, dst_type); assert(pos->num_components == 2); tex->sampler_dim = GLSL_SAMPLER_DIM_2D; tex->src[1].src_type = nir_tex_src_lod; tex->src[1].src = nir_src_for_ssa(nir_imm_int(b, 0)); nir_builder_instr_insert(b, &tex->instr); return &tex->dest.ssa; } static nir_ssa_def * blorp_nir_txf(nir_builder *b, struct brw_blorp_blit_vars *v, nir_ssa_def *pos, nir_alu_type dst_type) { nir_tex_instr *tex = blorp_create_nir_tex_instr(b, v, nir_texop_txf, pos, 2, dst_type); tex->sampler_dim = GLSL_SAMPLER_DIM_3D; tex->src[1].src_type = nir_tex_src_lod; tex->src[1].src = nir_src_for_ssa(nir_imm_int(b, 0)); nir_builder_instr_insert(b, &tex->instr); return &tex->dest.ssa; } static nir_ssa_def * blorp_nir_txf_ms(nir_builder *b, struct brw_blorp_blit_vars *v, nir_ssa_def *pos, nir_ssa_def *mcs, nir_alu_type dst_type) { nir_tex_instr *tex = blorp_create_nir_tex_instr(b, v, nir_texop_txf_ms, pos, mcs != NULL ? 3 : 2, dst_type); tex->sampler_dim = GLSL_SAMPLER_DIM_MS; tex->src[1].src_type = nir_tex_src_ms_index; if (pos->num_components == 2) { tex->src[1].src = nir_src_for_ssa(nir_imm_int(b, 0)); } else { assert(pos->num_components == 3); tex->src[1].src = nir_src_for_ssa(nir_channel(b, pos, 2)); } if (mcs) { tex->src[2].src_type = nir_tex_src_ms_mcs; tex->src[2].src = nir_src_for_ssa(mcs); } nir_builder_instr_insert(b, &tex->instr); return &tex->dest.ssa; } static nir_ssa_def * blorp_nir_txf_ms_mcs(nir_builder *b, struct brw_blorp_blit_vars *v, nir_ssa_def *pos) { nir_tex_instr *tex = blorp_create_nir_tex_instr(b, v, nir_texop_txf_ms_mcs, pos, 1, nir_type_int); tex->sampler_dim = GLSL_SAMPLER_DIM_MS; nir_builder_instr_insert(b, &tex->instr); return &tex->dest.ssa; } static nir_ssa_def * nir_mask_shift_or(struct nir_builder *b, nir_ssa_def *dst, nir_ssa_def *src, uint32_t src_mask, int src_left_shift) { nir_ssa_def *masked = nir_iand(b, src, nir_imm_int(b, src_mask)); nir_ssa_def *shifted; if (src_left_shift > 0) { shifted = nir_ishl(b, masked, nir_imm_int(b, src_left_shift)); } else if (src_left_shift < 0) { shifted = nir_ushr(b, masked, nir_imm_int(b, -src_left_shift)); } else { assert(src_left_shift == 0); shifted = masked; } return nir_ior(b, dst, shifted); } /** * Emit code to compensate for the difference between Y and W tiling. * * This code modifies the X and Y coordinates according to the formula: * * (X', Y', S') = detile(W-MAJOR, tile(Y-MAJOR, X, Y, S)) * * (See brw_blorp_build_nir_shader). */ static inline nir_ssa_def * blorp_nir_retile_y_to_w(nir_builder *b, nir_ssa_def *pos) { assert(pos->num_components == 2); nir_ssa_def *x_Y = nir_channel(b, pos, 0); nir_ssa_def *y_Y = nir_channel(b, pos, 1); /* Given X and Y coordinates that describe an address using Y tiling, * translate to the X and Y coordinates that describe the same address * using W tiling. * * If we break down the low order bits of X and Y, using a * single letter to represent each low-order bit: * * X = A << 7 | 0bBCDEFGH * Y = J << 5 | 0bKLMNP (1) * * Then we can apply the Y tiling formula to see the memory offset being * addressed: * * offset = (J * tile_pitch + A) << 12 | 0bBCDKLMNPEFGH (2) * * If we apply the W detiling formula to this memory location, that the * corresponding X' and Y' coordinates are: * * X' = A << 6 | 0bBCDPFH (3) * Y' = J << 6 | 0bKLMNEG * * Combining (1) and (3), we see that to transform (X, Y) to (X', Y'), * we need to make the following computation: * * X' = (X & ~0b1011) >> 1 | (Y & 0b1) << 2 | X & 0b1 (4) * Y' = (Y & ~0b1) << 1 | (X & 0b1000) >> 2 | (X & 0b10) >> 1 */ nir_ssa_def *x_W = nir_imm_int(b, 0); x_W = nir_mask_shift_or(b, x_W, x_Y, 0xfffffff4, -1); x_W = nir_mask_shift_or(b, x_W, y_Y, 0x1, 2); x_W = nir_mask_shift_or(b, x_W, x_Y, 0x1, 0); nir_ssa_def *y_W = nir_imm_int(b, 0); y_W = nir_mask_shift_or(b, y_W, y_Y, 0xfffffffe, 1); y_W = nir_mask_shift_or(b, y_W, x_Y, 0x8, -2); y_W = nir_mask_shift_or(b, y_W, x_Y, 0x2, -1); return nir_vec2(b, x_W, y_W); } /** * Emit code to compensate for the difference between Y and W tiling. * * This code modifies the X and Y coordinates according to the formula: * * (X', Y', S') = detile(Y-MAJOR, tile(W-MAJOR, X, Y, S)) * * (See brw_blorp_build_nir_shader). */ static inline nir_ssa_def * blorp_nir_retile_w_to_y(nir_builder *b, nir_ssa_def *pos) { assert(pos->num_components == 2); nir_ssa_def *x_W = nir_channel(b, pos, 0); nir_ssa_def *y_W = nir_channel(b, pos, 1); /* Applying the same logic as above, but in reverse, we obtain the * formulas: * * X' = (X & ~0b101) << 1 | (Y & 0b10) << 2 | (Y & 0b1) << 1 | X & 0b1 * Y' = (Y & ~0b11) >> 1 | (X & 0b100) >> 2 */ nir_ssa_def *x_Y = nir_imm_int(b, 0); x_Y = nir_mask_shift_or(b, x_Y, x_W, 0xfffffffa, 1); x_Y = nir_mask_shift_or(b, x_Y, y_W, 0x2, 2); x_Y = nir_mask_shift_or(b, x_Y, y_W, 0x1, 1); x_Y = nir_mask_shift_or(b, x_Y, x_W, 0x1, 0); nir_ssa_def *y_Y = nir_imm_int(b, 0); y_Y = nir_mask_shift_or(b, y_Y, y_W, 0xfffffffc, -1); y_Y = nir_mask_shift_or(b, y_Y, x_W, 0x4, -2); return nir_vec2(b, x_Y, y_Y); } /** * Emit code to compensate for the difference between MSAA and non-MSAA * surfaces. * * This code modifies the X and Y coordinates according to the formula: * * (X', Y', S') = encode_msaa(num_samples, IMS, X, Y, S) * * (See brw_blorp_blit_program). */ static inline nir_ssa_def * blorp_nir_encode_msaa(nir_builder *b, nir_ssa_def *pos, unsigned num_samples, enum isl_msaa_layout layout) { assert(pos->num_components == 2 || pos->num_components == 3); switch (layout) { case ISL_MSAA_LAYOUT_NONE: assert(pos->num_components == 2); return pos; case ISL_MSAA_LAYOUT_ARRAY: /* No translation needed */ return pos; case ISL_MSAA_LAYOUT_INTERLEAVED: { nir_ssa_def *x_in = nir_channel(b, pos, 0); nir_ssa_def *y_in = nir_channel(b, pos, 1); nir_ssa_def *s_in = pos->num_components == 2 ? nir_imm_int(b, 0) : nir_channel(b, pos, 2); nir_ssa_def *x_out = nir_imm_int(b, 0); nir_ssa_def *y_out = nir_imm_int(b, 0); switch (num_samples) { case 2: case 4: /* encode_msaa(2, IMS, X, Y, S) = (X', Y', 0) * where X' = (X & ~0b1) << 1 | (S & 0b1) << 1 | (X & 0b1) * Y' = Y * * encode_msaa(4, IMS, X, Y, S) = (X', Y', 0) * where X' = (X & ~0b1) << 1 | (S & 0b1) << 1 | (X & 0b1) * Y' = (Y & ~0b1) << 1 | (S & 0b10) | (Y & 0b1) */ x_out = nir_mask_shift_or(b, x_out, x_in, 0xfffffffe, 1); x_out = nir_mask_shift_or(b, x_out, s_in, 0x1, 1); x_out = nir_mask_shift_or(b, x_out, x_in, 0x1, 0); if (num_samples == 2) { y_out = y_in; } else { y_out = nir_mask_shift_or(b, y_out, y_in, 0xfffffffe, 1); y_out = nir_mask_shift_or(b, y_out, s_in, 0x2, 0); y_out = nir_mask_shift_or(b, y_out, y_in, 0x1, 0); } break; case 8: /* encode_msaa(8, IMS, X, Y, S) = (X', Y', 0) * where X' = (X & ~0b1) << 2 | (S & 0b100) | (S & 0b1) << 1 * | (X & 0b1) * Y' = (Y & ~0b1) << 1 | (S & 0b10) | (Y & 0b1) */ x_out = nir_mask_shift_or(b, x_out, x_in, 0xfffffffe, 2); x_out = nir_mask_shift_or(b, x_out, s_in, 0x4, 0); x_out = nir_mask_shift_or(b, x_out, s_in, 0x1, 1); x_out = nir_mask_shift_or(b, x_out, x_in, 