aboutsummaryrefslogtreecommitdiffstats
path: root/src/gallium
Commit message (Collapse)AuthorAgeFilesLines
* gm107/ir: emit RED instead of ATOM when no dstSamuel Pitoiset2016-11-051-1/+28
| | | | | | | | | | | | | This is similar to NVC0 and GK110 emitters where we emit reduction operations instead of atomic operations when the destination is not used. Found after writing some tests which check if performance counters return the expected value. In that case, gred_count returned 0 on gm107 while at least gk106 returned the correct value. Signed-off-by: Samuel Pitoiset <[email protected]> Reviewed-by: Ilia Mirkin <[email protected]>
* android: amd/common: add support for libmesa_amd_commonMauro Rossi2016-11-051-1/+1
| | | | | | | | | | | | | | | Fixes the following building error introduced with commit 7115e56 and related amd/common dependencies: external/mesa/src/gallium/drivers/radeonsi/si_shader.c:6861: error: undefined reference to 'ac_is_sgpr_param' external/mesa/src/gallium/drivers/radeonsi/si_shader.c:6951: error: undefined reference to 'ac_is_sgpr_param' clang++: error: linker command failed with exit code 1 (use -v to see invocation) ninja: build stopped: subcommand failed. build/core/ninja.mk:148: recipe for target 'ninja_wrapper' failed make: *** [ninja_wrapper] Error 1 Signed-off-by: Marek Olšák <[email protected]>
* winsys/radeon: don't call surface_best for FMASKMarek Olšák2016-11-051-1/+1
| | | | | | Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98518 Acked-by: Edward O'Callaghan <[email protected]>
* vc4: Use Newton-Raphson on the 1/W write to fix glmark2 terrain.Eric Anholt2016-11-041-1/+1
| | | | | | | The 1/W was apparently not accurate enough, and we were getting sparklies in the distance. The closed driver also did a N-R step here. Cc: <[email protected]>
* vc4: Make sure that vertex shader texture2D() calls use LOD 0.Eric Anholt2016-11-041-0/+10
| | | | | I noticed this while trying to debug glmark2 terrain (which does vertex shader texturing, but no mipmaps on its textures sampled from the VS).
* radeonsi: fix vertex fetches for 2_10_10_10 formatsNicolai Hähnle2016-11-045-6/+78
| | | | | | | | | | | The hardware always treats the alpha channel as unsigned, so add a shader workaround. This is rare enough that we'll just build a monolithic vertex shader. The SINT case cannot actually happen in OpenGL, but I've included it for completeness since it's just a mix of the other cases. Reviewed-by: Marek Olšák <[email protected]>
* Revert "st/vdpau: use linear layout for output surfaces"Dave Airlie2016-11-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit d180de35320eafa3df3d76f0e82b332656530126. This is a radeon specific hack that causes problems on nouveau when combined with the SHARED flag later. If radeonsi needs a fix for this, please fix it in the driver. [chk] Using linear surfaces for this makes sense because tilling isn't beneficial and the surfaces can potentially be shared with other GPUs using the VDPAU OpenGL interop. [airlied] I think we need a flag that isn't SHARED/LINEAR that is more SHARED_OTHER_GPU. [mareko] Does radeonsi need PIPE_BIND_VIDEO_DECODE_OUTPUT that it would translate into linear ? [mareko] My only concern is decoding performance. If the decoder works in 64x1 blocks, tiling will hurt. That's the theory. I don't know how the decoder works. Cc: 12.0 13.0 <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Tested-by: Ilia Mirkin <[email protected]> Tested-by: Nayan Deshmukh <[email protected]> (I+A)
* radeonsi: fix an assertion failure in si_decompress_sampler_color_texturesMarek Olšák2016-11-041-1/+3
| | | | | | | | | This fixes a crash in Deus Ex: Mankind Divided. Release builds were unaffected, so it's not too serious. Cc: 11.2 12.0 13.0 <[email protected]> Reviewed-by: Bas Nieuwenhuizen <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* radeonsi: enable GLSL 4.50Nicolai Hähnle2016-11-041-1/+1
