/* * Copyright © 2014 Broadcom * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. */ #include #include #include "pipe/p_defines.h" #include "util/ralloc.h" #include "util/u_inlines.h" #include "util/u_memory.h" #include "util/u_blitter.h" #include "indices/u_primconvert.h" #include "pipe/p_screen.h" #include "vc4_screen.h" #include "vc4_context.h" #include "vc4_resource.h" /** * Emits a no-op STORE_TILE_BUFFER_GENERAL. * * If we emit a PACKET_TILE_COORDINATES, it must be followed by a store of * some sort before another load is triggered. */ static void vc4_store_before_load(struct vc4_context *vc4, bool *coords_emitted) { if (!*coords_emitted) return; cl_u8(&vc4->rcl, VC4_PACKET_STORE_TILE_BUFFER_GENERAL); cl_u8(&vc4->rcl, VC4_LOADSTORE_TILE_BUFFER_NONE); cl_u8(&vc4->rcl, (VC4_STORE_TILE_BUFFER_DISABLE_COLOR_CLEAR | VC4_STORE_TILE_BUFFER_DISABLE_ZS_CLEAR | VC4_STORE_TILE_BUFFER_DISABLE_VG_MASK_CLEAR)); cl_u32(&vc4->rcl, 0); /* no address, since we're in None mode */ *coords_emitted = false; } /** * Emits a PACKET_TILE_COORDINATES if one isn't already pending. * * The tile coordinates packet triggers a pending load if there is one, are * used for clipping during rendering, and determine where loads/stores happen * relative to their base address. */ static void vc4_tile_coordinates(struct vc4_context *vc4, uint32_t x, uint32_t y, bool *coords_emitted) { if (*coords_emitted) return; cl_u8(&vc4->rcl, VC4_PACKET_TILE_COORDINATES); cl_u8(&vc4->rcl, x); cl_u8(&vc4->rcl, y); *coords_emitted = true; } static void vc4_setup_rcl(struct vc4_context *vc4) { struct vc4_surface *csurf = vc4_surface(vc4->framebuffer.cbufs[0]); struct vc4_resource *ctex = csurf ? vc4_resource(csurf->base.texture) : NULL; struct vc4_surface *zsurf = vc4_surface(vc4->framebuffer.zsbuf); struct vc4_resource *ztex = zsurf ? vc4_resource(zsurf->base.texture) : NULL; if (!csurf) vc4->resolve &= ~PIPE_CLEAR_COLOR0; if (!zsurf) vc4->resolve &= ~(PIPE_CLEAR_DEPTH | PIPE_CLEAR_STENCIL); uint32_t resolve_uncleared = vc4->resolve & ~vc4->cleared; uint32_t width = vc4->framebuffer.width; uint32_t height = vc4->framebuffer.height; uint32_t stride_in_tiles = align(width, 64) / 64; assert(vc4->draw_min_x != ~0 && vc4->draw_min_y != ~0); uint32_t min_x_tile = vc4->draw_min_x / 64; uint32_t min_y_tile = vc4->draw_min_y / 64; uint32_t max_x_tile = (vc4->draw_max_x - 1) / 64; uint32_t max_y_tile = (vc4->draw_max_y - 1) / 64; uint32_t xtiles = max_x_tile - min_x_tile + 1; uint32_t ytiles = max_y_tile - min_y_tile + 1; #if 0 fprintf(stderr, "RCL: resolve 0x%x clear 0x%x resolve uncleared 0x%x\n", vc4->resolve, vc4->cleared, resolve_uncleared); #endif uint32_t reloc_size = 9; uint32_t clear_size = 14; uint32_t config_size = 11 + reloc_size; uint32_t loadstore_size = 7 + reloc_size; uint32_t tilecoords_size = 3; uint32_t branch_size = 5 + reloc_size; uint32_t color_store_size = 1; uint32_t semaphore_size = 