# # Copyright (C) 2018 Red Hat # Copyright (C) 2014 Intel Corporation # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice (including the next # paragraph) shall be included in all copies or substantial portions of the # Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING # FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS # IN THE SOFTWARE. # # This file defines all the available intrinsics in one place. # # The Intrinsic class corresponds one-to-one with nir_intrinsic_info # structure. class Intrinsic(object): """Class that represents all the information about an intrinsic opcode. NOTE: this must be kept in sync with nir_intrinsic_info. """ def __init__(self, name, src_components, dest_components, indices, flags, sysval, bit_sizes): """Parameters: - name: the intrinsic name - src_components: list of the number of components per src, 0 means vectorized instruction with number of components given in the num_components field in nir_intrinsic_instr. - dest_components: number of destination components, -1 means no dest, 0 means number of components given in num_components field in nir_intrinsic_instr. - indices: list of constant indicies - flags: list of semantic flags - sysval: is this a system-value intrinsic - bit_sizes: allowed dest bit_sizes """ assert isinstance(name, str) assert isinstance(src_components, list) if src_components: assert isinstance(src_components[0], int) assert isinstance(dest_components, int) assert isinstance(indices, list) if indices: assert isinstance(indices[0], str) assert isinstance(flags, list) if flags: assert isinstance(flags[0], str) assert isinstance(sysval, bool) if bit_sizes: assert isinstance(bit_sizes[0], int) self.name = name self.num_srcs = len(src_components) self.src_components = src_components self.has_dest = (dest_components >= 0) self.dest_components = dest_components self.num_indices = len(indices) self.indices = indices self.flags = flags self.sysval = sysval self.bit_sizes = bit_sizes # # Possible indices: # # A constant 'base' value that is added to an offset src: BASE = "NIR_INTRINSIC_BASE" # For store instructions, a writemask: WRMASK = "NIR_INTRINSIC_WRMASK" # The stream-id for GS emit_vertex/end_primitive intrinsics: STREAM_ID = "NIR_INTRINSIC_STREAM_ID" # The clip-plane id for load_user_clip_plane intrinsics: UCP_ID = "NIR_INTRINSIC_UCP_ID" # The amount of data, starting from BASE, that this instruction # may access. This is used to provide bounds if the offset is # not constant. RANGE = "NIR_INTRINSIC_RANGE" # The vulkan descriptor set binding for vulkan_resource_index # intrinsic DESC_SET = "NIR_INTRINSIC_DESC_SET" # The vulkan descriptor set binding for vulkan_resource_index # intrinsic BINDING = "NIR_INTRINSIC_BINDING" # Component offset COMPONENT = "NIR_INTRINSIC_COMPONENT" # Interpolation mode (only meaningful for FS inputs) INTERP_MODE = "NIR_INTRINSIC_INTERP_MODE" # A binary nir_op to use when performing a reduction or scan operation REDUCTION_OP = "NIR_INTRINSIC_REDUCTION_OP" # Cluster size for reduction operations CLUSTER_SIZE = "NIR_INTRINSIC_CLUSTER_SIZE" # Parameter index for a load_param intrinsic PARAM_IDX = "NIR_INTRINSIC_PARAM_IDX" # Image dimensionality for image intrinsics IMAGE_DIM = "NIR_INTRINSIC_IMAGE_DIM" # Non-zero if we are accessing an array image IMAGE_ARRAY = "NIR_INTRINSIC_IMAGE_ARRAY" # Access qualifiers for image and memory access intrinsics ACCESS = "NIR_INTRINSIC_ACCESS" DST_ACCESS = "NIR_INTRINSIC_DST_ACCESS" SRC_ACCESS = "NIR_INTRINSIC_SRC_ACCESS" # Image format for image intrinsics FORMAT = "NIR_INTRINSIC_FORMAT" # Offset or address alignment ALIGN_MUL = "NIR_INTRINSIC_ALIGN_MUL" ALIGN_OFFSET = "NIR_INTRINSIC_ALIGN_OFFSET" # The vulkan descriptor type for vulkan_resource_index DESC_TYPE = "NIR_INTRINSIC_DESC_TYPE" # The nir_alu_type of a uniform/input/output TYPE = "NIR_INTRINSIC_TYPE" # The swizzle mask for quad_swizzle_amd & masked_swizzle_amd SWIZZLE_MASK = "NIR_INTRINSIC_SWIZZLE_MASK" # Driver location of attribute DRIVER_LOCATION = "NIR_INTRINSIC_DRIVER_LOCATION" # Ordering and visibility of a memory operation MEMORY_SEMANTICS = "NIR_INTRINSIC_MEMORY_SEMANTICS" # Modes affected by a memory operation MEMORY_MODES = "NIR_INTRINSIC_MEMORY_MODES" # Scope of a memory operation MEMORY_SCOPE = "NIR_INTRINSIC_MEMORY_SCOPE" # # Possible flags: # CAN_ELIMINATE = "NIR_INTRINSIC_CAN_ELIMINATE" CAN_REORDER = "NIR_INTRINSIC_CAN_REORDER" INTR_OPCODES = {} # Defines a new NIR intrinsic. By default, the intrinsic will have no sources # and no destination. # # You can set dest_comp=n to enable a destination for the intrinsic, in which # case it will have that many components, or =0 for "as many components as the # NIR destination value." # # Set src_comp=n to enable sources for the intruction. It can be an array of # component counts, or (for convenience) a scalar component count if there's # only one source. If a component count is 0, it will be as many components as # the intrinsic has based on the dest_comp. def intrinsic(name, src_comp=[], dest_comp=-1, indices=[], flags=[], sysval=False, bit_sizes=[]): assert name not in INTR_OPCODES INTR_OPCODES[name] = Intrinsic(name, src_comp, dest_comp, indices, flags, sysval, bit_sizes) intrinsic("nop", flags=[CAN_ELIMINATE]) intrinsic("load_param", dest_comp=0, indices=[PARAM_IDX], flags=[CAN_ELIMINATE]) intrinsic("load_deref", dest_comp=0, src_comp=[-1], indices=[ACCESS], flags=[CAN_ELIMINATE]) intrinsic("store_deref", src_comp=[-1, 0], indices=[WRMASK, ACCESS]) intrinsic("copy_deref", src_comp=[-1, -1], indices=[DST_ACCESS, SRC_ACCESS]) # Interpolation of input. The interp_deref_at* intrinsics are similar to the # load_var intrinsic acting on a shader input except that they interpolate the # input differently. The at_sample and at_offset intrinsics take an # additional source that is an integer sample id or a vec2 position offset # respectively. intrinsic("interp_deref_at_centroid", dest_comp=0, src_comp=[1], flags=[ CAN_ELIMINATE, CAN_REORDER]) intrinsic("interp_deref_at_sample", src_comp=[1, 1], dest_comp=0, flags=[CAN_ELIMINATE, CAN_REORDER]) intrinsic("interp_deref_at_offset", src_comp=[1, 2], dest_comp=0, flags=[CAN_ELIMINATE, CAN_REORDER]) # Gets the length of an unsized array at the end of a buffer intrinsic("deref_buffer_array_length", src_comp=[-1], dest_comp=1, flags=[CAN_ELIMINATE, CAN_REORDER]) # Ask the driver for the size of a given buffer. It takes the buffer index # as source. intrinsic("get_buffer_size", src_comp=[-1], dest_comp=1, flags=[CAN_ELIMINATE, CAN_REORDER]) # a barrier is an intrinsic with no inputs/outputs but which can't be moved # around/optimized in general def barrier(name): intrinsic(name) barrier("barrier") barrier("discard") # Demote fragment shader invocation to a helper invocation. Any stores to # memory after this instruction are suppressed and the fragment does not write # outputs to the framebuffer. Unlike discard, demote needs to ensure that # derivatives will still work for invocations that were not demoted. # # As specified by SPV_EXT_demote_to_helper_invocation. barrier("demote") intrinsic("is_helper_invocation", dest_comp=1, flags=[CAN_ELIMINATE]) # Memory barrier with semantics analogous to the memoryBarrier() GLSL # intrinsic. barrier("memory_barrier") # Memory barrier with explicit scope. Follows the semantics of SPIR-V # OpMemoryBarrier, used to implement Vulkan Memory Model. Storage that the # barrierr applies is represented using NIR variable modes. intrinsic("scoped_memory_barrier", indices=[MEMORY_SEMANTICS, MEMORY_MODES, MEMORY_SCOPE]) # Shader clock intrinsic with semantics analogous to the clock2x32ARB() # GLSL intrinsic. # The latter can be used as code motion barrier, which is currently not # feasible with NIR. intrinsic("shader_clock", dest_comp=2, flags=[CAN_ELIMINATE]) # Shader ballot intrinsics with semantics analogous to the # # ballotARB() # readInvocationARB() # readFirstInvocationARB() # # GLSL functions from ARB_shader_ballot. intrinsic("ballot", src_comp=[1], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("read_invocation", src_comp=[0, 1], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("read_first_invocation", src_comp=[0], dest_comp=0, flags=[CAN_ELIMINATE]) # Additional SPIR-V ballot intrinsics # # These correspond to the SPIR-V opcodes # # OpGroupUniformElect # OpSubgroupFirstInvocationKHR intrinsic("elect", dest_comp=1, flags=[CAN_ELIMINATE]) intrinsic("first_invocation", dest_comp=1, flags=[CAN_ELIMINATE]) # Memory barrier with semantics analogous to the compute shader # groupMemoryBarrier(), memoryBarrierAtomicCounter(), memoryBarrierBuffer(), # memoryBarrierImage() and memoryBarrierShared() GLSL intrinsics. barrier("group_memory_barrier") barrier("memory_barrier_atomic_counter") barrier("memory_barrier_buffer") barrier("memory_barrier_image") barrier("memory_barrier_shared") barrier("begin_invocation_interlock") barrier("end_invocation_interlock") # A conditional discard/demote, with a single boolean source. intrinsic("discard_if", src_comp=[1]) intrinsic("demote_if", src_comp=[1]) # ARB_shader_group_vote intrinsics intrinsic("vote_any", src_comp=[1], dest_comp=1, flags=[CAN_ELIMINATE]) intrinsic("vote_all", src_comp=[1], dest_comp=1, flags=[CAN_ELIMINATE]) intrinsic("vote_feq", src_comp=[0], dest_comp=1, flags=[CAN_ELIMINATE]) intrinsic("vote_ieq", src_comp=[0], dest_comp=1, flags=[CAN_ELIMINATE]) # Ballot