/************************************************************************** * * Copyright 2009 VMware, Inc. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL VMWARE AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * **************************************************************************/ /** * @file * Texture sampling -- common code. * * @author Jose Fonseca */ #include "pipe/p_defines.h" #include "pipe/p_state.h" #include "util/u_format.h" #include "util/u_math.h" #include "util/u_cpu_detect.h" #include "lp_bld_arit.h" #include "lp_bld_const.h" #include "lp_bld_debug.h" #include "lp_bld_printf.h" #include "lp_bld_flow.h" #include "lp_bld_sample.h" #include "lp_bld_swizzle.h" #include "lp_bld_type.h" #include "lp_bld_logic.h" #include "lp_bld_pack.h" #include "lp_bld_quad.h" #include "lp_bld_bitarit.h" /* * Bri-linear factor. Should be greater than one. */ #define BRILINEAR_FACTOR 2 /** * Does the given texture wrap mode allow sampling the texture border color? * XXX maybe move this into gallium util code. */ boolean lp_sampler_wrap_mode_uses_border_color(unsigned mode, unsigned min_img_filter, unsigned mag_img_filter) { switch (mode) { case PIPE_TEX_WRAP_REPEAT: case PIPE_TEX_WRAP_CLAMP_TO_EDGE: case PIPE_TEX_WRAP_MIRROR_REPEAT: case PIPE_TEX_WRAP_MIRROR_CLAMP_TO_EDGE: return FALSE; case PIPE_TEX_WRAP_CLAMP: case PIPE_TEX_WRAP_MIRROR_CLAMP: if (min_img_filter == PIPE_TEX_FILTER_NEAREST && mag_img_filter == PIPE_TEX_FILTER_NEAREST) { return FALSE; } else { return TRUE; } case PIPE_TEX_WRAP_CLAMP_TO_BORDER: case PIPE_TEX_WRAP_MIRROR_CLAMP_TO_BORDER: return TRUE; default: assert(0 && "unexpected wrap mode"); return FALSE; } } /** * Initialize lp_sampler_static_texture_state object with the gallium * texture/sampler_view state (this contains the parts which are * considered static). */ void lp_sampler_static_texture_state(struct lp_static_texture_state *state, const struct pipe_sampler_view *view) { const struct pipe_resource *texture; memset(state, 0, sizeof *state); if (!view || !view->texture) return; texture = view->texture; state->format = view->format; state->swizzle_r = view->swizzle_r; state->swizzle_g = view->swizzle_g; state->swizzle_b = view->swizzle_b; state->swizzle_a = view->swizzle_a; state->target = texture->target; state->pot_width = util_is_power_of_two(texture->width0); state->pot_height = util_is_power_of_two(texture->height0); state->pot_depth = util_is_power_of_two(texture->depth0); state->level_zero_only = !view->u.tex.last_level; /* * the layer / element / level parameters are all either dynamic * state or handled transparently wrt execution. */ } /** * Initialize lp_sampler_static_sampler_state object with the gallium sampler * state (this contains the parts which are considered static). */ void lp_sampler_static_sampler_state(struct lp_static_sampler_state *state, const struct pipe_sampler_state *sampler) { memset(state, 0, sizeof *state); if (!sampler) return; /* * We don't copy sampler state over unless it is actually enabled, to avoid * spurious recompiles, as the sampler static state is part of the shader * key. * * Ideally the state tracker or cso_cache module would make all state * canonical, but until that happens it's better to be safe than sorry here. * * XXX: Actually there's much more than can be done here, especially * regarding 1D/2D/3D/CUBE textures, wrap modes, etc. */ state->wrap_s = sampler->wrap_s; state->wrap_t = sampler->wrap_t; state->wrap_r = sampler->wrap_r; state->min_img_filter = sampler->min_img_filter; state->mag_img_filter = sampler->mag_img_filter; state->seamless_cube_map = sampler->seamless_cube_map; if (sampler->max_lod > 0.0f) { state->min_mip_filter = sampler->min_mip_filter; } else { state->min_mip_filter = PIPE_TEX_MIPFILTER_NONE; } if (state->min_mip_filter != PIPE_TEX_MIPFILTER_NONE || state->min_img_filter != state->mag_img_filter) { if (sampler->lod_bias != 0.0f) { state->lod_bias_non_zero = 1; } /* If min_lod == max_lod we can greatly simplify mipmap selection. * This is a case that occurs during automatic mipmap generation. */ if (sampler->min_lod == sampler->max_lod) { state->min_max_lod_equal = 1; } else { if (sampler->min_lod > 0.0f) { state->apply_min_lod = 1; } /* * XXX this won't do anything with the mesa state tracker which always * sets max_lod to not more than actually present mip maps... */ if (sampler->max_lod < (PIPE_MAX_TEXTURE_LEVELS - 1)) { state->apply_max_lod = 1; } } } state->compare_mode = sampler->compare_mode; if (sampler->compare_mode != PIPE_TEX_COMPARE_NONE) { state->compare_func = sampler->compare_func; } state->normalized_coords = sampler->normalized_coords; } /** * Generate code to compute coordinate gradient (rho). * \param derivs partial derivatives of (s, t, r, q) with respect to X and Y * * The resulting rho has bld->levelf format (per quad or per element). */ static LLVMValueRef lp_build_rho(struct lp_build_sample_context *bld, unsigned texture_unit, LLVMValueRef s, LLVMValueRef t, LLVMValueRef r, LLVMValueRef cube_rho, const struct lp_derivatives *derivs) { struct gallivm_state *gallivm = bld->gallivm; struct lp_build_context *int_size_bld = &bld->int_size_in_bld; struct lp_build_context *float_size_bld = &bld->float_size_in_bld; struct lp_build_context *float_bld = &bld->float_bld; struct lp_build_context *coord_bld = &bld->coord_bld; struct lp_build_context *rho_bld = &bld->lodf_bld; const unsigned dims = bld->dims; LLVMValueRef ddx_ddy[2]; LLVMBuilderRef builder = bld->gallivm->builder; LLVMTypeRef i32t = LLVMInt32TypeInContext(bld->gallivm->context); LLVMValueRef index0 = LLVMConstInt(i32t, 0, 0); LLVMValueRef index1 = LLVMConstInt(i32t, 1, 0); LLVMValueRef index2 = LLVMConstInt(i32t, 2, 0); LLVMValueRef rho_vec; LLVMValueRef int_size, float_size; LLVMValueRef rho; LLVMValueRef first_level, first_level_vec; unsigned length = coord_bld->type.length; unsigned num_quads = length / 4; boolean rho_per_quad = rho_bld->type.length != length; boolean no_rho_opt = (gallivm_debug & GALLIVM_DEBUG_NO_RHO_APPROX) && (dims > 1); unsigned i; LLVMValueRef i32undef = LLVMGetUndef(LLVMInt32TypeInContext(gallivm->context)); LLVMValueRef rho_xvec, rho_yvec; /* Note that all simplified calculations will only work for isotropic filtering */ /* * rho calcs are always per quad except for explicit derivs (excluding * the messy cube maps for now) when requested. */ first_level = bld->dynamic_state->first_level(bld->dynamic_state, bld->gallivm, texture_unit); first_level_vec = lp_build_broadcast_scalar(int_size_bld, first_level); int_size = lp_build_minify(int_size_bld, bld->int_size, first_level_vec, TRUE); float_size = lp_build_int_to_float(float_size_bld, int_size); if (cube_rho) { LLVMValueRef cubesize; LLVMValueRef index0 = lp_build_const_int32(gallivm, 0); /* * Cube map code did already everything except size mul and per-quad extraction. * Luckily cube maps are always quadratic! */ if (rho_per_quad) { rho = lp_build_pack_aos_scalars(bld->gallivm, coord_bld->type, rho_bld->type, cube_rho, 0); } else { rho = lp_build_swizzle_scalar_aos(coord_bld, cube_rho, 0, 4); } /* Could optimize this for single quad just skip the broadcast */ cubesize = lp_build_extract_broadcast(gallivm, bld->float_size_in_type, rho_bld->type, float_size, index0); /* skipping sqrt hence returning rho squared */ cubesize = lp_build_mul(rho_bld, cubesize, cubesize); rho = lp_build_mul(rho_bld, cubesize, rho); } else if (derivs) { LLVMValueRef ddmax[3], ddx[3], ddy[3]; for (i = 0; i < dims; i++) { LLVMValueRef floatdim; LLVMValueRef indexi = lp_build_const_int32(gallivm, i); floatdim = lp_build_extract_broadcast(gallivm, bld->float_size_in_type, coord_bld->type, float_size, indexi); /* * note that for rho_per_quad case could reduce math (at some shuffle * cost), but for now use same code to per-pixel lod case. */ if (no_rho_opt) { ddx[i] = lp_build_mul(coord_bld, floatdim, derivs->ddx[i]); ddy[i] = lp_build_mul(coord_bld, floatdim, derivs->ddy[i]); ddx[i] = lp_build_mul(coord_bld, ddx[i], ddx[i]); ddy[i] = lp_build_mul(coord_bld, ddy[i], ddy[i]); } else { LLVMValueRef tmpx, tmpy; tmpx = lp_build_abs(coord_bld, derivs->ddx[i]); tmpy = lp_build_abs(coord_bld, derivs->ddy[i]); ddmax[i] = lp_build_max(coord_bld, tmpx, tmpy); ddmax[i] = lp_build_mul(coord_bld, floatdim, ddmax[i]); } } if (no_rho_opt) { rho_xvec = lp_build_add(coord_bld, ddx[0], ddx[1]); rho_yvec = lp_build_add(coord_bld, ddy[0], ddy[1]); if (dims > 2) { rho_xvec = lp_build_add(coord_bld, rho_xvec, ddx[2]); rho_yvec = lp_build_add(coord_bld, rho_yvec, ddy[2]); } rho = lp_build_max(coord_bld, rho_xvec, rho_yvec); /* skipping sqrt hence returning rho squared */ } else { rho = ddmax[0]; if (dims > 1) { rho = lp_build_max(coord_bld, rho, ddmax[1]); if (dims > 2) { rho = lp_build_max(coord_bld, rho, ddmax[2]); } } } if (rho_per_quad) { /* * rho_vec contains per-pixel rho, convert to scalar per quad. */ rho = lp_build_pack_aos_scalars(bld->gallivm, coord_bld->type, rho_bld->type, rho, 0); } } else { /* * This looks all a bit complex, but it's not that bad * (the shuffle code makes it look worse than it is). * Still, might not be ideal for all cases. */ static const unsigned char swizzle0[] = { /* no-op swizzle */ 0, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; static const unsigned char swizzle1[] = { 1, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; static const unsigned char swizzle2[] = { 2, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; if (dims < 2) { ddx_ddy[0] = lp_build_packed_ddx_ddy_onecoord(coord_bld, s); } else if (dims >= 2) { ddx_ddy[0] = lp_build_packed_ddx_ddy_twocoord(coord_bld, s, t); if (dims > 2) { ddx_ddy[1] = lp_build_packed_ddx_ddy_onecoord(coord_bld, r); } } if (no_rho_opt) { static const unsigned char swizzle01[] = { /* no-op swizzle */ 0, 1, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; static const unsigned char swizzle23[] = { 2, 3, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; LLVMValueRef ddx_ddys, ddx_ddyt, floatdim, shuffles[LP_MAX_VECTOR_LENGTH / 4]; for (i = 0; i < num_quads; i++) { shuffles[i*4+0] = shuffles[i*4+1] = index0; shuffles[i*4+2] = shuffles[i*4+3] = index1; } floatdim = LLVMBuildShuffleVector(builder, float_size, float_size, LLVMConstVector(shuffles, length), ""); ddx_ddy[0] = lp_build_mul(coord_bld, ddx_ddy[0], floatdim); ddx_ddy[0] = lp_build_mul(coord_bld, ddx_ddy[0], ddx_ddy[0]); ddx_ddys = lp_build_swizzle_aos(coord_bld, ddx_ddy[0], swizzle01); ddx_ddyt = lp_build_swizzle_aos(coord_bld, ddx_ddy[0], swizzle23); rho_vec = lp_build_add(coord_bld, ddx_ddys, ddx_ddyt); if (dims > 2) { static const unsigned char swizzle02[] = { 0, 2, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; floatdim = lp_build_extract_broadcast(gallivm, bld->float_size_in_type, coord_bld->type, float_size, index2); ddx_ddy[1] = lp_build_mul(coord_bld, ddx_ddy[1], floatdim); ddx_ddy[1] = lp_build_mul(coord_bld, ddx_ddy[1], ddx_ddy[1]); ddx_ddy[1] = lp_build_swizzle_aos(coord_bld, ddx_ddy[1], swizzle02); rho_vec = lp_build_add(coord_bld, rho_vec, ddx_ddy[1]); } rho_xvec = lp_build_swizzle_aos(coord_bld, rho_vec, swizzle0); rho_yvec = lp_build_swizzle_aos(coord_bld, rho_vec, swizzle1); rho = lp_build_max(coord_bld, rho_xvec, rho_yvec); if (rho_per_quad) { rho = lp_build_pack_aos_scalars(bld->gallivm, coord_bld->type, rho_bld->type, rho, 0); } else { rho = lp_build_swizzle_scalar_aos(coord_bld, rho, 0, 4); } /* skipping sqrt hence returning rho squared */ } else { ddx_ddy[0] = lp_build_abs(coord_bld, ddx_ddy[0]); if (dims > 2) { ddx_ddy[1] = lp_build_abs(coord_bld, ddx_ddy[1]); } if (dims < 2) { rho_xvec = lp_build_swizzle_aos(coord_bld, ddx_ddy[0], swizzle0); rho_yvec = lp_build_swizzle_aos(coord_bld, ddx_ddy[0], swizzle2); } else if (dims == 2) { static const unsigned char swizzle02[] = { 0, 2, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; static const unsigned char swizzle13[] = { 1, 3, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; rho_xvec = lp_build_swizzle_aos(coord_bld, ddx_ddy[0], swizzle02); rho_yvec = lp_build_swizzle_aos(coord_bld, ddx_ddy[0], swizzle13); } else { LLVMValueRef shuffles1[LP_MAX_VECTOR_LENGTH]; LLVMValueRef shuffles2[LP_MAX_VECTOR_LENGTH]; assert(dims == 3); for (i = 0; i < num_quads; i++) { shuffles1[4*i + 0] = lp_build_const_int32(gallivm, 4*i); shuffles1[4*i + 1] = lp_build_const_int32(gallivm, 4*i + 2); shuffles1[4*i + 2] = lp_build_const_int32(gallivm, length + 4*i); shuffles1[4*i + 3] = i32undef; shuffles2[4*i + 0] = lp_build_const_int32(gallivm, 4*i + 1); shuffles2[4*i + 1] = lp_build_const_int32(gallivm, 4*i + 3); shuffles2[4*i + 2] = lp_build_const_int32(gallivm, length + 4*i + 2); shuffles2[4*i + 3] = i32undef; } rho_xvec = LLVMBuildShuffleVector(builder, ddx_ddy[0], ddx_ddy[1], LLVMConstVector(shuffles1, length), ""); rho_yvec = LLVMBuildShuffleVector(builder, ddx_ddy[0], ddx_ddy[1], LLVMConstVector(shuffles2, length), ""); } rho_vec = lp_build_max(coord_bld, rho_xvec, rho_yvec); if (bld->coord_type.length > 4) { /* expand size to each quad */ if (dims > 1) { /* could use some broadcast_vector helper for this? */ LLVMValueRef src[LP_MAX_VECTOR_LENGTH/4]; for (i = 0; i < num_quads; i++) { src[i] = float_size; } float_size = lp_build_concat(bld->gallivm, src, float_size_bld->type, num_quads); } else { float_size = lp_build_broadcast_scalar(coord_bld, float_size); } rho_vec = lp_build_mul(coord_bld, rho_vec, float_size); if (dims <= 1) { rho = rho_vec; } else { if (dims >= 2) { LLVMValueRef rho_s, rho_t, rho_r; rho_s = lp_build_swizzle_aos(coord_bld, rho_vec, swizzle0); rho_t = lp_build_swizzle_aos(coord_bld, rho_vec, swizzle1); rho = lp_build_max(coord_bld, rho_s, rho_t); if (dims >= 3) { rho_r = lp_build_swizzle_aos(coord_bld, rho_vec, swizzle2); rho = lp_build_max(coord_bld, rho, rho_r); } } } if (rho_per_quad) { rho = lp_build_pack_aos_scalars(bld->gallivm, coord_bld->type, rho_bld->type, rho, 0); } else { rho = lp_build_swizzle_scalar_aos(coord_bld, rho, 0, 4); } } else { if (dims <= 1) { rho_vec = LLVMBuildExtractElement(builder, rho_vec, index0, ""); } rho_vec = lp_build_mul(float_size_bld, rho_vec, float_size); if (dims <= 1) { rho = rho_vec; } else { if (dims >= 2) { LLVMValueRef rho_s, rho_t, rho_r; rho_s = LLVMBuildExtractElement(builder, rho_vec, index0, ""); rho_t = LLVMBuildExtractElement(builder, rho_vec, index1, ""); rho = lp_build_max(float_bld, rho_s, rho_t); if (dims >= 3) { rho_r = LLVMBuildExtractElement(builder, rho_vec, index2, ""); rho = lp_build_max(float_bld, rho, rho_r); } } } if (!rho_per_quad) { rho = lp_build_broadcast_scalar(rho_bld, rho); } } } } return rho; } /* * Bri-linear lod computation * * Use a piece-wise linear approximation of log2 such that: * - round to nearest, for values in the neighborhood of -1, 0, 1, 2, etc. * - linear approximation for values in the neighborhood of 0.5, 1.5., etc, * with the steepness specified in 'factor' * - exact result for 0.5, 1.5, etc. * * * 1.0 - /----* * / * / * / * 0.5 - * * / * / * / * 0.0 - *----/ * * | | * 2^0 2^1 * * This is a technique also commonly used in hardware: * - http://ixbtlabs.com/articles2/gffx/nv40-rx800-3.html * * TODO: For correctness, this should only be applied when texture is known to * have regular mipmaps, i.e., mipmaps derived from the base level. * * TODO: This could be done in fixed point, where applicable. */ static void lp_build_brilinear_lod(struct lp_build_context *bld, LLVMValueRef lod, double factor, LLVMValueRef *out_lod_ipart, LLVMValueRef *out_lod_fpart) { LLVMValueRef lod_fpart; double pre_offset = (factor - 0.5)/factor - 0.5; double post_offset = 1 - factor; if (0) { lp_build_printf(bld->gallivm, "lod = %f\n", lod); } lod = lp_build_add(bld, lod, lp_build_const_vec(bld->gallivm, bld->type, pre_offset)); lp_build_ifloor_fract(bld, lod, out_lod_ipart, &lod_fpart); lod_fpart = lp_build_mul(bld, lod_fpart, lp_build_const_vec(bld->gallivm, bld->type, factor)); lod_fpart = lp_build_add(bld, lod_fpart, lp_build_const_vec(bld->gallivm, bld->type, post_offset)); /* * It's not necessary to clamp