/*
 * Copyright © 2017 Broadcom
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 */

#include "util/u_format.h"
#include "vc5_context.h"
#include "vc5_tiling.h"
#include "broadcom/common/v3d_macros.h"
#include "broadcom/cle/v3dx_pack.h"

#define PIPE_CLEAR_COLOR_BUFFERS (PIPE_CLEAR_COLOR0 |                   \
                                  PIPE_CLEAR_COLOR1 |                   \
                                  PIPE_CLEAR_COLOR2 |                   \
                                  PIPE_CLEAR_COLOR3)                    \

#define PIPE_FIRST_COLOR_BUFFER_BIT (ffs(PIPE_CLEAR_COLOR0) - 1)

/* The HW queues up the load until the tile coordinates show up, but can only
 * track one at a time.  If we need to do more than one load, then we need to
 * flush out the previous load by emitting the tile coordinates and doing a
 * dummy store.
 */
static void
flush_last_load(struct vc5_cl *cl)
{
        if (V3D_VERSION >= 40)
                return;

        cl_emit(cl, TILE_COORDINATES_IMPLICIT, coords);
        cl_emit(cl, STORE_TILE_BUFFER_GENERAL, store) {
                store.buffer_to_store = NONE;
        }
}

static void
load_general(struct vc5_cl *cl, struct pipe_surface *psurf, int buffer,
             uint32_t pipe_bit, uint32_t *loads_pending)
{
        struct vc5_surface *surf = vc5_surface(psurf);
        bool separate_stencil = surf->separate_stencil && buffer == STENCIL;
        if (separate_stencil) {
                psurf = surf->separate_stencil;
                surf = vc5_surface(psurf);
        }

        struct vc5_resource *rsc = vc5_resource(psurf->texture);

        cl_emit(cl, LOAD_TILE_BUFFER_GENERAL, load) {
                load.buffer_to_load = buffer;
                load.address = cl_address(rsc->bo, surf->offset);

#if V3D_VERSION >= 40
                load.memory_format = surf->tiling;
                if (separate_stencil)
                        load.input_image_format = V3D_OUTPUT_IMAGE_FORMAT_S8;
                else
                        load.input_image_format = surf->format;

                if (surf->tiling == VC5_TILING_UIF_NO_XOR ||
                    surf->tiling == VC5_TILING_UIF_XOR) {
                        load.height_in_ub_or_stride =
                                surf->padded_height_of_output_image_in_uif_blocks;
                } else if (surf->tiling == VC5_TILING_RASTER) {
                        struct vc5_resource_slice *slice =
                                &rsc->slices[psurf->u.tex.level];
                        load.height_in_ub_or_stride = slice->stride;
                }

                /* XXX: MSAA */
#else /* V3D_VERSION < 40 */
                /* Can't do raw ZSTENCIL loads -- need to load/store them to
                 * separate buffers for Z and stencil.
                 */
                assert(buffer != ZSTENCIL);
                load.raw_mode = true;
                load.padded_height_of_output_image_in_uif_blocks =
                        surf->padded_height_of_output_image_in_uif_blocks;
#endif /* V3D_VERSION < 40 */
        }

        *loads_pending &= ~pipe_bit;
        if (*loads_pending)
                flush_last_load(cl);
}

static void
store_general(struct vc5_job *job,
              struct vc5_cl *cl, struct pipe_surface *psurf, int buffer,
              int pipe_bit, uint32_t *stores_pending, bool general_color_clear)
{
        struct vc5_surface *surf = vc5_surface(psurf);
        bool separate_stencil = surf->separate_stencil && buffer == STENCIL;
        if (separate_stencil) {
                psurf = surf->separate_stencil;
                surf = vc5_surface(psurf);
        }

        *stores_pending &= ~pipe_bit;
        bool last_store = !(*stores_pending);

        struct vc5_resource *rsc = vc5_resource(psurf->texture);

        rsc->writes++;

        cl_emit(cl, STORE_TILE_BUFFER_GENERAL, store) {
                store.buffer_to_store = buffer;
                store.address = cl_address(rsc->bo, surf->offset);

