aboutsummaryrefslogtreecommitdiffstats
path: root/src/gallium/include
Commit message (Collapse)AuthorAgeFilesLines
* llvmpipe: use MCJIT on ARM and AArch64Kyle McMartin2013-07-171-1/+8
| | | | | | | | MCJIT is the only supported LLVM JIT on AArch64 and ARM (the regular JIT has bit-rotted badly on ARM and doesn't exist on AArch64.) Signed-off-by: Kyle McMartin <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
* tgsi: rename the TGSI fragment kill opcodesBrian Paul2013-07-121-2/+2
| | | | | | | | | | | | | | | | | | | | | TGSI_OPCODE_KIL and KILP had confusing names. The former was conditional kill (if any src component < 0). The later was unconditional kill. At one time KILP was supposed to work with NV-style condition codes/predicates but we never had that in TGSI. This patch renames both opcodes: TGSI_OPCODE_KIL -> KILL_IF (kill if src.xyzw < 0) TGSI_OPCODE_KILP -> KILL (unconditional kill) Note: I didn't just transpose the opcode names to help ensure that I didn't miss updating any code anywhere. I believe I've updated all the relevant code and comments but I'm not 100% sure that some drivers had this right in the first place. For example, the radeon driver might have llvm.AMDGPU.kill and llvm.AMDGPU.kilp mixed up. Driver authors should review their code. Reviewed-by: Jose Fonseca <[email protected]>
* mesa,glsl,gallium: remove GLSLSkipStrictMaxVaryingLimitCheck and dependenciesMarek Olšák2013-07-021-1/+0
| | | | | | Not needed with do_dead_builtin_varyings. Reviewed-by: Ian Romanick <[email protected]>
* gallium: Fix llvmpipe on big-endian machinesAdam Jackson2013-06-241-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Squashed commit of the following: commit 0857a7e105bfcbc4d1431b2cc56612094c747ca3 Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:07 2013 -0400 gallivm: Fix lp_build_rgba8_to_fi32_soa for big endian Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit 0d65131649a8aa140e2db228ba779d685c4333e3 Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:07 2013 -0400 gallivm: Fix big-endian machines This adds a bit-shift count to the format table, and adds the concept of vector or bitwise alignment on gathers. Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit 9740bda9b7dc894b629ed38be9b51059ce90818f Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:07 2013 -0400 llvmpipe: Fix convert_to_blend_type on big-endian Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit ae037c2de0f029e4e99371c0de25560484f0d8df Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:06 2013 -0400 util: Convert color pack to packed formats This fixes them on big-endian. Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit 5b05ac0c89ae092ea8ba5bba9f739708d7396b5c Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:06 2013 -0400 graw-xlib: Convert to packed formats Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit 51396e7d098cb6ff794391cf11afe4dbf86dbea0 Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:06 2013 -0400 format: Convert to packed formats Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit 417b60bc66eb450e68a92ab0e47f76e292b385e6 Author: Adam Jackson <[email protected]> Date: Tue Jun 18 12:25:06 2013 -0400 st/dri: Convert to packed formats Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit 0934b2e022a5e0847d312c40734e2b44cac52fd8 Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:06 2013 -0400 st/xlib: Convert to packed formats Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit a307ea3c3716a706963acce7966b5e405ba11db9 Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:06 2013 -0400 gbm: Convert to packed formats Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit 53eebdd253e1960a645ea278f31d7ef6a6cf4aeb Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:06 2013 -0400 tests: