.. _context: Context ======= A Gallium rendering context encapsulates the state which effects 3D rendering such as blend state, depth/stencil state, texture samplers, etc. Note that resource/texture allocation is not per-context but per-screen. Methods ------- CSO State ^^^^^^^^^ All Constant State Object (CSO) state is created, bound, and destroyed, with triplets of methods that all follow a specific naming scheme. For example, ``create_blend_state``, ``bind_blend_state``, and ``destroy_blend_state``. CSO objects handled by the context object: * :ref:`Blend`: ``*_blend_state`` * :ref:`Sampler`: Texture sampler states are bound separately for fragment, vertex, geometry and compute shaders with the ``bind_sampler_states`` function. The ``start`` and ``num_samplers`` parameters indicate a range of samplers to change. NOTE: at this time, start is always zero and the CSO module will always replace all samplers at once (no sub-ranges). This may change in the future. * :ref:`Rasterizer`: ``*_rasterizer_state`` * :ref:`depth-stencil-alpha`: ``*_depth_stencil_alpha_state`` * :ref:`Shader`: These are create, bind and destroy methods for vertex, fragment and geometry shaders. * :ref:`vertexelements`: ``*_vertex_elements_state`` Resource Binding State ^^^^^^^^^^^^^^^^^^^^^^ This state describes how resources in various flavours (textures, buffers, surfaces) are bound to the driver. * ``set_constant_buffer`` sets a constant buffer to be used for a given shader type. index is used to indicate which buffer to set (some apis may allow multiple ones to be set, and binding a specific one later, though drivers are mostly restricted to the first one right now). * ``set_framebuffer_state`` * ``set_vertex_buffers`` * ``set_index_buffer`` Non-CSO State ^^^^^^^^^^^^^ These pieces of state are too small, variable, and/or trivial to have CSO objects. They all follow simple, one-method binding calls, e.g. ``set_blend_color``. * ``set_stencil_ref`` sets the stencil front and back reference values which are used as comparison values in stencil test. * ``set_blend_color`` * ``set_sample_mask`` * ``set_clip_state`` * ``set_polygon_stipple`` * ``set_scissor_states`` sets the bounds for the scissor test, which culls pixels before blending to render targets. If the :ref:`Rasterizer` does not have the scissor test enabled, then the scissor bounds never need to be set since they will not be used. Note that scissor xmin and ymin are inclusive, but xmax and ymax are exclusive. The inclusive ranges in x and y would be [xmin..xmax-1] and [ymin..ymax-1]. The number of scissors should be the same as the number of set viewports and can be up to PIPE_MAX_VIEWPORTS. * ``set_viewport_states`` Sampler Views ^^^^^^^^^^^^^ These are the means to bind textures to shader stages. To create one, specify its format, swizzle and LOD range in sampler view template. If texture format is different than template format, it is said the texture is being cast to another format. Casting can be done only between compatible formats, that is formats that have matching component order and sizes. Swizzle fields specify they way in which fetched texel components are placed in the result register. For example, ``swizzle_r`` specifies what is going to be placed in first component of result register. The ``first_level`` and ``last_level`` fields of sampler view template specify the LOD range the texture is going to be constrained to. Note that these values are in addition to the respective min_lod, max_lod values in the pipe_sampler_state (that is if min_lod is 2.0, and first_level 3, the first mip level used for sampling from the resource is effectively the fifth). The ``first_layer`` and ``last_layer`` fields specify the layer range the texture is going to be constrained to. Similar to the LOD range, this is added to the array index which is used for sampling. * ``set_sampler_views`` binds an array of sampler views to a shader stage. Every binding point acquires a reference to a respective sampler view and releases a reference to the previous sampler view. * ``create_sampler_view`` creates a new sampler view. ``texture`` is associated with the sampler view which results in sampler view holding a reference to the texture. Format specified in template must be compatible with texture format. * ``sampler_view_destroy`` destroys a sampler view and releases its reference to associated texture. Shader Resources ^^^^^^^^^^^^^^^^ Shader resources are textures or buffers that may be read or written from a shader without an associated sampler. This means that they have no support for floating point coordinates, address wrap modes or filtering. Shader resources are specified for all the shader stages at once using the ``set_shader_resources`` method. When binding texture resources, the ``level``, ``first_layer`` and ``last_layer`` pipe_surface fields specify the mipmap level and the range of layers the texture will be constrained to. In the case of buffers, ``first_element`` and ``last_element`` specify the range within the buffer that will be used by the