lod_fpart since: * - the above expression will never produce numbers greater than one. * - the mip filtering branch is only taken if lod_fpart is positive */ *out_lod_fpart = lod_fpart; if (0) { lp_build_printf(bld->gallivm, "lod_ipart = %i\n", *out_lod_ipart); lp_build_printf(bld->gallivm, "lod_fpart = %f\n\n", *out_lod_fpart); } } /* * Combined log2 and brilinear lod computation. * * It's in all identical to calling lp_build_fast_log2() and * lp_build_brilinear_lod() above, but by combining we can compute the integer * and fractional part independently. */ static void lp_build_brilinear_rho(struct lp_build_context *bld, LLVMValueRef rho, double factor, LLVMValueRef *out_lod_ipart, LLVMValueRef *out_lod_fpart) { LLVMValueRef lod_ipart; LLVMValueRef lod_fpart; const double pre_factor = (2*factor - 0.5)/(M_SQRT2*factor); const double post_offset = 1 - 2*factor; assert(bld->type.floating); assert(lp_check_value(bld->type, rho)); /* * The pre factor will make the intersections with the exact powers of two * happen precisely where we want them to be, which means that the integer * part will not need any post adjustments. */ rho = lp_build_mul(bld, rho, lp_build_const_vec(bld->gallivm, bld->type, pre_factor)); /* ipart = ifloor(log2(rho)) */ lod_ipart = lp_build_extract_exponent(bld, rho, 0); /* fpart = rho / 2**ipart */ lod_fpart = lp_build_extract_mantissa(bld, rho); lod_fpart = lp_build_mul(bld, lod_fpart, lp_build_const_vec(bld->gallivm, bld->type, factor)); lod_fpart = lp_build_add(bld, lod_fpart, lp_build_const_vec(bld->gallivm, bld->type, post_offset)); /* * Like lp_build_brilinear_lod, it's not necessary to clamp lod_fpart since: * - the above expression will never produce numbers greater than one. * - the mip filtering branch is only taken if lod_fpart is positive */ *out_lod_ipart = lod_ipart; *out_lod_fpart = lod_fpart; } /** * Fast implementation of iround(log2(sqrt(x))), based on * log2(x^n) == n*log2(x). * * Gives accurate results all the time. * (Could be trivially extended to handle other power-of-two roots.) */ static LLVMValueRef lp_build_ilog2_sqrt(struct lp_build_context *bld, LLVMValueRef x) { LLVMBuilderRef builder = bld->gallivm->builder; LLVMValueRef ipart; struct lp_type i_type = lp_int_type(bld->type); LLVMValueRef one = lp_build_const_int_vec(bld->gallivm, i_type, 1); assert(bld->type.floating); assert(lp_check_value(bld->type, x)); /* ipart = log2(x) + 0.5 = 0.5*(log2(x^2) + 1.0) */ ipart = lp_build_extract_exponent(bld, x, 1); ipart = LLVMBuildAShr(builder, ipart, one, ""); return ipart; } /** * Generate code to compute texture level of detail (lambda). * \param derivs partial derivatives of (s, t, r, q) with respect to X and Y * \param lod_bias optional float vector with the shader lod bias * \param explicit_lod optional float vector with the explicit lod * \param cube_rho rho calculated by cube coord mapping (optional) * \param out_lod_ipart integer part of lod * \param out_lod_fpart float part of lod (never larger than 1 but may be negative) * \param out_lod_positive (mask) if lod is positive (i.e. texture is minified) * * The resulting lod can be scalar per quad or be per element. */ void lp_build_lod_selector(struct lp_build_sample_context *bld, unsigned texture_unit, unsigned sampler_unit, LLVMValueRef s, LLVMValueRef t, LLVMValueRef r, LLVMValueRef cube_rho, const struct lp_derivatives *derivs, LLVMValueRef lod_bias, /* optional */ LLVMValueRef explicit_lod, /* optional */ unsigned mip_filter, LLVMValueRef *out_lod_ipart, LLVMValueRef *out_lod_fpart, LLVMValueRef *out_lod_positive) { LLVMBuilderRef builder = bld->gallivm->builder; struct lp_build_context *lodf_bld = &bld->lodf_bld; LLVMValueRef lod; *out_lod_ipart = bld->lodi_bld.zero; *out_lod_positive = bld->lodi_bld.zero; *out_lod_fpart = lodf_bld->zero; /* * For determining min/mag, we follow GL 4.1 spec, 3.9.12 Texture Magnification: * "Implementations may either unconditionally assume c = 0 for the minification * vs. magnification switch-over point, or may choose to make c depend on the * combination of minification and magnification modes as follows: if the * magnification filter is given by LINEAR and the minification filter is given * by NEAREST_MIPMAP_NEAREST or NEAREST_MIPMAP_LINEAR, then c = 0.5. This is * done to ensure that a minified texture does not appear "sharper" than a * magnified texture. Otherwise c = 0." * And 3.9.11 Texture Minification: * "If lod is less than or equal to the constant c (see section 3.9.12) the * texture is said to be magnified; if it is greater, the texture is minified." * So, using 0 as switchover point always, and using magnification for lod == 0. * Note that the always c = 0 behavior is new (first appearing in GL 3.1 spec), * old GL versions required 0.5 for the modes listed above. * I have no clue about the (undocumented) wishes of d3d9/d3d10 here! */ if (bld->static_sampler_state->min_max_lod_equal) { /* User is forcing sampling from a particular mipmap level. * This is hit during mipmap generation. */ LLVMValueRef min_lod = bld->dynamic_state->min_lod(bld->dynamic_state, bld->gallivm, sampler_unit); lod = lp_build_broadcast_scalar(lodf_bld, min_lod); } else { if (explicit_lod) { if (bld->num_lods != bld->coord_type.length) lod = lp_build_pack_aos_scalars(bld->gallivm, bld->coord_bld.type, lodf_bld->type, explicit_lod, 0); else lod = explicit_lod; } else { LLVMValueRef rho; boolean rho_squared = ((gallivm_debug & GALLIVM_DEBUG_NO_RHO_APPROX) && (bld->dims > 1)) || cube_rho; rho = lp_build_rho(bld, texture_unit, s, t, r, cube_rho, derivs); /* * Compute lod = log2(rho) */ if (!lod_bias && !bld->static_sampler_state->lod_bias_non_zero && !bld->static_sampler_state->apply_max_lod && !bld->static_sampler_state->apply_min_lod) { /* * Special case when there are no post-log2 adjustments, which * saves instructions but keeping the integer and fractional lod * computations separate from the start. */ if (mip_filter == PIPE_TEX_MIPFILTER_NONE || mip_filter == PIPE_TEX_MIPFILTER_NEAREST) { /* * Don't actually need both values all the time, lod_ipart is * needed for nearest mipfilter, lod_positive if min != mag. */ if (rho_squared) { *out_lod_ipart = lp_build_ilog2_sqrt(lodf_bld, rho); } else { *out_lod_ipart = lp_build_ilog2(lodf_bld, rho); } *out_lod_positive = lp_build_cmp(lodf_bld, PIPE_FUNC_GREATER, rho, lodf_bld->one); return; } if (mip_filter == PIPE_TEX_MIPFILTER_LINEAR && !(gallivm_debug & GALLIVM_DEBUG_NO_BRILINEAR) && !rho_squared) { /* * This can't work if rho is squared. Not sure if it could be * fixed while keeping it worthwile, could also do sqrt here * but brilinear and no_rho_opt seems like a combination not * making much sense anyway so just use ordinary path below. */ lp_build_brilinear_rho(lodf_bld, rho, BRILINEAR_FACTOR, out_lod_ipart, out_lod_fpart); *out_lod_positive = lp_build_cmp(lodf_bld, PIPE_FUNC_GREATER, rho, lodf_bld->one); return; } } if (0) { lod = lp_build_log2(lodf_bld, rho); } else { lod = lp_build_fast_log2(lodf_bld, rho); } if (rho_squared) { /* log2(x^2) == 0.5*log2(x) */ lod = lp_build_mul(lodf_bld, lod, lp_build_const_vec(bld->gallivm, lodf_bld->type, 0.5F)); } /* add shader lod bias */ if (lod_bias) { if (bld->num_lods != bld->coord_type.length) lod_bias = lp_build_pack_aos_scalars(bld->gallivm, bld->coord_bld.type, lodf_bld->type, lod_bias, 0); lod = LLVMBuildFAdd(builder, lod, lod_bias, "shader_lod_bias"); } } /* add sampler lod bias */ if (bld->static_sampler_state->lod_bias_non_zero) { LLVMValueRef sampler_lod_bias = bld->dynamic_state->lod_bias(bld->dynamic_state, bld->gallivm, sampler_unit); sampler_lod_bias = lp_build_broadcast_scalar(lodf_bld, sampler_lod_bias); lod = LLVMBuildFAdd(builder, lod, sampler_lod_bias, "sampler_lod_bias"); } /* clamp lod */ if (bld->static_sampler_state->apply_max_lod) { LLVMValueRef max_lod = bld->dynamic_state->max_lod(bld->dynamic_state, bld->gallivm, sampler_unit); max_lod = lp_build_broadcast_scalar(lodf_bld, max_lod); lod = lp_build_min(lodf_bld, lod, max_lod); } if (bld->static_sampler_state->apply_min_lod) { LLVMValueRef min_lod = bld->dynamic_state->min_lod(bld->dynamic_state, bld->gallivm, sampler_unit); min_lod = lp_build_broadcast_scalar(lodf_bld, min_lod); lod = lp_build_max(lodf_bld, lod, min_lod); } } *out_lod_positive = lp_build_cmp(lodf_bld, PIPE_FUNC_GREATER, lod, lodf_bld->zero); if (mip_filter == PIPE_TEX_MIPFILTER_LINEAR) { if (!