.. _screen: Screen ====== A screen is an object representing the context-independent part of a device. Flags and enumerations ---------------------- XXX some of these don't belong in this section. .. _pipe_cap: PIPE_CAP_* ^^^^^^^^^^ Capability queries return information about the features and limits of the driver/GPU. For floating-point values, use :ref:`get_paramf`, and for boolean or integer values, use :ref:`get_param`. The integer capabilities: * ``PIPE_CAP_GRAPHICS``: Whether graphics is supported. If not, contexts can only be created with PIPE_CONTEXT_COMPUTE_ONLY. * ``PIPE_CAP_NPOT_TEXTURES``: Whether :term:`NPOT` textures may have repeat modes, normalized coordinates, and mipmaps. * ``PIPE_CAP_MAX_DUAL_SOURCE_RENDER_TARGETS``: How many dual-source blend RTs are support. :ref:`Blend` for more information. * ``PIPE_CAP_ANISOTROPIC_FILTER``: Whether textures can be filtered anisotropically. * ``PIPE_CAP_POINT_SPRITE``: Whether point sprites are available. * ``PIPE_CAP_MAX_RENDER_TARGETS``: The maximum number of render targets that may be bound. * ``PIPE_CAP_OCCLUSION_QUERY``: Whether occlusion queries are available. * ``PIPE_CAP_QUERY_TIME_ELAPSED``: Whether PIPE_QUERY_TIME_ELAPSED queries are available. * ``PIPE_CAP_TEXTURE_SHADOW_MAP``: indicates whether the fragment shader hardware can do the depth texture / Z comparison operation in TEX instructions for shadow testing. * ``PIPE_CAP_TEXTURE_SWIZZLE``: Whether swizzling through sampler views is supported. * ``PIPE_CAP_MAX_TEXTURE_2D_SIZE``: The maximum size of 2D (and 1D) textures. * ``PIPE_CAP_MAX_TEXTURE_3D_LEVELS``: The maximum number of mipmap levels available for a 3D texture. * ``PIPE_CAP_MAX_TEXTURE_CUBE_LEVELS``: The maximum number of mipmap levels available for a cubemap. * ``PIPE_CAP_TEXTURE_MIRROR_CLAMP_TO_EDGE``: Whether mirrored texture coordinates are supported with the clamp-to-edge wrap mode. * ``PIPE_CAP_TEXTURE_MIRROR_CLAMP``: Whether mirrored texture coordinates are supported with clamp or clamp-to-border wrap modes. * ``PIPE_CAP_BLEND_EQUATION_SEPARATE``: Whether alpha blend equations may be different from color blend equations, in :ref:`Blend` state. * ``PIPE_CAP_MAX_STREAM_OUTPUT_BUFFERS``: The maximum number of stream buffers. * ``PIPE_CAP_PRIMITIVE_RESTART``: Whether primitive restart is supported. * ``PIPE_CAP_INDEP_BLEND_ENABLE``: Whether per-rendertarget blend enabling and channel masks are supported. If 0, then the first rendertarget's blend mask is replicated across all MRTs. * ``PIPE_CAP_INDEP_BLEND_FUNC``: Whether per-rendertarget blend functions are available. If 0, then the first rendertarget's blend functions affect all MRTs. * ``PIPE_CAP_MAX_TEXTURE_ARRAY_LAYERS``: The maximum number of texture array layers supported. If 0, the array textures are not supported at all and the ARRAY texture targets are invalid. * ``PIPE_CAP_TGSI_FS_COORD_ORIGIN_UPPER_LEFT``: Whether the TGSI property FS_COORD_ORIGIN with value UPPER_LEFT is supported. * ``PIPE_CAP_TGSI_FS_COORD_ORIGIN_LOWER_LEFT``: Whether the TGSI property FS_COORD_ORIGIN with value LOWER_LEFT is supported. * ``PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_HALF_INTEGER``: Whether the TGSI property FS_COORD_PIXEL_CENTER with value HALF_INTEGER is supported. * ``PIPE_CAP_TGSI_FS_COORD_PIXEL_CENTER_INTEGER``: Whether the TGSI property FS_COORD_PIXEL_CENTER with value INTEGER is supported. * ``PIPE_CAP_DEPTH_CLIP_DISABLE``: Whether the driver is capable of disabling depth clipping (=1) (through pipe_rasterizer_state) or supports lowering depth_clamp in the client shader code (=2), for this the driver must currently use TGSI. * ``PIPE_CAP_DEPTH_CLIP_DISABLE_SEPARATE``: Whether the driver is capable of disabling depth clipping (through pipe_rasterizer_state) separately for the near and far plane. If not, depth_clip_near and depth_clip_far will be equal. * ``PIPE_CAP_SHADER_STENCIL_EXPORT``: Whether a stencil reference value can be written from a fragment shader. * ``PIPE_CAP_TGSI_INSTANCEID``: Whether TGSI_SEMANTIC_INSTANCEID is supported in the vertex shader. * ``PIPE_CAP_VERTEX_ELEMENT_INSTANCE_DIVISOR``: Whether the driver supports per-instance vertex attribs. * ``PIPE_CAP_FRAGMENT_COLOR_CLAMPED``: Whether fragment color clamping is supported. That is, is the pipe_rasterizer_state::clamp_fragment_color flag supported by the driver? If not, the state tracker will insert clamping code into the fragment shaders when needed. * ``PIPE_CAP_MIXED_COLORBUFFER_FORMATS``: Whether mixed colorbuffer formats are supported, e.g. RGBA8 and RGBA32F as the first and second colorbuffer, resp. * ``PIPE_CAP_VERTEX_COLOR_UNCLAMPED``: Whether the driver is capable of outputting unclamped vertex colors from a vertex shader. If unsupported, the vertex colors are always clamped. This is the default for DX9 hardware. * ``PIPE_CAP_VERTEX_COLOR_CLAMPED``: Whether the driver is capable of clamping vertex colors when they come out of a vertex shader, as specified by the pipe_rasterizer_state::clamp_vertex_color flag. If unsupported, the vertex colors are never clamped. This is the default for DX10 hardware. If both clamped and unclamped CAPs are supported, the clamping can be controlled through pipe_rasterizer_state. If the driver cannot do vertex color clamping, the state tracker may insert clamping code into the vertex shader. * ``PIPE_CAP_GLSL_FEATURE_LEVEL``: Whether the driver supports features equivalent to a specific GLSL version. E.g. for GLSL 1.3, report 130. * ``PIPE_CAP_GLSL_FEATURE_LEVEL_COMPATIBILITY``: Whether the driver supports features equivalent to a specific GLSL version including all legacy OpenGL features only present in the OpenGL compatibility profile. The only legacy features that Gallium drivers must implement are the legacy shader inputs and outputs (colors, texcoords, fog, clipvertex, edgeflag). * ``PIPE_CAP_ESSL_FEATURE_LEVEL``: An optional cap to allow drivers to report a higher GLSL version for GLES contexts. This is useful when a driver does not support all the required features for a higher GL version, but does support the required features for a higher GLES version. A driver is allowed to return ``0`` in which case ``PIPE_CAP_GLSL_FEATURE_LEVEL`` is used. Note that simply returning the same value as the GLSL feature level cap is incorrect. For example, GLSL version 3.30 does not require ``ARB_gpu_shader5``, but ESSL version 3.20 es does require ``EXT_gpu_shader5`` * ``PIPE_CAP_QUADS_FOLLOW_PROVOKING_VERTEX_CONVENTION``: Whether quads adhere to the flatshade_first setting in ``pipe_rasterizer_state``. * ``PIPE_CAP_USER_VERTEX_BUFFERS``: Whether the driver supports user vertex buffers. If not, the state tracker must upload all data which is not in hw resources. If user-space buffers are supported, the driver must also still accept HW resource buffers. * ``PIPE_CAP_VERTEX_BUFFER_OFFSET_4BYTE_ALIGNED_ONLY``: This CAP describes a hw limitation. If true, pipe_vertex_buffer::buffer_offset must always be aligned to 4. If false, there are no restrictions on the offset. * ``PIPE_CAP_VERTEX_BUFFER_STRIDE_4BYTE_ALIGNED_ONLY``: This CAP describes a hw limitation. If true, pipe_vertex_buffer::stride must always be aligned to 4. If false, there are no restrictions on the stride. * ``PIPE_CAP_VERTEX_ELEMENT_SRC_OFFSET_4BYTE_ALIGNED_ONLY``: This CAP describes a hw limitation. If true, pipe_vertex_element::src_offset must always be aligned to 4. If false, there are no restrictions on src_offset. * ``PIPE_CAP_COMPUTE``: Whether the implementation supports the compute entry points defined in pipe_context and pipe_screen. * ``PIPE_CAP_CONSTANT_BUFFER_OFFSET_ALIGNMENT``: Describes the required alignment of pipe_constant_buffer::buffer_offset. * ``PIPE_CAP_START_INSTANCE``: Whether the driver supports pipe_draw_info::start_instance. * ``PIPE_CAP_QUERY_TIMESTAMP``: Whether PIPE_QUERY_TIMESTAMP and the pipe_screen::get_timestamp hook are implemented. * ``PIPE_CAP_TEXTURE_MULTISAMPLE``: Whether all MSAA resources supported for rendering are also supported for texturing. * ``PIPE_CAP_MIN_MAP_BUFFER_ALIGNMENT``: The minimum alignment that should be expected for a pointer returned by transfer_map if the resource is PIPE_BUFFER. In other words, the pointer returned by transfer_map is always aligned to this value. * ``PIPE_CAP_TEXTURE_BUFFER_OFFSET_ALIGNMENT``: Describes the required alignment for pipe_sampler_view::u.buf.offset, in bytes. If a driver does not support offset/size, it should return 0. * ``PIPE_CAP_BUFFER_SAMPLER_VIEW_RGBA_ONLY``: Whether the driver only supports R, RG, RGB and RGBA formats for PIPE_BUFFER sampler views. When this is the case it should be assumed that the swizzle parameters in the sampler view have no effect. * ``PIPE_CAP_TGSI_TEXCOORD``: This CAP describes a hw limitation. If true, the hardware cannot replace arbitrary shader inputs with sprite coordinates and hence the inputs that are desired to be replaceable must be declared with TGSI_SEMANTIC_TEXCOORD instead of TGSI_SEMANTIC_GENERIC. The rasterizer's sprite_coord_enable state therefore also applies to the TEXCOORD semantic. Also, TGSI_SEMANTIC_PCOORD becomes available, which labels a fragment shader input that will always be replaced with sprite coordinates. * ``PIPE_CAP_PREFER_BLIT_BASED_TEXTURE_TRANSFER``: Whether it is preferable to use a blit to implement a texture transfer which needs format conversions and swizzling in state trackers. Generally, all hardware drivers with dedicated memory should return 1 and all software rasterizers should return 0. * ``PIPE_CAP_QUERY_PIPELINE_STATISTICS``: Whether PIPE_QUERY_PIPELINE_STATISTICS is supported. * ``PIPE_CAP_TEXTURE_BORDER_COLOR_QUIRK``: Bitmask indicating whether special considerations have to be given to the interaction between the border color in the sampler object and the sampler view used with it. If PIPE_QUIRK_TEXTURE_BORDER_COLOR_SWIZZLE_R600 is set, the border color may be affected in undefined ways for any kind of permutational swizzle (any swizzle XYZW where X/Y/Z/W are not ZERO, ONE, or R/G/B/A respectively) in the sampler view. If PIPE_QUIRK_TEXTURE_BORDER_COLOR_SWIZZLE_NV50 is set, the border color state should be swizzled manually according to the swizzle in the sampler view it is intended to be used with, or herein undefined results may occur for permutational swizzles. * ``PIPE_CAP_MAX_TEXTURE_BUFFER_SIZE``: The maximum accessible size with a buffer sampler view, in texels. * ``PIPE_CAP_MAX_VIEWPORTS``: The maximum number of viewports (and scissors since they are linked) a driver can support. Returning 0 is equivalent to returning 1 because every driver has to support at least a single viewport/scissor combination. * ``PIPE_CAP_ENDIANNESS``:: The endianness of the device. Either PIPE_ENDIAN_BIG or PIPE_ENDIAN_LITTLE. * ``PIPE_CAP_MIXED_FRAMEBUFFER_SIZES``: Whether it is allowed to have different sizes for fb color/zs attachments. This controls whether ARB_framebuffer_object is provided. * ``PIPE_CAP_TGSI_VS_LAYER_VIEWPORT``: Whether ``TGSI_SEMANTIC_LAYER`` and ``TGSI_SEMANTIC_VIEWPORT_INDEX`` are supported as vertex shader outputs. Note that the viewport will only be used if multiple viewports are exposed. * ``PIPE_CAP_MAX_GEOMETRY_OUTPUT_VERTICES``: The maximum number of vertices output by a single invocation of a geometry shader. * ``PIPE_CAP_MAX_GEOMETRY_TOTAL_OUTPUT_COMPONENTS``: The maximum number of vertex components output by a single invocation of a geometry shader. This is the product of the number of attribute components per vertex and the number of output vertices. * ``PIPE_CAP_MAX_TEXTURE_GATHER_COMPONENTS``: Max number of components in format that texture gather can operate on. 1 == RED, ALPHA etc, 4 == All formats. * ``PIPE_CAP_TEXTURE_GATHER_SM5``: Whether the texture gather hardware implements the SM5 features, component selection, shadow comparison, and run-time offsets. * ``PIPE_CAP_BUFFER_MAP_PERSISTENT_COHERENT``: Whether PIPE_TRANSFER_PERSISTENT and PIPE_TRANSFER_COHERENT are supported for buffers. * ``PIPE_CAP_TEXTURE_QUERY_LOD``: Whether the ``LODQ`` instruction is supported. * ``PIPE_CAP_MIN_TEXTURE_GATHER_OFFSET``: The minimum offset that can be used in conjunction with a texture gather opcode. * ``PIPE_CAP_MAX_TEXTURE_GATHER_OFFSET``: The maximum offset that can be used in conjunction with a texture gather opcode. * ``PIPE_CAP_SAMPLE_SHADING``: Whether there is support for per-sample shading. The context->set_min_samples function will be expected to be implemented. * ``PIPE_CAP_TEXTURE_GATHER_OFFSETS``: Whether the ``TG4`` instruction can accept 4 offsets. * ``PIPE_CAP_TGSI_VS_WINDOW_SPACE_POSITION``: Whether TGSI_PROPERTY_VS_WINDOW_SPACE_POSITION is supported, which disables clipping and viewport transformation. * ``PIPE_CAP_MAX_VERTEX_STREAMS``: The maximum number of vertex streams supported by the geometry shader. If stream-out is supported, this should be at least 1. If stream-out is not supported, this should be 0. * ``PIPE_CAP_DRAW_INDIRECT``: Whether the driver supports taking draw arguments { count, instance_count, start, index_bias } from a PIPE_BUFFER resource. See pipe_draw_info. * ``PIPE_CAP_MULTI_DRAW_INDIRECT``: Whether the driver supports pipe_draw_info::indirect_stride and ::indirect_count * ``PIPE_CAP_MULTI_DRAW_INDIRECT_PARAMS``: Whether the driver supports taking the number of indirect draws from a separate parameter buffer, see pipe_draw_indirect_info::indirect_draw_count. * ``PIPE_CAP_TGSI_FS_FINE_DERIVATIVE``: Whether the fragment shader supports the FINE versions of DDX/DDY. * ``PIPE_CAP_VENDOR_ID``: The vendor ID of the underlying hardware. If it's not available one should return 0xFFFFFFFF. * ``PIPE_CAP_DEVICE_ID``: The device ID (PCI ID) of the underlying hardware. 