shader resource. Writes to a shader resource are only allowed when the ``writable`` flag is set. Surfaces ^^^^^^^^ These are the means to use resources as color render targets or depthstencil attachments. To create one, specify the mip level, the range of layers, and the bind flags (either PIPE_BIND_DEPTH_STENCIL or PIPE_BIND_RENDER_TARGET). Note that layer values are in addition to what is indicated by the geometry shader output variable XXX_FIXME (that is if first_layer is 3 and geometry shader indicates index 2, the 5th layer of the resource will be used). These first_layer and last_layer parameters will only be used for 1d array, 2d array, cube, and 3d textures otherwise they are 0. * ``create_surface`` creates a new surface. * ``surface_destroy`` destroys a surface and releases its reference to the associated resource. Stream output targets ^^^^^^^^^^^^^^^^^^^^^ Stream output, also known as transform feedback, allows writing the primitives produced by the vertex pipeline to buffers. This is done after the geometry shader or vertex shader if no geometry shader is present. The stream output targets are views into buffer resources which can be bound as stream outputs and specify a memory range where it's valid to write primitives. The pipe driver must implement memory protection such that any primitives written outside of the specified memory range are discarded. Two stream output targets can use the same resource at the same time, but with a disjoint memory range. Additionally, the stream output target internally maintains the offset into the buffer which is incremented everytime something is written to it. The internal offset is equal to how much data has already been written. It can be stored in device memory and the CPU actually doesn't have to query it. The stream output target can be used in a draw command to provide the vertex count. The vertex count is derived from the internal offset discussed above. * ``create_stream_output_target`` create a new target. * ``stream_output_target_destroy`` destroys a target. Users of this should use pipe_so_target_reference instead. * ``set_stream_output_targets`` binds stream output targets. The parameter offset is an array which specifies the internal offset of the buffer. The internal offset is, besides writing, used for reading the data during the draw_auto stage, i.e. it specifies how much data there is in the buffer for the purposes of the draw_auto stage. -1 means the buffer should be appended to, and everything else sets the internal offset. NOTE: The currently-bound vertex or geometry shader must be compiled with the properly-filled-in structure pipe_stream_output_info describing which outputs should be written to buffers and how. The structure is part of pipe_shader_state. Clearing ^^^^^^^^ Clear is one of the most difficult concepts to nail down to a single interface (due to both different requirements from APIs and also driver/hw specific differences). ``clear`` initializes some or all of the surfaces currently bound to the framebuffer to particular RGBA, depth, or stencil values. Currently, this does not take into account color or stencil write masks (as used by GL), and always clears the whole surfaces (no scissoring as used by GL clear or explicit rectangles like d3d9 uses). It can, however, also clear only depth or stencil in a combined depth/stencil surface. If a surface includes several layers then all layers will be cleared. ``clear_render_target`` clears a single color rendertarget with the specified color value. While it is only possible to clear one surface at a time (which can include several layers), this surface need not be bound to the framebuffer. ``clear_depth_stencil`` clears a single depth, stencil or depth/stencil surface with the specified depth and stencil values (for combined depth/stencil buffers, is is also possible to only clear one or the other part). While it is only possible to clear one surface at a time (which can include several layers), this surface need not be bound to the framebuffer. ``clear_buffer`` clears a PIPE_BUFFER resource with the specified clear value (which may be multiple bytes in length). Logically this is a memset with a multi-byte element value starting at offset bytes from resource start, going for size bytes. It is guaranteed that size % clear_value_size == 0. Drawing ^^^^^^^ ``draw_vbo`` draws a specified primitive. The primitive mode and other properties are described by ``pipe_draw_info``. The ``mode``, ``start``, and ``count`` fields of ``pipe_draw_info`` specify the the mode of the primitive and the vertices to be fetched, in the range between ``start`` to ``start``+``count``-1, inclusive. Every instance with instanceID in the range between ``start_instance`` and ``start_instance``+``instance_count``-1, inclusive, will be drawn. If there is an index buffer bound, and ``indexed`` field is true, all vertex indices will be looked up in the index buffer. In indexed draw, ``min_index`` and ``max_index`` respectively provide a lower and upper bound of the indices contained