From 253066d716e3039522eeb7b072811cccd89b4a82 Mon Sep 17 00:00:00 2001 From: José Fonseca Date: Mon, 26 May 2008 23:29:38 +0900 Subject: Revert DOS line endings. --- src/gallium/drivers/i915simple/i915_context.h | 682 ++++++------ src/gallium/drivers/i965simple/brw_context.h | 1368 ++++++++++++------------- src/gallium/drivers/i965simple/brw_state.c | 938 ++++++++--------- 3 files changed, 1494 insertions(+), 1494 deletions(-) diff --git a/src/gallium/drivers/i915simple/i915_context.h b/src/gallium/drivers/i915simple/i915_context.h index 38e6a348845..53fc5ed0795 100644 --- a/src/gallium/drivers/i915simple/i915_context.h +++ b/src/gallium/drivers/i915simple/i915_context.h @@ -1,341 +1,341 @@ - /************************************************************************** - * - * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sub license, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. - * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR - * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - **************************************************************************/ - -#ifndef I915_CONTEXT_H -#define I915_CONTEXT_H - - -#include "pipe/p_context.h" -#include "pipe/p_defines.h" -#include "pipe/p_state.h" - -#include "draw/draw_vertex.h" - -#include "tgsi/util/tgsi_scan.h" - - -#define I915_TEX_UNITS 8 - -#define I915_DYNAMIC_MODES4 0 -#define I915_DYNAMIC_DEPTHSCALE_0 1 /* just the header */ -#define I915_DYNAMIC_DEPTHSCALE_1 2 -#define I915_DYNAMIC_IAB 3 -#define I915_DYNAMIC_BC_0 4 /* just the header */ -#define I915_DYNAMIC_BC_1 5 -#define I915_DYNAMIC_BFO_0 6 -#define I915_DYNAMIC_BFO_1 7 -#define I915_DYNAMIC_STP_0 8 -#define I915_DYNAMIC_STP_1 9 -#define I915_DYNAMIC_SC_ENA_0 10 -#define I915_DYNAMIC_SC_RECT_0 11 -#define I915_DYNAMIC_SC_RECT_1 12 -#define I915_DYNAMIC_SC_RECT_2 13 -#define I915_MAX_DYNAMIC 14 - - -#define I915_IMMEDIATE_S0 0 -#define I915_IMMEDIATE_S1 1 -#define I915_IMMEDIATE_S2 2 -#define I915_IMMEDIATE_S3 3 -#define I915_IMMEDIATE_S4 4 -#define I915_IMMEDIATE_S5 5 -#define I915_IMMEDIATE_S6 6 -#define I915_IMMEDIATE_S7 7 -#define I915_MAX_IMMEDIATE 8 - -/* These must mach the order of LI0_STATE_* bits, as they will be used - * to generate hardware packets: - */ -#define I915_CACHE_STATIC 0 -#define I915_CACHE_DYNAMIC 1 /* handled specially */ -#define I915_CACHE_SAMPLER 2 -#define I915_CACHE_MAP 3 -#define I915_CACHE_PROGRAM 4 -#define I915_CACHE_CONSTANTS 5 -#define I915_MAX_CACHE 6 - -#define I915_MAX_CONSTANT 32 - - -/** See constant_flags[] below */ -#define I915_CONSTFLAG_USER 0x1f - - -/** - * Subclass of pipe_shader_state - */ -struct i915_fragment_shader -{ - struct pipe_shader_state state; - - struct tgsi_shader_info info; - - uint *program; - uint program_len; - - /** - * constants introduced during translation. - * These are placed at the end of the constant buffer and grow toward - * the beginning (eg: slot 31, 30 29, ...) - * User-provided constants start at 0. - * This allows both types of constants to co-exist (until there's too many) - * and doesn't require regenerating/changing the fragment program to - * shuffle constants around. - */ - uint num_constants; - float constants[I915_MAX_CONSTANT][4]; - - /** - * Status of each constant - * if I915_CONSTFLAG_PARAM, the value must be taken from the corresponding - * slot of the user's constant buffer. (set by pipe->set_constant_buffer()) - * Else, the bitmask indicates which components are occupied by immediates. - */ - ubyte constant_flags[I915_MAX_CONSTANT]; -}; - - -struct i915_cache_context; - -/* Use to calculate differences between state emitted to hardware and - * current driver-calculated state. - */ -struct i915_state -{ - unsigned immediate[I915_MAX_IMMEDIATE]; - unsigned dynamic[I915_MAX_DYNAMIC]; - - float constants[PIPE_SHADER_TYPES][I915_MAX_CONSTANT][4]; - /** number of constants passed in through a constant buffer */ - uint num_user_constants[PIPE_SHADER_TYPES]; - - /* texture sampler state */ - unsigned sampler[I915_TEX_UNITS][3]; - unsigned sampler_enable_flags; - unsigned sampler_enable_nr; - - /* texture image buffers */ - unsigned texbuffer[I915_TEX_UNITS][2]; - - /** Describes the current hardware vertex layout */ - struct vertex_info vertex_info; - - unsigned id; /* track lost context events */ -}; - -struct i915_blend_state { - unsigned iab; - unsigned modes4; - unsigned LIS5; - unsigned LIS6; -}; - -struct i915_depth_stencil_state { - unsigned stencil_modes4; - unsigned bfo[2]; - unsigned stencil_LIS5; - unsigned depth_LIS6; -}; - -struct i915_rasterizer_state { - int light_twoside : 1; - unsigned st; - enum interp_mode color_interp; - - unsigned LIS4; - unsigned LIS7; - unsigned sc[1]; - - const struct pipe_rasterizer_state *templ; - - union { float f; unsigned u; } ds[2]; -}; - -struct i915_sampler_state { - unsigned state[3]; - const struct pipe_sampler_state *templ; -}; - - -struct i915_texture { - struct pipe_texture base; - - /* Derived from the above: - */ - unsigned pitch; - unsigned depth_pitch; /* per-image on i945? */ - unsigned total_height; - - unsigned nr_images[PIPE_MAX_TEXTURE_LEVELS]; - - /* Explicitly store the offset of each image for each cube face or - * depth value. Pretty much have to accept that hardware formats - * are going to be so diverse that there is no unified way to - * compute the offsets of depth/cube images within a mipmap level, - * so have to store them as a lookup table: - */ - unsigned *image_offset[PIPE_MAX_TEXTURE_LEVELS]; /**< array [depth] of offsets */ - - /* Includes image offset tables: - */ - unsigned level_offset[PIPE_MAX_TEXTURE_LEVELS]; - - /* The data is held here: - */ - struct pipe_buffer *buffer; -}; - -struct i915_context -{ - struct pipe_context pipe; - struct i915_winsys *winsys; - struct draw_context *draw; - - /* The most recent drawing state as set by the driver: - */ - const struct i915_blend_state *blend; - const struct i915_sampler_state *sampler[PIPE_MAX_SAMPLERS]; - const struct i915_depth_stencil_state *depth_stencil; - const struct i915_rasterizer_state *rasterizer; - - struct i915_fragment_shader *fs; - - struct pipe_blend_color blend_color; - struct pipe_clip_state clip; - struct pipe_constant_buffer constants[PIPE_SHADER_TYPES]; - struct pipe_framebuffer_state framebuffer; - struct pipe_poly_stipple poly_stipple; - struct pipe_scissor_state scissor; - struct i915_texture *texture[PIPE_MAX_SAMPLERS]; - struct pipe_viewport_state viewport; - struct pipe_vertex_buffer vertex_buffer[PIPE_MAX_ATTRIBS]; - - unsigned dirty; - - unsigned num_samplers; - unsigned num_textures; - unsigned num_vertex_elements; - unsigned num_vertex_buffers; - - unsigned *batch_start; - - /** Vertex buffer */ - struct pipe_buffer *vbo; - - struct i915_state current; - unsigned hardware_dirty; - - unsigned debug; -}; - -/* A flag for each state_tracker state object: - */ -#define I915_NEW_VIEWPORT 0x1 -#define I915_NEW_RASTERIZER 0x2 -#define I915_NEW_FS 0x4 -#define I915_NEW_BLEND 0x8 -#define I915_NEW_CLIP 0x10 -#define I915_NEW_SCISSOR 0x20 -#define I915_NEW_STIPPLE 0x40 -#define I915_NEW_FRAMEBUFFER 0x80 -#define I915_NEW_ALPHA_TEST 0x100 -#define I915_NEW_DEPTH_STENCIL 0x200 -#define I915_NEW_SAMPLER 0x400 -#define I915_NEW_TEXTURE 0x800 -#define I915_NEW_CONSTANTS 0x1000 -#define I915_NEW_VBO 0x2000 -#define I915_NEW_VS 0x4000 - - -/* Driver's internally generated state flags: - */ -#define I915_NEW_VERTEX_FORMAT 0x10000 - - -/* Dirty flags for hardware emit - */ -#define I915_HW_STATIC (1<set_constant_buffer()) + * Else, the bitmask indicates which components are occupied by immediates. + */ + ubyte constant_flags[I915_MAX_CONSTANT]; +}; + + +struct i915_cache_context; + +/* Use to calculate differences between state emitted to hardware and + * current driver-calculated state. + */ +struct i915_state +{ + unsigned immediate[I915_MAX_IMMEDIATE]; + unsigned dynamic[I915_MAX_DYNAMIC]; + + float constants[PIPE_SHADER_TYPES][I915_MAX_CONSTANT][4]; + /** number of constants passed in through a constant buffer */ + uint num_user_constants[PIPE_SHADER_TYPES]; + + /* texture sampler state */ + unsigned sampler[I915_TEX_UNITS][3]; + unsigned sampler_enable_flags; + unsigned sampler_enable_nr; + + /* texture image buffers */ + unsigned texbuffer[I915_TEX_UNITS][2]; + + /** Describes the current hardware vertex layout */ + struct vertex_info vertex_info; + + unsigned id; /* track lost context events */ +}; + +struct i915_blend_state { + unsigned iab; + unsigned modes4; + unsigned LIS5; + unsigned LIS6; +}; + +struct i915_depth_stencil_state { + unsigned stencil_modes4; + unsigned bfo[2]; + unsigned stencil_LIS5; + unsigned depth_LIS6; +}; + +struct i915_rasterizer_state { + int light_twoside : 1; + unsigned st; + enum interp_mode color_interp; + + unsigned LIS4; + unsigned LIS7; + unsigned sc[1]; + + const struct pipe_rasterizer_state *templ; + + union { float f; unsigned u; } ds[2]; +}; + +struct i915_sampler_state { + unsigned state[3]; + const struct pipe_sampler_state *templ; +}; + + +struct i915_texture { + struct pipe_texture base; + + /* Derived from the above: + */ + unsigned pitch; + unsigned depth_pitch; /* per-image on i945? */ + unsigned total_height; + + unsigned nr_images[PIPE_MAX_TEXTURE_LEVELS]; + + /* Explicitly store the offset of each image for each cube face or + * depth value. Pretty much have to accept that hardware formats + * are going to be so diverse that there is no unified way to + * compute the offsets of depth/cube images within a mipmap level, + * so have to store them as a lookup table: + */ + unsigned *image_offset[PIPE_MAX_TEXTURE_LEVELS]; /**< array [depth] of offsets */ + + /* Includes image offset tables: + */ + unsigned level_offset[PIPE_MAX_TEXTURE_LEVELS]; + + /* The data is held here: + */ + struct pipe_buffer *buffer; +}; + +struct i915_context +{ + struct pipe_context pipe; + struct i915_winsys *winsys; + struct draw_context *draw; + + /* The most recent drawing state as set by the driver: + */ + const struct i915_blend_state *blend; + const struct i915_sampler_state *sampler[PIPE_MAX_SAMPLERS]; + const struct i915_depth_stencil_state *depth_stencil; + const struct i915_rasterizer_state *rasterizer; + + struct i915_fragment_shader *fs; + + struct pipe_blend_color blend_color; + struct pipe_clip_state clip; + struct pipe_constant_buffer constants[PIPE_SHADER_TYPES]; + struct pipe_framebuffer_state framebuffer; + struct pipe_poly_stipple poly_stipple; + struct pipe_scissor_state scissor; + struct i915_texture *texture[PIPE_MAX_SAMPLERS]; + struct pipe_viewport_state viewport; + struct pipe_vertex_buffer vertex_buffer[PIPE_MAX_ATTRIBS]; + + unsigned dirty; + + unsigned num_samplers; + unsigned num_textures; + unsigned num_vertex_elements; + unsigned num_vertex_buffers; + + unsigned *batch_start; + + /** Vertex buffer */ + struct pipe_buffer *vbo; + + struct i915_state current; + unsigned hardware_dirty; + + unsigned debug; +}; + +/* A flag for each state_tracker state object: + */ +#define I915_NEW_VIEWPORT 0x1 +#define I915_NEW_RASTERIZER 0x2 +#define I915_NEW_FS 0x4 +#define I915_NEW_BLEND 0x8 +#define I915_NEW_CLIP 0x10 +#define I915_NEW_SCISSOR 0x20 +#define I915_NEW_STIPPLE 0x40 +#define I915_NEW_FRAMEBUFFER 0x80 +#define I915_NEW_ALPHA_TEST 0x100 +#define I915_NEW_DEPTH_STENCIL 0x200 +#define I915_NEW_SAMPLER 0x400 +#define I915_NEW_TEXTURE 0x800 +#define I915_NEW_CONSTANTS 0x1000 +#define I915_NEW_VBO 0x2000 +#define I915_NEW_VS 0x4000 + + +/* Driver's internally generated state flags: + */ +#define I915_NEW_VERTEX_FORMAT 0x10000 + + +/* Dirty flags for hardware emit + */ +#define I915_HW_STATIC (1< - */ - - -#ifndef BRWCONTEXT_INC -#define BRWCONTEXT_INC - - -#include "pipe/p_context.h" -#include "pipe/p_defines.h" -#include "pipe/p_state.h" - -#include "tgsi/util/tgsi_scan.h" - -#include "brw_structs.h" -#include "brw_winsys.h" - - -/* Glossary: - * - * URB - uniform resource buffer. A mid-sized buffer which is - * partitioned between the fixed function units and used for passing - * values (vertices, primitives, constants) between them. - * - * CURBE - constant URB entry. An urb region (entry) used to hold - * constant values which the fixed function units can be instructed to - * preload into the GRF when spawining a thread. - * - * VUE - vertex URB entry. An urb entry holding a vertex and usually - * a vertex header. The header contains control information and - * things like primitive type, Begin/end flags and clip codes. - * - * PUE - primitive URB entry. An urb entry produced by the setup (SF) - * unit holding rasterization and interpolation parameters. - * - * GRF - general register file. One of several register files - * addressable by programmed threads. The inputs (r0, payload, curbe, - * urb) of the thread are preloaded to this area before the thread is - * spawned. The registers are individually 8 dwords wide and suitable - * for general usage. Registers holding thread input values are not - * special and may be overwritten. - * - * MRF - message register file. Threads communicate (and terminate) - * by sending messages. Message parameters are placed in contigous - * MRF registers. All program output is via these messages. URB - * entries are populated by sending a message to the shared URB - * function containing the new data, together with a control word, - * often an unmodified copy of R0. - * - * R0 - GRF register 0. Typically holds control information used when - * sending messages to other threads. - * - * EU or GEN4 EU: The name of the programmable subsystem of the - * i965 hardware. Threads are executed by the EU, the registers - * described above are part of the EU architecture. - * - * Fixed function units: - * - * CS - Command streamer. Notional first unit, little software - * interaction. Holds the URB entries used for constant data, ie the - * CURBEs. - * - * VF/VS - Vertex Fetch / Vertex Shader. The fixed function part of - * this unit is responsible for pulling vertices out of vertex buffers - * in vram and injecting them into the processing pipe as VUEs. If - * enabled, it first passes them to a VS thread which is a good place - * for the driver to implement any active vertex shader. - * - * GS - Geometry Shader. This corresponds to a new DX10 concept. If - * enabled, incoming strips etc are passed to GS threads in individual - * line/triangle/point units. The GS thread may perform arbitary - * computation and emit whatever primtives with whatever vertices it - * chooses. This makes GS an excellent place to implement GL's - * unfilled polygon modes, though of course it is capable of much - * more. Additionally, GS is used to translate away primitives not - * handled by latter units, including Quads and Lineloops. - * - * CS - Clipper. Mesa's clipping algorithms are imported to run on - * this unit. The fixed function part performs cliptesting against - * the 6 fixed clipplanes and makes descisions on whether or not the - * incoming primitive needs to be passed to a thread for clipping. - * User clip planes are handled via cooperation with the VS thread. - * - * SF - Strips Fans or Setup: Triangles are prepared for - * rasterization. Interpolation coefficients are calculated. - * Flatshading and two-side lighting usually performed here. - * - * WM - Windower. Interpolation of vertex attributes performed here. - * Fragment shader implemented here. SIMD aspects of EU taken full - * advantage of, as pixels are processed in blocks of 16. - * - * CC - Color Calculator. No EU threads associated with this unit. - * Handles blending and (presumably) depth and stencil testing. - */ - -#define BRW_MAX_CURBE (32*16) - -struct brw_context; -struct brw_winsys; - - -/* Raised when we receive new state across the pipe interface: - */ -#define BRW_NEW_VIEWPORT 0x1 -#define BRW_NEW_RASTERIZER 0x2 -#define BRW_NEW_FS 0x4 -#define BRW_NEW_BLEND 0x8 -#define BRW_NEW_CLIP 0x10 -#define BRW_NEW_SCISSOR 0x20 -#define BRW_NEW_STIPPLE 0x40 -#define BRW_NEW_FRAMEBUFFER 0x80 -#define BRW_NEW_ALPHA_TEST 0x100 -#define BRW_NEW_DEPTH_STENCIL 0x200 -#define BRW_NEW_SAMPLER 0x400 -#define BRW_NEW_TEXTURE 0x800 -#define BRW_NEW_CONSTANTS 0x1000 -#define BRW_NEW_VBO 0x2000 -#define BRW_NEW_VS 0x4000 - -/* Raised for other internal events: - */ -#define BRW_NEW_URB_FENCE 0x10000 -#define BRW_NEW_PSP 0x20000 -#define BRW_NEW_CURBE_OFFSETS 0x40000 -#define BRW_NEW_REDUCED_PRIMITIVE 0x80000 -#define BRW_NEW_PRIMITIVE 0x100000 -#define BRW_NEW_SCENE 0x200000 -#define BRW_NEW_SF_LINKAGE 0x400000 - -extern int BRW_DEBUG; - -#define DEBUG_TEXTURE 0x1 -#define DEBUG_STATE 0x2 -#define DEBUG_IOCTL 0x4 -#define DEBUG_PRIMS 0x8 -#define DEBUG_VERTS 0x10 -#define DEBUG_FALLBACKS 0x20 -#define DEBUG_VERBOSE 0x40 -#define DEBUG_DRI 0x80 -#define DEBUG_DMA 0x100 -#define DEBUG_SANITY 0x200 -#define DEBUG_SYNC 0x400 -#define DEBUG_SLEEP 0x800 -#define DEBUG_PIXEL 0x1000 -#define DEBUG_STATS 0x2000 -#define DEBUG_TILE 0x4000 -#define DEBUG_SINGLE_THREAD 0x8000 -#define DEBUG_WM 0x10000 -#define DEBUG_URB 0x20000 -#define DEBUG_VS 0x40000 -#define DEBUG_BATCH 0x80000 -#define DEBUG_BUFMGR 