#if V3D_VERSION >= 40
                store.clear_buffer_being_stored =
                        ((job->cleared & pipe_bit) &&
                         (general_color_clear ||
                          !(pipe_bit & PIPE_CLEAR_COLOR_BUFFERS)));

                if (separate_stencil)
                        store.output_image_format = V3D_OUTPUT_IMAGE_FORMAT_S8;
                else
                        store.output_image_format = surf->format;

                store.memory_format = surf->tiling;

                if (surf->tiling == VC5_TILING_UIF_NO_XOR ||
                    surf->tiling == VC5_TILING_UIF_XOR) {
                        store.height_in_ub_or_stride =
                                surf->padded_height_of_output_image_in_uif_blocks;
                } else if (surf->tiling == VC5_TILING_RASTER) {
                        struct vc5_resource_slice *slice =
                                &rsc->slices[psurf->u.tex.level];
                        store.height_in_ub_or_stride = slice->stride;
                }
#else /* V3D_VERSION < 40 */
                /* Can't do raw ZSTENCIL stores -- need to load/store them to
                 * separate buffers for Z and stencil.
                 */
                assert(buffer != ZSTENCIL);
                store.raw_mode = true;
                if (!last_store) {
                        store.disable_colour_buffers_clear_on_write = true;
                        store.disable_z_buffer_clear_on_write = true;
                        store.disable_stencil_buffer_clear_on_write = true;
                } else {
                        store.disable_colour_buffers_clear_on_write =
                                !(((pipe_bit & PIPE_CLEAR_COLOR_BUFFERS) &&
                                   general_color_clear &&
                                   (job->cleared & pipe_bit)));
                        store.disable_z_buffer_clear_on_write =
                                !(job->cleared & PIPE_CLEAR_DEPTH);
                        store.disable_stencil_buffer_clear_on_write =
                                !(job->cleared & PIPE_CLEAR_STENCIL);
                }
                store.padded_height_of_output_image_in_uif_blocks =
                        surf->padded_height_of_output_image_in_uif_blocks;
#endif /* V3D_VERSION < 40 */
        }

        /* There must be a TILE_COORDINATES_IMPLICIT between each store. */
        if (V3D_VERSION < 40 && !last_store) {
                cl_emit(cl, TILE_COORDINATES_IMPLICIT, coords);
        }
}

static int
zs_buffer_from_pipe_bits(int pipe_clear_bits)
{
        switch (pipe_clear_bits & PIPE_CLEAR_DEPTHSTENCIL) {
        case PIPE_CLEAR_DEPTHSTENCIL:
                return ZSTENCIL;
        case PIPE_CLEAR_DEPTH:
                return Z;
        case PIPE_CLEAR_STENCIL:
                return STENCIL;
        default:
                return NONE;
        }
}

static void
vc5_rcl_emit_loads(struct vc5_job *job, struct vc5_cl *cl)
{
        uint32_t loads_pending = job->resolve & ~job->cleared;

        for (int i = 0; i < VC5_MAX_DRAW_BUFFERS; i++) {
                uint32_t bit = PIPE_CLEAR_COLOR0 << i;
                if (!(loads_pending & bit))
                        continue;

                struct pipe_surface *psurf = job->cbufs[i];
                if (!psurf || (V3D_VERSION < 40 &&
                               psurf->texture->nr_samples <= 1)) {
                        continue;
                }

                load_general(cl, psurf, RENDER_TARGET_0 + i,
                             bit, &loads_pending);
        }

        if ((loads_pending & PIPE_CLEAR_DEPTHSTENCIL) &&
            (V3D_VERSION >= 40 ||
             (job->zsbuf && job->zsbuf->texture->nr_samples > 1))) {
                load_general(cl, job->zsbuf,
                             zs_buffer_from_pipe_bits(loads_pending),
                             PIPE_CLEAR_DEPTHSTENCIL,
                             &loads_pending);
        }

