aboutsummaryrefslogtreecommitdiffstats
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* v3d: Sync indirect draws on the last rendering.Eric Anholt2019-02-181-2/+2
| | | | | | Fixes intermittent fails in dEQP-GLES31.functional.draw_indirect.compute_interop.separate.drawelements_compute_cmd_and_data_and_indices and others (particularly when run as part of a CTS run)
* v3d: Clear the GMP on initialization of the simulator.Eric Anholt2019-02-181-0/+1
| | | | | | | Otherwise, we might have pages accessible that shouldn't be and miss out on errors. This is unlikely for most tests since v3d_hw_get_mem() is big enough that it'll be a freshly zeroed mmap, but if screens are destroyed and recreated then we'd be reusing the old v3d_hw_get_mem() contents.
* i965: always enable EXT_float_blendIlia Mirkin2019-02-181-0/+1
| | | | | | | | | From the table in isl_format.c, it appears that all generations support blending on 32-bit float surfaces. Signed-off-by: Ilia Mirkin <[email protected]> Reviewed-by: Tapani Pälli <[email protected]> Reviewed-by: Jason Ekstrand <[email protected]>
* st/mesa: enable GL_EXT_float_blend when possibleIlia Mirkin2019-02-181-0/+10
| | | | | | | | | If the driver supports PIPE_BIND_BLENABLE on RGBA32F, flip EXT_float_blend on (which will affect ES3 contexts). Signed-off-by: Ilia Mirkin <[email protected]> Reviewed-by: Jason Ekstrand <[email protected]> Reviewed-by: Erik Faye-Lund <[email protected]>
* mesa: add explicit enable for EXT_float_blend, and error conditionIlia Mirkin2019-02-184-1/+26
| | | | | | | | | If EXT_float_blend is not supported, error out on blending of FP32 attachments in an ES2 context. Signed-off-by: Ilia Mirkin <[email protected]> Reviewed-by: Tapani Pälli <[email protected]> Reviewed-by: Jason Ekstrand <[email protected]>
* radv: fix writing the alpha channel of MRT0 when alpha coverage is enabledSamuel Pitoiset2019-02-181-7/+8
| | | | | | | | This version is better and safer. Cc: 18.3 19.0 <[email protected]> Signed-off-by: Samuel Pitoiset <[email protected]> Reviewed-by: Bas Nieuwenhuizen <[email protected]>
* freedreno/ir3: handle quirky atomic dst for a6xxRob Clark2019-02-181-3/+12
| | | | | | | | | | | | | The new encoding returns a value via the 2nd src. The legalize pass needs to be aware of this to set the correct needs_sy flag, otherwise we can, in cases where the atomic dst is not used, overwrite the register that hardware will asynchronously load result into without (sy) flag, so it gets clobbered by the atomic result. This fixes a whole lot of rando ssbo+atomic fails, like dEQP-GLES31.functional.ssbo.layout.single_basic_type.packed.highp_vec4. Signed-off-by: Rob Clark <[email protected]>
* freedreno/a6xx: fix helper_invocation (sampler mask/id)Rob Clark2019-02-181-1/+6
| | | | | | | | | | | | | Since gl_HelperInvocation is lowered to: !((1 << sample_id) & sample_mask_in)) Not setting these enable bits was causing it be broken. (And probably a bunch of other stuff too.) Fixes dEQP-GLES31.functional.shaders.helper_invocation.* Signed-off-by: Rob Clark <[email protected]>
* radv: remove unused variable in gather_push_constant_info()Samuel Pitoiset2019-02-181-1/+0
| | | | | | Trivial. Signed-off-by: Samuel Pitoiset <[email protected]>
* i965: scale factor changes should trigger recompileLionel Landwerlin2019-02-182-1/+16
| | | | | | | | Found by inspection. Signed-off-by: Lionel Landwerlin <[email protected]> Fixes: 3da858a6b990c5 ("intel/compiler: add scale_factors to sampler_prog_key_data") Reviewed-by: Tapani Pälli <[email protected]>
* radv: write the alpha channel of MRT0 when alpha coverage is enabledSamuel Pitoiset2019-02-181-0/+8
| | | | | | | Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109597 Cc: 18.3 19.0 <[email protected]> Signed-off-by: Samuel Pitoiset <[email protected]> Reviewed-by: Bas Nieuwenhuizen <[email protected]>