0x1, 0); y_out = nir_mask_shift_or(b, y_out, y_in, 0xfffffffe, 1); y_out = nir_mask_shift_or(b, y_out, s_in, 0x2, 0); y_out = nir_mask_shift_or(b, y_out, y_in, 0x1, 0); break; case 16: /* encode_msaa(16, IMS, X, Y, S) = (X', Y', 0) * where X' = (X & ~0b1) << 2 | (S & 0b100) | (S & 0b1) << 1 * | (X & 0b1) * Y' = (Y & ~0b1) << 2 | (S & 0b1000) >> 1 (S & 0b10) * | (Y & 0b1) */ x_out = nir_mask_shift_or(b, x_out, x_in, 0xfffffffe, 2); x_out = nir_mask_shift_or(b, x_out, s_in, 0x4, 0); x_out = nir_mask_shift_or(b, x_out, s_in, 0x1, 1); x_out = nir_mask_shift_or(b, x_out, x_in, 0x1, 0); y_out = nir_mask_shift_or(b, y_out, y_in, 0xfffffffe, 2); y_out = nir_mask_shift_or(b, y_out, s_in, 0x8, -1); y_out = nir_mask_shift_or(b, y_out, s_in, 0x2, 0); y_out = nir_mask_shift_or(b, y_out, y_in, 0x1, 0); break; default: unreachable("Invalid number of samples for IMS layout"); } return nir_vec2(b, x_out, y_out); } default: unreachable("Invalid MSAA layout"); } } /** * Emit code to compensate for the difference between MSAA and non-MSAA * surfaces. * * This code modifies the X and Y coordinates according to the formula: * * (X', Y', S) = decode_msaa(num_samples, IMS, X, Y, S) * * (See brw_blorp_blit_program). */ static inline nir_ssa_def * blorp_nir_decode_msaa(nir_builder *b, nir_ssa_def *pos, unsigned num_samples, enum isl_msaa_layout layout) { assert(pos->num_components == 2 || pos->num_components == 3); switch (layout) { case ISL_MSAA_LAYOUT_NONE: /* No translation necessary, and S should already be zero. */ assert(pos->num_components == 2); return pos; case ISL_MSAA_LAYOUT_ARRAY: /* No translation necessary. */ return pos; case ISL_MSAA_LAYOUT_INTERLEAVED: { assert(pos->num_components == 2); nir_ssa_def *x_in = nir_channel(b, pos, 0); nir_ssa_def *y_in = nir_channel(b, pos, 1); nir_ssa_def *x_out = nir_imm_int(b, 0); nir_ssa_def *y_out = nir_imm_int(b, 0); nir_ssa_def *s_out = nir_imm_int(b, 0); switch (num_samples) { case 2: case 4: /* decode_msaa(2, IMS, X, Y, 0) = (X', Y', S) * where X' = (X & ~0b11) >> 1 | (X & 0b1) * S = (X & 0b10) >> 1 * * decode_msaa(4, IMS, X, Y, 0) = (X', Y', S) * where X' = (X & ~0b11) >> 1 | (X & 0b1) * Y' = (Y & ~0b11) >> 1 | (Y & 0b1) * S = (Y & 0b10) | (X & 0b10) >> 1 */ x_out = nir_mask_shift_or(b, x_out, x_in, 0xfffffffc, -1); x_out = nir_mask_shift_or(b, x_out, x_in, 0x1, 0); if (num_samples == 2) { y_out = y_in; s_out = nir_mask_shift_or(b, s_out, x_in, 0x2, -1); } else { y_out = nir_mask_shift_or(b, y_out, y_in, 0xfffffffc, -1); y_out = nir_mask_shift_or(b, y_out, y_in, 0x1, 0); s_out = nir_mask_shift_or(b, s_out, x_in, 0x2, -1); s_out = nir_mask_shift_or(b, s_out, y_in, 0x2, 0); } break; case 8: /* decode_msaa(8, IMS, X, Y, 0) = (X', Y', S) * where X' = (X & ~0b111) >> 2 | (X & 0b1) * Y' = (Y & ~0b11) >> 1 | (Y & 0b1) * S = (X & 0b100) | (Y & 0b10) | (X & 0b10) >> 1 */ x_out = nir_mask_shift_or(b, x_out, x_in, 0xfffffff8, -2); x_out = nir_mask_shift_or(b, x_out, x_in, 0x1, 0); y_out = nir_mask_shift_or(b, y_out, y_in, 0xfffffffc, -1); y_out = nir_mask_shift_or(b, y_out, y_in, 0x1, 0); s_out = nir_mask_shift_or(b, s_out, x_in, 0x4, 0); s_out = nir_mask_shift_or(b, s_out, y_in, 0x2, 0); s_out = nir_mask_shift_or(b, s_out, x_in, 0x2, -1); break; case 16: /* decode_msaa(16, IMS, X, Y, 0) = (X', Y', S) * where X' = (X & ~0b111) >> 2 | (X & 0b1) * Y' = (Y & ~0b111) >> 2 | (Y & 0b1) * S = (Y & 0b100) << 1 | (X & 0b100) | * (Y & 0b10) | (X & 0b10) >> 1 */ x_out = nir_mask_shift_or(b, x_out, x_in, 0xfffffff8, -2); x_out = nir_mask_shift_or(b, x_out, x_in, 0x1, 0); y_out = nir_mask_shift_or(b, y_out, y_in, 0xfffffff8, -2); y_out = nir_mask_shift_or(b, y_out, y_in, 0x1, 0); s_out = nir_mask_shift_or(b, s_out, y_in, 0x4, 1); s_out = nir_mask_shift_or(b, s_out, x_in, 0x4, 0); s_out = nir_mask_shift_or(b, s_out, y_in, 0x2, 0); s_out = nir_mask_shift_or(b, s_out, x_in, 0x2, -1); break; default: unreachable("Invalid number of samples for IMS layout"); } return nir_vec3(b, x_out, y_out, s_out); } default: unreachable("Invalid MSAA layout"); } } /** * Count the number of trailing 1 bits in the given value. For example: * * count_trailing_one_bits(0) == 0 * count_trailing_one_bits(7) == 3 * count_trailing_one_bits(11) == 2 */ static inline int count_trailing_one_bits(unsigned value) { #ifdef HAVE___BUILTIN_CTZ return __builtin_ctz(~value); #else return _mesa_bitcount(value & ~(value + 1)); #endif } static nir_ssa_def * blorp_nir_manual_blend_average(nir_builder *b, struct brw_blorp_blit_vars *v, nir_ssa_def *pos, unsigned tex_samples, enum isl_aux_usage tex_aux_usage, nir_alu_type dst_type) { /* If non-null, this is the outer-most if statement */ nir_if *outer_if = NULL; nir_variable *color = nir_local_variable_create(b->impl, glsl_vec4_type(), "color"); nir_ssa_def *mcs = NULL; if (tex_aux_usage == ISL_AUX_USAGE_MCS) mcs = blorp_nir_txf_ms_mcs(b, v, pos); /* We add together samples using a binary tree structure, e.g. for 4x MSAA: * * result = ((sample[0] + sample[1]) + (sample[2] + sample[3])) / 4 * * This ensures that when all samples have the same value, no numerical * precision is lost, since each addition operation always adds two equal * values, and summing two equal floating point values does not lose * precision. * * We perform this computation by treating the texture_data array as a * stack and performing the following operations: * * - push sample 0 onto stack * - push sample 1 onto stack * - add top two stack entries * - push sample 2 onto stack * - push sample 3 onto stack * - add top two stack entries * - add top two stack entries * - divide top stack entry by 4 * * Note that after pushing sample i onto the stack, the number of add * operations we do is equal to the number of trailing 1 bits in i. This * works provided the total number of samples is a power of two, which it * always is for i965. * * For integer formats, we replace the add operations with average * operations and skip the final division. */ nir_ssa_def *texture_data[5]; unsigned stack_depth = 0; for (unsigned i = 0; i < tex_samples; ++i) { assert(stack_depth == _mesa_bitcount(i)); /* Loop invariant */ /* Push sample i onto the stack */ assert(stack_depth < ARRAY_SIZE(texture_data)); nir_ssa_def *ms_pos = nir_vec3(b, nir_channel(b, pos, 0), nir_channel(b, pos, 1), nir_imm_int(b, i)); texture_data[stack_depth++] = blorp_nir_txf_ms(b, v, ms_pos, mcs, dst_type); if (i == 0 && tex_aux_usage == ISL_AUX_USAGE_MCS) { /* The Ivy Bridge PRM, Vol4 Part1 p27 (Multisample Control Surface) * suggests an optimization: * * "A simple optimization with probable large return in * performance is to compare the MCS value to zero (indicating * all samples are on sample slice 0), and sample only from * sample slice 0 using ld2dss if MCS is zero." * * Note that in the case where the MCS value is zero, sampling from * sample slice 0 using ld2dss and sampling from sample 0 using * ld2dms are equivalent (since all samples are on sample