From 0881e90c09965818b02e359474a6f7446b41d647 Mon Sep 17 00:00:00 2001 From: Ian Romanick Date: Thu, 17 Jan 2019 17:34:47 -0800 Subject: nir: Split ALU instructions in loops that read phis A single shader in Unigine Superposition is affected by this change. A single iadd is moved to the end of a loop. This iadd is involved in a complex set of logic to terminate the loop, and an extra mov instruction is inserted. This shader really needs the optimization suggested by bugzilla #94747, and I expect that to make this tiny regression go away. All Gen7+ platforms had similar results. (Skylake shown) total instructions in shared programs: 15047543 -> 15047545 (<.01%) instructions in affected programs: 565 -> 567 (0.35%) helped: 0 HURT: 2 total cycles in shared programs: 369977253 -> 369978253 (<.01%) cycles in affected programs: 127910 -> 128910 (0.78%) helped: 0 HURT: 2 v2: Skip nir_op_vec{2,3,4} and nir_op_[fi]mov instructions to avoid infinite optimization loops. Remove the original ALU instruciton after all of its readers are modified to read the new ALU instruction. v3: Extend to the more general case. The if the prev-block value from the phi is not undef, this means the ALU instruction has to be duplicated in both the prev-block and the continue-block. Fixes: 8fb8ebfbb05 ("intel/compiler: More peephole select") Reviewed-by: Timothy Arceri --- src/compiler/nir/nir_opt_if.c | 294 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 294 insertions(+) (limited to 'src/compiler') diff --git a/src/compiler/nir/nir_opt_if.c b/src/compiler/nir/nir_opt_if.c index 0e7cc56395e..be0a2d55d78 100644 --- a/src/compiler/nir/nir_opt_if.c +++ b/src/compiler/nir/nir_opt_if.c @@ -27,6 +27,10 @@ #include "nir_control_flow.h" #include "nir_loop_analyze.h" +static nir_ssa_def *clone_alu_and_replace_src_defs(nir_builder *b, + const nir_alu_instr *alu, + nir_ssa_def **src_defs); + /** * Gets the single block that jumps back to the loop header. Already assumes * there is exactly one such block. @@ -249,6 +253,295 @@ opt_peel_loop_initial_if(nir_loop *loop) return true; } +static bool +alu_instr_is_comparison(const nir_alu_instr *alu) +{ + switch (alu->op) { + case nir_op_flt32: + case nir_op_fge32: + case nir_op_feq32: + case nir_op_fne32: + case nir_op_ilt32: + case nir_op_ult32: + case nir_op_ige32: + case nir_op_uge32: + case nir_op_ieq32: + case nir_op_ine32: + return true; + default: + return nir_alu_instr_is_comparison(alu); + } +} + +static bool +alu_instr_is_type_conversion(const nir_alu_instr *alu) +{ + return nir_op_infos[alu->op].num_inputs == 1 && + nir_alu_type_get_base_type(nir_op_infos[alu->op].output_type) != + nir_alu_type_get_base_type(nir_op_infos[alu->op].input_types[0]); +} + +/** + * Splits ALU instructions that have a source that is a phi node + * + * ALU instructions in the header block of a loop that meet the following + * criteria can be split. + * + * - The loop has no continue instructions other than the "natural" continue + * at the bottom of the loop. + * + * - At least one source of the instruction is a phi node from the header block. + * + * and either this rule + * + * - The phi node selects undef from the block before the loop and a value + * from the continue block of the loop. + * + * or these two rules + * + * - The phi node selects a constant from the block before the loop. + * + * - The non-phi source of the ALU instruction comes from a block that + * dominates the block before the loop. The most common failure mode for + * this check is sources that are generated in the loop header block. + * + * The split process moves the original ALU instruction to the bottom of the + * loop. The phi node source is replaced with the value from the phi node + * selected from the continue block (i.e., the non-undef value). A new phi + * node is added to the header block that selects either undef from the block + * before the