#if V3D_VERSION < 40
        /* The initial reload will be queued until we get the
         * tile coordinates.
         */
        if (loads_pending) {
                cl_emit(cl, RELOAD_TILE_COLOUR_BUFFER, load) {
                        load.disable_colour_buffer_load =
                                (~loads_pending &
                                 PIPE_CLEAR_COLOR_BUFFERS) >>
                                PIPE_FIRST_COLOR_BUFFER_BIT;
                        load.enable_z_load =
                                loads_pending & PIPE_CLEAR_DEPTH;
                        load.enable_stencil_load =
                                loads_pending & PIPE_CLEAR_STENCIL;
                }
        }
#else /* V3D_VERSION >= 40 */
        assert(!loads_pending);
        cl_emit(cl, END_OF_LOADS, end);
#endif
}

static void
vc5_rcl_emit_stores(struct vc5_job *job, struct vc5_cl *cl)
{
        MAYBE_UNUSED bool needs_color_clear = job->cleared & PIPE_CLEAR_COLOR_BUFFERS;
        MAYBE_UNUSED bool needs_z_clear = job->cleared & PIPE_CLEAR_DEPTH;
        MAYBE_UNUSED bool needs_s_clear = job->cleared & PIPE_CLEAR_STENCIL;

        /* For clearing color in a TLB general on V3D 3.3:
         *
         * - NONE buffer store clears all TLB color buffers.
         * - color buffer store clears just the TLB color buffer being stored.
         * - Z/S buffers store may not clear the TLB color buffer.
         *
         * And on V3D 4.1, we only have one flag for "clear the buffer being
         * stored" in the general packet, and a separate packet to clear all
         * color TLB buffers.
         *
         * As a result, we only bother flagging TLB color clears in a general
         * packet when we don't have to emit a separate packet to clear all
         * TLB color buffers.
         */
        bool general_color_clear = (needs_color_clear &&
                                    (job->cleared & PIPE_CLEAR_COLOR_BUFFERS) ==
                                    (job->resolve & PIPE_CLEAR_COLOR_BUFFERS));

        uint32_t stores_pending = job->resolve;

        /* For V3D 4.1, use general stores for all TLB stores.
         *
         * For V3D 3.3, we only use general stores to do raw stores for any
         * MSAA surfaces.  These output UIF tiled images where each 4x MSAA
         * pixel is a 2x2 quad, and the format will be that of the
         * internal_type/internal_bpp, rather than the format from GL's
         * perspective.  Non-MSAA surfaces will use
         * STORE_MULTI_SAMPLE_RESOLVED_TILE_COLOR_BUFFER_EXTENDED.
         */
        for (int i = 0; i < VC5_MAX_DRAW_BUFFERS; i++) {
                uint32_t bit = PIPE_CLEAR_COLOR0 << i;
                if (!(job->resolve & bit))
                        continue;

                struct pipe_surface *psurf = job->cbufs[i];
                if (!psurf ||
                    (V3D_VERSION < 40 && psurf->texture->nr_samples <= 1)) {
                        continue;
                }

                store_general(job, cl, psurf, RENDER_TARGET_0 + i, bit,
                              &stores_pending, general_color_clear);
        }

        if (job->resolve & PIPE_CLEAR_DEPTHSTENCIL && job->zsbuf &&
            !(V3D_VERSION < 40 && job->zsbuf->texture->nr_samples <= 1)) {
                struct vc5_resource *rsc = vc5_resource(job->zsbuf->texture);
                if (rsc->separate_stencil) {
                        if (job->resolve & PIPE_CLEAR_DEPTH) {
                                store_general(job, cl, job->zsbuf, Z,
                                              PIPE_CLEAR_DEPTH,
                                              &stores_pending,
                                              general_color_clear);
                        }

                        if (job->resolve & PIPE_CLEAR_STENCIL) {
                                store_general(job, cl, job->zsbuf, STENCIL,
                                              PIPE_CLEAR_STENCIL,
                                              &stores_pending,
                                              general_color_clear);
                        }
                } else {
                        store_general(job, cl, job->zsbuf,
                                      zs_buffer_from_pipe_bits(job->resolve),
                                      job->resolve & PIPE_CLEAR_DEPTHSTENCIL,
                                      &stores_pending, general_color_clear);
                }
        }

        if (stores_pending) {
#if V3D_VERSION < 40
                cl_emit(cl, STORE_MULTI_SAMPLE_RESOLVED_TILE_COLOR_BUFFER_EXTENDED, store) {

                        store.disable_color_buffer_write =
                                (~stores_pending >>
                                 PIPE_FIRST_COLOR_BUFFER_BIT) & 0xf;
                        store.enable_z_write = stores_pending & PIPE_CLEAR_DEPTH;
                        store.enable_stencil_write = stores_pending & PIPE_CLEAR_STENCIL;