0xFFFFFFFF if not available. * ``PIPE_CAP_ACCELERATED``: Whether the renderer is hardware accelerated. * ``PIPE_CAP_VIDEO_MEMORY``: The amount of video memory in megabytes. * ``PIPE_CAP_UMA``: If the device has a unified memory architecture or on-card memory and GART. * ``PIPE_CAP_CONDITIONAL_RENDER_INVERTED``: Whether the driver supports inverted condition for conditional rendering. * ``PIPE_CAP_MAX_VERTEX_ATTRIB_STRIDE``: The maximum supported vertex stride. * ``PIPE_CAP_SAMPLER_VIEW_TARGET``: Whether the sampler view's target can be different than the underlying resource's, as permitted by ARB_texture_view. For example a 2d array texture may be reinterpreted as a cube (array) texture and vice-versa. * ``PIPE_CAP_CLIP_HALFZ``: Whether the driver supports the pipe_rasterizer_state::clip_halfz being set to true. This is required for enabling ARB_clip_control. * ``PIPE_CAP_VERTEXID_NOBASE``: If true, the driver only supports TGSI_SEMANTIC_VERTEXID_NOBASE (and not TGSI_SEMANTIC_VERTEXID). This means state trackers for APIs whose vertexIDs are offset by basevertex (such as GL) will need to lower TGSI_SEMANTIC_VERTEXID to TGSI_SEMANTIC_VERTEXID_NOBASE and TGSI_SEMANTIC_BASEVERTEX, so drivers setting this must handle both these semantics. Only relevant if geometry shaders are supported. (BASEVERTEX could be exposed separately too via ``PIPE_CAP_DRAW_PARAMETERS``). * ``PIPE_CAP_POLYGON_OFFSET_CLAMP``: If true, the driver implements support for ``pipe_rasterizer_state::offset_clamp``. * ``PIPE_CAP_MULTISAMPLE_Z_RESOLVE``: Whether the driver supports blitting a multisampled depth buffer into a single-sampled texture (or depth buffer). Only the first sampled should be copied. * ``PIPE_CAP_RESOURCE_FROM_USER_MEMORY``: Whether the driver can create a pipe_resource where an already-existing piece of (malloc'd) user memory is used as its backing storage. In other words, whether the driver can map existing user memory into the device address space for direct device access. The create function is pipe_screen::resource_from_user_memory. The address and size must be page-aligned. * ``PIPE_CAP_DEVICE_RESET_STATUS_QUERY``: Whether pipe_context::get_device_reset_status is implemented. * ``PIPE_CAP_MAX_SHADER_PATCH_VARYINGS``: How many per-patch outputs and inputs are supported between tessellation control and tessellation evaluation shaders, not counting in TESSINNER and TESSOUTER. The minimum allowed value for OpenGL is 30. * ``PIPE_CAP_TEXTURE_FLOAT_LINEAR``: Whether the linear minification and magnification filters are supported with single-precision floating-point textures. * ``PIPE_CAP_TEXTURE_HALF_FLOAT_LINEAR``: Whether the linear minification and magnification filters are supported with half-precision floating-point textures. * ``PIPE_CAP_DEPTH_BOUNDS_TEST``: Whether bounds_test, bounds_min, and bounds_max states of pipe_depth_stencil_alpha_state behave according to the GL_EXT_depth_bounds_test specification. * ``PIPE_CAP_TGSI_TXQS``: Whether the `TXQS` opcode is supported * ``PIPE_CAP_FORCE_PERSAMPLE_INTERP``: If the driver can force per-sample interpolation for all fragment shader inputs if pipe_rasterizer_state::force_persample_interp is set. This is only used by GL3-level sample shading (ARB_sample_shading). GL4-level sample shading (ARB_gpu_shader5) doesn't use this. While GL3 hardware has a state for it, GL4 hardware will likely need to emulate it with a shader variant, or by selecting the interpolation weights with a conditional assignment in the shader. * ``PIPE_CAP_SHAREABLE_SHADERS``: Whether shader CSOs can be used by any pipe_context. * ``PIPE_CAP_COPY_BETWEEN_COMPRESSED_AND_PLAIN_FORMATS``: Whether copying between compressed and plain formats is supported where a compressed block is copied to/from a plain pixel of the same size. * ``PIPE_CAP_CLEAR_TEXTURE``: Whether `clear_texture` will be available in contexts. * ``PIPE_CAP_DRAW_PARAMETERS``: Whether ``TGSI_SEMANTIC_BASEVERTEX``, ``TGSI_SEMANTIC_BASEINSTANCE``, and ``TGSI_SEMANTIC_DRAWID`` are supported in vertex shaders. * ``PIPE_CAP_TGSI_PACK_HALF_FLOAT``: Whether the ``UP2H`` and ``PK2H`` TGSI opcodes are supported. * ``PIPE_CAP_TGSI_FS_POSITION_IS_SYSVAL``: If state trackers should use a system value for the POSITION fragment shader input. * ``PIPE_CAP_TGSI_FS_POINT_IS_SYSVAL``: If state trackers should use a system value for the POINT fragment shader input. * ``PIPE_CAP_TGSI_FS_FACE_IS_INTEGER_SYSVAL``: If state trackers should use a system value for the FACE fragment shader input. Also, the FACE system value is integer, not float. * ``PIPE_CAP_SHADER_BUFFER_OFFSET_ALIGNMENT``: Describes the required alignment for pipe_shader_buffer::buffer_offset, in bytes. Maximum value allowed is 256 (for GL conformance). 