diff options
Diffstat (limited to 'src/mesa')
| -rw-r--r-- | src/mesa/drivers/dri/i965/intel_blit.c | 151 |
1 files changed, 84 insertions, 67 deletions
diff --git a/src/mesa/drivers/dri/i965/intel_blit.c b/src/mesa/drivers/dri/i965/intel_blit.c index 4944b8cf154..15e45d43b5b 100644 --- a/src/mesa/drivers/dri/i965/intel_blit.c +++ b/src/mesa/drivers/dri/i965/intel_blit.c @@ -215,6 +215,86 @@ get_blit_intratile_offset_el(const struct brw_context *brw, } } +static bool +emit_miptree_blit(struct brw_context *brw, + struct intel_mipmap_tree *src_mt, + uint32_t src_x, uint32_t src_y, + struct intel_mipmap_tree *dst_mt, + uint32_t dst_x, uint32_t dst_y, + uint32_t width, uint32_t height, + bool reverse, GLenum logicop) +{ + /* According to the Ivy Bridge PRM, Vol1 Part4, section 1.2.1.2 (Graphics + * Data Size Limitations): + * + * The BLT engine is capable of transferring very large quantities of + * graphics data. Any graphics data read from and written to the + * destination is permitted to represent a number of pixels that + * occupies up to 65,536 scan lines and up to 32,768 bytes per scan line + * at the destination. The maximum number of pixels that may be + * represented per scan line’s worth of graphics data depends on the + * color depth. + * + * Furthermore, intelEmitCopyBlit (which is called below) uses a signed + * 16-bit integer to represent buffer pitch, so it can only handle buffer + * pitches < 32k. However, the pitch is measured in bytes for linear buffers + * and dwords for tiled buffers. + * + * As a result of these two limitations, we can only use the blitter to do + * this copy when the miptree's pitch is less than 32k linear or 128k tiled. + */ + if (blt_pitch(src_mt) >= 32768 || blt_pitch(dst_mt) >= 32768) { + perf_debug("Falling back due to >= 32k/128k pitch\n"); + return false; + } + + /* We need to split the blit into chunks that each fit within the blitter's + * restrictions. We can't use a chunk size of 32768 because we need to + * ensure that src_tile_x + chunk_size fits. We choose 16384 because it's + * a nice round power of two, big enough that performance won't suffer, and + * small enough to guarantee everything fits. + */ + const uint32_t max_chunk_size = 16384; + + for (uint32_t chunk_x = 0; chunk_x < width; chunk_x += max_chunk_size) { + for (uint32_t chunk_y = 0; chunk_y < height; chunk_y += max_chunk_size) { + const uint32_t chunk_w = MIN2(max_chunk_size, width - chunk_x); + const uint32_t chunk_h = MIN2(max_chunk_size, height - chunk_y); + + uint32_t src_offset, src_tile_x, src_tile_y; + get_blit_intratile_offset_el(brw, src_mt, + src_x + chunk_x, src_y + chunk_y, + &src_offset, &src_tile_x, &src_tile_y); + + uint32_t dst_offset, dst_tile_x, dst_tile_y; + get_blit_intratile_offset_el(brw, dst_mt, + dst_x + chunk_x, dst_y + chunk_y, + &dst_offset, &dst_tile_x, &dst_tile_y); + + if (!intelEmitCopyBlit(brw, + src_mt->cpp, + reverse ? -src_mt->pitch : src_mt->pitch, + src_mt->bo, src_mt->offset + src_offset, + src_mt->tiling, + src_mt->tr_mode, + dst_mt->pitch, + dst_mt->bo, dst_mt->offset + dst_offset, + dst_mt->tiling, + dst_mt->tr_mode, + src_tile_x, src_tile_y, + dst_tile_x, dst_tile_y, + chunk_w, chunk_h, + logicop)) { + /* If this is ever going to fail, it will fail on the first chunk */ + assert(chunk_x == 0 && chunk_y == 0); + return false; + } + } + } + + return true; +} + /** * Implements a rectangular block transfer (blit) of pixels between two * miptrees. @@ -265,30 +345,6 @@ intel_miptree_blit(struct brw_context *brw, return false; } - /* According to the Ivy Bridge PRM, Vol1 Part4, section 1.2.1.2 (Graphics - * Data Size Limitations): - * - * The BLT engine is capable of transferring very large quantities of - * graphics data. Any graphics data read from and written to the - * destination is permitted to represent a number of pixels that - * occupies up to 65,536 scan lines and up to 32,768 bytes per scan line - * at the destination. The maximum number of pixels that may be - * represented per scan line’s worth of graphics data depends on the - * color depth. - * - * Furthermore, intelEmitCopyBlit (which is called below) uses a signed - * 16-bit integer to represent buffer pitch, so it can only handle buffer - * pitches < 32k. However, the pitch is measured in bytes for linear buffers - * and dwords for tiled buffers. - * - * As a result of these two limitations, we can only use the blitter to do - * this copy when the miptree's pitch is less than 32k linear or 128k tiled. - */ - if (blt_pitch(src_mt) >= 32768 || blt_pitch(dst_mt) >= 32768) { - perf_debug("Falling back due to >= 32k/128k pitch\n"); - return false; - } - /* The blitter has no idea about HiZ or fast color clears, so we need to * resolve the miptrees before we do anything. */ @@ -313,49 +369,10 @@ intel_miptree_blit(struct brw_context *brw, dst_x += dst_image_x; dst_y += dst_image_y; - /* We need to split the blit into chunks that each fit within the blitter's - * restrictions. We can't use a chunk size of 32768 because we need to - * ensure that src_tile_x + chunk_size fits. We choose 16384 because it's - * a nice round power of two, big enough that performance won't suffer, and - * small enough to guarantee everything fits. - */ - const uint32_t max_chunk_size = 16384; - - for (uint32_t chunk_x = 0; chunk_x < width; chunk_x += max_chunk_size) { - for (uint32_t chunk_y = 0; chunk_y < height; chunk_y += max_chunk_size) { - const uint32_t chunk_w = MIN2(max_chunk_size, width - chunk_x); - const uint32_t chunk_h = MIN2(max_chunk_size, height - chunk_y); - - uint32_t src_offset, src_tile_x, src_tile_y; - get_blit_intratile_offset_el(brw, src_mt, - src_x + chunk_x, src_y + chunk_y, - &src_offset, &src_tile_x, &src_tile_y); - - uint32_t dst_offset, dst_tile_x, dst_tile_y; - get_blit_intratile_offset_el(brw, dst_mt, - dst_x + chunk_x, dst_y + chunk_y, - &dst_offset, &dst_tile_x, &dst_tile_y); - - if (!intelEmitCopyBlit(brw, - src_mt->cpp, - src_flip == dst_flip ? src_mt->pitch : - -src_mt->pitch, - src_mt->bo, src_mt->offset + src_offset, - src_mt->tiling, - src_mt->tr_mode, - dst_mt->pitch, - dst_mt->bo, dst_mt->offset + dst_offset, - dst_mt->tiling, - dst_mt->tr_mode, - src_tile_x, src_tile_y, - dst_tile_x, dst_tile_y, - chunk_w, chunk_h, - logicop)) { - /* If this is ever going to fail, it will fail on the first chunk */ - assert(chunk_x == 0 && chunk_y == 0); - return false; - } - } + if (!emit_miptree_blit(brw, src_mt, src_x, src_y, + dst_mt, dst_x, dst_y, width, height, + src_flip != dst_flip, logicop)) { + return false; } /* XXX This could be done in a single pass using XY_FULL_MONO_PATTERN_BLT */ |