slice 0). * Since we have already sampled from sample 0, all we need to do is * skip the remaining fetches and averaging if MCS is zero. */ nir_ssa_def *mcs_zero = nir_ieq(b, nir_channel(b, mcs, 0), nir_imm_int(b, 0)); if (tex_samples == 16) { mcs_zero = nir_iand(b, mcs_zero, nir_ieq(b, nir_channel(b, mcs, 1), nir_imm_int(b, 0))); } nir_if *if_stmt = nir_if_create(b->shader); if_stmt->condition = nir_src_for_ssa(mcs_zero); nir_cf_node_insert(b->cursor, &if_stmt->cf_node); b->cursor = nir_after_cf_list(&if_stmt->then_list); nir_store_var(b, color, texture_data[0], 0xf); b->cursor = nir_after_cf_list(&if_stmt->else_list); outer_if = if_stmt; } for (int j = 0; j < count_trailing_one_bits(i); j++) { assert(stack_depth >= 2); --stack_depth; assert(dst_type == nir_type_float); texture_data[stack_depth - 1] = nir_fadd(b, texture_data[stack_depth - 1], texture_data[stack_depth]); } } /* We should have just 1 sample on the stack now. */ assert(stack_depth == 1); texture_data[0] = nir_fmul(b, texture_data[0], nir_imm_float(b, 1.0 / tex_samples)); nir_store_var(b, color, texture_data[0], 0xf); if (outer_if) b->cursor = nir_after_cf_node(&outer_if->cf_node); return nir_load_var(b, color); } static inline nir_ssa_def * nir_imm_vec2(nir_builder *build, float x, float y) { nir_const_value v; memset(&v, 0, sizeof(v)); v.f32[0] = x; v.f32[1] = y; return nir_build_imm(build, 4, 32, v); } static nir_ssa_def * blorp_nir_manual_blend_bilinear(nir_builder *b, nir_ssa_def *pos, unsigned tex_samples, const struct brw_blorp_blit_prog_key *key, struct brw_blorp_blit_vars *v) { nir_ssa_def *pos_xy = nir_channels(b, pos, 0x3); nir_ssa_def *rect_grid = nir_load_var(b, v->v_rect_grid); nir_ssa_def *scale = nir_imm_vec2(b, key->x_scale, key->y_scale); /* Translate coordinates to lay out the samples in a rectangular grid * roughly corresponding to sample locations. */ pos_xy = nir_fmul(b, pos_xy, scale); /* Adjust coordinates so that integers represent pixel centers rather * than pixel edges. */ pos_xy = nir_fadd(b, pos_xy, nir_imm_float(b, -0.5)); /* Clamp the X, Y texture coordinates to properly handle the sampling of * texels on texture edges. */ pos_xy = nir_fmin(b, nir_fmax(b, pos_xy, nir_imm_float(b, 0.0)), nir_vec2(b, nir_channel(b, rect_grid, 0), nir_channel(b, rect_grid, 1))); /* Store the fractional parts to be used as bilinear interpolation * coefficients. */ nir_ssa_def *frac_xy = nir_ffract(b, pos_xy); /* Round the float coordinates down to nearest integer */ pos_xy = nir_fdiv(b, nir_ftrunc(b, pos_xy), scale); nir_ssa_def *tex_data[4]; for (unsigned i = 0; i < 4; ++i) { float sample_off_x = (float)(i & 0x1) / key->x_scale; float sample_off_y = (float)((i >> 1) & 0x1) / key->y_scale; nir_ssa_def *sample_off = nir_imm_vec2(b, sample_off_x, sample_off_y); nir_ssa_def *sample_coords = nir_fadd(b, pos_xy, sample_off); nir_ssa_def *sample_coords_int = nir_f2i(b, sample_coords); /* The MCS value we fetch has to match up with the pixel that we're * sampling from. Since we sample from different pixels in each * iteration of this "for" loop, the call to mcs_fetch() should be * here inside the loop after computing the pixel coordinates. */ nir_ssa_def *mcs = NULL; if (key->tex_aux_usage == ISL_AUX_USAGE_MCS) mcs = blorp_nir_txf_ms_mcs(b, v, sample_coords_int); /* Compute sample index and map the sample index to a sample number. * Sample index layout shows the numbering of slots in a rectangular * grid of samples with in a pixel. Sample number layout shows the * rectangular grid of samples roughly corresponding to the real sample * locations with in a pixel. * In case of 4x MSAA, layout of sample indices matches the layout of * sample numbers: * --------- * | 0 | 1 | * --------- * | 2 | 3 | * --------- * * In case of 8x MSAA the two layouts don't match. * sample index layout : --------- sample number layout : --------- * | 0 | 1 | | 3 | 7 | * --------- --------- * | 2 | 3 | | 5 | 0 | * --------- --------- * | 4 | 5 | | 1 | 2 | * --------- --------- * | 6 | 7 | | 4 | 6 | * --------- --------- * * Fortunately, this can be done fairly easily as: * S' = (0x17306425 >> (S * 4)) & 0xf * * In the case of 16x MSAA the two layouts don't match. * Sample index layout: Sample number layout: * --------------------- --------------------- * | 0 | 1 | 2 | 3 | | 15 | 10 | 9 | 7 | * --------------------- --------------------- * | 4 | 5 | 6 | 7 | | 4 | 1 | 3 | 13 | * --------------------- --------------------- * | 8 | 9 | 10 | 11 | | 12 | 2 | 0 | 6 | * --------------------- --------------------- * | 12 | 13 | 14 | 15 | | 11 | 8 | 5 | 14 | * --------------------- --------------------- * * This is equivalent to * S' = (0xe58b602cd31479af >> (S * 4)) & 0xf */ nir_ssa_def *frac = nir_ffract(b, sample_coords); nir_ssa_def *sample = nir_fdot2(b, frac, nir_imm_vec2(b, key->x_scale, key->x_scale * key->y_scale)); sample = nir_f2i(b, sample); if (tex_samples == 8) { sample = nir_iand(b, nir_ishr(b, nir_imm_int(b, 0x64210573), nir_ishl(b, sample, nir_imm_int(b, 2))), nir_imm_int(b, 0xf)); } else if (tex_samples == 16) { nir_ssa_def *sample_low = nir_iand(b, nir_ishr(b, nir_imm_int(b, 0xd31479af), nir_ishl(b, sample, nir_imm_int(b, 2))), nir_imm_int(b, 0xf)); nir_ssa_def *sample_high = nir_iand(b, nir_ishr(b, nir_imm_int(b, 0xe58b602c), nir_ishl(b, nir_iadd(b, sample, nir_imm_int(b, -8)), nir_imm_int(b, 2))), nir_imm_int(b, 0xf)); sample = nir_bcsel(b, nir_ilt(b, sample, nir_imm_int(b, 8)), sample_low, sample_high); } nir_ssa_def *pos_ms = nir_vec3(b, nir_channel(b, sample_coords_int, 0), nir_channel(b, sample_coords_int, 1), sample); tex_data[i] = blorp_nir_txf_ms(b, v, pos_ms, mcs, key->texture_data_type); } nir_ssa_def *frac_x = nir_channel(b, frac_xy, 0); nir_ssa_def *frac_y = nir_channel(b, frac_xy, 1); return nir_flrp(b, nir_flrp(b, tex_data[0], tex_data[1], frac_x), nir_flrp(b, tex_data[2], tex_data[3], frac_x), frac_y); } /** * Generator for WM programs used in BLORP blits. * * The bulk of the work done by the WM program is to wrap and unwrap the * coordinate transformations used by the hardware to store surfaces in * memory. The hardware transforms a pixel location (X, Y, S) (where S is the * sample index for a multisampled surface) to a memory offset by the * following formulas: * * offset = tile(tiling_format, encode_msaa(num_samples, layout, X, Y, S)) * (X, Y, S) = decode_msaa(num_samples, layout, detile(tiling_format, offset)) * * For a single-sampled surface, or for a multisampled surface using * INTEL_MSAA_LAYOUT_UMS, encode_msaa() and decode_msaa are the identity * function: * * encode_msaa(1, NONE, X, Y, 0) = (X, Y, 0) * decode_msaa(1, NONE, X, Y, 0) = (X, Y, 0) * encode_msaa(n, UMS, X, Y, S) = (X, Y, S) * decode_msaa(n, UMS, X, Y, S) = (X, Y, S) * * For a 4x multisampled surface using INTEL_MSAA_LAYOUT_IMS, encode_msaa() * embeds the sample number into bit 1 of the X and Y coordinates: * * encode_msaa(4, IMS, X, Y, S) = (X', Y', 0) * where