summaryrefslogtreecommitdiffstats
path: root/src/loader
Commit message (Collapse)AuthorAgeFilesLines
* loader: use drmGetDevice[s]2 APIEmil Velikov2017-03-151-3/+3
| | | | | | | | | | | | By this allows us to fetch the device list/info w/o the revision field. At the moment retrieving the latter wakes up the device. Note: kernel patch to resolve that should be in 4.10. Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> Reviewed-by: Eric Engestrom <[email protected]> Tested-by: Mike Lothian <[email protected]>
* loader: Move non-error message to debug levelFabio Estevam2017-03-081-1/+1
| | | | | | | | | | | | | | | | | Currently when running mesa on imx6 the following loader warnings are seen: # kmscube -D /dev/dri/card1 MESA-LOADER: device is not located on the PCI bus MESA-LOADER: device is not located on the PCI bus MESA-LOADER: device is not located on the PCI bus Using display 0x1920948 with EGL version 1.4 As this is not an error message, change it to debug level in order to have a cleaner log output. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Emil Velikov <[email protected]>
* egl/dri3: implement query surface hookBrendan King2017-02-282-0/+25
| | | | | | | | | | | | | | This is a DRI3 version of a change made for DRI2 (4d6d4f939e0af4252e0b, "egl/dri2: implement query surface hook"), that fixed failures in dEQP-EGL.functional.resize.surface_size.grow and dEQP-EGL.functional.resize.surface_size.shrink. Cc: Tapani Pälli <[email protected]> Cc: Mark Janes <[email protected]> Cc: Chad Versace <[email protected]> Signed-off-by: Brendan King <[email protected]> Reviewed-by: Tapani Pälli <[email protected]> Cc: "17.0" <[email protected]>
* loader: unconditionally include unistd.h and stdlib.hNicolai Hähnle2017-02-101-2/+2
| | | | | | | | | | | | | | | | | Otherwise we would fail with "implicit declaration of function" geteuid and getenv respectively. To trigger (re)move the libdrm.pc file and use the following: $ ./autogen.sh --disable-egl --disable-gbm --disable-dri \ --with-dri-drivers=swrast --with-gallium-drivers=swrast $ make Cc: Vinson Lee <[email protected]> Fixes: 3f462050c ("loader: Add an environment variable to override driver name choice. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99701 v2: [Emil: handle stdlib.h add commit message] Signed-off-by: Emil Velikov <[email protected]>
* loader: Add an environment variable to override driver name choice.Eric Anholt2017-02-061-0/+11
| | | | | | | | | | My vc4 simulator has been implemented so far by having an entrypoint claiming to be i965, which was a bit gross. The simulator would be a lot less special if we entered through the vc4 entrypoint like normal, so add a loader environment variable to allow the i965 fd to probe as vc4. Reviewed-by: Emil Velikov <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* loader: automake: include builddir prior to srcdirEmil Velikov2017-01-271-1/+1
| | | | | | | Analogous to previous commit. Cc: "12.0 13.0" <[email protected]> Signed-off-by: Emil Velikov <[email protected]>
* loader/dri3: Unify the style of function pointer calls in structsBoyan Ding2017-01-131-39/+39
| | | | Signed-off-by: Boyan Ding <[email protected]>
* loader: automake: whitespace cleanupEmil Velikov2016-11-211-1/+1
| | | | | Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Eduardo Lima Mitev <[email protected]>
* loader: fixup driver names if neededChristian Gmeiner2016-11-151-0/+6
| | | | | | | | | | | | This makes it possible to 'use' the imx-drm driver. Remeber that it is not possible to have sysmbol names in C/C++ with a '-' in it. Changes since v1: - move the fix to loader.c Signed-off-by: Christian Gmeiner <[email protected]> Reviewed-by: Eric Engestrom <[email protected]> (v1) Reviewed-by: Emil Velikov <[email protected]>
* loader: add loader_get_extensions_name(..) helperChristian Gmeiner2016-11-152-0/+21
| | | | | | | | | | | | | Changes since v1: - renamed function to loader_get_extensions_name - moved function into loader Signed-off-by: Christian Gmeiner <[email protected]> V2: [Emil Velikov] - Use local define. Signed-off-by: Emil Velikov <[email protected]>