in the index buffer inside the range between ``start`` to ``start``+``count``-1. This allows the driver to determine which subset of vertices will be referenced during te draw call without having to scan the index buffer. Providing a over-estimation of the the true bounds, for example, a ``min_index`` and ``max_index`` of 0 and 0xffffffff respectively, must give exactly the same rendering, albeit with less performance due to unreferenced vertex buffers being unnecessarily DMA'ed or processed. Providing a underestimation of the true bounds will result in undefined behavior, but should not result in program or system failure. In case of non-indexed draw, ``min_index`` should be set to ``start`` and ``max_index`` should be set to ``start``+``count``-1. ``index_bias`` is a value added to every vertex index after lookup and before fetching vertex attributes. When drawing indexed primitives, the primitive restart index can be used to draw disjoint primitive strips. For example, several separate line strips can be drawn by designating a special index value as the restart index. The ``primitive_restart`` flag enables/disables this feature. The ``restart_index`` field specifies the restart index value. When primitive restart is in use, array indexes are compared to the restart index before adding the index_bias offset. If a given vertex element has ``instance_divisor`` set to 0, it is said it contains per-vertex data and effective vertex attribute address needs to be recalculated for every index. attribAddr = ``stride`` * index + ``src_offset`` If a given vertex element has ``instance_divisor`` set to non-zero, it is said it contains per-instance data and effective vertex attribute address needs to recalculated for every ``instance_divisor``-th instance. attribAddr = ``stride`` * instanceID / ``instance_divisor`` + ``src_offset`` In the above formulas, ``src_offset`` is taken from the given vertex element and ``stride`` is taken from a vertex buffer associated with the given vertex element. The calculated attribAddr is used as an offset into the vertex buffer to fetch the attribute data. The value of ``instanceID`` can be read in a vertex shader through a system value register declared with INSTANCEID semantic name. Queries ^^^^^^^ Queries gather some statistic from the 3D pipeline over one or more draws. Queries may be nested, though not all state trackers exercise this. Queries can be created with ``create_query`` and deleted with ``destroy_query``. To start a query, use ``begin_query``, and when finished, use ``end_query`` to end the query. ``get_query_result`` is used to retrieve the results of a query. If the ``wait`` parameter is TRUE, then the ``get_query_result`` call will block until the results of the query are ready (and TRUE will be returned). Otherwise, if the ``wait`` parameter is FALSE, the call will not block and the return value will be TRUE if the query has completed or FALSE otherwise. The interface currently includes the following types of queries: ``PIPE_QUERY_OCCLUSION_COUNTER`` counts the number of fragments which are written to the framebuffer without being culled by :ref:`depth-stencil-alpha` testing or shader KILL instructions. The result is an unsigned 64-bit integer. This query can be used with ``render_condition``. In cases where a boolean result of an occlusion query is enough, ``PIPE_QUERY_OCCLUSION_PREDICATE`` should be used. It is just like ``PIPE_QUERY_OCCLUSION_COUNTER`` except that the result is a boolean value of FALSE for cases where COUNTER would result in 0 and TRUE for all other cases. This query can be used with ``render_condition``. ``PIPE_QUERY_TIME_ELAPSED`` returns the amount of time, in nanoseconds, the context takes to perform operations. The result is an unsigned 64-bit integer. ``PIPE_QUERY_TIMESTAMP`` returns a device/driver internal timestamp, scaled to nanoseconds, recorded after all commands issued prior to ``end_query`` have been processed. This query does not require a call to ``begin_query``. The result is an unsigned 64-bit integer. ``PIPE_QUERY_TIMESTAMP_DISJOINT`` can be used to check the internal timer resolution and whether the timestamp counter has become unreliable due to things like throttling etc. - only if this is FALSE a timestamp query (within the timestamp_disjoint query) should be trusted. The result is a 64-bit integer specifying the timer resolution in Hz, followed by a boolean value indicating whether the timestamp counter is discontinuous or disjoint. ``PIPE_QUERY_PRIMITIVES_GENERATED`` returns a 64-bit integer indicating the number of primitives processed by the pipeline (regardless of whether stream output is active or not). ``PIPE_QUERY_PRIMITIVES_EMITTED`` returns a 64-bit integer indicating the number of primitives written to stream output buffers. ``PIPE_QUERY_SO_STATISTICS`` returns 2 64-bit integers corresponding to the result of ``PIPE_QUERY_PRIMITIVES_EMITTED`` and the number of primitives that would have been written to stream output buffers if they had infinite space available (primitives_storage_needed), in