aboutsummaryrefslogtreecommitdiffstats
path: root/src/gallium/auxiliary/nir
Commit message (Collapse)AuthorAgeFilesLines
...
* nir: Rework conversion opcodesJason Ekstrand2017-03-141-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | The NIR story on conversion opcodes is a mess. We've had way too many of them, naming is inconsistent, and which ones have explicit sizes was sort-of random. This commit re-organizes things and makes them all consistent: - All non-bool conversion opcodes now have the explicit size in the destination and are named <src_type>2<dst_type><size>. - Integer <-> integer conversion opcodes now only come in i2i and u2u forms (i2u and u2i have been removed) since the only difference between the different integer conversions is whether or not they sign-extend when up-converting. - Boolean conversion opcodes all have the explicit size on the bool and are named <src_type>2<dst_type>. Making things consistent also allows nir_type_conversion_op to be moved to nir_opcodes.c and auto-generated using mako. This will make adding int8, int16, and float16 versions much easier when the time comes. Reviewed-by: Eric Anholt <[email protected]>
* gallium: remove TGSI_OPCODE_CLAMPMarek Olšák2017-02-181-11/+0
| | | | | | | Not used and not widely supported. Use MIN+MAX instead. Reviewed-by: Dave Airlie <[email protected]> Reviewed-by: Nicolai Hähnle <[email protected]>
* gallium: remove TGSI_OPCODE_SUBMarek Olšák2017-01-051-1/+0
| | | | | | It's redundant with the source modifier. Reviewed-by: Nicolai Hähnle <[email protected]>
* gallium: remove TGSI_OPCODE_ABSMarek Olšák2017-01-051-1/+0
| | | | | | It's redundant with the source modifier. Reviewed-by: Nicolai Hähnle <[email protected]>
* ttn: set ->info->num_ubosRob Clark2016-12-271-1/+4
| | | | | | | | | For dealing w/ 32b vs 64b gpu addresses, I need to rework how we pass UBO buffer addresses to shader, and knowing up front the # of UBOs is useful. But I noticed ttn wasn't setting this. Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* ttn: handle GLSL_SAMPLER_DIM_SUBPASS_MS caseJuan A. Suarez Romero2016-12-211-0/+1
| | | | | | Fixes a warning. Reviewed-by: Samuel Iglesias Gonsálvez <[email protected]>
* treewide: s/comparitor/comparator/Ilia Mirkin2016-12-121-1/+1
| | | | | | | | | | git grep -l comparitor | xargs sed -i 's/comparitor/comparator/g' Just happened to notice this in a patch that was sent and included one of the tokens in question. Signed-off-by: Ilia Mirkin <[email protected]> Acked-by: Nicolai Hähnle <[email protected]>
* nir/i965/anv/radv/gallium: make shader info a pointerTimothy Arceri2016-10-261-5/+5
| | | | | | | | | | When restoring something from shader cache we won't have and don't want to create a nir_shader this change detaches the two. There are other advantages such as being able to reuse the shader info populated by GLSL IR. Reviewed-by: Jason Ekstrand <[email protected]>
* ttn: fix warning after 7bf76563eRob Clark2016-09-161-0/+2
| | | | Signed-off-by: Rob Clark <[email protected]>
* gallium/ttn: Remove duplicated TGSI_OPCODE_DP2A initializationRhys Kidd2016-08-241-1/+0
| | | | | | | | | Duplicate line is currently on 1535. Identified by Clang, when run through Eric Anholt's Travis harness. Signed-off-by: Rhys Kidd <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* ttn: Use nir_load_front_face instead of the TGSI-style input.Eric Anholt2016-08-191-3/+27
| | | | | | | This reduces the diff between GLSL-to-NIR and TGSI-to-NIR, and gives NIR more optimization to work on. Reviewed-by: Kenneth Graunke <[email protected]>
* ttn: Make FRAG_RESULT_DEPTH be a float variable to match gtn and ptn.Eric Anholt2016-08-191-3/+16
| | | | | | | This lets TTN-using drivers handle FRAG_RESULT_DEPTH the same between all their source paths. Reviewed-by: Rob Clark <[email protected]>
* ttn: Update shader->info as we generate code.Eric Anholt2016-07-261-0/+13
| | | | | | | We could use the nir_shader_gather_info() pass to update it after the fact, but this is what glsl_to_nir and prog_to_nir do. Reviewed-by: Rob Clark <[email protected]>
* compiler: Rename INTERP_QUALIFIER_* to INTERP_MODE_*.Kenneth Graunke2016-07-171-3/+3