0x100000 -#define DEBUG_BLIT 0x200000 -#define DEBUG_REGION 0x400000 -#define DEBUG_MIPTREE 0x800000 - -#define DBG(...) do { \ - if (BRW_DEBUG & FILE_DEBUG_FLAG) \ - debug_printf(__VA_ARGS__); \ -} while(0) - -#define PRINT(...) do { \ - debug_printf(brw->pipe.winsys, __VA_ARGS__); \ -} while(0) - -struct brw_state_flags { - unsigned cache; - unsigned brw; -}; - - -struct brw_vertex_program { - struct pipe_shader_state program; - struct tgsi_shader_info info; - int id; -}; - - -struct brw_fragment_program { - struct pipe_shader_state program; - struct tgsi_shader_info info; - - boolean UsesDepth; /* XXX add this to tgsi_shader_info? */ - int id; -}; - - -struct pipe_setup_linkage { - struct { - unsigned vp_output:5; - unsigned interp_mode:4; - unsigned bf_vp_output:5; - } fp_input[PIPE_MAX_SHADER_INPUTS]; - - unsigned fp_input_count:5; - unsigned max_vp_output:5; -}; - - - -struct brw_texture { - struct pipe_texture base; - - /* Derived from the above: - */ - unsigned pitch; - unsigned depth_pitch; /* per-image on i945? */ - unsigned total_height; - - unsigned nr_images[PIPE_MAX_TEXTURE_LEVELS]; - - /* Explicitly store the offset of each image for each cube face or - * depth value. Pretty much have to accept that hardware formats - * are going to be so diverse that there is no unified way to - * compute the offsets of depth/cube images within a mipmap level, - * so have to store them as a lookup table: - */ - unsigned *image_offset[PIPE_MAX_TEXTURE_LEVELS]; /**< array [depth] of offsets */ - - /* Includes image offset tables: - */ - unsigned level_offset[PIPE_MAX_TEXTURE_LEVELS]; - - /* The data is held here: - */ - struct pipe_buffer *buffer; -}; - -/* Data about a particular attempt to compile a program. Note that - * there can be many of these, each in a different GL state - * corresponding to a different brw_wm_prog_key struct, with different - * compiled programs: - */ -/* Data about a particular attempt to compile a program. Note that - * there can be many of these, each in a different GL state - * corresponding to a different brw_wm_prog_key struct, with different - * compiled programs: - */ - -struct brw_wm_prog_data { - unsigned curb_read_length; - unsigned urb_read_length; - - unsigned first_curbe_grf; - unsigned total_grf; - unsigned total_scratch; - - /* Internally generated constants for the CURBE. These are loaded - * ahead of the data from the constant buffer. - */ - const float internal_const[8]; - unsigned nr_internal_consts; - unsigned max_const; - - boolean error; -}; - -struct brw_sf_prog_data { - unsigned urb_read_length; - unsigned total_grf; - - /* Each vertex may have upto 12 attributes, 4 components each, - * except WPOS which requires only 2. (11*4 + 2) == 44 ==> 11 - * rows. - * - * Actually we use 4 for each, so call it 12 rows. - */ - unsigned urb_entry_size; -}; - -struct brw_clip_prog_data { - unsigned curb_read_length; /* user planes? */ - unsigned clip_mode; - unsigned urb_read_length; - unsigned total_grf; -}; - -struct brw_gs_prog_data { - unsigned urb_read_length; - unsigned total_grf; -}; - -struct brw_vs_prog_data { - unsigned curb_read_length; - unsigned urb_read_length; - unsigned total_grf; - unsigned outputs_written; - - unsigned inputs_read; - - unsigned max_const; - - float imm_buf[PIPE_MAX_CONSTANT][4]; - unsigned num_imm; - unsigned num_consts; - - /* Used for calculating urb partitions: - */ - unsigned urb_entry_size; -}; - - -#define BRW_MAX_TEX_UNIT 8 -#define BRW_WM_MAX_SURF BRW_MAX_TEX_UNIT + 1 - -/* Create a fixed sized struct for caching binding tables: - */ -struct brw_surface_binding_table { - unsigned surf_ss_offset[BRW_WM_MAX_SURF]; -}; - - -struct brw_cache; - -struct brw_mem_pool { - struct pipe_buffer *buffer; - - unsigned size; - unsigned offset; /* offset of first free byte */ - - struct brw_context *brw; -}; - -struct brw_cache_item { - unsigned hash; - unsigned key_size; /* for variable-sized keys */ - const void *key; - - unsigned offset; /* offset within pool's buffer */ - unsigned data_size; - - struct brw_cache_item *next; -}; - - - -struct brw_cache { - unsigned id; - - const char *name; - - struct brw_context *brw; - struct brw_mem_pool *pool; - - struct brw_cache_item **items; - unsigned size, n_items; - - unsigned key_size; /* for fixed-size keys */ - unsigned aux_size; - - unsigned last_addr; /* offset of active item */ -}; - - - - -/* Considered adding a member to this struct to document which flags - * an update might raise so that ordering of the state atoms can be - * checked or derived at runtime. Dropped the idea in favor of having - * a debug mode where the state is monitored for flags which are - * raised that have already been tested against. - */ -struct brw_tracked_state { - struct brw_state_flags dirty; - void (*update)( struct brw_context *brw ); -}; - - -/* Flags for brw->state.cache. - */ -#define CACHE_NEW_CC_VP (1< 32. Wouldn't life - * be easier if C allowed arrays of packed elements? - */ -#define ATTRIB_BIT_DWORDS ((PIPE_MAX_ATTRIBS+31)/32) - - - - -struct brw_vertex_info { - unsigned varying; /* varying:1[PIPE_MAX_ATTRIBS] */ - unsigned sizes[ATTRIB_BIT_DWORDS * 2]; /* sizes:2[PIPE_MAX_ATTRIBS] */ -}; - - - - - -struct brw_context -{ - struct pipe_context pipe; - struct brw_winsys *winsys; - - unsigned primitive; - unsigned reduced_primitive; - - boolean emit_state_always; - - struct { - struct brw_state_flags dirty; - } state; - - - struct { - const struct pipe_blend_state *Blend; - const struct pipe_depth_stencil_alpha_state *DepthStencil; - const struct pipe_poly_stipple *PolygonStipple; - const struct pipe_rasterizer_state *Raster; - const struct pipe_sampler_state *Samplers[PIPE_MAX_SAMPLERS]; - const struct brw_vertex_program *VertexProgram; - const struct brw_fragment_program *FragmentProgram; - - struct pipe_clip_state Clip; - struct pipe_blend_color BlendColor; - struct pipe_scissor_state Scissor; - struct pipe_viewport_state Viewport; - struct pipe_framebuffer_state FrameBuffer; - - const struct pipe_constant_buffer *Constants[2]; - const struct brw_texture *Texture[PIPE_MAX_SAMPLERS]; - } attribs; - - unsigned num_samplers; - unsigned num_textures; - - struct brw_mem_pool pool[BRW_MAX_POOL]; - struct brw_cache cache[BRW_MAX_CACHE]; - struct brw_cached_batch_item *cached_batch_items; - - struct { - - /* Arrays with buffer objects to copy non-bufferobj arrays into - * for upload: - */ - const struct pipe_vertex_buffer *vbo_array[PIPE_MAX_ATTRIBS]; - - struct brw_vertex_element_state inputs[PIPE_MAX_ATTRIBS]; - -#define BRW_NR_UPLOAD_BUFS 17 -#define BRW_UPLOAD_INIT_SIZE (128*1024) - - /* Summary of size and varying of active arrays, so we can check - * for changes to this state: - */ - struct brw_vertex_info info; - } vb; - - - unsigned hardware_dirty; - unsigned dirty; - unsigned pci_id; - /* BRW_NEW_URB_ALLOCATIONS: - */ - struct { - unsigned vsize; /* vertex size plus header in urb registers */ - unsigned csize; /* constant buffer size in urb registers */ - unsigned sfsize; /* setup data size in urb registers */ - - boolean constrained; - - unsigned nr_vs_entries; - unsigned nr_gs_entries; - unsigned nr_clip_entries; - unsigned nr_sf_entries; - unsigned nr_cs_entries; - -/* unsigned vs_size; */ -/* unsigned gs_size; */ -/* unsigned clip_size; */ -/* unsigned sf_size; */ -/* unsigned cs_size; */ - - unsigned vs_start; - unsigned gs_start; - unsigned clip_start; - unsigned sf_start; - unsigned cs_start; - } urb; - - - /* BRW_NEW_CURBE_OFFSETS: - */ - struct { - unsigned wm_start; - unsigned wm_size; - unsigned clip_start; - unsigned clip_size; - unsigned vs_start; - unsigned vs_size; - unsigned total_size; - - unsigned gs_offset; - - float *last_buf; - unsigned last_bufsz; - } curbe; - - struct { - struct brw_vs_prog_data *prog_data; - - unsigned prog_gs_offset; - unsigned state_gs_offset; - } vs; - - struct { - struct brw_gs_prog_data *prog_data; - - boolean prog_active; - unsigned prog_gs_offset; - unsigned state_gs_offset; - } gs; - - struct { - struct brw_clip_prog_data *prog_data; - - unsigned prog_gs_offset; - unsigned vp_gs_offset; - unsigned state_gs_offset; - } clip; - - - struct { - struct brw_sf_prog_data *prog_data; - - struct pipe_setup_linkage linkage; - - unsigned prog_gs_offset; - unsigned vp_gs_offset; - unsigned state_gs_offset; - } sf; - - struct { - struct brw_wm_prog_data *prog_data; - -// struct brw_wm_compiler *compile_data; - - - /** - * Array of sampler state uploaded at sampler_gs_offset of BRW_SAMPLER - * cache - */ - struct brw_sampler_state