0 is only allowed if shader buffers are not supported. * ``PIPE_CAP_INVALIDATE_BUFFER``: Whether the use of ``invalidate_resource`` for buffers is supported. * ``PIPE_CAP_GENERATE_MIPMAP``: Indicates whether pipe_context::generate_mipmap is supported. * ``PIPE_CAP_STRING_MARKER``: Whether pipe->emit_string_marker() is supported. * ``PIPE_CAP_SURFACE_REINTERPRET_BLOCKS``: Indicates whether pipe_context::create_surface supports reinterpreting a texture as a surface of a format with different block width/height (but same block size in bits). For example, a compressed texture image can be interpreted as a non-compressed surface whose texels are the same number of bits as the compressed blocks, and vice versa. The width and height of the surface is adjusted appropriately. * ``PIPE_CAP_QUERY_BUFFER_OBJECT``: Driver supports context::get_query_result_resource callback. * ``PIPE_CAP_PCI_GROUP``: Return the PCI segment group number. * ``PIPE_CAP_PCI_BUS``: Return the PCI bus number. * ``PIPE_CAP_PCI_DEVICE``: Return the PCI device number. * ``PIPE_CAP_PCI_FUNCTION``: Return the PCI function number. * ``PIPE_CAP_FRAMEBUFFER_NO_ATTACHMENT``: If non-zero, rendering to framebuffers with no surface attachments is supported. The context->is_format_supported function will be expected to be implemented with PIPE_FORMAT_NONE yeilding the MSAA modes the hardware supports. N.B., The maximum number of layers supported for rasterizing a primitive on a layer is obtained from ``PIPE_CAP_MAX_TEXTURE_ARRAY_LAYERS`` even though it can be larger than the number of layers supported by either rendering or textures. * ``PIPE_CAP_ROBUST_BUFFER_ACCESS_BEHAVIOR``: Implementation uses bounds checking on resource accesses by shader if the context is created with PIPE_CONTEXT_ROBUST_BUFFER_ACCESS. See the ARB_robust_buffer_access_behavior extension for information on the required behavior for out of bounds accesses and accesses to unbound resources. * ``PIPE_CAP_CULL_DISTANCE``: Whether the driver supports the arb_cull_distance extension and thus implements proper support for culling planes. * ``PIPE_CAP_PRIMITIVE_RESTART_FOR_PATCHES``: Whether primitive restart is supported for patch primitives. * ``PIPE_CAP_TGSI_VOTE``: Whether the ``VOTE_*`` ops can be used in shaders. * ``PIPE_CAP_MAX_WINDOW_RECTANGLES``: The maxium number of window rectangles supported in ``set_window_rectangles``. * ``PIPE_CAP_POLYGON_OFFSET_UNITS_UNSCALED``: If true, the driver implements support for ``pipe_rasterizer_state::offset_units_unscaled``. * ``PIPE_CAP_VIEWPORT_SUBPIXEL_BITS``: Number of bits of subpixel precision for floating point viewport bounds. * ``PIPE_CAP_RASTERIZER_SUBPIXEL_BITS``: Number of bits of subpixel precision used by the rasterizer. * ``PIPE_CAP_MIXED_COLOR_DEPTH_BITS``: Whether there is non-fallback support for color/depth format combinations that use a different number of bits. For the purpose of this cap, Z24 is treated as 32-bit. If set to off, that means that a B5G6R5 + Z24 or RGBA8 + Z16 combination will require a driver fallback, and should not be advertised in the GLX/EGL config list. * ``PIPE_CAP_TGSI_ARRAY_COMPONENTS``: If true, the driver interprets the UsageMask of input and output declarations and allows declaring arrays in overlapping ranges. The components must be a contiguous range, e.g. a UsageMask of xy or yzw is allowed, but xz or yw isn't. Declarations with overlapping locations must have matching semantic names and indices, and equal interpolation qualifiers. Components may overlap, notably when the gaps in an array of dvec3 are filled in. * ``PIPE_CAP_STREAM_OUTPUT_INTERLEAVE_BUFFERS``: Whether interleaved stream output mode is able to interleave across buffers. This is required for ARB_transform_feedback3. * ``PIPE_CAP_TGSI_CAN_READ_OUTPUTS``: Whether every TGSI shader stage can read from the output file. * ``PIPE_CAP_GLSL_OPTIMIZE_CONSERVATIVELY``: Tell the GLSL compiler to use the minimum amount of optimizations just to be able to do all the linking and lowering. * ``PIPE_CAP_FBFETCH``: The number of render targets whose value in the current framebuffer can be read in the shader. 0 means framebuffer fetch is not supported. 1 means that only the first render target can be read, and a larger value would mean that multiple render targets are supported. * ``PIPE_CAP_FBFETCH_COHERENT``: Whether framebuffer fetches from the fragment shader can be guaranteed to be coherent with framebuffer writes. * ``PIPE_CAP_TGSI_MUL_ZERO_WINS``: Whether TGSI shaders support the ``TGSI_PROPERTY_MUL_ZERO_WINS`` shader property. * ``PIPE_CAP_DOUBLES``: Whether double precision floating-point operations are supported. * ``PIPE_CAP_INT64``: Whether 64-bit integer operations are supported. * ``PIPE_CAP_INT64_DIVMOD``: Whether 64-bit integer division/modulo operations are supported. * ``PIPE_CAP_TGSI_TEX_TXF_LZ``: Whether TEX_LZ and TXF_LZ opcodes are supported. * ``PIPE_CAP_TGSI_CLOCK``: Whether the CLOCK opcode is supported. * ``PIPE_CAP_POLYGON_MODE_FILL_RECTANGLE``: Whether the PIPE_POLYGON_MODE_FILL_RECTANGLE mode is supported for ``pipe_rasterizer_state::fill_front`` and ``pipe_rasterizer_state::fill_back``. * ``PIPE_CAP_SPARSE_BUFFER_PAGE_SIZE``: The page size of sparse buffers in bytes, or 0 if sparse buffers are not supported. The page size must be at most 64KB. * ``PIPE_CAP_TGSI_BALLOT``: Whether the BALLOT and READ_* opcodes as well as the SUBGROUP_* semantics are supported. * ``PIPE_CAP_TGSI_TES_LAYER_VIEWPORT``: Whether ``TGSI_SEMANTIC_LAYER`` and ``TGSI_SEMANTIC_VIEWPORT_INDEX`` are supported as tessellation evaluation shader outputs. * ``PIPE_CAP_CAN_BIND_CONST_BUFFER_AS_VERTEX``: Whether a buffer with just PIPE_BIND_CONSTANT_BUFFER can be legally passed to set_vertex_buffers. * ``PIPE_CAP_ALLOW_MAPPED_BUFFERS_DURING_EXECUTION``: As the name says. * ``PIPE_CAP_POST_DEPTH_COVERAGE``: whether ``TGSI_PROPERTY_FS_POST_DEPTH_COVERAGE`` is supported. * ``PIPE_CAP_BINDLESS_TEXTURE``: Whether bindless texture operations are supported. * ``PIPE_CAP_NIR_SAMPLERS_AS_DEREF``: Whether NIR tex instructions should reference texture and sampler as NIR derefs instead of by indices. * ``PIPE_CAP_QUERY_SO_OVERFLOW``: Whether the ``PIPE_QUERY_SO_OVERFLOW_PREDICATE`` and ``PIPE_QUERY_SO_OVERFLOW_ANY_PREDICATE`` query types are supported. Note that for a driver that does not support multiple output streams (i.e., ``PIPE_CAP_MAX_VERTEX_STREAMS`` is 1), both query types are identical. * ``PIPE_CAP_MEMOBJ``: Whether operations on memory objects are supported. * ``PIPE_CAP_LOAD_CONSTBUF``: True if the driver supports ``TGSI_OPCODE_LOAD`` use with constant buffers. * ``PIPE_CAP_TGSI_ANY_REG_AS_ADDRESS``: Any TGSI register can be used as an address for indirect register indexing. * ``PIPE_CAP_TILE_RASTER_ORDER``: Whether the driver supports GL_MESA_tile_raster_order, using the tile_raster_order_* fields in pipe_rasterizer_state. * ``PIPE_CAP_MAX_COMBINED_SHADER_OUTPUT_RESOURCES``: Limit on combined shader output resources (images + buffers + fragment outputs). If 0 the state tracker works it out. * ``PIPE_CAP_FRAMEBUFFER_MSAA_CONSTRAINTS``: This determines limitations on the number of samples that framebuffer attachments can have. Possible values: 0: color.nr_samples == zs.nr_samples == color.nr_storage_samples (standard MSAA quality) 1: color.nr_samples >= zs.nr_samples == color.nr_storage_samples (enhanced MSAA quality) 