* ac: use new LLVM 8 intrinsic when loading 16-bit valuesSamuel Pitoiset2019-02-181-14/+27
| | | | | Signed-off-by: Samuel Pitoiset <[email protected]> Reviewed-by: Bas Nieuwenhuizen <[email protected]>
* ac: add ac_build_llvm8_tbuffer_load() helperSamuel Pitoiset2019-02-182-0/+52
| | | | | | | It uses the new LLVM intrinsics. Signed-off-by: Samuel Pitoiset <[email protected]> Reviewed-by: Bas Nieuwenhuizen <[email protected]>
* mesa: return NULL if we exceed MaxColorAttachments in get_fb_attachmentTapani Pälli2019-02-181-2/+6
| | | | | | | | | | | | | | | This fixes invalid access to Attachment array which would occur if caller would exceed MaxColorAttachments. In practice this should not ever happen because DiscardFramebufferEXT specifies only GL_COLOR_ATTACHMENT0 to be valid and InvalidateFramebuffer will error out before but this should make coverity happy. v2: const, remove _EXT (Ian) CID: 1442559 Fixes: 0c42b5f3cb9 "mesa: wire up InvalidateFramebuffer" Signed-off-by: Tapani Pälli <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* panfrost: Fix clipping regionAlyssa Rosenzweig2019-02-181-4/+11
| | | | Signed-off-by: Alyssa Rosenzweig <[email protected]>
* panfrost: Preserve w sign in perspective divisionAlyssa Rosenzweig2019-02-181-2/+4
| | | | | | | This fixes issues where polygons that should be culled (due to negative w, for instance) may not be. Signed-off-by: Alyssa Rosenzweig <[email protected]>
* panfrost: Cleanup mali_viewport (clipping) codeAlyssa Rosenzweig2019-02-182-17/+19
| | | | Signed-off-by: Alyssa Rosenzweig <[email protected]>
* panfrost: Swap order of tiled texture (de)allocAlyssa Rosenzweig2019-02-181-6/+6
| | | | Signed-off-by: Alyssa Rosenzweig <[email protected]>
* panfrost: Free imported BOsAlyssa Rosenzweig2019-02-183-0/+12
| | | | Signed-off-by: Alyssa Rosenzweig <[email protected]>
* panfrost: Fix various leaks unmapping resourcesAlyssa Rosenzweig2019-02-182-9/+14
| | | | | | v2: Don't check for NULL before free() Signed-off-by: Alyssa Rosenzweig <[email protected]>
* nir: Don't reassociate add/mul chains containing only constantsKenneth Graunke2019-02-161-5/+5
| | | | | | | | | | | | | | | | | The idea here is to reassociate a * (b * c) into (a * c) * b, when b is a non-constant value, but a and c are constants, allowing them to be combined. But nothing was enforcing that 'b' must be non-constant, which meant that running opt_algebraic in a loop would never terminate if the IR contained non-folded constant expressions like 256 * 0.5 * 2. Normally, we call constant folding in such a loop too, but IMO it's better for nir_opt_algebraic to be robust and not rely on that. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109581 Fixes: 32e266a9a58 i965: Compile fp64 funcs only if we do not have 64-bit hardware support Reviewed-by: Ian Romanick <[email protected]>
* i965: Assert the execobject handles match for this deviceChris Wilson2019-02-161-0/+2
| | | | | | | Object handles are local to the device fd, so double check we are not mixing together objects from multiple screens on execbuf submission. Reviewed-by: Kenneth Graunke <[email protected]>
* freedreno/a6xx: cache flush harderRob Clark2019-02-165-7/+37
| | | | Signed-off-by: Rob Clark <[email protected]>
* freedreno/a6xx: compute supportRob Clark2019-02-168-40/+290
| | | | Signed-off-by: Rob Clark <[email protected]>
* freedreno/a6xx: image/ssbo state emitRob Clark2019-02-166-215/+259
| | | | Signed-off-by: Rob Clark <[email protected]>
* freedreno/a6xx: border-color offset helperRob Clark2019-02-162-13/+31
| | | | | | | Soon we'll need this logic to deal w/ image/SSBO case, so split out a helper rather than duplicate the logic. Signed-off-by: Rob Clark <[email protected]>
* freedreno/ir3: HIGH reg w/a for a6xxRob Clark2019-02-164-3/+26