| | | | | | | | | | | | | | | | | Likewise, rename the enum type to glsl_interp_mode. Beyond the GLSL front-end, talking about "interpolation modes" seems more natural than "interpolation qualifiers" - in the IR, we're removed from how exactly the source language specifies how to interpolate an input. Also, SPIR-V calls these "decorations" rather than "qualifiers". Generated by: $ find . -regextype egrep -regex '.*\.(c|cpp|h)' -type f -exec sed -i \ -e 's/INTERP_QUALIFIER_/INTERP_MODE_/g' \ -e 's/glsl_interp_qualifier/glsl_interp_mode/g' {} \; Signed-off-by: Kenneth Graunke <[email protected]> Acked-by: Dave Airlie <[email protected]>
* gallium: use PIPE_SHADER_* everywhere, remove TGSI_PROCESSOR_*Marek Olšák2016-04-221-8/+8
| | | | Acked-by: Jose Fonseca <[email protected]>
* nir: add bit_size info to nir_load_const_instr_create()Samuel Iglesias Gonsálvez2016-04-111-1/+1
| | | | Reviewed-by: Jason Ekstrand <[email protected]>
* ttn: remove stray global from headerRob Clark2016-03-241-2/+0
| | | | Signed-off-by: Rob Clark <[email protected]>
* nir: add a bit_size parameter to nir_ssa_dest_initConnor Abbott2016-03-171-7/+7
| | | | | | | | | | | | | | | | | | | | | | v2: Squash multiple commits addressing the new parameter in different files so we don't break the build (Iago) v3: Fix tgsi (Samuel) v4: Fix nir_clone.c (Samuel) v5: Fix vc4 and freedreno (Iago) v6 (Sam) - Fix build errors in nir_lower_indirect_derefs - Use helper to get type size from nir_alu_type. Signed-off-by: Iago Toral Quiroga <[email protected]> Signed-off-by: Samuel Iglesias Gonsalvez <[email protected]> Tested-by: Rob Clark <[email protected]> Reviewed-by: Jason Ekstrand <[email protected]> Reviewed-by: Samuel Iglesias Gonsálvez <[email protected]> Reviewed-by: Iago Toral Quiroga <[email protected]>
* nir: rename nir_const_value fields to include bitsize informationIago Toral Quiroga2016-03-171-1/+1
| | | | | Reviewed-by: Jason Ekstrand <[email protected]> Reviewed-by: Samuel Iglesias Gonsálvez <[email protected]>
* nir: Separate texture from sampler in nir_tex_instrJason Ekstrand2016-02-091-0/+1
| | | | | | | | | | | | | This commit adds the capability to NIR to support separate textures and samplers. As it currently stands, glsl_to_nir only sets the texture deref and leaves the sampler deref alone as it did before and nir_lower_samplers assumes this. Backends can still assume that they are combined and only look at only at the texture index. Or, if they wish, they can assume that they are separate because nir_lower_samplers, tgsi_to_nir, and prog_to_nir all set both texture and sampler index whenever a sampler is required (the two indices are the same in this case). Reviewed-by: Kenneth Graunke <[email protected]>
* nir/tex_instr: Rename sampler to textureJason Ekstrand2016-02-091-4/+4
| | | | | | | | | We're about to separate the two concepts. When we do, the sampler will become optional. Doing a rename first makes the separation a bit more safe because drivers that depend on GLSL or TGSI behaviour will be fine to just use the texture index all the time. Reviewed-by: Kenneth Graunke <[email protected]>
* ttn: use const_index helpersRob Clark2016-02-091-5/+5
| | | | | Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Jason Ekstrand <[email protected]>
* ttn: small logic cleanupRob Clark2016-02-091-1/+1
| | | | | | | The only case where dim!=NULL is where op==load_ubo. But using op==load_ubo is less confusing. Signed-off-by: Rob Clark <[email protected]>
* glsl: move to compiler/Emil Velikov2016-01-261-1/+1
| | | | | | Signed-off-by: Emil Velikov <[email protected]> Acked-by: Matt Turner <[email protected]> Acked-by: Jose Fonseca <[email protected]>
* nir: move to compiler/Emil Velikov2016-01-262-5/+5
| | | | | | Signed-off-by: Emil Velikov <[email protected]> Acked-by: Matt Turner <[email protected]> Acked-by: Jose Fonseca <[email protected]>
* nir: move shader_enums.[ch] to compilerEmil Velikov2016-01-261-1/+1
| | | | | | | | | This way one can reuse it in glsl, nir or other infrastructure without pulling nir as dependency. Signed-off-by: Emil Velikov <[email protected]> Acked-by: Matt Turner <[email protected]> Acked-by: Jose Fonseca <[email protected]>
