aboutsummaryrefslogtreecommitdiffstats
path: root/src/glsl/linker.h
Commit message (Collapse)AuthorAgeFilesLines
* glsl: a shader storage buffer must be smaller than the maximum size allowedSamuel Iglesias Gonsalvez2015-09-251-0/+1
| | | | | | | | | | | | | | | Otherwise, generate a link time error as per the ARB_shader_storage_buffer_object spec. v2: - Fix error message (Jordan) v3: - Move std140_size() changes to its own patch (Kristian) Signed-off-by: Samuel Iglesias Gonsalvez <[email protected]> Reviewed-by: Jordan Justen <[email protected]> Reviewed-by: Kristian Høgsberg <[email protected]>
* glsl: Add std430 support to program_resource_visitor's member functionsSamuel Iglesias Gonsalvez2015-09-251-2/+4
| | | | | | | | | | | | | They are used to calculate the offset, array stride of uniform/shader storage buffer variables. Take into account this info to get the right value for std430. v2: - Fix commit log line length and indention. (Jordan) Signed-off-by: Samuel Iglesias Gonsalvez <[email protected]> Reviewed-by: Jordan Justen <[email protected]> Reviewed-by: Kristian Høgsberg <[email protected]>
* glsl: order indices for samplers inside a struct arrayTimothy Arceri2015-09-171-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows the correct offset to be easily calculated for indirect indexing when a struct array contains multiple samplers, or any crazy nesting. The indices for the folling struct will now look like this: Sampler index: 0 Name: s[0].tex Sampler index: 1 Name: s[1].tex Sampler index: 2 Name: s[0].si.tex Sampler index: 3 Name: s[1].si.tex Sampler index: 4 Name: s[0].si.tex2 Sampler index: 5 Name: s[1].si.tex2 Before this change it looked like this: Sampler index: 0 Name: s[0].tex Sampler index: 3 Name: s[1].tex Sampler index: 1 Name: s[0].si.tex Sampler index: 4 Name: s[1].si.tex Sampler index: 2 Name: s[0].si.tex2 Sampler index: 5 Name: s[1].si.tex2 struct S_inner { sampler2D tex; sampler2D tex2; }; struct S { sampler2D tex; S_inner si; }; uniform S s[2]; V3: Update comments with suggestions from Jason V2: rename struct array counter to have better name Reviewed-by: Jason Ekstrand <[email protected]>
* glsl: Move link_get_main_function_signature to a common locationJordan Justen2015-09-131-3/+0
| | | | | | | | | | | Also rename to _mesa_get_main_function_signature. We will call it near the end of compilation to insert some code into main for initializing some compute shader global variables. Signed-off-by: Jordan Justen <[email protected]> Reviewed-by: Tapani Pälli <[email protected]> Reviewed-by: Eduardo Lima Mitev <[email protected]>
* glsl: move array validation into its own functionTimothy Arceri2015-03-061-0/+5
| | | | | | V2: return true when var->type is unsized but max access is within valid range Reviewed-by: Mark Janes <[email protected]>
* glsl: fix uniform linking logic in the presence of structsIlia Mirkin2015-02-191-0/+6
| | | | | | | | | | | | | Add a enter/leave record callback so that the offset may be aligned to the proper value. Otherwise only leaf fields are called, and the first field needs to be aligned to the outer struct's base alignment while the last field needs to be aligned to the inner struct's base alignment. This removes most usage of the last field/record type values passed into visit_field. Signed-off-by: Ilia Mirkin <[email protected]> Reviewed-by: Dave Airlie <[email protected]>
* glsl: remove unused link_assign_uniform_block_offsetsTapani Pälli2014-09-261-3/+0
| | | | | | | ubo offsets are assigned by link_uniform_blocks since 514f8c7e Signed-off-by: Tapani Pälli <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl/linker: Make get_main_function_signature publicIan Romanick2014-09-101-0/+3
| | | | | | | | The next patch will use this function in a different file. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Tapani Pälli <[email protected]>
* glsl: Use UniformBooleanTrue value for uniform initializers.Matt Turner2014-08-181-2/+4
| | | | Reviewed-by: Anuj Phogat <[email protected]>
* linker: Add a last_field parameter to various program_resource_visitor methodsIan Romanick2014-08-041-2/+10
| | | | | | | | | I also considered renaming visit_field(const glsl_struct_field *) to entry_record and adding an exit_record method. This would be more similar to the hierarchical visitor. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Matt Turner <[email protected]>