| | | | | | | | | | | | | It seems like some instructions (noticed this w/ cat3), cannot read HIGH regs.. cat1 (mov/cov) can, and possibly some/all of cat2. The blob seems to stick w/ an extra mov into low regs. So lets do the same. This fixes WGID on a6xx, which unsurprisingly is related to a lot of deqp compute fails. Signed-off-by: Rob Clark <[email protected]>
* freedreno/ir3: add a6xx+ SSBO/image supportRob Clark2019-02-167-2/+484
| | | | Signed-off-by: Rob Clark <[email protected]>
* freedreno/ir3: add a6xx instruction encodingRob Clark2019-02-161-0/+90
| | | | | | For the handful of instructions that use a new encoding. Signed-off-by: Rob Clark <[email protected]>
* freedreno/ir3: add image/ssbo <-> ibo/tex mappingRob Clark2019-02-169-92/+173
| | | | | | | | | | Images and SSBOs don't map directly to the hw. They end up being part texture and part something else. Starting with a6xx, the hack used for a5xx to smash the image tex state into hw texture state starting from MAX counting down won't work, because we start using tex state also for SSBO read. Signed-off-by: Rob Clark <[email protected]>
* freedreno/ir3: fix ncomp for _store_image() srcRob Clark2019-02-161-2/+3
| | | | Signed-off-by: Rob Clark <[email protected]>
* freedreno/ir3: split out a4xx+ instructionsRob Clark2019-02-167-332/+394
| | | | | | | Note that image/ssbo support is currently only implemented for a5xx. But the instruction encoding is the same for a4xx. Signed-off-by: Rob Clark <[email protected]>
* freedreno/ir3: split out image helpersRob Clark2019-02-166-183/+253
| | | | Signed-off-by: Rob Clark <[email protected]>
* freedreno/a6xx: clean up some open-coded bitsRob Clark2019-02-161-2/+4
| | | | Signed-off-by: Rob Clark <[email protected]>
* freedreno/a6xx: move stream-out emit to helperRob Clark2019-02-161-64/+72
| | | | | | | Split out of the main fd6_emit() code, since it was already getting to be a pretty giant function. Signed-off-by: Rob Clark <[email protected]>
* freedreno/ir3: fix varying packing vs. tex sharp edgeRob Clark2019-02-161-2/+30
| | | | | | | | We probably need to rethink how we detect which instruction first defines higher register classes. But for now, this at least fixes the symptom. Signed-off-by: Rob Clark <[email protected]>
* radv: fix invalid element type when filling vertex input default valuesSamuel Pitoiset2019-02-161-1/+3
| | | | | | | | | | The elements added into a vector should have the same type as the first one, otherwise this hits an assertion in LLVM. Fixes: 4b3549c0846 ("radv: reduce the number of loaded channels for vertex input fetches") reported-by: Philip Rebohle <[email protected]> Signed-off-by: Samuel Pitoiset <[email protected]> Reviewed-by: Bas Nieuwenhuizen <[email protected]>
* i965: Removed the field etc_format from the struct intel_mipmap_treeEleni Maria Stea2019-02-153-18/+1
| | | | | | | | | After the previous changes to emulate the ETC/EAC formats using the secondary shadow miptree, the etc_format field of the intel_mipmap_tree struct became redundant and the remaining check that used it has been replaced. (Nanley Chery) Reviewed-by: Nanley Chery <[email protected]>
* i965: Enabled the OES_copy_image extension on Gen 7 GPUsEleni Maria Stea2019-02-151-4/+12
| | | | | | | | | | | OES_copy_image extension was disabled on Gen7 due to the lack of support for ETC2 images. Enabled it back. (Kenneth Graunke) v2: - Removed the blank lines in the comments above OES_copy_image and OES_texture_view extensions in intel_extensions.c (Nanley Chery) Reviewed-by: Nanley Chery <[email protected]>
* i965: Fixed the CopyImageSubData for ETC2 on Gen < 8Eleni Maria Stea2019-02-153-18/+6
| | | | | | | | | | | | | | | | | | | | | | For CopyImageSubData to copy the data during the 1st draw call, we need to update the shadow tree right before the rendering. v2: - Added assertion that the miptree doesn't need update at the time we update the texture surface. (Nanley Chery) v3: - As we now update the tree before the rendering we don't need to copy the data during the unmap anymore. Removed the unnecessary update from the intel_miptree_unmap in intel_mipmap_tree.c (Nanley Chery) v4: - Fixed unrelated empty line removal (Nanley Chery) - As now the intel_upate_etc_shadow of intel_mipmap_tree.c is only called inside its following function, we don't need to declare it at the top of the file anymore. (Nanley Chery) Reviewed-by: Nanley Chery <[email protected]>