Convert to packed formats Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit 2f77fe3ee524945eacd546efcac34f7799fb3124 Author: Adam Jackson <[email protected]> Date: Tue Jun 18 13:07:37 2013 -0400 gallium: Document packed formats Signed-off-by: Adam Jackson <[email protected]> commit 1f1017159ce951f922210a430de9229f91f62714 Author: Richard Sandiford <[email protected]> Date: Tue Jun 18 12:25:06 2013 -0400 gallium: Introduce 32-bit packed format names These are for interacting with buffers natively described in terms of bit shifts, like X11 visuals: uint32_t xyzw8888 = (x << 0) | (y << 8) | (z << 16) | (w << 24); Define these in terms of (endian-dependent) aliases to the array-style format names. Reviewed-by: Adam Jackson <[email protected]> Signed-off-by: Richard Sandiford <[email protected]> commit 6cc7ab1ee66ed668da78c1d951dfd7782b4e786a Author: Adam Jackson <[email protected]> Date: Mon Jun 3 12:10:32 2013 -0400 gallium: Document format name conventions v2: - Fix a channel name thinko (Michel Dänzer) - Elaborate on SCALED versus INT - Add links to DirectX and FOURCC docs Signed-off-by: Adam Jackson <[email protected]> commit df4d269e7fb62051a3c029b84147465001e5776e Author: Adam Jackson <[email protected]> Date: Tue Jun 18 12:25:06 2013 -0400 gallivm: Remove all notion of byte-swapping Signed-off-by: Adam Jackson <[email protected]> Signed-off-by: Adam Jackson <[email protected]>
* gallium: add condition parameter to render_conditionRoland Scheidegger2013-06-181-0/+2
| | | | | | | | | | | | | For conditional rendering this makes it possible to skip rendering if either the predicate is true or false, as supported by d3d10 (in fact previously it was sort of implied skip rendering if predicate is false for occlusion predicate, and true for so_overflow predicate). There's no cap bit for this as presumably all drivers could do it trivially (but this patch does not implement it for the drivers using true hw predicates, nvxx, r600, radeonsi, no change is expected for OpenGL functionality). Reviewed-by: Jose Fonseca <[email protected]>
* gallium/draw: add limits to the clip and cull distancesZack Rusin2013-06-131-0/+2
| | | | | | | | | | | There are strict limits on those registers. Define the maximums and use them instead of magic numbers. Also allows us to add some extra sanity checks. Suggested by Brian. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: Roland Scheidegger <[email protected]> Reviewed-by: Jose Fonseca <[email protected]>
* gallium: add a cull distance semanticZack Rusin2013-06-101-1/+2
| | | | | | | | | | | | | cull distance is analogous to clip distance. If a register is given this semantic, then the values in it are assumed to be a float32 distance to a plane. Primitives will be completely discarded if the plane distance for all of the vertices in the primitive are < 0. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: Jose Fonseca <[email protected]> Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Roland Scheidegger <[email protected]>
* gallium: System z supportRichard Sandiford2013-06-051-1/+5
| | | | | | | | | The main change is to use MCJIT rather than the old JIT, which will never be supported for System z. The endianness part is by example since the patch was tested on a glibc system. Signed-off-by: Richard Sandiford <[email protected]> Signed-off-by: Brian Paul <[email protected]>
* gallium: add support for layered renderingRoland Scheidegger2013-06-011-1/+2
| | | | | | | | | | Since pipe_surface already has all the necessary fields no interface changes are necessary except adding a new shader semantic value (TGSI_SEMANTIC_LAYER). (Note that what GL knows as "gl_Layer" variable d3d10 is naming "RENDER_TARGET_ARRAY_INDEX".) v2: drop cap bit (just tied to geometry shader), add docs.
