summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* svga: minor cleanups, comments in svga_tgsi_insn.cBrian Paul2013-06-221-8/+19
|
* svga: add null ptr check in svga_get_tex_sampler_view()Brian Paul2013-06-221-0/+3
| | | | Trivial.
* tools/trace: Several tweaks/fixes to dump_stateJosé Fonseca2013-06-221-9/+29
|
* trace: Dump result of create_stream_output_targetJosé Fonseca2013-06-221-0/+2
|
* vl/mpeg12: fix mpeg-1 bytestream parsingMaarten Lankhorst2013-06-221-6/+24
| | | | | | | | | | | This fixes the bytestream parsing of mpeg-1 stream, but still leaves open a number of issues with the interpretation: - IDCT mismatch control is not correct for MPEG-1. - Slices do not have to start and end on the same horizontal row of macroblocks. - picture_coding_type = 4 (D-pictures) is not handled. - full_pel_*_vector is not handled. Signed-off-by: Maarten Lankhorst <[email protected]>
* freedreno/a3xx/compiler: ensure min # of cycles after bary instrRob Clark2013-06-211-2/+13
| | | | | | | | | | The results of a bary.f do not appear to be immediatley available, but there is no explicit sync bit. Instead the compiler must just ensure that there are a minimum number of instructions following the bary before use of the result of the bary. We aren't clever enough for that so just throw in some nop's. Signed-off-by: Rob Clark <[email protected]>
* freedreno/a3xx/compiler: add TGSI_OPCODE_ABSRob Clark2013-06-211-6/+14
| | | | Signed-off-by: Rob Clark <[email protected]>
* freedreno/a3xx/compiler: add TGSI_OPCODE_DPHRob Clark2013-06-211-3/+18
| | | | Signed-off-by: Rob Clark <[email protected]>
* freedreno/a3xx/compiler: fix for replicating instructionsRob Clark2013-06-211-24/+18
| | | | | | | | | | | | | | If we are accumulating result into tmp.x, and need a mov to final destination, we want to move the .x component into all of the components enabled from the read dest's writemask, ie. we want: MOV dst.xyzw tmp.xxxx rather than: MOV dst.xyzw tmp.xyzw Signed-off-by: Rob Clark <[email protected]>
* mesa: Move the common _mesa_glsl_compile_shader() code to glsl/.Eric Anholt2013-06-216-125/+100
| | | | | | | | | | | This code had no relation to ir_to_mesa.cpp, since it was also used by intel and state_tracker, and most of it was duplicated with the standalone compiler (which has periodically drifted from the Mesa copy). v2: Split from the ir_to_mesa to shaderapi.c changes. Acked-by: Paul Berry <[email protected]> (v1) Reviewed-by: Kenneth Graunke <[email protected]>
* mesa: Move shader compiler API code to shaderapi.cEric Anholt2013-06-212-35/+38
| | | | | | | | | | | There was nothing ir_to_mesa-specific about this code, but it's not exactly part of the compiler's core turning-source-into-IR job either. v2: Split from the ir_to_mesa to glsl/ commit, avoid renaming the sh variable. Acked-by: Paul Berry <[email protected]> (v1) Reviewed-by: Kenneth Graunke <[email protected]>
* mesa: Fix missing setting of shader->IsES.Eric Anholt2013-06-211-0/+1
| | | | | | | | | | | | | I noticed this while trying to merge code with the builtin compiler, which does set it. Note that this causes two regressions in piglit in default-precision-sampler.* which try to link without a vertex or fragment shader, due to being run under the desktop glslparsertest binary (using ARB_ES3_compatibility) that doesn't know about this requirement. Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* mesa: Use shared code for converting shader targets to short strings.Eric Anholt2013-06-219-43/+61
| | | | | | | | We were duplicating this code all over the place, and they all would need updating for the next set of shader targets. Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* glsl: Remove ir_print_visitor.h includes and usageEric Anholt2013-06-2118-26/+8
| | | | | | | | | | | | | We have ir->print() to do the old declaration of a visitor and having the IR accept the visitor (yuck!). And now you can call _mesa_print_ir() safely anywhere that you know what an ir_instruction is. A couple of missing printf("\n")s are added in error paths -- when an expression is handed to the visitor, it doesn't print '\n' (since it might be a step in printing a whole expression tree). Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* glsl: Make _mesa_print_ir() available from anything including ir.h.Eric Anholt2013-06-213-3/+11
| | | | | | | | | | No more forgetting to #include "ir_print_visitor.h" when doing temporary debug code, or forgetting and leaving it in after removing your temporary debug code. Also, available from C code so you don't need to move the caller to C++ just to call it (see also: ir_to_mesa.cpp). Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* glsl: Make some files safe to include from CPaul Berry2013-06-213-0/+8