(gallivm_debug & GALLIVM_DEBUG_NO_BRILINEAR)) { lp_build_brilinear_lod(lodf_bld, lod, BRILINEAR_FACTOR, out_lod_ipart, out_lod_fpart); } else { lp_build_ifloor_fract(lodf_bld, lod, out_lod_ipart, out_lod_fpart); } lp_build_name(*out_lod_fpart, "lod_fpart"); } else { *out_lod_ipart = lp_build_iround(lodf_bld, lod); } lp_build_name(*out_lod_ipart, "lod_ipart"); return; } /** * For PIPE_TEX_MIPFILTER_NEAREST, convert int part of lod * to actual mip level. * Note: this is all scalar per quad code. * \param lod_ipart int texture level of detail * \param level_out returns integer * \param out_of_bounds returns per coord out_of_bounds mask if provided */ void lp_build_nearest_mip_level(struct lp_build_sample_context *bld, unsigned texture_unit, LLVMValueRef lod_ipart, LLVMValueRef *level_out, LLVMValueRef *out_of_bounds) { struct lp_build_context *leveli_bld = &bld->leveli_bld; LLVMValueRef first_level, last_level, level; first_level = bld->dynamic_state->first_level(bld->dynamic_state, bld->gallivm, texture_unit); last_level = bld->dynamic_state->last_level(bld->dynamic_state, bld->gallivm, texture_unit); first_level = lp_build_broadcast_scalar(leveli_bld, first_level); last_level = lp_build_broadcast_scalar(leveli_bld, last_level); level = lp_build_add(leveli_bld, lod_ipart, first_level); if (out_of_bounds) { LLVMValueRef out, out1; out = lp_build_cmp(leveli_bld, PIPE_FUNC_LESS, level, first_level); out1 = lp_build_cmp(leveli_bld, PIPE_FUNC_GREATER, level, last_level); out = lp_build_or(leveli_bld, out, out1); if (bld->num_mips == bld->coord_bld.type.length) { *out_of_bounds = out; } else if (bld->num_mips == 1) { *out_of_bounds = lp_build_broadcast_scalar(&bld->int_coord_bld, out); } else { assert(bld->num_mips == bld->coord_bld.type.length / 4); *out_of_bounds = lp_build_unpack_broadcast_aos_scalars(bld->gallivm, leveli_bld->type, bld->int_coord_bld.type, out); } level = lp_build_andnot(&bld->int_coord_bld, level, *out_of_bounds); *level_out = level; } else { /* clamp level to legal range of levels */ *level_out = lp_build_clamp(leveli_bld, level, first_level, last_level); } } /** * For PIPE_TEX_MIPFILTER_LINEAR, convert per-quad (or per element) int LOD(s) * to two (per-quad) (adjacent) mipmap level indexes, and fix up float lod * part accordingly. * Later, we'll sample from those two mipmap levels and interpolate between them. */ void lp_build_linear_mip_levels(struct lp_build_sample_context *bld, unsigned texture_unit, LLVMValueRef lod_ipart, LLVMValueRef *lod_fpart_inout, LLVMValueRef *level0_out, LLVMValueRef *level1_out) { LLVMBuilderRef builder = bld->gallivm->builder; struct lp_build_context *leveli_bld = &bld->leveli_bld; struct lp_build_context *levelf_bld = &bld->levelf_bld; LLVMValueRef first_level, last_level; LLVMValueRef clamp_min; LLVMValueRef clamp_max; assert(bld->num_lods == bld->num_mips); first_level = bld->dynamic_state->first_level(bld->dynamic_state, bld->gallivm, texture_unit); last_level = bld->dynamic_state->last_level(bld->dynamic_state, bld->gallivm, texture_unit); first_level = lp_build_broadcast_scalar(leveli_bld, first_level); last_level = lp_build_broadcast_scalar(leveli_bld, last_level); *level0_out = lp_build_add(leveli_bld, lod_ipart, first_level); *level1_out = lp_build_add(leveli_bld, *level0_out, leveli_bld->one); /* * Clamp both *level0_out and *level1_out to [first_level, last_level], with * the minimum number of comparisons, and zeroing lod_fpart in the extreme * ends in the process. */ /* *level0_out < first_level */ clamp_min = LLVMBuildICmp(builder, LLVMIntSLT, *level0_out, first_level, "clamp_lod_to_first"); *level0_out = LLVMBuildSelect(builder, clamp_min, first_level, *level0_out, ""); *level1_out = LLVMBuildSelect(builder, clamp_min, first_level, *level1_out, ""); *lod_fpart_inout = LLVMBuildSelect(builder, clamp_min, levelf_bld->zero, *lod_fpart_inout, ""); /* *level0_out >= last_level */ clamp_max = LLVMBuildICmp(builder, LLVMIntSGE, *level0_out, last_level, "clamp_lod_to_last"); *level0_out = LLVMBuildSelect(builder, clamp_max, last_level, *level0_out, ""); *level1_out = LLVMBuildSelect(builder, clamp_max, last_level, *level1_out, ""); *lod_fpart_inout = LLVMBuildSelect(builder, clamp_max, levelf_bld->zero, *lod_fpart_inout, ""); lp_build_name(*level0_out, "texture%u_miplevel0", texture_unit); lp_build_name(*level1_out, "texture%u_miplevel1", texture_unit); lp_build_name(*lod_fpart_inout, "texture%u_mipweight", texture_unit); } /** * Return pointer to a single mipmap level. * \param level integer mipmap level */ LLVMValueRef lp_build_get_mipmap_level(struct lp_build_sample_context *bld, LLVMValueRef level) { LLVMBuilderRef builder = bld->gallivm->builder; LLVMValueRef indexes[2], data_ptr, mip_offset; indexes[0] = lp_build_const_int32(bld->gallivm, 0); indexes[1] = level; mip_offset = LLVMBuildGEP(builder, bld->mip_offsets, indexes, 2, ""); mip_offset = LLVMBuildLoad(builder, mip_offset, ""); data_ptr = LLVMBuildGEP(builder, bld->base_ptr, &mip_offset, 1, ""); return data_ptr; } /** * Return (per-pixel) offsets to mip levels. * \param level integer mipmap level */ LLVMValueRef lp_build_get_mip_offsets(struct lp_build_sample_context *bld, LLVMValueRef level) { LLVMBuilderRef builder = bld->gallivm->builder; LLVMValueRef indexes[2], offsets, offset1; indexes[0] = lp_build_const_int32(bld->gallivm, 0); if (bld->num_mips == 1) { indexes[1] = level; offset1 = LLVMBuildGEP(builder, bld->mip_offsets, indexes, 2, ""); offset1 = LLVMBuildLoad(builder, offset1, ""); offsets = lp_build_broadcast_scalar(&bld->int_coord_bld, offset1); } else if (bld->num_mips == bld->coord_bld.type.length / 4) { unsigned i; offsets = bld->int_coord_bld.undef; for (i = 0; i < bld->num_mips; i++) { LLVMValueRef indexi = lp_build_const_int32(bld->gallivm, i); LLVMValueRef indexo = lp_build_const_int32(bld->gallivm, 4 * i); indexes[1] = LLVMBuildExtractElement(builder, level, indexi, ""); offset1 = LLVMBuildGEP(builder, bld->mip_offsets, indexes, 2, ""); offset1 = LLVMBuildLoad(builder, offset1, ""); offsets = LLVMBuildInsertElement(builder, offsets, offset1, indexo, ""); } offsets = lp_build_swizzle_scalar_aos(&bld->int_coord_bld, offsets, 0, 4); } else { unsigned i; assert (bld->num_mips == bld->coord_bld.type.length); offsets = bld->int_coord_bld.undef; for (i = 0; i < bld->num_mips; i++) { LLVMValueRef indexi = lp_build_const_int32(bld->gallivm, i); indexes[1] = LLVMBuildExtractElement(builder, level, indexi, ""); offset1 = LLVMBuildGEP(builder, bld->mip_offsets, indexes, 2, ""); offset1 = LLVMBuildLoad(builder, offset1, ""); offsets = LLVMBuildInsertElement(builder, offsets, offset1, indexi, ""); } } return offsets; } /** * Codegen equivalent for u_minify(). * @param lod_scalar if lod is a (broadcasted) scalar * Return max(1, base_size >> level); */ LLVMValueRef lp_build_minify(struct lp_build_context *bld, LLVMValueRef base_size, LLVMValueRef level, boolean lod_scalar) { LLVMBuilderRef builder = bld->gallivm->builder; assert(lp_check_value(bld->type, base_size)); assert(lp_check_value(bld->type, level)); if (level == bld->zero) { /* if we're using mipmap level zero, no minification is needed */ return base_size; } else { LLVMValueRef size; assert(bld->type.sign); if (lod_scalar || (util_cpu_caps.has_avx2 || !util_cpu_caps.has_sse)) { size = LLVMBuildLShr(builder, base_size, level, "minify"); size = lp_build_max(bld, size, bld->one); } else { /* * emulate shift with float mul, since intel "forgot" shifts with * per-element shift count until avx2, which results in terrible * scalar extraction (both count and value), scalar shift, * vector reinsertion. Should not be