* gallium: Add support for multiple viewportsZack Rusin2013-05-254-6/+13
| | | | | | | | | | | | Gallium supported only a single viewport/scissor combination. This commit changes the interface to allow us to add support for multiple viewports/scissors. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: Marek Olšák <[email protected]> Reviewed-by: José Fonseca<[email protected]> Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Roland Scheidegger <[email protected]>
* gallium: add PIPE_CAP_MAX_TEXTURE_BUFFER_SIZE for GLMarek Olšák2013-05-111-1/+2
| | | | | | v2: fix typo 65535 -> 65536 Reviewed-by: Brian Paul <[email protected]>
* gallium: fix type of flags in pipe_context::flush()Chia-I Wu2013-05-041-1/+3
| | | | | | | | | | | | | | | | It should be unsigned, not enum pipe_flush_flags. Fixed a build error: src/gallium/state_trackers/egl/android/native_android.cpp:426:29: error: invalid conversion from 'int' to 'pipe_flush_flags' [-fpermissive] v2: replace all occurrences of enum pipe_flush_flags by unsigned Signed-off-by: Chia-I Wu <[email protected]> Reviewed-by: Marek Olšák <[email protected]> [olv: document the parameter now that the type is unsigned]
* draw/pt: adjust overflow calculationsZack Rusin2013-05-031-0/+7
| | | | | | | | | gallium lies. buffer_size is not actually buffer_size but available size, which is 'buffer_size - buffer_offset' so by adding buffer offset we'd incorrectly compute overflow. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: José Fonseca <[email protected]>
* gallium: increase the number of available stream output declsZack Rusin2013-04-261-1/+2
| | | | | | | | | | There can be more stream output decls than shader outputs because individual components from them can be split and distributed among different so buffers. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: José Fonseca <[email protected]> Reviewed-by: Roland Scheidegger <[email protected]>
* gallium: Replace gl_rasterization_rules with lower_left_origin and ↵José Fonseca2013-04-231-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | half_pixel_center. Squashed commit of the following: commit 04c5fa2cbb8e89d6f2fa5a75af1cca03b1f6b852 Author: José Fonseca <[email protected]> Date: Tue Apr 23 17:37:18 2013 +0100 gallium: s/lower_left_origin/bottom_edge_rule/ commit 4dff4f64fa83b9737def136fffd161d55e4f1722 Author: José Fonseca <[email protected]> Date: Tue Apr 23 17:35:04 2013 +0100 gallium: Move diagram to docs. commit 442a63012c8c3c3797f45e03f2ca20ad5f399832 Author: James Benton <[email protected]> Date: Fri May 11 17:50:55 2012 +0100 gallium: Replace gl_rasterization_rules with lower_left_origin and half_pixel_center. This change is necessary to achieve correct results when using OpenGL FBOs. Reviewed-by: Marek Olšák <[email protected]>
* gallium: Add a new clip_halfz rasterizer state.José Fonseca2013-04-221-0/+6
| | | | | | gl_rasterization_rules lumps too many different flags. Reviewed-by: Brian Paul <[email protected]>
* gallium: handle drirc disable_glsl_line_continuations optionVadim Girlin2013-04-191-0/+1
| | | | | | | | NOTE: This is a candidate for the 9.1 branch Signed-off-by: Vadim Girlin <[email protected]> Reviewed-by: Ian Romanick <[email protected]> Reviewed-by: Alex Deucher <[email protected]>
* st/mesa: optionally apply texture swizzle to border color v2Christoph Bumiller2013-04-181-1/+6
| | | | | | | | | | | | This is the only sane solution for nv50 and nvc0 (really, trust me), but since on other hardware the border colour is tightly coupled with texture state they'd have to undo the swizzle, so I've added a cap. The dependency of update_sampler on the texture updates was introduced to avoid doing the apply_depthmode to the swizzle twice. v2: Moved swizzling helper to u_format.c, extended the CAP to provide more accurate information.
* gallium: Disambiguate TGSI_OPCODE_IF.José Fonseca2013-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TGSI_OPCODE_IF condition had two possible interpretations: - src.x != 0.0f - Mesa statetracker when PIPE_SHADER_CAP_INTEGERS was false either for vertex and fragment shaders - gallivm/llvmpipe - postprocess - vl state tracker - vega state tracker - most old drivers - old internal state trackers - many graw examples - src.x != 0U - Mesa statetracker when PIPE_SHADER_CAP_INTEGERS was true for both vertex and fragment shaders - tgsi_exec/softpipe - r600 - radeonsi - nv50 And drivers that use draw module also were a mess (because Mesa would emit float IFs, but draw module supports native integers so it would interpret IF arg as integers...) This sort of works if the source argument is limited to float +0.0f or +1.0f, integer 0, but would fail if source is float -0.0f, or integer in the float NaN range. It could also fail if source is integer 1, and hardware flushes denormalized numbers to zero. But with this change there are now two opcodes, IF and UIF, with clear meaning. Drivers that do not support native integers do not need to worry about UIF. However, for backwards compatibility with old state trackers and examples, it is advisable that native integer capable drivers also support the float IF opcode. I tried to implement this for r600 and radeonsi based on the surrounding code. I couldn't do this for nouveau, so I just shunted IF/UIF together, which matches the current behavior. Reviewed-by: Roland Scheidegger <[email protected]> Reviewed-by: Marek Olšák <[email protected]> v2: - Incorporate Roland's feedback. - Fix r600_shader.c merge conflict. - Fix typo in radeon, spotted by Michel Dänzer. - Incorporte Christoph Bumiller's patch to handle TGSI_OPCODE_IF(float) properly in nv50/ir.
