diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/mesa/drivers/dri/i965/brw_wm_glsl.c | 451 |
1 files changed, 437 insertions, 14 deletions
diff --git a/src/mesa/drivers/dri/i965/brw_wm_glsl.c b/src/mesa/drivers/dri/i965/brw_wm_glsl.c index cb728190f5c..baecfdcb799 100644 --- a/src/mesa/drivers/dri/i965/brw_wm_glsl.c +++ b/src/mesa/drivers/dri/i965/brw_wm_glsl.c @@ -1095,7 +1095,7 @@ static void noise1_sub( struct brw_wm_compile *c ) { /* Arrange the two end coordinates into scalars (itmp0/itmp1) to be hashed. Also compute the remainder (offset within the unit length), interleaved to reduce register dependency penalties. */ - brw_RNDD( p, itmp[ 0 ], param ); + brw_RNDD( p, retype( itmp[ 0 ], BRW_REGISTER_TYPE_D ), param ); brw_FRC( p, param, param ); brw_ADD( p, itmp[ 1 ], itmp[ 0 ], brw_imm_ud( 1 ) ); brw_MOV( p, itmp[ 3 ], brw_imm_ud( 0x79D9 ) ); /* constant used later */ @@ -1220,8 +1220,8 @@ static void noise2_sub( struct brw_wm_compile *c ) { /* Arrange the four corner coordinates into scalars (itmp0..itmp3) to be hashed. Also compute the remainders (offsets within the unit square), interleaved to reduce register dependency penalties. */ - brw_RNDD( p, itmp[ 0 ], param0 ); - brw_RNDD( p, itmp[ 1 ], param1 ); + brw_RNDD( p, retype( itmp[ 0 ], BRW_REGISTER_TYPE_D ), param0 ); + brw_RNDD( p, retype( itmp[ 1 ], BRW_REGISTER_TYPE_D ), param1 ); brw_FRC( p, param0, param0 ); brw_FRC( p, param1, param1 ); brw_MOV( p, itmp[ 4 ], brw_imm_ud( 0xBA97 ) ); /* constant used later */ @@ -1400,21 +1400,19 @@ static void noise3_sub( struct brw_wm_compile *c ) { /* Arrange the eight corner coordinates into scalars (itmp0..itmp3) to be hashed. Also compute the remainders (offsets within the unit cube), interleaved to reduce register dependency penalties. */ - brw_RNDD( p, itmp[ 0 ], param0 ); - brw_RNDD( p, itmp[ 1 ], param1 ); - brw_RNDD( p, itmp[ 2 ], param2 ); - brw_MOV( p, itmp[ 4 ], brw_imm_ud( 0xBC8F ) ); /* constant used later */ - brw_MOV( p, itmp[ 5 ], brw_imm_ud( 0xD0BD ) ); /* constant used later */ - brw_MOV( p, itmp[ 6 ], brw_imm_ud( 0x9B93 ) ); /* constant used later */ + brw_RNDD( p, retype( itmp[ 0 ], BRW_REGISTER_TYPE_D ), param0 ); + brw_RNDD( p, retype( itmp[ 1 ], BRW_REGISTER_TYPE_D ), param1 ); + brw_RNDD( p, retype( itmp[ 2 ], BRW_REGISTER_TYPE_D ), param2 ); brw_FRC( p, param0, param0 ); brw_FRC( p, param1, param1 ); brw_FRC( p, param2, param2 ); /* Since we now have only 16 bits of precision in the hash, we must be more careful about thorough mixing to maintain entropy as we squash the input vector into a small scalar. */ - brw_MUL( p, brw_acc_reg(), itmp[ 4 ], itmp[ 0 ] ); - brw_MAC( p, brw_acc_reg(), itmp[ 5 ], itmp[ 1 ] ); - brw_MAC( p, itmp[ 0 ], itmp[ 6 ], itmp[ 2 ] ); + brw_MUL( p, brw_null_reg(), low_words( itmp[ 0 ] ), brw_imm_uw( 0xBC8F ) ); + brw_MAC( p, brw_null_reg(), low_words( itmp[ 1 ] ), brw_imm_uw( 0xD0BD ) ); + brw_MAC( p, low_words( itmp[ 0 ] ), low_words( itmp[ 2 ] ), + brw_imm_uw( 0x9B93 ) ); brw_ADD( p, high_words( itmp[ 0 ] ), low_words( itmp[ 0 ] ), brw_imm_uw( 0xBC8F ) ); @@ -1668,6 +1666,430 @@ static void emit_noise3( struct brw_wm_compile *c, release_tmps( c, mark ); } +/* For the four-dimensional case, the little micro-optimisation benefits + we obtain by unrolling all the loops aren't worth the massive bloat it + now causes. Instead, we loop twice around performing a similar operation + to noise3, once for the w=0 cube and once for the w=1, with a bit more + code to glue it all together. */ +static void noise4_sub( struct brw_wm_compile *c ) { + + struct brw_compile *p = &c->func; + struct brw_reg param[ 4 ], + x0y0, x0y1, x1y0, x1y1, /* gradients at four of the corners */ + w0, /* noise for the w=0 cube */ + floors[ 2 ], /* integer coordinates of base corner of hypercube */ + interp[ 4 ], /* interpolation coefficients */ + t, tmp[ 8 ], /* float temporaries */ + itmp[ 8 ], /* unsigned integer temporaries (aliases of floats above) */ + wtmp[ 8 ]; /* 16-way unsigned word temporaries (aliases of above) */ + int i, j; + int mark = mark_tmps( c ); + GLuint loop, origin; + + x0y0 = alloc_tmp( c ); + x0y1 = alloc_tmp( c ); + x1y0 = alloc_tmp( c ); + x1y1 = alloc_tmp( c ); + t = alloc_tmp( c ); + w0 = alloc_tmp( c ); + floors[ 0 ] = retype( alloc_tmp( c ), BRW_REGISTER_TYPE_UD ); + floors[ 1 ] = retype( alloc_tmp( c ), BRW_REGISTER_TYPE_UD ); + + for( i = 0; i < 4; i++ ) { + param[ i ] = lookup_tmp( c, mark - 5 + i ); + interp[ i ] = alloc_tmp( c ); + } + + for( i = 0; i < 8; i++ ) { + tmp[ i ] = alloc_tmp( c ); + itmp[ i ] = retype( tmp[ i ], BRW_REGISTER_TYPE_UD ); + wtmp[ i ] = brw_uw16_grf( tmp[ i ].nr, 0 ); + } + + brw_set_access_mode( p, BRW_ALIGN_1 ); + + /* We only want 16 bits of precision from the integral part of each + co-ordinate, but unfortunately the RNDD semantics would saturate + at 16 bits if we performed the operation directly to a 16-bit + destination. Therefore, we round to 32-bit temporaries where + appropriate, and then store only the lower 16 bits. */ + brw_RNDD( p, retype( floors[ 0 ], BRW_REGISTER_TYPE_D ), param[ 0 ] ); + brw_RNDD( p, retype( itmp[ 0 ], BRW_REGISTER_TYPE_D ), param[ 1 ] ); + brw_RNDD( p, retype( floors[ 1 ], BRW_REGISTER_TYPE_D ), param[ 2 ] ); + brw_RNDD( p, retype( itmp[ 1 ], BRW_REGISTER_TYPE_D ), param[ 3 ] ); + brw_MOV( p, high_words( floors[ 0 ] ), low_words( itmp[ 0 ] ) ); + brw_MOV( p, high_words( floors[ 1 ] ), low_words( itmp[ 1 ] ) ); + + /* Modify the flag register here, because the side effect is useful + later (see below). We know for certain that all flags will be + cleared, since the FRC instruction cannot possibly generate + negative results. Even for exceptional inputs (infinities, denormals, + NaNs), the architecture guarantees that the L conditional is false. */ + brw_set_conditionalmod( p, BRW_CONDITIONAL_L ); + brw_FRC( p, param[ 0 ], param[ 0 ] ); + brw_set_predicate_control( p, BRW_PREDICATE_NONE ); + for( i = 1; i < 4; i++ ) + brw_FRC( p, param[ i ], param[ i ] ); + + /* Calculate the interpolation coefficients (6t^5 - 15t^4 + 10t^3) first + of all. */ + for( i = 0; i < 4; i++ ) + brw_MUL( p, interp[ i ], param[ i ], brw_imm_f( 6.0 ) ); + for( i = 0; i < 4; i++ ) + brw_ADD( p, interp[ i ], interp[ i ], brw_imm_f( -15.0 ) ); + for( i = 0; i < 4; i++ ) + brw_MUL( p, interp[ i ], interp[ i ], param[ i ] ); + for( i = 0; i < 4; i++ ) + brw_ADD( p, interp[ i ], interp[ i ], brw_imm_f( 10.0 ) ); + for( j = 0; j < 3; j++ ) + for( i = 0; i < 4; i++ ) + brw_MUL( p, interp[ i ], interp[ i ], param[ i ] ); + + /* Mark the current address, as it will be a jump destination. The + following code will be executed twice: first, with the flag + register clear indicating the w=0 case, and second with flags + set for w=1. */ + loop = p->nr_insn; + + /* Arrange the eight corner coordinates into scalars (itmp0..itmp3) to + be hashed. Since we have only 16 bits of precision in the hash, we + must be careful about thorough mixing to maintain entropy as we + squash the input vector into a small scalar. */ + brw_MUL( p, brw_null_reg(), low_words( floors[ 0 ] ), + brw_imm_uw( 0xBC8F ) ); + brw_MAC( p, brw_null_reg(), high_words( floors[ 0 ] ), + brw_imm_uw( 0xD0BD ) ); + brw_MAC( p, brw_null_reg(), low_words( floors[ 1 ] ), + brw_imm_uw( 0x9B93 ) ); + brw_MAC( p, low_words( itmp[ 0 ] ), high_words( floors[ 1 ] ), + brw_imm_uw( 0xA359 ) ); + brw_ADD( p, high_words( itmp[ 0 ] ), low_words( itmp[ 0 ] ), + brw_imm_uw( 0xBC8F ) ); + + /* Temporarily disable the execution mask while we work with ExecSize=16 + channels (the mask is set for ExecSize=8 and is probably incorrect). + Although this might cause execution of unwanted channels, the code + writes only to temporary registers and has no side effects, so + disabling the mask is harmless. */ + brw_push_insn_state( p ); + brw_set_mask_control( p, BRW_MASK_DISABLE ); + brw_ADD( p, wtmp[ 1 ], wtmp[ 0 ], brw_imm_uw( 0xD0BD ) ); + brw_ADD( p, wtmp[ 2 ], wtmp[ 0 ], brw_imm_uw( 0x9B93 ) ); + brw_ADD( p, wtmp[ 3 ], wtmp[ 1 ], brw_imm_uw( 0x9B93 ) ); + + /* We're now ready to perform the hashing. The eight hashes are + interleaved for performance. The hash function used is + designed to rapidly achieve avalanche and require only 16x16 + bit multiplication, and 8-bit swizzles (which we get for + free). */ + for( i = 0; i < 4; i++ ) + brw_MUL( p, wtmp[ i ], wtmp[ i ], brw_imm_uw( 0x28D9 ) ); + for( i = 0; i < 4; i++ ) + brw_XOR( p, even_bytes( wtmp[ i ] ), even_bytes( wtmp[ i ] ), + odd_bytes( wtmp[ i ] ) ); + for( i = 0; i < 4; i++ ) + brw_MUL( p, wtmp[ i ], wtmp[ i ], brw_imm_uw( 0xC6D5 ) ); + for( i = 0; i < 4; i++ ) + brw_XOR( p, even_bytes( wtmp[ i ] ), even_bytes( wtmp[ i ] ), + odd_bytes( wtmp[ i ] ) ); + brw_pop_insn_state( p ); + + /* Now we want to initialise the four rear gradients based on the + hashes. Format conversion from signed integer to float leaves + everything scaled too high by a factor of pow( 2, 15 ), but + we correct for that right at the end. */ + /* x component */ + brw_ADD( p, t, param[ 0 ], brw_imm_f( -1.0 ) ); + brw_MOV( p, x0y0, low_words( tmp[ 0 ] ) ); + brw_MOV( p, x0y1, low_words( tmp[ 1 ] ) ); + brw_MOV( p, x1y0, high_words( tmp[ 0 ] ) ); + brw_MOV( p, x1y1, high_words( tmp[ 1 ] ) ); + + brw_push_insn_state( p ); + brw_set_mask_control( p, BRW_MASK_DISABLE ); + brw_SHL( p, wtmp[ 0 ], wtmp[ 0 ], brw_imm_uw( 4 ) ); + brw_SHL( p, wtmp[ 1 ], wtmp[ 1 ], brw_imm_uw( 4 ) ); + brw_pop_insn_state( p ); + + brw_MUL( p, x1y0, x1y0, t ); + brw_MUL( p, x1y1, x1y1, t ); + brw_ADD( p, t, param[ 1 ], brw_imm_f( -1.0 ) ); + brw_MUL( p, x0y0, x0y0, param[ 0 ] ); + brw_MUL( p, x0y1, x0y1, param[ 0 ] ); + + /* y component */ + brw_MOV( p, tmp[ 5 ], low_words( tmp[ 1 ] ) ); + brw_MOV( p, tmp[ 7 ], high_words( tmp[ 1 ] ) ); + brw_MOV( p, tmp[ 4 ], low_words( tmp[ 0 ] ) ); + brw_MOV( p, tmp[ 6 ], high_words( tmp[ 0 ] ) ); + + brw_push_insn_state( p ); + brw_set_mask_control( p, BRW_MASK_DISABLE ); + brw_SHL( p, wtmp[ 0 ], wtmp[ 0 ], brw_imm_uw( 4 ) ); + brw_SHL( p, wtmp[ 1 ], wtmp[ 1 ], brw_imm_uw( 4 ) ); + brw_pop_insn_state( p ); + + brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); + brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); + /* prepare t for the w component (used below): w the first time through + the loop; w - 1 the second time) */ + brw_set_predicate_control( p, BRW_PREDICATE_NORMAL ); + brw_ADD( p, t, param[ 3 ], brw_imm_f( -1.0 ) ); + p->current->header.predicate_inverse = 1; + brw_MOV( p, t, param[ 3 ] ); + p->current->header.predicate_inverse = 0; + brw_set_predicate_control( p, BRW_PREDICATE_NONE ); + brw_MUL( p, tmp[ 4 ], tmp[ 4 ], param[ 1 ] ); + brw_MUL( p, tmp[ 6 ], tmp[ 6 ], param[ 1 ] ); + + brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); + brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); + brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); + brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); + + /* z component */ + brw_MOV( p, tmp[ 4 ], low_words( tmp[ 0 ] ) ); + brw_MOV( p, tmp[ 5 ], low_words( tmp[ 1 ] ) ); + brw_MOV( p, tmp[ 6 ], high_words( tmp[ 0 ] ) ); + brw_MOV( p, tmp[ 7 ], high_words( tmp[ 1 ] ) ); + + brw_push_insn_state( p ); + brw_set_mask_control( p, BRW_MASK_DISABLE ); + brw_SHL( p, wtmp[ 0 ], wtmp[ 0 ], brw_imm_uw( 4 ) ); + brw_SHL( p, wtmp[ 1 ], wtmp[ 1 ], brw_imm_uw( 4 ) ); + brw_pop_insn_state( p ); + + brw_MUL( p, tmp[ 4 ], tmp[ 4 ], param[ 2 ] ); + brw_MUL( p, tmp[ 5 ], tmp[ 5 ], param[ 2 ] ); + brw_MUL( p, tmp[ 6 ], tmp[ 6 ], param[ 2 ] ); + brw_MUL( p, tmp[ 7 ], tmp[ 7 ], param[ 2 ] ); + + brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); + brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); + brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); + brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); + + /* w component */ + brw_MOV( p, tmp[ 4 ], low_words( tmp[ 0 ] ) ); + brw_MOV( p, tmp[ 5 ], low_words( tmp[ 1 ] ) ); + brw_MOV( p, tmp[ 6 ], high_words( tmp[ 0 ] ) ); + brw_MOV( p, tmp[ 7 ], high_words( tmp[ 1 ] ) ); + + brw_MUL( p, tmp[ 4 ], tmp[ 4 ], t ); + brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); + brw_MUL( p, tmp[ 6 ], tmp[ 6 ], t ); + brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); + brw_ADD( p, t, param[ 0 ], brw_imm_f( -1.0 ) ); + + brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); + brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); + brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); + brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); + + /* Here we interpolate in the y dimension... */ + brw_ADD( p, x0y1, x0y1, negate( x0y0 ) ); + brw_ADD( p, x1y1, x1y1, negate( x1y0 ) ); + brw_MUL( p, x0y1, x0y1, interp[ 1 ] ); + brw_MUL( p, x1y1, x1y1, interp[ 1 ] ); + brw_ADD( p, x0y0, x0y0, x0y1 ); + brw_ADD( p, x1y0, x1y0, x1y1 ); + + /* And now in x. Leave the result in tmp[ 0 ] (see below)... */ + brw_ADD( p, x1y0, x1y0, negate( x0y0 ) ); + brw_MUL( p, x1y0, x1y0, interp[ 0 ] ); + brw_ADD( p, tmp[ 0 ], x0y0, x1y0 ); + + /* Now do the same thing for the front four gradients... */ + /* x component */ + brw_MOV( p, x0y0, low_words( tmp[ 2 ] ) ); + brw_MOV( p, x0y1, low_words( tmp[ 3 ] ) ); + brw_MOV( p, x1y0, high_words( tmp[ 2 ] ) ); + brw_MOV( p, x1y1, high_words( tmp[ 3 ] ) ); + + brw_push_insn_state( p ); + brw_set_mask_control( p, BRW_MASK_DISABLE ); + brw_SHL( p, wtmp[ 2 ], wtmp[ 2 ], brw_imm_uw( 4 ) ); + brw_SHL( p, wtmp[ 3 ], wtmp[ 3 ], brw_imm_uw( 4 ) ); + brw_pop_insn_state( p ); + + brw_MUL( p, x1y0, x1y0, t ); + brw_MUL( p, x1y1, x1y1, t ); + brw_ADD( p, t, param[ 1 ], brw_imm_f( -1.0 ) ); + brw_MUL( p, x0y0, x0y0, param[ 0 ] ); + brw_MUL( p, x0y1, x0y1, param[ 0 ] ); + + /* y component */ + brw_MOV( p, tmp[ 5 ], low_words( tmp[ 3 ] ) ); + brw_MOV( p, tmp[ 7 ], high_words( tmp[ 3 ] ) ); + brw_MOV( p, tmp[ 4 ], low_words( tmp[ 2 ] ) ); + brw_MOV( p, tmp[ 6 ], high_words( tmp[ 2 ] ) ); + + brw_push_insn_state( p ); + brw_set_mask_control( p, BRW_MASK_DISABLE ); + brw_SHL( p, wtmp[ 2 ], wtmp[ 2 ], brw_imm_uw( 4 ) ); + brw_SHL( p, wtmp[ 3 ], wtmp[ 3 ], brw_imm_uw( 4 ) ); + brw_pop_insn_state( p ); + + brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); + brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); + brw_ADD( p, t, param[ 2 ], brw_imm_f( -1.0 ) ); + brw_MUL( p, tmp[ 4 ], tmp[ 4 ], param[ 1 ] ); + brw_MUL( p, tmp[ 6 ], tmp[ 6 ], param[ 1 ] ); + + brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); + brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); + brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); + brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); + + /* z