| | | | | Reviewed-by: Edward O'Callaghan <[email protected]> Reviewed-by: Dave Airlie <[email protected]>
* gallium/radeon: Multiply bpe by nsamples in surf_winsys_to_drmMichel Dänzer2016-11-041-2/+5
| | | | | | | For symmetry with surf_drm_to_winsys. Reviewed-by: Nicolai Hähnle <[email protected]> Reviewed-by: Marek Olšák <[email protected]>
* gallium/radeon: Use flags parameter in radeon_winsys_surface_initMichel Dänzer2016-11-041-1/+1
| | | | | | | Fixes valgrind warnings about surf_ws->flags being uninitialized while starting X. Reviewed-by: Nicolai Hähnle <[email protected]>
* gallium/radeon: Only convert stencil info if RADEON_SURF_SBUFFER is setMichel Dänzer2016-11-041-10/+21
| | | | | | | Fixes valgrind warnings about using uninitialized memory when starting X. Reviewed-by: Nicolai Hähnle <[email protected]> Reviewed-by: Marek Olšák <[email protected]>
* gallium/radeon: Only loop up to last_level for drm<->winsys conversionMichel Dänzer2016-11-041-2/+2
| | | | | | | | | Fixes spurious assertion failure in surf_level_drm_to_winsys when starting X, due to processing a miplevel which was never initialized. Fixes: e9c76eeeaa67 ("gallium/radeon: remove radeon_surf_level::pitch_bytes") Reviewed-by: Nicolai Hähnle <[email protected]> Reviewed-by: Marek Olšák <[email protected]>
* vc4: Add miptree/texture state support for ETC1 compressed textures.Eric Anholt2016-11-035-1/+33
| | | | | The format isn't flagged as enabled at runtime yet, because we need kernel validation support.
* vc4: Fix use of undefined values since the ralloc zeroing changes.Eric Anholt2016-11-031-6/+11
| | | | | reralloc() no longer zeroes the new contents, so switch to using rzalloc_array() instead.
* draw: fix undefined input handling some more...Roland Scheidegger2016-11-041-50/+54
| | | | | | | | | | | | | | Previous fixes were incomplete - some code still iterated through the number of elements provided by velem layout instead of the number stored in the key (which is the same as the number defined by the vs). And also actually accessed the elements from the layout directly instead of those in the key. This mismatch could still cause crashes. (Besides, it is a very good idea to only use data stored in the key anyway.) v2: move null format check, remove now unnecessary function parameter, some minor prettify Reviewed-by: Jose Fonseca <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* gallium/hud: call fflush() after printing error messagesBrian Paul2016-11-031-1/+9
| | | | | | For Windows. Otherwise, we don't see the message until the program exits. Reviewed-by: Charmaine Lee <[email protected]>
* svga: move svga_mark_surfaces_dirty() prototype to svga_surface.hBrian Paul2016-11-033-10/+4
| | | | Trivial.
* svga: whitespace / formatting clean-up in svga_context.cBrian Paul2016-11-031-28/+34
| | | | Trivial.
* svga: collect stats for time spent in svga_context_finish()Brian Paul2016-11-031-0/+4
| | | | | This should have appeared with commit "svga: add guest statistic gathering interface" from August 4, but was somehow lost.
* svga: invalidate new surface before it is bound to a render target viewCharmaine Lee2016-11-036-3/+42
| | | | | | | | | Invalidate a "new" surface before it is bound to a render target view or depth stencil view in order to avoid the unnecessary host side copy of the surface data before it is rendered to. Note that, recycled surface is already invalidated before it is reused. Reviewed-by: Brian Paul <[email protected]>
* Revert "svga: use untyped surface formats in most cases"Charmaine Lee2016-11-031-7/+4
| | | | | | Using untyped surface formats causes huge performance degradation on Fusion. This reverts commit eb0ced74f6decd1bf1e111b162e1389bede89af6 until the backend has a better solution to address typeless surface formats.