ALU operations from SPIR-V. # # These operations work like their ALU counterparts except that the operate # on a uvec4 which is treated as a 128bit integer. Also, they are, in # general, free to ignore any bits which are above the subgroup size. intrinsic("ballot_bitfield_extract", src_comp=[4, 1], dest_comp=1, flags=[CAN_ELIMINATE]) intrinsic("ballot_bit_count_reduce", src_comp=[4], dest_comp=1, flags=[CAN_ELIMINATE]) intrinsic("ballot_bit_count_inclusive", src_comp=[4], dest_comp=1, flags=[CAN_ELIMINATE]) intrinsic("ballot_bit_count_exclusive", src_comp=[4], dest_comp=1, flags=[CAN_ELIMINATE]) intrinsic("ballot_find_lsb", src_comp=[4], dest_comp=1, flags=[CAN_ELIMINATE]) intrinsic("ballot_find_msb", src_comp=[4], dest_comp=1, flags=[CAN_ELIMINATE]) # Shuffle operations from SPIR-V. intrinsic("shuffle", src_comp=[0, 1], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("shuffle_xor", src_comp=[0, 1], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("shuffle_up", src_comp=[0, 1], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("shuffle_down", src_comp=[0, 1], dest_comp=0, flags=[CAN_ELIMINATE]) # Quad operations from SPIR-V. intrinsic("quad_broadcast", src_comp=[0, 1], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("quad_swap_horizontal", src_comp=[0], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("quad_swap_vertical", src_comp=[0], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("quad_swap_diagonal", src_comp=[0], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("reduce", src_comp=[0], dest_comp=0, indices=[REDUCTION_OP, CLUSTER_SIZE], flags=[CAN_ELIMINATE]) intrinsic("inclusive_scan", src_comp=[0], dest_comp=0, indices=[REDUCTION_OP], flags=[CAN_ELIMINATE]) intrinsic("exclusive_scan", src_comp=[0], dest_comp=0, indices=[REDUCTION_OP], flags=[CAN_ELIMINATE]) # AMD shader ballot operations intrinsic("quad_swizzle_amd", src_comp=[0], dest_comp=0, indices=[SWIZZLE_MASK], flags=[CAN_ELIMINATE]) intrinsic("masked_swizzle_amd", src_comp=[0], dest_comp=0, indices=[SWIZZLE_MASK], flags=[CAN_ELIMINATE]) intrinsic("write_invocation_amd", src_comp=[0, 0, 1], dest_comp=0, flags=[CAN_ELIMINATE]) intrinsic("mbcnt_amd", src_comp=[1], dest_comp=1, flags=[CAN_ELIMINATE]) # Basic Geometry Shader intrinsics. # # emit_vertex implements GLSL's EmitStreamVertex() built-in. It takes a single # index, which is the stream ID to write to. # # end_primitive implements GLSL's EndPrimitive() built-in. intrinsic("emit_vertex", indices=[STREAM_ID]) intrinsic("end_primitive", indices=[STREAM_ID]) # Geometry Shader intrinsics with a vertex count. # # Alternatively, drivers may implement these intrinsics, and use # nir_lower_gs_intrinsics() to convert from the basic intrinsics. # # These maintain a count of the number of vertices emitted, as an additional # unsigned integer source. intrinsic("emit_vertex_with_counter", src_comp=[1], indices=[STREAM_ID]) intrinsic("end_primitive_with_counter", src_comp=[1], indices=[STREAM_ID]) intrinsic("set_vertex_count", src_comp=[1]) # Atomic counters # # The *_var variants take an atomic_uint nir_variable, while the other, # lowered, variants take a constant buffer index and register offset. def atomic(name, flags=[]): intrinsic(name + "_deref", src_comp=[-1], dest_comp=1, flags=flags) intrinsic(name, src_comp=[1], dest_comp=1, indices=[BASE], flags=flags) def atomic2(name): intrinsic(name + "_deref", src_comp=[-1, 1], dest_comp=1) intrinsic(name, src_comp=[1, 1], dest_comp=1, indices=[BASE]) def atomic3(name): intrinsic(name + "_deref", src_comp=[-1, 1, 1], dest_comp=1) intrinsic(name, src_comp=[1, 1, 1], dest_comp=1, indices=[BASE]) atomic("atomic_counter_inc") atomic("atomic_counter_pre_dec") atomic("atomic_counter_post_dec") atomic("atomic_counter_read", flags=[CAN_ELIMINATE]) atomic2("atomic_counter_add") atomic2("atomic_counter_min") atomic2("atomic_counter_max") atomic2("atomic_counter_and") atomic2("atomic_counter_or") atomic2("atomic_counter_xor") atomic2("atomic_counter_exchange") atomic3("atomic_counter_comp_swap") # Image load, store and atomic intrinsics. # # All image intrinsics come in three versions. One which take an image target # passed as a deref chain as the first source, one which takes an index as the # first source, and one which takes a bindless handle as the first source. # In the first version, the image variable contains the memory and layout # qualifiers that influence the semantics of the intrinsic. In the second and # third, the image format and access qualifiers are provided as constant # indices. # # All