2: color.nr_samples >= zs.nr_samples >= color.nr_storage_samples (full flexibility in tuning MSAA quality and performance) All color attachments must have the same number of samples and the same number of storage samples. * ``PIPE_CAP_SIGNED_VERTEX_BUFFER_OFFSET``: Whether pipe_vertex_buffer::buffer_offset is treated as signed. The u_vbuf module needs this for optimal performance in workstation applications. * ``PIPE_CAP_CONTEXT_PRIORITY_MASK``: For drivers that support per-context priorities, this returns a bitmask of ``PIPE_CONTEXT_PRIORITY_x`` for the supported priority levels. A driver that does not support prioritized contexts can return 0. * ``PIPE_CAP_FENCE_SIGNAL``: True if the driver supports signaling semaphores using fence_server_signal(). * ``PIPE_CAP_CONSTBUF0_FLAGS``: The bits of pipe_resource::flags that must be set when binding that buffer as constant buffer 0. If the buffer doesn't have those bits set, pipe_context::set_constant_buffer(.., 0, ..) is ignored by the driver, and the driver can throw assertion failures. * ``PIPE_CAP_PACKED_UNIFORMS``: True if the driver supports packed uniforms as opposed to padding to vec4s. * ``PIPE_CAP_CONSERVATIVE_RASTER_POST_SNAP_TRIANGLES``: Whether the ``PIPE_CONSERVATIVE_RASTER_POST_SNAP`` mode is supported for triangles. The post-snap mode means the conservative rasterization occurs after the conversion from floating-point to fixed-point coordinates on the subpixel grid. * ``PIPE_CAP_CONSERVATIVE_RASTER_POST_SNAP_POINTS_LINES``: Whether the ``PIPE_CONSERVATIVE_RASTER_POST_SNAP`` mode is supported for points and lines. * ``PIPE_CAP_CONSERVATIVE_RASTER_PRE_SNAP_TRIANGLES``: Whether the ``PIPE_CONSERVATIVE_RASTER_PRE_SNAP`` mode is supported for triangles. The pre-snap mode means the conservative rasterization occurs before the conversion from floating-point to fixed-point coordinates. * ``PIPE_CAP_CONSERVATIVE_RASTER_PRE_SNAP_POINTS_LINES``: Whether the ``PIPE_CONSERVATIVE_RASTER_PRE_SNAP`` mode is supported for points and lines. * ``PIPE_CAP_CONSERVATIVE_RASTER_POST_DEPTH_COVERAGE``: Whether ``PIPE_CAP_POST_DEPTH_COVERAGE`` works with conservative rasterization. * ``PIPE_CAP_CONSERVATIVE_RASTER_INNER_COVERAGE``: Whether inner_coverage from GL_INTEL_conservative_rasterization is supported. * ``PIPE_CAP_MAX_CONSERVATIVE_RASTER_SUBPIXEL_PRECISION_BIAS``: The maximum subpixel precision bias in bits during conservative rasterization. * ``PIPE_CAP_PROGRAMMABLE_SAMPLE_LOCATIONS``: True is the driver supports programmable sample location through ```get_sample_pixel_grid``` and ```set_sample_locations```. * ``PIPE_CAP_MAX_GS_INVOCATIONS``: Maximum supported value of TGSI_PROPERTY_GS_INVOCATIONS. * ``PIPE_CAP_MAX_SHADER_BUFFER_SIZE``: Maximum supported size for binding with set_shader_buffers. * ``PIPE_CAP_MAX_COMBINED_SHADER_BUFFERS``: Maximum total number of shader buffers. A value of 0 means the sum of all per-shader stage maximums (see ``PIPE_SHADER_CAP_MAX_SHADER_BUFFERS``). * ``PIPE_CAP_MAX_COMBINED_HW_ATOMIC_COUNTERS``: Maximum total number of atomic counters. A value of 0 means the default value (MAX_ATOMIC_COUNTERS = 4096). * ``PIPE_CAP_MAX_COMBINED_HW_ATOMIC_COUNTER_BUFFERS``: Maximum total number of atomic counter buffers. A value of 0 means the sum of all per-shader stage maximums (see ``PIPE_SHADER_CAP_MAX_HW_ATOMIC_COUNTER_BUFFERS``). * ``PIPE_CAP_MAX_TEXTURE_UPLOAD_MEMORY_BUDGET``: Maximum recommend memory size for all active texture uploads combined. This is a performance hint. 0 means no limit. * ``PIPE_CAP_MAX_VERTEX_ELEMENT_SRC_OFFSET``: The maximum supported value for of pipe_vertex_element::src_offset. * ``PIPE_CAP_SURFACE_SAMPLE_COUNT``: Whether the driver supports pipe_surface overrides of resource nr_samples. If set, will enable EXT_multisampled_render_to_texture. * ``PIPE_CAP_TGSI_ATOMFADD``: Atomic floating point adds are supported on images, buffers, and shared memory. * ``PIPE_CAP_RGB_OVERRIDE_DST_ALPHA_BLEND``: True if the driver needs blend state to use zero/one instead of destination alpha for RGB/XRGB formats. * ``PIPE_CAP_GLSL_TESS_LEVELS_AS_INPUTS``: True if the driver wants TESSINNER and TESSOUTER to be inputs (rather than system values) for tessellation evaluation shaders. * ``PIPE_CAP_DEST_SURFACE_SRGB_CONTROL``: Indicates whether the drivers supports switching the format between sRGB and linear for a surface that is used as destination in draw and blit calls. * ``PIPE_CAP_NIR_COMPACT_ARRAYS``: True if the compiler backend supports NIR's compact array feature, for all shader stages. * ``PIPE_CAP_MAX_VARYINGS``: The maximum number of fragment shader varyings. This will generally correspond to ``PIPE_SHADER_CAP_MAX_INPUTS`` for the fragment shader, but in some cases may be a smaller number. * ``PIPE_CAP_COMPUTE_GRID_INFO_LAST_BLOCK``: Whether pipe_grid_info::last_block is implemented by the driver. See struct pipe_grid_info for more details. * ``PIPE_CAP_COMPUTE_SHADER_DERIVATIVE``: True if the driver supports derivatives (and texture lookups with implicit derivatives) in compute shaders. * ``PIPE_CAP_TGSI_SKIP_SHRINK_IO_ARRAYS``: Whether the TGSI pass to shrink IO arrays should be skipped and enforce keeping the declared array sizes instead. A driver might rely on the input mapping that was defined with the original GLSL code. * ``PIPE_CAP_IMAGE_LOAD_FORMATTED``: True if a format for image loads does not need to be specified in the shader IR * ``PIPE_CAP_MAX_FRAMES_IN_FLIGHT``: Maximum number of frames that state trackers should allow to be in flight before throttling pipe_context execution. 