* svga: allow quad blit for more formatsCharmaine Lee2016-11-031-1/+136
| | | | | | | | | | | | Currently blitter will fail if the blit format is different and view-incompatible to the resource format. Instead of punting to software blit which will stall the pipeline, we will create temporary resource to allow blitter to work. Fixes piglit test arb_copy_image-formats. Also tested with MTT piglit, glretrace. Reviewed-by: Brian Paul <[email protected]>
* svga: create BGRX render target view for BGRX_UNORM surfaceCharmaine Lee2016-11-031-1/+2
| | | | | | | | | | Currently we adjust the view format when we are asked to create a BGRA render target view for BGRX surface. But we only look for SVGA3D_B8G8R8X8_TYPELESS surface format. With this patch, we will also check for SVGA3D_B8G8R8X8_UNORM surface format, and use SVGA3D_B8G8R8X8_UNORM as the view format for that case. Reviewed-by: Brian Paul <[email protected]>
* svga: add a helper function to check for typeless formatCharmaine Lee2016-11-032-0/+34
| | | | | | | This patch adds a helper function svga_format_is_typeless() which returns TRUE if the specified format is typeless. Reviewed-by: Brian Paul <[email protected]>
* svga: add SVGA_NEW_FRAME_BUFFER to svga_hw_tss_binding state atomBrian Paul2016-11-031-0/+1
| | | | | | | | | | | We may need to re-emit texture bindings when the framebuffer state changes. In particular, emitting the texture binding can also involve updating a texture from its backing copy during sampler view validation. The backing copy is made during framebuffer validation. This helps to fix an issue with Photoshop on VGPU9 (VMware bug 1723971). Reviewed-by: Charmaine Lee <[email protected]>
* svga: allow copy_region if sample counts matchCharmaine Lee2016-11-031-4/+10
| | | | | | | | | | | With this patch, we will allow blit with copy_region if the source and destination textures have the same sample counts. Fixes failures with piglit tests spec@arb_texture_float@multisample-formats 2 gl_arb_texture_float spec@arb_texture_rg@multisample-formats 2 gl_arb_texture_rg-float Reviewed-by: Brian Paul <[email protected]>
* svga: set rendered-to flag after updating the texture using PredCopyRegionCharmaine Lee2016-11-031-0/+4
| | | | | | | | | | This patch sets the rendered-to flag for the subresource after it is updated using the PredCopyRegion command. This is to ensure that the GB surface will be sync up properly before it will be directly mapped to. Tested with MTT piglit, glretrace. Reviewed-by: Brian Paul <[email protected]>
* svga: add can_use_upload flagCharmaine Lee2016-11-032-31/+37
| | | | | | | | | This patch adds a flag "can_use_upload" to svga_texture structure to avoid some checking of the upload availability at each transfer map time. Tested with Lightsmark2008, Tropics, MTT glretrace, piglit. Reviewed-by: Brian Paul <[email protected]>
* svga: fix texture upload path conditionCharmaine Lee2016-11-031-30/+60
| | | | | | | | | | | | As Thomas suggested, we'll first try to map directly to a GB surface. If it is blocked, then we'll use texture upload buffer. Also if a texture is already "rendered to", that is, the GB surface is already out of sync, then we'll use the texture upload buffer to avoid syncing the GB surface. Tested with Lightsmark2008, Tropics, MTT piglit, glretrace. Reviewed-by: Brian Paul <[email protected]>
* svga: set rendered_to flag with texture uploaded using TransferFromBuffer ↵Charmaine Lee2016-11-031-0/+4
| | | | | | | | | | | | command This patch sets the rendered_to flag for the texture subresource that is uploaded using the TransferFromBuffer command. This is to ensure that the subresource will be read back or invalidated before it will be directly mapped to. This makes sure that the content of the GB surface will not be accidentally overwritten by the device at suspend/resume time. Reviewed-by: Brian Paul <[email protected]>
* svga: Add render_condition boolean flag in struct svga_contextNeha Bhende2016-11-033-1/+6
| | | | | | | | | | | | | | set render_condition flag when driver performs conditional rendering. Blit using DXPredCopyRegion command gets affected by conditional rendering so We should check this flag while performing blit operation Tested with piglit tests. v2: As per Charmaine's comment, setting render_condition flag if svga_query is valid. Tested with pigit tests. Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Charmaine Lee <[email protected]>
* svga: Allow DXPredCopyRegion for depth_and_stencil formats.Neha Bhende2016-11-031-4/+5