1; cl_ensure_space(&vc4->rcl, clear_size + config_size + loadstore_size + semaphore_size + xtiles * ytiles * (loadstore_size * 4 + tilecoords_size * 3 + branch_size + color_store_size)); cl_u8(&vc4->rcl, VC4_PACKET_CLEAR_COLORS); cl_u32(&vc4->rcl, vc4->clear_color[0]); cl_u32(&vc4->rcl, vc4->clear_color[1]); cl_u32(&vc4->rcl, vc4->clear_depth); cl_u8(&vc4->rcl, vc4->clear_stencil); /* The rendering mode config determines the pointer that's used for * VC4_PACKET_STORE_MS_TILE_BUFFER address computations. The kernel * could handle a no-relocation rendering mode config and deny those * packets, but instead we just tell the kernel we're doing our color * rendering to the Z buffer, and just don't emit any of those * packets. */ struct vc4_surface *render_surf = csurf ? csurf : zsurf; struct vc4_resource *render_tex = vc4_resource(render_surf->base.texture); cl_start_reloc(&vc4->rcl, 1); cl_u8(&vc4->rcl, VC4_PACKET_TILE_RENDERING_MODE_CONFIG); cl_reloc(vc4, &vc4->rcl, render_tex->bo, render_surf->offset); cl_u16(&vc4->rcl, width); cl_u16(&vc4->rcl, height); cl_u16(&vc4->rcl, ((render_surf->tiling << VC4_RENDER_CONFIG_MEMORY_FORMAT_SHIFT) | (vc4_rt_format_is_565(render_surf->base.format) ? VC4_RENDER_CONFIG_FORMAT_BGR565 : VC4_RENDER_CONFIG_FORMAT_RGBA8888))); /* The tile buffer normally gets cleared when the previous tile is * stored. If the clear values changed between frames, then the tile * buffer has stale clear values in it, so we have to do a store in * None mode (no writes) so that we trigger the tile buffer clear. * * Excess clearing is only a performance cost, since per-tile contents * will be loaded/stored in the loop below. */ if (vc4->cleared & (PIPE_CLEAR_COLOR0 | PIPE_CLEAR_DEPTH | PIPE_CLEAR_STENCIL)) { cl_u8(&vc4->rcl, VC4_PACKET_TILE_COORDINATES); cl_u8(&vc4->rcl, 0); cl_u8(&vc4->rcl, 0); cl_u8(&vc4->rcl, VC4_PACKET_STORE_TILE_BUFFER_GENERAL); cl_u16(&vc4->rcl, VC4_LOADSTORE_TILE_BUFFER_NONE); cl_u32(&vc4->rcl, 0); /* no address, since we're in None mode */ } uint32_t color_hindex = ctex ? vc4_gem_hindex(vc4, ctex->bo) : 0; uint32_t depth_hindex = ztex ? vc4_gem_hindex(vc4, ztex->bo) : 0; uint32_t tile_alloc_hindex = vc4_gem_hindex(vc4, vc4->tile_alloc); for (int y = min_y_tile; y <= max_y_tile; y++) { for (int x = min_x_tile; x <= max_x_tile; x++) { bool end_of_frame = (x == max_x_tile && y == max_y_tile); bool coords_emitted = false; /* Note that the load doesn't actually occur until the * tile coords packet is processed, and only one load * may be outstanding at a time. */ if (resolve_uncleared & PIPE_CLEAR_COLOR) { vc4_store_before_load(vc4, &coords_emitted); cl_start_reloc(&vc4->rcl, 1); cl_u8(&vc4->rcl, VC4_PACKET_LOAD_TILE_BUFFER_GENERAL); cl_u8(&vc4->rcl, VC4_LOADSTORE_TILE_BUFFER_COLOR | (csurf->tiling << VC4_LOADSTORE_TILE_BUFFER_FORMAT_SHIFT)); cl_u8(&vc4->rcl, vc4_rt_format_is_565(csurf->base.format) ? VC4_LOADSTORE_TILE_BUFFER_BGR565 : VC4_LOADSTORE_TILE_BUFFER_RGBA8888); cl_reloc_hindex(&vc4->rcl, color_hindex, csurf->offset); vc4_tile_coordinates(vc4, x, y, &coords_emitted); } if (resolve_uncleared & (PIPE_CLEAR_DEPTH | PIPE_CLEAR_STENCIL)) { vc4_store_before_load(vc4, &coords_emitted); cl_start_reloc(&vc4->rcl, 1); cl_u8(&vc4->rcl, VC4_PACKET_LOAD_TILE_BUFFER_GENERAL); cl_u8(&vc4->rcl, VC4_LOADSTORE_TILE_BUFFER_ZS | (zsurf->tiling << VC4_LOADSTORE_TILE_BUFFER_FORMAT_SHIFT)); cl_u8(&vc4->rcl, 0); cl_reloc_hindex(&vc4->rcl, depth_hindex, zsurf->offset); vc4_tile_coordinates(vc4, x, y, &coords_emitted); } /* Clipping depends on tile coordinates having been * emitted, so make sure it's happened even if * everything was cleared to start. */ vc4_tile_coordinates(vc4, x, y, &coords_emitted); /* Wait for the binner before jumping to the first * tile's lists. */ if (x == min_x_tile && y == min_y_tile) cl_u8(&vc4->rcl, VC4_PACKET_WAIT_ON_SEMAPHORE); cl_start_reloc(&vc4->rcl, 1); cl_u8(&vc4->rcl, VC4_PACKET_BRANCH_TO_SUB_LIST); cl_reloc_hindex(&vc4->rcl, tile_alloc_hindex, (y * stride_in_tiles + x) * 32); if (vc4->resolve & (PIPE_CLEAR_DEPTH | PIPE_CLEAR_STENCIL)) { vc4_tile_coordinates(vc4, x, y, &coords_emitted); cl_start_reloc(&vc4->rcl, 1); cl_u8(&vc4->rcl, VC4_PACKET_STORE_TILE_BUFFER_GENERAL); cl_u8(&vc4->rcl, VC4_LOADSTORE_TILE_BUFFER_ZS | (zsurf->tiling << VC4_LOADSTORE_TILE_BUFFER_FORMAT_SHIFT)); cl_u8(&vc4->rcl, VC4_STORE_TILE_BUFFER_DISABLE_COLOR_CLEAR); cl_reloc_hindex(&vc4->rcl, depth_hindex, zsurf->offset | ((end_of_frame && !(vc4->resolve & PIPE_CLEAR_COLOR0)) ? VC4_LOADSTORE_TILE_BUFFER_EOF : 0)); coords_emitted = false; } if (vc4->resolve & PIPE_CLEAR_COLOR0) { vc4_tile_coordinates(vc4, x, y, &coords_emitted); if (end_of_frame) { cl_u8(&vc4->rcl, VC4_PACKET_STORE_MS_TILE_BUFFER_AND_EOF); } else { cl_u8(&vc4->rcl, VC4_PACKET_STORE_MS_TILE_BUFFER); } coords_emitted = false; } /* One of the bits needs to have been set that would * have triggered an EOF. */ assert(vc4->resolve & (PIPE_CLEAR_COLOR0 | PIPE_CLEAR_DEPTH | PIPE_CLEAR_STENCIL)); /* Any coords emitted must also have been consumed by * a store. */ assert(!coords_emitted); } } if (vc4->resolve & PIPE_CLEAR_COLOR0) ctex->writes++; if (vc4->resolve & (PIPE_CLEAR_DEPTH | PIPE_CLEAR_STENCIL)) ztex->writes++; } static void vc4_draw_reset(struct vc4_context *vc4) { struct vc4_bo **referenced_bos = vc4->bo_pointers.base; for (int i = 0; i < (vc4->bo_handles.next - vc4->bo_handles.base) / 4; i++) { vc4_bo_unreference(&referenced_bos[i]); } vc4_reset_cl(&vc4->bcl); vc4_reset_cl(&vc4->rcl); vc4_reset_cl(&vc4->shader_rec); vc4_reset_cl(&vc4->uniforms); vc4_reset_cl(&vc4->bo_handles); vc4_reset_cl(&vc4->bo_pointers); vc4->shader_rec_count = 0; vc4->needs_flush = false; vc4->draw_call_queued = false; /* We have no hardware context saved between our draw calls, so we * need to flag the next draw as needing all state emitted. Emitting * all state at the start of our