loop or the result of the (moved) ALU instruction. + * + * The splitting transforms a loop like: + * + * vec1 32 ssa_7 = undefined + * vec1 32 ssa_8 = load_const (0x00000001) + * vec1 32 ssa_10 = load_const (0x00000000) + * // succs: block_1 + * loop { + * block block_1: + * // preds: block_0 block_4 + * vec1 32 ssa_11 = phi block_0: ssa_7, block_4: ssa_15 + * vec1 32 ssa_12 = phi block_0: ssa_1, block_4: ssa_15 + * vec1 32 ssa_13 = phi block_0: ssa_10, block_4: ssa_16 + * vec1 32 ssa_14 = iadd ssa_11, ssa_8 + * vec1 32 ssa_15 = b32csel ssa_13, ssa_14, ssa_12 + * ... + * // succs: block_1 + * } + * + * into: + * + * vec1 32 ssa_7 = undefined + * vec1 32 ssa_8 = load_const (0x00000001) + * vec1 32 ssa_10 = load_const (0x00000000) + * // succs: block_1 + * loop { + * block block_1: + * // preds: block_0 block_4 + * vec1 32 ssa_11 = phi block_0: ssa_7, block_4: ssa_15 + * vec1 32 ssa_12 = phi block_0: ssa_1, block_4: ssa_15 + * vec1 32 ssa_13 = phi block_0: ssa_10, block_4: ssa_16 + * vec1 32 ssa_21 = phi block_0: sss_7, block_4: ssa_20 + * vec1 32 ssa_15 = b32csel ssa_13, ssa_21, ssa_12 + * ... + * vec1 32 ssa_20 = iadd ssa_15, ssa_8 + * // succs: block_1 + * } + * + * If the phi does not select an undef, the instruction is duplicated in the + * loop continue block (as in the undef case) and in the previous block. When + * the ALU instruction is duplicated in the previous block, the correct source + * must be selected from the phi node. + */ +static bool +opt_split_alu_of_phi(nir_builder *b, nir_loop *loop) +{ + bool progress = false; + nir_block *header_block = nir_loop_first_block(loop); + nir_block *const prev_block = + nir_cf_node_as_block(nir_cf_node_prev(&loop->cf_node)); + + /* It would be insane if this were not true */ + assert(_mesa_set_search(header_block->predecessors, prev_block)); + + /* The loop must have exactly one continue block which could be a block + * ending in a continue instruction or the "natural" continue from the + * last block in the loop back to the top. + */ + if (header_block->predecessors->entries != 2) + return false; + + nir_foreach_instr_safe(instr, header_block) { + if (instr->type != nir_instr_type_alu) + continue; + + nir_alu_instr *const alu = nir_instr_as_alu(instr); + + /* Most ALU ops produce an undefined result if any source is undef. + * However, operations like bcsel only produce undefined results of the + * first operand is undef. Even in the undefined case, the result + * should be one of the other two operands, so the result of the bcsel + * should never be replaced with undef. + * + * nir_op_vec{2,3,4}, nir_op_imov, and nir_op_fmov are excluded because + * they can easily lead to infinite optimization loops. + */ + if (alu->op == nir_op_bcsel || + alu->op == nir_op_b32csel || + alu->op == nir_op_fcsel || + alu->op == nir_op_vec2 || + alu->op == nir_op_vec3 || + alu->op == nir_op_vec4 || + alu->op == nir_op_imov || + alu->op == nir_op_fmov || + alu_instr_is_comparison(alu) || + alu_instr_is_type_conversion(alu)) + continue; + + bool has_phi_src_from_prev_block = false; + bool all_non_phi_exist_in_prev_block = true; + bool is_prev_result_undef = true; + bool is_prev_result_const = true; + nir_ssa_def *prev_srcs[8]; // FINISHME: Array size? + nir_ssa_def *continue_srcs[8]; // FINISHME: Array size? + + for (unsigned i = 0; i < nir_op_infos[alu->op].num_inputs; i++) { + nir_instr *const src_instr = alu->src[i].src.ssa->parent_instr; + + /* If the source is a phi in the loop header block, then the + * prev_srcs and continue_srcs will come from the different sources + * of the phi. + */ + if (src_instr->type == nir_instr_type_phi && + src_instr->block == header_block) { + nir_phi_instr *const phi = nir_instr_as_phi(src_instr); + + /* Only strictly need to NULL out the pointers when the assertions + * (below) are compiled in. Debugging a NULL pointer deref in the + * wild is easier