/* Copyright (c) Mark J. Kilgard, 1994, 1995, 1996, 1997, 1998. */ /* This program is freely distributable without licensing fees and is provided without guarantee or warrantee expressed or implied. This program is -not- in the public domain. */ #ifdef __VMS #include <GL/vms_x_fix.h> #endif #include <stdlib.h> #include <stdio.h> #include <errno.h> #include <assert.h> #include <string.h> /* Some FD_ZERO macros use memset without prototyping memset. */ /* Much of the following #ifdef logic to include the proper prototypes for the select system call is based on logic from the X11R6.3 version of <X11/Xpoll.h>. */ #if !defined(_WIN32) # ifdef __sgi # include <bstring.h> /* prototype for bzero used by FD_ZERO */ # endif # if (defined(__FreeBSD__) || defined(SVR4) || defined(CRAY) || defined(AIXV3)) && !defined(FD_SETSIZE) # include <sys/select.h> /* select system call interface */ # ifdef luna # include <sysent.h> # endif # endif /* AIX 4.2 fubar-ed <sys/select.h>, so go to heroic measures to get it */ # if defined(AIXV4) && !defined(NFDBITS) # include <sys/select.h> # endif #endif /* !_WIN32 */ #include <sys/types.h> #if !defined(_WIN32) # if defined(__vms) && ( __VMS_VER < 70000000 ) # include <sys/time.h> # else # ifndef __vms # include <sys/time.h> # endif # endif # include <unistd.h> # include <X11/Xlib.h> # include <X11/keysym.h> #else # ifdef __CYGWIN32__ # include <sys/time.h> # else # include <sys/timeb.h> # endif # ifdef __hpux /* XXX Bert Gijsbers <bert@mc.bio.uva.nl> reports that HP-UX needs different keysyms for the End, Insert, and Delete keys to work on an HP 715. It would be better if HP generated standard keysyms for standard keys. */ # include <X11/HPkeysym.h> # endif #endif /* !_WIN32 */ #include "glutint.h" #if defined(__vms) && ( __VMS_VER < 70000000 ) #include <ssdef.h> #include <psldef.h> extern int SYS$CLREF(int efn); extern int SYS$SETIMR(unsigned int efn, struct timeval6 *timeout, void *ast, unsigned int request_id, unsigned int flags); extern int SYS$WFLOR(unsigned int efn, unsigned int mask); extern int SYS$CANTIM(unsigned int request_id, unsigned int mode); #endif /* __vms, VMs 6.2 or earlier */ static GLUTtimer *freeTimerList = NULL; GLUTidleCB __glutIdleFunc = NULL; GLUTtimer *__glutTimerList = NULL; #ifdef SUPPORT_FORTRAN GLUTtimer *__glutNewTimer; #endif GLUTwindow *__glutWindowWorkList = NULL; GLUTmenu *__glutMappedMenu; GLUTmenu *__glutCurrentMenu = NULL; void (*__glutUpdateInputDeviceMaskFunc) (GLUTwindow *); #if !defined(_WIN32) void (*__glutMenuItemEnterOrLeave)(GLUTmenuItem * item, int num, int type) = NULL; void (*__glutFinishMenu)(Window win, int x, int y); void (*__glutPaintMenu)(GLUTmenu * menu); void (*__glutStartMenu)(GLUTmenu * menu, GLUTwindow * window, int x, int y, int x_win, int y_win); GLUTmenu * (*__glutGetMenuByNum)(int menunum); GLUTmenuItem * (*__glutGetMenuItem)(GLUTmenu * menu, Window win, int *which); GLUTmenu * (*__glutGetMenu)(Window win); #endif Atom __glutMotifHints = None; /* Modifier mask of ~0 implies not in core input callback. */ unsigned int __glutModifierMask = (unsigned int) ~0; int __glutWindowDamaged = 0; void GLUTAPIENTRY glutIdleFunc(GLUTidleCB idleFunc) { __glutIdleFunc = idleFunc; } void GLUTAPIENTRY glutTimerFunc(unsigned int interval, GLUTtimerCB timerFunc, int value) { GLUTtimer *timer, *other; GLUTtimer **prevptr; #ifdef OLD_VMS struct timeval6 now; #else struct timeval now; #endif if (!timerFunc) return; if (freeTimerList) { timer = freeTimerList; freeTimerList = timer->next; } else { timer = (GLUTtimer *) malloc(sizeof(GLUTtimer)); if (!timer) __glutFatalError("out of memory."); } timer->func = timerFunc; #if defined(__vms) && ( __VMS_VER < 70000000 ) /* VMS time is expressed in units of 100 ns */ timer->timeout.val = interval * TICKS_PER_MILLISECOND; #else timer->timeout.tv_sec = (int) interval / 1000; timer->timeout.tv_usec = (int) (interval % 1000) * 1000; #endif timer->value = value; timer->next = NULL; GETTIMEOFDAY(&now); ADD_TIME(timer->timeout, timer->timeout, now); prevptr = &__glutTimerList; other = *prevptr; while (other && IS_AFTER(other->timeout, timer->timeout)) { prevptr = &other->next; other = *prevptr; } timer->next = other; #ifdef SUPPORT_FORTRAN __glutNewTimer = timer; /* for Fortran binding! */ #endif *prevptr = timer; } void handleTimeouts(void) { #ifdef OLD_VMS struct timeval6 now; #else struct timeval now; #endif GLUTtimer *timer; /* Assumption is that __glutTimerList is already determined to be non-NULL. */ GETTIMEOFDAY(&now); while (IS_AT_OR_AFTER(__glutTimerList->timeout, now)) { timer = __glutTimerList; /* call the timer function */ timer->func(timer->value); /* remove from the linked list */ __glutTimerList = timer->next; /* put this timer on the "free" list */ timer->next = freeTimerList; freeTimerList = timer; if (!