image intrinsics take a four-coordinate vector and a sample index as # 2nd and 3rd sources, determining the location within the image that will be # accessed by the intrinsic. Components not applicable to the image target # in use are undefined. Image store takes an additional four-component # argument with the value to be written, and image atomic operations take # either one or two additional scalar arguments with the same meaning as in # the ARB_shader_image_load_store specification. def image(name, src_comp=[], **kwargs): intrinsic("image_deref_" + name, src_comp=[1] + src_comp, indices=[ACCESS], **kwargs) intrinsic("image_" + name, src_comp=[1] + src_comp, indices=[IMAGE_DIM, IMAGE_ARRAY, FORMAT, ACCESS], **kwargs) intrinsic("bindless_image_" + name, src_comp=[1] + src_comp, indices=[IMAGE_DIM, IMAGE_ARRAY, FORMAT, ACCESS], **kwargs) image("load", src_comp=[4, 1], dest_comp=0, flags=[CAN_ELIMINATE]) image("store", src_comp=[4, 1, 0]) image("atomic_add", src_comp=[4, 1, 1], dest_comp=1) image("atomic_imin", src_comp=[4, 1, 1], dest_comp=1) image("atomic_umin", src_comp=[4, 1, 1], dest_comp=1) image("atomic_imax", src_comp=[4, 1, 1], dest_comp=1) image("atomic_umax", src_comp=[4, 1, 1], dest_comp=1) image("atomic_and", src_comp=[4, 1, 1], dest_comp=1) image("atomic_or", src_comp=[4, 1, 1], dest_comp=1) image("atomic_xor", src_comp=[4, 1, 1], dest_comp=1) image("atomic_exchange", src_comp=[4, 1, 1], dest_comp=1) image("atomic_comp_swap", src_comp=[4, 1, 1, 1], dest_comp=1) image("atomic_fadd", src_comp=[1, 4, 1, 1], dest_comp=1) image("size", dest_comp=0, flags=[CAN_ELIMINATE, CAN_REORDER]) image("samples", dest_comp=1, flags=[CAN_ELIMINATE, CAN_REORDER]) image("atomic_inc_wrap", src_comp=[4, 1, 1], dest_comp=1) image("atomic_dec_wrap", src_comp=[4, 1, 1], dest_comp=1) # Intel-specific query for loading from the brw_image_param struct passed # into the shader as a uniform. The variable is a deref to the image # variable. The const index specifies which of the six parameters to load. intrinsic("image_deref_load_param_intel", src_comp=[1], dest_comp=0, indices=[BASE], flags=[CAN_ELIMINATE, CAN_REORDER]) image("load_raw_intel", src_comp=[1], dest_comp=0, flags=[CAN_ELIMINATE]) image("store_raw_intel", src_comp=[1, 0]) # Vulkan descriptor set intrinsics # # The Vulkan API uses a different binding model from GL. In the Vulkan # API, all external resources are represented by a tuple: # # (descriptor set, binding, array index) # # where the array index is the only thing allowed to be indirect. The # vulkan_surface_index intrinsic takes the descriptor set and binding as # its first two indices and the array index as its source. The third # index is a nir_variable_mode in case that's useful to the backend. # # The intended usage is that the shader will call vulkan_surface_index to # get an index and then pass that as the buffer index ubo/ssbo calls. # # The vulkan_resource_reindex intrinsic takes a resource index in src0 # (the result of a vulkan_resource_index or vulkan_resource_reindex) which # corresponds to the tuple (set, binding, index) and computes an index # corresponding to tuple (set, binding, idx + src1). intrinsic("vulkan_resource_index", src_comp=[1], dest_comp=0, indices=[DESC_SET, BINDING, DESC_TYPE], flags=[CAN_ELIMINATE, CAN_REORDER]) intrinsic("vulkan_resource_reindex", src_comp=[0, 1], dest_comp=0, indices=[DESC_TYPE], flags=[CAN_ELIMINATE, CAN_REORDER]) intrinsic("load_vulkan_descriptor", src_comp=[-1], dest_comp=0, indices=[DESC_TYPE], flags=[CAN_ELIMINATE, CAN_REORDER]) # variable atomic intrinsics # # All of these variable atomic memory operations read a value from memory, # compute a new value using one of the operations below, write the new value # to memory, and return the original value read. # # All operations take 2 sources except CompSwap that takes 3. These sources # represent: # # 0: A deref to the memory on which to perform the atomic # 1: The data parameter to the atomic function (i.e. the value to add # in shared_atomic_add, etc). # 2: For CompSwap only: the second data parameter. intrinsic("deref_atomic_add", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_imin", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_umin", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_imax", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_umax", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_and", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_or", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_xor", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_exchange", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_comp_swap", src_comp=[-1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_fadd", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_fmin", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_fmax", src_comp=[-1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("deref_atomic_fcomp_swap", src_comp=[-1, 