X' = (X & ~0b1) << 1 | (S & 0b1) << 1 | (X & 0b1) * Y' = (Y & ~0b1 ) << 1 | (S & 0b10) | (Y & 0b1) * decode_msaa(4, IMS, X, Y, 0) = (X', Y', S) * where X' = (X & ~0b11) >> 1 | (X & 0b1) * Y' = (Y & ~0b11) >> 1 | (Y & 0b1) * S = (Y & 0b10) | (X & 0b10) >> 1 * * For an 8x multisampled surface using INTEL_MSAA_LAYOUT_IMS, encode_msaa() * embeds the sample number into bits 1 and 2 of the X coordinate and bit 1 of * the Y coordinate: * * encode_msaa(8, IMS, X, Y, S) = (X', Y', 0) * where X' = (X & ~0b1) << 2 | (S & 0b100) | (S & 0b1) << 1 | (X & 0b1) * Y' = (Y & ~0b1) << 1 | (S & 0b10) | (Y & 0b1) * decode_msaa(8, IMS, X, Y, 0) = (X', Y', S) * where X' = (X & ~0b111) >> 2 | (X & 0b1) * Y' = (Y & ~0b11) >> 1 | (Y & 0b1) * S = (X & 0b100) | (Y & 0b10) | (X & 0b10) >> 1 * * For X tiling, tile() combines together the low-order bits of the X and Y * coordinates in the pattern 0byyyxxxxxxxxx, creating 4k tiles that are 512 * bytes wide and 8 rows high: * * tile(x_tiled, X, Y, S) = A * where A = tile_num << 12 | offset * tile_num = (Y' >> 3) * tile_pitch + (X' >> 9) * offset = (Y' & 0b111) << 9 * | (X & 0b111111111) * X' = X * cpp * Y' = Y + S * qpitch * detile(x_tiled, A) = (X, Y, S) * where X = X' / cpp * Y = Y' % qpitch * S = Y' / qpitch * Y' = (tile_num / tile_pitch) << 3 * | (A & 0b111000000000) >> 9 * X' = (tile_num % tile_pitch) << 9 * | (A & 0b111111111) * * (In all tiling formulas, cpp is the number of bytes occupied by a single * sample ("chars per pixel"), tile_pitch is the number of 4k tiles required * to fill the width of the surface, and qpitch is the spacing (in rows) * between array slices). * * For Y tiling, tile() combines together the low-order bits of the X and Y * coordinates in the pattern 0bxxxyyyyyxxxx, creating 4k tiles that are 128 * bytes wide and 32 rows high: * * tile(y_tiled, X, Y, S) = A * where A = tile_num << 12 | offset * tile_num = (Y' >> 5) * tile_pitch + (X' >> 7) * offset = (X' & 0b1110000) << 5 * | (Y' & 0b11111) << 4 * | (X' & 0b1111) * X' = X * cpp * Y' = Y + S * qpitch * detile(y_tiled, A) = (X, Y, S) * where X = X' / cpp * Y = Y' % qpitch * S = Y' / qpitch * Y' = (tile_num / tile_pitch) << 5 * | (A & 0b111110000) >> 4 * X' = (tile_num % tile_pitch) << 7 * | (A & 0b111000000000) >> 5 * | (A & 0b1111) * * For W tiling, tile() combines together the low-order bits of the X and Y * coordinates in the pattern 0bxxxyyyyxyxyx, creating 4k tiles that are 64 * bytes wide and 64 rows high (note that W tiling is only used for stencil * buffers, which always have cpp = 1 and S=0): * * tile(w_tiled, X, Y, S) = A * where A = tile_num << 12 | offset * tile_num = (Y' >> 6) * tile_pitch + (X' >> 6) * offset = (X' & 0b111000) << 6 * | (Y' & 0b111100) << 3 * | (X' & 0b100) << 2 * | (Y' & 0b10) << 2 * | (X' & 0b10) << 1 * | (Y' & 0b1) << 1 * | (X' & 0b1) * X' = X * cpp = X * Y' = Y + S * qpitch * detile(w_tiled, A) = (X, Y, S) * where X = X' / cpp = X' * Y = Y' % qpitch = Y' * S = Y / qpitch = 0 * Y' = (tile_num / tile_pitch) << 6 * | (A & 0b111100000) >> 3 * | (A & 0b1000) >> 2 * | (A & 0b10) >> 1 * X' = (tile_num % tile_pitch) << 6 * | (A & 0b111000000000) >> 6 * | (A & 0b10000) >> 2 * | (A & 0b100) >> 1 * | (A & 0b1) * * Finally, for a non-tiled surface, tile() simply combines together the X and * Y coordinates in the natural way: * * tile(untiled, X, Y, S) = A * where A = Y * pitch + X' * X' = X * cpp * Y' = Y + S * qpitch * detile(untiled, A) = (X, Y, S) * where X = X' / cpp * Y = Y' % qpitch * S = Y' / qpitch * X' = A % pitch * Y' = A / pitch * * (In these formulas, pitch is the number of bytes occupied by a single row * of samples). */ static nir_shader * brw_blorp_build_nir_shader(struct blorp_context *blorp, void *mem_ctx, const struct brw_blorp_blit_prog_key *key) { const struct gen_device_info *devinfo = blorp->isl_dev->info; nir_ssa_def *src_pos, *dst_pos, *color; /* Sanity checks */ if (key->dst_tiled_w && key->rt_samples > 1) { /* If the destination image is W tiled and multisampled, then the thread * must be dispatched once per sample, not once per pixel. This is * necessary because after conversion between W and Y tiling, there's no * guarantee that all samples corresponding to a single pixel will still * be together. */ assert(key->persample_msaa_dispatch); } if (key->blend) { /* We are blending, which means we won't have an opportunity to * translate the tiling and sample count for the texture surface. So * the surface state for the texture must be configured with the correct * tiling and sample count. */ assert(!key->src_tiled_w); assert(key->tex_samples == key->src_samples); assert(key->tex_layout == key->src_layout); assert(key->tex_samples > 0); } if (key->persample_msaa_dispatch) { /* It only makes sense to do persample dispatch if the render target is * configured as multisampled. */ assert(key->rt_samples > 0); } /* Make sure layout is consistent with sample count */ assert((key->tex_layout == ISL_MSAA_LAYOUT_NONE) == (key->tex_samples <= 1)); assert((key->rt_layout == ISL_MSAA_LAYOUT_NONE) == (key->rt_samples <= 1)); assert((key->src_layout == ISL_MSAA_LAYOUT_NONE) == (key->src_samples <= 1)); assert((key->dst_layout == ISL_MSAA_LAYOUT_NONE) == (key->dst_samples <= 1)); nir_builder b; nir_builder_init_simple_shader(&b, mem_ctx, MESA_SHADER_FRAGMENT, NULL); struct brw_blorp_blit_vars v; brw_blorp_blit_vars_init(&b, &v, key); dst_pos = blorp_blit_get_frag_coords(&b, key, &v); /* Render target and texture hardware don't support W tiling until Gen8. */ const bool rt_tiled_w = false; const bool tex_tiled_w = devinfo->gen >= 8 && key->src_tiled_w; /* The address that data will be written to is determined by the * coordinates supplied to the WM thread and the tiling and sample count of * the render target, according to the formula: * * (X, Y, S) = decode_msaa(rt_samples, detile(rt_tiling, offset)) * * If the actual tiling and sample count of the destination surface are not * the same as the configuration of the render target, then these * coordinates are wrong and we have to adjust them to compensate for the * difference. */ if (rt_tiled_w != key->dst_tiled_w || key->rt_samples != key->dst_samples || key->rt_layout != key->dst_layout) { dst_pos = blorp_nir_encode_msaa(&b, dst_pos, key->rt_samples, key->rt_layout); /* Now (X, Y, S) = detile(rt_tiling, offset) */ if (rt_tiled_w != key->dst_tiled_w) dst_pos = blorp_nir_retile_y_to_w(&b, dst_pos); /* Now (X, Y, S) = detile(rt_tiling, offset) */ dst_pos = blorp_nir_decode_msaa(&b, dst_pos, key->dst_samples, key->dst_layout); } /* Now (X, Y, S) = decode_msaa(dst_samples, detile(dst_tiling, offset)). * * That is: X, Y and S now contain the true coordinates and sample index of * the data that the WM thread should output. * * If we need to kill pixels that are outside the destination rectangle, * now is the time to do it. */ if (key->use_kill) { assert(!