* gallium: Eliminate TGSI_OPCODE_IFC.José Fonseca2013-04-171-1/+1
| | | | | | Never used or implemented. Reviewed-by: Roland Scheidegger <[email protected]>
* gallium: add get_sample_position interfaceDave Airlie2013-04-111-0/+13
| | | | | | | This is to be used to implement glGet GL_SAMPLE_POSITION. Reviewed-by: Marek Olšák <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
* Avoid spurious GCC warnings in STATIC_ASSERT() macro.Paul Berry2013-04-041-1/+1
| | | | | | | | | | | | | GCC 4.8 now warns about typedefs that are local to a scope and not used anywhere within that scope. This produced spurious warnings with the STATIC_ASSERT() macro (which used a typedef to provoke a compile error in the event of an assertion failure). This patch switches to a simpler technique that avoids the warning. v2: Avoid GCC-specific syntax. Also update p_compiler.h. Reviewed-by: Kenneth Graunke <[email protected]>
* gallium: add PIPE_CAP_QUERY_PIPELINE_STATISTICSChristoph Bumiller2013-04-031-1/+2
| | | | Reviewed-by: Marek Olšák <[email protected]>
* gallium: add interface for driver queries like performance counters, etc.Marek Olšák2013-03-262-0/+23
| | | | | | | The pipe query interface is reused. The list of available queries can be obtained using pipe_screen::get_driver_query_info. Reviewed-by: Brian Paul <[email protected]>
* gallium,st/mesa: don't use blit-based transfers with software rasterizersMarek Olšák2013-03-231-1/+2
| | | | | | | | | The blit-based paths for TexImage, GetTexImage, and ReadPixels aren't very fast with software rasterizer. Now Gallium drivers have the ability to turn them off. Reviewed-by: Brian Paul <[email protected]> Tested-by: Brian Paul <[email protected]>
* gallium: add TGSI_SEMANTIC_TEXCOORD,PCOORD v3Christoph Bumiller2013-03-203-3/+6
| | | | | | | | | | | | | | | This makes it possible to identify gl_TexCoord and gl_PointCoord for drivers where sprite coordinate replacement is restricted. The new PIPE_CAP_TGSI_TEXCOORD decides whether these varyings should be hidden behind the GENERIC semantic or not. With this patch only nvc0 and nv30 will request that they be used. v2: introduce a CAP so other drivers don't have to bother with the new semantic v3: adapt to introduction gl_varying_slot enum
* tgsi: use separate structure for indirect address v2Christian König2013-03-191-6/+18
| | | | | | | | | | | | | | To further improve the optimization of source and destination indirect addressing we need the ability to store a reference to the declaration of the addressed operands. Since most of the fields in tgsi_src_register doesn't apply for an indirect addressing operand replace it with a separate tgsi_ind_register structure and so make room for extra information. v2: rename Declaration to ArrayID, put the ArrayID into () instead of [] Signed-off-by: Christian König <[email protected]>
* tgsi: add ArrayID to declarationsChristian König2013-03-191-1/+7
| | | | | | | | Remember which declarations are declared as "arrays" and so can be indirectly addressed. ArrayIDs start at 1, cause for compatibility reasons zero is treaded as no array present. Signed-off-by: Christian König <[email protected]>
* tgsi: remove TGSI_FILE_(IMMEDIATE|TEMP)_ARRAYChristian König2013-03-191-4/+2
| | | | | | Nobody seems to be using it, and only nv50 had a partial implementation. Signed-off-by: Christian König <[email protected]>
* mesa,gallium,egl,mapi: One definition of C99 inline/__func__ to rule them all.José Fonseca2013-03-121-69/+5