1, 1], dest_comp=1, indices=[ACCESS]) # SSBO atomic intrinsics # # All of the SSBO atomic memory operations read a value from memory, # compute a new value using one of the operations below, write the new # value to memory, and return the original value read. # # All operations take 3 sources except CompSwap that takes 4. These # sources represent: # # 0: The SSBO buffer index. # 1: The offset into the SSBO buffer of the variable that the atomic # operation will operate on. # 2: The data parameter to the atomic function (i.e. the value to add # in ssbo_atomic_add, etc). # 3: For CompSwap only: the second data parameter. intrinsic("ssbo_atomic_add", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_imin", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_umin", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_imax", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_umax", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_and", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_or", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_xor", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_exchange", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_comp_swap", src_comp=[1, 1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_fadd", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_fmin", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_fmax", src_comp=[1, 1, 1], dest_comp=1, indices=[ACCESS]) intrinsic("ssbo_atomic_fcomp_swap", src_comp=[1, 1, 1, 1], dest_comp=1, indices=[ACCESS]) # CS shared variable atomic intrinsics # # All of the shared variable atomic memory operations read a value from # memory, compute a new value using one of the operations below, write the # new value to memory, and return the original value read. # # All operations take 2 sources except CompSwap that takes 3. These # sources represent: # # 0: The offset into the shared variable storage region that the atomic # operation will operate on. # 1: The data parameter to the atomic function (i.e. the value to add # in shared_atomic_add, etc). # 2: For CompSwap only: the second data parameter. intrinsic("shared_atomic_add", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_imin", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_umin", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_imax", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_umax", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_and", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_or", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_xor", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_exchange", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_comp_swap", src_comp=[1, 1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_fadd", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_fmin", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_fmax", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("shared_atomic_fcomp_swap", src_comp=[1, 1, 1], dest_comp=1, indices=[BASE]) # Global atomic intrinsics # # All of the shared variable atomic memory operations read a value from # memory, compute a new value using one of the operations below, write the # new value to memory, and return the original value read. # # All operations take 2 sources except CompSwap that takes 3. These # sources represent: # # 0: The memory address that the atomic operation will operate on. # 1: The data parameter to the atomic function (i.e. the value to add # in shared_atomic_add, etc). # 2: For CompSwap only: the second data parameter. intrinsic("global_atomic_add", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_imin", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_umin", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_imax", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_umax", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_and", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_or", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_xor", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_exchange", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_comp_swap", src_comp=[1, 1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_fadd", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_fmin", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_fmax", src_comp=[1, 