summaryrefslogtreecommitdiffstats
path: root/src/mesa/main/readpix.c
Commit message (Collapse)AuthorAgeFilesLines
* mesa: use sizeof on the correct typeThomas Hindoe Paaboel Andersen2016-02-231-1/+1
| | | | | | | | Before the luminance stride was based on the size of GL_FLOAT which is just the type constant (0x1406). Change it to use the size of GLfloat. Reviewed-by: Brian Paul <[email protected]>
* mesa/readpix: Dedent former _mesa_readpixels() if blockNanley Chery2016-02-091-29/+29
| | | | | | | | Formatting patch split out for easy reviewing. Signed-off-by: Nanley Chery <[email protected]> Reviewed-by: Ian Romanick <[email protected]> Reviewed-by: Brian Paul <[email protected]>
* mesa/readpix: Don't clip in _mesa_readpixels()Nanley Chery2016-02-091-13/+7
| | | | | | | | The clipping is performed higher up in the call-chain. Signed-off-by: Nanley Chery <[email protected]> Reviewed-by: Ian Romanick <[email protected]> Reviewed-by: Brian Paul <[email protected]>
* mesa/readpix: Clip ReadPixels() area to the ReadBuffer'sNanley Chery2016-02-091-2/+5
| | | | | | | | | | | | | | | | | | | The fast path for Intel's ReadPixels() unintentionally omits clipping the specified area to a valid one. Rather than clip in various corner-cases, perform this operation in the API validation stage. The bug in intel_readpixels_tiled_memcpy() showed itself when the winsys ReadBuffer's height was smaller than the one specified by ReadPixels(). yoffset became negative, which was an invalid input for tiled_to_linear(). v2: Move clipping to validation stage (Jason) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92193 Reported-by: Marta Löfstedt <[email protected]> Cc: "11.0 11.1" <[email protected]> Signed-off-by: Nanley Chery <[email protected]> Reviewed-by: Ian Romanick <[email protected]> Reviewed-by: Brian Paul <[email protected]>
* mesa: support GL_RED/GL_RG in ES2 contexts when driver support existsIlia Mirkin2015-11-281-1/+1
| | | | | | | Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93126 Signed-off-by: Ilia Mirkin <[email protected]> Reviewed-by: Eduardo Lima Mitev <[email protected]> Cc: "11.0 11.1" <[email protected]>
* mesa: fix errors when reading depth with glReadPixelsTapani Pälli2015-09-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | OpenGL ES 3.0 spec 3.7.2 "Transfer of Pixel Rectangles" specifies DEPTH_COMPONENT, UNSIGNED_INT as a valid couple, validation for internal format is checked by is_float_depth(). Fix regression caused by 81d2fd91a90e5b2fd9fd74792a7a7c329f0e4d29 in: ES3-CTS.gtf.GL3Tests.packed_pixels.packed_pixels Test uses GL_DEPTH_COMPONENT, UNSIGNED_INT only when GL_NV_read_depth extension is present. v2: change check in _mesa_error_check_format_and_type to be explicit for ES 2.0+, desktop OpenGL does not allow this behaviour + uses this function for both glReadPixels and glDrawPixels validation. (No Piglit regressions seen with v2.) Signed-off-by: Tapani Pälli <[email protected]> Reviewed-by: Anuj Phogat <[email protected]> Reviewed-by: Samuel Iglesias Gonsálvez <[email protected]> [v1] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92009 Cc: "10.6 11.0" <[email protected]>
* mesa/readpixels: check strides are equal before skipping conversionDave Airlie2015-09-021-1/+2
| | | | | | | | | | | | | The CTS packed_pixels test checks that readpixels doesn't write into the space between rows, however we fail that here unless we check the format and stride match. This fixes all the core mesa problems with CTS packed_pixels tests. Cc: "11.0" <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
* mesa: fix SwapBytes handling in numerous placesDave Airlie2015-09-021-9/+2