this order. XXX the 2nd value is equivalent to ``PIPE_QUERY_PRIMITIVES_GENERATED`` but it is unclear if it should be increased if stream output is not active. ``PIPE_QUERY_SO_OVERFLOW_PREDICATE`` returns a boolean value indicating whether the stream output targets have overflowed as a result of the commands issued between ``begin_query`` and ``end_query``. This query can be used with ``render_condition``. ``PIPE_QUERY_GPU_FINISHED`` returns a boolean value indicating whether all commands issued before ``end_query`` have completed. However, this does not imply serialization. This query does not require a call to ``begin_query``. ``PIPE_QUERY_PIPELINE_STATISTICS`` returns an array of the following 64-bit integers: Number of vertices read from vertex buffers. Number of primitives read from vertex buffers. Number of vertex shader threads launched. Number of geometry shader threads launched. Number of primitives generated by geometry shaders. Number of primitives forwarded to the rasterizer. Number of primitives rasterized. Number of fragment shader threads launched. Number of tessellation control shader threads launched. Number of tessellation evaluation shader threads launched. If a shader type is not supported by the device/driver, the corresponding values should be set to 0. Gallium does not guarantee the availability of any query types; one must always check the capabilities of the :ref:`Screen` first. Conditional Rendering ^^^^^^^^^^^^^^^^^^^^^ A drawing command can be skipped depending on the outcome of a query (typically an occlusion query, or streamout overflow predicate). The ``render_condition`` function specifies the query which should be checked prior to rendering anything. Functions honoring render_condition include (and are limited to) draw_vbo, clear, clear_render_target, clear_depth_stencil. If ``render_condition`` is called with ``query`` = NULL, conditional rendering is disabled and drawing takes place normally. If ``render_condition`` is called with a non-null ``query`` subsequent drawing commands will be predicated on the outcome of the query. Commands will be skipped if ``condition`` is equal to the predicate result (for non-boolean queries such as OCCLUSION_QUERY, zero counts as FALSE, non-zero as TRUE). If ``mode`` is PIPE_RENDER_COND_WAIT the driver will wait for the query to complete before deciding whether to render. If ``mode`` is PIPE_RENDER_COND_NO_WAIT and the query has not yet completed, the drawing command will be executed normally. If the query has completed, drawing will be predicated on the outcome of the query. If ``mode`` is PIPE_RENDER_COND_BY_REGION_WAIT or PIPE_RENDER_COND_BY_REGION_NO_WAIT rendering will be predicated as above for the non-REGION modes but in the case that an occlusion query returns a non-zero result, regions which were occluded may be ommitted by subsequent drawing commands. This can result in better performance with some GPUs. Normally, if the occlusion query returned a non-zero result subsequent drawing happens normally so fragments may be generated, shaded and processed even where they're known to be obscured. Flushing ^^^^^^^^ ``flush`` ``flush_resource`` Flush the resource cache, so that the resource can be used by an external client. Possible usage: - flushing a resource before presenting it on the screen - flushing a resource if some other process or device wants to use it This shouldn't be used to flush caches if the resource is only managed by a single pipe_screen and is not shared with another process. (i.e. you shouldn't use it to flush caches explicitly if you want to e.g. use the resource for texturing) Resource Busy Queries ^^^^^^^^^^^^^^^^^^^^^ ``is_resource_referenced`` Blitting ^^^^^^^^ These methods emulate classic blitter controls. These methods operate directly on ``pipe_resource`` objects, and stand apart from any 3D state in the context. Blitting functionality may be moved to a separate abstraction at some point in the future. ``resource_copy_region`` blits a region of a resource to a region of another resource, provided that both resources have the same format, or compatible formats, i.e., formats for which copying the bytes from the source resource unmodified to the destination resource will achieve the same effect of a textured quad blitter.. The source and destination may be the same resource, but overlapping blits are not permitted. This can be considered the equivalent of a CPU memcpy. ``blit`` blits a region of a resource to a region of another resource, including scaling, format conversion, and up-/downsampling, as well as a destination clip rectangle (scissors). As opposed to manually drawing a textured quad, this lets the pipe driver choose the optimal method for blitting (like using a special 2D engine), and usually offers, for example, accelerated stencil-only copies even where PIPE_CAP_SHADER_STENCIL_EXPORT is not available. Transfers ^^^^^^^^^ These methods are used to get data to/from a resource. ``transfer_map`` creates a memory mapping and the transfer object associated with