component */ + brw_MOV( p, tmp[ 4 ], low_words( tmp[ 2 ] ) ); + brw_MOV( p, tmp[ 5 ], low_words( tmp[ 3 ] ) ); + brw_MOV( p, tmp[ 6 ], high_words( tmp[ 2 ] ) ); + brw_MOV( p, tmp[ 7 ], high_words( tmp[ 3 ] ) ); + + brw_push_insn_state( p ); + brw_set_mask_control( p, BRW_MASK_DISABLE ); + brw_SHL( p, wtmp[ 2 ], wtmp[ 2 ], brw_imm_uw( 4 ) ); + brw_SHL( p, wtmp[ 3 ], wtmp[ 3 ], brw_imm_uw( 4 ) ); + brw_pop_insn_state( p ); + + brw_MUL( p, tmp[ 4 ], tmp[ 4 ], t ); + brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); + brw_MUL( p, tmp[ 6 ], tmp[ 6 ], t ); + brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); + /* prepare t for the w component (used below): w the first time through + the loop; w - 1 the second time) */ + brw_set_predicate_control( p, BRW_PREDICATE_NORMAL ); + brw_ADD( p, t, param[ 3 ], brw_imm_f( -1.0 ) ); + p->current->header.predicate_inverse = 1; + brw_MOV( p, t, param[ 3 ] ); + p->current->header.predicate_inverse = 0; + brw_set_predicate_control( p, BRW_PREDICATE_NONE ); + + brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); + brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); + brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); + brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); + + /* w component */ + brw_MOV( p, tmp[ 4 ], low_words( tmp[ 2 ] ) ); + brw_MOV( p, tmp[ 5 ], low_words( tmp[ 3 ] ) ); + brw_MOV( p, tmp[ 6 ], high_words( tmp[ 2 ] ) ); + brw_MOV( p, tmp[ 7 ], high_words( tmp[ 3 ] ) ); + + brw_MUL( p, tmp[ 4 ], tmp[ 4 ], t ); + brw_MUL( p, tmp[ 5 ], tmp[ 5 ], t ); + brw_MUL( p, tmp[ 6 ], tmp[ 6 ], t ); + brw_MUL( p, tmp[ 7 ], tmp[ 7 ], t ); + + brw_ADD( p, x0y0, x0y0, tmp[ 4 ] ); + brw_ADD( p, x0y1, x0y1, tmp[ 5 ] ); + brw_ADD( p, x1y0, x1y0, tmp[ 6 ] ); + brw_ADD( p, x1y1, x1y1, tmp[ 7 ] ); + + /* Interpolate in the y dimension: */ + brw_ADD( p, x0y1, x0y1, negate( x0y0 ) ); + brw_ADD( p, x1y1, x1y1, negate( x1y0 ) ); + brw_MUL( p, x0y1, x0y1, interp[ 1 ] ); + brw_MUL( p, x1y1, x1y1, interp[ 1 ] ); + brw_ADD( p, x0y0, x0y0, x0y1 ); + brw_ADD( p, x1y0, x1y0, x1y1 ); + + /* And now in x. The rear face is in tmp[ 0 ] (see above), so this + time put the front face in tmp[ 1 ] and we're nearly there... */ + brw_ADD( p, x1y0, x1y0, negate( x0y0 ) ); + brw_MUL( p, x1y0, x1y0, interp[ 0 ] ); + brw_ADD( p, tmp[ 1 ], x0y0, x1y0 ); + + /* Another interpolation, in the z dimension: */ + brw_ADD( p, tmp[ 1 ], tmp[ 1 ], negate( tmp[ 0 ] ) ); + brw_MUL( p, tmp[ 1 ], tmp[ 1 ], interp[ 2 ] ); + brw_ADD( p, tmp[ 0 ], tmp[ 0 ], tmp[ 1 ] ); + + /* Exit the loop if we've computed both cubes... */ + origin = p->nr_insn; + brw_push_insn_state( p ); + brw_set_predicate_control( p, BRW_PREDICATE_NORMAL ); + brw_set_mask_control( p, BRW_MASK_DISABLE ); + brw_ADD( p, brw_ip_reg(), brw_ip_reg(), brw_imm_d( 