summaryrefslogtreecommitdiffstats
path: root/src/glsl/glsl_parser.yy
Commit message (Collapse)AuthorAgeFilesLines
* glsl: throw error when using invariant(all) in a fragment shaderTapani Pälli2014-12-031-1/+12
| | | | | | | | Note that some of the GLSL specifications explicitly state this as compile error, some simply state that 'it is an error'. Signed-off-by: Tapani Pälli <[email protected]> Reviewed-by: Chris Forbes <[email protected]>
* glsl: Add strings.h on non-MSC platformsAlexander von Gluck IV2014-08-271-0/+3
| | | | | | | | | | | | * IEEE Std 1003.1-2001 placed strcasecmp() in strings.h. * ISO C99 doesn't mention strcase* in string.h * On all platforms I could find, strcasecmp is in strings.h and string.h as a compatibility layer for software written pre-2001 POSIX * Technically strcasecmp should be only in strings.h and the man pages back this up. * Tested build on CentOS and Haiku Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Remove bogus "OUPTUT" tokenChris Forbes2014-08-261-1/+1
| | | | | | | | This is never used. There is another token "OUTPUT" which the lexer can generate, though. This has been around since the dawn of time; is most likely a typo. Signed-off-by: Chris Forbes <[email protected]>
* glsl: add a mechanism to allow #extension directives in the middle of shadersMarek Olšák2014-07-181-0/+8
| | | | | | | | | | | This is needed to make Unigine Heaven 4.0 and Unigine Valley 1.0 work with sample shading. Also, if this is disabled, the error message at least makes sense now. Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl: Add parsing support for multi-stream output in geometry shaders.Samuel Iglesias Gonsalvez2014-06-301-0/+53
| | | | | | | | This implements parsing requirements for multi-stream support in geometry shaders as defined in ARB_gpu_shader5. Signed-off-by: Samuel Iglesias Gonsalvez <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl: Relax combinations of layout qualifiers with other qualifiers.Chris Forbes2014-06-261-28/+8
| | | | | | | | | | | | | | | | | | | Previously we disallowed any combination of layout with interpolation, invariant, or precise qualifiers. There is very little spec guidance on exactly which combinations should be allowed, but with ARB_sso it's useful to allow these qualifiers with rendezvous-by-location. Since it's unclear exactly where the layout qualifier should appear when combined with other qualifiers, we will allow it anywhere before the auxiliary storage qualifier. This allows enough flexibility for all examples I've seen, while keeping the auxiliary-storage-qualifier / storage-qualifier pair together (as they are a single qualifier in the spec prior to ARB_shading_language_420pack) Signed-off-by: Chris Forbes <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Fix typo in comment.Chris Forbes2014-06-121-1/+1
| | | | Signed-off-by: Chris Forbes <[email protected]>
* glsl: Allow `precise` as a parameter qualifierChris Forbes2014-06-041-2/+10
| | | | | Signed-off-by: Chris Forbes <[email protected]> Reviewed-by: Jordan Justen <[email protected]>
* glsl: Add support for `precise` redeclarationsChris Forbes2014-06-041-0/+12
| | | | | | | | This works like glsl-1.20+'s invariant redeclarations, but with fewer restrictions, since `precise` is allowed on pretty much anything. Signed-off-by: Chris Forbes <[email protected]> Reviewed-by: Jordan Justen <[email protected]>
* glsl: add support for `precise` in type_qualifierChris Forbes2014-06-041-8/+31
| | | | | Signed-off-by: Chris Forbes <[email protected]> Reviewed-by: Jordan Justen <[email protected]>
* glsl: remove outdated comment, move sample to correct blockChris Forbes2014-06-041-3/+3
| | | | | Signed-off-by: Chris Forbes <[email protected]> Reviewed-by: Jordan Justen <[email protected]>
* glsl: fix bogus layout qualifier warningsTapani Pälli2014-05-061-4/+7