draws is also what ensures that we * return to the state we need after a previous tile has finished. */ vc4->dirty = ~0; vc4->resolve = 0; vc4->cleared = 0; vc4->draw_min_x = ~0; vc4->draw_min_y = ~0; vc4->draw_max_x = 0; vc4->draw_max_y = 0; } void vc4_flush(struct pipe_context *pctx) { struct vc4_context *vc4 = vc4_context(pctx); if (!vc4->needs_flush) return; /* The RCL setup would choke if the draw bounds cause no drawing, so * just drop the drawing if that's the case. */ if (vc4->draw_max_x <= vc4->draw_min_x || vc4->draw_max_y <= vc4->draw_min_y) { vc4_draw_reset(vc4); return; } /* Increment the semaphore indicating that binning is done and * unblocking the render thread. Note that this doesn't act until the * FLUSH completes. */ cl_ensure_space(&vc4->bcl, 8); cl_u8(&vc4->bcl, VC4_PACKET_INCREMENT_SEMAPHORE); /* The FLUSH caps all of our bin lists with a VC4_PACKET_RETURN. */ cl_u8(&vc4->bcl, VC4_PACKET_FLUSH); vc4_setup_rcl(vc4); if (vc4_debug & VC4_DEBUG_CL) { fprintf(stderr, "BCL:\n"); vc4_dump_cl(vc4->bcl.base, vc4->bcl.next - vc4->bcl.base, false); fprintf(stderr, "RCL:\n"); vc4_dump_cl(vc4->rcl.base, vc4->rcl.next - vc4->rcl.base, true); } struct drm_vc4_submit_cl submit; memset(&submit, 0, sizeof(submit)); submit.bo_handles = (uintptr_t)vc4->bo_handles.base; submit.bo_handle_count = (vc4->bo_handles.next - vc4->bo_handles.base) / 4; submit.bin_cl = (uintptr_t)vc4->bcl.base; submit.bin_cl_size = vc4->bcl.next - vc4->bcl.base; submit.render_cl = (uintptr_t)vc4->rcl.base; submit.render_cl_size = vc4->rcl.next - vc4->rcl.base; submit.shader_rec = (uintptr_t)vc4->shader_rec.base; submit.shader_rec_size = vc4->shader_rec.next - vc4->shader_rec.base; submit.shader_rec_count = vc4->shader_rec_count; submit.uniforms = (uintptr_t)vc4->uniforms.base; submit.uniforms_size = vc4->uniforms.next - vc4->uniforms.base; if (!(vc4_debug & VC4_DEBUG_NORAST)) { int ret; #ifndef USE_VC4_SIMULATOR ret = drmIoctl(vc4->fd, DRM_IOCTL_VC4_SUBMIT_CL, &submit); #else ret = vc4_simulator_flush(vc4, &submit); #endif if (ret) { fprintf(stderr, "VC4 submit failed\n"); abort(); } } vc4->last_emit_seqno = submit.seqno; if (vc4_debug & VC4_DEBUG_ALWAYS_SYNC) { if (!vc4_wait_seqno(vc4->screen, vc4->last_emit_seqno, PIPE_TIMEOUT_INFINITE)) { fprintf(stderr, "Wait failed.\n"); abort(); } } vc4_draw_reset(vc4); } static void vc4_pipe_flush(struct pipe_context *pctx, struct pipe_fence_handle **fence, unsigned flags) { struct vc4_context *vc4 = vc4_context(pctx); vc4_flush(pctx); if (fence) { struct vc4_fence *f = vc4_fence_create(vc4->screen, vc4->last_emit_seqno); *fence = (struct pipe_fence_handle *)f; } } /** * Flushes the current command lists if they reference the given BO. * * This helps avoid flushing the command buffers when unnecessary. */ bool vc4_cl_references_bo(struct pipe_context *pctx, struct vc4_bo *bo) { struct vc4_context *vc4 = vc4_context(pctx); if (!vc4->needs_flush) return