1], dest_comp=1, indices=[BASE]) intrinsic("global_atomic_fcomp_swap", src_comp=[1, 1, 1], dest_comp=1, indices=[BASE]) def system_value(name, dest_comp, indices=[], bit_sizes=[32]): intrinsic("load_" + name, [], dest_comp, indices, flags=[CAN_ELIMINATE, CAN_REORDER], sysval=True, bit_sizes=bit_sizes) system_value("frag_coord", 4) system_value("point_coord", 2) system_value("front_face", 1, bit_sizes=[1, 32]) system_value("vertex_id", 1) system_value("vertex_id_zero_base", 1) system_value("first_vertex", 1) system_value("is_indexed_draw", 1) system_value("base_vertex", 1) system_value("instance_id", 1) system_value("base_instance", 1) system_value("draw_id", 1) system_value("sample_id", 1) # sample_id_no_per_sample is like sample_id but does not imply per- # sample shading. See the lower_helper_invocation option. system_value("sample_id_no_per_sample", 1) system_value("sample_pos", 2) system_value("sample_mask_in", 1) system_value("primitive_id", 1) system_value("invocation_id", 1) system_value("tess_coord", 3) system_value("tess_level_outer", 4) system_value("tess_level_inner", 2) system_value("tess_level_outer_default", 4) system_value("tess_level_inner_default", 2) system_value("patch_vertices_in", 1) system_value("local_invocation_id", 3) system_value("local_invocation_index", 1) system_value("work_group_id", 3) system_value("user_clip_plane", 4, indices=[UCP_ID]) system_value("num_work_groups", 3) system_value("helper_invocation", 1, bit_sizes=[1, 32]) system_value("alpha_ref_float", 1) system_value("layer_id", 1) system_value("view_index", 1) system_value("subgroup_size", 1) system_value("subgroup_invocation", 1) system_value("subgroup_eq_mask", 0, bit_sizes=[32, 64]) system_value("subgroup_ge_mask", 0, bit_sizes=[32, 64]) system_value("subgroup_gt_mask", 0, bit_sizes=[32, 64]) system_value("subgroup_le_mask", 0, bit_sizes=[32, 64]) system_value("subgroup_lt_mask", 0, bit_sizes=[32, 64]) system_value("num_subgroups", 1) system_value("subgroup_id", 1) system_value("local_group_size", 3) system_value("global_invocation_id", 3, bit_sizes=[32, 64]) system_value("global_invocation_index", 1, bit_sizes=[32, 64]) system_value("work_dim", 1) # Driver-specific viewport scale/offset parameters. # # VC4 and V3D need to emit a scaled version of the position in the vertex # shaders for binning, and having system values lets us move the math for that # into NIR. # # Panfrost needs to implement all coordinate transformation in the # vertex shader; system values allow us to share this routine in NIR. system_value("viewport_x_scale", 1) system_value("viewport_y_scale", 1) system_value("viewport_z_scale", 1) system_value("viewport_z_offset", 1) system_value("viewport_scale", 3) system_value("viewport_offset", 3) # Blend constant color values. Float values are clamped. Vectored versions are # provided as well for driver convenience system_value("blend_const_color_r_float", 1) system_value("blend_const_color_g_float", 1) system_value("blend_const_color_b_float", 1) system_value("blend_const_color_a_float", 1) system_value("blend_const_color_rgba", 4) system_value("blend_const_color_rgba8888_unorm", 1) system_value("blend_const_color_aaaa8888_unorm", 1) # System values for gl_Color, for radeonsi which interpolates these in the # shader prolog to handle two-sided color without recompiles and therefore # doesn't handle these in the main shader part like normal varyings. system_value("color0", 4) system_value("color1", 4) # System value for internal compute shaders in radeonsi. system_value("user_data_amd", 4) # Barycentric coordinate intrinsics. # # These set up the barycentric coordinates for a particular interpolation. # The first three are for the simple cases: pixel, centroid, or per-sample # (at gl_SampleID). The next two handle interpolating at a specified # sample location, or interpolating with a vec2 offset, # # The interp_mode index should be either the INTERP_MODE_SMOOTH or # INTERP_MODE_NOPERSPECTIVE enum values. # # The vec2 value produced by these intrinsics is intended for use as the # barycoord source of a load_interpolated_input intrinsic. def barycentric(name, src_comp=[]): intrinsic("load_barycentric_" + name, src_comp=src_comp, dest_comp=2, indices=[INTERP_MODE], flags=[CAN_ELIMINATE, CAN_REORDER]) # no sources. barycentric("pixel") barycentric("centroid") barycentric("sample") # src[] = { sample_id }. barycentric("at_sample", [1]) # src[] = { offset.xy }. barycentric("at_offset", [2]) # Load sample position: # # Takes a sample # and returns a sample position. Used for lowering # interpolateAtSample() to