* i965: Faking the ETC2 compression on Gen < 8 GPUs using two miptrees.Eleni Maria Stea2019-02-153-69/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPUs Gen < 8 cannot sample ETC2 formats. So far, they converted the compressed EAC/ETC2 images to non-compressed RGBA images. When GetCompressed* functions were called, the pixels were returned in this RGBA format and not the compressed format that was expected. Trying to fix this problem, we use a secondary shadow miptree to store the decompressed data for the rendering and the main miptree to store the compressed for the Get functions to work. Each time that the main miptree is written with compressed data, we decompress them to RGB and update the shadow. Then we use the shadow for rendering. v2: - Fixes in the commit message (Nanley Chery) - Reversed the changes in brw_get_texture_swizzle and swapped the b, g values at the time that we decompress the data in the function: intel_miptree_update_etc_shadow of intel_mipmap_tree.c (Nanley Chery) - Simplified the format checks in the miptree_create function of the intel_mipmap_tree.c and reserved the call of the intel_lower_compressed_format for the case that we are faking the ETC support (Nanley Chery) - Removed the check for the auxiliary usage for the shadow miptree at creation (miptree_create of intel_mipmap_tree.c) as we won't use auxiliary buffers with these types of trees (Nanley Chery) - Set the etc_format of the non-ETC miptrees to MESA_FORMAT_NONE and removed the unecessary checks (Nanley Chery) - Fixed an unrelated indentation change (Nanley Chery) - Modified the function intel_miptree_finish_write to set the mt->shadow_needs_update to true to catch all the cases when we need to update the miptree (Nanley Chery) - In order to update the shadow miptree during the unmap of the main and always map the main (Nanley Chery) the following change was necessary: Splitted the previous update function that was updating all the mipmap levels and use two functions instead: one that updates one level and one that updates all of them. Used the first during unmap and the second before the rendering. - Removed the BRW_MAP_ETC_BIT flag and the mechanism to decide which miptree should be mapped each time and reversed all the changes in the higher level texture functions that upload data to textures as they aren't needed anymore. - Replaced the boolean needs_fake_etc with an inline function that checks when we need to fake the ETC compression (Nanley Chery) - Removed the initialization of the strides in the update function as the values will be overwritten by the intel_miptree_map call (Nanley Chery) - Used minify instead of division in the new update function intel_miptree_update_etc_shadow_levels in intel_mipmap_tree.c (Nanley Chery) - Removed the depth from the calculation of the number of slices in the new update function (intel_miptree_update_etc_shadow_levels of intel_mipmap_tree.c) as we don't need to support 3D ETC images. (Nanley Chery) v3: - Renamed the rgba_fmt in function miptree_create (intel_mipmap_tree.c) to decomp_format as the format is not always in rgba order. (Nanley Chery) - Documented the new usage for the shadow miptree in the comment above the field in the intel_miptree struct in intel_mipmap_tree.h (Nanley Chery) - Removed the redundant flags from the mapping of the miptrees in intel_miptree_update_etc_shadow of intel_mipmap_tree.c (Nanley Chery) - Fixed the switch from surface's logical level to physical level in the intel_miptree_update_etc_shadow_levels