| | | | | | | | | | Print out GL_ARB_explicit_attrib_location warnings only when parsing attribute that uses "location" qualifier. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77245 Signed-off-by: Tapani Pälli <[email protected]> Reviewed-by: Anuj Phogat <[email protected]> Cc: "10.1 10.2" <[email protected]>
* glsl: make static constant variables "static const"Chia-I Wu2014-05-021-2/+2
| | | | | | | | | This allows them to be moved to .rodata, and allow us to be sure that they will not be modified. Signed-off-by: Chia-I Wu <[email protected]> Reviewed-by: Ian Romanick <[email protected]> Reviewed-by: Timothy Arceri <[email protected]>
* glsl: remove {add,get}_type_ast from glsl_symbol_tableChia-I Wu2014-03-281-1/+0
| | | | | | | They are not needed since 0da1a2cc369052643ccaea75a1722cc37652d82a. Signed-off-by: Chia-I Wu <[email protected]> Reviewed-by: Matt Turner <[email protected]>
* glsl: Change locations from yylloc to appropriate tokens positions.Sir Anthony2014-03-081-101/+114
| | | | Reviewed-by: Carl Worth <[email protected]>
* glsl: parse invocations layout qualifier for ARB_gpu_shader5Jordan Justen2014-02-201-0/+23
| | | | | | | | | | | | _mesa_glsl_parse_state in_qualifier->invocations will store the invocations count. v3: * Use in_qualifier to allow the primitive to be specied separately from the invocations count (merge_qualifiers) Signed-off-by: Jordan Justen <[email protected]> Reviewed-by: Anuj Phogat <[email protected]>
* glsl: convert GS input primitive to use ast_type_qualifierJordan Justen2014-02-201-55/+2
| | | | | | | | | | | | | | | | | | | | | | | | We introduce a new merge_in_qualifier ast_type_qualifier which allows specialized handling of merging input layout qualifiers. By merging layout qualifiers into state->in_qualifier, we allow multiple input qualifiers. For example, the primitive type can be specified specified separately from the invocations count (ARB_gpu_shader5). state->gs_input_prim_type is moved into state->in_qualifier->prim_type state->gs_input_prim_type_specified is still processed separately so we can determine when the input primitive is specified. This is important since certain scenerios are not supported until after the primitive type has been specified in the shader code. v4: * Merge with compute shader input layout qualifiers Signed-off-by: Jordan Justen <[email protected]> Reviewed-by: Anuj Phogat <[email protected]>
* glsl: rename _restrict to restrict_flagBrian Paul2014-02-121-1/+1
| | | | | | | | | | | To fix MSVC compile breakage. Evidently, _restrict is an MSVC keyword, though the docs only mention __restrict (with two underscores). Note: we may want to also rename _volatile to volatile_flag to be consistent. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74900 Reviewed-by: Ian Romanick <[email protected]>
* glsl/parser: Handle image built-in types.Francisco Jerez2014-02-121-0/+33
| | | | Reviewed-by: Paul Berry <[email protected]>
* glsl/parser: Handle image memory qualifiers.Francisco Jerez2014-02-121-0/+83
| | | | | | v2: Make the "map" array static const. Reviewed-by: Paul Berry <[email protected]>
* glsl/parser: Handle the early_fragment_tests input layout qualifier.Francisco Jerez2014-02-121-1/+17
| | | | | | v2: Only allow the early_fragment_tests qualifier in fragment shaders. Reviewed-by: Paul Berry <[email protected]>
* glsl/lexer: Add new tokens for ARB_shader_image_load_store.Francisco Jerez2014-02-121-9/+11
| | | | Reviewed-by: Paul Berry <[email protected]>
* glsl/ast: Keep track of type qualifiers defined by ARB_shader_image_load_store.Francisco Jerez2014-02-121-2/+2
| | | | | | | | v2: Add comment next to the read_only and write_only qualifier flags. Change temporary copies of the type qualifier mask to use uint64_t too. Reviewed-by: Paul Berry <[email protected]>