__glutTimerList) break; } } void __glutPutOnWorkList(GLUTwindow * window, int workMask) { if (window->workMask) { /* Already on list; just OR in new workMask. */ window->workMask |= workMask; } else { /* Update work mask and add to window work list. */ window->workMask = workMask; /* Assert that if the window does not have a workMask already, the window should definitely not be the head of the work list. */ assert(window != __glutWindowWorkList); window->prevWorkWin = __glutWindowWorkList; __glutWindowWorkList = window; } } void __glutPostRedisplay(GLUTwindow * window, int layerMask) { int shown = (layerMask & (GLUT_REDISPLAY_WORK | GLUT_REPAIR_WORK)) ? window->shownState : window->overlay->shownState; /* Post a redisplay if the window is visible (or the visibility of the window is unknown, ie. window->visState == -1) _and_ the layer is known to be shown. */ if (window->visState != GLUT_HIDDEN && window->visState != GLUT_FULLY_COVERED && shown) { __glutPutOnWorkList(window, layerMask); } } /* CENTRY */ void GLUTAPIENTRY glutPostRedisplay(void) { __glutPostRedisplay(__glutCurrentWindow, GLUT_REDISPLAY_WORK); } /* The advantage of this routine is that it saves the cost of a glutSetWindow call (entailing an expensive OpenGL context switch), particularly useful when multiple windows need redisplays posted at the same times. See also glutPostWindowOverlayRedisplay. */ void GLUTAPIENTRY glutPostWindowRedisplay(int win) { __glutPostRedisplay(__glutWindowList[win - 1], GLUT_REDISPLAY_WORK); } /* ENDCENTRY */ static GLUTeventParser *eventParserList = NULL; /* __glutRegisterEventParser allows another module to register to intercept X events types not otherwise acted on by the GLUT processEventsAndTimeouts routine. The X Input extension support code uses an event parser for handling X Input extension events. */ void __glutRegisterEventParser(GLUTeventParser * parser) { parser->next = eventParserList; eventParserList = parser; } static void markWindowHidden(GLUTwindow * window) { if (GLUT_HIDDEN != window->visState) { GLUTwindow *child; if (window->windowStatus) { window->visState = GLUT_HIDDEN; __glutSetWindow(window); window->windowStatus(GLUT_HIDDEN); } /* An unmap is only reported on a single window; its descendents need to know they are no longer visible. */ child = window->children; while (child) { markWindowHidden(child); child = child->siblings; } } } #if !defined(_WIN32) static void purgeStaleWindow(Window win) { GLUTstale **pEntry = &__glutStaleWindowList; GLUTstale *entry = __glutStaleWindowList; /* Tranverse singly-linked stale window list look for the window ID. */ while (entry) { if (entry->win == win) { /* Found it; delete it. */ *pEntry = entry->next; free(entry); return; } else { pEntry = &entry->next; entry = *pEntry; } } } /* Unlike XNextEvent, if a signal arrives, interruptibleXNextEvent will return (with a zero return value). This helps GLUT drop out of XNextEvent if a signal is delivered. The intent is so that a GLUT program can call glutIdleFunc in a signal handler to register an idle func and then immediately get dropped into the idle func (after returning from the signal handler). The idea is to make GLUT's main loop reliably interruptible by signals. */ static int interruptibleXNextEvent(Display * dpy, XEvent * event) { fd_set fds; int rc; /* Flush X protocol since XPending does not do this implicitly. */ XFlush(__glutDisplay); for (;;) { if (XPending(__glutDisplay)) { XNextEvent(dpy, event); return 1; } #ifndef VMS /* the combination ConectionNumber-select is buggy on VMS. Sometimes it * fails. This part of the code hangs the program on VMS7.2. But even * without it the program seems to run correctly. * Note that this is a bug in the VMS/DECWindows run-time-libraries. * Compaq engeneering does not want or is not able to make a fix. * (last sentence is a quotation from Compaq when I reported the * problem January 2000) */ FD_ZERO(&fds); FD_SET(__glutConnectionFD, &fds); rc = select(__glutConnectionFD + 1, &fds, NULL, NULL, NULL); if (rc < 0) { if (errno == EINTR) { return 0; } else { __glutFatalError("select error."); } } #endif } } #endif static void processEventsAndTimeouts(void) { do { #if defined(_WIN32) MSG event; if(!GetMessage(&event, NULL, 0, 0)) /* bail if no more messages */ exit(0); TranslateMessage(&event); /* translate virtual-key messages */ DispatchMessage(&event); /* call the window proc */ /* see win32_event.c for event (message) processing procedures */ #else static int mappedMenuButton; GLUTeventParser *parser; XEvent event, ahead; GLUTwindow *window; GLUTkeyboardCB keyboard; GLUTspecialCB special; int gotEvent, width, height; gotEvent = interruptibleXNextEvent(__glutDisplay, &event); if (gotEvent) { switch (event.type) { case MappingNotify: XRefreshKeyboardMapping((XMappingEvent *) & event); break; case ConfigureNotify: window = __glutGetWindow(event.xconfigure.window); if (window) { if (window->win != event.xconfigure.window) { /* Ignore ConfigureNotify sent to the overlay planes. GLUT could get here because overlays select for StructureNotify events to receive DestroyNotify. */ break; } width = event.xconfigure.width; height = event.xconfigure.height; if (width != window->width || height != window->height) { if (window->overlay) { XResizeWindow(__glutDisplay, window->overlay->win, width, height); } window->width = width; window->height = height; __glutSetWindow(window); /* Do not execute OpenGL out of sequence with respect to the XResizeWindow request! */ glXWaitX(); window->reshape(width, height); window->forceReshape = False; /* A reshape should be considered like posting a repair; this is necessary for the "Mesa glXSwapBuffers to repair damage" hack to operate correctly. Without it, there's not an initial back buffer render from which to blit from when damage happens to the window. */ __glutPostRedisplay(window, GLUT_REPAIR_WORK); } } break; case Expose: /* compress expose events */ while (XEventsQueued(__glutDisplay, QueuedAfterReading) > 0) { XPeekEvent(__glutDisplay, &ahead); if (ahead.type != Expose || ahead.xexpose.window != event.xexpose.window) { break; } XNextEvent(__glutDisplay, &event); } if (event.xexpose.count == 0) { GLUTmenu *menu; if (__glutMappedMenu && (menu = __glutGetMenu(event.xexpose.window))) { __glutPaintMenu(menu); } else { window = __glutGetWindow(event.xexpose.window); if (window) { if (window->win == event.xexpose.window) { __glutPostRedisplay(window, GLUT_REPAIR_WORK); } else if (window->overlay && window->overlay->win == event.xexpose.window) { __glutPostRedisplay(window, GLUT_OVERLAY_REPAIR_WORK); } } } } else { /* there are more exposes to read; wait to redisplay */ } break; case ButtonPress: case ButtonRelease: if (__glutMappedMenu && event.type == ButtonRelease && mappedMenuButton == event.xbutton.button) { /* Menu is currently popped up and its button is released. */ __glutFinishMenu(event.xbutton.window, event.xbutton.x, event.xbutton.y); } else { window = __glutGetWindow(event.xbutton.window); /* added button check for mice with > 3 buttons */ if (window) { GLUTmenu *menu; int menuNum; if (event.xbutton.button <= GLUT_MAX_MENUS) menuNum = window->menu[event.xbutton.button - 1]; else menuNum = 0; /* Make sure that __glutGetMenuByNum is only called if there really is a menu present. */ if ((menuNum > 0) && (menu = __glutGetMenuByNum(menuNum))) { if (event.type == ButtonPress && !__glutMappedMenu) { __glutStartMenu(menu, window, event.xbutton.x_root, event.xbutton.y_root, event.xbutton.x, event.xbutton.y); mappedMenuButton = event.xbutton.button; } else { /* Ignore a release of a button with a menu attatched to it when no menu is popped up, or ignore a press when another menu is already popped up. */ } } else if (window->mouse) { __glutSetWindow(window); __glutModifierMask = event.xbutton.state; window->mouse(event.xbutton.button - 1, event.type == ButtonRelease ? GLUT_UP : GLUT_DOWN, event.xbutton.x, event.xbutton.y); __glutModifierMask = ~0; } else { /* Stray mouse events. Ignore. */ } } else { /* Window might have been destroyed and all the events for the window may not yet be received. */ } } break; case MotionNotify: if (!__glutMappedMenu) { window = __glutGetWindow(event.xmotion.window); if (window) { /* If motion function registered _and_ buttons held * down, call motion function... */ if (window->motion && event.xmotion.state & (Button1Mask | Button2Mask | Button3Mask)) { __glutSetWindow(window); window->motion(event.xmotion.x, event.xmotion.y); } /* If passive motion function registered _and_ buttons not held down, call passive motion function... */ else if (window->passive && ((event.xmotion.state & (Button1Mask | Button2Mask | Button3Mask)) == 0)) { __glutSetWindow(window); window->passive(event.xmotion.x, event.xmotion.y); } } } else { /* Motion events are thrown away when a pop up menu is active. */ } break; case KeyPress: case KeyRelease: window = __glutGetWindow(event.xkey.window); if (!window) { break; } if (event.type == KeyPress) { keyboard = window->keyboard; } else { /* If we are ignoring auto repeated keys for this window, check if the next event in the X event queue is a KeyPress for the exact same key (and at the exact same time) as the key being released. The X11 protocol will send auto repeated keys as such KeyRelease/KeyPress pairs. */ if (window->ignoreKeyRepeat) { if (XEventsQueued(__glutDisplay, QueuedAfterReading)) { XPeekEvent(__glutDisplay, &ahead); if (ahead.type == KeyPress && ahead.xkey.window == event.xkey.window && ahead.xkey.keycode == event.xkey.keycode && ahead.xkey.time == event.xkey.time) { /* Pop off the repeated KeyPress and ignore the auto repeated KeyRelease/KeyPress pair. */ XNextEvent(__glutDisplay, &event); break; } } } keyboard = window->keyboardUp; } if (keyboard) { char tmp[1]; int rc; rc = XLookupString(&event.xkey, tmp, sizeof(tmp), NULL, NULL); if (rc) { __glutSetWindow(window); __glutModifierMask = event.xkey.state; keyboard(tmp[0], event.xkey.x, event.xkey.y); __glutModifierMask = ~0; break; } } if (event.type == KeyPress) { special = window->special; } else { special = window->specialUp; } if (special) { KeySym ks; int key; /* Introduced in X11R6: (Partial list of) Keypad Functions. Define in place in case compiling against an older pre-X11R6 X11/keysymdef.h file. */ #ifndef XK_KP_Home #define XK_KP_Home 0xFF95 #endif #ifndef XK_KP_Left #define XK_KP_Left 0xFF96 #endif #ifndef XK_KP_Up #define XK_KP_Up 0xFF97 #endif #ifndef XK_KP_Right #define XK_KP_Right 0xFF98 #endif #ifndef XK_KP_Down #define XK_KP_Down 0xFF99 #endif #ifndef XK_KP_Prior #define XK_KP_Prior 0xFF9A #endif #ifndef XK_KP_Next #define XK_KP_Next 0xFF9B #endif #ifndef XK_KP_End #define XK_KP_End 0xFF9C #endif #ifndef XK_KP_Insert #define XK_KP_Insert 0xFF9E #endif #ifndef XK_KP_Delete #define XK_KP_Delete 0xFF9F #endif ks = XLookupKeysym((XKeyEvent *) & event, 0); /* XXX Verbose, but makes no assumptions about keysym layout. */ switch (ks) { /* *INDENT-OFF* */ /* function keys */ case XK_F1: key = GLUT_KEY_F1; break; case XK_F2: key = GLUT_KEY_F2; break; case XK_F3: key = GLUT_KEY_F3; break; case XK_F4: key = GLUT_KEY_F4; break; case XK_F5: key = GLUT_KEY_F5; break; case XK_F6: key = GLUT_KEY_F6; break; case XK_F7: key = GLUT_KEY_F7; break; case XK_F8: key = GLUT_KEY_F8; break; case XK_F9: key = GLUT_KEY_F9; break; case XK_F10: key = GLUT_KEY_F10; break; case XK_F11: key = GLUT_KEY_F11; break; case XK_F12: key = GLUT_KEY_F12; break; /* directional keys */ case XK_KP_Left: case XK_Left: key = GLUT_KEY_LEFT; break; case XK_KP_Up: /* Introduced in X11R6. */ case XK_Up: key = GLUT_KEY_UP; break; case XK_KP_Right: /* Introduced in X11R6. */ case XK_Right: key = GLUT_KEY_RIGHT; break; case XK_KP_Down: /* Introduced in X11R6. */ case XK_Down: key = GLUT_KEY_DOWN; break; /* *INDENT-ON* */ case XK_KP_Prior: /* Introduced in X11R6. */ case XK_Prior: /* XK_Prior same as X11R6's XK_Page_Up */ key = GLUT_KEY_PAGE_UP; break; case XK_KP_Next: /* Introduced in X11R6. */ case XK_Next: /* XK_Next same as X11R6's XK_Page_Down */ key = GLUT_KEY_PAGE_DOWN; break; case XK_KP_Home: /* Introduced in X11R6. */ case XK_Home: key = GLUT_KEY_HOME; break; #ifdef __hpux case XK_Select: #endif case XK_KP_End: /* Introduced in X11R6. */ case XK_End: key = GLUT_KEY_END; break; #ifdef __hpux case XK_InsertChar: #endif case XK_KP_Insert: /* Introduced in X11R6. */ case XK_Insert: key = GLUT_KEY_INSERT; break; #ifdef __hpux case XK_DeleteChar: #endif case XK_KP_Delete: /* Introduced in X11R6. */ /* The Delete character is really an ASCII key. */ __glutSetWindow(window); assert(keyboard); keyboard(127, /* ASCII Delete character. */ event.xkey.x, event.xkey.y); goto skip; default: goto skip; } __glutSetWindow(window); __glutModifierMask = event.xkey.state; special(key, event.xkey.x, event.xkey.y); __glutModifierMask = ~0; skip:; } break; case EnterNotify: case LeaveNotify: if (event.xcrossing.mode != NotifyNormal || event.xcrossing.detail == NotifyNonlinearVirtual || event.xcrossing.detail == NotifyVirtual) { /* Careful to ignore Enter/LeaveNotify events that come from the pop-up menu pointer grab and ungrab. Also, ignore "virtual" Enter/LeaveNotify events since they represent the pointer passing through the window hierarchy without actually entering or leaving the actual real estate of a window. */ break; } if (__glutMappedMenu) { GLUTmenuItem *item; int num; item = __glutGetMenuItem(__glutMappedMenu, event.xcrossing.window, &num); if (item) { __glutMenuItemEnterOrLeave(item, num, event.type); break; } } window = __glutGetWindow(event.xcrossing.window); if (window) { if (window->entry) { if (event.type == EnterNotify) { /* With overlays established, X can report two enter events for both the overlay and normal plane window. Do not generate a second enter callback if we reported one without an intervening leave. */ if (window->entryState != EnterNotify) { int num = window->num; Window xid = window->win; window->entryState = EnterNotify; __glutSetWindow(window); window->entry(GLUT_ENTERED); if (__glutMappedMenu) { /* Do not generate any passive motion events when