| | | | | Reviewed-by: Eric Anholt <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]>
* tools/trace: Quick instructions/notes.José Fonseca2013-06-212-0/+48
| | | | Reviewed-by: Brian Paul <[email protected]>
* tools/trace: Do a better job at comparing multi line strings.José Fonseca2013-06-211-1/+34
| | | | | For TGSI diffing. Reviewed-by: Brian Paul <[email protected]>
* tools/trace: Tool to compare json state dumps.José Fonseca2013-06-211-0/+324
| | | | | Copied verbatim from apitrace's scripts/jsondiff.py Reviewed-by: Brian Paul <[email protected]>
* tools/trace: Tool to dump gallium state at any draw call.José Fonseca2013-06-212-2/+635
| | | | | | | Based from the code from the good old python state tracker. Extremely handy to diagnose regressions in state trackers. Reviewed-by: Brian Paul <[email protected]>
* tools/trace: Defer blob hex-decoding.José Fonseca2013-06-212-9/+27
| | | | | To speed up parsing. Reviewed-by: Brian Paul <[email protected]>
* trace: Don't dump texture transfers.José Fonseca2013-06-213-10/+19
| | | | | Huge trace files with little value. Reviewed-by: Brian Paul <[email protected]>
* ilo: replace a boolean by boolChia-I Wu2013-06-201-1/+1
| | | | bool is used internally. This is just cosmetic.
* ilo: rename cache_seqno to uploadedChia-I Wu2013-06-202-6/+6
| | | | It has been used as a bool since shader cache rework.
* util: (trivial) add has_popcnt fieldRoland Scheidegger2013-06-192-0/+2
| | | | | | Not used yet but there's a couple of places in llvmpipe which should use this (occlusion count is currently very inefficent if there's no cpu popcnt instruction).
* llvmpipe: use 64bit counter for occlusion queriesRoland Scheidegger2013-06-193-5/+10
| | | | | | | Some APIs require 64bit and at least for 64bit archs the overhead should be minimal. Reviewed-by: Jose Fonseca <[email protected]>
* llvmpipe: handle more queriesRoland Scheidegger2013-06-197-14/+67
| | | | | | | | | | | Handle PIPE_QUERY_GPU_FINISHED and PIPE_QUERY_TIMESTAMP_DISJOINT, and also fill out the ps_invocations and c_primitives from the PIPE_QUERY_PIPELINE_STATISTICS (the others in there should already be handled). Note that ps_invocations isn't pixel exact, just 16 pixel exact but I guess it's better than nothing. Doesn't really seem to work correctly but there's probably bugs elsewhere. Reviewed-by: Jose Fonseca <[email protected]>
* softpipe: handle all queries, and change for the new disjoint semanticsRoland Scheidegger2013-06-191-11/+28
| | | | | | | | The driver can do render_condition but wasn't handling the occlusion and so_overflow predicates (though the latter might not work yet due to gs support). Reviewed-by: Jose Fonseca <[email protected]>
* gallium: fix PIPE_QUERY_TIMESTAMP_DISJOINTRoland Scheidegger2013-06-193-12/+12
| | | | | | | | | | | The semantics didn't really make sense, not really matching neither d3d9 (though the docs are all broken there) nor d3d10. So make it match d3d10 semantics, which actually gives meaning to the "disjoint" part. Drivers are fixed up in a very primitive way, I have no idea what could actually cause the counter to become unreliable so just always return FALSE for the disjoint part. Reviewed-by: Jose Fonseca <[email protected]>
* trace: Dump pipe_rasterizer_state::clip_halfz.José Fonseca2013-06-191-0/+1
| | | | Trivial.
* svga: add some comments about primitive conversionBrian Paul2013-06-192-11/+26
| | | | | | | And clean up the svga_translate_prim() function with better variable names. Reviewed-by: Jose Fonseca <[email protected]>
* indices: add some commentsBrian Paul2013-06-192-4/+28
| | | | | | This is pretty complicated code with few/any comments. Here's a first stab. Reviewed-by: Jose Fonseca <[email protected]>
* svga: reindent svga_tgsi.cBrian Paul2013-06-191-63/+65
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* svga: whitespace, comment, formatting fixes in svga_tgsi_emit.hBrian Paul2013-06-191-42/+56
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* svga: move some svga/tgsi functionsBrian Paul2013-06-193-125/+149
| | | | | | | | Move some functions from the svga_tgsi_insn.h header into the svga_tgsi_insn.c file since they're only used there. Plus, add comments and fix formatting. Reviewed-by: Jose Fonseca <[email protected]>
* svga: formatting fixes in svga_tgsi_insn.cBrian Paul2013-06-191-260/+395
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* mesa: wrap comments, code to 78 columns in multisample.cBrian Paul2013-06-191-6/+11
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* mesa: remove unused BITSET64 macrosBrian Paul2013-06-191-61/+0
| | | | Reviewed-by: Jose Fonseca <[email protected]>
* nvc0: kill assert in ppp codeMaarten Lankhorst2013-06-191-2/+0
| | | | | It's no longer always true, and the video tilign aligment should ensure the alignment is handled correctly regardless.