* loader: cleanup copyright sectionEmil Velikov2016-10-181-40/+2
| | | | | | | | | | | With previous patches nearly all the original code (as seen in the various loaders) is gone. Update the copyright/license section to reflect that. Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* loader: remove loader_get_driver_for_fd() driver_typeEmil Velikov2016-10-183-23/+13
| | | | | | | | | | | | | | Reminiscent from the pre-loader days, were we had multiple instances of the loader logic in separate places and one could build a "GALLIUM_ONLY" version. Since that is no longer the case and the loaders (glx/egl/gbm) do not (and should not) require to know any classic/gallium specific we can drop the argument and the related code. Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* loader: remove final sysfs codepath in loader_get_device_name_for_fd()Emil Velikov2016-10-181-46/+1
| | | | | | | | | | | | | | Effectively everyone with actual hardware and/or requesting the "device_name" requires a working libdrm. Thus they could/should already be using the (now only) codepath. Apart from the code simplification, we can slim down our configure.ac even further. But that will be done in separate patch(es). Cc: Gary Wong <[email protected]> Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* scons: remove all libudev referencesEmil Velikov2016-10-181-4/+0
| | | | | | | | Analogous to previous automake/autoconf commit. Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* scons: loader: use libdrm when availableEmil Velikov2016-10-181-0/+4
| | | | | | Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* automake: remove all the libudev referencesEmil Velikov2016-10-181-2/+1
| | | | | | | | As of last commit nothing in mesa depends on libudev. Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* loader: remove libudev_get_device_name_for_fd and related codeEmil Velikov2016-10-181-126/+0
| | | | | | | | With this all the libudev related code is now gone. Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* loader: reimplement loader_get_user_preferred_fd via libdrmEmil Velikov2016-10-181-141/+106
| | | | | | | | | | | | | | | | Currently not everyone has libudev and with follow-up patches we'll completely remove the divergent codepaths. Use the libdrm drm device API to construct the required ID_PATH_TAG-like string, to preserve the current functionality for libudev users and allow others to benefit from it as well. v2: Drop ranty comments, pick the correct device v3: \n -> \0 in PCI_ID_PATH_TAG_LENGTH comment (Axel). v4: Use snprintf (Nicolai) Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]>
* loader: annotate __driConfigOptionsLoader as staticEmil Velikov2016-10-181-1/+1
| | | | | | Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* loader: separate USE_DRICONF code into separate functionEmil Velikov2016-10-181-12/+18
| | | | | | | | Improves readability and allows us to do further cleanups a lot easier. Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* loader: slim down loader_get_pci_id_for_fd implementation(s)Emil Velikov2016-10-181-156/+16
| | | | | | | | | | | | | | | | Currently mesa has three code paths in the loader - libudev, manual sysfs and drm ioctl one. Considering the issues we had with libudev - strip those down in favour of the libdrm drm device API. The latter can be implemented in any way depending on the platform and can be reused by others. v2: Use correct message on drmGetDevice failure. (Nicolai) Cc: Jonathan Gray <[email protected]> Cc: Jean-Sébastien Pédron <[email protected]> Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Axel Davy <[email protected]>
* loader/dri3: constify the loader_dri3_vtableEmil Velikov2016-10-142-3/+3
| | | | | Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Eric Engestrom <[email protected]>
* loader/dri3: import prime buffers in the currently-bound screenMartin Peres2016-10-071-1/+11