* ttn: use writemask for store_varRob Clark2016-01-161-26/+2
| | | | | | | Only user is freedreno, and after array-rework it can cope. Avoids generating loads for a store. Signed-off-by: Rob Clark <[email protected]>
* ttn: add missing writemask on store_outputRob Clark2016-01-161-0/+1
| | | | | Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* gallium: Remove unnecessary semicolonsEdward O'Callaghan2016-01-061-1/+1
| | | | | | | | | Fix silly issue with MSVC case fall-though support to need a extra 'break;' Found-by: Coccinelle Signed-off-by: Edward O'Callaghan <[email protected]> Reviewed-by: Brian Paul <[email protected]>
* nir/builder: Add an init function that creates a simple shader for youJason Ekstrand2015-12-291-8/+4
| | | | | | | | | | | A hugely common case when using nir_builder is to have a shader with a single function called main. This adds a helper that gives you just that. This commit also makes us use it in the NIR control-flow unit tests as well as tgsi_to_nir and prog_to_nir. Reviewed-by: Eric Anholt <[email protected]> Reviewed-by: Connor Abbott <[email protected]> Acked-by: Kenneth Graunke <[email protected]>
* nir: Get rid of function overloadsJason Ekstrand2015-12-281-2/+1
| | | | | | | | | | | | | | | | | When Connor originally drafted NIR, he copied the same function+overload system that GLSL IR had with a few names changed. However, this double-indirection is not really needed and has only served to confuse people. Instead, let's just have functions which may not have unique names and may or may not have an implementation. If someone wants to do overload resolving, they can hav a hash table based function+overload system in the overload resolving pass. There's no good reason to keep it in core NIR. Reviewed-by: Connor Abbott <[email protected]> Acked-by: Kenneth Graunke <[email protected]> ir3 bits are Reviewed-by: Rob Clark <[email protected]>
* gallium/auxiliary: don't build NIR sources with MSVC2008 flagsConnor Abbott2015-12-231-4/+0
| | | | | | | | | | | | | NIR has never been built with MSVC2008, so we shouldn't add MSVC2008_COMPAT_CFLAGS to anything that uses it. This allows us to get rid of the pragma in tgsi_to_nir.c. Build tested with freedreno. v2: Use MSVC2013_COMPAT_CLFAGS instead. Reviewed-by: Jose Fonseca <[email protected]> Signed-off-by: Connor Abbott <[email protected]>
* nir: Add a writemask to store intrinsics.Kenneth Graunke2015-12-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tessellation control shaders need to be careful when writing outputs. Because multiple threads can concurrently write the same output variables, we need to only write the exact components we were told. Traditionally, for sub-vector writes, we've read the whole vector, updated the temporary, and written the whole vector back. This breaks down with concurrent access. This patch prepares the way for a solution by adding a writemask field to store_var intrinsics, as well as the other store intrinsics. It then updates all produces to emit a writemask of "all channels enabled". It updates nir_lower_io to copy the writemask to output store intrinsics. Finally, it updates nir_lower_vars_to_ssa to handle partial writemasks by doing a read-modify-write cycle (which is safe, because local variables are specific to a single thread). This should have no functional change, since no one actually emits partial writemasks yet. v2: Make nir_validate momentarily assert that writemasks cover the complete value - we shouldn't have partial writemasks yet (requested by Jason Ekstrand). v3: Fix accidental SSBO change that arose from merge conflicts. v4: Don't try to handle writemasks in ir3_compiler_nir - my code for indirects was likely wrong, and TTN doesn't generate partial writemasks today anyway. Change them to asserts as requested by Rob Clark. Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Jason Ekstrand <[email protected]> [v3]
* nir: Delete bany, ball, fany, fall.Matt Turner2015-12-181-1/+3
| | | | | | | | | | | As in the previous patches, these can be implemented as any(v) -> any_nequal(v, false) all(v) -> all_equal(v, true) and their removal simplifies the code in the next patch. Reviewed-by: Ian Romanick <[email protected]>