0 = throttling is disabled. * ``PIPE_CAP_DMABUF``: Whether Linux DMABUF handles are supported by resource_from_handle and resource_get_handle. * ``PIPE_CAP_PREFER_COMPUTE_FOR_MULTIMEDIA``: Whether VDPAU, VAAPI, and OpenMAX should use a compute-based blit instead of pipe_context::blit and compute pipeline for compositing images. * ``PIPE_CAP_FRAGMENT_SHADER_INTERLOCK``: True if fragment shader interlock functionality is supported. * ``PIPE_CAP_CS_DERIVED_SYSTEM_VALUES_SUPPORTED``: True if driver handles gl_LocalInvocationIndex and gl_GlobalInvocationID. Otherwise, state tracker will lower those system values. * ``PIPE_CAP_ATOMIC_FLOAT_MINMAX``: Atomic float point minimum, maximum, exchange and compare-and-swap support to buffer and shared variables. * ``PIPE_CAP_TGSI_DIV``: Whether opcode DIV is supported * ``PIPE_CAP_FRAGMENT_SHADER_TEXTURE_LOD``: Whether texture lookups with explicit LOD is supported in the fragment shader. * ``PIPE_CAP_FRAGMENT_SHADER_DERIVATIVES``: True if the driver supports derivatives in fragment shaders. * ``PIPE_CAP_VERTEX_SHADER_SATURATE``: True if the driver supports saturate modifiers in the vertex shader. * ``PIPE_CAP_TEXTURE_SHADOW_LOD``: True if the driver supports shadow sampler types with texture functions having interaction with LOD of texture lookup. * ``PIPE_CAP_SHADER_SAMPLES_IDENTICAL``: True if the driver supports a shader query to tell whether all samples of a multisampled surface are definitely identical. * ``PIPE_CAP_TGSI_ATOMINC_WRAP``: Atomic increment/decrement + wrap around are supported. * ``PIPE_CAP_PREFER_IMM_ARRAYS_AS_CONSTBUF``: True if the state tracker should turn arrays whose contents can be deduced at compile time into constant buffer loads, or false if the driver can handle such arrays itself in a more efficient manner. * ``PIPE_CAP_GL_SPIRV``: True if the driver supports ARB_gl_spirv extension. * ``PIPE_CAP_GL_SPIRV_VARIABLE_POINTERS``: True if the driver supports Variable Pointers in SPIR-V shaders. * ``PIPE_CAP_DEMOTE_TO_HELPER_INVOCATION``: True if driver supports demote keyword in GLSL programs. * ``PIPE_CAP_TGSI_TG4_COMPONENT_IN_SWIZZLE``: True if driver wants the TG4 component encoded in sampler swizzle rather than as a separate source. .. _pipe_capf: PIPE_CAPF_* ^^^^^^^^^^^^^^^^ The floating-point capabilities are: * ``PIPE_CAPF_MAX_LINE_WIDTH``: The maximum width of a regular line. * ``PIPE_CAPF_MAX_LINE_WIDTH_AA``: The maximum width of a smoothed line. * ``PIPE_CAPF_MAX_POINT_WIDTH``: The maximum width and height of a point. * ``PIPE_CAPF_MAX_POINT_WIDTH_AA``: The maximum width and height of a smoothed point. * ``PIPE_CAPF_MAX_TEXTURE_ANISOTROPY``: The maximum level of anisotropy that can be applied to anisotropically filtered textures. * ``PIPE_CAPF_MAX_TEXTURE_LOD_BIAS``: The maximum :term:`LOD` bias that may be applied to filtered textures. * ``PIPE_CAPF_MIN_CONSERVATIVE_RASTER_DILATE``: The minimum conservative rasterization dilation. * ``PIPE_CAPF_MAX_CONSERVATIVE_RASTER_DILATE``: The maximum conservative rasterization dilation. * ``PIPE_CAPF_CONSERVATIVE_RASTER_DILATE_GRANULARITY``: The conservative rasterization dilation granularity for values relative to the minimum dilation. .. _pipe_shader_cap: PIPE_SHADER_CAP_* ^^^^^^^^^^^^^^^^^ These are per-shader-stage capabitity queries. Different shader stages may support different features. * ``PIPE_SHADER_CAP_MAX_INSTRUCTIONS``: The maximum number of instructions. * ``PIPE_SHADER_CAP_MAX_ALU_INSTRUCTIONS``: The maximum number of arithmetic instructions. * ``PIPE_SHADER_CAP_MAX_TEX_INSTRUCTIONS``: The maximum number of texture instructions. * ``PIPE_SHADER_CAP_MAX_TEX_INDIRECTIONS``: The maximum number of texture indirections. * ``PIPE_SHADER_CAP_MAX_CONTROL_FLOW_DEPTH``: The maximum nested control flow depth. * ``PIPE_SHADER_CAP_MAX_INPUTS``: The maximum number of input registers. * ``PIPE_SHADER_CAP_MAX_OUTPUTS``: The maximum number of output registers. This is valid for all shaders except the fragment shader. * ``PIPE_SHADER_CAP_MAX_CONST_BUFFER_SIZE``: The maximum size per constant buffer in bytes. * ``PIPE_SHADER_CAP_MAX_CONST_BUFFERS``: Maximum number of constant buffers that can be bound to any shader stage using ``set_constant_buffer``. If 0 or 1, the pipe will only permit binding one constant buffer per shader. If a value greater than 0 is returned, the driver can have multiple constant buffers bound to shader stages. The CONST register file is accessed with two-dimensional indices, like in the example below. DCL CONST[0][0..7] # declare first 8 vectors of constbuf 0 DCL CONST[3][0] # declare first vector of constbuf 3 MOV OUT[0], CONST[0][3] # copy vector 3 of constbuf 0 * ``PIPE_SHADER_CAP_MAX_TEMPS``: The maximum number of temporary registers. * ``PIPE_SHADER_CAP_TGSI_CONT_SUPPORTED``: Whether the continue opcode is supported. * ``PIPE_SHADER_CAP_INDIRECT_INPUT_ADDR``: Whether indirect addressing of the input file is supported. * ``PIPE_SHADER_CAP_INDIRECT_OUTPUT_ADDR``: Whether indirect addressing of the output file is supported. * ``PIPE_SHADER_CAP_INDIRECT_TEMP_ADDR``: Whether indirect addressing of the temporary file is supported. * ``PIPE_SHADER_CAP_INDIRECT_CONST_ADDR``: Whether indirect addressing of the constant file is supported. * ``PIPE_SHADER_CAP_SUBROUTINES``: Whether subroutines are supported, i.e. BGNSUB, ENDSUB, CAL, and RET, including RET in the main block. * ``PIPE_SHADER_CAP_INTEGERS``: Whether integer opcodes are supported. If unsupported, only float opcodes are supported. * ``PIPE_SHADER_CAP_INT64_ATOMICS``: Whether int64 atomic opcodes are supported. The device needs to support add, sub, swap, cmpswap, and, or, xor, min, and max. * ``PIPE_SHADER_CAP_FP16``: Whether half precision floating-point opcodes are supported. If unsupported, half precision ops need to be lowered to full precision. * ``PIPE_SHADER_CAP_MAX_TEXTURE_SAMPLERS``: The maximum number of texture samplers. * ``PIPE_SHADER_CAP_PREFERRED_IR``: Preferred representation of the program. It should be one of the ``pipe_shader_ir`` enum values. * ``PIPE_SHADER_CAP_MAX_SAMPLER_VIEWS``: The maximum number of texture sampler views. Must not be lower than PIPE_SHADER_CAP_MAX_TEXTURE_SAMPLERS. * ``PIPE_SHADER_CAP_TGSI_DROUND_SUPPORTED``: Whether double precision rounding is supported. If it is, DTRUNC/DCEIL/DFLR/DROUND opcodes may be used. * ``PIPE_SHADER_CAP_TGSI_DFRACEXP_DLDEXP_SUPPORTED``: Whether DFRACEXP and DLDEXP are supported. * ``PIPE_SHADER_CAP_TGSI_LDEXP_SUPPORTED``: Whether LDEXP is supported. * ``PIPE_SHADER_CAP_TGSI_FMA_SUPPORTED``: Whether FMA and DFMA (doubles only) are supported. * ``PIPE_SHADER_CAP_TGSI_ANY_INOUT_DECL_RANGE``: Whether the driver doesn't ignore tgsi_declaration_range::Last for shader inputs and outputs. * ``PIPE_SHADER_CAP_MAX_UNROLL_ITERATIONS_HINT``: This is the maximum number of iterations that loops are allowed to have to be unrolled. It is only a hint to state trackers. Whether any loops will be unrolled is not guaranteed. * ``PIPE_SHADER_CAP_MAX_SHADER_BUFFERS``: Maximum number of memory buffers (also used to implement atomic counters). Having this be non-0 also implies support for the ``LOAD``, ``STORE``, and ``ATOM*`` TGSI opcodes. * ``PIPE_SHADER_CAP_SUPPORTED_IRS``: Supported representations of the program. It should be a mask of ``pipe_shader_ir`` bits. * ``PIPE_SHADER_CAP_MAX_SHADER_IMAGES``: Maximum