(key->blend && key->blit_scaled)); blorp_nir_discard_if_outside_rect(&b, dst_pos, &v); } src_pos = blorp_blit_apply_transform(&b, nir_i2f(&b, dst_pos), &v); if (dst_pos->num_components == 3) { /* The sample coordinate is an integer that we want left alone but * blorp_blit_apply_transform() blindly applies the transform to all * three coordinates. Grab the original sample index. */ src_pos = nir_vec3(&b, nir_channel(&b, src_pos, 0), nir_channel(&b, src_pos, 1), nir_channel(&b, dst_pos, 2)); } /* If the source image is not multisampled, then we want to fetch sample * number 0, because that's the only sample there is. */ if (key->src_samples == 1) src_pos = nir_channels(&b, src_pos, 0x3); /* X, Y, and S are now the coordinates of the pixel in the source image * that we want to texture from. Exception: if we are blending, then S is * irrelevant, because we are going to fetch all samples. */ if (key->blend && !key->blit_scaled) { /* Resolves (effecively) use texelFetch, so we need integers and we * don't care about the sample index if we got one. */ src_pos = nir_f2i(&b, nir_channels(&b, src_pos, 0x3)); if (devinfo->gen == 6) { /* Because gen6 only supports 4x interleved MSAA, we can do all the * blending we need with a single linear-interpolated texture lookup * at the center of the sample. The texture coordinates to be odd * integers so that they correspond to the center of a 2x2 block * representing the four samples that maxe up a pixel. So we need * to multiply our X and Y coordinates each by 2 and then add 1. */ src_pos = nir_ishl(&b, src_pos, nir_imm_int(&b, 1)); src_pos = nir_iadd(&b, src_pos, nir_imm_int(&b, 1)); src_pos = nir_i2f(&b, src_pos); color = blorp_nir_tex(&b, &v, src_pos, key->texture_data_type); } else { /* Gen7+ hardware doesn't automaticaly blend. */ color = blorp_nir_manual_blend_average(&b, &v, src_pos, key->src_samples, key->tex_aux_usage, key->texture_data_type); } } else if (key->blend && key->blit_scaled) { assert(!key->use_kill); color = blorp_nir_manual_blend_bilinear(&b, src_pos, key->src_samples, key, &v); } else { if (key->bilinear_filter) { color = blorp_nir_tex(&b, &v, src_pos, key->texture_data_type); } else { /* We're going to use texelFetch, so we need integers */ if (src_pos->num_components == 2) { src_pos = nir_f2i(&b, src_pos); } else { assert(src_pos->num_components == 3); src_pos = nir_vec3(&b, nir_channel(&b, nir_f2i(&b, src_pos), 0), nir_channel(&b, nir_f2i(&b, src_pos), 1), nir_channel(&b, src_pos, 2)); } /* We aren't blending, which means we just want to fetch a single * sample from the source surface. The address that we want to fetch * from is related to the X, Y and S values according to the formula: * * (X, Y, S) = decode_msaa(src_samples, detile(src_tiling, offset)). * * If the actual tiling and sample count of the source surface are * not the same as the configuration of the texture, then we need to * adjust the coordinates to compensate for the difference. */ if (tex_tiled_w != key->src_tiled_w || key->tex_samples != key->src_samples || key->tex_layout != key->src_layout) { src_pos = blorp_nir_encode_msaa(&b, src_pos, key->src_samples, key->src_layout); /* Now (X, Y, S) = detile(src_tiling, offset) */ if (tex_tiled_w != key->src_tiled_w) src_pos = blorp_nir_retile_w_to_y(&b, src_pos); /* Now (X, Y, S) = detile(tex_tiling, offset) */ src_pos = blorp_nir_decode_msaa(&b, src_pos, key->tex_samples, key->tex_layout); } if (key->need_src_offset) src_pos = nir_iadd(&b, src_pos, nir_load_var(&b, v.v_src_offset)); /* Now (X, Y, S) = decode_msaa(tex_samples, detile(tex_tiling, offset)). * * In other words: X, Y, and S now contain values which, when passed to * the texturing unit, will cause data to be read from the correct * memory location. So we can fetch the texel now. */ if (key->src_samples == 1) { color = blorp_nir_txf(&b, &v, src_pos, key->texture_data_type); } else { nir_ssa_def *mcs = NULL; if (key->tex_aux_usage == ISL_AUX_USAGE_MCS) mcs = blorp_nir_txf_ms_mcs(&b, &v, src_pos); color = blorp_nir_txf_ms(&b, &v, src_pos, mcs, key->texture_data_type); } } } if (key->dst_rgb) { /* The destination image is bound as a red texture three times as wide * as the actual image. Our shader is effectively running one color * component at a time. We need to pick off the appropriate component * from the source color and write that to destination red. */ assert(dst_pos->num_components == 2); nir_ssa_def *comp = nir_umod(&b, nir_channel(&b, dst_pos, 0), nir_imm_int(&b, 3)); nir_ssa_def *color_component = nir_bcsel(&b, nir_ieq(&b, comp, nir_imm_int(&b, 0)), nir_channel(&b, color, 0), nir_bcsel(&b, nir_ieq(&b, comp, nir_imm_int(&b, 1)), nir_channel(&b, color, 1), nir_channel(&b, color, 2))); nir_ssa_def *u = nir_ssa_undef(&b, 1, 32); color = nir_vec4(&b, color_component, u, u, u); } nir_store_var(&b, v.color_out, color, 0xf); return b.shader; } static void brw_blorp_get_blit_kernel(struct blorp_context *blorp, struct blorp_params *params, const struct brw_blorp_blit_prog_key *prog_key) { if (blorp->lookup_shader(blorp, prog_key, sizeof(*prog_key), ¶ms->wm_prog_kernel, ¶ms->wm_prog_data)) return; void *mem_ctx = ralloc_context(NULL); const unsigned *program; unsigned program_size; struct brw_wm_prog_data prog_data; nir_shader *nir = brw_blorp_build_nir_shader(blorp, mem_ctx, prog_key); struct brw_wm_prog_key wm_key; brw_blorp_init_wm_prog_key(&wm_key); wm_key.tex.compressed_multisample_layout_mask = prog_key->tex_aux_usage == ISL_AUX_USAGE_MCS; wm_key.tex.msaa_16 = prog_key->tex_samples == 16; wm_key.multisample_fbo = prog_key->rt_samples > 1; program = blorp_compile_fs(blorp, mem_ctx, nir, &wm_key, false, &prog_data, &program_size); blorp->upload_shader(blorp, prog_key, sizeof(*prog_key), program, program_size, &prog_data.base, sizeof(prog_data), ¶ms->wm_prog_kernel, ¶ms->wm_prog_data); ralloc_free(mem_ctx); } static void brw_blorp_setup_coord_transform(struct brw_blorp_coord_transform *xform, GLfloat src0, GLfloat src1, GLfloat dst0, GLfloat dst1, bool mirror) { double scale = (double)(src1 - src0) / (double)(dst1 - dst0); if (!mirror) { /* When not mirroring a coordinate (say, X), we need: * src_x - src_x0 = (dst_x - dst_x0 + 0.5) * scale * Therefore: * src_x = src_x0 + (dst_x - dst_x0 + 0.5) * scale * * blorp program uses "round toward zero" to convert the * transformed floating point coordinates to integer coordinates, * whereas the behaviour we actually want is "round to nearest", * so 0.5 provides the necessary correction. */ xform->multiplier = scale; xform->offset = src0 + (-(double)dst0 + 0.5) * scale; } else { /* When mirroring X we need: * src_x - src_x0 = dst_x1 - dst_x - 0.5 * Therefore: * src_x = src_x0 + (dst_x1 -dst_x - 0.5) * scale */ xform->multiplier = -scale; xform->offset = src0 + ((double)dst1 - 0.5) * scale; } } static inline void surf_get_intratile_offset_px(struct brw_blorp_surface_info *info, uint32_t *tile_x_px, uint32_t *tile_y_px) { if (info->surf.msaa_layout == ISL_MSAA_LAYOUT_INTERLEAVED) { struct isl_extent2d px_size_sa = isl_get_interleaved_msaa_px_size_sa(info->surf.samples); assert(info->tile_x_sa % px_size_sa.width == 0); assert(info->tile_y_sa % px_size_sa.height == 0); *tile_x_px = info->tile_x_sa / px_size_sa.width; *tile_y_px = info->tile_y_sa / px_size_sa.height; } else { *tile_x_px = info->tile_x_sa; *tile_y_px = info->tile_y_sa; } } static void surf_convert_to_single_slice(const struct isl_device *isl_dev, struct brw_blorp_surface_info *info) { /* Just bail if we have nothing to do. */ if (info->surf.dim == ISL_SURF_DIM_2D && info->view.base_level == 0 && info->view.base_array_layer == 0 && info->surf.levels == 1 && info->surf.logical_level0_px.array_len == 1) return; /* If this gets triggered then we've gotten here twice which. This * shouldn't happen thanks to the above early return. */ assert(info->tile_x_sa == 0 && info->tile_y_sa == 0); uint32_t layer = 0, z = 0; if (info->surf.dim == ISL_SURF_DIM_3D) z = info->view.base_array_layer + info->z_offset; else layer = info->view.base_array_layer; uint32_t x_offset_sa, y_offset_sa; isl_surf_get_image_offset_sa(&info->surf, info->view.base_level, layer, z, &x_offset_sa, &y_offset_sa); uint32_t byte_offset; isl_tiling_get_intratile_offset_sa(isl_dev, info->surf.tiling, info->surf.format, info->surf.row_pitch, x_offset_sa, y_offset_sa, &byte_offset, &info->tile_x_sa, &info->tile_y_sa); info->addr.offset += byte_offset; const uint32_t slice_width_px = minify(info->surf.logical_level0_px.width, info->view.base_level); const uint32_t slice_height_px = minify(info->surf.logical_level0_px.height, info->view.base_level); uint32_t tile_x_px, tile_y_px; surf_get_intratile_offset_px(info, &tile_x_px, &tile_y_px); /* TODO: Once this file gets converted to C, we shouls just use designated * initializers. */ struct isl_surf_init_info init_info = { 0, }; init_info.dim = ISL_SURF_DIM_2D; init_info.format = info->surf.format; init_info.width = slice_width_px + tile_x_px; init_info.height = slice_height_px + tile_y_px; init_info.depth = 1; init_info.levels = 1; init_info.array_len = 1; init_info.samples = info->surf.samples; init_info.min_pitch = info->surf.row_pitch; init_info.usage = info->surf.usage; init_info.tiling_flags = 1 << info->surf.tiling; isl_surf_init_s(isl_dev, &info->surf, &init_info); assert(info->surf.row_pitch == init_info.min_pitch); /* The view is also different now. */ info->view.base_level = 0; info->view.levels = 1; info->view.base_array_layer = 0; info->view.array_len = 1; info->z_offset = 0; } static void surf_fake_interleaved_msaa(const struct isl_device *isl_dev, struct brw_blorp_surface_info *info) { assert(info->surf.msaa_layout == ISL_MSAA_LAYOUT_INTERLEAVED); /* First, we need to convert it to a simple 1-level 1-layer 2-D surface */ surf_convert_to_single_slice(isl_dev, info); info->surf.logical_level0_px = info->surf.phys_level0_sa; info->surf.samples = 1; info->surf.msaa_layout = ISL_MSAA_LAYOUT_NONE; } static void surf_retile_w_to_y(const struct isl_device *isl_dev, struct brw_blorp_surface_info *info) { assert(info->surf.tiling == ISL_TILING_W); /* First, we need to convert it to a simple 1-level 1-layer 2-D surface */ surf_convert_to_single_slice(isl_dev, info); /* On gen7+, we don't have interleaved multisampling for color render * targets so we have to fake it. * * TODO: Are we sure we don't also need to fake it on gen6? */ if (isl_dev->info->gen > 6 && info->surf.msaa_layout == ISL_MSAA_LAYOUT_INTERLEAVED) { surf_fake_interleaved_msaa(isl_dev, info); } if (isl_dev->info->gen == 6) { /* Gen6 stencil buffers have a very large alignment coming in from the * miptree. It's out-of-bounds for what the surface state can handle. * Since we have a single layer and level, it doesn't really matter as * long as we don't pass a bogus value into isl_surf_fill_state(). */ info->surf.image_alignment_el = isl_extent3d(4, 2, 1); } /* Now that we've converted everything to a simple 2-D surface with only * one miplevel, we can go about retiling it. */ const unsigned x_align = 8, y_align = info->surf.samples != 0 ? 8 : 4; info->surf.tiling = ISL_TILING_Y0; info->surf.logical_level0_px.width = ALIGN(info->surf.logical_level0_px.width, x_align) * 2; info->surf.logical_level0_px.height = ALIGN(info->surf.logical_level0_px.height, y_align) / 2; info->tile_x_sa *= 2; info->tile_y_sa /= 2; } static void do_blorp_blit(struct blorp_batch *batch, struct blorp_params *params, struct brw_blorp_blit_prog_key *wm_prog_key, float src_x0, float src_y0, float src_x1, float src_y1, float dst_x0, float dst_y0, float dst_x1, float dst_y1, bool mirror_x, bool mirror_y) { const struct gen_device_info *devinfo = batch->blorp->isl_dev->info; if (isl_format_has_sint_channel(params->src.view.format)) { wm_prog_key->texture_data_type = nir_type_int; } else if (isl_format_has_uint_channel(params->src.view.format)) { wm_prog_key->texture_data_type = nir_type_uint; } else { wm_prog_key->texture_data_type = nir_type_float; } /* src_samples and dst_samples are the true sample counts */ wm_prog_key->src_samples = params->src.surf.samples; wm_prog_key->dst_samples = params->dst.surf.samples; wm_prog_key->tex_aux_usage = params->src.aux_usage; /* src_layout and dst_layout indicate the true MSAA layout used by src and * dst. */ wm_prog_key->src_layout = params->src.surf.msaa_layout; wm_prog_key->dst_layout = params->dst.surf.msaa_layout; /* Round floating point values to nearest integer to avoid "off by one texel" * kind of errors when blitting. */ params->x0 = params->wm_inputs.discard_rect.x0 = roundf(dst_x0); params->y0 = params->wm_inputs.discard_rect.y0 = roundf(dst_y0); params->x1 = params->wm_inputs.discard_rect.x1 = roundf(dst_x1); params->y1 = params->wm_inputs.discard_rect.y1 = roundf(dst_y1); brw_blorp_setup_coord_transform(¶ms->wm_inputs.coord_transform[0], src_x0, src_x1, dst_x0, dst_x1, mirror_x); brw_blorp_setup_coord_transform(¶ms->wm_inputs.coord_transform[1], src_y0, src_y1, dst_y0, dst_y1, mirror_y); if (devinfo->gen > 6 && params->dst.surf.msaa_layout == ISL_MSAA_LAYOUT_INTERLEAVED) { assert(params->dst.surf.samples > 1); /* We must expand the rectangle we send through the rendering pipeline, * to account for the fact that we are mapping the destination region as * single-sampled when it is in fact multisampled. We must also align * it to a multiple of the multisampling pattern, because the * differences between multisampled and single-sampled surface formats * will mean that pixels are scrambled within the multisampling pattern. * TODO: what if this makes the coordinates too large? * * Note: this only works if the destination surface uses the IMS layout. * If it's UMS, then we have no choice but to set up the rendering * pipeline as multisampled. */ struct isl_extent2d px_size_sa = isl_get_interleaved_msaa_px_size_sa(params->dst.surf.samples); params->x0 = ROUND_DOWN_TO(params->x0, 2) * px_size_sa.width; params->y0 = ROUND_DOWN_TO(params->y0, 2) * px_size_sa.height; params->x1 = ALIGN(params->x1, 2) * px_size_sa.width; params->y1 = ALIGN(params->y1, 2) * px_size_sa.height; surf_fake_interleaved_msaa(batch->blorp->isl_dev, ¶ms->dst); wm_prog_key->use_kill = true; wm_prog_key->need_dst_offset = true; } if (params->dst.surf.tiling == ISL_TILING_W) { /* We must modify the rectangle we send through the rendering pipeline * (and the size and x/y offset of the destination surface), to account * for the fact that we are mapping it as Y-tiled when it is in fact * W-tiled. * * Both Y tiling and W tiling can be understood as organizations of * 32-byte sub-tiles; within each 32-byte sub-tile, the layout of pixels * is different, but the layout of the 32-byte sub-tiles within the 4k * tile is the same (8 sub-tiles across by 16 sub-tiles down, in * column-major order). In Y tiling, the sub-tiles are 16 bytes wide * and 2 rows high; in W tiling, they are 8 bytes wide and 4 rows high. * * Therefore, to account for the layout differences within the 32-byte * sub-tiles, we must expand the rectangle so the X coordinates of its * edges are multiples of 8 (the W sub-tile width), and its Y * coordinates of its edges are multiples of 4 (the W sub-tile height). * Then we need to scale the X and Y coordinates of the rectangle to * account for the differences in aspect ratio between the Y and W * sub-tiles. We need to modify the layer width and height similarly. * * A correction needs to be applied when MSAA is in use: since * INTEL_MSAA_LAYOUT_IMS uses an interleaving pattern whose height is 4, * we need to align the Y coordinates to multiples of 8, so that when * they are divided by two they are still multiples of 4. * * Note: Since the x/y offset of the surface will be applied using the * SURFACE_STATE command packet, it will be invisible to the swizzling * code in the shader; therefore it needs to be in a multiple of the * 32-byte sub-tile size. Fortunately it is, since the sub-tile is 8 * pixels wide and 4 pixels high (when viewed as a W-tiled stencil * buffer), and the miplevel alignment used for stencil buffers is 8 * pixels horizontally and either 4 or 8 pixels vertically (see * intel_horizontal_texture_alignment_unit() and * intel_vertical_texture_alignment_unit()). * * Note: Also, since the SURFACE_STATE command packet can only apply * offsets that are multiples of 4 pixels horizontally and 2 pixels * vertically, it is important that the offsets will be multiples of * these sizes after they are converted into Y-tiled coordinates. * Fortunately they will be, since we know from above that the offsets * are a multiple of the 32-byte sub-tile size, and in Y-tiled * coordinates the sub-tile is 16 pixels wide and 2 pixels high. * * TODO: what if this makes the coordinates (or the texture size) too * large? */ const unsigned x_align = 8; const unsigned y_align = params->dst.surf.samples != 0 ? 8 : 4; params->x0 = ROUND_DOWN_TO(params->x0, x_align) * 2; params->y0 = ROUND_DOWN_TO(params->y0, y_align) / 2; params->x1 = ALIGN(params->x1, x_align) * 2; params->y1 = ALIGN(params->y1, y_align) / 2; /* Retile the surface to Y-tiled */ surf_retile_w_to_y(batch->blorp->isl_dev, ¶ms->dst); wm_prog_key->dst_tiled_w = true; wm_prog_key->use_kill = true; wm_prog_key->need_dst_offset = true; if (params->dst.surf.samples > 1) { /* If the destination surface is a W-tiled multisampled stencil * buffer that we're mapping as Y tiled, then we need to arrange for * the WM program to run once per sample rather than once per pixel, * because the memory layout of related samples doesn't match between * W and Y tiling. */ wm_prog_key->persample_msaa_dispatch = true; } } if (devinfo->gen < 8 && params->src.surf.tiling == ISL_TILING_W) { /* On Haswell and earlier, we have to fake W-tiled sources as Y-tiled. * Broadwell adds support for sampling from stencil. * * See the comments above concerning x/y offset alignment for the * destination surface. * * TODO: what if this makes the texture size too large? */ surf_retile_w_to_y(batch->blorp->isl_dev, ¶ms->src); wm_prog_key->src_tiled_w = true; wm_prog_key->need_src_offset = true; } /* tex_samples and rt_samples are the sample counts that are set up in * SURFACE_STATE. */ wm_prog_key->tex_samples = params->src.surf.samples; wm_prog_key->rt_samples = params->dst.surf.samples; /* tex_layout and rt_layout indicate the MSAA layout the GPU pipeline will * use to access the source and destination surfaces. */ wm_prog_key->tex_layout = params->src.surf.msaa_layout; wm_prog_key->rt_layout = params->dst.surf.msaa_layout; if (params->src.surf.samples > 0 && params->dst.surf.samples > 1) { /* We are blitting from a multisample buffer to a multisample buffer, so * we must preserve samples within a pixel. This means we have to * arrange for the WM program to run once per sample rather than once * per pixel. */ wm_prog_key->persample_msaa_dispatch = true; } if (params->src.tile_x_sa || params->src.tile_y_sa) { assert(wm_prog_key->need_src_offset); surf_get_intratile_offset_px(¶ms->src, ¶ms->wm_inputs.src_offset.x, ¶ms->wm_inputs.src_offset.y); } if (params->dst.tile_x_sa || params->dst.tile_y_sa) { assert(wm_prog_key->need_dst_offset); surf_get_intratile_offset_px(¶ms->dst, ¶ms->wm_inputs.dst_offset.x, ¶ms->wm_inputs.dst_offset.y); params->x0 += params->wm_inputs.dst_offset.x; params->y0 += params->wm_inputs.dst_offset.y; params->x1 += params->wm_inputs.dst_offset.x; params->y1 += params->wm_inputs.dst_offset.y; } /* For some texture types, we need to pass the layer through the sampler. */ params->wm_inputs.src_z = params->src.z_offset; brw_blorp_get_blit_kernel(batch->blorp, params, wm_prog_key); batch->blorp->exec(batch, params); } void blorp_blit(struct blorp_batch *batch, const struct blorp_surf *src_surf, unsigned src_level, unsigned src_layer, enum isl_format src_format, struct isl_swizzle src_swizzle, const struct blorp_surf *dst_surf, unsigned dst_level, unsigned dst_layer, enum isl_format dst_format, struct isl_swizzle dst_swizzle, float src_x0, float src_y0, float src_x1, float src_y1, float dst_x0, float dst_y0, float dst_x1, float dst_y1, GLenum filter, bool mirror_x, bool mirror_y) { struct blorp_params params; blorp_params_init(¶ms); brw_blorp_surface_info_init(batch->blorp, ¶ms.src, src_surf, src_level, src_layer, src_format, false); brw_blorp_surface_info_init(batch->blorp, ¶ms.dst, dst_surf, dst_level, dst_layer, dst_format, true); params.src.view.swizzle = src_swizzle; params.dst.view.swizzle = dst_swizzle; struct brw_blorp_blit_prog_key wm_prog_key; memset(&wm_prog_key, 0, sizeof(wm_prog_key)); /* Scaled blitting or not. */ wm_prog_key.blit_scaled = ((dst_x1 - dst_x0) == (src_x1 - src_x0) && (dst_y1 - dst_y0) == (src_y1 - src_y0)) ? false : true; /* Scaling factors used for bilinear filtering in multisample scaled * blits. */ if (params.src.surf.samples == 16) wm_prog_key.x_scale = 4.0f; else wm_prog_key.x_scale = 2.0f; wm_prog_key.y_scale = params.src.surf.samples / wm_prog_key.x_scale; if (filter == GL_LINEAR && params.src.surf.samples <= 1 && params.dst.surf.samples <= 1) wm_prog_key.bilinear_filter = true; if ((params.src.surf.usage & ISL_SURF_USAGE_DEPTH_BIT) == 0 && (params.src.surf.usage & ISL_SURF_USAGE_STENCIL_BIT) == 0 && !isl_format_has_int_channel(params.src.surf.format) && params.src.surf.samples > 1 && params.dst.surf.samples <= 1) { /* We are downsampling a non-integer color buffer, so blend. * * Regarding integer color buffers, the OpenGL ES 3.2 spec says: * * "If the source formats are integer types or stencil values, a * single sample's value is selected for each pixel." * * This implies we should not blend in that case. */ wm_prog_key.blend = true; } params.wm_inputs.rect_grid.x1 = minify(params.src.surf.logical_level0_px.width, src_level) * wm_prog_key.x_scale - 1.0f; params.wm_inputs.rect_grid.y1 = minify(params.src.surf.logical_level0_px.height, src_level) * wm_prog_key.y_scale - 1.0f; do_blorp_blit(batch, ¶ms, &wm_prog_key, src_x0, src_y0, src_x1, src_y1, dst_x0, dst_y0, dst_x1, dst_y1, mirror_x, mirror_y); } static enum isl_format get_copy_format_for_bpb(unsigned bpb) { /* The choice of UNORM and UINT formats is very intentional here. Most of * the time, we want to use a UINT format to avoid any rounding error in * the blit. For stencil blits, R8_UINT is required by the hardware. * (It's the only format allowed in conjunction with W-tiling.) Also we * intentionally use the 4-channel formats whenever we can. This is so * that, when we do a RGB <-> RGBX copy, the two formats will line up even * though one of them is 3/4 the size of the other. The choice of UNORM * vs. UINT is also very intentional because Haswell doesn't handle 8 or * 16-bit RGB UINT formats at all so we have to use UNORM there. * Fortunately, the only time we should ever use two different formats in * the table below is for RGB -> RGBA blits and so we will never have any * UNORM/UINT mismatch. */ switch (bpb) { case 8: return ISL_FORMAT_R8_UINT; case 16: return ISL_FORMAT_R8G8_UINT; case 24: return ISL_FORMAT_R8G8B8_UNORM; case 32: return ISL_FORMAT_R8G8B8A8_UNORM; case 48: return ISL_FORMAT_R16G16B16_UNORM; case 64: return ISL_FORMAT_R16G16B16A16_UNORM; case 96: return ISL_FORMAT_R32G32B32_UINT; case 128:return ISL_FORMAT_R32G32B32A32_UINT; default: unreachable("Unknown format bpb"); } } static void surf_convert_to_uncompressed(const struct isl_device *isl_dev, struct brw_blorp_surface_info *info, uint32_t *x, uint32_t *y, uint32_t *width, uint32_t *height) { const struct isl_format_layout *fmtl = isl_format_get_layout(info->surf.format); assert(fmtl->bw > 1 || fmtl->bh > 1); /* This is a compressed surface. We need to convert it to a single * slice (because compressed layouts don't perfectly match uncompressed * ones with the same bpb) and divide x, y, width, and height by the * block size. */ surf_convert_to_single_slice(isl_dev, info); if (width || height) { #ifndef NDEBUG uint32_t right_edge_px = info->tile_x_sa + *x + *width; uint32_t bottom_edge_px = info->tile_y_sa + *y + *height; assert(*width % fmtl->bw == 0 || right_edge_px == info->surf.logical_level0_px.width); assert(*height % fmtl->bh == 0 || bottom_edge_px == info->surf.logical_level0_px.height); #endif *width = DIV_ROUND_UP(*width, fmtl->bw); *height = DIV_ROUND_UP(*height, fmtl->bh); } assert(*x % fmtl->bw == 0); assert(*y % fmtl->bh == 0); *x /= fmtl->bw; *y /= fmtl->bh; info->surf.logical_level0_px.width = DIV_ROUND_UP(info->surf.logical_level0_px.width, fmtl->bw); info->surf.logical_level0_px.height = DIV_ROUND_UP(info->surf.logical_level0_px.height, fmtl->bh); assert(info->surf.phys_level0_sa.width % fmtl->bw == 0); assert(info->surf.phys_level0_sa.height % fmtl->bh == 0); info->surf.phys_level0_sa.width /= fmtl->bw; info->surf.phys_level0_sa.height /= fmtl->bh; assert(info->tile_x_sa % fmtl->bw == 0); assert(info->tile_y_sa % fmtl->bh == 0); info->tile_x_sa /= fmtl->bw; info->tile_y_sa /= fmtl->bh; /* It's now an uncompressed surface so we need an uncompressed format */ info->surf.format = get_copy_format_for_bpb(fmtl->bpb); } static void surf_fake_rgb_with_red(const struct isl_device *isl_dev, struct brw_blorp_surface_info *info, uint32_t *x, uint32_t *width) { surf_convert_to_single_slice(isl_dev, info); info->surf.logical_level0_px.width *= 3; info->surf.phys_level0_sa.width *= 3; *x *= 3; *width *= 3; enum isl_format red_format; switch (info->view.format) { case ISL_FORMAT_R8G8B8_UNORM: red_format = ISL_FORMAT_R8_UNORM; break; case ISL_FORMAT_R16G16B16_UNORM: red_format = ISL_FORMAT_R16_UNORM; break; case ISL_FORMAT_R32G32B32_UINT: red_format = ISL_FORMAT_R32_UINT; break; default: unreachable("Invalid RGB copy destination format"); } assert(isl_format_get_layout(red_format)->channels.r.type == isl_format_get_layout(info->view.format)->channels.r.type); assert(isl_format_get_layout(red_format)->channels.r.bits == isl_format_get_layout(info->view.format)->channels.r.bits); info->surf.format = info->view.format = red_format; } void blorp_copy(struct blorp_batch *batch, const struct blorp_surf *src_surf, unsigned src_level, unsigned src_layer, const struct blorp_surf *dst_surf, unsigned dst_level, unsigned dst_layer, uint32_t src_x, uint32_t src_y, uint32_t dst_x, uint32_t dst_y, uint32_t src_width, uint32_t src_height) { struct blorp_params params; if (src_width == 0 || src_height == 0) return; blorp_params_init(¶ms); brw_blorp_surface_info_init(batch->blorp, ¶ms.src, src_surf, src_level, src_layer, ISL_FORMAT_UNSUPPORTED, false); brw_blorp_surface_info_init(batch->blorp, ¶ms.dst, dst_surf, dst_level, dst_layer, ISL_FORMAT_UNSUPPORTED, true); struct brw_blorp_blit_prog_key wm_prog_key; memset(&wm_prog_key, 0, sizeof(wm_prog_key)); const struct isl_format_layout *src_fmtl = isl_format_get_layout(params.src.surf.format); const struct isl_format_layout *dst_fmtl = isl_format_get_layout(params.dst.surf.format); params.src.view.format = get_copy_format_for_bpb(src_fmtl->bpb); if (src_fmtl->bw > 1 || src_fmtl->bh > 1) { surf_convert_to_uncompressed(batch->blorp->isl_dev, ¶ms.src, &src_x, &src_y, &src_width, &src_height); wm_prog_key.need_src_offset = true; } params.dst.view.format = get_copy_format_for_bpb(dst_fmtl->bpb); if (dst_fmtl->bw > 1 || dst_fmtl->bh > 1) { surf_convert_to_uncompressed(batch->blorp->isl_dev, ¶ms.dst, &dst_x, &dst_y, NULL, NULL); wm_prog_key.need_dst_offset = true; } /* Once both surfaces are stompped to uncompressed as needed, the * destination size is the same as the source size. */ uint32_t dst_width = src_width; uint32_t dst_height = src_height; if (dst_fmtl->bpb % 3 == 0) { surf_fake_rgb_with_red(batch->blorp->isl_dev, ¶ms.dst, &dst_x, &dst_width); wm_prog_key.dst_rgb = true; wm_prog_key.need_dst_offset = true; } do_blorp_blit(batch, ¶ms, &wm_prog_key, src_x, src_y, src_x + src_width, src_y + src_height, dst_x, dst_y, dst_x + dst_width, dst_y + dst_height, false, false); }