interpolateAtOffset() intrinsic("load_sample_pos_from_id", src_comp=[1], dest_comp=2, flags=[CAN_ELIMINATE, CAN_REORDER]) # Loads what I believe is the primitive size, for scaling ij to pixel size: intrinsic("load_size_ir3", dest_comp=1, flags=[CAN_ELIMINATE, CAN_REORDER]) # Fragment shader input interpolation delta intrinsic. # # For hw where fragment shader input interpolation is handled in shader, the # load_fs_input_interp deltas intrinsics can be used to load the input deltas # used for interpolation as follows: # # vec3 iid = load_fs_input_interp_deltas(varying_slot) # vec2 bary = load_barycentric_*(...) # float result = iid.x + iid.y * bary.y + iid.z * bary.x intrinsic("load_fs_input_interp_deltas", src_comp=[1], dest_comp=3, indices=[BASE, COMPONENT], flags=[CAN_ELIMINATE, CAN_REORDER]) # Load operations pull data from some piece of GPU memory. All load # operations operate in terms of offsets into some piece of theoretical # memory. Loads from externally visible memory (UBO and SSBO) simply take a # byte offset as a source. Loads from opaque memory (uniforms, inputs, etc.) # take a base+offset pair where the nir_intrinsic_base() gives the location # of the start of the variable being loaded and and the offset source is a # offset into that variable. # # Uniform load operations have a nir_intrinsic_range() index that specifies the # range (starting at base) of the data from which we are loading. If # range == 0, then the range is unknown. # # Some load operations such as UBO/SSBO load and per_vertex loads take an # additional source to specify which UBO/SSBO/vertex to load from. # # The exact address type depends on the lowering pass that generates the # load/store intrinsics. Typically, this is vec4 units for things such as # varying slots and float units for fragment shader inputs. UBO and SSBO # offsets are always in bytes. def load(name, num_srcs, indices=[], flags=[]): intrinsic("load_" + name, [1] * num_srcs, dest_comp=0, indices=indices, flags=flags) # src[] = { offset }. load("uniform", 1, [BASE, RANGE, TYPE], [CAN_ELIMINATE, CAN_REORDER]) # src[] = { buffer_index, offset }. load("ubo", 2, [ACCESS, ALIGN_MUL, ALIGN_OFFSET], flags=[CAN_ELIMINATE, CAN_REORDER]) # src[] = { offset }. load("input", 1, [BASE, COMPONENT, TYPE], [CAN_ELIMINATE, CAN_REORDER]) # src[] = { vertex, offset }. load("per_vertex_input", 2, [BASE, COMPONENT], [CAN_ELIMINATE, CAN_REORDER]) # src[] = { barycoord, offset }. intrinsic("load_interpolated_input", src_comp=[2, 1], dest_comp=0, indices=[BASE, COMPONENT], flags=[CAN_ELIMINATE, CAN_REORDER]) # src[] = { buffer_index, offset }. load("ssbo", 2, [ACCESS, ALIGN_MUL, ALIGN_OFFSET], [CAN_ELIMINATE]) # src[] = { offset }. load("output", 1, [BASE, COMPONENT], flags=[CAN_ELIMINATE]) # src[] = { vertex, offset }. load("per_vertex_output", 2, [BASE, COMPONENT], [CAN_ELIMINATE]) # src[] = { offset }. load("shared", 1, [BASE, ALIGN_MUL, ALIGN_OFFSET], [CAN_ELIMINATE]) # src[] = { offset }. load("push_constant", 1, [BASE, RANGE], [CAN_ELIMINATE, CAN_REORDER]) # src[] = { offset }. load("constant", 1, [BASE, RANGE], [CAN_ELIMINATE, CAN_REORDER]) # src[] = { address }. load("global", 1, [ACCESS, ALIGN_MUL, ALIGN_OFFSET], [CAN_ELIMINATE]) # src[] = { address }. load("kernel_input", 1, [BASE, RANGE, ALIGN_MUL, ALIGN_OFFSET], [CAN_ELIMINATE, CAN_REORDER]) # src[] = { offset }. load("scratch", 1, [ALIGN_MUL, ALIGN_OFFSET], [CAN_ELIMINATE]) # Stores work the same way as loads, except now the first source is the value # to store and the second (and possibly third) source specify where to store # the value. SSBO and shared memory stores also have a # nir_intrinsic_write_mask() def store(name, num_srcs, indices=[], flags=[]): intrinsic("store_" + name, [0] + ([1] * (num_srcs - 1)), indices=indices, flags=flags) # src[] = { value, offset }. store("output", 2, [BASE, WRMASK, COMPONENT, TYPE]) # src[] = { value, vertex, offset }. store("per_vertex_output", 3, [BASE, WRMASK, COMPONENT]) # src[] = { value, block_index, offset } store("ssbo", 3, [WRMASK, ACCESS, ALIGN_MUL, ALIGN_OFFSET]) # src[] = { value, offset }. store("shared", 2, [BASE, WRMASK, ALIGN_MUL, ALIGN_OFFSET]) # src[] = { value, address }. store("global", 2, [WRMASK, ACCESS, ALIGN_MUL, ALIGN_OFFSET]) # src[] = { value, offset }. store("scratch", 2, [ALIGN_MUL, ALIGN_OFFSET, WRMASK]) # IR3-specific version of most SSBO intrinsics. The only different # compare to the originals is that they add an extra source to hold # the dword-offset, which is needed by the backend code apart from # the byte-offset already provided by NIR in one of the sources. # # NIR lowering pass 'ir3_nir_lower_io_offset' will replace the # original SSBO intrinsics by these, placing