* ilo: rework shader cacheChia-I Wu2013-06-199-186/+356
| | | | | | | | | The new code makes the shader cache manages all shaders and be able to upload all of them to a caller-provided bo as a whole. Previously, we uploaded only the bound shaders. When a different set of shaders is bound, we had to allocate a new kernel bo to upload if the current one is busy.
* nv50: avoid crash on updating RASTERIZE_ENABLE stateEmil Velikov2013-06-191-0/+10
| | | | | | | | When doing blit using the 3D engine, the rasterizer cso may be NULL. Ported from nvc0 commit 8aa8b0539. Signed-off-by: Emil Velikov <[email protected]>
* wayland: Handle global_remove event as wellKristian Høgsberg2013-06-181-1/+8
| | | | | | | | | | | | We need to set up a handler for the global_remove event that gets sent out when a global gets removed. Without the handler we end up calling a NULL pointer. https://bugs.freedesktop.org/show_bug.cgi?id=65910 NOTE: This is a candidate for the stable branches. Signed-off-by: Kristian Høgsberg <[email protected]>
* gen7: fix GPU hang on WebGL texture-size testJordan Justen2013-06-181-1/+1
| | | | | | | | | | | | | | | | | | When rendering to a texture with BaseLevel set, the miptree may be laid out such that BaseLevel is in level 0 of the miptree (to avoid wasting memory on unused levels between 0 and BaseLevel-1). In that case, we have to shift our render target's level down to the appropriate level of the smaller miptree. The WebGL test in combination with a meta code relating to glGenerateMipmap also triggered a similar failure scenario. This GPU hang regression was introduced by c754f7a8. Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65324 Signed-off-by: Jordan Justen <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* intel: Remove unused IS_POWER_OF_TWO() macro.Eric Anholt2013-06-181-2/+0
| | | | | | The is_power_of_two() inline function has been used instead. Reviewed-by: Matt Turner <[email protected]>
* Revert "draw: clear the draw buffers in draw"Zack Rusin2013-06-178-34/+13
| | | | | | | | | | | This reverts commit 41966fdb3b71c0b70aeb095e0eb3c5626c144a3a. While it's a lot cleaner it causes regressions because the draw interface is always called from the draw functions of the drivers (because the buffers need to be mapped) which means that the stream output buffers endup being cleared on every draw rather than on setting. Signed-off-by: Zack Rusin <[email protected]>
* llvmpipe: fixes for conditional renderingRoland Scheidegger2013-06-184-36/+86
| | | | | | | | | | honor render_condition for clear_render_target and clear_depth_stencil. Also add minimal support for occlusion predicate, though it can't be active at the same time as an occlusion query yet. While here also switchify some large if-else (actually just mutually exclusive if-if-if...) constructs. Reviewed-by: Jose Fonseca <[email protected]>
* gallium: add condition parameter to render_conditionRoland Scheidegger2013-06-1842-40/+95
| | | | | | | | | | | | | For conditional rendering this makes it possible to skip rendering if either the predicate is true or false, as supported by d3d10 (in fact previously it was sort of implied skip rendering if predicate is false for occlusion predicate, and true for so_overflow predicate). There's no cap bit for this as presumably all drivers could do it trivially (but this patch does not implement it for the drivers using true hw predicates, nvxx, r600, radeonsi, no change is expected for OpenGL functionality). Reviewed-by: Jose Fonseca <[email protected]>
* ilo: construct depth/stencil command in create_surface()Chia-I Wu2013-06-186-271/+368
| | | | | | | | | | Add ilo_gpe_init_zs_surface() to construct 3DSTATE_DEPTH_BUFFER 3DSTATE_STENCIL_BUFFER 3DSTATE_HIER_DEPTH_BUFFER at surface creation time. This allows fast state emission in draw_vbo().
* intel: Allow blorp CopyTexSubImage to nonzero destination slices.Eric Anholt2013-06-173-14/+9
| | | | | Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Paul Berry <[email protected]>
* intel: Allow blit CopyTexSubImage to nonzero destination slices.Eric Anholt2013-06-171-14/+9
| | | | | Reviewed-by: Kenneth Graunke <[email protected]> Reviewed-by: Paul Berry <[email protected]>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 13:06:09 +0000