| | | | | | | | We were in four already... NOTE: Candidate for the stable branches. Reviewed-by: Brian Paul <[email protected]>
* gallium: add red-alpha texture formats and a couple of util functionsMarek Olšák2013-02-131-0/+12
| | | | | | | | | This is for glGetTexImage and it will be used for samplers only (which some drivers already implement by reading util_format_description). v2: incorporate Brian's suggestion Reviewed-by: Brian Paul <[email protected]>
* gallium: add RGBX formats for existing GL RGB texture formatsMarek Olšák2013-02-071-0/+14
| | | | Reviewed-by: Brian Paul <[email protected]>
* gallium: add SQRT shader opcodeBrian Paul2013-02-042-2/+3
| | | | | | | | | | | | | | | | | | The glsl-to-tgsi translater will emit SQRT to implement GLSL's sqrt() and distance() functions if the PIPE_SHADER_CAP_TGSI_SQRT_SUPPORTED query says it's supported by the driver. Otherwise, sqrt(x) is implemented with x*rsq(x). The problem with this is sqrt(0) must be handled specially because rsq(0) might be Inf/NaN/undefined (and then 0*rsq(0) is Inf/Nan/undefined). In the glsl-to-tgsi code we use an extra CMP to check if x is zero and then replace the result of x*rsq(x) with zero. In the end, this makes sqrt() generate much more reasonable code for drivers that can do square roots. Note that many of piglit's generated shader tests use the GLSL distance() function.
* gallium: add PIPE_CAP_TEXTURE_BUFFER_OFFSET_ALIGNMENTChristoph Bumiller2013-01-301-1/+2
| | | | Reviewed-by: Brian Paul <[email protected]>
* gallium: remove PIPE_CAP_DEPTHSTENCIL_CLEAR_SEPARATEMarek Olšák2013-01-151-1/+0
| | | | Reviewed-by: Brian Paul <[email protected]>
* gallium: extend pipe_context::flush for it to accept an END_OF_FRAME flagMarek Olšák2013-01-043-2/+11
| | | | | | | | | | | | | | | | | Usage with pipe_context: pipe->flush(pipe, NULL, PIPE_FLUSH_END_OF_FRAME); Usage with st_context_iface: st->flush(st, ST_FLUSH_END_OF_FRAME, NULL); The flag is only a hint for drivers. Radeon will use it for buffer eviction heuristics in the kernel (e.g. for queries like how many frames have passed since a buffer was used). The flag is currently only generated by st/dri on SwapBuffers. Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Stéphane Marchesin <[email protected]>
* gallium: s/PIPE_CAP_TIMER_QUERY/PIPE_CAP_QUERY_TIME_ELAPSED/José Fonseca2012-12-201-1/+1
| | | | | | | | To better reflect what it is being advertised. Reviewed-by: Dave Airlie <[email protected]> Reviewed-by: Marek Olšák <[email protected]> Reviewed-by: Brian Paul <[email protected]>
* gallium: remove pipe_surface::usageMarek Olšák2012-12-121-1/+0
| | | | | | Not really used by anybody now. Reviewed-by: Brian Paul <[email protected]>
* gallium: add new texture buffer object capabilityDave Airlie2012-12-081-1/+2
| | | | | | this just adds the define to the header. Signed-off-by: Dave Airlie <[email protected]>
* gallium: pass the current context to the flush_front state tracker functionMarek Olšák2012-12-071-1/+4
| | | | | | I will later use the context to resolve an MSAA front buffer. Reviewed-by: Brian Paul <[email protected]>
* gallium/postprocess: share pipe_context and cso_context with the state trackerMarek Olšák2012-11-291-0/+11
| | | | | | | Using one context instead of two is more efficient and we can skip another context flush. Reviewed-by: Brian Paul <[email protected]>
* st/mesa: allow forward-compatible contexts and set Const.ContextFlagsMarek Olšák2012-11-291-2/+1
| | | | | Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Ian Romanick <[email protected]>