* glsl: Don't lose precision qualifiers when encountering "centroid".Kenneth Graunke2014-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mesa fails to retain the precision qualifier when parsing: #version 300 es centroid in mediump vec2 v; Consider how the parser's type_qualifier production is applied. First, the precision_qualifier rule creates a new ast_type_qualifier: <precision: mediump> Then the storage_qualifier rule creates a second one: <flags: in> and calls merge_qualifier() to fold in any previous qualifications, returning: <flags: in, precision: mediump> Finally, the auxiliary_storage_qualifier creates one for "centroid": <flags: centroid> it then does $$ = $1 and $$.flags |= $2.flags, resulting in: <flags: centroid, in> Since precision isn't stored in the flags bitfield, it is lost. We need to instead call merge_qualifier to combine all the fields. Cc: [email protected] Signed-off-by: Kenneth Graunke <[email protected]> Reported-by: Kevin Rogovin <[email protected]> Reviewed-by: Matt Turner <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl/cs: Handle compute shader local_size_{x,y,z} declaration.Paul Berry2014-02-051-21/+73
| | | | Reviewed-by: Jordan Justen <[email protected]>
* glsl: remove remaining is_array variablesTimothy Arceri2014-01-231-15/+15
| | | | | | | | | Previously the reason we needed is_array was because we used array_size == NULL to represent both non-arrays and unsized arrays. Now that we use a non-NULL array_specifier to represent an unsized array, is_array is redundant. Signed-off-by: Timothy Arceri <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* glsl: Add ARB_arrays_of_arrays support to yacc definition and astTimothy Arceri2014-01-231-72/+56
| | | | | | | Adds array specifier object to hold array information Signed-off-by: Timothy Arceri <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* glsl: Simplify aggregate type inference to prepare for ARB_arrays_of_arrays.Paul Berry2014-01-221-27/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the time it is not necessary to perform type inference to compile GLSL; the type of every expression can be inferred from the contents of the expression itself (and previous type declarations). The exception is aggregate initializers: their type is determined by the LHS of the variable being assigned to. For example, in the statement: mat2 foo = { { 1, 2 }, { 3, 4 } }; the type of { 1, 2 } is only known to be vec2 (as opposed to, say, ivec2, uvec2, int[2], or a struct) because of the fact that the result is being assigned to a mat2. Previous to this patch, we handled this situation by doing some type inference during parsing: when parsing a declaration like the one above, we would call _mesa_set_aggregate_type(), which would infer the type of each aggregate initializer and store it in the corresponding ast_aggregate_initializer::constructor_type field. Since this happened at parse time, we couldn't do the type inference using glsl_type objects; we had to use ast_type_specifiers, which are much more awkward to work with. Things are about to get more complicated when we add support for ARB_arrays_of_arrays. This patch simplifies things by postponing the call to _mesa_set_aggregate_type() until ast-to-hir time, when we have access to glsl_type objects. As a side benefit, we only need to have one call to _mesa_set_aggregate_type() now, instead of six. Reviewed-by: Matt Turner <[email protected]>
* mesa: Clean up nomenclature for pipeline stages.Paul Berry2014-01-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, we had an enum called gl_shader_type which represented pipeline stages in the order they occur in the pipeline (i.e. MESA_SHADER_VERTEX=0, MESA_SHADER_GEOMETRY=1, etc), and several inconsistently named functions for converting between it and other representations: - _mesa_shader_type_to_string: gl_shader_type -> string - _mesa_shader_type_to_index: GLenum (GL_*_SHADER) -> gl_shader_type - _mesa_program_target_to_index: GLenum (GL_*_PROGRAM) -> gl_shader_type - _mesa_shader_enum_to_string: GLenum (GL_*_{SHADER,PROGRAM}) -> string This patch tries to clean things up so that we use more consistent terminology: the enum is now called gl_shader_stage (to emphasize that it is in the order of pipeline stages), and