* nir: Get rid of *_indirect variants of input/output load/store intrinsicsJason Ekstrand2015-12-101-24/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is some special-casing needed in a competent back-end. However, they can do their special-casing easily enough based on whether or not the offset is a constant. In the mean time, having the *_indirect variants adds special cases a number of places where they don't need to be and, in general, only complicates things. To complicate matters, NIR had no way to convdert an indirect load/store to a direct one in the case that the indirect was a constant so we would still not really get what the back-ends wanted. The best solution seems to be to get rid of the *_indirect variants entirely. This commit is a bunch of different changes squashed together: - nir: Get rid of *_indirect variants of input/output load/store intrinsics - nir/glsl: Stop handling UBO/SSBO load/stores differently depending on indirect - nir/lower_io: Get rid of load/store_foo_indirect - i965/fs: Get rid of load/store_foo_indirect - i965/vec4: Get rid of load/store_foo_indirect - tgsi_to_nir: Get rid of load/store_foo_indirect - ir3/nir: Use the new unified io intrinsics - vc4: Do all uniform loads with byte offsets - vc4/nir: Use the new unified io intrinsics - vc4: Fix load_user_clip_plane crash - vc4: add missing src for store outputs - vc4: Fix state uniforms - nir/lower_clip: Update to the new load/store intrinsics - nir/lower_two_sided_color: Update to the new load intrinsic NIR and i965 changes are Reviewed-by: Kenneth Graunke <[email protected]> NIR indirect declarations and vc4 changes are Reviewed-by: Eric Anholt <[email protected]> ir3 changes are Reviewed-by: Rob Clark <[email protected]> NIR changes are Acked-by: Rob Clark <[email protected]>
* ttn: Whitelist from -Werror=declaration-after-statement.Jose Fonseca2015-12-031-0/+4
| | | | | | | | | nir is the exception among gallium/auxiliary -- we don't need to compile it with MSVC2008 yet. And this enables us to use -Werror=declaration-after-statement in the next commit as we should, without complicated fixes to tgsi_to_nir module. Trvial. Tested with GCC and Clang.
* ttn: fix UMSB conversionIlia Mirkin2015-11-231-1/+1
| | | | Signed-off-by: Ilia Mirkin <[email protected]>
* ttn: add LODQ supportIlia Mirkin2015-11-231-2/+9
| | | | Signed-off-by: Ilia Mirkin <[email protected]>
* nir: s/nir_type_unsigned/nir_type_uintJason Ekstrand2015-11-231-1/+1
| | | | | | | | | | | v2: do the same in tgsi_to_nir (Samuel) v3: added missing cases after rebase (Iago) v4: Add a blank space after '#' in one of the comments (Matt) Reviewed-by: Iago Toral Quiroga <[email protected]> Reviewed-by: Matt Turner <[email protected]>
* ttn: add TEX2 supportIlia Mirkin2015-11-201-3/+11
| | | | | | | | | This fixes CubeArrayShadow tests (where the shadow comes in via a second arg to the TEX2 instruction). Signed-off-by: Ilia Mirkin <[email protected]> Reviewed-by: Rob Clark <[email protected]> Cc: [email protected]
* glsl: move shader_enums into nirRob Clark2015-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | First step towards inverting the dependency between glsl and nir (so nir can be used without glsl). Also solves this issue with 'make distclean' Making distclean in mesa make[2]: Entering directory '/mnt/sdb1/Src64/Mesa-git/mesa/src/mesa' Makefile:2486: ../glsl/.deps/shader_enums.Plo: No such file or directory make[2]: *** No rule to make target '../glsl/.deps/shader_enums.Plo'. Stop. make[2]: Leaving directory '/mnt/sdb1/Src64/Mesa-git/mesa/src/mesa' Makefile:684: recipe for target 'distclean-recursive' failed make[1]: *** [distclean-recursive] Error 1 make[1]: Leaving directory '/mnt/sdb1/Src64/Mesa-git/mesa/src' Makefile:615: recipe for target 'distclean-recursive' failed make: *** [distclean-recursive] Error 1 Reported-by: Andy Furniss <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
* gallium/ttn: Convert to using VARYING_SLOT_* / FRAG_RESULT_*.Eric Anholt2015-09-162-14/+173