| | | | | | | | | | | | | | | | | | | In a number of places the SwapBytes handling didn't handle cases with GL_(UN)PACK_ALIGNMENT set and 7 byte width cases aligned to 8 bytes. This adds a common routine to swap bytes a 2D image and uses this code in: texture storage texture get readpixels swrast drawpixels. [airlied: updated with Brian's nitpicks]. Cc: "11.0" <[email protected]> Reviewed-by: Brian Paul <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
* mesa/formats: remove compressed formats from matching functionNanley Chery2015-08-251-1/+1
| | | | | | | | | | | | | | | All compressed formats return GL_FALSE and there isn't any evidence to support that this behaviour would change. Remove all switch cases for compressed formats. v2. Since the exhaustive switch is removed, add a gtest to ensure all formats are handled. v3. Ensure that GL_NO_ERROR is set before returning. v4. Fix an arg to _mesa_uncompressed_format_to_type_and_comps(); fix formatting and misc improvements (Chad). Reviewed-by: Chad Versace <[email protected]> Signed-off-by: Nanley Chery <[email protected]>
* mesa: add NV_read_{depth,stencil,depth_stencil} extensionsRob Clark2015-08-121-9/+39
| | | | | | | | These extensions allow reading depth/stencil for GLES contexts, which is useful for tools like apitrace. Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Marek Olšák <[email protected]>
* mesa: Avoid double promotion.Matt Turner2015-07-291-2/+2
| | | | Reviewed-by: Iago Toral Quiroga <[email protected]>
* mesa: Change the signature of _mesa_need_rgb_to_luminance_conversion()Anuj Phogat2015-07-241-13/+15
| | | | | | | | | This allows us to handle cases when texImage->_BaseFormat doesn't match _mesa_format_get_base_format(texImage->Format). _BaseFormat is what we care about in this function. Signed-off-by: Anuj Phogat <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]>
* mesa: Add a helper function _mesa_need_luminance_to_rgb_conversion()Anuj Phogat2015-07-241-0/+18
| | | | | | Cc: <[email protected]> Signed-off-by: Anuj Phogat <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]>
* mesa: Turn get_readpixels_transfer_ops() in to a global functionAnuj Phogat2015-07-241-7/+9
| | | | | | | | This utility function is utilized in a later patch. Cc: <[email protected]> Signed-off-by: Anuj Phogat <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]>
* mesa: Rename _mesa_lookup_enum_by_nr() to _mesa_enum_to_string().Kenneth Graunke2015-07-201-6/+6
| | | | | | | Generated by sed; no manual changes. Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Brian Paul <[email protected]>
* mesa: remove unnecessary checks in _mesa_readpixels_needs_slow_pathIago Toral Quiroga2015-06-261-16/+0
| | | | | | | | | | | | | | | | readpixels_can_use_memcpy will later call _mesa_format_matches_format_and_type which does much tighter checks than these to decide if we can use memcpy for readpixels. Also, the checks do not seem to be extensive enough anyway, since we are checking for signed/unsigned conversion only when the framebuffer has integers, but the same checks could be done for other types anyway, since as long as there is a signed/unsigned conversion we can't memcpy. No regressions observed on i965/llvmpipe. Reviewed-by: Anuj Phogat <[email protected]> Reviewed-by: Marek Olšák <[email protected]>
* mesa: Turn need_rgb_to_luminance_conversion() in to a global functionAnuj Phogat2015-06-151-5/+6
| | | | | | | | This will be used by _mesa_meta_pbo_GetTexSubImage() in a later patch. Signed-off-by: Anuj Phogat <[email protected]> Cc: <[email protected]> Reviewed-by: Tapani Pälli <[email protected]>