false; /* Walk all the referenced BOs in the drawing command list to see if * they match. */ struct vc4_bo **referenced_bos = vc4->bo_pointers.base; for (int i = 0; i < (vc4->bo_handles.next - vc4->bo_handles.base) / 4; i++) { if (referenced_bos[i] == bo) { return true; } } /* Also check for the Z/color buffers, since the references to those * are only added immediately before submit. */ struct vc4_surface *csurf = vc4_surface(vc4->framebuffer.cbufs[0]); if (csurf) { struct vc4_resource *ctex = vc4_resource(csurf->base.texture); if (ctex->bo == bo) { return true; } } struct vc4_surface *zsurf = vc4_surface(vc4->framebuffer.zsbuf); if (zsurf) { struct vc4_resource *ztex = vc4_resource(zsurf->base.texture); if (ztex->bo == bo) { return true; } } return false; } static void vc4_invalidate_resource(struct pipe_context *pctx, struct pipe_resource *prsc) { struct vc4_context *vc4 = vc4_context(pctx); struct pipe_surface *zsurf = vc4->framebuffer.zsbuf; if (zsurf && zsurf->texture == prsc) vc4->resolve &= ~(PIPE_CLEAR_DEPTH | PIPE_CLEAR_STENCIL); } static void vc4_context_destroy(struct pipe_context *pctx) { struct vc4_context *vc4 = vc4_context(pctx); if (vc4->blitter) util_blitter_destroy(vc4->blitter); if (vc4->primconvert) util_primconvert_destroy(vc4->primconvert); util_slab_destroy(&vc4->transfer_pool); pipe_surface_reference(&vc4->framebuffer.cbufs[0], NULL); pipe_surface_reference(&vc4->framebuffer.zsbuf, NULL); vc4_bo_unreference(&vc4->tile_alloc); vc4_bo_unreference(&vc4->tile_state); vc4_program_fini(pctx); ralloc_free(vc4); } struct pipe_context * vc4_context_create(struct pipe_screen *pscreen, void *priv) { struct vc4_screen *screen = vc4_screen(pscreen); struct vc4_context *vc4; /* Prevent dumping of the shaders built during context setup. */ uint32_t saved_shaderdb_flag = vc4_debug & VC4_DEBUG_SHADERDB; vc4_debug &= ~VC4_DEBUG_SHADERDB; vc4 = rzalloc(NULL, struct vc4_context); if (vc4 == NULL) return NULL; struct pipe_context *pctx = &vc4->base; vc4->screen = screen; pctx->screen = pscreen; pctx->priv = priv; pctx->destroy = vc4_context_destroy; pctx->flush = vc4_pipe_flush; pctx->invalidate_resource = vc4_invalidate_resource; vc4_draw_init(pctx); vc4_state_init(pctx); vc4_program_init(pctx); vc4_query_init(pctx); vc4_resource_context_init(pctx); vc4_init_cl(vc4, &vc4->bcl); vc4_init_cl(vc4, &vc4->rcl); vc4_init_cl(vc4, &vc4->shader_rec); vc4_init_cl(vc4, &vc4->uniforms); vc4_init_cl(vc4, &vc4->bo_handles); vc4_init_cl(vc4, &vc4->bo_pointers); vc4_draw_reset(vc4); vc4->fd = screen->fd; util_slab_create(&vc4->transfer_pool, sizeof(struct vc4_transfer), 16, UTIL_SLAB_SINGLETHREADED); vc4->blitter = util_blitter_create(pctx); if (!vc4->blitter) goto fail; vc4->primconvert = util_primconvert_create(pctx, (1 << PIPE_PRIM_QUADS) - 1); if (!vc4->primconvert) goto fail; vc4_debug |= saved_shaderdb_flag; return &vc4->base; fail: pctx->destroy(pctx); return NULL; }