summaryrefslogtreecommitdiffstats
path: root/src/gallium/drivers/svga
Commit message (Collapse)AuthorAgeFilesLines
* gallium: add flush_resource context functionMarek Olšák2013-09-201-0/+8
| | | | | | | | | r600g needs explicit flushing before DRI2 buffers are presented on the screen. v2: add (stub) implementations for all drivers, fix frontbuffer flushing v3: fix galahad Signed-off-by: Marek Olšák <[email protected]>
* svga: replace 0 with PIPE_OK in a few placesBrian Paul2013-08-263-5/+5
|
* svga: minor clean-ups in emit_hw_vs_vdecl()Brian Paul2013-08-211-6/+6
|
* draw: inject frontface info into wireframe outputsZack Rusin2013-08-021-0/+1
| | | | | | | | | | | | | | Draw module can decompose primitives into wireframe models, which is a fancy word for 'lines', unfortunately that decomposition means that we weren't able to preserve the original front-face info which could be derived from the original primitives (lines don't have a 'face'). To fix it allow draw module to inject a fake face semantic into outputs from which the backends can figure out the original frontfacing info of the primitives. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: Roland Scheidegger <[email protected]> Reviewed-by: Jose Fonseca <[email protected]>
* gallium: Add PIPE_CAP_ENDIANNESSTom Stellard2013-07-221-0/+2
| | | | | | Cc: [email protected] [ Francisco Jerez: Fix "PIPE_ENDIAN_SMALL" in the documentation, define PIPE_ENDIAN_NATIVE. ]
* tgsi: rename the TGSI fragment kill opcodesBrian Paul2013-07-121-9/+9
| | | | | | | | | | | | | | | | | | | | | TGSI_OPCODE_KIL and KILP had confusing names. The former was conditional kill (if any src component < 0). The later was unconditional kill. At one time KILP was supposed to work with NV-style condition codes/predicates but we never had that in TGSI. This patch renames both opcodes: TGSI_OPCODE_KIL -> KILL_IF (kill if src.xyzw < 0) TGSI_OPCODE_KILP -> KILL (unconditional kill) Note: I didn't just transpose the opcode names to help ensure that I didn't miss updating any code anywhere. I believe I've updated all the relevant code and comments but I'm not 100% sure that some drivers had this right in the first place. For example, the radeon driver might have llvm.AMDGPU.kill and llvm.AMDGPU.kilp mixed up. Driver authors should review their code. Reviewed-by: Jose Fonseca <[email protected]>
* mesa,glsl,gallium: remove GLSLSkipStrictMaxVaryingLimitCheck and dependenciesMarek Olšák2013-07-021-1/+0
| | | | | | Not needed with do_dead_builtin_varyings. Reviewed-by: Ian Romanick <[email protected]>
* svga: pass svga_compile_key by reference instead of valueBrian Paul2013-06-281-7/+7
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* svga: use switch statement in svga_shader_type()Brian Paul2013-06-281-5/+10
| | | | | | | Safer in case the PIPE_SHADER_x tokens get renumbered (as Marek wanted to do). Reviewed-by: Jose Fonseca <[email protected]>
* svga: allow 3D transfers in svga_texture_transfer_map()Brian Paul2013-06-251-4/+3
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* svga: use new svga_define_texture_level() helperBrian Paul2013-06-252-2/+15
| | | | | | To get array bounds checking. Reviewed-by: Jose Fonseca <[email protected]>
* svga: fix layer/level mix-up in svga_mark_surface_dirty()Brian Paul2013-06-251-1/+1
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* svga: use new svga_age_texture_view() helperBrian Paul2013-06-252-1/+14
| | | | | | | | | The function does array bounds checking. Note, this exposes a bug in the svga_mark_surface_dirty() function: we're calling svga_age_texture_view() with a texture slice instead of mipmap level. This can lead to a failed assertion. That'll be fixed next. Reviewed-by: Jose Fonseca <[email protected]>
* svga: add array index assertion in svga_validate_sampler_view()Brian Paul2013-06-251-0/+1
|
* svga: use svga_texture() helper instead of castingBrian Paul2013-06-251-1/+1
|
* svga: minor cleanups, comments in svga_tgsi_insn.cBrian Paul2013-06-221-8/+19
|
* svga: add null ptr check in svga_get_tex_sampler_view()Brian Paul2013-06-221-0/+3
| | | | Trivial.