| | | | | | | | | | | | | | | | | | This tries to mirrors the codepath taken by DRI2 in IntelSetTexBuffer2() and fixes many applications when using DRI3: - Totem with libva on hw-accelerated decoding - obs-studio, using Window Capture (Xcomposite) as a Source - gstreamer with VAAPI v2: - introduce get_dri_screen() in the dri3 loader's vtable (krh) Tested-by: Timo Aaltonen <[email protected]> Tested-by: Ionut Biru <[email protected]> Cc: [email protected] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71759 Reviewed-by: Emil Velikov <[email protected]> Signed-off-by: Martin Peres <[email protected]>
* loader/dri3: add get_dri_screen() to the vtableMartin Peres2016-10-071-0/+1
| | | | | | | | | This allows querying the current active screen from the loader's common code. Cc: [email protected] Reviewed-by: Emil Velikov <[email protected]> Signed-off-by: Martin Peres <[email protected]>
* loader/dri3: Always use at least two back buffersMichel Dänzer2016-09-061-3/+1
| | | | | | | | | | | This can make a significant difference for performance with some extreme test cases such as vblank_mode=0 glxgears. Fixes: 1e3218bc5ba2 ("loader/dri3: Overhaul dri3_update_num_back") Cc: "12.0 11.2" <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97549 Reviewed-by: Jason Ekstrand <[email protected]> Tested-by: Dieter Nützel <[email protected]>
* loader: fix sysfs uevent file parsingFrank Binns2016-09-011-2/+4
| | | | | | | | | | When trying to get a device name for an fd using sysfs, it would always fail as it was expecting key/value pairs to be delimited by '\0', which is not the case. Signed-off-by: Frank Binns <[email protected]> Reviewed-by: Eric Engestrom <[email protected]> Reviewed-by: Emil Velikov <[email protected]>
* nouveau: allow NV3x's to be used with nouveau_vieuxIlia Mirkin2016-08-301-1/+3
| | | | | | | | | NV34 and possibly other NV3x hardware has the capability of exposing the NV25 graph class. This allows forcing nouveau_vieux to be used instead of the gallium driver, primarily for testing purposes. (Among other things, NV2x only ever came as AGP or inside an Xbox, never PCI/PCIe). Signed-off-by: Ilia Mirkin <[email protected]>
* loader/dri3: Overhaul dri3_update_num_backMichel Dänzer2016-08-251-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | Always use 3 buffers when flipping. With only 2 buffers, we have to wait for a flip to complete (which takes non-0 time even with asynchronous flips) before we can start working on the next frame. We were previously only using 2 buffers for flipping if the X server supports asynchronous flips, even when we're not using asynchronous flips. This could result in bad performance (the referenced bug report is an extreme case, where the inter-frame stalls were preventing the GPU from reaching its maximum clocks). I couldn't measure any performance boost using 4 buffers with flipping. Performance actually seemed to go down slightly, but that might have been just noise. Without flipping, a single back buffer is enough for swap interval 0, but we need to use 2 back buffers when the swap interval is non-0, otherwise we have to wait for the swap interval to pass before we can start working on the next frame. This condition was previously reversed. Cc: "12.0 11.2" <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97260 Reviewed-by: Frank Binns <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* loader/dri3: Destroy Present event context when destroying drawable v2Michel Dänzer2016-08-041-1/+7
| | | | | | | | | | | Without this, the X server may accumulate stale Present event contexts if a client ends up creating and destroying DRI drawables for the same window. v2: Based on Chris Wilson's review: * Use xcb_present_select_input_checked so that protocol errors generated by old X servers can be handled gracefully * Use xcb_discard_reply() instead of free(xcb_request_check())
* loader: fix memory leak in loader_dri3_openJan Ziak2016-08-031-0/+1
| | | | | | | | | Found via "valgrind --leak-check=full glxgears". Signed-off-by: Jan Ziak (http://atom-symbol.net) <[email protected]> Acked-by: Boyan Ding <[email protected]> Cc: "12.0 11.2" <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* mesa: Use AC_HEADER_MAJOR to include correct header for major().Matt Turner2016-07-261-2/+5
| | | | | | Gentoo has been smoke testing an upcoming change to glibc. Bugzilla: https://bugs.gentoo.org/show_bug.cgi?id=580392