the computed # dword-offset always in the last source. # # The float versions are not handled because those are not supported # by the backend. intrinsic("store_ssbo_ir3", src_comp=[0, 1, 1, 1], indices=[WRMASK, ACCESS, ALIGN_MUL, ALIGN_OFFSET]) intrinsic("load_ssbo_ir3", src_comp=[1, 1, 1], dest_comp=0, indices=[ACCESS, ALIGN_MUL, ALIGN_OFFSET], flags=[CAN_ELIMINATE]) intrinsic("ssbo_atomic_add_ir3", src_comp=[1, 1, 1, 1], dest_comp=1) intrinsic("ssbo_atomic_imin_ir3", src_comp=[1, 1, 1, 1], dest_comp=1) intrinsic("ssbo_atomic_umin_ir3", src_comp=[1, 1, 1, 1], dest_comp=1) intrinsic("ssbo_atomic_imax_ir3", src_comp=[1, 1, 1, 1], dest_comp=1) intrinsic("ssbo_atomic_umax_ir3", src_comp=[1, 1, 1, 1], dest_comp=1) intrinsic("ssbo_atomic_and_ir3", src_comp=[1, 1, 1, 1], dest_comp=1) intrinsic("ssbo_atomic_or_ir3", src_comp=[1, 1, 1, 1], dest_comp=1) intrinsic("ssbo_atomic_xor_ir3", src_comp=[1, 1, 1, 1], dest_comp=1) intrinsic("ssbo_atomic_exchange_ir3", src_comp=[1, 1, 1, 1], dest_comp=1) intrinsic("ssbo_atomic_comp_swap_ir3", src_comp=[1, 1, 1, 1, 1], dest_comp=1) # System values for freedreno geometry shaders. system_value("vs_primitive_stride_ir3", 1) system_value("vs_vertex_stride_ir3", 1) system_value("gs_header_ir3", 1) system_value("primitive_location_ir3", 1, indices=[DRIVER_LOCATION]) # System values for freedreno tessellation shaders. system_value("hs_patch_stride_ir3", 1) system_value("tess_factor_base_ir3", 2) system_value("tess_param_base_ir3", 2) system_value("tcs_header_ir3", 1) # IR3-specific intrinsics for tessellation control shaders. cond_end_ir3 end # the shader when src0 is false and is used to narrow down the TCS shader to # just thread 0 before writing out tessellation levels. intrinsic("cond_end_ir3", src_comp=[1]) # end_patch_ir3 is used just before thread 0 exist the TCS and presumably # signals the TE that the patch is complete and can be tessellated. intrinsic("end_patch_ir3") # IR3-specific load/store intrinsics. These access a buffer used to pass data # between geometry stages - perhaps it's explicit access to the vertex cache. # src[] = { value, offset }. store("shared_ir3", 2, [BASE, WRMASK, ALIGN_MUL, ALIGN_OFFSET]) # src[] = { offset }. load("shared_ir3", 1, [BASE, ALIGN_MUL, ALIGN_OFFSET], [CAN_ELIMINATE]) # IR3-specific load/store global intrinsics. They take a 64-bit base address # and a 32-bit offset. The hardware will add the base and the offset, which # saves us from doing 64-bit math on the base address. # src[] = { value, address(vec2 of hi+lo uint32_t), offset }. # const_index[] = { write_mask, align_mul, align_offset } intrinsic("store_global_ir3", [0, 2, 1], indices=[WRMASK, ACCESS, ALIGN_MUL, ALIGN_OFFSET]) # src[] = { address(vec2 of hi+lo uint32_t), offset }. # const_index[] = { access, align_mul, align_offset } intrinsic("load_global_ir3", [2, 1], dest_comp=0, indices=[ACCESS, ALIGN_MUL, ALIGN_OFFSET], flags=[CAN_ELIMINATE]) # Intrinsics used by the Midgard/Bifrost blend pipeline. These are defined # within a blend shader to read/write the raw value from the tile buffer, # without applying any format conversion in the process. If the shader needs # usable pixel values, it must apply format conversions itself. # # These definitions are generic, but they are explicitly vendored to prevent # other drivers from using them, as their semantics is defined in terms of the # Midgard/Bifrost hardware tile buffer and may not line up with anything sane. # One notable divergence is sRGB, which is asymmetric: raw_input_pan requires # an sRGB->linear conversion, but linear values should be written to # raw_output_pan and the hardware handles linear->sRGB. # # We also have format-specific Midgard intrinsics. There are rather # here-be-dragons. load_output_u8_as_fp16_pan does the equivalent of # load_raw_out_pan on an RGBA8 UNORM framebuffer followed by u2u16 -> fp16 -> # division by 255. # src[] = { value } store("raw_output_pan", 1, []) load("raw_output_pan", 0, [], [CAN_ELIMINATE, CAN_REORDER]) load("output_u8_as_fp16_pan", 0, [], [CAN_ELIMINATE, CAN_REORDER]) # V3D-specific instrinc for tile buffer color reads. # # The hardware requires that we read the samples and components of a pixel # in order, so we cannot eliminate or remove any loads in a sequence. # # src[] = { render_target } # BASE = sample index load("tlb_color_v3d", 1, [BASE, COMPONENT], []) # V3D-specific instrinc for per-sample tile buffer color writes. # # The driver backend needs to identify per-sample color writes and emit # specific code for them. # # src[] = { value, render_target } # BASE = sample index store("tlb_sample_color_v3d", 2, [BASE, COMPONENT, TYPE], [])