number of image units. * ``PIPE_SHADER_CAP_LOWER_IF_THRESHOLD``: IF and ELSE branches with a lower cost than this value should be lowered by the state tracker for better performance. This is a tunable for the GLSL compiler and the behavior is specific to the compiler. * ``PIPE_SHADER_CAP_TGSI_SKIP_MERGE_REGISTERS``: Whether the merge registers TGSI pass is skipped. This might reduce code size and register pressure if the underlying driver has a real backend compiler. * ``PIPE_SHADER_CAP_MAX_HW_ATOMIC_COUNTERS``: If atomic counters are separate, how many HW counters are available for this stage. (0 uses SSBO atomics). * ``PIPE_SHADER_CAP_MAX_HW_ATOMIC_COUNTER_BUFFERS``: If atomic counters are separate, how many atomic counter buffers are available for this stage. .. _pipe_compute_cap: PIPE_COMPUTE_CAP_* ^^^^^^^^^^^^^^^^^^ Compute-specific capabilities. They can be queried using pipe_screen::get_compute_param. * ``PIPE_COMPUTE_CAP_IR_TARGET``: A description of the target of the form ``processor-arch-manufacturer-os`` that will be passed on to the compiler. This CAP is only relevant for drivers that specify PIPE_SHADER_IR_NATIVE for their preferred IR. Value type: null-terminated string. Shader IR type dependent. * ``PIPE_COMPUTE_CAP_GRID_DIMENSION``: Number of supported dimensions for grid and block coordinates. Value type: ``uint64_t``. Shader IR type dependent. * ``PIPE_COMPUTE_CAP_MAX_GRID_SIZE``: Maximum grid size in block units. Value type: ``uint64_t []``. Shader IR type dependent. * ``PIPE_COMPUTE_CAP_MAX_BLOCK_SIZE``: Maximum block size in thread units. Value type: ``uint64_t []``. Shader IR type dependent. * ``PIPE_COMPUTE_CAP_MAX_THREADS_PER_BLOCK``: Maximum number of threads that a single block can contain. Value type: ``uint64_t``. Shader IR type dependent. This may be less than the product of the components of MAX_BLOCK_SIZE and is usually limited by the number of threads that can be resident simultaneously on a compute unit. * ``PIPE_COMPUTE_CAP_MAX_GLOBAL_SIZE``: Maximum size of the GLOBAL resource. Value type: ``uint64_t``. Shader IR type dependent. * ``PIPE_COMPUTE_CAP_MAX_LOCAL_SIZE``: Maximum size of the LOCAL resource. Value type: ``uint64_t``. Shader IR type dependent. * ``PIPE_COMPUTE_CAP_MAX_PRIVATE_SIZE``: Maximum size of the PRIVATE resource. Value type: ``uint64_t``. Shader IR type dependent. * ``PIPE_COMPUTE_CAP_MAX_INPUT_SIZE``: Maximum size of the INPUT resource. Value type: ``uint64_t``. Shader IR type dependent. * ``PIPE_COMPUTE_CAP_MAX_MEM_ALLOC_SIZE``: Maximum size of a memory object allocation in bytes. Value type: ``uint64_t``. * ``PIPE_COMPUTE_CAP_MAX_CLOCK_FREQUENCY``: Maximum frequency of the GPU clock in MHz. Value type: ``uint32_t`` * ``PIPE_COMPUTE_CAP_MAX_COMPUTE_UNITS``: Maximum number of compute units Value type: ``uint32_t`` * ``PIPE_COMPUTE_CAP_IMAGES_SUPPORTED``: Whether images are supported non-zero means yes, zero means no. Value type: ``uint32_t`` * ``PIPE_COMPUTE_CAP_SUBGROUP_SIZE``: The size of a basic execution unit in threads. Also known as wavefront size, warp size or SIMD width. * ``PIPE_COMPUTE_CAP_ADDRESS_BITS``: The default compute device address space size specified as an unsigned integer value in bits. * ``PIPE_COMPUTE_CAP_MAX_VARIABLE_THREADS_PER_BLOCK``: Maximum variable number of threads that a single block can contain. This is similar to PIPE_COMPUTE_CAP_MAX_THREADS_PER_BLOCK, except that the variable size is not known a compile-time but at dispatch-time. .. _pipe_bind: PIPE_BIND_* ^^^^^^^^^^^ These flags indicate how a resource will be used and are specified at resource creation time. Resources may be used in different roles during their lifecycle. Bind flags are cumulative and may be combined to create a resource which can be used for multiple things. Depending on the pipe driver's memory management and these bind flags, resources might be created and handled quite differently. * ``PIPE_BIND_RENDER_TARGET``: A color buffer or pixel buffer which will be rendered to. Any surface/resource attached to pipe_framebuffer_state::cbufs must have this flag set. * ``PIPE_BIND_DEPTH_STENCIL``: A depth (Z) buffer and/or stencil buffer. Any depth/stencil surface/resource attached to pipe_framebuffer_state::zsbuf must have this flag set. * ``PIPE_BIND_BLENDABLE``: Used in conjunction with PIPE_BIND_RENDER_TARGET to query whether a device supports blending for a given format. If this flag is set, surface creation may fail if blending is not supported for the specified format. If it is not set, a driver may choose to ignore blending on surfaces with formats that would require emulation. * ``PIPE_BIND_DISPLAY_TARGET``: A surface that can be presented to screen. Arguments to pipe_screen::flush_front_buffer must have this flag set. * ``PIPE_BIND_SAMPLER_VIEW``: A texture that may be sampled from in a fragment or vertex shader. * ``PIPE_BIND_VERTEX_BUFFER``: A vertex buffer. * ``PIPE_BIND_INDEX_BUFFER``: An vertex index/element buffer. * ``PIPE_BIND_CONSTANT_BUFFER``: A buffer of shader constants. * ``PIPE_BIND_STREAM_OUTPUT``: A stream output buffer. * ``PIPE_BIND_CUSTOM``: * ``PIPE_BIND_SCANOUT``: A front color buffer or scanout buffer. * ``PIPE_BIND_SHARED``: A sharable buffer that can be given to another process. * ``PIPE_BIND_GLOBAL``: A buffer that can be mapped into the global address space of a compute program. * ``PIPE_BIND_SHADER_BUFFER``: A buffer without a format that can be bound to a shader and can be used with load, store, and atomic instructions. * ``PIPE_BIND_SHADER_IMAGE``: A buffer or texture with a format that can be bound to a shader and can be used with load, store, and atomic instructions. * ``PIPE_BIND_COMPUTE_RESOURCE``: A buffer or texture that can be bound to the compute program as a shader resource. * ``PIPE_BIND_COMMAND_ARGS_BUFFER``: A buffer that may be sourced by the GPU command processor. It can contain, for example, the arguments to indirect draw calls. .. _pipe_usage: PIPE_USAGE_* ^^^^^^^^^^^^ The PIPE_USAGE enums are hints about the expected usage pattern of a resource. Note that drivers must always support read and write CPU access at any time no matter which hint they got. * ``PIPE_USAGE_DEFAULT``: Optimized for fast GPU access. * ``PIPE_USAGE_IMMUTABLE``: Optimized for fast GPU access and the resource is not expected to be mapped or changed (even by the GPU) after the first upload. * ``PIPE_USAGE_DYNAMIC``: Expect frequent write-only CPU access. What is uploaded is expected