* Android: move libdrm settings to top-level Android.common.mkRob Herring2016-06-131-5/+0
| | | | | | | | | | | | | | Fix warnings like these due to HAVE_LIBDRM being inconsistently defined: external/libdrm/include/drm/drm.h:839:30: warning: redefinition of typedef 'drm_clip_rect_t' is a C11 feature [-Wtypedef-redefinition] typedef struct drm_clip_rect drm_clip_rect_t; HAVE_LIBDRM needs to be set project wide to fix this. This change also harmlessly links libdrm with everything, but simplifies the makefiles a bit. Signed-off-by: Rob Herring <[email protected]> Acked-by: Emil Velikov <[email protected]>
* loader: add a libdrm case for loader_get_device_name_for_fdJonathan Gray2016-04-211-1/+25
| | | | | | | | | Use dev_node_from_fd() with HAVE_LIBDRM to provide an implmentation of loader_get_device_name_for_fd() for non-linux systems that use libdrm but don't have udev or sysfs. Signed-off-by: Jonathan Gray <[email protected]> Reviewed-by: Emil Velikov <[email protected]>
* dri: add backbuffer use flagAxel Davy2016-03-091-2/+4
| | | | | | This will be used by the next commit. Reviewed-by: Ian Romanick <[email protected]>
* virtio_gpu: Add PCI ID to driver mapRob Herring2016-01-231-0/+7
| | | | | | | Add the virtio-gpu PCI ID so the driver probing works. Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
* loader: unconditionally add AM_CPPFLAGS to libloader_la_CPPFLAGSEmil Velikov2015-11-231-2/+2
| | | | | | | | | | | | | It seems that due to the conditional autotools is getting confused and forgetting to add AM_CPPFLAGS when building libloader (when HAVE_DRICOMMON is not set). Cc: [email protected] Fixes: 5a79e0a8e37 "automake: loader: rework the CPPFLAGS" Reported-by: Pali Rohár <[email protected]> Tested-by: Pali Rohár <[email protected]> Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Matt Turner <[email protected]>
* automake: loader: don't create an empty dri3 helperEmil Velikov2015-11-201-1/+3
| | | | | | | | | | | | | Seems that creating an empty one does not fair too well with MacOSX's ar. Considering that all the users of the helper include it only when needed, let's reshuffle the makefile. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92985 Signed-off-by: Emil Velikov <[email protected]> Tested-by: Vinson Lee <[email protected]> Tested-by: Kai Wasserbäch <[email protected]> Reviewed-by: Kristian Høgsberg <[email protected]> Reviewed-by: Matt Turner <[email protected]>
* automake: loader: honour the XCB_DRI3 cflagsEmil Velikov2015-11-201-0/+1
| | | | | | | | | | Without this the compilation will fail, as the headers are installed in a non-default location. Signed-off-by: Emil Velikov <[email protected]> Tested-by: Kai Wasserbäch <[email protected]> Reviewed-by: Kristian Høgsberg <[email protected]> Reviewed-by: Matt Turner <[email protected]>
* automake: loader: rework the CPPFLAGSEmil Velikov2015-11-201-11/+4
| | | | | | | | | | | | | Rather than duplicating things, just use the generic AM_CPPFLAGS. This has the fortunate side-effect of adding VISIBILITY_CFLAGS for the dri3 helper. The latter of which was erroneously exposing some internal symbols. Signed-off-by: Emil Velikov <[email protected]> Reported-by: Kai Wasserbäch <[email protected]> Tested-by: Kai Wasserbäch <[email protected]> Reviewed-by: Kristian Høgsberg <[email protected]> Reviewed-by: Matt Turner <[email protected]>
* loader/dri3: Expose function to create __DRIimage from pixmapBoyan Ding2015-11-172-29/+58
| | | | | | | | | Used to support EGL_KHR_image_pixmap. Signed-off-by: Boyan Ding <[email protected]> Reviewed-by: Martin Peres <[email protected]> Reviewed-by: Kristian Høgsberg <[email protected]> Reviewed-by: Emil Velikov <[email protected]>
* loader: Add dri3 helperBoyan Ding2015-11-173-1/+1622
| | | | | | | | | | | | | | | | | v2: From Martin Peres - Try to fit in the 80-col limit as much as possible v3: From Martin Peres - introduce loader_dri3_helper.la to avoid dragging the xcb dep everywhere (Kristian & Emil) - get rid of the width, height, dri_screen and is_different_gpu vfuncs (Kristian) - replace the create/destroy functions with init/fini for dri3 drawables - prefix static functions with dri3_ and exported ones with loader_dri3 (Emil) - keep the function definition consistent (Emil) Signed-off-by: Boyan Ding <[email protected]> Signed-off-by: Martin Peres <[email protected]> Reviewed-by: Kristian Høgsberg <[email protected]> Reviewed-by: Emil Velikov <[email protected]>