the conversion functions are: - _mesa_shader_stage_to_string: gl_shader_stage -> string - _mesa_shader_enum_to_shader_stage: GLenum (GL_*_SHADER) -> gl_shader_stage - _mesa_program_enum_to_shader_stage: GLenum (GL_*_PROGRAM) -> gl_shader_stage - _mesa_progshader_enum_to_string: GLenum (GL_*_{SHADER,PROGRAM}) -> string In addition, MESA_SHADER_TYPES has been renamed to MESA_SHADER_STAGES, for consistency with the new name for the enum. Reviewed-by: Kenneth Graunke <[email protected]> v2: Also rename the "target" field of _mesa_glsl_parse_state and the "target" parameter of _mesa_shader_stage_to_string to "stage". Reviewed-by: Brian Paul <[email protected]>
* glsl: Replace _mesa_glsl_parser_targets enum with gl_shader_type.Paul Berry2013-12-171-4/+4
| | | | | | These enums were redundant. Reviewed-by: Brian Paul <[email protected]>
* glsl: Add frontend support for `sample` auxiliary storage qualifierChris Forbes2013-12-071-2/+7
| | | | | Signed-off-by: Chris Forbes <[email protected]> Reviewed-by: Francisco Jerez <[email protected]>
* glsl: Implement parser support for atomic counters.Francisco Jerez2013-11-071-2/+11
| | | | | | | | | | | | | | | | v2: Mark atomic counters as read-only variables. Move offset overlap code to the linker. Use the contains_atomic() convenience method. v3: Use pointer to integer instead of non-const reference. Add comment so we remember to add a spec quotation from the next GLSL release once the issue of atomic counter aggregation within structures is clarified. v4 (idr): Don't use std::map because it's overkill. Add an assertion that ctx->Const.MaxAtomicBufferBindings <= MAX_COMBINED_ATOMIC_BUFFERS. Signed-off-by: Francisco Jerez <[email protected]> Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Paul Berry <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl: Move layout(location) checks to AST-to-HIR conversionIan Romanick2013-10-301-19/+15
| | | | | | | | | | | | | This will simplify the addition of layout(location) qualifiers for separate shader objects. This was validated with new piglit tests arb_explicit_attrib_location/1.30/compiler/not-enabled-01.vert and arb_explicit_attrib_location/1.30/compiler/not-enabled-02.vert. v2: Refactor error checking to check_explicit_attrib_location_allowed and eliminate the gotos. Suggested by Paul. Signed-off-by: Ian Romanick <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* glsl: Generalize MSVC fix for strcasecmp().Paul Berry2013-10-291-7/+1
| | | | | | | | This will let us use strcasecmp() from anywhere inside Mesa without having to worry about the fact that it doesn't exist in MSVC. Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl/gs: Prevent illegal input/output primitive types.Paul Berry2013-10-231-3/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From the GLSL 1.50 spec, section 4.3.8.1 (Input Layout Qualifiers): The layout qualifier identifiers for geometry shader inputs are layout-qualifier-id points lines lines_adjacency triangles triangles_adjacency And from section 4.3.8.2 (Output Layout Qualifiers) The layout qualifier identifiers for geometry shader outputs are layout-qualifier-id points line_strip triangle_strip max_vertices = integer-constant We were erroneously allowing line_strip and triangle_strip to be used as input qualifiers, and we were allowing lines, lines_adjacency, triangles, and triangles_adjacency to be used as output qualifiers. Fixes piglit tests "glsl-1.50-gs-{input,output}-layout-qualifiers *". Reviewed-by: Ian Romanick <[email protected]>
* glsl: Fix MSVC build (missing strcasecmp())Paul Berry2013-10-171-1/+7
| | | | | | MSVC doesn't have a strcasecmp() function; it uses _stricmp() instead. Reviewed-by: Jose Fonseca <[email protected]>
* glsl: Treat layout-qualifier-id's as case-insensitive in desktop GLSL.Paul Berry2013-10-171-15/+59
