3 files changed, 6 insertions, 22 deletions
diff --git a/src/mesa/drivers/dri/r300/r300_ioctl.c b/src/mesa/drivers/dri/r300/r300_ioctl.c
index a678922ae21..bc2c5091808 100644
--- a/src/mesa/drivers/dri/r300/r300_ioctl.c
+++ b/src/mesa/drivers/dri/r300/r300_ioctl.c
@@ -285,7 +285,7 @@ static void r300EmitClearState(GLcontext * ctx)
 
 	R300_STATECHANGE(r300, rr);
 	reg_start(R300_RS_INST_0, 0);
-	e32(R300_RS_ROUTE_0_COLOR);
+	e32(R300_RS_INST_COL_CN_WRITE);
 
 	R300_STATECHANGE(r300, fp);
 	reg_start(R300_PFS_CNTL_0, 2);
diff --git a/src/mesa/drivers/dri/r300/r300_reg.h b/src/mesa/drivers/dri/r300/r300_reg.h
index 3c52f16c30b..6fddc8fcf5b 100644
--- a/src/mesa/drivers/dri/r300/r300_reg.h
+++ b/src/mesa/drivers/dri/r300/r300_reg.h
@@ -1175,7 +1175,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #define R500_RS_INST_COL_CN_WRITE			(1 << 16)
 #define R500_RS_INST_COL_CN_WRITE_FBUFFER		(2 << 16)
 #define R500_RS_INST_COL_CN_WRITE_BACKFACE		(3 << 16)
-#define R500_RS_INST_COL_COL_ADDR_SHIFT			18
+#define R500_RS_INST_COL_ADDR_SHIFT			18
 #define R500_RS_INST_TEX_ADJ				(1 << 25)
 #define R500_RS_INST_W_CN				(1 << 26)
 
@@ -1194,27 +1194,11 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #	define R300_RS_INST_TEX_CN_WRITE 	(1 << 3)
 #	define R300_RS_INST_TEX_ADDR_SHIFT 	6
 #	define R300_RS_INST_COL_ID(x)		((x) << 11)
+#	define R300_RS_INST_COL_CN_WRITE	(1 << 14)
 #	define R300_RS_INST_COL_ADDR_SHIFT	17
 #	define R300_RS_INST_TEX_ADJ		(1 << 22)
 #	define R300_RS_COL_BIAS_UNUSED_SHIFT    23
 
-/* Special handling for color: When the fragment program uses color,
- * the ROUTE_0_COLOR bit is set and ROUTE_0_COLOR_DEST contains the
- * color register index.
- *
- * Apperently you may set the R300_RS_ROUTE_0_COLOR bit, but not provide any
- * R300_RS_ROUTE_0_COLOR_DEST value; this setup is used for clearing the state.
- * See r300_ioctl.c:r300EmitClearState. I'm not sure if this setup is strictly
- * correct or not. - Oliver.
- */
-#       define R300_RS_ROUTE_0_COLOR             (1 << 14)
-#       define R300_RS_ROUTE_0_COLOR_DEST_SHIFT  17
-#       define R300_RS_ROUTE_0_COLOR_DEST_MASK   (31 << 17) /* GUESS */
-/* As above, but for secondary color */
-#		define R300_RS_ROUTE_1_COLOR1            (1 << 14)
-#		define R300_RS_ROUTE_1_COLOR1_DEST_SHIFT 17
-#		define R300_RS_ROUTE_1_COLOR1_DEST_MASK  (31 << 17)
-#		define R300_RS_ROUTE_1_UNKNOWN11         (1 << 11)
 /* END: Rasterization / Interpolators - many guesses */
 
 /* Hierarchical Z Enable */
diff --git a/src/mesa/drivers/dri/r300/r300_state.c b/src/mesa/drivers/dri/r300/r300_state.c
index 4f87772d92a..ff96a3b49bb 100644
--- a/src/mesa/drivers/dri/r300/r300_state.c
+++ b/src/mesa/drivers/dri/r300/r300_state.c
@@ -1565,7 +1565,7 @@ static void r300SetupRSUnit(GLcontext * ctx)
 
 	if (InputsRead & FRAG_BIT_COL0) {
 		if (R300_OUTPUTS_WRITTEN_TEST(OutputsWritten, VERT_RESULT_COL0, _TNL_ATTRIB_COLOR0)) {
-			r300->hw.rr.cmd[R300_RR_INST_0] |= 0 | R300_RS_ROUTE_0_COLOR | (fp_reg++ << R300_RS_ROUTE_0_COLOR_DEST_SHIFT);
+			r300->hw.rr.cmd[R300_RR_INST_0] |= R300_RS_INST_COL_ID(0) | R300_RS_INST_COL_CN_WRITE | (fp_reg++ << R300_RS_INST_COL_ADDR_SHIFT);
 			InputsRead &= ~FRAG_BIT_COL0;
 			col_interp_nr++;
 		} else {
@@ -1575,7 +1575,7 @@ static void r300SetupRSUnit(GLcontext * ctx)
 
 	if (InputsRead & FRAG_BIT_COL1) {
 		if (R300_OUTPUTS_WRITTEN_TEST(OutputsWritten, VERT_RESULT_COL1, _TNL_ATTRIB_COLOR1)) {
-			r300->hw.rr.cmd[R300_RR_INST_1] |= R300_RS_ROUTE_1_UNKNOWN11 | R300_RS_ROUTE_1_COLOR1 | (fp_reg++ << R300_RS_ROUTE_1_COLOR1_DEST_SHIFT);
+			r300->hw.rr.cmd[R300_RR_INST_1] |= R300_RS_INST_COL_ID(1) | R300_RS_INST_COL_CN_WRITE | (fp_reg++ << R300_RS_INST_COL_ADDR_SHIFT);
 			InputsRead &= ~FRAG_BIT_COL1;
 			if (high_rr < 1)
 				high_rr = 1;
@@ -1587,7 +1587,7 @@ static void r300SetupRSUnit(GLcontext * ctx)
 
 	/* Need at least one. This might still lock as the values are undefined... */
 	if (in_texcoords == 0 && col_interp_nr == 0) {
-		r300->hw.rr.cmd[R300_RR_INST_0] |= 0 | R300_RS_ROUTE_0_COLOR | (fp_reg++ << R300_RS_ROUTE_0_COLOR_DEST_SHIFT);
+		r300->hw.rr.cmd[R300_RR_INST_0] |= R300_RS_INST_COL_ID(0) | R300_RS_INST_COL_CN_WRITE | (fp_reg++ << R300_RS_INST_COL_ADDR_SHIFT);
 		col_interp_nr++;
 	}