an issue on any non-x86 cpu * with a vector instruction set. * On cpus with AMD's XOP this should also be unnecessary but I'm * not sure if llvm would emit this with current flags. */ LLVMValueRef const127, const23, lf; struct lp_type ftype; struct lp_build_context fbld; ftype = lp_type_float_vec(32, bld->type.length * bld->type.width); lp_build_context_init(&fbld, bld->gallivm, ftype); const127 = lp_build_const_int_vec(bld->gallivm, bld->type, 127); const23 = lp_build_const_int_vec(bld->gallivm, bld->type, 23); /* calculate 2^(-level) float */ lf = lp_build_sub(bld, const127, level); lf = lp_build_shl(bld, lf, const23); lf = LLVMBuildBitCast(builder, lf, fbld.vec_type, ""); /* finish shift operation by doing float mul */ base_size = lp_build_int_to_float(&fbld, base_size); size = lp_build_mul(&fbld, base_size, lf); /* * do the max also with floats because * a) non-emulated int max requires sse41 * (this is actually a lie as we could cast to 16bit values * as 16bit is sufficient and 16bit int max is sse2) * b) with avx we can do int max 4-wide but float max 8-wide */ size = lp_build_max(&fbld, size, fbld.one); size = lp_build_itrunc(&fbld, size); } return size; } } /** * Dereference stride_array[mipmap_level] array to get a stride. * Return stride as a vector. */ static LLVMValueRef lp_build_get_level_stride_vec(struct lp_build_sample_context *bld, LLVMValueRef stride_array, LLVMValueRef level) { LLVMBuilderRef builder = bld->gallivm->builder; LLVMValueRef indexes[2], stride, stride1; indexes[0] = lp_build_const_int32(bld->gallivm, 0); if (bld->num_mips == 1) { indexes[1] = level; stride1 = LLVMBuildGEP(builder, stride_array, indexes, 2, ""); stride1 = LLVMBuildLoad(builder, stride1, ""); stride = lp_build_broadcast_scalar(&bld->int_coord_bld, stride1); } else if (bld->num_mips == bld->coord_bld.type.length / 4) { LLVMValueRef stride1; unsigned i; stride = bld->int_coord_bld.undef; for (i = 0; i < bld->num_mips; i++) { LLVMValueRef indexi = lp_build_const_int32(bld->gallivm, i); LLVMValueRef indexo = lp_build_const_int32(bld->gallivm, 4 * i); indexes[1] = LLVMBuildExtractElement(builder, level, indexi, ""); stride1 = LLVMBuildGEP(builder, stride_array, indexes, 2, ""); stride1 = LLVMBuildLoad(builder, stride1, ""); stride = LLVMBuildInsertElement(builder, stride, stride1, indexo, ""); } stride = lp_build_swizzle_scalar_aos(&bld->int_coord_bld, stride, 0, 4); } else { LLVMValueRef stride1; unsigned i; assert (bld->num_mips == bld->coord_bld.type.length); stride = bld->int_coord_bld.undef; for (i = 0; i < bld->coord_bld.type.length; i++) { LLVMValueRef indexi = lp_build_const_int32(bld->gallivm, i); indexes[1] = LLVMBuildExtractElement(builder, level, indexi, ""); stride1 = LLVMBuildGEP(builder, stride_array, indexes, 2, ""); stride1 = LLVMBuildLoad(builder, stride1, ""); stride = LLVMBuildInsertElement(builder, stride, stride1, indexi, ""); } } return stride; } /** * When sampling a mipmap, we need to compute the width, height, depth * of the source levels from the level indexes. This helper function * does that. */ void lp_build_mipmap_level_sizes(struct lp_build_sample_context *bld, LLVMValueRef ilevel, LLVMValueRef *out_size, LLVMValueRef *row_stride_vec, LLVMValueRef *img_stride_vec) { const unsigned dims = bld->dims; LLVMValueRef ilevel_vec; /* * Compute width, height, depth at mipmap level 'ilevel' */ if (bld->num_mips == 1) { ilevel_vec = lp_build_broadcast_scalar(&bld->int_size_bld, ilevel); *out_size = lp_build_minify(&bld->int_size_bld, bld->int_size, ilevel_vec, TRUE); } else { LLVMValueRef int_size_vec; LLVMValueRef tmp[LP_MAX_VECTOR_LENGTH]; unsigned num_quads = bld->coord_bld.type.length / 4; unsigned i; if (bld->num_mips == num_quads) { /* * XXX: this should be #ifndef SANE_INSTRUCTION_SET. * intel "forgot" the variable shift count instruction until avx2. * A harmless 8x32 shift gets translated into 32 instructions * (16 extracts, 8 scalar shifts, 8 inserts), llvm is apparently * unable to recognize if there are really just 2 different shift * count values. So do the shift 4-wide before expansion. */ struct lp_build_context bld4; struct lp_type type4; type4 = bld->int_coord_bld.type; type4.length = 4; lp_build_context_init(&bld4, bld->gallivm, type4); if (bld->dims == 1) { assert(bld->int_size_in_bld.type.length == 1); int_size_vec = lp_build_broadcast_scalar(&bld4, bld->int_size); } else { assert(bld->int_size_in_bld.type.length == 4); int_size_vec = bld->int_size; } for (i = 0; i < num_quads; i++) { LLVMValueRef ileveli; LLVMValueRef indexi = lp_build_const_int32(bld->gallivm, i); ileveli = lp_build_extract_broadcast(bld->gallivm, bld->leveli_bld.type, bld4.type, ilevel, indexi); tmp[i] = lp_build_minify(&bld4, int_size_vec, ileveli, TRUE); } /* * out_size is [w0, h0, d0, _, w1, h1, d1, _, ...] vector for dims > 1, * [w0, w0, w0, w0, w1, w1, w1, w1, ...] otherwise. */ *out_size = lp_build_concat(bld->gallivm, tmp, bld4.type, num_quads); } else { /* FIXME: this is terrible and results in _huge_ vector * (for the dims > 1 case). * Should refactor this (together with extract_image_sizes) and do * something more useful. Could for instance if we have width,height * with 4-wide vector pack all elements into a 8xi16 vector * (on which we can still do useful math) instead of using a 16xi32 * vector. * For dims == 1 this will create [w0, w1, w2, w3, ...] vector. * For dims > 1 this will create [w0, h0, d0, _, w1, h1, d1, _, ...] vector. */ assert(bld->num_mips == bld->coord_bld.type.length); if (bld->dims == 1) { assert(bld->int_size_in_bld.type.length == 1); int_size_vec = lp_build_broadcast_scalar(&bld->int_coord_bld, bld->int_size); *out_size = lp_build_minify(&bld->int_coord_bld, int_size_vec, ilevel, FALSE); } else { LLVMValueRef ilevel1; for (i = 0; i < bld->num_mips; i++) { LLVMValueRef indexi = lp_build_const_int32(bld->gallivm, i); ilevel1 = lp_build_extract_broadcast(bld->gallivm, bld->int_coord_type, bld->int_size_in_bld.type, ilevel, indexi); tmp[i] = bld->int_size; tmp[i] = lp_build_minify(&bld->int_size_in_bld, tmp[i], ilevel1, TRUE); } *out_size = lp_build_concat(bld->gallivm, tmp, bld->int_size_in_bld.type, bld->num_mips); } } } if (dims >= 2) { *row_stride_vec = lp_build_get_level_stride_vec(bld, bld->row_stride_array, ilevel); } if (dims == 3 || has_layer_coord(bld->static_texture_state->target)) { *img_stride_vec = lp_build_get_level_stride_vec(bld, bld->img_stride_array, ilevel); } } /** * Extract and broadcast texture size. * * @param size_type type of the texture size vector (either * bld->int_size_type or bld->float_size_type) * @param coord_type type of the texture size vector (either * bld->int_coord_type or bld->coord_type) * @param size vector with the texture size (width, height, depth) */ void lp_build_extract_image_sizes(struct lp_build_sample_context *bld, struct lp_build_context *size_bld, struct lp_type coord_type, LLVMValueRef size, LLVMValueRef *out_width, LLVMValueRef *out_height, LLVMValueRef *out_depth) { const unsigned dims = bld->dims; LLVMTypeRef i32t = LLVMInt32TypeInContext(bld->gallivm->context); struct lp_type size_type = size_bld->type; if (bld->num_mips == 1) { *out_width = lp_build_extract_broadcast(bld->gallivm, size_type, coord_type, size, LLVMConstInt(i32t, 0, 0)); if (dims >= 2) { *out_height = lp_build_extract_broadcast(bld->gallivm, size_type, coord_type, size, LLVMConstInt(i32t, 1, 0)); if (dims == 3) { *out_depth = lp_build_extract_broadcast(bld->gallivm, size_type, coord_type, size, LLVMConstInt(i32t, 2, 0)); } } } else { unsigned num_quads = bld->coord_bld.type.length / 4; if (dims == 1) { *out_width = size; } else if (bld->num_mips == num_quads) { *out_width = lp_build_swizzle_scalar_aos(size_bld, size, 0, 4); if (dims >= 2) { *out_height = lp_build_swizzle_scalar_aos(size_bld, size, 1, 4); if (dims == 3) { *out_depth = lp_build_swizzle_scalar_aos(size_bld, size, 2, 4); } } } else { assert(bld->num_mips == bld->coord_type.length); *out_width = lp_build_pack_aos_scalars(bld->gallivm, size_type, coord_type, size, 