| | | | | | | | | | | | | | | | In desktop GLSL, location qualifiers are case-insensitive. In GLSL ES, they are case-sensitive. This patch handles the difference by using a new function to match layout qualifiers, match_layout_qualifier(), which calls either strcmp() or strcasecmp() as appropriate. Fixes piglit tests: - layout-not-case-sensitive-in.geom - layout-not-case-sensitive-max-vert.geom - layout-not-case-sensitive-out.geom - layout-not-case-sensitive.frag Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Add parser support for unsized arrays in interface blocks.Paul Berry2013-10-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although it's not explicitly stated in the GLSL 1.50 spec, unsized arrays are allowed in interface blocks. section 1.2.3 (Changes from revision 5 of version 1.5) of the GLSL 1.50 spec says: * Completed full update to grammar section. Tested spec examples against it: ... * add unsized arrays for block members And section 7.1 (Vertex and Geometry Shader Special Variables) includes an unsized array in the built-in gl_PerVertex interface block: out gl_PerVertex { vec4 gl_Position; float gl_PointSize; float gl_ClipDistance[]; }; Furthermore, GLSL 4.30 contains an example of an unsized array occurring inside an interface block. From section 4.3.9 (Interface Blocks): uniform Transform { // API uses "Transform[2]" to refer to instance 2 mat4 ModelViewMatrix; mat4 ModelViewProjectionMatrix; vec4 a[]; // array will get implicitly sized float Deformation; } transforms[4]; This patch adds the parser rule to support unsized arrays inside interface blocks. Later patches in the series will add the appropriate semantics to handle them. Fixes piglit tests: - spec/glsl-1.50/execution/unsized-in-unnamed-interface-block - spec/glsl-1.50/linker/unsized-in-unnamed-interface-block Reviewed-by: Jordan Justen <[email protected]>
* glsl: Create and use a has_uniform_buffer_objects() helper.Kenneth Graunke2013-09-261-3/+3
| | | | | | | | | | | This is better than overriding the extension enable based on the language version; it's robust against shaders that do: #version 140 #extension GL_ARB_uniform_buffer_object : disable Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl: Create and use a has_explicit_attrib_location() helper.Kenneth Graunke2013-09-261-1/+1
| | | | | | | | | | | | | | | | | | | Explicit attribute locations are supported with GLSL 3.30, GLSL ES 3.00, or "#extension GL_ARB_explicit_attrib_location: enable". Using a helper function makes it easy to check for this. This enables support in GLSL 3.30, which was previously missing. Previously, we overrode the extension enable flag for ES 3.00. This is not robust against a shader such as: #version 330 #extension GL_ARB_explicit_attrib_location : disable Disabling extensions should not remove core language functionality. Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl: Reallow precision qualifiers on structure membersIan Romanick2013-09-041-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes to the grammar for GL_ARB_shading_language_420pack (commit 6eec502) moved precision qualifiers out of the type_specifier production chain. This caused declarations such as: struct S { lowp float f; }; to generate parse errors. Section 4.1.8 (Structures) of both the GLSL ES 1.00 spec and GLSL 1.30 specs says: "Member declarators may contain precision qualifiers, but may not contain any other qualifiers." So, it sure seems like we shouldn't generate a parse error. :) Instead of type_specifier, use fully_specified_type in struct members. However, fully_specified_type allows a lot of other qualifiers that are not allowed on structure members, so expeclitly disallow them. Note, this makes struct_declaration look an awful lot like member_declaration (used for interface blocks). We may want to (somehow) unify these rules to reduce code duplication at some point. Signed-off-by: Ian Romanick <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68753 Reported-by: Aras Pranckevicius <[email protected]> Cc: Aras Pranckevicius <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Matt Turner <[email protected]> Cc: "9.2" <[email protected]>