* svga: add some comments about primitive conversionBrian Paul2013-06-192-11/+26
| | | | | | | And clean up the svga_translate_prim() function with better variable names. Reviewed-by: Jose Fonseca <[email protected]>
* svga: reindent svga_tgsi.cBrian Paul2013-06-191-63/+65
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* svga: whitespace, comment, formatting fixes in svga_tgsi_emit.hBrian Paul2013-06-191-42/+56
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* svga: move some svga/tgsi functionsBrian Paul2013-06-193-125/+149
| | | | | | | | Move some functions from the svga_tgsi_insn.h header into the svga_tgsi_insn.c file since they're only used there. Plus, add comments and fix formatting. Reviewed-by: Jose Fonseca <[email protected]>
* svga: formatting fixes in svga_tgsi_insn.cBrian Paul2013-06-191-260/+395
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* gallium: add condition parameter to render_conditionRoland Scheidegger2013-06-181-1/+1
| | | | | | | | | | | | | For conditional rendering this makes it possible to skip rendering if either the predicate is true or false, as supported by d3d10 (in fact previously it was sort of implied skip rendering if predicate is false for occlusion predicate, and true for so_overflow predicate). There's no cap bit for this as presumably all drivers could do it trivially (but this patch does not implement it for the drivers using true hw predicates, nvxx, r600, radeonsi, no change is expected for OpenGL functionality). Reviewed-by: Jose Fonseca <[email protected]>
* svga: add PIPE_CAP_MAX_VIEWPORTS to switch to silence warningBrian Paul2013-05-291-0/+2
|
* gallium: Add support for multiple viewportsZack Rusin2013-05-252-9/+13
| | | | | | | | | | | | Gallium supported only a single viewport/scissor combination. This commit changes the interface to allow us to add support for multiple viewports/scissors. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: Marek Olšák <[email protected]> Reviewed-by: José Fonseca<[email protected]> Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Roland Scheidegger <[email protected]>
* draw: try to prevent overflows on index buffersZack Rusin2013-05-141-2/+2
| | | | | | | | | | | | Pass in the size of the index buffer, when available, and use it to handle out of bounds conditions. The behavior in the case of an overflow needs to be the same as with other overflows in the vertex processing pipeline meaning that a vertex should still be generated but all attributes in it set to zero. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: José Fonseca <[email protected]> Reviewed-by: Roland Scheidegger <[email protected]>
* draw: don't crash on vertex buffer overflowZack Rusin2013-05-141-2/+2
| | | | | | | | | | | | | | We would crash when stride was bigger than the size of the buffer. The correct behavior is to just fetch zero's in this case. Unfortunatly with user_buffer's there's no way to validate the size because currently we're just not getting it. Adjust the draw interface to pass the size along the mapped buffer, which works perfectly for buffer backed vertex_buffers and, in future, it will allow us to plumb user_buffer sizes through the same interface. Signed-off-by: Zack Rusin <[email protected]> Reviewed-by: José Fonseca <[email protected]> Reviewed-by: Roland Scheidegger <[email protected]>
* gallium: add PIPE_CAP_MAX_TEXTURE_BUFFER_SIZE for GLMarek Olšák2013-05-111-0/+1
| | | | | | v2: fix typo 65535 -> 65536 Reviewed-by: Brian Paul <[email protected]>
* svga: misc whitespace and comment fixes in svga_cmd.cBrian Paul2013-05-091-82/+82
|
* gallium: fix type of flags in pipe_context::flush()Chia-I Wu2013-05-041-1/+1
| | | | | | | | | | | | | | | | It should be unsigned, not enum pipe_flush_flags. Fixed a build error: src/gallium/state_trackers/egl/android/native_android.cpp:426:29: error: invalid conversion from 'int' to 'pipe_flush_flags' [-fpermissive] v2: replace all occurrences of enum pipe_flush_flags by unsigned Signed-off-by: Chia-I Wu <[email protected]> Reviewed-by: Marek Olšák <[email protected]> [olv: document the parameter now that the type is unsigned]
* scons: Support clang.José Fonseca2013-04-251-1/+1
| | | | | | | | | | | clang is supports most gcc options / extensions, with a some exceptions. The biggest advantage of using clang is that compilation times are much short. One can tell scons to use clang when building by invoking it as CC=clang CXX=clang++ scons libgl-xlib
* scons: Remove redundant code.José Fonseca2013-04-251-3/+0
| | | | -fvisibility=hidden is already elsewhere for the whole tree.