sampler[BRW_MAX_TEX_UNIT]; - - unsigned render_surf; - unsigned nr_surfaces; - - unsigned max_threads; - struct pipe_buffer *scratch_buffer; - unsigned scratch_buffer_size; - - unsigned sampler_count; - unsigned sampler_gs_offset; - - struct brw_surface_binding_table bind; - unsigned bind_ss_offset; - - unsigned prog_gs_offset; - unsigned state_gs_offset; - } wm; - - - struct { - unsigned vp_gs_offset; - unsigned state_gs_offset; - } cc; - - - /* Used to give every program string a unique id - */ - unsigned program_id; -}; - - -#define BRW_PACKCOLOR8888(r,g,b,a) ((r<<24) | (g<<16) | (b<<8) | a) - - -/*====================================================================== - * brw_vtbl.c - */ -void brw_do_flush( struct brw_context *brw, - unsigned flags ); - - -/*====================================================================== - * brw_state.c - */ -void brw_validate_state(struct brw_context *brw); -void brw_init_state(struct brw_context *brw); -void brw_destroy_state(struct brw_context *brw); - - -/*====================================================================== - * brw_tex.c - */ -void brwUpdateTextureState( struct brw_context *brw ); - - -/* brw_urb.c - */ -void brw_upload_urb_fence(struct brw_context *brw); - -void brw_upload_constant_buffer_state(struct brw_context *brw); - -void brw_init_surface_functions(struct brw_context *brw); -void brw_init_state_functions(struct brw_context *brw); -void brw_init_flush_functions(struct brw_context *brw); -void brw_init_string_functions(struct brw_context *brw); - -/*====================================================================== - * Inline conversion functions. These are better-typed than the - * macros used previously: - */ -static inline struct brw_context * -brw_context( struct pipe_context *ctx ) -{ - return (struct brw_context *)ctx; -} - -#endif - +/* + Copyright (C) Intel Corp. 2006. All Rights Reserved. + Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to + develop this 3D driver. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + "Software"), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice (including the + next paragraph) shall be included in all copies or substantial + portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE + LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION + OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + + **********************************************************************/ + /* + * Authors: + * Keith Whitwell + */ + + +#ifndef BRWCONTEXT_INC +#define BRWCONTEXT_INC + + +#include "pipe/p_context.h" +#include "pipe/p_defines.h" +#include "pipe/p_state.h" + +#include "tgsi/util/tgsi_scan.h" + +#include "brw_structs.h" +#include "brw_winsys.h" + + +/* Glossary: + * + * URB - uniform resource buffer. A mid-sized buffer which is + * partitioned between the fixed function units and used for passing + * values (vertices, primitives, constants) between them. + * + * CURBE - constant URB entry. An urb region (entry) used to hold + * constant values which the fixed function units can be instructed to + * preload into the GRF when spawining a thread. + * + * VUE - vertex URB entry. An urb entry holding a vertex and usually + * a vertex header. The header contains control information and + * things like primitive type, Begin/end flags and clip codes. + * + * PUE - primitive URB entry. An urb entry produced by the setup (SF) + * unit holding rasterization and interpolation parameters. + * + * GRF - general register file. One of several register files + * addressable by programmed threads. The inputs (r0, payload, curbe, + * urb) of the thread are preloaded to this area before the thread is + * spawned. The registers are individually 8 dwords wide and suitable + * for general usage. Registers holding thread input values are not + * special and may be overwritten. + * + * MRF - message register file. Threads communicate (and terminate) + * by sending messages. Message parameters are placed in contigous + * MRF registers. All program output is via these messages. URB + * entries are populated by sending a message to the shared URB + * function containing the new data, together with a control word, + * often an unmodified copy of R0. + * + * R0 - GRF register 0. Typically holds control information used when + * sending messages to other threads. + * + * EU or GEN4 EU: The name of the programmable subsystem of the + * i965 hardware. Threads are executed by the EU, the registers + * described above are part of the EU architecture. + * + * Fixed function units: + * + * CS - Command streamer. Notional first unit, little software + * interaction. Holds the URB entries used for constant data, ie the + * CURBEs. + * + * VF/VS - Vertex Fetch / Vertex Shader. The fixed function part of + * this unit is responsible for pulling vertices out of vertex buffers + * in vram and injecting them into the processing pipe as VUEs. If + * enabled, it first passes them to a VS thread which is a good place + * for the driver to implement any active vertex shader. + * + * GS - Geometry Shader. This corresponds to a new DX10 concept. If + * enabled, incoming strips etc are passed to GS threads in individual + * line/triangle/point units. The GS thread may perform arbitary + * computation and emit whatever primtives with whatever vertices it + * chooses. This makes GS an excellent place to implement GL's + * unfilled polygon modes, though of course it is capable of much + * more. Additionally, GS is used to translate away primitives not + * handled by latter units, including Quads and Lineloops. + * + * CS - Clipper. Mesa's clipping algorithms are imported to run on + * this unit. The fixed function part performs cliptesting against + * the 6 fixed clipplanes and makes descisions on whether or not the + * incoming primitive needs to be passed to a thread for clipping. + * User clip planes are handled via cooperation with the VS thread. + * + * SF - Strips Fans or Setup: Triangles are prepared for + * rasterization. Interpolation coefficients are calculated. + * Flatshading and two-side lighting usually performed here. + * + * WM - Windower. Interpolation of vertex attributes performed here. + * Fragment shader implemented here. SIMD aspects of EU taken full + * advantage of, as pixels are processed in blocks of 16. + * + * CC - Color Calculator. No EU threads associated with this unit. + * Handles blending and (presumably) depth and stencil testing. + */ + +#define BRW_MAX_CURBE (32*16) + +struct brw_context; +struct brw_winsys; + + +/* Raised when we receive new state across the pipe interface: + */ +#define BRW_NEW_VIEWPORT 0x1 +#define BRW_NEW_RASTERIZER 0x2 +#define BRW_NEW_FS 0x4 +#define BRW_NEW_BLEND 0x8 +#define BRW_NEW_CLIP 0x10 +#define BRW_NEW_SCISSOR 0x20 +#define BRW_NEW_STIPPLE 0x40 +#define BRW_NEW_FRAMEBUFFER 0x80 +#define BRW_NEW_ALPHA_TEST 0x100 +#define BRW_NEW_DEPTH_STENCIL 0x200 +#define BRW_NEW_SAMPLER 0x400 +#define BRW_NEW_TEXTURE 0x800 +#define BRW_NEW_CONSTANTS 0x1000 +#define BRW_NEW_VBO 0x2000 +#define BRW_NEW_VS 0x4000 + +/* Raised for other internal events: + */ +#define BRW_NEW_URB_FENCE 0x10000 +#define BRW_NEW_PSP 0x20000 +#define BRW_NEW_CURBE_OFFSETS 0x40000 +#define BRW_NEW_REDUCED_PRIMITIVE 0x80000 +#define BRW_NEW_PRIMITIVE 0x100000 +#define BRW_NEW_SCENE 0x200000 +#define BRW_NEW_SF_LINKAGE 0x400000 + +extern int BRW_DEBUG; + +#define DEBUG_TEXTURE 0x1 +#define DEBUG_STATE 0x2 +#define DEBUG_IOCTL 0x4 +#define DEBUG_PRIMS 0x8 +#define DEBUG_VERTS 0x10 +#define DEBUG_FALLBACKS 0x20 +#define DEBUG_VERBOSE 0x40 +#define DEBUG_DRI 0x80 +#define DEBUG_DMA 0x100 +#define DEBUG_SANITY 0x200 +#define DEBUG_SYNC 0x400 +#define DEBUG_SLEEP 0x800 +#define DEBUG_PIXEL 0x1000 +#define DEBUG_STATS 0x2000 +#define DEBUG_TILE 0x4000 +#define DEBUG_SINGLE_THREAD 0x8000 +#define DEBUG_WM 0x10000 +#define DEBUG_URB 0x20000 +#define DEBUG_VS 0x40000 +#define DEBUG_BATCH 0x80000 +#define DEBUG_BUFMGR 0x100000 +#define DEBUG_BLIT 0x200000 +#define DEBUG_REGION 0x400000 +#define DEBUG_MIPTREE 0x800000 + +#define DBG(...) do { \ + if (BRW_DEBUG & FILE_DEBUG_FLAG) \ + debug_printf(__VA_ARGS__); \ +} while(0) + +#define PRINT(...) do { \ + debug_printf(brw->pipe.winsys, __VA_ARGS__); \ +} while(0) + +struct brw_state_flags { + unsigned cache; + unsigned brw; +}; + + +struct brw_vertex_program { + struct pipe_shader_state program; + struct tgsi_shader_info info; + int id; +}; + + +struct brw_fragment_program { + struct pipe_shader_state program; + struct tgsi_shader_info info; + + boolean UsesDepth; /* XXX add