* glsl: Remove ubo_qualifiers_allowed variable.Matt Turner2013-08-211-1/+0
| | | | | | | No longer used. Reviewed-by: Ian Romanick <[email protected]> Reviewed-by: Anuj Phogat <[email protected]>
* glsl: Rename ubo_qualifiers_valid to ubo_qualifiers_allowed.Matt Turner2013-08-211-1/+1
| | | | | | | | | The variable means that UBO qualifiers are allowed in a particular context (e.g., not allowed in a struct field declaration), rather than a particular set of UBO qualifiers are valid. Reviewed-by: Ian Romanick <[email protected]> Reviewed-by: Anuj Phogat <[email protected]>
* glsl: Enable ARB_fragment_coord_conventions functionality in GLSL 1.50.Paul Berry2013-08-091-1/+2
| | | | | | | | | GLSL 1.50 incorporates the functionality of the ARB_fragment_coord_conventions extension, so we need to make this functionality available even if the extension isn't enabled. Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Matt Turner <[email protected]>
* glsl: Allow geometry shader input instance arrays to be unsized.Paul Berry2013-08-011-7/+4
| | | | | Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* glsl: Parse the GLSL 1.50 GS layout qualifiers.Eric Anholt2013-08-011-1/+75
| | | | | | | | | | | | | | | Limited semantic checking (compatibility between declarations, checking that they're in the right shader target, etc.) is done. v2: Remove stray debug printfs. v3 (Paul Berry <[email protected]>): Process input layout qualifiers at ast_to_hir time rather than at parse time, since certain error conditions depend on the relative ordering between input layout qualifiers, declarations, and calls to .length(). Reviewed-by: Ian Romanick <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* glsl: Switch from the deprecated YYLEX_PARAM to %lex-param.Kenneth Graunke2013-07-311-5/+3
| | | | | | | | | | | | | | | | | | | | | YYLEX_PARAM is no longer supported as of Bison 3.0. Instead, the Bison developers recommend using %lex-param. %lex-param takes a type and variable name, similar to %parse-param, so you can't pass an arbitrary expression like state->scanner. But Flex insists on passing the actual scanner object, not an arbitrary object like state. To solve this, the parser defines a wrapper lex() function which accepts "state," and calls Flex's lex() function with state->scanner. Fixes the build with Bison 3.0. Also works with Bison 2.7.1. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67354 Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Matt Turner <[email protected]> Tested-by: Laurent Carlier <[email protected]> Cc: "9.2" [email protected]
* glsl: Change the lexer's namespace.Kenneth Graunke2013-07-311-0/+6
| | | | | | | | | | | | Bison 3.0 removes the YYLEX_PARAM macro. In preparation for handling this using %lex-param, the parser needs a wrapper function for the actual Flex lex() function. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67354 Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Matt Turner <[email protected]> Tested-by: Laurent Carlier <[email protected]> Cc: "9.2" [email protected]
* glsl: Be consistent about '\n', '.', and capitalization in errors/warnings.Paul Berry2013-07-271-46/+46
| | | | | | | | | | | | The majority of calls to _mesa_glsl_error(), _mesa_glsl_warning(), and _mesa_glsl_parse_state::check_version() use a message that begins with a lower case letter and ends without a period. This patch makes all messages follow that convention. Also, error/warning messages shouldn't end in '\n', since _mesa_glsl_msg() automatically adds '\n' at the end of the message. Reviewed-by: Matt Turner <[email protected]>
* glsl: Parse the "binding" keyword and store it in ast_type_qualifier.Kenneth Graunke2013-07-181-0/+6
| | | | | | | | | Nothing actually uses this yet. v2: Remove >= 0 checks. They'll be handled in later validation. Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Paul Berry <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 15:30:48 +0000