                        /* Note that when set this will clear all of the color
                         * buffers.
                         */
                        store.disable_colour_buffers_clear_on_write =
                                !needs_color_clear;
                        store.disable_z_buffer_clear_on_write =
                                !needs_z_clear;
                        store.disable_stencil_buffer_clear_on_write =
                                !needs_s_clear;
                };
#else /* V3D_VERSION >= 40 */
                unreachable("All color buffers should have been stored.");
#endif /* V3D_VERSION >= 40 */
        } else if (needs_color_clear && !general_color_clear) {
                /* If we didn't do our color clears in the general packet,
                 * then emit a packet to clear all the TLB color buffers now.
                 */
#if V3D_VERSION < 40
                cl_emit(cl, STORE_TILE_BUFFER_GENERAL, store) {
                        store.buffer_to_store = NONE;
                }
#else /* V3D_VERSION >= 40 */
                cl_emit(cl, CLEAR_TILE_BUFFERS, clear) {
                        clear.clear_all_render_targets = true;
                }
#endif /* V3D_VERSION >= 40 */
        }
}

static void
vc5_rcl_emit_generic_per_tile_list(struct vc5_job *job, int last_cbuf)
{
        /* Emit the generic list in our indirect state -- the rcl will just
         * have pointers into it.
         */
        struct vc5_cl *cl = &job->indirect;
        vc5_cl_ensure_space(cl, 200, 1);
        struct vc5_cl_reloc tile_list_start = cl_get_address(cl);

        if (V3D_VERSION >= 40) {
                /* V3D 4.x only requires a single tile coordinates, and
                 * END_OF_LOADS switches us between loading and rendering.
                 */
                cl_emit(cl, TILE_COORDINATES_IMPLICIT, coords);
        }

        vc5_rcl_emit_loads(job, cl);

        if (V3D_VERSION < 40) {
                /* Tile Coordinates triggers the last reload and sets where
                 * the stores go. There must be one per store packet.
                 */
                cl_emit(cl, TILE_COORDINATES_IMPLICIT, coords);
        }

        /* The binner starts out writing tiles assuming that the initial mode
         * is triangles, so make sure that's the case.
         */
        cl_emit(cl, PRIMITIVE_LIST_FORMAT, fmt) {
                fmt.data_type = LIST_INDEXED;
                fmt.primitive_type = LIST_TRIANGLES;
        }

        cl_emit(cl, BRANCH_TO_IMPLICIT_TILE_LIST, branch);

        vc5_rcl_emit_stores(job, cl);

#if V3D_VERSION >= 40
        cl_emit(cl, END_OF_TILE_MARKER, end);
#endif

        cl_emit(cl, RETURN_FROM_SUB_LIST, ret);

        cl_emit(&job->rcl, START_ADDRESS_OF_GENERIC_TILE_LIST, branch) {
                branch.start = tile_list_start;
                branch.end = cl_get_address(cl);
        }
}

#if V3D_VERSION >= 40
static void
v3d_setup_render_target(struct vc5_job *job, int cbuf,
                        uint32_t *rt_bpp, uint32_t *rt_type, uint32_t *rt_clamp)
{
        if (!job->cbufs[cbuf])
                return;

        struct vc5_surface *surf = vc5_surface(job->cbufs[cbuf]);
        *rt_bpp = surf->internal_bpp;
        *rt_type = surf->internal_type;
        *rt_clamp = V3D_RENDER_TARGET_CLAMP_NONE;
}

#else /* V3D_VERSION < 40 */

static void
v3d_emit_z_stencil_config(struct vc5_job *job, struct vc5_surface *surf,
                          struct vc5_resource *rsc, bool is_separate_stencil)
{
        cl_emit(&job->rcl, TILE_RENDERING_MODE_CONFIGURATION_Z_STENCIL_CONFIG, zs) {
                zs.address = cl_address(rsc->bo, surf->offset);

                if (!is_separate_stencil) {
                        zs.internal_type = surf->internal_type;
                        zs.output_image_format = surf->format;
                } else {
                        zs.z_stencil_id = 1; /* Separate stencil */
                }

                zs.padded_height_of_output_image_in_uif_blocks =
                        surf->padded_height_of_output_image_in_uif_blocks;

                assert(surf->tiling != VC5_TILING_RASTER);
                zs.memory_format = surf->tiling;
        }

        if (job->resolve & (is_separate_stencil ?
                            PIPE_CLEAR_STENCIL :
                            PIPE_CLEAR_DEPTHSTENCIL)) {
                rsc->writes++;
        }
}
#endif /* V3D_VERSION < 40 */