* mesa: Use helper function need_rgb_to_luminance_conversion()Anuj Phogat2015-06-151-7/+4
| | | | | | | Signed-off-by: Anuj Phogat <[email protected]> Cc: <[email protected]> Reviewed-by: Tapani Pälli <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]>
* mesa: Handle integer formats in need_rgb_to_luminance_conversion()Anuj Phogat2015-06-151-1/+4
| | | | | | | Signed-off-by: Anuj Phogat <[email protected]> Cc: <[email protected]> Reviewed-by: Tapani Pälli <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]>
* main: Refactor _mesa_get_clamp_read_color.Laura Ekstrand2015-05-141-2/+2
| | | | | | | | This wasn't neccessary for ARB_direct_state_access, but felt like a good idea for the sake of completeness. Reviewed-by: Fredrik Höglund <[email protected]> Signed-off-by: Fredrik Höglund <[email protected]>
* mesa: Free memory allocated for luminance in readpixels.Matt Turner2015-03-021-0/+1
| | | | | | Cc: "10.4, 10.5" <[email protected]> Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]>
* mesa: Use assert() instead of ASSERT wrapper.Matt Turner2015-02-231-6/+6
| | | | Acked-by: Eric Anholt <[email protected]>
* mesa: Fix element count for byte-swaps in texstore, readpix and texgetimageIago Toral Quiroga2015-02-161-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some old format conversion code in pack.c implemented byte-swapping like this: GLint comps = _mesa_components_in_format(dstFormat); GLint swapSize = _mesa_sizeof_packed_type(dstType); if (swapSize == 2) _mesa_swap2((GLushort *) dstAddr, n * comps); else if (swapSize == 4) _mesa_swap4((GLuint *) dstAddr, n * comps); where n is the pixel count. But this is incorrect for packed formats, where _mesa_sizeof_packed_type is already returning the size of a pixel instead of the size of a single component, so multiplying this by the number of components in the format results in a larger element count for _mesa_swap than we want. Unfortunately, we followed the same implementation for byte-swapping in the rewrite of the format conversion code for texstore, readpixels and texgetimage. This patch computes the correct element counts for _mesa_swap calls by computing the bytes per pixel in the image and dividing that by the swap size to obtain the number of swaps required per pixel. Then multiplies that by the number of pixels in the image to obtain the swap count that we need to use. Also, when handling byte-swapping in texstore_rgba, we were ignoring the image's depth. This patch fixes this too. Reviewed-by: Jason Ekstrand <[email protected]> Cc: "10.5" <[email protected]>
* mesa: rename RGBA8888_* format constants to something appropriate.Iago Toral Quiroga2015-01-141-3/+3
| | | | | | | | The 8888 suggests 8-bit components which is not correct, so replace that with the actual size of the components in each format. Reviewed-by: Jason Ekstrand <[email protected]>
* mesa: use _mesa_format_convert to implement glReadPixels.Iago Toral Quiroga2015-01-121-142/+184
| | | | Reviewed-by: Jason Ekstrand <[email protected]>
* mesa: allow buffers mapped with the persistent flag to be used by the GPUMarek Olšák2014-02-251-1/+1
| | | | | | v2: also fixed InvalidateBufferData, added citations from the 4.4 spec Reviewed-by: Fredrik Höglund <[email protected]>