0); if (dims >= 2) { *out_height = lp_build_pack_aos_scalars(bld->gallivm, size_type, coord_type, size, 1); if (dims == 3) { *out_depth = lp_build_pack_aos_scalars(bld->gallivm, size_type, coord_type, size, 2); } } } } } /** * Unnormalize coords. * * @param flt_size vector with the integer texture size (width, height, depth) */ void lp_build_unnormalized_coords(struct lp_build_sample_context *bld, LLVMValueRef flt_size, LLVMValueRef *s, LLVMValueRef *t, LLVMValueRef *r) { const unsigned dims = bld->dims; LLVMValueRef width; LLVMValueRef height; LLVMValueRef depth; lp_build_extract_image_sizes(bld, &bld->float_size_bld, bld->coord_type, flt_size, &width, &height, &depth); /* s = s * width, t = t * height */ *s = lp_build_mul(&bld->coord_bld, *s, width); if (dims >= 2) { *t = lp_build_mul(&bld->coord_bld, *t, height); if (dims >= 3) { *r = lp_build_mul(&bld->coord_bld, *r, depth); } } } /** * Generate new coords and faces for cubemap texels falling off the face. * * @param face face (center) of the pixel * @param x0 lower x coord * @param x1 higher x coord (must be x0 + 1) * @param y0 lower y coord * @param y1 higher y coord (must be x0 + 1) * @param max_coord texture cube (level) size - 1 * @param next_faces new face values when falling off * @param next_xcoords new x coord values when falling off * @param next_ycoords new y coord values when falling off * * The arrays hold the new values when under/overflow of * lower x, higher x, lower y, higher y coord would occur (in this order). * next_xcoords/next_ycoords have two entries each (for both new lower and * higher coord). */ void lp_build_cube_new_coords(struct lp_build_context *ivec_bld, LLVMValueRef face, LLVMValueRef x0, LLVMValueRef x1, LLVMValueRef y0, LLVMValueRef y1, LLVMValueRef max_coord, LLVMValueRef next_faces[4], LLVMValueRef next_xcoords[4][2], LLVMValueRef next_ycoords[4][2]) { /* * Lookup tables aren't nice for simd code hence try some logic here. * (Note that while it would not be necessary to do per-sample (4) lookups * when using a LUT as it's impossible that texels fall off of positive * and negative edges simultaneously, it would however be necessary to * do 2 lookups for corner handling as in this case texels both fall off * of x and y axes.) */ /* * Next faces (for face 012345): * x < 0.0 : 451110 * x >= 1.0 : 540001 * y < 0.0 : 225422 * y >= 1.0 : 334533 * Hence nfx+ (and nfy+) == nfx- (nfy-) xor 1 * nfx-: face > 1 ? (face == 5 ? 0 : 1) : (4 + face & 1) * nfy+: face & ~4 > 1 ? face + 2 : 3; * This could also use pshufb instead, but would need (manually coded) * ssse3 intrinsic (llvm won't do non-constant shuffles). */ struct gallivm_state *gallivm = ivec_bld->gallivm; LLVMValueRef sel, sel_f2345, sel_f23, sel_f2, tmpsel, tmp; LLVMValueRef faceand1, sel_fand1, maxmx0, maxmx1, maxmy0, maxmy1; LLVMValueRef c2 = lp_build_const_int_vec(gallivm, ivec_bld->type, 2); LLVMValueRef c3 = lp_build_const_int_vec(gallivm, ivec_bld->type, 3); LLVMValueRef c4 = lp_build_const_int_vec(gallivm, ivec_bld->type, 4); LLVMValueRef c5 = lp_build_const_int_vec(gallivm, ivec_bld->type, 5); sel = lp_build_cmp(ivec_bld, PIPE_FUNC_EQUAL, face, c5); tmpsel = lp_build_select(ivec_bld, sel, ivec_bld->zero, ivec_bld->one); sel_f2345 = lp_build_cmp(ivec_bld, PIPE_FUNC_GREATER, face, ivec_bld->one); faceand1 = lp_build_and(ivec_bld, face, ivec_bld->one); tmp = lp_build_add(ivec_bld, faceand1, c4); next_faces[0] = lp_build_select(ivec_bld, sel_f2345, tmpsel, tmp); next_faces[1] = lp_build_xor(ivec_bld, next_faces[0], ivec_bld->one); tmp = lp_build_andnot(ivec_bld, face, c4); sel_f23 = lp_build_cmp(ivec_bld, PIPE_FUNC_GREATER, tmp, ivec_bld->one); tmp = lp_build_add(ivec_bld, face, c2); next_faces[3] = lp_build_select(ivec_bld, sel_f23, tmp, c3); next_faces[2] = lp_build_xor(ivec_bld, next_faces[3], ivec_bld->one); /* * new xcoords (for face 012345): * x < 0.0 : max max t max-t max max * x >= 1.0 : 0 0 max-t t 0 0 * y < 0.0 : max 0 max-s s s max-s * y >= 1.0 : max 0 s max-s s max-s * * ncx[1] = face & ~4 > 1 ? (face == 2 ? max-t : t) : 0 * ncx[0] = max - ncx[1] * ncx[3] = face > 1 ? (face & 1 ? max-s : s) : (face & 1) ? 0 : max * ncx[2] = face & ~4 > 1 ? max - ncx[3] : ncx[3] */ sel_f2 = lp_build_cmp(ivec_bld, PIPE_FUNC_EQUAL, face, c2); maxmy0 = lp_build_sub(ivec_bld, max_coord, y0); tmp = lp_build_select(ivec_bld, sel_f2, maxmy0, y0); next_xcoords[1][0] = lp_build_select(ivec_bld, sel_f23, tmp, ivec_bld->zero); next_xcoords[0][0] = lp_build_sub(ivec_bld, max_coord, next_xcoords[1][0]); maxmy1 = lp_build_sub(ivec_bld, max_coord, y1); tmp = lp_build_select(ivec_bld, sel_f2, maxmy1, y1); next_xcoords[1][1] = lp_build_select(ivec_bld, sel_f23, tmp, ivec_bld->zero); next_xcoords[0][1] = lp_build_sub(ivec_bld, max_coord, next_xcoords[1][1]); sel_fand1 = lp_build_cmp(ivec_bld, PIPE_FUNC_EQUAL, faceand1, ivec_bld->one); tmpsel = lp_build_select(ivec_bld, sel_fand1, ivec_bld->zero, max_coord); maxmx0 = lp_build_sub(ivec_bld, max_coord, x0); tmp = lp_build_select(ivec_bld, sel_fand1, maxmx0, x0); next_xcoords[3][0] = lp_build_select(ivec_bld, sel_f2345, tmp, tmpsel); tmp = lp_build_sub(ivec_bld, max_coord, next_xcoords[3][0]); next_xcoords[2][0] = lp_build_select(ivec_bld, sel_f23, tmp, next_xcoords[3][0]); maxmx1 = lp_build_sub(ivec_bld, max_coord, x1); tmp = lp_build_select(ivec_bld, sel_fand1, maxmx1, x1); next_xcoords[3][1] = lp_build_select(ivec_bld, sel_f2345, tmp, tmpsel); tmp = lp_build_sub(ivec_bld, max_coord, next_xcoords[3][1]); next_xcoords[2][1] = lp_build_select(ivec_bld, sel_f23, tmp, next_xcoords[3][1]); /* * new ycoords (for face 012345): * x < 0.0 : t t 0 max t t * x >= 1.0 : t t 0 max t t * y < 0.0 : max-s s 0 max max 0 * y >= 1.0 : s max-s 0 max 0 max * * ncy[0] = face & ~4 > 1 ? (face == 2 ? 0 : max) : t * ncy[1] = ncy[0] * ncy[3] = face > 1 ? (face & 1 ? max : 0) : (face & 1) ? max-s : max * ncx[2] = face & ~4 > 1 ? max - ncx[3] : ncx[3] */ tmp = lp_build_select(ivec_bld, sel_f2, ivec_bld->zero, max_coord); next_ycoords[0][0] = lp_build_select(ivec_bld, sel_f23, tmp, y0); next_ycoords[1][0] = next_ycoords[0][0]; next_ycoords[0][1] = lp_build_select(ivec_bld, sel_f23, tmp, y1); next_ycoords[1][1] = next_ycoords[0][1]; tmpsel = lp_build_select(ivec_bld, sel_fand1, maxmx0, x0); tmp = lp_build_select(ivec_bld, sel_fand1, max_coord, ivec_bld->zero); next_ycoords[3][0] = lp_build_select(ivec_bld, sel_f2345, tmp, tmpsel); tmp = lp_build_sub(ivec_bld, max_coord, next_ycoords[3][0]); next_ycoords[2][0] = lp_build_select(ivec_bld, sel_f23, next_ycoords[3][0], tmp); tmpsel = lp_build_select(ivec_bld, sel_fand1, maxmx1, x1); tmp = lp_build_select(ivec_bld, sel_fand1, max_coord, ivec_bld->zero); next_ycoords[3][1] = lp_build_select(ivec_bld, sel_f2345, tmp, tmpsel); tmp = lp_build_sub(ivec_bld, max_coord, next_ycoords[3][1]); next_ycoords[2][1] = lp_build_select(ivec_bld, sel_f23, next_ycoords[3][1], tmp); } /** Helper used by lp_build_cube_lookup() */ static LLVMValueRef lp_build_cube_imapos(struct lp_build_context *coord_bld, LLVMValueRef coord) { /* ima = +0.5 / abs(coord); */ LLVMValueRef posHalf = lp_build_const_vec(coord_bld->gallivm, coord_bld->type, 0.5); LLVMValueRef absCoord = lp_build_abs(coord_bld, coord); LLVMValueRef ima = lp_build_div(coord_bld, posHalf, absCoord); return ima; } /** Helper for doing 3-wise selection. * Returns sel1 ? val2 : (sel0 ? val0 : val1). */ static LLVMValueRef lp_build_select3(struct lp_build_context *sel_bld, LLVMValueRef sel0, LLVMValueRef sel1, LLVMValueRef val0, LLVMValueRef val1, LLVMValueRef val2) { LLVMValueRef tmp; tmp = lp_build_select(sel_bld, sel0, val0, val1); return lp_build_select(sel_bld, sel1, val2, tmp); } /** * Generate code to do cube face selection and compute per-face texcoords. */ void lp_build_cube_lookup(struct lp_build_sample_context *bld, LLVMValueRef *coords, const struct lp_derivatives *derivs_in, /* optional */ LLVMValueRef *rho, struct lp_derivatives *derivs_out, /* optional */ boolean need_derivs) { struct lp_build_context *coord_bld = &bld->coord_bld; LLVMBuilderRef builder = bld->gallivm->builder; struct gallivm_state *gallivm = bld->gallivm; LLVMValueRef si, ti, ri; /* * Do per-pixel face selection. We cannot however (as we used to do) * simply calculate the derivs afterwards (which is very bogus for * explicit derivs btw) because the values would be "random" when * not all pixels lie on the same face. So what we do here is just * calculate the derivatives after scaling the coords by the absolute * value of the inverse major axis, and essentially do rho calculation * steps as if it were a 3d texture. This is perfect if all pixels hit * the same face, but not so great at edges, I believe the max error * should be sqrt(2) with no_rho_approx or 2 otherwise (essentially measuring * the 3d distance between 2 points on the cube instead of measuring up/down * the edge). Still this is possibly a win over just selecting the same face * for all pixels. Unfortunately, something like that doesn't work for * explicit derivatives. */ struct lp_build_context *cint_bld = &bld->int_coord_bld; struct lp_type intctype = cint_bld->type; LLVMTypeRef coord_vec_type = coord_bld->vec_type; LLVMTypeRef cint_vec_type = cint_bld->vec_type; LLVMValueRef as, at, ar, face, face_s, face_t; LLVMValueRef as_ge_at, maxasat, ar_ge_as_at; LLVMValueRef snewx, tnewx, snewy, tnewy, snewz, tnewz; LLVMValueRef tnegi, rnegi; LLVMValueRef ma, mai, signma, signmabit, imahalfpos; LLVMValueRef posHalf = lp_build_const_vec(gallivm, coord_bld->type, 0.5); LLVMValueRef signmask = lp_build_const_int_vec(gallivm, intctype, 1 << (intctype.width - 1)); LLVMValueRef signshift = lp_build_const_int_vec(gallivm, intctype, intctype.width -1); LLVMValueRef facex = lp_build_const_int_vec(gallivm, intctype, PIPE_TEX_FACE_POS_X); LLVMValueRef facey = lp_build_const_int_vec(gallivm, intctype, PIPE_TEX_FACE_POS_Y); LLVMValueRef facez = lp_build_const_int_vec(gallivm, intctype, PIPE_TEX_FACE_POS_Z); LLVMValueRef s = coords[0]; LLVMValueRef t = coords[1]; LLVMValueRef r = coords[2]; assert(PIPE_TEX_FACE_NEG_X == PIPE_TEX_FACE_POS_X + 1); assert(PIPE_TEX_FACE_NEG_Y == PIPE_TEX_FACE_POS_Y + 1); assert(PIPE_TEX_FACE_NEG_Z == PIPE_TEX_FACE_POS_Z + 1); /* * get absolute value (for x/y/z face selection) and sign bit * (for mirroring minor coords and pos/neg face selection) * of the original coords. */ as = lp_build_abs(&bld->coord_bld, s); at = lp_build_abs(&bld->coord_bld, t); ar = lp_build_abs(&bld->coord_bld, r); /* * major face determination: select x if x > y else select y * select z if z >= max(x,y) else select previous result * if some axis are the same we chose z over y, y over x - the * dx10 spec seems to ask for it while OpenGL doesn't care (if we * wouldn't care could save a select or two if using different * compares and doing at_g_as_ar last since tnewx and tnewz are the * same). */ as_ge_at = lp_build_cmp(coord_bld, PIPE_FUNC_GREATER, as, at); maxasat = lp_build_max(coord_bld, as, at); ar_ge_as_at = lp_build_cmp(coord_bld, PIPE_FUNC_GEQUAL, ar, maxasat); if (need_derivs && (derivs_in || ((gallivm_debug & GALLIVM_DEBUG_NO_QUAD_LOD) && (gallivm_debug & GALLIVM_DEBUG_NO_RHO_APPROX)))) { /* * XXX: This is really really complex. * It is a bit overkill to use this for implicit derivatives as well, * no way this is worth the cost in practice, but seems to be the * only way for getting accurate and per-pixel lod values. */ LLVMValueRef ima, imahalf, tmp, ddx[3], ddy[3]; LLVMValueRef madx, mady, madxdivma, madydivma; LLVMValueRef sdxi, tdxi, rdxi, sdyi, tdyi, rdyi; LLVMValueRef tdxnegi, rdxnegi, tdynegi, rdynegi; LLVMValueRef sdxnewx, sdxnewy, sdxnewz, tdxnewx, tdxnewy, tdxnewz; LLVMValueRef sdynewx, sdynewy, sdynewz, tdynewx, tdynewy, tdynewz; LLVMValueRef face_sdx, face_tdx, face_sdy, face_tdy; /* * s = 1/2 * ( sc / ma + 1) * t = 1/2 * ( tc / ma + 1) * * s' = 1/2 * (sc' * ma - sc * ma') / ma^2 * t' = 1/2 * (tc' * ma - tc * ma') / ma^2 * * dx.s = 0.5 * (dx.sc - sc * dx.ma / ma) / ma * dx.t = 0.5 * (dx.tc - tc * dx.ma / ma) / ma * dy.s = 0.5 * (dy.sc - sc * dy.ma / ma) / ma * dy.t = 0.5 * (dy.tc - tc * dy.ma / ma) / ma */ /* select ma, calculate ima */ ma = lp_build_select3(coord_bld, as_ge_at, ar_ge_as_at, s, t, r); mai = LLVMBuildBitCast(builder, ma, cint_vec_type, ""); signmabit = LLVMBuildAnd(builder, mai, signmask, ""); ima = lp_build_div(coord_bld, coord_bld->one, ma); imahalf = lp_build_mul(coord_bld, posHalf, ima); imahalfpos = lp_build_abs(coord_bld, imahalf); if (!derivs_in) { ddx[0] = lp_build_ddx(coord_bld, s); ddx[1] = lp_build_ddx(coord_bld, t); ddx[2] = lp_build_ddx(coord_bld, r); ddy[0] = lp_build_ddy(coord_bld, s); ddy[1] = lp_build_ddy(coord_bld, t); ddy[2] = lp_build_ddy(coord_bld, r); } else { ddx[0] = derivs_in->ddx[0]; ddx[1] = derivs_in->ddx[1]; ddx[2] = derivs_in->ddx[2]; ddy[0] = derivs_in->ddy[0]; ddy[1] = derivs_in->ddy[1]; ddy[2] = derivs_in->ddy[2]; } /* select major derivatives */ madx = lp_build_select3(coord_bld, as_ge_at, ar_ge_as_at, ddx[0], ddx[1], ddx[2]); mady = lp_build_select3(coord_bld, as_ge_at, ar_ge_as_at, ddy[0], ddy[1], ddy[2]); si = LLVMBuildBitCast(builder, s, cint_vec_type, ""); ti = LLVMBuildBitCast(builder, t, cint_vec_type, ""); ri = LLVMBuildBitCast(builder, r, cint_vec_type, ""); sdxi = LLVMBuildBitCast(builder, ddx[0], cint_vec_type, ""); tdxi = LLVMBuildBitCast(builder, ddx[1], cint_vec_type, ""); rdxi = LLVMBuildBitCast(builder, ddx[2], cint_vec_type, ""); sdyi = LLVMBuildBitCast(builder, ddy[0], cint_vec_type, ""); tdyi = LLVMBuildBitCast(builder, ddy[1], cint_vec_type, ""); rdyi = LLVMBuildBitCast(builder, ddy[2], cint_vec_type, ""); /* * compute all possible new s/t coords, which does the mirroring, * and do the same for derivs minor axes. * snewx = signma * -r; * tnewx = -t; * snewy = s; * tnewy = signma * r; * snewz = signma * s; * tnewz = -t; */ tnegi = LLVMBuildXor(builder, ti, signmask, ""); rnegi = LLVMBuildXor(builder, ri, signmask, ""); tdxnegi = LLVMBuildXor(builder, tdxi, signmask, ""); rdxnegi = LLVMBuildXor(builder, rdxi, signmask, ""); tdynegi = LLVMBuildXor(builder, tdyi, signmask, ""); rdynegi = LLVMBuildXor(builder, rdyi, signmask, ""); snewx = LLVMBuildXor(builder, signmabit, rnegi, ""); tnewx = tnegi; sdxnewx = LLVMBuildXor(builder, signmabit, rdxnegi, ""); tdxnewx = tdxnegi; sdynewx = LLVMBuildXor(builder, signmabit, rdynegi, ""); tdynewx = tdynegi; snewy = si; tnewy = LLVMBuildXor(builder, signmabit, ri, ""); sdxnewy = sdxi; tdxnewy = LLVMBuildXor(builder, signmabit, rdxi, ""); sdynewy = sdyi; tdynewy = LLVMBuildXor(builder, signmabit, rdyi, ""); snewz = LLVMBuildXor(builder, signmabit, si, ""); tnewz = tnegi; sdxnewz = LLVMBuildXor(builder, signmabit, sdxi, ""); tdxnewz = tdxnegi; sdynewz = LLVMBuildXor(builder, signmabit, sdyi, ""); tdynewz = tdynegi; /* select the mirrored values */ face = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, facex, facey, facez); face_s = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, snewx, snewy, snewz); face_t = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, tnewx, tnewy, tnewz); face_sdx = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, sdxnewx, sdxnewy, sdxnewz); face_tdx = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, tdxnewx, tdxnewy, tdxnewz); face_sdy = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, sdynewx, sdynewy, sdynewz); face_tdy = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, tdynewx, tdynewy, tdynewz); face_s = LLVMBuildBitCast(builder, face_s, coord_vec_type, ""); face_t = LLVMBuildBitCast(builder, face_t, coord_vec_type, ""); face_sdx = LLVMBuildBitCast(builder, face_sdx, coord_vec_type, ""); face_tdx = LLVMBuildBitCast(builder, face_tdx, coord_vec_type, ""); face_sdy = LLVMBuildBitCast(builder, face_sdy, coord_vec_type, ""); face_tdy = LLVMBuildBitCast(builder, face_tdy, coord_vec_type, ""); /* deriv math, dx.s = 0.5 * (dx.sc - sc * dx.ma / ma) / ma */ madxdivma = lp_build_mul(coord_bld, madx, ima); tmp = lp_build_mul(coord_bld, madxdivma, face_s); tmp = lp_build_sub(coord_bld, face_sdx, tmp); derivs_out->ddx[0] = lp_build_mul(coord_bld, tmp, imahalf); /* dx.t = 0.5 * (dx.tc - tc * dx.ma / ma) / ma */ tmp = lp_build_mul(coord_bld, madxdivma, face_t); tmp = lp_build_sub(coord_bld, face_tdx, tmp); derivs_out->ddx[1] = lp_build_mul(coord_bld, tmp, imahalf); /* dy.s = 0.5 * (dy.sc - sc * dy.ma / ma) / ma */ madydivma = lp_build_mul(coord_bld, mady, ima); tmp = lp_build_mul(coord_bld, madydivma, face_s); tmp = lp_build_sub(coord_bld, face_sdy, tmp); derivs_out->ddy[0] = lp_build_mul(coord_bld, tmp, imahalf); /* dy.t = 0.5 * (dy.tc - tc * dy.ma / ma) / ma */ tmp = lp_build_mul(coord_bld, madydivma, face_t); tmp = lp_build_sub(coord_bld, face_tdy, tmp); derivs_out->ddy[1] = lp_build_mul(coord_bld, tmp, imahalf); signma = LLVMBuildLShr(builder, mai, signshift, ""); coords[2] = LLVMBuildOr(builder, face, signma, "face"); /* project coords */ face_s = lp_build_mul(coord_bld, face_s, imahalfpos); face_t = lp_build_mul(coord_bld, face_t, imahalfpos); coords[0] = lp_build_add(coord_bld, face_s, posHalf); coords[1] = lp_build_add(coord_bld, face_t, posHalf); return; } else if (need_derivs) { LLVMValueRef ddx_ddy[2], tmp[3], rho_vec; static const unsigned char swizzle0[] = { /* no-op swizzle */ 0, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; static const unsigned char swizzle1[] = { 1, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; static const unsigned char swizzle01[] = { /* no-op swizzle */ 0, 1, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; static const unsigned char swizzle23[] = { 2, 3, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; static const unsigned char swizzle02[] = { 0, 2, LP_BLD_SWIZZLE_DONTCARE, LP_BLD_SWIZZLE_DONTCARE }; /* * scale the s/t/r coords pre-select/mirror so we can calculate * "reasonable" derivs. */ ma = lp_build_select3(coord_bld, as_ge_at, ar_ge_as_at, s, t, r); imahalfpos = lp_build_cube_imapos(coord_bld, ma); s = lp_build_mul(coord_bld, s, imahalfpos); t = lp_build_mul(coord_bld, t, imahalfpos); r = lp_build_mul(coord_bld, r, imahalfpos); /* * This isn't quite the same as the "ordinary" (3d deriv) path since we * know the texture is square which simplifies things (we can omit the * size mul which happens very early completely here and do it at the * very end). * Also always do calculations according to GALLIVM_DEBUG_NO_RHO_APPROX * since the error can get quite big otherwise at edges. * (With no_rho_approx max error is sqrt(2) at edges, same as it is * without no_rho_approx for 2d textures, otherwise it would be factor 2.) */ ddx_ddy[0] = lp_build_packed_ddx_ddy_twocoord(coord_bld, s, t); ddx_ddy[1] = lp_build_packed_ddx_ddy_onecoord(coord_bld, r); ddx_ddy[0] = lp_build_mul(coord_bld, ddx_ddy[0], ddx_ddy[0]); ddx_ddy[1] = lp_build_mul(coord_bld, ddx_ddy[1], ddx_ddy[1]); tmp[0] = lp_build_swizzle_aos(coord_bld, ddx_ddy[0], swizzle01); tmp[1] = lp_build_swizzle_aos(coord_bld, ddx_ddy[0], swizzle23); tmp[2] = lp_build_swizzle_aos(coord_bld, ddx_ddy[1], swizzle02); rho_vec = lp_build_add(coord_bld, tmp[0], tmp[1]); rho_vec = lp_build_add(coord_bld, rho_vec, tmp[2]); tmp[0] = lp_build_swizzle_aos(coord_bld, rho_vec, swizzle0); tmp[1] = lp_build_swizzle_aos(coord_bld, rho_vec, swizzle1); *rho = lp_build_max(coord_bld, tmp[0], tmp[1]); } if (!need_derivs) { ma = lp_build_select3(coord_bld, as_ge_at, ar_ge_as_at, s, t, r); } mai = LLVMBuildBitCast(builder, ma, cint_vec_type, ""); signmabit = LLVMBuildAnd(builder, mai, signmask, ""); si = LLVMBuildBitCast(builder, s, cint_vec_type, ""); ti = LLVMBuildBitCast(builder, t, cint_vec_type, ""); ri = LLVMBuildBitCast(builder, r, cint_vec_type, ""); /* * compute all possible new s/t coords, which does the mirroring * snewx = signma * -r; * tnewx = -t; * snewy = s; * tnewy = signma * r; * snewz = signma * s; * tnewz = -t; */ tnegi = LLVMBuildXor(builder, ti, signmask, ""); rnegi = LLVMBuildXor(builder, ri, signmask, ""); snewx = LLVMBuildXor(builder, signmabit, rnegi, ""); tnewx = tnegi; snewy = si; tnewy = LLVMBuildXor(builder, signmabit, ri, ""); snewz = LLVMBuildXor(builder, signmabit, si, ""); tnewz = tnegi; /* select the mirrored values */ face_s = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, snewx, snewy, snewz); face_t = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, tnewx, tnewy, tnewz); face = lp_build_select3(cint_bld, as_ge_at, ar_ge_as_at, facex, facey, facez); face_s = LLVMBuildBitCast(builder, face_s, coord_vec_type, ""); face_t = LLVMBuildBitCast(builder, face_t, coord_vec_type, ""); /* add +1 for neg face */ /* XXX with AVX probably want to use another select here - * as long as we ensure vblendvps gets used we can actually * skip the comparison and just use sign as a "mask" directly. */ signma = LLVMBuildLShr(builder, mai, signshift, ""); coords[2] = LLVMBuildOr(builder, face, signma, "face"); /* project coords */ if (!need_derivs) { imahalfpos = lp_build_cube_imapos(coord_bld, ma); face_s = lp_build_mul(coord_bld, face_s, imahalfpos); face_t = lp_build_mul(coord_bld, face_t, imahalfpos); } coords[0] = lp_build_add(coord_bld, face_s, posHalf); coords[1] = lp_build_add(coord_bld, face_t, posHalf); } /** * Compute the partial offset of a pixel block along an arbitrary axis. * * @param coord coordinate in pixels * @param stride number of bytes between rows of successive pixel blocks * @param block_length number of pixels in a pixels block along the coordinate * axis * @param out_offset resulting relative offset of the pixel block in bytes * @param out_subcoord resulting sub-block pixel coordinate */ void lp_build_sample_partial_offset(struct lp_build_context *bld, unsigned block_length, LLVMValueRef coord, LLVMValueRef stride, LLVMValueRef *out_offset, LLVMValueRef *out_subcoord) { LLVMBuilderRef builder = bld->gallivm->builder; LLVMValueRef offset; LLVMValueRef subcoord; if (block_length == 1) { subcoord = bld->zero; } else { /* * Pixel blocks have power of two dimensions. LLVM should convert the * rem/div to bit arithmetic. * TODO: Verify this. * It does indeed BUT it does transform it to scalar (and back) when doing so * (using roughly extract, shift/and, mov, unpack) (llvm 2.7). * The generated code looks seriously unfunny and is quite expensive. */ #if 0 LLVMValueRef block_width = lp_build_const_int_vec(bld->type, block_length); subcoord = LLVMBuildURem(builder, coord, block_width, ""); coord = LLVMBuildUDiv(builder, coord, block_width, ""); #else unsigned logbase2 = util_logbase2(block_length); LLVMValueRef block_shift = lp_build_const_int_vec(bld->gallivm, bld->type, logbase2); LLVMValueRef block_mask = lp_build_const_int_vec(bld->gallivm, bld->type, block_length - 1); subcoord = LLVMBuildAnd(builder, coord, block_mask, ""); coord = LLVMBuildLShr(builder, coord, block_shift, ""); #endif } offset = lp_build_mul(bld, coord, stride); assert(out_offset); assert(out_subcoord); *out_offset = offset; *out_subcoord = subcoord; } /** * Compute the offset of a pixel block. * * x, y, z, y_stride, z_stride are vectors, and they refer to pixels. * * Returns the relative offset and i,j sub-block coordinates */ void lp_build_sample_offset(struct lp_build_context *bld, const struct util_format_description *format_desc, LLVMValueRef x, LLVMValueRef y, LLVMValueRef z, LLVMValueRef y_stride, LLVMValueRef z_stride, LLVMValueRef *out_offset, LLVMValueRef *out_i, LLVMValueRef *out_j) { LLVMValueRef x_stride; LLVMValueRef offset; x_stride = lp_build_const_vec(bld->gallivm, bld->type, format_desc->block.bits/8); lp_build_sample_partial_offset(bld, format_desc->block.width, x, x_stride, &offset, out_i); if (y && y_stride) { LLVMValueRef y_offset; lp_build_sample_partial_offset(bld, format_desc->block.height, y, y_stride, &y_offset, out_j); offset = lp_build_add(bld, offset, y_offset); } else { *out_j = bld->zero; } if (z && z_stride) { LLVMValueRef z_offset; LLVMValueRef k; lp_build_sample_partial_offset(bld, 1, /* pixel blocks are always 2D */ z, z_stride, &z_offset, &k); offset = lp_build_add(bld, offset, z_offset); } *out_offset = offset; }