this to tgsi_shader_info? */ + int id; +}; + + +struct pipe_setup_linkage { + struct { + unsigned vp_output:5; + unsigned interp_mode:4; + unsigned bf_vp_output:5; + } fp_input[PIPE_MAX_SHADER_INPUTS]; + + unsigned fp_input_count:5; + unsigned max_vp_output:5; +}; + + + +struct brw_texture { + struct pipe_texture base; + + /* Derived from the above: + */ + unsigned pitch; + unsigned depth_pitch; /* per-image on i945? */ + unsigned total_height; + + unsigned nr_images[PIPE_MAX_TEXTURE_LEVELS]; + + /* Explicitly store the offset of each image for each cube face or + * depth value. Pretty much have to accept that hardware formats + * are going to be so diverse that there is no unified way to + * compute the offsets of depth/cube images within a mipmap level, + * so have to store them as a lookup table: + */ + unsigned *image_offset[PIPE_MAX_TEXTURE_LEVELS]; /**< array [depth] of offsets */ + + /* Includes image offset tables: + */ + unsigned level_offset[PIPE_MAX_TEXTURE_LEVELS]; + + /* The data is held here: + */ + struct pipe_buffer *buffer; +}; + +/* Data about a particular attempt to compile a program. Note that + * there can be many of these, each in a different GL state + * corresponding to a different brw_wm_prog_key struct, with different + * compiled programs: + */ +/* Data about a particular attempt to compile a program. Note that + * there can be many of these, each in a different GL state + * corresponding to a different brw_wm_prog_key struct, with different + * compiled programs: + */ + +struct brw_wm_prog_data { + unsigned curb_read_length; + unsigned urb_read_length; + + unsigned first_curbe_grf; + unsigned total_grf; + unsigned total_scratch; + + /* Internally generated constants for the CURBE. These are loaded + * ahead of the data from the constant buffer. + */ + const float internal_const[8]; + unsigned nr_internal_consts; + unsigned max_const; + + boolean error; +}; + +struct brw_sf_prog_data { + unsigned urb_read_length; + unsigned total_grf; + + /* Each vertex may have upto 12 attributes, 4 components each, + * except WPOS which requires only 2. (11*4 + 2) == 44 ==> 11 + * rows. + * + * Actually we use 4 for each, so call it 12 rows. + */ + unsigned urb_entry_size; +}; + +struct brw_clip_prog_data { + unsigned curb_read_length; /* user planes? */ + unsigned clip_mode; + unsigned urb_read_length; + unsigned total_grf; +}; + +struct brw_gs_prog_data { + unsigned urb_read_length; + unsigned total_grf; +}; + +struct brw_vs_prog_data { + unsigned curb_read_length; + unsigned urb_read_length; + unsigned total_grf; + unsigned outputs_written; + + unsigned inputs_read; + + unsigned max_const; + + float imm_buf[PIPE_MAX_CONSTANT][4]; + unsigned num_imm; + unsigned num_consts; + + /* Used for calculating urb partitions: + */ + unsigned urb_entry_size; +}; + + +#define BRW_MAX_TEX_UNIT 8 +#define BRW_WM_MAX_SURF BRW_MAX_TEX_UNIT + 1 + +/* Create a fixed sized struct for caching binding tables: + */ +struct brw_surface_binding_table { + unsigned surf_ss_offset[BRW_WM_MAX_SURF]; +}; + + +struct brw_cache; + +struct brw_mem_pool { + struct pipe_buffer *buffer; + + unsigned size; + unsigned offset; /* offset of first free byte */ + + struct brw_context *brw; +}; + +struct brw_cache_item { + unsigned hash; + unsigned key_size; /* for variable-sized keys */ + const void *key; + + unsigned offset; /* offset within pool's buffer */ + unsigned data_size; + + struct brw_cache_item *next; +}; + + + +struct brw_cache { + unsigned id; + + const char *name; + + struct brw_context *brw; + struct brw_mem_pool *pool; + + struct brw_cache_item **items; + unsigned size, n_items; + + unsigned key_size; /* for fixed-size keys */ + unsigned aux_size; + + unsigned last_addr; /* offset of active item */ +}; + + + + +/* Considered adding a member to this struct to document which flags + * an update might raise so that ordering of the state atoms can be + * checked or derived at runtime. Dropped the idea in favor of having + * a debug mode where the state is monitored for flags which are + * raised that have already been tested against. + */ +struct brw_tracked_state { + struct brw_state_flags dirty; + void (*update)( struct brw_context *brw ); +}; + + +/* Flags for brw->state.cache. + */ +#define CACHE_NEW_CC_VP (1< 32. Wouldn't life + * be easier if C allowed arrays of packed elements? + */ +#define ATTRIB_BIT_DWORDS ((PIPE_MAX_ATTRIBS+31)/32) + + + + +struct brw_vertex_info { + unsigned varying; /* varying:1[PIPE_MAX_ATTRIBS] */ + unsigned sizes[ATTRIB_BIT_DWORDS * 2]; /* sizes:2[PIPE_MAX_ATTRIBS] */ +}; + + + + + +struct brw_context +{ + struct pipe_context pipe; + struct brw_winsys *winsys; + + unsigned primitive; + unsigned reduced_primitive; + + boolean emit_state_always; + + struct { + struct brw_state_flags dirty; + } state; + + + struct { + const struct pipe_blend_state *Blend; + const struct pipe_depth_stencil_alpha_state *DepthStencil; + const struct pipe_poly_stipple *PolygonStipple; + const struct pipe_rasterizer_state *Raster; + const struct pipe_sampler_state *Samplers[PIPE_MAX_SAMPLERS]; + const struct brw_vertex_program *VertexProgram; + const struct brw_fragment_program *FragmentProgram; + + struct pipe_clip_state Clip; + struct pipe_blend_color BlendColor; + struct pipe_scissor_state Scissor; + struct pipe_viewport_state Viewport; + struct pipe_framebuffer_state FrameBuffer; + + const struct pipe_constant_buffer *Constants[2]; + const struct brw_texture *Texture[PIPE_MAX_SAMPLERS]; + } attribs; + + unsigned num_samplers; + unsigned num_textures; + + struct brw_mem_pool pool[BRW_MAX_POOL]; + struct brw_cache cache[BRW_MAX_CACHE]; + struct brw_cached_batch_item *cached_batch_items; + + struct { + + /* Arrays with buffer objects to copy non-bufferobj arrays into + * for upload: + */ + const struct pipe_vertex_buffer *vbo_array[PIPE_MAX_ATTRIBS]; + + struct brw_vertex_element_state inputs[PIPE_MAX_ATTRIBS]; + +#define BRW_NR_UPLOAD_BUFS 17 +#define BRW_UPLOAD_INIT_SIZE (128*1024) + + /* Summary of size and varying of active arrays, so we can check + * for changes to this state: + */ + struct brw_vertex_info info; + } vb; + + + unsigned hardware_dirty; + unsigned dirty; + unsigned pci_id; + /* BRW_NEW_URB_ALLOCATIONS: + */ + struct { + unsigned vsize; /* vertex size plus header in urb registers */ + unsigned csize; /* constant buffer size in urb registers */ + unsigned sfsize; /* setup data size in urb registers */ + + boolean constrained; + + unsigned nr_vs_entries; + unsigned nr_gs_entries; + unsigned nr_clip_entries; + unsigned nr_sf_entries; + unsigned nr_cs_entries; + +/* unsigned vs_size; */ +/* unsigned gs_size; */ +/* unsigned clip_size; */ +/* unsigned sf_size; */ +/* unsigned cs_size; */ + + unsigned vs_start; + unsigned gs_start; + unsigned clip_start; + unsigned sf_start; + unsigned cs_start; + } urb; + + + /* BRW_NEW_CURBE_OFFSETS: + */ + struct { + unsigned wm_start; + unsigned wm_size; + unsigned clip_start; + unsigned clip_size; + unsigned vs_start; + unsigned vs_size; + unsigned total_size; + + unsigned gs_offset; + + float *last_buf; + unsigned last_bufsz; + } curbe; + + struct { + struct brw_vs_prog_data *prog_data; + + unsigned prog_gs_offset; + unsigned state_gs_offset; + } vs; + + struct { + struct brw_gs_prog_data *prog_data; + + boolean prog_active; + unsigned prog_gs_offset; + unsigned state_gs_offset; + } gs; + + struct { + struct brw_clip_prog_data *prog_data; + + unsigned prog_gs_offset; + unsigned vp_gs_offset; + unsigned state_gs_offset; + } clip; + + + struct { + struct brw_sf_prog_data *prog_data; + + struct pipe_setup_linkage linkage; + + unsigned prog_gs_offset; + unsigned vp_gs_offset; + unsigned state_gs_offset; + } sf; + + struct { + struct brw_wm_prog_data *prog_data; + +// struct brw_wm_compiler *compile_data; + + + /** + * Array of sampler state uploaded at sampler_gs_offset of BRW_SAMPLER + * cache + */ + struct brw_sampler_state sampler[BRW_MAX_TEX_UNIT]; + + unsigned render_surf; + unsigned nr_surfaces; + + unsigned max_threads; + struct pipe_buffer *scratch_buffer; + unsigned scratch_buffer_size; + + unsigned sampler_count; + unsigned sampler_gs_offset; + + struct brw_surface_binding_table bind; + unsigned bind_ss_offset; + + unsigned prog_gs_offset; + unsigned state_gs_offset; + } wm; + + + struct { + unsigned vp_gs_offset; + unsigned state_gs_offset; + } cc; + + + /* Used to give every program string a unique id + */ + unsigned program_id; +}; + + +#define BRW_PACKCOLOR8888(r,g,b,a) ((r<<24) | (g<<16) | (b<<8) | a) + + +/*====================================================================== + * brw_vtbl.c + */ +void brw_do_flush( struct brw_context *brw, + unsigned flags ); + + +/*====================================================================== + * brw_state.c + */ +void brw_validate_state(struct brw_context *brw); +void brw_init_state(struct brw_context *brw); +void brw_destroy_state(struct brw_context *brw); + + +/*====================================================================== + * brw_tex.c + */ +void brwUpdateTextureState( struct brw_context *brw ); + + +/* brw_urb.c + */ +void brw_upload_urb_fence(struct brw_context *brw); + +void brw_upload_constant_buffer_state(struct brw_context *brw); + +void brw_init_surface_functions(struct brw_context *brw); +void brw_init_state_functions(struct brw_context *brw); +void brw_init_flush_functions(struct brw_context *brw); +void brw_init_string_functions(struct brw_context *brw); + +/*====================================================================== + * Inline conversion functions. These are better-typed than the + * macros used previously: + */ +static inline struct brw_context * +brw_context( struct pipe_context *ctx ) +{ + return (struct brw_context *)ctx; +} + +#endif + diff --git a/src/gallium/drivers/i965simple/brw_state.c b/src/gallium/drivers/i965simple/brw_state.c index ac243b7e4f9..caeeba46300 100644 --- a/src/gallium/drivers/i965simple/brw_state.c +++ b/src/gallium/drivers/i965simple/brw_state.c @@ -1,469 +1,469 @@ -/************************************************************************** - * - * Copyright 2007 Tungsten Graphics, Inc., Cedar Park, Texas. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sub license, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. - * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR - * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - **************************************************************************/ - -/* Authors: Zack Rusin - * Keith Whitwell - */ - - -#include "pipe/p_winsys.h" -#include "pipe/p_util.h" -#include "pipe/p_inlines.h" -#include "pipe/p_shader_tokens.h" -#include "tgsi/util/tgsi_dump.h" -#include "tgsi/util/tgsi_parse.h" - -#include "brw_context.h" -#include "brw_defines.h" -#include "brw_state.h" -#include "brw_draw.h" - - -#define DUP( TYPE, VAL ) \ -do { \ - struct TYPE *x = malloc(sizeof(*x)); \ - memcpy(x, VAL, sizeof(*x) ); \ - return x; \ -} while (0) - -/************************************************************************ - * Blend - */ -static void * -brw_create_blend_state(struct pipe_context *pipe, - const struct pipe_blend_state *blend) -{ - DUP( pipe_blend_state, blend ); -} - -static void brw_bind_blend_state(struct pipe_context *pipe, - void *blend) -{ - struct brw_context *brw = brw_context(pipe); - - brw->attribs.Blend = (struct pipe_blend_state*)blend; - brw->state.dirty.brw |= BRW_NEW_BLEND; -} - - -static void brw_delete_blend_state(struct pipe_context *pipe, void *blend) -{ - free(blend); -} - -static void brw_set_blend_color( struct pipe_context *pipe, - const struct pipe_blend_color *blend_color ) -{ - struct brw_context *brw = brw_context(pipe); - - brw->attribs.BlendColor = *blend_color; - - brw->state.dirty.brw |= BRW_NEW_BLEND; -} - -/************************************************************************ - * Sampler - */ - -static void * -brw_create_sampler_state(struct pipe_context *pipe, - const struct pipe_sampler_state *sampler) -{ - DUP( pipe_sampler_state, sampler ); -} - -static void brw_bind_sampler_states(struct pipe_context *pipe, - unsigned num, void **sampler) -{ - struct brw_context *brw = brw_context(pipe); - - assert(num <= PIPE_MAX_SAMPLERS); - - /* Check for no-op */ - if (num == brw->num_samplers && - !memcmp(brw->attribs.Samplers, sampler, num * sizeof(void *))) - return; - - memcpy(brw->attribs.Samplers, sampler, num * sizeof(void *)); - memset(&brw->attribs.Samplers[num], 0, (PIPE_MAX_SAMPLERS - num) * - sizeof(void *)); - - brw->num_samplers = num; - - brw->state.dirty.brw |= BRW_NEW_SAMPLER; -} - -static void brw_delete_sampler_state(struct pipe_context *pipe, - void *sampler) -{ - free(sampler); -} - - -/************************************************************************ - * Depth stencil - */ - -static void * -brw_create_depth_stencil_state(struct pipe_context *pipe, - const struct pipe_depth_stencil_alpha_state *depth_stencil) -{ - DUP( pipe_depth_stencil_alpha_state, depth_stencil ); -} - -static void brw_bind_depth_stencil_state(struct pipe_context *pipe, - void *depth_stencil) -{ - struct brw_context *brw = brw_context(pipe); - - brw->attribs.DepthStencil = (const struct pipe_depth_stencil_alpha_state *)depth_stencil; - - brw->state.dirty.brw |= BRW_NEW_DEPTH_STENCIL; -} - -static void brw_delete_depth_stencil_state(struct pipe_context *pipe, - void *depth_stencil) -{ - free(depth_stencil); -} - -/************************************************************************ - * Scissor - */ -static void brw_set_scissor_state( struct pipe_context *pipe, - const struct pipe_scissor_state *scissor ) -{ - struct brw_context *brw = brw_context(pipe); - - memcpy( &brw->attribs.Scissor, scissor, sizeof(*scissor) ); - brw->state.dirty.brw |= BRW_NEW_SCISSOR; -} - - -/************************************************************************ - * Stipple - */ - -static void brw_set_polygon_stipple( struct pipe_context *pipe, - const struct pipe_poly_stipple *stipple ) -{ -} - - -/************************************************************************ - * Fragment shader - */ - -static void * brw_create_fs_state(struct pipe_context *pipe, - const struct pipe_shader_state *shader) -{ - struct brw_fragment_program *brw_fp = CALLOC_STRUCT(brw_fragment_program); - - brw_fp->program.tokens = tgsi_dup_tokens(shader->tokens); - brw_fp->id = brw_context(pipe)->program_id++; - - tgsi_scan_shader(shader->tokens, &brw_fp->info); - -#if 0 - brw_shader_info(shader->tokens, - &brw_fp->info2); -#endif - - tgsi_dump(shader->tokens, 0); - - - return (void *)brw_fp; -} - -static void brw_bind_fs_state(struct pipe_context *pipe, void *shader) -{ - struct brw_context *brw = brw_context(pipe); - - brw->attribs.FragmentProgram = (struct brw_fragment_program *)shader; - brw->state.dirty.brw |= BRW_NEW_FS; -} - -static void brw_delete_fs_state(struct pipe_context *pipe, void *shader) -{ - struct brw_fragment_program *brw_fp = (struct brw_fragment_program *) shader; - - FREE((void *) brw_fp->program.tokens); - FREE(brw_fp); -} - - -/************************************************************************ - * Vertex shader and other TNL state - */ - -static void *brw_create_vs_state(struct pipe_context *pipe, - const struct pipe_shader_state *shader) -{ - struct brw_vertex_program *brw_vp = CALLOC_STRUCT(brw_vertex_program); - - brw_vp->program.tokens = tgsi_dup_tokens(shader->tokens); - brw_vp->id = brw_context(pipe)->program_id++; - - tgsi_scan_shader(shader->tokens, &brw_vp->info); - -#if 0 - brw_shader_info(shader->tokens, - &brw_vp->info2); -#endif - tgsi_dump(shader->tokens, 0); - - return (void *)brw_vp; -} - -static void brw_bind_vs_state(struct pipe_context *pipe, void *vs) -{ - struct brw_context *brw = brw_context(pipe); - - brw->attribs.VertexProgram = (struct brw_vertex_program *)vs; - brw->state.dirty.brw |= BRW_NEW_VS; - - debug_printf("YYYYYYYYYYYYY BINDING VERTEX SHADER\n"); -} - -static void brw_delete_vs_state(struct pipe_context *pipe, void *shader) -{ - struct brw_vertex_program *brw_vp = (struct brw_vertex_program *) shader; - - FREE((void *) brw_vp->program.tokens); - FREE(brw_vp); -} - - -static void brw_set_clip_state( struct pipe_context *pipe, - const struct pipe_clip_state *clip ) -{ - struct brw_context *brw = brw_context(pipe); - - brw->attribs.Clip = *clip; -} - - -static void brw_set_viewport_state( struct pipe_context *pipe, - const struct pipe_viewport_state *viewport ) -{ - struct brw_context *brw = brw_context(pipe); - - brw->attribs.Viewport = *viewport; /* struct copy */ - brw->state.dirty.brw |= BRW_NEW_VIEWPORT; - - /* pass the viewport info to the draw module */ - //draw_set_viewport_state(brw->draw, viewport); -} - - -static void brw_set_vertex_buffers(struct pipe_context *pipe, - unsigned count, - const struct pipe_vertex_buffer *buffers) -{ - struct brw_context *brw = brw_context(pipe); - memcpy(brw->vb.vbo_array, buffers, count * sizeof(buffers[0])); -} - -static void brw_set_vertex_elements(struct pipe_context *pipe, - unsigned count, - const struct pipe_vertex_element *elements) -{ - /* flush ? */ - struct