* glsl: Fix interstage uniform interface block link error detection.Paul Berry2013-11-211-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, we checked for interstage uniform interface block link errors in validate_interstage_interface_blocks(), which is only called on pairs of adjacent shader stages. Therefore, we failed to detect uniform interface block mismatches between non-adjacent shader stages. Before the introduction of geometry shaders, this wasn't a problem, because the only supported shader stages were vertex and fragment shaders, therefore they were always adjacent. However, now that we allow a program to contain vertex, geometry, and fragment shaders, that is no longer the case. Fixes piglit test "skip-stage-uniform-block-array-size-mismatch". Cc: "10.0" <[email protected]> v2: Rename validate_interstage_interface_blocks() to validate_interstage_inout_blocks() to reflect the fact that it no longer validates uniform blocks. Reviewed-by: Jordan Justen <[email protected]> v3: Make validate_interstage_inout_blocks() skip uniform blocks. Reviewed-by: Ian Romanick <[email protected]>
* glsl: Linker support for ARB_shader_atomic_counters.Francisco Jerez2013-11-071-0/+8
| | | | | | | | | | | | | | | v2: Add comments on the purpose of the auxiliary data structures. Check for atomic counter overlaps. Use the contains_atomic() convenience method. Add static assert with the number of expected shader stages. v3: Don't resize atomic arrays. v4: Add comment on the reason why we don't resize atomic counter arrays. Use 'strcmp(...) == 0' instead of '!strcmp(...)'. v5 (idr): Don't use STL in the linker. Signed-off-by: Francisco Jerez <[email protected]> Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl: Simplify the interface to link_invalidate_variable_locationsIan Romanick2013-10-221-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The unit tests added in the previous commits prove some things about the state of some internal data structures. The most important of these is that all built-in input and output variables have explicit_location set. This means that link_invalidate_variable_locations doesn't need to know the range of non-generic shader inputs or outputs. It can simply reset location state depending on whether explicit_location is set. There are two additional assumptions that were already implicit in the code that comments now document. - ir_variable::is_unmatched_generic_inout is only used by the linker when connecting outputs from one shader stage to inputs of another shader stage. - Any varying that has explicit_location set must be a built-in. This will be true until GL_ARB_separate_shader_objects is supported. As a result, the input_base and output_base parameters to link_invalidate_variable_locations are no longer necessary, and the code for resetting locations and setting is_unmatched_generic_inout can be simplified. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* glsl: Modify interface to link_invalidate_variable_locationsIan Romanick2013-10-221-2/+2
| | | | | | | | | | | This will make it easier to unit test this function in successive patches. Also, correct the prototype in linker.h. It was... wrong. v2: Split the interface change from adding the unit tests. Suggested by Paul. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* glsl: Add new overload of program_resource_visitor::visit_field methodIan Romanick2013-08-191-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The outer-most record is passed into the visit_field method for the first field. In other words, in the following structure: struct S1 { vec4 v; float f; }; struct S { S1 s1; S1 s2; }; uniform Ubo { S s; }; s.s1.v would get record_type = S (because s1.v is the first non-record field in S), and s.s2.v would get record_type = S1. s.s1.f and s.s2.f would get record_type = NULL becuase they aren't the first field of anything. This new overload isn't used yet, but the next patch will add several uses. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Paul Berry <[email protected]> Cc: "9.2 9.1" [email protected]
* Move count_attribute_slots() out of the linker and into glsl_type.Paul Berry2013-08-011-3/+0
| | | | | | | | | | | | | Our previous justification for leaving this function out of glsl_type was that it implemented counting rules that were specific to GLSL 1.50. However, these counting rules also describe the number of varying slots that Mesa will assign to a varying in the absence of varying packing. That's useful to be able to compute from outside of the linker code (a future patch will use it from ir_set_program_inouts.cpp). So go ahead and move it to glsl_type. Reviewed-by: Ian Romanick <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Use a consistent technique for tracking link success/failure.Paul Berry2013-07-301-3/+4