* mesa: Fix MESA_FORMAT_Z24_UNORM_S8_UINT vs. X8_UINT mix-up.Kenneth Graunke2014-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | In commit eeed49f5f290793870c60b5b635b977a732a1eb4, Mark accidentally renamed MESA_FORMAT_S8_Z24 to MESA_FORMAT_Z24_UNORM_X8_UINT and MESA_FORMAT_X8_Z24 to MESA_FORMAT_Z24_UNORM_S8_UINT, reversing their sense. The commit message was correct, but what sed commands actually got run didn't match that. This patch swaps the two enum names, reversing them. This should undo the damage, but might break things if people have manually fixed a few instances in the meantime... Mark's commit also failed to mention renames: s/MESA_FORMAT_ARGB2101010_UINT\b/MESA_FORMAT_B10G10R10A2_UINT/g s/MESA_FORMAT_ABGR2101010\b/MESA_FORMAT_R10G10B10A2_UNORM/g but those seem okay. Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Marek Olšák <[email protected]>
* mesa: Change many Type P MESA_FORMATs to meet naming specMark Mueller2014-01-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conversion of Type P formats as follows (w/related comment fixes): s/MESA_FORMAT_RGB565\b/MESA_FORMAT_B5G6R5_UNORM/g s/MESA_FORMAT_RGB565_REV\b/MESA_FORMAT_R5G6B5_UNORM/g s/MESA_FORMAT_ARGB4444\b/MESA_FORMAT_B4G4R4A4_UNORM/g s/MESA_FORMAT_ARGB4444_REV\b/MESA_FORMAT_A4R4G4B4_UNORM/g s/MESA_FORMAT_RGBA5551\b/MESA_FORMAT_A1B5G5R5_UNORM/g s/MESA_FORMAT_XBGR8888_SNORM\b/MESA_FORMAT_R8G8B8X8_SNORM/g s/MESA_FORMAT_XBGR8888_SRGB\b/MESA_FORMAT_R8G8B8X8_SRGB/g s/MESA_FORMAT_ARGB1555\b/MESA_FORMAT_B5G5R5A1_UNORM/g s/MESA_FORMAT_ARGB1555_REV\b/MESA_FORMAT_A1R5G5B5_UNORM/g s/MESA_FORMAT_AL44\b/MESA_FORMAT_L4A4_UNORM/g s/MESA_FORMAT_RGB332\b/MESA_FORMAT_B2G3R3_UNORM/g s/MESA_FORMAT_ARGB2101010\b/MESA_FORMAT_B10G10R10A2_UNORM/g s/MESA_FORMAT_Z24_S8\b/MESA_FORMAT_S8_UINT_Z24_UNORM/g s/MESA_FORMAT_S8_Z24\b/MESA_FORMAT_Z24_UNORM_S8_UINT/g s/MESA_FORMAT_X8_Z24\b/MESA_FORMAT_Z24_UNORM_X8_UINT/g s/MESA_FORMAT_Z24_X8\b/MESA_FORMAT_X8Z24_UNORM/g s/MESA_FORMAT_RGB9_E5_FLOAT\b/MESA_FORMAT_R9G9B9E5_FLOAT/g s/MESA_FORMAT_R11_G11_B10_FLOAT\b/MESA_FORMAT_R11G11B10_FLOAT/g s/MESA_FORMAT_Z32_FLOAT_X24S8\b/MESA_FORMAT_Z32_FLOAT_S8X24_UINT/g s/MESA_FORMAT_ABGR2101010_UINT\b/MESA_FORMAT_R10G10B10A2_UINT/g s/MESA_FORMAT_XRGB4444_UNORM\b/MESA_FORMAT_B4G4R4X4_UNORM/g s/MESA_FORMAT_XRGB1555_UNORM\b/MESA_FORMAT_B5G5R5X1_UNORM/g s/MESA_FORMAT_XRGB2101010_UNORM\b/MESA_FORMAT_B10G10R10X2_UNORM/g s/MESA_FORMAT_AL88\b/MESA_FORMAT_L8A8_UNORM/g s/MESA_FORMAT_AL88_REV\b/MESA_FORMAT_A8L8_UNORM/g s/MESA_FORMAT_AL1616\b/MESA_FORMAT_L16A16_UNORM/g s/MESA_FORMAT_AL1616_REV\b/MESA_FORMAT_A16L16_UNORM/g s/MESA_FORMAT_RG88\b/MESA_FORMAT_G8R8_UNORM/g s/MESA_FORMAT_GR88\b/MESA_FORMAT_R8G8_UNORM/g s/MESA_FORMAT_GR1616\b/MESA_FORMAT_R16G16_UNORM/g s/MESA_FORMAT_RG1616\b/MESA_FORMAT_G16R16_UNORM/g s/MESA_FORMAT_SRGBA8\b/MESA_FORMAT_A8B8G8R8_SRGB/g s/MESA_FORMAT_SARGB8\b/MESA_FORMAT_B8G8R8A8_SRGB/g s/MESA_FORMAT_SLA8\b/MESA_FORMAT_L8A8_SRGB/g Conflicts: src/mesa/drivers/dri/i965/brw_surface_formats.c src/mesa/main/format_pack.c src/mesa/main/format_unpack.c src/mesa/main/formats.c src/mesa/main/texformat.c src/mesa/main/texstore.c
* mesa: Rename 4 color component unsigned byte MESA_FORMATsMark Mueller2014-01-271-2/+2
| | | | | | | | | | | | | Change all 4 color component unsigned byte formats to meet spec for P Type formats: s/MESA_FORMAT_RGBA8888\b/MESA_FORMAT_A8B8G8R8_UNORM/g s/MESA_FORMAT_RGBA8888_REV\b/MESA_FORMAT_R8G8B8A8_UNORM/g s/MESA_FORMAT_ARGB8888\b/MESA_FORMAT_B8G8R8A8_UNORM/g s/MESA_FORMAT_ARGB8888_REV\b/MESA_FORMAT_A8R8G8B8_UNORM/g s/MESA_FORMAT_RGBX8888\b/MESA_FORMAT_X8B8G8R8_UNORM/g s/MESA_FORMAT_RGBX8888_REV\b/MESA_FORMAT_R8G8B8X8_UNORM/g s/MESA_FORMAT_XRGB8888\b/MESA_FORMAT_B8G8R8X8_UNORM/g s/MESA_FORMAT_XRGB8888_REV\b/MESA_FORMAT_X8R8G8B8_UNORM/g
* mesa: change gl_format to mesa_formatMark Mueller2014-01-271-3/+3
| | | | s/\bgl_format\b/mesa_format/g. Use better name for Mesa Formats enum
* mesa: remove outdated version lines in commentsRico Schüller2013-06-051-1/+0
| | | | Signed-off-by: Brian Paul <[email protected]>