* loader: use HAVE_LIBDRM instead of ! __NOT_HAVE_DRM_HEmil Velikov2015-07-225-15/+8
| | | | | | | | Double negatives in English language are normally avoided, plus the former seems cleaner and more consistent. Signed-off-by: Emil Velikov <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* loader: don't leak udev_enumerateGuillaume Desmottes2015-07-111-0/+4
| | | | | | Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90073 Signed-off-by: Guillaume Desmottes <[email protected]> Reviewed-by: Emil Velikov <[email protected]>
* loader: Look for any version of currently linked libudev.soChris Wilson2015-07-081-18/+28
| | | | | | | | | | | | | | | | | | | | | | Since there was an ABI break and linking twice against libudev.so.0 and libudev.so.1 causes the application to quickly crash, we first check if the application is currently linked against libudev before dlopening a local handle. However for backwards/forwards compatability, we need to inspect the application for current linkage against all known versions first. Not doing so causes a crash when both libraries are present and so mesa chooses libudev.so.1 but the application was linked against libudev.so.0. Signed-off-by: Chris Wilson <[email protected]> Emil Velikov: I'm ever so slightly conserned that RTLD_NOLOAD is not part of the POSIX standard, thus it's missing on some platforms (*BSD seems ok, while Solaris, MacOS are not). Reviewed-by: Emil Velikov <[email protected]> Cc: [email protected]
* loader: move loader_open_device out of HAVE_LIBUDEV blockJulien Isorce2015-06-241-18/+18
| | | | | | | | | | | | | | | | | | Fixes the following build issue, when building without libudev. CCLD libGL.la ./.libs/libglx.a(dri2_glx.o): In function `dri2CreateScreen': src/glx/dri2_glx.c:1186: undefined reference to `loader_open_device' collect2: ld returned 1 exit status CCLD libEGL.la Undefined symbols for architecture x86_64: "_loader_open_device", referenced from: _dri2_initialize_x11_dri2 in libegl_dri2.a(platform_x11.o) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91077 Signed-off-by: Julien Isorce <[email protected]> Reviewed-by: Emil Velikov <[email protected]>
* loader: Rename drm_open_device() to loader_open_device() and share itDerek Foreman2015-06-232-3/+6
| | | | | | | | | This is already our common idiom for opening files with CLOEXEC and it's a little ugly, so let's share this one implementation. Signed-off-by: Derek Foreman <[email protected]> Reviewed-by: Kristian Høgsberg <[email protected]> Reviewed-by: Emil Velikov <[email protected]>
* mesa: build xmlconfig to a separate static libraryErik Faye-Lund2015-06-121-7/+3
| | | | | | | | | | | | | | | | | | | | As we use the file from both the dri modules and loader, we end up with multiple definition of the symbols provided in our gallium dri modules. Additionally we compile the file twice. Resolve both issues, effectively enabling the build on toolchains which don't support -Wl,--allow-multiple-definition. v2: [Emil Velikov] - Fix the Scons/Android build. - Resolve libgbm build issues (bring back the missing -lm) Cc: Julien Isorce <[email protected]> Cc: "10.5 10.6" <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90310 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90905 Acked-by: Matt Turner <[email protected]> Signed-off-by: Emil Velikov <[email protected]>
* android: loader: export the path to be includedChih-Wei Huang2015-06-091-0/+2
| | | | | Signed-off-by: Chih-Wei Huang <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* egl: Add needed extern "C" for C++ accessAlexander von Gluck IV2015-05-141-0/+9
| | | | | | * Haiku's egl driver is C++ due to the interface natively being C++ Reviewed-⁠by: Brian Paul <[email protected]>
* Fix a few typosZoë Blade2015-04-271-1/+1
| | | | Reviewed-by: Francisco Jerez <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 22:29:26 +0000