brw_context *brw = brw_context(pipe); - uint i; - - assert(count <= PIPE_MAX_ATTRIBS); - - for (i = 0; i < count; i++) { - struct brw_vertex_element_state el; - memset(&el, 0, sizeof(el)); - - el.ve0.src_offset = elements[i].src_offset; - el.ve0.src_format = brw_translate_surface_format(elements[i].src_format); - el.ve0.valid = 1; - el.ve0.vertex_buffer_index = elements[i].vertex_buffer_index; - - el.ve1.dst_offset = i * 4; - - el.ve1.vfcomponent3 = BRW_VFCOMPONENT_STORE_SRC; - el.ve1.vfcomponent2 = BRW_VFCOMPONENT_STORE_SRC; - el.ve1.vfcomponent1 = BRW_VFCOMPONENT_STORE_SRC; - el.ve1.vfcomponent0 = BRW_VFCOMPONENT_STORE_SRC; - - switch (elements[i].nr_components) { - case 1: el.ve1.vfcomponent1 = BRW_VFCOMPONENT_STORE_0; - case 2: el.ve1.vfcomponent2 = BRW_VFCOMPONENT_STORE_0; - case 3: el.ve1.vfcomponent3 = BRW_VFCOMPONENT_STORE_1_FLT; - break; - } - - brw->vb.inputs[i] = el; - } -} - - - -/************************************************************************ - * Constant buffers - */ - -static void brw_set_constant_buffer(struct pipe_context *pipe, - uint shader, uint index, - const struct pipe_constant_buffer *buf) -{ - struct brw_context *brw = brw_context(pipe); - - assert(buf == 0 || index == 0); - - brw->attribs.Constants[shader] = buf; - brw->state.dirty.brw |= BRW_NEW_CONSTANTS; -} - - -/************************************************************************ - * Texture surfaces - */ - - -static void brw_set_sampler_textures(struct pipe_context *pipe, - unsigned num, - struct pipe_texture **texture) -{ - struct brw_context *brw = brw_context(pipe); - uint i; - - assert(num <= PIPE_MAX_SAMPLERS); - - /* Check for no-op */ - if (num == brw->num_textures && - !memcmp(brw->attribs.Texture, texture, num * - sizeof(struct pipe_texture *))) - return; - - for (i = 0; i < num; i++) - pipe_texture_reference((struct pipe_texture **) &brw->attribs.Texture[i], - texture[i]); - - for (i = num; i < brw->num_textures; i++) - pipe_texture_reference((struct pipe_texture **) &brw->attribs.Texture[i], - NULL); - - brw->num_textures = num; - - brw->state.dirty.brw |= BRW_NEW_TEXTURE; -} - - -/************************************************************************ - * Render targets, etc - */ - -static void brw_set_framebuffer_state(struct pipe_context *pipe, - const struct pipe_framebuffer_state *fb) -{ - struct brw_context *brw = brw_context(pipe); - - brw->attribs.FrameBuffer = *fb; /* struct copy */ - - brw->state.dirty.brw |= BRW_NEW_FRAMEBUFFER; -} - - - -/************************************************************************ - * Rasterizer state - */ - -static void * -brw_create_rasterizer_state(struct pipe_context *pipe, - const struct pipe_rasterizer_state *rasterizer) -{ - DUP(pipe_rasterizer_state, rasterizer); -} - -static void brw_bind_rasterizer_state( struct pipe_context *pipe, - void *setup ) -{ - struct brw_context *brw = brw_context(pipe); - - brw->attribs.Raster = (struct pipe_rasterizer_state *)setup; - - /* Also pass-through to draw module: - */ - //draw_set_rasterizer_state(brw->draw, setup); - - brw->state.dirty.brw |= BRW_NEW_RASTERIZER; -} - -static void brw_delete_rasterizer_state(struct pipe_context *pipe, - void *setup) -{ - free(setup); -} - - - -void -brw_init_state_functions( struct brw_context *brw ) -{ - brw->pipe.create_blend_state = brw_create_blend_state; - brw->pipe.bind_blend_state = brw_bind_blend_state; - brw->pipe.delete_blend_state = brw_delete_blend_state; - - brw->pipe.create_sampler_state = brw_create_sampler_state; - brw->pipe.bind_sampler_states = brw_bind_sampler_states; - brw->pipe.delete_sampler_state = brw_delete_sampler_state; - - brw->pipe.create_depth_stencil_alpha_state = brw_create_depth_stencil_state; - brw->pipe.bind_depth_stencil_alpha_state = brw_bind_depth_stencil_state; - brw->pipe.delete_depth_stencil_alpha_state = brw_delete_depth_stencil_state; - - brw->pipe.create_rasterizer_state = brw_create_rasterizer_state; - brw->pipe.bind_rasterizer_state = brw_bind_rasterizer_state; - brw->pipe.delete_rasterizer_state = brw_delete_rasterizer_state; - brw->pipe.create_fs_state = brw_create_fs_state; - brw->pipe.bind_fs_state = brw_bind_fs_state; - brw->pipe.delete_fs_state = brw_delete_fs_state; - brw->pipe.create_vs_state = brw_create_vs_state; - brw->pipe.bind_vs_state = brw_bind_vs_state; - brw->pipe.delete_vs_state = brw_delete_vs_state; - - brw->pipe.set_blend_color = brw_set_blend_color; - brw->pipe.set_clip_state = brw_set_clip_state; - brw->pipe.set_constant_buffer = brw_set_constant_buffer; - brw->pipe.set_framebuffer_state = brw_set_framebuffer_state; - -// brw->pipe.set_feedback_state = brw_set_feedback_state; -// brw->pipe.set_feedback_buffer = brw_set_feedback_buffer; - - brw->pipe.set_polygon_stipple = brw_set_polygon_stipple; - brw->pipe.set_scissor_state = brw_set_scissor_state; - brw->pipe.set_sampler_textures = brw_set_sampler_textures; - brw->pipe.set_viewport_state = brw_set_viewport_state; - brw->pipe.set_vertex_buffers = brw_set_vertex_buffers; - brw->pipe.set_vertex_elements = brw_set_vertex_elements; -} +/************************************************************************** + * + * Copyright 2007 Tungsten Graphics, Inc., Cedar Park, Texas. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. + * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + **************************************************************************/ + +/* Authors: Zack Rusin + * Keith Whitwell + */ + + +#include "pipe/p_winsys.h" +#include "pipe/p_util.h" +#include "pipe/p_inlines.h" +#include "pipe/p_shader_tokens.h" +#include "tgsi/util/tgsi_dump.h" +#include "tgsi/util/tgsi_parse.h" + +#include "brw_context.h" +#include "brw_defines.h" +#include "brw_state.h" +#include "brw_draw.h" + + +#define DUP( TYPE, VAL ) \ +do { \ + struct TYPE *x = malloc(sizeof(*x)); \ + memcpy(x, VAL, sizeof(*x) ); \ + return x; \ +} while (0) + +/************************************************************************ + * Blend + */ +static void * +brw_create_blend_state(struct pipe_context *pipe, + const struct pipe_blend_state *blend) +{ + DUP( pipe_blend_state, blend ); +} + +static void brw_bind_blend_state(struct pipe_context *pipe, + void *blend) +{ + struct brw_context *brw = brw_context(pipe); + + brw->attribs.Blend = (struct pipe_blend_state*)blend; + brw->state.dirty.brw |= BRW_NEW_BLEND; +} + + +static void brw_delete_blend_state(struct pipe_context *pipe, void *blend) +{ + free(blend); +} + +static void brw_set_blend_color( struct pipe_context *pipe, + const struct pipe_blend_color *blend_color ) +{ + struct brw_context *brw = brw_context(pipe); + + brw->attribs.BlendColor = *blend_color; + + brw->state.dirty.brw |= BRW_NEW_BLEND; +} + +/************************************************************************ + * Sampler + */ + +static void * +brw_create_sampler_state(struct pipe_context *pipe, + const struct pipe_sampler_state *sampler) +{ + DUP( pipe_sampler_state, sampler ); +} + +static void brw_bind_sampler_states(struct pipe_context *pipe, + unsigned num, void **sampler) +{ + struct brw_context *brw = brw_context(pipe); + + assert(num <= PIPE_MAX_SAMPLERS); + + /* Check for no-op */ + if (num == brw->num_samplers && + !memcmp(brw->attribs.Samplers, sampler, num * sizeof(void *))) + return; + + memcpy(brw->attribs.Samplers, sampler, num * sizeof(void *)); + memset(&brw->attribs.Samplers[num], 0, (PIPE_MAX_SAMPLERS - num) * + sizeof(void *)); + + brw->num_samplers = num; + + brw->state.dirty.brw |= BRW_NEW_SAMPLER; +} + +static void brw_delete_sampler_state(struct pipe_context *pipe, + void *sampler) +{ + free(sampler); +} + + +/************************************************************************ + * Depth stencil + */ + +static void * +brw_create_depth_stencil_state(struct pipe_context *pipe, + const struct pipe_depth_stencil_alpha_state *depth_stencil) +{ + DUP( pipe_depth_stencil_alpha_state, depth_stencil ); +} + +static void brw_bind_depth_stencil_state(struct pipe_context *pipe, + void *depth_stencil) +{ + struct brw_context *brw = brw_context(pipe); + + brw->attribs.DepthStencil = (const struct pipe_depth_stencil_alpha_state *)depth_stencil; + + brw->state.dirty.brw |= BRW_NEW_DEPTH_STENCIL; +} + +static void brw_delete_depth_stencil_state(struct pipe_context *pipe, + void *depth_stencil) +{ + free(depth_stencil); +} + +/************************************************************************ + * Scissor + */ +static void brw_set_scissor_state( struct pipe_context *pipe, + const struct pipe_scissor_state *scissor ) +{ + struct brw_context *brw = brw_context(pipe); + + memcpy( &brw->attribs.Scissor, scissor, sizeof(*scissor) ); + brw->state.dirty.brw |= BRW_NEW_SCISSOR; +} + + +/************************************************************************ + * Stipple + */ + +static void brw_set_polygon_stipple( struct pipe_context *pipe, + const struct pipe_poly_stipple *stipple ) +{ +} + + +/************************************************************************ + * Fragment shader + */ + +static void * brw_create_fs_state(struct pipe_context *pipe, + const struct pipe_shader_state *shader) +{ + struct brw_fragment_program *brw_fp = CALLOC_STRUCT(brw_fragment_program); + + brw_fp->program.tokens = tgsi_dup_tokens(shader->tokens); + brw_fp->id = brw_context(pipe)->program_id++; + + tgsi_scan_shader(shader->tokens, &brw_fp->info); + +#if 0 + brw_shader_info(shader->tokens, + &brw_fp->info2); +#endif + + tgsi_dump(shader->tokens, 0); + + + return (void *)brw_fp; +} + +static void brw_bind_fs_state(struct pipe_context *pipe, void *shader) +{ + struct brw_context *brw = brw_context(pipe); + + brw->attribs.FragmentProgram = (struct brw_fragment_program *)shader; + brw->state.dirty.brw |= BRW_NEW_FS; +} + +static void brw_delete_fs_state(struct pipe_context *pipe, void *shader) +{ + struct brw_fragment_program *brw_fp = (struct brw_fragment_program *) shader; + + FREE((void *) brw_fp->program.tokens); + FREE(brw_fp); +} + + +/************************************************************************ + * Vertex shader and other TNL state + */ + +static void *brw_create_vs_state(struct pipe_context *pipe, + const struct pipe_shader_state *shader) +{ + struct brw_vertex_program *brw_vp = CALLOC_STRUCT(brw_vertex_program); + + brw_vp->program.tokens = tgsi_dup_tokens(shader->tokens); + brw_vp->id = brw_context(pipe)->program_id++; + + tgsi_scan_shader(shader->tokens, &brw_vp->info); + +#if 0 + brw_shader_info(shader->tokens, + &brw_vp->info2); +#endif + tgsi_dump(shader->tokens, 0); + + return (void *)brw_vp; +} + +static void brw_bind_vs_state(struct pipe_context *pipe, void *vs) +{ + struct brw_context *brw = brw_context(pipe); + + brw->attribs.VertexProgram = (struct brw_vertex_program *)vs; + brw->state.dirty.brw |= BRW_NEW_VS; + + debug_printf("YYYYYYYYYYYYY BINDING VERTEX SHADER\n"); +} + +static void brw_delete_vs_state(struct pipe_context *pipe, void *shader) +{ + struct brw_vertex_program *brw_vp = (struct brw_vertex_program *) shader; + + FREE((void *) brw_vp->program.tokens); + FREE(brw_vp); +} + + +static void brw_set_clip_state( struct pipe_context *pipe, + const struct pipe_clip_state *clip ) +{ + struct brw_context *brw = brw_context(pipe); + + brw->attribs.Clip = *clip; +} + + +static void brw_set_viewport_state( struct pipe_context *pipe, + const struct pipe_viewport_state *viewport ) +{ + struct brw_context *brw = brw_context(pipe); + + brw->attribs.Viewport = *viewport; /* struct copy */ + brw->state.dirty.brw |= BRW_NEW_VIEWPORT; + + /* pass the viewport info to the draw module */ + //draw_set_viewport_state(brw->draw, viewport); +} + + +static void brw_set_vertex_buffers(struct pipe_context *pipe, + unsigned count, + const struct pipe_vertex_buffer *buffers) +{ + struct brw_context *brw = brw_context(pipe); + memcpy(brw->vb.vbo_array, buffers, count * sizeof(buffers[0])); +} + +static void brw_set_vertex_elements(struct pipe_context *pipe, + unsigned count, + const struct pipe_vertex_element *elements) +{ + /* flush ? */ + struct brw_context *brw = brw_context(pipe); + uint i; + + assert(count <= PIPE_MAX_ATTRIBS); + + for (i = 0; i < count; i++) { + struct brw_vertex_element_state el; + memset(&el, 0, sizeof(el)); + + el.ve0.src_offset = elements[i].src_offset; + el.ve0.src_format = brw_translate_surface_format(elements[i].src_format); + el.ve0.valid = 1; + el.ve0.vertex_buffer_index = elements[i].vertex_buffer_index; + + el.ve1.dst_offset = i * 4; + + el.ve1.vfcomponent3 = BRW_VFCOMPONENT_STORE_SRC; + el.ve1.vfcomponent2 = BRW_VFCOMPONENT_STORE_SRC; + el.ve1.vfcomponent1 = BRW_VFCOMPONENT_STORE_SRC; + el.ve1.vfcomponent0 = BRW_VFCOMPONENT_STORE_SRC; + + switch (elements[i].nr_components) { + case 1: el.ve1.vfcomponent1 = BRW_VFCOMPONENT_STORE_0; + case 2: el.ve1.vfcomponent2 = BRW_VFCOMPONENT_STORE_0; + case 3: el.ve1.vfcomponent3 = BRW_VFCOMPONENT_STORE_1_FLT; + break; + } + + brw->vb.inputs[i] = el; + } +} + + + +/************************************************************************ + * Constant buffers + */ + +static void brw_set_constant_buffer(struct pipe_context *pipe, + uint shader, uint index, + const struct pipe_constant_buffer *buf) +{ + struct brw_context *brw = brw_context(pipe); + + assert(buf == 0 || index == 0); + + brw->attribs.Constants[shader] = buf; + brw->state.dirty.brw |= BRW_NEW_CONSTANTS; +} + + +/************************************************************************ + * Texture surfaces + */ + + +static void brw_set_sampler_textures(struct pipe_context *pipe, + unsigned num, + struct pipe_texture **texture) +{ + struct brw_context *brw = brw_context(pipe); + uint i; + + assert(num <= PIPE_MAX_SAMPLERS); + + /* Check for no-op */ + if (num == brw->num_textures && + !memcmp(brw->attribs.Texture, texture, num * + sizeof(struct pipe_texture *))) + return; + + for (i = 0; i < num; i++) + pipe_texture_reference((struct pipe_texture **) &brw->attribs.Texture[i], + texture[i]); + + for (i = num; i < brw->num_textures; i++) + pipe_texture_reference((struct pipe_texture **) &brw->attribs.Texture[i], + NULL); + + brw->num_textures = num; + + brw->state.dirty.brw |= BRW_NEW_TEXTURE; +} + + +/************************************************************************ + * Render targets, etc + */ + +static void brw_set_framebuffer_state(struct pipe_context *pipe, + const struct pipe_framebuffer_state *fb) +{ + struct brw_context *brw = brw_context(pipe); + + brw->attribs.FrameBuffer = *fb; /* struct copy */ + + brw->state.dirty.brw |= BRW_NEW_FRAMEBUFFER; +} + + + +/************************************************************************ + * Rasterizer state + */ + +static void * +brw_create_rasterizer_state(struct pipe_context *pipe, + const struct pipe_rasterizer_state *rasterizer) +{ + DUP(pipe_rasterizer_state, rasterizer); +} + +static void brw_bind_rasterizer_state( struct pipe_context *pipe, + void *setup ) +{ + struct brw_context *brw = brw_context(pipe); + + brw->attribs.Raster = (struct pipe_rasterizer_state *)setup; + + /* Also pass-through to draw module: + */ + //draw_set_rasterizer_state(brw->draw, setup); + + brw->state.dirty.brw |= BRW_NEW_RASTERIZER; +} + +static void brw_delete_rasterizer_state(struct pipe_context *pipe, + void *setup) +{ + free(setup); +} + + + +void +brw_init_state_functions( struct brw_context *brw ) +{ + brw->pipe.create_blend_state = brw_create_blend_state; + brw->pipe.bind_blend_state = brw_bind_blend_state; + brw->pipe.delete_blend_state = brw_delete_blend_state; + + brw->pipe.create_sampler_state = brw_create_sampler_state; + brw->pipe.bind_sampler_states = brw_bind_sampler_states; + brw->pipe.delete_sampler_state = brw_delete_sampler_state; + + brw->pipe.create_depth_stencil_alpha_state = brw_create_depth_stencil_state; + brw->pipe.bind_depth_stencil_alpha_state = brw_bind_depth_stencil_state; + brw->pipe.delete_depth_stencil_alpha_state = brw_delete_depth_stencil_state; + + brw->pipe.create_rasterizer_state = brw_create_rasterizer_state; + brw->pipe.bind_rasterizer_state = brw_bind_rasterizer_state; + brw->pipe.delete_rasterizer_state = brw_delete_rasterizer_state; + brw->pipe.create_fs_state = brw_create_fs_state; + brw->pipe.bind_fs_state = brw_bind_fs_state; + brw->pipe.delete_fs_state = brw_delete_fs_state; + brw->pipe.create_vs_state = brw_create_vs_state; + brw->pipe.bind_vs_state = brw_bind_vs_state; + brw->pipe.delete_vs_state = brw_delete_vs_state; + + brw->pipe.set_blend_color = brw_set_blend_color; + brw->pipe.set_clip_state = brw_set_clip_state; + brw->pipe.set_constant_buffer = brw_set_constant_buffer; + brw->pipe.set_framebuffer_state = brw_set_framebuffer_state; + +// brw->pipe.set_feedback_state = brw_set_feedback_state; +// brw->pipe.set_feedback_buffer = brw_set_feedback_buffer; + + brw->pipe.set_polygon_stipple = brw_set_polygon_stipple; + brw->pipe.set_scissor_state = brw_set_scissor_state; + brw->pipe.set_sampler_textures = brw_set_sampler_textures; + brw->pipe.set_viewport_state = brw_set_viewport_state; + brw->pipe.set_vertex_buffers = brw_set_vertex_buffers; + brw->pipe.set_vertex_elements = brw_set_vertex_elements; +} -- cgit v1.2.3