* mesa: Restore 78-column wrapping of license text in C-style comments.Kenneth Graunke2013-04-231-3/+4
| | | | | | | | | | | | | | The previous commit introduced extra words, breaking the formatting. This text transformation was done automatically via the following shell command: $ git grep 'THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY' | sed 's/:.*$//' | xargs -I {} sh -c 'vim -e -s {} < vimscript where 'vimscript' is a file containing: /THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY/;/\*\// !fmt -w 78 -p ' * ' :wq Reviewed-by: Brian Paul <[email protected]>
* mesa: Add "OR COPYRIGHT HOLDERS" to license text disclaiming liability.Kenneth Graunke2013-04-231-1/+1
| | | | | | | | | | | | | | | This brings the license text in line with the MIT License as published on the Open Source Initiative website: http://opensource.org/licenses/mit-license.php Generated automatically be the following shell command: $ git grep 'THE AUTHORS BE LIABLE' | sed 's/:.*$//g' | xargs -I '{}' \ sed -i 's/THE AUTHORS/THE AUTHORS OR COPYRIGHT HOLDERS/' {} This introduces some wrapping issues, to be fixed in the next commit. Reviewed-by: Brian Paul <[email protected]>
* mesa: Change "BRIAN PAUL" to "THE AUTHORS" in license text.Kenneth Graunke2013-04-231-1/+1
| | | | | | | | | | | | | | | | Generated automatically be the following shell command: $ git grep 'BRIAN PAUL BE LIABLE' | sed 's/:.*$//g' | xargs -I '{}' \ sed -i 's/BRIAN PAUL/THE AUTHORS/' {} The intention here is to protect all authors, not just Brian Paul. I believe that was already the sensible interpretation, but spelling it out is probably better. More practically, it also prevents people from accidentally copy & pasting the license into a new file which says Brian is not liable when he isn't even one of the authors. Reviewed-by: Brian Paul <[email protected]>
* mesa: refactor clamping controls, get rid of _ClampReadColorMarek Olšák2013-04-061-2/+3
| | | | | | v2: cosmetic changes from Brian's email Reviewed-by: Brian Paul <[email protected]>
* mesa: add common format-independent memcpy-based ReadPixels pathMarek Olšák2013-03-231-34/+160
| | | | | | | | | | | I'll need the _mesa_readpixels_needs_slow_path function for the blit-based version, but it's also useful to have this memcpy-based path in one place and not scattered across several functions. v2: add "const" to function parameters Reviewed-by: Brian Paul <[email protected]> Tested-by: Brian Paul <[email protected]>
* mesa: add a common function returning transfer ops for ReadPixelsMarek Olšák2013-03-231-20/+74
| | | | | | | | | | | I'll need both new functions for later. For now, it consolidates the code for determining what the transfer ops should be and makes it a little bit smarter. v2: added "const" Reviewed-by: Brian Paul <[email protected]> Tested-by: Brian Paul <[email protected]>
* mesa: Drop manual checks for outside begin/end.Eric Anholt2013-01-211-1/+1
| | | | | | | | | | | We now have a separate dispatch table for begin/end that prevent these functions from being entered during that time. The ASSERT_OUTSIDE_BEGIN_END_WITH_RETVALs are left because I don't want to change any return values or introduce new error-only stubs at this point. Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* readpix: allow implementation format/typeJordan Justen2013-01-201-1/+6
| | | | | | | | | For GLES2/3 allow reading of pixels with format/type based on: * GL_IMPLEMENTATION_COLOR_READ_FORMAT * GL_IMPLEMENTATION_COLOR_READ_TYPE Reviewed-by: Ian Romanick <[email protected]> Signed-off-by: Jordan Justen <[email protected]>
* extensions: enable EXT_color_buffer_float for ES3Jordan Justen2013-01-201-0/+2