menus are in use. */ } else { /* An EnterNotify event can result in a "compound" callback if a passive motion callback is also registered. In this case, be a little paranoid about the possibility the window could have been destroyed in the entry callback. */ window = __glutWindowList[num]; if (window && window->passive && window->win == xid) { __glutSetWindow(window); window->passive(event.xcrossing.x, event.xcrossing.y); } } } } else { if (window->entryState != LeaveNotify) { /* When an overlay is established for a window already mapped and with the pointer in it, the X server will generate a leave/enter event pair as the pointer leaves (without moving) from the normal plane X window to the newly mapped overlay X window (or vice versa). This enter/leave pair should not be reported to the GLUT program since the pair is a consequence of creating (or destroying) the overlay, not an actual leave from the GLUT window. */ if (XEventsQueued(__glutDisplay, QueuedAfterReading)) { XPeekEvent(__glutDisplay, &ahead); if (ahead.type == EnterNotify && __glutGetWindow(ahead.xcrossing.window) == window) { XNextEvent(__glutDisplay, &event); break; } } window->entryState = LeaveNotify; __glutSetWindow(window); window->entry(GLUT_LEFT); } } } else if (window->passive) { __glutSetWindow(window); window->passive(event.xcrossing.x, event.xcrossing.y); } } break; case UnmapNotify: /* MapNotify events are not needed to maintain visibility state since VisibilityNotify events will be delivered when a window becomes visible from mapping. However, VisibilityNotify events are not delivered when a window is unmapped (for the window or its children). */ window = __glutGetWindow(event.xunmap.window); if (window) { if (window->win != event.xconfigure.window) { /* Ignore UnmapNotify sent to the overlay planes. GLUT could get here because overlays select for StructureNotify events to receive DestroyNotify. */ break; } markWindowHidden(window); } break; case VisibilityNotify: window = __glutGetWindow(event.xvisibility.window); if (window) { /* VisibilityUnobscured+1 = GLUT_FULLY_RETAINED, VisibilityPartiallyObscured+1 = GLUT_PARTIALLY_RETAINED, VisibilityFullyObscured+1 = GLUT_FULLY_COVERED. */ int visState = event.xvisibility.state + 1; if (visState != window->visState) { if (window->windowStatus) { window->visState = visState; __glutSetWindow(window); window->windowStatus(visState); } } } break; case ClientMessage: if (event.xclient.data.l[0] == __glutWMDeleteWindow) exit(0); break; case DestroyNotify: purgeStaleWindow(event.xdestroywindow.window); break; case CirculateNotify: case CreateNotify: case GravityNotify: case ReparentNotify: /* Uninteresting to GLUT (but possible for GLUT to receive). */ break; default: /* Pass events not directly handled by the GLUT main event loop to any event parsers that have been registered. In this way, X Input extension events are passed to the correct handler without forcing all GLUT programs to support X Input event handling. */ parser = eventParserList; while (parser) { if (parser->func(&event)) break; parser = parser->next; } break; } } #endif /* _WIN32 */ if (__glutTimerList) { handleTimeouts(); } } while (XPending(__glutDisplay)); } static void waitForSomething(void) { #if defined(__vms) && ( __VMS_VER < 70000000 ) static struct timeval6 zerotime = {0}; unsigned int timer_efn; #define timer_id 'glut' /* random :-) number */ unsigned int wait_mask; #else static struct timeval zerotime = {0, 0}; #if !defined(_WIN32) fd_set fds; #endif #endif #ifdef OLD_VMS struct timeval6 now, timeout, waittime; #else struct timeval now, timeout, waittime; #endif #if !defined(_WIN32) int rc; #endif /* Flush X protocol since XPending does not do this implicitly. */ XFlush(__glutDisplay); if (XPending(__glutDisplay)) { /* It is possible (but quite rare) that XFlush may have needed to wait for a writable X connection file descriptor, and in the process, may have had to read off X protocol from the file descriptor. If XPending is true, this case occured and we should avoid waiting in select since X protocol buffered within Xlib is due to be processed and potentially no more X protocol is on the file descriptor, so we would risk waiting improperly in select. */ goto immediatelyHandleXinput; } #if defined(__vms) && ( __VMS_VER < 70000000 ) timeout = __glutTimerList->timeout; GETTIMEOFDAY(&now); wait_mask = 1 << (__glutConnectionFD & 31); if (IS_AFTER(now, timeout)) { /* We need an event flag for the timer. */ /* XXX The `right' way to do this is to use LIB$GET_EF, but since it needs to be in the same cluster as the EFN for the display, we will have hack it. */ timer_efn = __glutConnectionFD - 1; if ((timer_efn / 32) != (__glutConnectionFD / 32)) { timer_efn = __glutConnectionFD + 1; } rc = SYS$CLREF(timer_efn); rc = SYS$SETIMR(timer_efn, &timeout, NULL, timer_id, 0); wait_mask |= 1 << (timer_efn & 31); } else { timer_efn = 0; } rc = SYS$WFLOR(__glutConnectionFD, wait_mask); if (timer_efn != 0 && SYS$CLREF(timer_efn) == SS$_WASCLR) { rc = SYS$CANTIM(timer_id, PSL$C_USER); } /* XXX There does not seem to be checking of "rc" in the code above. Can any of the SYS$ routines above fail? */ #else /* not vms6.2 or lower */ #if !defined(_WIN32) FD_ZERO(&fds); FD_SET(__glutConnectionFD, &fds); #endif timeout = __glutTimerList->timeout; GETTIMEOFDAY(&now); if (IS_AFTER(now, timeout)) { TIMEDELTA(waittime, timeout, now); } else { waittime = zerotime; } #if !defined(_WIN32) rc = select(__glutConnectionFD + 1, &fds, NULL, NULL, &waittime); if (rc < 0 && errno != EINTR) __glutFatalError("select error."); #else MsgWaitForMultipleObjects(0, NULL, FALSE, waittime.tv_sec*1000 + waittime.tv_usec/1000, QS_ALLINPUT); #endif #endif /* not vms6.2 or lower */ /* Without considering the cause of select unblocking, check for pending X events and handle any timeouts (by calling processEventsAndTimeouts). We always look for X events even if select returned with 0 (indicating a timeout); otherwise we risk starving X event processing by continous timeouts. */ if (XPending(__glutDisplay)) { immediatelyHandleXinput: processEventsAndTimeouts(); } else { if (__glutTimerList) handleTimeouts(); } } static void idleWait(void) { if (XPending(__glutDisplay)) { processEventsAndTimeouts(); } else { if (__glutTimerList) { handleTimeouts(); } } /* Make sure idle func still exists! */ if (__glutIdleFunc) { __glutIdleFunc(); } } static GLUTwindow **beforeEnd; static GLUTwindow * processWindowWorkList(GLUTwindow * window) { int workMask; if (window->prevWorkWin) { window->prevWorkWin = processWindowWorkList(window->prevWorkWin); } else { beforeEnd = &window->prevWorkWin; } /* Capture work mask for work that needs to be done to this window, then clear the window's work mask (excepting the dummy work bit, see below). Then, process the captured work mask. This allows callbacks in the processing the captured work mask to set the window's work mask for subsequent processing. */ workMask = window->workMask; assert((workMask & GLUT_DUMMY_WORK) == 0); /* Set the dummy work bit, clearing all other bits, to indicate that the window is currently on the window work list _and_ that the window's work mask is currently being processed. This convinces __glutPutOnWorkList that this window is on the work list still. */ window->workMask = GLUT_DUMMY_WORK; /* Optimization: most of the time, the work to do is a redisplay and not these other types of work. Check for the following cases as a group to before checking each one individually one by one. This saves about 25 MIPS instructions in the common redisplay only case. */ if (workMask & (GLUT_EVENT_MASK_WORK | GLUT_DEVICE_MASK_WORK | GLUT_CONFIGURE_WORK | GLUT_COLORMAP_WORK | GLUT_MAP_WORK)) { #if !defined(_WIN32) /* Be sure to set event mask BEFORE map window is done. */ if (workMask & GLUT_EVENT_MASK_WORK) { long eventMask; /* Make sure children are not propogating events this window is selecting for. Be sure to do this before enabling events on the children's parent. */ if (window->children) { GLUTwindow *child = window->children; unsigned long attribMask = CWDontPropagate; XSetWindowAttributes wa; wa.do_not_propagate_mask = window->eventMask & GLUT_DONT_PROPAGATE_FILTER_MASK; if (window->eventMask & GLUT_HACK_STOP_PROPAGATE_MASK) { wa.event_mask = child->eventMask | (window->eventMask & GLUT_HACK_STOP_PROPAGATE_MASK); attribMask |= CWEventMask; } do { XChangeWindowAttributes(__glutDisplay, child->win, attribMask, &wa); child = child->siblings; } while (child); } eventMask = window->eventMask; if (window->parent && window->parent->eventMask & GLUT_HACK_STOP_PROPAGATE_MASK) eventMask |= (window->parent->eventMask & GLUT_HACK_STOP_PROPAGATE_MASK); XSelectInput(__glutDisplay, window->win, eventMask); if (window->overlay) XSelectInput(__glutDisplay, window->overlay->win, window->eventMask & GLUT_OVERLAY_EVENT_FILTER_MASK); } #endif /* !