of intel_mipmap_tree.c (Nanley Chery) - Excluded the Baytrail GPUs from the check for the ETC emulation as they support the ETC formats natively. (Nanley Chery) - Simplified the check if the format is BGRA in intel_miptree_update_etc_shadow of intel_mipmap_tree.c (Nanley Chery) v4: - Removed the functions intel_miptree_(map|unmap)_etc and the check if we need to call them as with the new changes, they became unreachable. (Nanley Chery) - We'd rather calculate the level width and height using the shadow miptree instead of the main in intel_miptree_update_etc_shadow_levels of intel_mipmap_tree.c (Nanley Chery) - Fixed the format in the mt_surface_usage, set at the miptree creation, in miptree_create of intel_mipmap_tree.c (Nanley Chery) v5: - Fixed the levels calculations in intel_mipmap_tree.c (Nanley Chery) - Update the flag shadow_needs_update outside the function intel_miptree_update_etc_shadow (Nanley Chery) - Fixed indentation error (Nanley Chery) v6: - Fixed typo in commit message (Nanley Chery) - Simplified the assignment of the mt_fmt in the miptree_create of the intel_mipmap_tree.c (Nanley Chery) - Combined declarations and assignments where it was possible in the intel_miptree_update_etc_shadow and intel_miptree_update_etc_shadow_levels of the intel_mipmap_tree.c (Nanley Chery) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81843 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104272 Reviewed-by: Nanley Chery <[email protected]>
* i965: Rename intel_mipmap_tree::r8stencil_* -> ::shadow_*Nanley Chery2019-02-153-19/+19
| | | | | | | Use more generic field names. We'll reuse these fields for a workaround with ASTC miptrees. Reviewed-by: Eleni Maria Stea <[email protected]>
* nir: remove simple dead if detection from nir_opt_dead_cf()Timothy Arceri2019-02-161-7/+2
| | | | | | | | | | | | | | | | | | This was probably useful when it was first written, however it looks to be no longer necessary. As far as I can tell these days dce is smart enough to remove useless instructions from if branches. Once this is done nir_opt_peephole_select() will end up removing the empty if. Removing this support reduces the dolphin uber shader compilation time spent in nir_opt_dead_cf() by a little over 7x. No shader-db changes on i965 or radeonsi. Tested-by: Dieter Nützel <[email protected]> Reviewed-by: Jason Ekstrand <[email protected]> Reviewed-by: Connor Abbott <[email protected]>
* swr/rast: Add translation support to streamoutAlok Hota2019-02-1512-37/+106
| | | | Reviewed-by: Bruce Cherniak <[email protected]>
* swr/rast: simdlib cleanup, clipper stack space fixesAlok Hota2019-02-1513-135/+127
| | | | | | | Reduce stack space used by clipper, which had lead to crashes in some versions for MSVC Reviewed-by: Bruce Cherniak <[email protected]>
* swr/rast: convert DWORD->uint32_t, QWORD->uint64_tAlok Hota2019-02-155-25/+25
| | | | Reviewed-by: Bruce Cherniak <[email protected]>
* swr/rast: Refactor scratch space variable namesAlok Hota2019-02-154-14/+14
| | | | Reviewed-by: Bruce Cherniak <[email protected]>
* swr/rast: FP consistency between POSH/RENDER pipesAlok Hota2019-02-154-11/+33
| | | | | | | | - Ensure all threads have optimal floating-point control state - Disable auto-generation of fused FP ops for VERTEX shader stage - Disable "fast" FP ops for VERTEX shader stage Reviewed-by: Bruce Cherniak <[email protected]>
* swr/rast: Move knob defaults to generated cpp fileAlok Hota2019-02-152-7/+14
| | | | | | Reduces amount of compile churn when testing different default values Reviewed-by: Bruce Cherniak <[email protected]>
* swr/rast: Flip BitScanReverse index calculationAlok Hota2019-02-151-2/+2
| | | | | | | The intrinsic returns the number of leading zeros, not the bit number of the first nonzero, so just flip it based on the mask size Reviewed-by: Bruce Cherniak <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 07:08:42 +0000