0 ) ); + brw_pop_insn_state( p ); + + /* Save the result for the w=0 case, and increment the w coordinate: */ + brw_MOV( p, w0, tmp[ 0 ] ); + brw_ADD( p, high_words( floors[ 1 ] ), high_words( floors[ 1 ] ), + brw_imm_uw( 1 ) ); + + /* Loop around for the other cube. Explicitly set the flag register + (unfortunately we must spend an extra instruction to do this: we + can't rely on a side effect of the previous MOV or ADD because + conditional modifiers which are normally true might be false in + exceptional circumstances, e.g. given a NaN input; the add to + brw_ip_reg() is not suitable because the IP is not an 8-vector). */ + brw_push_insn_state( p ); + brw_set_mask_control( p, BRW_MASK_DISABLE ); + brw_MOV( p, brw_flag_reg(), brw_imm_uw( 0xFF ) ); + brw_ADD( p, brw_ip_reg(), brw_ip_reg(), + brw_imm_d( ( loop - p->nr_insn ) << 4 ) ); + brw_pop_insn_state( p ); + + /* Patch the previous conditional branch now that we know the + destination address. */ + brw_set_src1( p->store + origin, + brw_imm_d( ( p->nr_insn - origin ) << 4 ) ); + + /* The very last interpolation. */ + brw_ADD( p, tmp[ 0 ], tmp[ 0 ], negate( w0 ) ); + brw_MUL( p, tmp[ 0 ], tmp[ 0 ], interp[ 3 ] ); + brw_ADD( p, tmp[ 0 ], tmp[ 0 ], w0 ); + + /* scale by pow( 2, -15 ), as described above */ + brw_MUL( p, param[ 0 ], tmp[ 0 ], brw_imm_f( 0.000030517578125 ) ); + + release_tmps( c, mark ); +} + +static void emit_noise4( struct brw_wm_compile *c, + struct prog_instruction *inst ) +{ + struct brw_compile *p = &c->func; + struct brw_reg src0, src1, src2, src3, param0, param1, param2, param3, dst; + GLuint mask = inst->DstReg.WriteMask; + int i; + int mark = mark_tmps( c ); + + assert( mark == 0 ); + + src0 = get_src_reg( c, inst->SrcReg, 0, 1 ); + src1 = get_src_reg( c, inst->SrcReg, 1, 1 ); + src2 = get_src_reg( c, inst->SrcReg, 2, 1 ); + src3 = get_src_reg( c, inst->SrcReg, 3, 1 ); + + param0 = alloc_tmp( c ); + param1 = alloc_tmp( c ); + param2 = alloc_tmp( c ); + param3 = alloc_tmp( c ); + + brw_MOV( p, param0, src0 ); + brw_MOV( p, param1, src1 ); + brw_MOV( p, param2, src2 ); + brw_MOV( p, param3, src3 ); + + invoke_subroutine( c, SUB_NOISE4, noise4_sub ); + + /* Fill in the result: */ + brw_set_saturate( p, inst->SaturateMode == SATURATE_ZERO_ONE ); + for (i = 0 ; i < 4; i++) { + if (mask & (1<<i)) { + dst = get_dst_reg(c, inst, i, 1); + brw_MOV( p, dst, param0 ); + } + } + if( inst->SaturateMode == SATURATE_ZERO_ONE ) + brw_set_saturate( p, 0 ); + + release_tmps( c, mark ); +} + static void emit_wpos_xy(struct brw_wm_compile *c, struct prog_instruction *inst) { @@ -1996,8 +2418,9 @@ static void brw_wm_emit_glsl(struct brw_context *brw, struct brw_wm_compile *c) case OPCODE_NOISE3: emit_noise3(c, inst); break; - /* case OPCODE_NOISE4: */ - /* not yet implemented */ + case OPCODE_NOISE4: + emit_noise4(c, inst); + break; case OPCODE_TEX: emit_tex(c, inst); break; |