#define div_round_up(a, b) (((a) + (b) - 1) / b)

void
v3dX(emit_rcl)(struct vc5_job *job)
{
        /* The RCL list should be empty. */
        assert(!job->rcl.bo);

        vc5_cl_ensure_space_with_branch(&job->rcl, 200 + 256 *
                                        cl_packet_length(SUPERTILE_COORDINATES));
        job->submit.rcl_start = job->rcl.bo->offset;
        vc5_job_add_bo(job, job->rcl.bo);

        int nr_cbufs = 0;
        for (int i = 0; i < VC5_MAX_DRAW_BUFFERS; i++) {
                if (job->cbufs[i])
                        nr_cbufs = i + 1;
        }

        /* Comon config must be the first TILE_RENDERING_MODE_CONFIGURATION
         * and Z_STENCIL_CLEAR_VALUES must be last.  The ones in between are
         * optional updates to the previous HW state.
         */
        cl_emit(&job->rcl, TILE_RENDERING_MODE_CONFIGURATION_COMMON_CONFIGURATION,
                config) {
#if V3D_VERSION < 40
                config.enable_z_store = job->resolve & PIPE_CLEAR_DEPTH;
                config.enable_stencil_store = job->resolve & PIPE_CLEAR_STENCIL;
#else /* V3D_VERSION >= 40 */
                if (job->zsbuf) {
                        struct vc5_surface *surf = vc5_surface(job->zsbuf);
                        config.internal_depth_type = surf->internal_type;
                }
#endif /* V3D_VERSION >= 40 */

                /* XXX: Early D/S clear */

                switch (job->first_ez_state) {
                case VC5_EZ_UNDECIDED:
                case VC5_EZ_LT_LE:
                        config.early_z_disable = false;
                        config.early_z_test_and_update_direction =
                                EARLY_Z_DIRECTION_LT_LE;
                        break;
                case VC5_EZ_GT_GE:
                        config.early_z_disable = false;
                        config.early_z_test_and_update_direction =
                                EARLY_Z_DIRECTION_GT_GE;
                        break;
                case VC5_EZ_DISABLED:
                        config.early_z_disable = true;
                }

                config.image_width_pixels = job->draw_width;
                config.image_height_pixels = job->draw_height;

                config.number_of_render_targets_minus_1 =
                        MAX2(nr_cbufs, 1) - 1;

                config.multisample_mode_4x = job->msaa;

                config.maximum_bpp_of_all_render_targets = job->internal_bpp;
        }

        for (int i = 0; i < nr_cbufs; i++) {
                struct pipe_surface *psurf = job->cbufs[i];
                if (!psurf)
                        continue;
                struct vc5_surface *surf = vc5_surface(psurf);
                struct vc5_resource *rsc = vc5_resource(psurf->texture);

                MAYBE_UNUSED uint32_t config_pad = 0;
                uint32_t clear_pad = 0;

                /* XXX: Set the pad for raster. */
                if (surf->tiling == VC5_TILING_UIF_NO_XOR ||
                    surf->tiling == VC5_TILING_UIF_XOR) {
                        int uif_block_height = vc5_utile_height(rsc->cpp) * 2;
                        uint32_t implicit_padded_height = (align(job->draw_height, uif_block_height) /
                                                           uif_block_height);
                        if (surf->padded_height_of_output_image_in_uif_blocks -
                            implicit_padded_height < 15) {
                                config_pad = (surf->padded_height_of_output_image_in_uif_blocks -
                                              implicit_padded_height);
                        } else {
                                config_pad = 15;
                                clear_pad = surf->padded_height_of_output_image_in_uif_blocks;
                        }
                }