_WIN32 */ /* Be sure to set device mask BEFORE map window is done. */ if (workMask & GLUT_DEVICE_MASK_WORK) { __glutUpdateInputDeviceMaskFunc(window); } /* Be sure to configure window BEFORE map window is done. */ if (workMask & GLUT_CONFIGURE_WORK) { #if defined(_WIN32) RECT changes; POINT point; UINT flags = SWP_NOACTIVATE | SWP_NOMOVE | SWP_NOOWNERZORDER | SWP_NOSENDCHANGING | SWP_NOSIZE | SWP_NOZORDER; GetClientRect(window->win, &changes); /* If this window is a toplevel window, translate the 0,0 client coordinate into a screen coordinate for proper placement. */ if (!window->parent) { point.x = 0; point.y = 0; ClientToScreen(window->win, &point); changes.left = point.x; changes.top = point.y; } if (window->desiredConfMask & (CWX | CWY)) { changes.left = window->desiredX; changes.top = window->desiredY; flags &= ~SWP_NOMOVE; } if (window->desiredConfMask & (CWWidth | CWHeight)) { changes.right = changes.left + window->desiredWidth; changes.bottom = changes.top + window->desiredHeight; flags &= ~SWP_NOSIZE; /* XXX If overlay exists, resize the overlay here, ie. if (window->overlay) ... */ } if (window->desiredConfMask & CWStackMode) { flags &= ~SWP_NOZORDER; /* XXX Overlay support might require something special here. */ } /* Adjust the window rectangle because Win32 thinks that the x, y, width & height are the WHOLE window (including decorations), whereas GLUT treats the x, y, width & height as only the CLIENT area of the window. Only do this to top level windows that are not in game mode (since game mode windows do not have any decorations). */ if (!window->parent && window != __glutGameModeWindow) { AdjustWindowRect(&changes, WS_OVERLAPPEDWINDOW | WS_CLIPSIBLINGS | WS_CLIPCHILDREN, FALSE); } /* Do the repositioning, moving, and push/pop. */ SetWindowPos(window->win, window->desiredStack == Above ? HWND_TOP : HWND_NOTOPMOST, changes.left, changes.top, changes.right - changes.left, changes.bottom - changes.top, flags); /* Zero out the mask. */ window->desiredConfMask = 0; /* This hack causes the window to go back to the right position when it is taken out of fullscreen mode. */ if (workMask & GLUT_FULL_SCREEN_WORK) { window->desiredConfMask |= CWX | CWY; window->desiredX = point.x; window->desiredY = point.y; } #else /* !_WIN32 */ XWindowChanges changes; changes.x = window->desiredX; changes.y = window->desiredY; if (window->desiredConfMask & (CWWidth | CWHeight)) { changes.width = window->desiredWidth; changes.height = window->desiredHeight; if (window->overlay) XResizeWindow(__glutDisplay, window->overlay->win, window->desiredWidth, window->desiredHeight); if (__glutMotifHints != None) { if (workMask & GLUT_FULL_SCREEN_WORK) { MotifWmHints hints; hints.flags = MWM_HINTS_DECORATIONS; hints.decorations = 0; /* Absolutely no decorations. */ XChangeProperty(__glutDisplay, window->win, __glutMotifHints, __glutMotifHints, 32, PropModeReplace, (unsigned char *) &hints, 4); if (workMask & GLUT_MAP_WORK) { /* Handle case where glutFullScreen is called before the first time that the window is mapped. Some window managers will randomly or interactively position the window the first time it is mapped if the window's WM_NORMAL_HINTS property does not request an explicit position. We don't want any such window manager interaction when going fullscreen. Overwrite the WM_NORMAL_HINTS property installed by glutCreateWindow's XSetWMProperties property with one explicitly requesting a fullscreen window. */ XSizeHints hints; hints.flags = USPosition | USSize; hints.x = 0; hints.y = 0; hints.width = window->desiredWidth; hints.height = window->desiredHeight; XSetWMNormalHints(__glutDisplay, window->win, &hints); } } else { XDeleteProperty(__glutDisplay, window->win, __glutMotifHints); } } } if (window->desiredConfMask & CWStackMode) { changes.stack_mode = window->desiredStack; /* Do not let glutPushWindow push window beneath the underlay. */ if (window->parent && window->parent->overlay && window->desiredStack == Below) { changes.stack_mode = Above; changes.sibling = window->parent->overlay->win; window->desiredConfMask |= CWSibling; } } XConfigureWindow(__glutDisplay, window->win, window->desiredConfMask, &changes); window->desiredConfMask = 0; #endif } #if !defined(_WIN32) /* Be sure to establish the colormaps BEFORE map window is done. */ if (workMask & GLUT_COLORMAP_WORK) { __glutEstablishColormapsProperty(window); } #endif if (workMask & GLUT_MAP_WORK) { switch (window->desiredMapState) { case WithdrawnState: if (window->parent) { XUnmapWindow(__glutDisplay, window->win); } else { XWithdrawWindow(__glutDisplay, window->win, __glutScreen); } window->shownState = 0; break; case NormalState: XMapWindow(__glutDisplay, window->win); window->shownState = 1; break; #ifdef _WIN32 case GameModeState: /* Not an Xlib value. */ ShowWindow(window->win, SW_SHOW); window->shownState = 1; break; #endif case IconicState: XIconifyWindow(__glutDisplay, window->win, __glutScreen); window->shownState = 0; break; } } } if (workMask & (GLUT_REDISPLAY_WORK | GLUT_OVERLAY_REDISPLAY_WORK | GLUT_REPAIR_WORK | GLUT_OVERLAY_REPAIR_WORK)) { if (window->forceReshape) { /* Guarantee that before a display callback is generated for a window, a reshape callback must be generated. */ __glutSetWindow(window); window->reshape(window->width, window->height); window->forceReshape = False; /* Setting the redisplay bit on the first reshape is necessary to make the "Mesa glXSwapBuffers to repair damage" hack operate correctly. Without indicating a redisplay is necessary, there's not an initial back buffer render from which to blit from when damage happens to the window. */ workMask |= GLUT_REDISPLAY_WORK; } /* The code below is more involved than otherwise necessary because it is paranoid about the overlay or entire window being removed or destroyed in the course of the callbacks. Notice how the global __glutWindowDamaged is used to record the layers' damage status. See the code in glutLayerGet for how __glutWindowDamaged is used. The point is to not have to update the "damaged" field after the callback since the window (or overlay) may be destroyed (or removed) when the callback returns. */ if (window->overlay && window->overlay->display) { int num = window->num; Window xid = window->overlay ? window->overlay->win : None; /* If an overlay display callback is registered, we differentiate between a redisplay needed for the overlay and/or normal plane. If there is no overlay display callback registered, we simply use the standard display callback. */ if (workMask & (GLUT_REDISPLAY_WORK | GLUT_REPAIR_WORK)) { if (__glutMesaSwapHackSupport) { if (window->usedSwapBuffers) { if ((workMask & (GLUT_REPAIR_WORK | GLUT_REDISPLAY_WORK)) == GLUT_REPAIR_WORK) { SWAP_BUFFERS_WINDOW(window); goto skippedDisplayCallback1; } } } /* Render to normal plane. */ #ifdef _WIN32 window->renderDc = window->hdc; #endif window->renderWin = window->win; window->renderCtx = window->ctx; __glutWindowDamaged = (workMask & GLUT_REPAIR_WORK); __glutSetWindow(window); window->usedSwapBuffers = 0; window->display(); __glutWindowDamaged = 0; skippedDisplayCallback1:; } if (workMask & (GLUT_OVERLAY_REDISPLAY_WORK | GLUT_OVERLAY_REPAIR_WORK)) { window = __glutWindowList[num]; if (window && window->overlay && window->overlay->win == xid && window->overlay->display) { /* Render to overlay. */ #ifdef _WIN32 window->renderDc = window->overlay->hdc; #endif window->renderWin = window->overlay->win; window->renderCtx = window->overlay->ctx; __glutWindowDamaged = (workMask & GLUT_OVERLAY_REPAIR_WORK); __glutSetWindow(window); window->overlay->display(); __glutWindowDamaged = 0; } else { /* Overlay may have since been destroyed or the overlay callback may have been disabled during normal display callback. */ } } } else { if (__glutMesaSwapHackSupport) { if (!window->overlay && window->usedSwapBuffers) { if ((workMask & (GLUT_REPAIR_WORK | GLUT_REDISPLAY_WORK)) == GLUT_REPAIR_WORK) { SWAP_BUFFERS_WINDOW(window); goto skippedDisplayCallback2; } } } /* Render to normal plane (and possibly overlay). */ __glutWindowDamaged = (workMask & (GLUT_OVERLAY_REPAIR_WORK | GLUT_REPAIR_WORK)); __glutSetWindow(window); window->usedSwapBuffers = 0; window->display(); __glutWindowDamaged = 0; skippedDisplayCallback2:; } } /* Combine workMask with window->workMask to determine what finish and debug work there is. */ assert(window); workMask |= window->workMask; if (workMask & GLUT_FINISH_WORK) { /* Finish work makes sure a glFinish gets done to indirect rendering contexts. Indirect contexts tend to have much longer latency because lots of OpenGL extension requests can queue up in the X protocol stream. __glutSetWindow is where the finish works gets queued for indirect contexts. */ __glutSetWindow(window); #if !defined(_WIN32) if (!window->isDirect) #endif { glFinish(); } } if (workMask & GLUT_DEBUG_WORK) { __glutSetWindow(window); glutReportErrors(); } /* Strip out dummy, finish, and debug work bits. */ window->workMask &= ~(GLUT_DUMMY_WORK | GLUT_FINISH_WORK | GLUT_DEBUG_WORK); if (window->workMask) { /* Leave on work list. */ return window; } else { /* Remove current window from work list. */ return window->prevWorkWin; } } static /* X11 implementations do not need this global. */ void __glutProcessWindowWorkLists(void) { if (__glutWindowWorkList) { GLUTwindow *remainder, *work; work = __glutWindowWorkList; __glutWindowWorkList = NULL; if (work) { remainder = processWindowWorkList(work); if (remainder) { *beforeEnd = __glutWindowWorkList; __glutWindowWorkList = remainder; } } } } /* CENTRY */ void GLUTAPIENTRY glutMainLoop(void) { #if !defined(_WIN32) if (!__glutDisplay) __glutFatalUsage("main loop entered with out proper initialization."); #endif if (!__glutWindowListSize) __glutFatalUsage( "main loop entered with no windows created."); for (;;) { __glutProcessWindowWorkLists(); if (__glutIdleFunc || __glutWindowWorkList) { idleWait(); } else { if (__glutTimerList) { waitForSomething(); } else { processEventsAndTimeouts(); } } } } /* ENDCENTRY */