| | | | | | | | | | | | | | | | | | This patch changes link_shaders() so that it sets prog->LinkStatus to true when it starts, and then relies on linker_error() to set it to false if a link failure occurs. Previously, link_shaders() would set prog->LinkStatus to true halfway through its execution; as a result, linker functions that executed during the first half of link_shaders() would have to do their own success/failure tracking; if they didn't, then calling linker_error() would add an error message to the log, but not cause the link to fail. Since it wasn't always obvious from looking at a linker function whether it was called before or after link_shaders() set prog->LinkStatus to true, this carried a high risk of bugs. Reviewed-by: Jordan Justen <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl: Add error message for intrastage interface block mismatch.Paul Berry2013-07-301-1/+2
| | | | | | | | Previously we failed to link (which is correct), but we did not output an error message, which could have been confusing for users. Reviewed-by: Jordan Justen <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl: Remove bogus check on return value of link_uniform_blocks().Paul Berry2013-07-301-1/+1
| | | | | | | | | | | | | | | | A comment in link_intrastage_shaders(), and an if-test that followed it, seemed to indicate that link_uniform_blocks() would return a negative value in the event of an error. But this is not the case--all error checking has already been performed by validate_intrastage_interface_blocks(), and link_uniform_blocks() can only return unsigned values. So get rid of the if-test and change the return type of link_intrastage_shaders() to clarify that it can only return unsigned values. Reviewed-by: Jordan Justen <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl linker: compare interface blocks during interstage linkingKenneth Graunke2013-05-231-0/+4
| | | | | | | | | | | | Verify that interface blocks match when linking separate shader stages into a program. Fixes piglit glsl-1.50 tests: * linker/interface-blocks-vs-fs-member-count-mismatch.shader_test * linker/interface-blocks-vs-fs-member-order-mismatch.shader_test Signed-off-by: Kenneth Graunke <[email protected]> Signed-off-by: Jordan Justen <[email protected]>
* glsl linker: compare interface blocks during intrastage linkingJordan Justen2013-05-231-0/+4
| | | | | | | | | | | | | | | | Verify that interface blocks match when combining compilation units at the same stage. (For example, when merging all vertex shaders.) Fixes piglit glsl-1.50 test: * linker/interface-blocks-multiple-vs-member-count-mismatch.shader_test v5 (Ken): Rename to link_interface_blocks.cpp and drop the separate .h file for consistency with other linker code. Remove "ok" variable. Fold cross_validate_interface_blocks into its caller. Signed-off-by: Jordan Justen <[email protected]> Signed-off-by: Kenneth Graunke <[email protected]>
* glsl: Rename uniform_field_visitor to program_resource_visitor.Paul Berry2013-02-041-16/+17
| | | | | | | | | | | | | | | | There's actually nothing uniform-specific in uniform_field_visitor. It is potentially useful for all kinds of program resources (in particular, future patches will use it for transform feedback varyings). This patch renames it to program_resource_visitor, and clarifies several comments, to reflect the fact that it is useful for more than just uniforms. NOTE: This is a candidate for the 9.1 branch. Reviewed-by: Jordan Justen <[email protected]> Reviewed-by: Matt Turner <[email protected]>
* glsl: Add link_uniform_blocks to calculate all UBO data at link-timeIan Romanick2013-01-251-0/+7
| | | | | | | | Calculate all of the block member offsets, the IndexNames, and everything else to do with every UBO. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Jordan Justen <[email protected]>
* glsl: Add new uniform_field_visitor::process variantIan Romanick2013-01-251-0/+17
| | | | | | | | | | This flavor takes a type and a base name. It will be used to handle cases where the block name (instead of the instance name) is used for an interface block. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Carl Worth <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Add new uniform_field_visitor::visit_field variantIan Romanick2013-01-251-0/+10
| | | | | | Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Carl Worth <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Modify uniform_field_visitor::visit_field to take a row_major parameterIan Romanick2013-01-251-1/+3
| | | | | | | | | | Not used yet, but the UBO layout visitor will use this. v2: Remove a spruious hunk. This is moved to the patch "glsl: Remove ir_variable::uniform_block". Suggested by Carl Worth. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Modify uniform_field_visitor::recursion to take a row_major parameterIan Romanick2013-01-251-1/+8