#if V3D_VERSION < 40
                cl_emit(&job->rcl, TILE_RENDERING_MODE_CONFIGURATION_RENDER_TARGET_CONFIG, rt) {
                        rt.address = cl_address(rsc->bo, surf->offset);
                        rt.internal_type = surf->internal_type;
                        rt.output_image_format = surf->format;
                        rt.memory_format = surf->tiling;
                        rt.internal_bpp = surf->internal_bpp;
                        rt.render_target_number = i;
                        rt.pad = config_pad;

                        if (job->resolve & PIPE_CLEAR_COLOR0 << i)
                                rsc->writes++;
                }
#endif /* V3D_VERSION < 40 */

                cl_emit(&job->rcl, TILE_RENDERING_MODE_CONFIGURATION_CLEAR_COLORS_PART1,
                        clear) {
                        clear.clear_color_low_32_bits = job->clear_color[i][0];
                        clear.clear_color_next_24_bits = job->clear_color[i][1] & 0xffffff;
                        clear.render_target_number = i;
                };

                if (surf->internal_bpp >= V3D_INTERNAL_BPP_64) {
                        cl_emit(&job->rcl, TILE_RENDERING_MODE_CONFIGURATION_CLEAR_COLORS_PART2,
                                clear) {
                                clear.clear_color_mid_low_32_bits =
                                        ((job->clear_color[i][1] >> 24) |
                                         (job->clear_color[i][2] << 8));
                                clear.clear_color_mid_high_24_bits =
                                        ((job->clear_color[i][2] >> 24) |
                                         ((job->clear_color[i][3] & 0xffff) << 8));
                                clear.render_target_number = i;
                        };
                }

                if (surf->internal_bpp >= V3D_INTERNAL_BPP_128 || clear_pad) {
                        cl_emit(&job->rcl, TILE_RENDERING_MODE_CONFIGURATION_CLEAR_COLORS_PART3,
                                clear) {
                                clear.uif_padded_height_in_uif_blocks = clear_pad;
                                clear.clear_color_high_16_bits = job->clear_color[i][3] >> 16;
                                clear.render_target_number = i;
                        };
                }
        }

#if V3D_VERSION >= 40
        cl_emit(&job->rcl, TILE_RENDERING_MODE_CONFIGURATION_RENDER_TARGET_CONFIG, rt) {
                v3d_setup_render_target(job, 0,
                                        &rt.render_target_0_internal_bpp,
                                        &rt.render_target_0_internal_type,
                                        &rt.render_target_0_clamp);
                v3d_setup_render_target(job, 1,
                                        &rt.render_target_1_internal_bpp,
                                        &rt.render_target_1_internal_type,
                                        &rt.render_target_1_clamp);
                v3d_setup_render_target(job, 2,
                                        &rt.render_target_2_internal_bpp,
                                        &rt.render_target_2_internal_type,
                                        &rt.render_target_2_clamp);
                v3d_setup_render_target(job, 3,
                                        &rt.render_target_3_internal_bpp,
                                        &rt.render_target_3_internal_type,
                                        &rt.render_target_3_clamp);
        }
#endif

#if V3D_VERSION < 40
        /* TODO: Don't bother emitting if we don't load/clear Z/S. */
        if (job->zsbuf) {
                struct pipe_surface *psurf = job->zsbuf;
                struct vc5_surface *surf = vc5_surface(psurf);
                struct vc5_resource *rsc = vc5_resource(psurf->texture);

                v3d_emit_z_stencil_config(job, surf, rsc, false);

                /* Emit the separate stencil packet if we have a resource for
                 * it.  The HW will only load/store this buffer if the
                 * Z/Stencil config doesn't have stencil in its format.
                 */
                if (surf->separate_stencil) {
                        v3d_emit_z_stencil_config(job,
                                                  vc5_surface(surf->separate_stencil),
                                                  rsc->separate_stencil, true);
                }
        }
#endif /* V3D_VERSION < 40 */

        /* Ends rendering mode config. */
        cl_emit(&job->rcl, TILE_RENDERING_MODE_CONFIGURATION_Z_STENCIL_CLEAR_VALUES,
                clear) {
                clear.z_clear_value = job->clear_z;
                clear.stencil_vg_mask_clear_value = job->clear_s;
        };