| | | | | | | | | | | | | | | DXPredCopyRegion supports copy between src and dst for depth_and_stencil formats if src and dst have same formats. tested ith piglit v2: As per Brian's comment, allow DXPredCopyRegion for depth+stencil buffers if the blit mask is PIPE_MASK_ZS. Tested with piglit tests and added new piglit test arb_framebuffer_object-depth-stencil-blit to test this particular testcase. Reviewed-by: Brian Paul <[email protected]>
* svga: fix memory leak in svga_clear_texture()Neha Bhende2016-11-031-2/+7
| | | | | | | | | | | Piglit tests which uses arb_clear_texture extension, have memory leak issue. pipe_surface created in svga_clear_texture() was not deleted which happens to be the cause for memory leak. tested all arb_clear_texture-* piglit tests with valgrid. Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Charmaine Lee <[email protected]>
* svga: Implement the pipe clear_render_target functionality v2Thomas Hellstrom2016-11-034-1/+138
| | | | | | | | | | | v2: Accounted for the fact that svga_try_clear_render_target also honors conditional rendering. Testing done: Excercised all functions in a separate feature branch. Forced emission of conditional rendering commands when necessary. Signed-off-by: Thomas Hellstrom <[email protected]> Reviewed-by: Brian Paul <[email protected]>
* svga: add SVGA_3D_CMD_INVALIDATE_GB_SURFACE supportCharmaine Lee2016-11-032-0/+22
| | | | | | This command will be used in a subsequent patch to invalidate a surface. Reviewed-by: Brian Paul <[email protected]>
* pipe-loader: add libamd_common for radeonsiNicolai Hähnle2016-11-031-0/+1
| | | | | | | | | This fixes a build regression of commit 7115e56c21ace07cf04f5073ba73a533e2182099. Sorry for the breakage, this second location for link dependencies escaped my build tests. Bugzilla: https://patchwork.freedesktop.org/patch/119816/ Tested-by: Dieter Nützel <[email protected]>
* radeonsi: generate GS prolog to (partially) fix triangle strip adjacency ↵Nicolai Hähnle2016-11-036-4/+149
| | | | | | | | | | | | | | | | | | | | rotation Fixes GL45-CTS.geometry_shader.adjacency.adjacency_indiced_triangle_strip and others. This leaves the case of triangle strips with adjacency and primitive restarts open. It seems that the only thing that cares about that is a piglit test. Fixing this efficiently would be really involved, and I don't want to use the hammer of degrading to software handling of indices because there may well be software that uses this draw mode (without caring about the precise rotation of triangles). v2: - skip the GS prolog entirely if workaround is not needed - only check for TES (TES is always non-null when tessellation is used) Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: remove si_shader_context::is_gs_copy_shaderNicolai Hähnle2016-11-032-8/+4
| | | | | | It has become redundant. Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: make the GS copy shader owned by the GS selectorNicolai Hähnle2016-11-034-20/+31
| | | | | | | The copy shader only depends on the selector. This change avoids creating separate code paths for monolithic vs. non-monolithic geometry shaders. Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: si_shader_vs only depends on the GS selectorNicolai Hähnle2016-11-031-2/+2
| | | | Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: si_vgt_gs_mode only depends on the selectorNicolai Hähnle2016-11-031-3/+3
| | | | Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: make si_generate_gs_copy_shader usable as a standalone functionNicolai Hähnle2016-11-031-36/+43
| | | | | | It really only depends on the shader selector. Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: unify the si_compile_* functions for prologs and epilogsNicolai Hähnle2016-11-031-178/+61
| | | | Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: get rid of no_{prolog,epilog}Nicolai Hähnle2016-11-032-153/+80
| | | | Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: get rid of si_llvm_emit_fs_epilogueNicolai Hähnle2016-11-031-96/+1
| | | | | | It is no longer used. Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: get rid of get_interp_paramNicolai Hähnle2016-11-031-52/+2
| | | | | | Replace by a simple LLVMGetParam, since ctx->no_prolog is always false. Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: get rid of select_interp_paramNicolai Hähnle2016-11-031-41/+0
| | | | | | The condition !ctx->no_prolog is now always true. Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: use TCS epilog for monolithic shadersNicolai Hähnle2016-11-031-1/+21
| | | | | | | For fixed function TCS, we keep the copying of VS outputs to TES inputs inside the main function; the call to si_copy_tcs_inputs is moved accordingly. Reviewed-by: Marek Olšák <[email protected]>
* radeonsi: extract si_build_tcs_epilog_functionNicolai Hähnle2016-11-031-33/+46
| | | | Reviewed-by: Marek Olšák <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 01:55:08 +0000