to be used at least several times by the GPU. * ``PIPE_USAGE_STREAM``: Expect frequent write-only CPU access. What is uploaded is expected to be used only once by the GPU. * ``PIPE_USAGE_STAGING``: Optimized for fast CPU access. Methods ------- XXX to-do get_name ^^^^^^^^ Returns an identifying name for the screen. The returned string should remain valid and immutable for the lifetime of pipe_screen. get_vendor ^^^^^^^^^^ Returns the screen vendor. The returned string should remain valid and immutable for the lifetime of pipe_screen. get_device_vendor ^^^^^^^^^^^^^^^^^ Returns the actual vendor of the device driving the screen (as opposed to the driver vendor). The returned string should remain valid and immutable for the lifetime of pipe_screen. .. _get_param: get_param ^^^^^^^^^ Get an integer/boolean screen parameter. **param** is one of the :ref:`PIPE_CAP` names. .. _get_paramf: get_paramf ^^^^^^^^^^ Get a floating-point screen parameter. **param** is one of the :ref:`PIPE_CAPF` names. context_create ^^^^^^^^^^^^^^ Create a pipe_context. **priv** is private data of the caller, which may be put to various unspecified uses, typically to do with implementing swapbuffers and/or front-buffer rendering. is_format_supported ^^^^^^^^^^^^^^^^^^^ Determine if a resource in the given format can be used in a specific manner. **format** the resource format **target** one of the PIPE_TEXTURE_x flags **sample_count** the number of samples. 0 and 1 mean no multisampling, the maximum allowed legal value is 32. **storage_sample_count** the number of storage samples. This must be <= sample_count. See the documentation of ``pipe_resource::nr_storage_samples``. **bindings** is a bitmask of :ref:`PIPE_BIND` flags. Returns TRUE if all usages can be satisfied. can_create_resource ^^^^^^^^^^^^^^^^^^^ Check if a resource can actually be created (but don't actually allocate any memory). This is used to implement OpenGL's proxy textures. Typically, a driver will simply check if the total size of the given resource is less than some limit. For PIPE_TEXTURE_CUBE, the pipe_resource::array_size field should be 6. .. _resource_create: resource_create ^^^^^^^^^^^^^^^ Create a new resource from a template. The following fields of the pipe_resource must be specified in the template: **target** one of the pipe_texture_target enums. Note that PIPE_BUFFER and PIPE_TEXTURE_X are not really fundamentally different. Modern APIs allow using buffers as shader resources. **format** one of the pipe_format enums. **width0** the width of the base mip level of the texture or size of the buffer. **height0** the height of the base mip level of the texture (1 for 1D or 1D array textures). **depth0** the depth of the base mip level of the texture (1 for everything else). **array_size** the array size for 1D and 2D array textures. For cube maps this must be 6, for other textures 1. **last_level** the last mip map level present. **nr_samples**: Number of samples determining quality, driving the rasterizer, shading, and framebuffer. It is the number of samples seen by the whole graphics pipeline. 0 and 1 specify a resource which isn't multisampled. **nr_storage_samples**: Only color buffers can set this lower than nr_samples. Multiple samples within a pixel can have the same color. ``nr_storage_samples`` determines how many slots for different colors there are per pixel. If there are not enough slots to store all sample colors, some samples will have an undefined color (called "undefined samples"). The resolve blit behavior is driver-specific, but can be one of these two: 1. Only defined samples will be averaged. Undefined samples will be ignored. 2. Undefined samples will be approximated by looking at surrounding defined samples (even in different pixels). Blits and MSAA texturing: If the sample being fetched is undefined, one of the defined samples is returned instead. Sample shading (``set_min_samples``) will operate at a sample frequency that is at most ``nr_storage_samples``. Greater ``min_samples`` values will be replaced by ``nr_storage_samples``. **usage** one of the :ref:`PIPE_USAGE` flags. **bind** bitmask of the :ref:`PIPE_BIND` flags. **flags** bitmask of PIPE_RESOURCE_FLAG flags. resource_changed ^^^^^^^^^^^^^^^^ Mark a resource as changed so derived internal resources will be recreated on next use. When importing external images that can't be directly used as texture sampler source, internal copies may have to be created that the hardware can sample from. When those resources are reimported, the image data may have changed, and the previously derived internal resources must be invalidated to avoid sampling from old copies. resource_destroy ^^^^^^^^^^^^^^^^ Destroy a resource. A resource is destroyed if it has no more references. get_timestamp ^^^^^^^^^^^^^ Query a timestamp in nanoseconds. The returned value should match PIPE_QUERY_TIMESTAMP. This function returns immediately and doesn't wait for rendering to complete (which cannot be achieved with queries). get_driver_query_info ^^^^^^^^^^^^^^^^^^^^^ Return a driver-specific query. If the **info** parameter is NULL, the number of available queries is returned. Otherwise, the driver query at the specified **index** is returned in **info**. The function returns non-zero on success. The driver-specific query is described with the pipe_driver_query_info structure. get_driver_query_group_info ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Return a driver-specific query group. If the **info** parameter is NULL, the number of available groups is returned. Otherwise, the driver query group at the specified **index** is returned in **info**. The function returns non-zero on success. The driver-specific query group is described with the pipe_driver_query_group_info structure. get_disk_shader_cache ^^^^^^^^^^^^^^^^^^^^^ Returns a pointer to a driver-specific on-disk shader cache. If the driver failed to create the cache or does not support an on-disk shader cache NULL is returned. The callback itself may also be NULL if the driver doesn't support an on-disk shader cache. Thread safety ------------- Screen methods are required to be thread safe. While gallium rendering contexts are not required to be thread safe, it is required to be safe to use different contexts created with the same screen in different threads without locks. It is also required to be safe using screen methods in a thread, while using one of its contexts in another (without locks).