| | | | | | | | | | | | | | | This avoids exceeding the size of the .index bitfield since it got truncated, and should make our NIR look more like the NIR that the rest of the NIR developers are working on. v2: split out vc4 updates, first patch uses varying_slot_to_tgsi_semantic() helper, and second patch does the actual conversion. v3: add frag_result_to_tgsi_semantic() helper and don't try to map frag_results to semantic name/index as if they were varying_slot's v4: use VERT_ATTRIB_ for VS inputs v5: Fix vc4 build. Signed-off-by: Rob Clark <[email protected]>
* gallium/ttn: fix cursor handling vs builderRob Clark2015-09-091-8/+6
| | | | | | | | | | | After inserting instructions the cursor.option becomes _after_instr (even if it started life as an _after_block). So we cannot simply stash the current cursor on the if/loop_stack. Otherwise we end up inserting instructions after the endif/endloop in the block preceeding the if/ loop. Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* nir: Convert the builder to use the new NIR cursor API.Kenneth Graunke2015-08-271-17/+17
| | | | | | | | | | | | | | | | | | The NIR cursor API is exactly what we want for the builder's insertion point. This simplifies the API, the implementation, and is actually more flexible as well. This required a bit of reworking of TGSI->NIR's if/loop stack handling; we now store cursors instead of cf_node_lists, for better or worse. v2: Actually move the cursor in the after_instr case. v3: Take advantage of nir_instr_insert (suggested by Connor). v4: vc4 build fixes (thanks to Eric). Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Eric Anholt <[email protected]> [v1] Reviewed-by: Jason Ekstrand <[email protected]> [v4] Acked-by: Connor Abbott <[email protected]> [v4]
* gallium/ttn: Use nir_builder_insert() rather than poking at cf_list.Kenneth Graunke2015-08-251-16/+16
| | | | | | | | | I intend to remove nir_builder::cf_node_list, so I can't have this code poking at it directly. The proper way is to set the insertion point and then simply insert things there. Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* nir: Store gl_shader_stage in nir_shader.Kenneth Graunke2015-08-251-4/+21
| | | | | | | | | | | | This makes it easy for NIR passes to inspect what kind of shader they're operating on. Thanks to Michel Dänzer for helping me figure out where TGSI stores the shader stage information. Signed-off-by: Kenneth Graunke <[email protected]> Reviewed-by: Jason Ekstrand <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* nir: move control flow modification to its own fileConnor Abbott2015-08-241-0/+1
| | | | | | | | | | | | | | | | We want to start reworking and expanding this code, but it'll be a lot easier to do once we disentangle it from the rest of the stuff in nir.c. Unfortunately, there are a few unavoidable dependencies in nir.c on methods we'd rather not expose publicly, since if not used in very specific situations they can cause Bad Things (tm) to happen. Namely, we need to do some magical control flow munging when adding/removing jumps. In the future, we may disallow adding/removing jumps in nir_instr_insert_*() and nir_instr_remove(), and use separate functions that are part of the control flow modification code, but for now we expose them and put them in a separate, private header. Signed-off-by: Connor Abbott <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* ttn: add buffer texture typeRob Clark2015-08-121-0/+3
| | | | | Reviewed-by: Ilia Mirkin <[email protected]> Signed-off-by: Rob Clark <[email protected]>
* gallium/ttn: mark location specially in nir for color0-writes-allIlia Mirkin2015-07-031-1/+6
| | | | | | | | | | We need to distinguish a shader that has separate writes to each MRT from one which is supposed to write the data from MRT 0 to all the MRTs. In TGSI this is done with a property. NIR doesn't have that, so encode it as a funny location and decode on the other end. Signed-off-by: Ilia Mirkin <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
* gallium/ttn: IN/OUT are only array if ArrayID != 0Rob Clark2015-07-031-62/+81
| | | | | | | | Fixes issue with gallium HUD. See this thread for details: http://lists.freedesktop.org/archives/mesa-dev/2015-June/087140.html Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Eric Anholt <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 07:57:03 +0000