than debugging a random pointer deref, so set + * NULL unconditionally just to be safe. + */ + prev_srcs[i] = NULL; + continue_srcs[i] = NULL; + + nir_foreach_phi_src(src_of_phi, phi) { + if (src_of_phi->pred == prev_block) { + if (src_of_phi->src.ssa->parent_instr->type != + nir_instr_type_ssa_undef) { + is_prev_result_undef = false; + } + + if (src_of_phi->src.ssa->parent_instr->type != + nir_instr_type_load_const) { + is_prev_result_const = false; + } + + prev_srcs[i] = src_of_phi->src.ssa; + has_phi_src_from_prev_block = true; + } else + continue_srcs[i] = src_of_phi->src.ssa; + } + + assert(prev_srcs[i] != NULL); + assert(continue_srcs[i] != NULL); + } else { + /* If the source is not a phi (or a phi in a block other than the + * loop header), then the value must exist in prev_block. + */ + if (!nir_block_dominates(src_instr->block, prev_block)) { + all_non_phi_exist_in_prev_block = false; + break; + } + + prev_srcs[i] = alu->src[i].src.ssa; + continue_srcs[i] = alu->src[i].src.ssa; + } + } + + if (has_phi_src_from_prev_block && all_non_phi_exist_in_prev_block && + (is_prev_result_undef || is_prev_result_const)) { + nir_block *const continue_block = find_continue_block(loop); + nir_ssa_def *prev_value; + + if (!is_prev_result_undef) { + b->cursor = nir_after_block(prev_block); + prev_value = clone_alu_and_replace_src_defs(b, alu, prev_srcs); + } else { + /* Since the undef used as the source of the original ALU + * instruction may have different number of components or + * bit size than the result of that instruction, a new + * undef must be created. + */ + nir_ssa_undef_instr *undef = + nir_ssa_undef_instr_create(b->shader, + alu->dest.dest.ssa.num_components, + alu->dest.dest.ssa.bit_size); + + nir_instr_insert_after_block(prev_block, &undef->instr); + + prev_value = &undef->def; + } + + /* Make a copy of the original ALU instruction. Replace the sources + * of the new instruction that read a phi with an undef source from + * prev_block with the non-undef source of that phi. + * + * Insert the new instruction at the end of the continue block. + */ + b->cursor = nir_after_block(continue_block); + + nir_ssa_def *const alu_copy = + clone_alu_and_replace_src_defs(b, alu, continue_srcs); + + /* Make a new phi node that selects a value from prev_block and the + * result of the new instruction from continue_block. + */ + nir_phi_instr *const phi = nir_phi_instr_create(b->shader); + nir_phi_src *phi_src; + + phi_src = ralloc(phi, nir_phi_src); + phi_src->pred = prev_block; + phi_src->src = nir_src_for_ssa(prev_value); + exec_list_push_tail(&phi->srcs, &phi_src->node); + + phi_src = ralloc(phi, nir_phi_src); + phi_src->pred = continue_block; + phi_src->src = nir_src_for_ssa(alu_copy); + exec_list_push_tail(&phi->srcs, &phi_src->node); + + nir_ssa_dest_init(&phi->instr, &phi->dest, + alu_copy->num_components, alu_copy->bit_size, NULL); + + b->cursor = nir_after_phis(header_block); + nir_builder_instr_insert(b, &phi->instr); + + /* Modify all readers of the original ALU instruction to read the + * result of the phi. + */ + nir_foreach_use_safe(use_src, &alu->dest.dest.ssa) { + nir_instr_rewrite_src(use_src->parent_instr, + use_src, + nir_src_for_ssa(&phi->dest.ssa)); + } + + nir_foreach_if_use_safe(use_src, &alu->dest.dest.ssa) { + nir_if_rewrite_condition(use_src->parent_if, + nir_src_for_ssa(&phi->dest.ssa)); + } + + /* Since the original ALU instruction no longer has any readers, just + * remove it. + */ + nir_instr_remove_v(&alu->instr); + ralloc_free(alu); + + progress = true; + } + } + + return progress; +} + static bool is_block_empty(nir_block *block) { @@ -853,6 +1146,7 @@ opt_if_safe_cf_list(nir_builder *b, struct exec_list *cf_list) case nir_cf_node_loop: { nir_loop *loop = nir_cf_node_as_loop(cf_node); progress |= opt_if_safe_cf_list(b, &loop->body); + progress |= opt_split_alu_of_phi(b, loop); break; } -- cgit v1.2.3