| | | | | | | | | | | Not used yet, but the UBO layout visitor will use this. v2: Add some commentary as to why row_major is always set to false in process. Suggesed by Paul Berry. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Carl Worth <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* linker: Refactor intra-stage block compatabililty testingIan Romanick2013-01-251-0/+4
| | | | | | | | | | | | | | | | Also slightly change the compatibility test. Instead of comparing the offsets of the block variables, compare the packing mode of the blocks. Ideally we don't want to assign the offsets until a later stage of linking. This is put in a new file called link_uniform_blocks.cpp. Some new functions related to uniform blocks are going to live in that file as well. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Carl Worth <[email protected]> Reviewed-by: Chad Versace <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Separate varying linking code to its own file.Paul Berry2013-01-081-0/+9
| | | | | | | | linker.cpp is getting pretty big, and we're about to add even more varying packing code, so split out the linker code that concerns varyings to its own file. Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Assign locations for uniforms in UBOs using the std140 rules.Eric Anholt2012-07-201-0/+3
| | | | | | Fixes piglit layout-std140. Reviewed-by: Ian Romanick <[email protected]>
* glsl: Merge the lists of uniform blocks into the linked shader program.Eric Anholt2012-07-201-0/+6
| | | | | | This attempts error-checking, but the layout isn't done yet. Reviewed-by: Ian Romanick <[email protected]>
* glsl: Set initial values for uniforms in the linkerIan Romanick2012-05-231-0/+3
| | | | | | | | | | | | | | v2: Fix handling of arrays-of-structure. Thanks to Eric Anholt for pointing this out. v3: Minor comment change based on feedback from Ken. Fixes piglit glsl-1.20/execution/uniform-initializer/fs-structure-array and glsl-1.20/execution/uniform-initializer/vs-structure-array. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* ralloc: Make rewrite_tail increase "start" by the new text's length.Kenneth Graunke2012-02-281-1/+1
| | | | | | | | | | | | | | | | | | Both callers of rewrite_tail immediately compute the new total string length by adding the (known) length of the existing string plus the length of the newly appended text. Unfortunately, callers generally won't know the length of the new text, as it's printf-formatted. Since ralloc already computes this length, it makes sense to add it in and save the caller the effort. This simplifies both existing callers, but more importantly, will allow for cheap-appending in the next commit. v2: The link_uniforms code needs both the old and new length. Apply the obvious fix (which sadly makes it less of a cleanup). Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Ian Romanick <[email protected]> [v1] Acked-by: José Fonseca <[email protected]> [v1]
* linker: Track uniform locations to new tracking structuresIan Romanick2011-11-071-0/+3
| | | | | | | This is just the infrastructure and the code. It's not used yet. Signed-off-by: Ian Romanick <[email protected]> Tested-by: Tom Stellard <[email protected]>
* linker: Make invalidate_variable_locations available outside the compilation ↵Ian Romanick2011-11-071-0/+4
| | | | | | | unit Signed-off-by: Ian Romanick <[email protected]> Tested-by: Tom Stellard <[email protected]>
* linker: Add uniform_field_visitor class to process leaf fields of a uniformIan Romanick2011-10-251-0/+43
| | | | | Signed-off-by: Ian Romanick <[email protected]> Signed-off-by: Kenneth Graunke <[email protected]>
* linker: Make linker_{error,warning} generally availableIan Romanick2011-08-021-3/+0
| | | | | | | | | | linker_warning is a new function. It's identical to linker_error except that it doesn't set LinkStatus=false and it prepends "warning: " on messages instead of "error: ". Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* linker: Make linker_error set LinkStatus to falseIan Romanick2011-08-021-1/+1
| | | | | | | | | | | | Remove the other places that set LinkStatus to false since they all immediately follow a call to linker_error. The function linker_error was previously known as linker_error_printf. The name was changed because it may seem surprising that a printf function will set an error flag. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* linker: First bits of intrastage, intershader function linkingIan Romanick2010-07-191-0/+35
This handles the easy case of linking a function in a different compilation unit that doesn't call any functions or reference any global variables.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 00:03:17 +0000