        /* Always set initial block size before the first branch, which needs
         * to match the value from binning mode config.
         */
        cl_emit(&job->rcl, TILE_LIST_INITIAL_BLOCK_SIZE, init) {
                init.use_auto_chained_tile_lists = true;
                init.size_of_first_block_in_chained_tile_lists =
                        TILE_ALLOCATION_BLOCK_SIZE_64B;
        }

        uint32_t supertile_w = 1, supertile_h = 1;

        /* If doing multicore binning, we would need to initialize each core's
         * tile list here.
         */
        cl_emit(&job->rcl, MULTICORE_RENDERING_TILE_LIST_SET_BASE, list) {
                list.address = cl_address(job->tile_alloc, 0);
        }

        cl_emit(&job->rcl, MULTICORE_RENDERING_SUPERTILE_CONFIGURATION, config) {
                uint32_t frame_w_in_supertiles, frame_h_in_supertiles;
                const uint32_t max_supertiles = 256;

                /* Size up our supertiles until we get under the limit. */
                for (;;) {
                        frame_w_in_supertiles = div_round_up(job->draw_tiles_x,
                                                             supertile_w);
                        frame_h_in_supertiles = div_round_up(job->draw_tiles_y,
                                                             supertile_h);
                        if (frame_w_in_supertiles * frame_h_in_supertiles <
                            max_supertiles) {
                                break;
                        }

                        if (supertile_w < supertile_h)
                                supertile_w++;
                        else
                                supertile_h++;
                }

                config.total_frame_width_in_tiles = job->draw_tiles_x;
                config.total_frame_height_in_tiles = job->draw_tiles_y;

                config.supertile_width_in_tiles_minus_1 = supertile_w - 1;
                config.supertile_height_in_tiles_minus_1 = supertile_h - 1;

                config.total_frame_width_in_supertiles = frame_w_in_supertiles;
                config.total_frame_height_in_supertiles = frame_h_in_supertiles;
        }

        /* Start by clearing the tile buffer. */
        cl_emit(&job->rcl, TILE_COORDINATES, coords) {
                coords.tile_column_number = 0;
                coords.tile_row_number = 0;
        }

#if V3D_VERSION < 40
        cl_emit(&job->rcl, STORE_TILE_BUFFER_GENERAL, store) {
                store.buffer_to_store = NONE;
        }
#else
        cl_emit(&job->rcl, END_OF_LOADS, end);
        cl_emit(&job->rcl, STORE_TILE_BUFFER_GENERAL, store) {
                store.buffer_to_store = NONE;
        }
        cl_emit(&job->rcl, CLEAR_TILE_BUFFERS, clear) {
                clear.clear_z_stencil_buffer = true;
                clear.clear_all_render_targets = true;
        }
        cl_emit(&job->rcl, END_OF_TILE_MARKER, end);
#endif

        cl_emit(&job->rcl, FLUSH_VCD_CACHE, flush);

        vc5_rcl_emit_generic_per_tile_list(job, nr_cbufs - 1);

        cl_emit(&job->rcl, WAIT_ON_SEMAPHORE, sem);

        /* XXX: Use Morton order */
        uint32_t supertile_w_in_pixels = job->tile_width * supertile_w;
        uint32_t supertile_h_in_pixels = job->tile_height * supertile_h;
        uint32_t min_x_supertile = job->draw_min_x / supertile_w_in_pixels;
        uint32_t min_y_supertile = job->draw_min_y / supertile_h_in_pixels;

        uint32_t max_x_supertile = 0;
        uint32_t max_y_supertile = 0;
        if (job->draw_max_x != 0 && job->draw_max_y != 0) {
                max_x_supertile = (job->draw_max_x - 1) / supertile_w_in_pixels;
                max_y_supertile = (job->draw_max_y - 1) / supertile_h_in_pixels;
        }

        for (int y = min_y_supertile; y <= max_y_supertile; y++) {
                for (int x = min_x_supertile; x <= max_x_supertile; x++) {
                        cl_emit(&job->rcl, SUPERTILE_COORDINATES, coords) {
                                coords.column_number_in_supertiles = x;
                                coords.row_number_in_supertiles = y;
                        }
                }
        }

        cl_emit(&job->rcl, END_OF_RENDERING, end);
}