| | | | | | | | | [mattst88] v2: Enable only for ES3 per spec. [mattst88] v3: Use _mesa_is_gles3 since EXT_color_buffer_float is ES3-only. Reviewed-by: Ian Romanick <[email protected]> Signed-off-by: Jordan Justen <[email protected]>
* readpix: check FBO completeness before trying to access the read-bufferJordan Justen2013-01-201-9/+9
| | | | | Reviewed-by: Ian Romanick <[email protected]> Signed-off-by: Jordan Justen <[email protected]>
* readpix: add error checking for GLES3Jordan Justen2013-01-201-0/+56
| | | | | Reviewed-by: Ian Romanick <[email protected]> Signed-off-by: Jordan Justen <[email protected]>
* mesa: Return INVALID_ENUM for glReadPixels(..., GL_DEPTH_*, ...) on ES 3Matt Turner2013-01-151-9/+13
| | | | | | | | | | | | | I'm not sure if this is the correct fix. The _mesa_es_error_check_format_and_type function (used above in the ES 1 and 2 cases) was originally added for glTexImage checking and allows GL_DEPTH_STENCIL/GL_UNSIGNED_INT_24_8 combinations. Using it in ES 3 causes other tests to regress. Fixes es3conform's packed_depth_stencil_error test. Reviewed-by: Kenneth Graunke <[email protected]> (v1) Reviewed-by: Anuj Phogat <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* mesa: Fix segfault on reading from a missing color read buffer.Eric Anholt2012-11-171-11/+11
| | | | | | | | | | | | | | The diff looks funny, but it's moving the integer vs non-integer check below the _mesa_source_buffer_exists() check that ensures _ColorReadBuffer is non-null, so we get a GL_INVALID_OPERATION instead of a segfault. This looks like it had regressed in the _mesa_error_check_format_and_type() changes, which removed the first of the two duplicated checks for the source buffer. Fixes segfault in the new piglit ARB_framebuffer_object/negative-readpixels-no-rb. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45877 NOTE: This is a candidate for the stable branches. Reviewed-by: Brian Paul <[email protected]>
* mesa: move _mesa_es_error_check_format_and_type() to glformats.cBrian Paul2012-09-261-1/+0
| | | | | | Where the non-ES _mesa_error_check_format_and_type() function lives. Reviewed-by: Kenneth Graunke <[email protected]>
* mesa: move GL_HALF_FLOAT_OES definition to glheader.hBrian Paul2012-09-261-5/+0
| | | | Reviewed-by: Kenneth Graunke <[email protected]>
* Don't cast the return value of malloc/reallocMatt Turner2012-09-051-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch has been generated by the following Coccinelle semantic patch: // Don't cast the return value of malloc/realloc. // // Casting the return value of malloc/realloc only stands to hide // errors. @@ type T; expression E1, E2; @@ - (T) ( _mesa_align_calloc(E1, E2) | _mesa_align_malloc(E1, E2) | calloc(E1, E2) | malloc(E1) | realloc(E1, E2) )
* mesa/es: Validate glReadPixels format and type in Mesa code rather than the ↵Ian Romanick2012-08-291-0/+33
| | | | | | | | ES wrapper v2: Add proper GLES3 filtering. Signed-off-by: Ian Romanick <[email protected]>
* mesa ReadPixels: handle signed/unsigned integer clampingJordan Justen2012-08-141-3/+10
| | | | | Signed-off-by: Jordan Justen <[email protected]> Reviewed-by: Brian Paul <[email protected]>
* mesa pack: handle uint and int clamping properlyJordan Justen2012-08-141-2/+2
| | | | | | | | | | | Rename _mesa_pack_rgba_span_int to _mesa_pack_rgba_span_from_uints. Add _mesa_pack_rgba_span_from_ints. These separate routines allow the integer clamping to be handled properly for signed versus unsigned integers. Signed-off-by: Jordan Justen <[email protected]> Reviewed-by: Brian Paul <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 08:39:22 +0000