it. The returned pointer points to the start of the mapped range according to the box region, not the beginning of the resource. If transfer_map fails, the returned pointer to the buffer memory is NULL, and the pointer to the transfer object remains unchanged (i.e. it can be non-NULL). ``transfer_unmap`` remove the memory mapping for and destroy the transfer object. The pointer into the resource should be considered invalid and discarded. ``transfer_inline_write`` performs a simplified transfer for simple writes. Basically transfer_map, data write, and transfer_unmap all in one. The box parameter to some of these functions defines a 1D, 2D or 3D region of pixels. This is self-explanatory for 1D, 2D and 3D texture targets. For PIPE_TEXTURE_1D_ARRAY and PIPE_TEXTURE_2D_ARRAY, the box::z and box::depth fields refer to the array dimension of the texture. For PIPE_TEXTURE_CUBE, the box:z and box::depth fields refer to the faces of the cube map (z + depth <= 6). For PIPE_TEXTURE_CUBE_ARRAY, the box:z and box::depth fields refer to both the face and array dimension of the texture (face = z % 6, array = z / 6). .. _transfer_flush_region: transfer_flush_region %%%%%%%%%%%%%%%%%%%%% If a transfer was created with ``FLUSH_EXPLICIT``, it will not automatically be flushed on write or unmap. Flushes must be requested with ``transfer_flush_region``. Flush ranges are relative to the mapped range, not the beginning of the resource. .. _texture_barrier: texture_barrier %%%%%%%%%%%%%%% This function flushes all pending writes to the currently-set surfaces and invalidates all read caches of the currently-set samplers. .. _memory_barrier: memory_barrier %%%%%%%%%%%%%%% This function flushes caches according to which of the PIPE_BARRIER_* flags are set. .. _pipe_transfer: PIPE_TRANSFER ^^^^^^^^^^^^^ These flags control the behavior of a transfer object. ``PIPE_TRANSFER_READ`` Resource contents read back (or accessed directly) at transfer create time. ``PIPE_TRANSFER_WRITE`` Resource contents will be written back at transfer_unmap time (or modified as a result of being accessed directly). ``PIPE_TRANSFER_MAP_DIRECTLY`` a transfer should directly map the resource. May return NULL if not supported. ``PIPE_TRANSFER_DISCARD_RANGE`` The memory within the mapped region is discarded. Cannot be used with ``PIPE_TRANSFER_READ``. ``PIPE_TRANSFER_DISCARD_WHOLE_RESOURCE`` Discards all memory backing the resource. It should not be used with ``PIPE_TRANSFER_READ``. ``PIPE_TRANSFER_DONTBLOCK`` Fail if the resource cannot be mapped immediately. ``PIPE_TRANSFER_UNSYNCHRONIZED`` Do not synchronize pending operations on the resource when mapping. The interaction of any writes to the map and any operations pending on the resource are undefined. Cannot be used with ``PIPE_TRANSFER_READ``. ``PIPE_TRANSFER_FLUSH_EXPLICIT`` Written ranges will be notified later with :ref:`transfer_flush_region`. Cannot be used with ``PIPE_TRANSFER_READ``. ``PIPE_TRANSFER_PERSISTENT`` Allows the resource to be used for rendering while mapped. PIPE_RESOURCE_FLAG_MAP_PERSISTENT must be set when creating the resource. If COHERENT is not set, memory_barrier(PIPE_BARRIER_MAPPED_BUFFER) must be called to ensure the device can see what the CPU has written. ``PIPE_TRANSFER_COHERENT`` If PERSISTENT is set, this ensures any writes done by the device are immediately visible to the CPU and vice versa. PIPE_RESOURCE_FLAG_MAP_COHERENT must be set when creating the resource. Compute kernel execution ^^^^^^^^^^^^^^^^^^^^^^^^ A compute program can be defined, bound or destroyed using ``create_compute_state``, ``bind_compute_state`` or ``destroy_compute_state`` respectively. Any of the subroutines contained within the compute program can be executed on the device using the ``launch_grid`` method. This method will execute as many instances of the program as elements in the specified N-dimensional grid, hopefully in parallel. The compute program has access to four special resources: * ``GLOBAL`` represents a memory space shared among all the threads running on the device. An arbitrary buffer created with the ``PIPE_BIND_GLOBAL`` flag can be mapped into it using the ``set_global_binding`` method. * ``LOCAL`` represents a memory space shared among all the threads running in the same working group. The initial contents of this resource are undefined. * ``PRIVATE`` represents a memory space local to a single thread. The initial contents of this resource are undefined. * ``INPUT`` represents a read-only memory space that can be initialized at ``launch_grid`` time. These resources use a byte-based addressing scheme, and they can be accessed from the compute program by means of the LOAD/STORE TGSI opcodes. Additional resources to be accessed using the same opcodes may be specified by the user with the ``set_compute_resources`` method. In addition, normal texture sampling is allowed from the compute program: ``bind_sampler_states`` may be used to set up texture samplers for the compute stage and ``set_sampler_views`` may be used to bind a number of sampler views to it.