* gallium: Replace gl_rasterization_rules with lower_left_origin and ↵José Fonseca2013-04-232-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | half_pixel_center. Squashed commit of the following: commit 04c5fa2cbb8e89d6f2fa5a75af1cca03b1f6b852 Author: José Fonseca <[email protected]> Date: Tue Apr 23 17:37:18 2013 +0100 gallium: s/lower_left_origin/bottom_edge_rule/ commit 4dff4f64fa83b9737def136fffd161d55e4f1722 Author: José Fonseca <[email protected]> Date: Tue Apr 23 17:35:04 2013 +0100 gallium: Move diagram to docs. commit 442a63012c8c3c3797f45e03f2ca20ad5f399832 Author: James Benton <[email protected]> Date: Fri May 11 17:50:55 2012 +0100 gallium: Replace gl_rasterization_rules with lower_left_origin and half_pixel_center. This change is necessary to achieve correct results when using OpenGL FBOs. Reviewed-by: Marek Olšák <[email protected]>
* svga: remove TGSI_OPCODE_BREAKC instruction translationRoland Scheidegger2013-04-201-1/+0
| | | | | | | While initially that opcode probably was meant for something along the lines of sm3 break_comp it has never worked that way (not even the argument count was right) and now the opcode has quite different semantics so just remove it. (Discovered by Jose Fonseca)
* svga: whitespace, comment fixes in svga_pipe_query.cBrian Paul2013-04-191-41/+49
|
* svga: whitespace, comment fixes in svga_pipe_fs/vs.cBrian Paul2013-04-192-48/+41
|
* st/mesa: optionally apply texture swizzle to border color v2Christoph Bumiller2013-04-181-0/+2
| | | | | | | | | | | | This is the only sane solution for nv50 and nvc0 (really, trust me), but since on other hardware the border colour is tightly coupled with texture state they'd have to undo the swizzle, so I've added a cap. The dependency of update_sampler on the texture updates was introduced to avoid doing the apply_depthmode to the swizzle twice. v2: Moved swizzling helper to u_format.c, extended the CAP to provide more accurate information.
* svga: add new memory-used HUD queryBrian Paul2013-04-038-1/+33
| | | | | | | To track the amount of memory used by all pipe_resources (textures and buffers). Reviewed-by: Jose Fonseca <[email protected]>
* svga: add HUD queries for number of draw calls, number of fallbacksBrian Paul2013-04-034-0/+61
| | | | | | | The fallbacks count is the number of drawing calls that use a "draw" module fallback, such as polygon stipple. Reviewed-by: Jose Fonseca <[email protected]>
* svga: refactor occlusion query codeBrian Paul2013-04-031-94/+124
| | | | | | This is in preparation for adding new query types for the HUD. Reviewed-by: Jose Fonseca <[email protected]>
* svga: add case for PIPE_CAP_QUERY_PIPELINE_STATISTICSBrian Paul2013-04-031-0/+1
|
* llvmpipe: put .bmp extension on dumped image filesBrian Paul2013-03-281-2/+2
|
* gallium,st/mesa: don't use blit-based transfers with software rasterizersMarek Olšák2013-03-231-0/+3
| | | | | | | | | The blit-based paths for TexImage, GetTexImage, and ReadPixels aren't very fast with software rasterizer. Now Gallium drivers have the ability to turn them off. Reviewed-by: Brian Paul <[email protected]> Tested-by: Brian Paul <[email protected]>
* gallium: add TGSI_SEMANTIC_TEXCOORD,PCOORD v3Christoph Bumiller2013-03-201-0/+2
| | | | | | | | | | | | | | | This makes it possible to identify gl_TexCoord and gl_PointCoord for drivers where sprite coordinate replacement is restricted. The new PIPE_CAP_TGSI_TEXCOORD decides whether these varyings should be hidden behind the GENERIC semantic or not. With this patch only nvc0 and nv30 will request that they be used. v2: introduce a CAP so other drivers don't have to bother with the new semantic v3: adapt to introduction gl_varying_slot enum
* gallium/build: Fix visibility CFLAGS in automakeMaarten Lankhorst2013-03-161-0/+2
| | | | | | | | | | | v2: Andreas Boll <[email protected]> - Fix formatting - use one CFLAG per line NOTE: This is a candidate for the 9.1 branch. Signed-off-by: Maarten Lankhorst <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59238 Reviewed-by: Andreas Boll <[email protected]>
* svga: fix comment typosBrian Paul2013-02-261-1/+1
|
* svga: remove some extraneous whitespaceBrian Paul2013-02-231-8/+0
|
* svga: fix sRGB renderingBrian Paul2013-02-051-0/+11
| | | | | | | | | | | We weren't emitting the SVGA_RS_OUTPUTGAMMA state so sRGB rendering didn't work properly. Fixes piglit's framebuffer-srgb test. Note: This is a candidate for the stable branches. Reviewed-by: Jose Fonseca <[email protected]>
* gallium/drivers: handle PIPE_SHADER_CAP_TGSI_SQRT_SUPPORTED queryBrian Paul2013-02-041-0/+4
| | | | Initially, only softpipe/llvmpipe support SQRT.
* gallium: handle unhandled PIPE_CAP_TEXTURE_BUFFER_OFFSET_ALIGNMENTAndreas Boll2013-02-041-0/+1
| | | | | | Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=60098 Signed-off-by: Brian Paul <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 13:19:48 +0000