* gallium: fix some function comments in p_context.hDmitry Cherkassov2012-11-151-3/+2
| | | | | Signed-off-by: Dmitry Cherkassov <[email protected]> Reviewed-by: Brian Paul <[email protected]>
* gallium: add defines/shader opcode for texture cube map arrayDave Airlie2012-11-092-4/+13
| | | | | | | | | | | | | | | | This just adds the texture target and capability along with 3 new opcodes required to support this extension. As this extension requires some texture opcodes with samp + 5 args, we need to use another src register, this is only required for TEX, TXL and TXB opcodes to implement this spec. TEX2 is required for shadow cube map arrays TXL2 is required for cube map array sampler + explicit lod TXB2 is required for cube map array sampler + lod bias Reviewed-by: Brian Paul <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
* gallium: expose ARB_map_buffer_alignment on RadeonMarek Olšák2012-10-311-1/+2
| | | | | | | | Reviewed-by: Brian Paul <[email protected]> v2: update relnotes-9.1 v3: use align_malloc and align_free for malloced buffers in r300g v4: document the new CAP in the docs
* gallium: add start_slot parameter to set_vertex_buffersMarek Olšák2012-10-311-0/+1
| | | | | | | | | | | | | | | | | | | | | This allows updating only a subrange of buffer bindings. set_vertex_buffers(pipe, start_slot, count, NULL) unbinds buffers in that range. Binding NULL resources unbinds buffers too (both buffer and user_buffer must be NULL). The meta ops are adapted to only save, change, and restore the single slot they use. The cso_context can save and restore only one vertex buffer slot. The clients can query which one it is using cso_get_aux_vertex_buffer_slot. It's currently set to 0. (the Draw module breaks if it's set to non-zero) It should decrease the CPU overhead when using a lot of meta ops, but the drivers must be able to treat each vertex buffer slot as a separate state (only r600g does so at the moment). I can imagine this also being useful for optimizing some OpenGL use cases. Reviewed-by: Brian Paul <[email protected]>
* mesa: bump MAX_VARYING to 32Marek Olšák2012-10-291-2/+2
| | | | | | | | | | | | | | | | | We're starting to get apps utilizing more than 16 varyings and most current hardware supports 32 anyway. Tested with r600g. swrast, softpipe and llvmpipe still advertise 16 varyings. This fixes a WebGL crash after launching this demo: https://developer.mozilla.org/en-US/demos/detail/falling-cubes Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54402 NOTE: This is a candidate for the stable branches. Acked-by: Kenneth Graunke <[email protected]>
* gallium: remove unused data pointer from pipe_transferMarek Olšák2012-10-181-1/+0
| | | | Reviewed-by: Brian Paul <[email protected]>
* gallium: unify transfer functionsMarek Olšák2012-10-112-19/+18
| | | | | | | | | | | | | | "get_transfer + transfer_map" becomes "transfer_map". "transfer_unmap + transfer_destroy" becomes "transfer_unmap". transfer_map must create and return the transfer object and transfer_unmap must destroy it. transfer_map is successful if the returned buffer pointer is not NULL. If transfer_map fails, the pointer to the transfer object remains unchanged (i.e. doesn't have to be NULL). Acked-by: Brian Paul <[email protected]>
* gallium: remove resource_resolveMarek Olšák2012-09-302-34/+1
| | | | | | | The functionality is provided by the new blit function. Tested-by: Michel Dänzer <[email protected]> Reviewed-by: Brian Paul <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 17:41:35 +0000