diff options
Diffstat (limited to 'src/mesa')
-rw-r--r-- | src/mesa/drivers/dri/i965/brw_fs.cpp | 264 |
1 files changed, 134 insertions, 130 deletions
diff --git a/src/mesa/drivers/dri/i965/brw_fs.cpp b/src/mesa/drivers/dri/i965/brw_fs.cpp index 0278237101e..17f0eaba311 100644 --- a/src/mesa/drivers/dri/i965/brw_fs.cpp +++ b/src/mesa/drivers/dri/i965/brw_fs.cpp @@ -3129,155 +3129,159 @@ fs_visitor::lower_integer_multiplication() { bool progress = false; - /* Gen8's MUL instruction can do a 32-bit x 32-bit -> 32-bit operation - * directly, but CHV/BXT cannot. - */ - if (devinfo->gen >= 8 && !devinfo->is_cherryview && !devinfo->is_broxton) - return false; - foreach_block_and_inst_safe(block, fs_inst, inst, cfg) { - if (inst->opcode != BRW_OPCODE_MUL || - inst->dst.is_accumulator() || - (inst->dst.type != BRW_REGISTER_TYPE_D && - inst->dst.type != BRW_REGISTER_TYPE_UD)) - continue; - const fs_builder ibld(this, block, inst); - /* The MUL instruction isn't commutative. On Gen <= 6, only the low - * 16-bits of src0 are read, and on Gen >= 7 only the low 16-bits of - * src1 are used. - * - * If multiplying by an immediate value that fits in 16-bits, do a - * single MUL instruction with that value in the proper location. - */ - if (inst->src[1].file == IMM && - inst->src[1].fixed_hw_reg.dw1.ud < (1 << 16)) { - if (devinfo->gen < 7) { - fs_reg imm(GRF, alloc.allocate(dispatch_width / 8), - inst->dst.type); - ibld.MOV(imm, inst->src[1]); - ibld.MUL(inst->dst, imm, inst->src[0]); - } else { - ibld.MUL(inst->dst, inst->src[0], inst->src[1]); - } - } else { - /* Gen < 8 (and some Gen8+ low-power parts like Cherryview) cannot - * do 32-bit integer multiplication in one instruction, but instead - * must do a sequence (which actually calculates a 64-bit result): - * - * mul(8) acc0<1>D g3<8,8,1>D g4<8,8,1>D - * mach(8) null g3<8,8,1>D g4<8,8,1>D - * mov(8) g2<1>D acc0<8,8,1>D - * - * But on Gen > 6, the ability to use second accumulator register - * (acc1) for non-float data types was removed, preventing a simple - * implementation in SIMD16. A 16-channel result can be calculated by - * executing the three instructions twice in SIMD8, once with quarter - * control of 1Q for the first eight channels and again with 2Q for - * the second eight channels. - * - * Which accumulator register is implicitly accessed (by AccWrEnable - * for instance) is determined by the quarter control. Unfortunately - * Ivybridge (and presumably Baytrail) has a hardware bug in which an - * implicit accumulator access by an instruction with 2Q will access - * acc1 regardless of whether the data type is usable in acc1. - * - * Specifically, the 2Q mach(8) writes acc1 which does not exist for - * integer data types. - * - * Since we only want the low 32-bits of the result, we can do two - * 32-bit x 16-bit multiplies (like the mul and mach are doing), and - * adjust the high result and add them (like the mach is doing): - * - * mul(8) g7<1>D g3<8,8,1>D g4.0<8,8,1>UW - * mul(8) g8<1>D g3<8,8,1>D g4.1<8,8,1>UW - * shl(8) g9<1>D g8<8,8,1>D 16D - * add(8) g2<1>D g7<8,8,1>D g8<8,8,1>D - * - * We avoid the shl instruction by realizing that we only want to add - * the low 16-bits of the "high" result to the high 16-bits of the - * "low" result and using proper regioning on the add: - * - * mul(8) g7<1>D g3<8,8,1>D g4.0<16,8,2>UW - * mul(8) g8<1>D g3<8,8,1>D g4.1<16,8,2>UW - * add(8) g7.1<2>UW g7.1<16,8,2>UW g8<16,8,2>UW - * - * Since it does not use the (single) accumulator register, we can - * schedule multi-component multiplications much better. + if (inst->opcode == BRW_OPCODE_MUL) { + if (inst->dst.is_accumulator() || + (inst->dst.type != BRW_REGISTER_TYPE_D && + inst->dst.type != BRW_REGISTER_TYPE_UD)) + continue; + + /* Gen8's MUL instruction can do a 32-bit x 32-bit -> 32-bit + * operation directly, but CHV/BXT cannot. */ + if (devinfo->gen >= 8 && + !devinfo->is_cherryview && !devinfo->is_broxton) + continue; - if (inst->conditional_mod && inst->dst.is_null()) { - inst->dst = fs_reg(GRF, alloc.allocate(dispatch_width / 8), - inst->dst.type); - } - fs_reg low = inst->dst; - fs_reg high(GRF, alloc.allocate(dispatch_width / 8), - inst->dst.type); + if (inst->src[1].file == IMM && + inst->src[1].fixed_hw_reg.dw1.ud < (1 << 16)) { + /* The MUL instruction isn't commutative. On Gen <= 6, only the low + * 16-bits of src0 are read, and on Gen >= 7 only the low 16-bits of + * src1 are used. + * + * If multiplying by an immediate value that fits in 16-bits, do a + * single MUL instruction with that value in the proper location. + */ + if (devinfo->gen < 7) { + fs_reg imm(GRF, alloc.allocate(dispatch_width / 8), + inst->dst.type); + ibld.MOV(imm, inst->src[1]); + ibld.MUL(inst->dst, imm, inst->src[0]); + } else { + ibld.MUL(inst->dst, inst->src[0], inst->src[1]); + } + } else { + /* Gen < 8 (and some Gen8+ low-power parts like Cherryview) cannot + * do 32-bit integer multiplication in one instruction, but instead + * must do a sequence (which actually calculates a 64-bit result): + * + * mul(8) acc0<1>D g3<8,8,1>D g4<8,8,1>D + * mach(8) null g3<8,8,1>D g4<8,8,1>D + * mov(8) g2<1>D acc0<8,8,1>D + * + * But on Gen > 6, the ability to use second accumulator register + * (acc1) for non-float data types was removed, preventing a simple + * implementation in SIMD16. A 16-channel result can be calculated by + * executing the three instructions twice in SIMD8, once with quarter + * control of 1Q for the first eight channels and again with 2Q for + * the second eight channels. + * + * Which accumulator register is implicitly accessed (by AccWrEnable + * for instance) is determined by the quarter control. Unfortunately + * Ivybridge (and presumably Baytrail) has a hardware bug in which an + * implicit accumulator access by an instruction with 2Q will access + * acc1 regardless of whether the data type is usable in acc1. + * + * Specifically, the 2Q mach(8) writes acc1 which does not exist for + * integer data types. + * + * Since we only want the low 32-bits of the result, we can do two + * 32-bit x 16-bit multiplies (like the mul and mach are doing), and + * adjust the high result and add them (like the mach is doing): + * + * mul(8) g7<1>D g3<8,8,1>D g4.0<8,8,1>UW + * mul(8) g8<1>D g3<8,8,1>D g4.1<8,8,1>UW + * shl(8) g9<1>D g8<8,8,1>D 16D + * add(8) g2<1>D g7<8,8,1>D g8<8,8,1>D + * + * We avoid the shl instruction by realizing that we only want to add + * the low 16-bits of the "high" result to the high 16-bits of the + * "low" result and using proper regioning on the add: + * + * mul(8) g7<1>D g3<8,8,1>D g4.0<16,8,2>UW + * mul(8) g8<1>D g3<8,8,1>D g4.1<16,8,2>UW + * add(8) g7.1<2>UW g7.1<16,8,2>UW g8<16,8,2>UW + * + * Since it does not use the (single) accumulator register, we can + * schedule multi-component multiplications much better. + */ - if (devinfo->gen >= 7) { - fs_reg src1_0_w = inst->src[1]; - fs_reg src1_1_w = inst->src[1]; + if (inst->conditional_mod && inst->dst.is_null()) { + inst->dst = fs_reg(GRF, alloc.allocate(dispatch_width / 8), + inst->dst.type); + } + fs_reg low = inst->dst; + fs_reg high(GRF, alloc.allocate(dispatch_width / 8), + inst->dst.type); - if (inst->src[1].file == IMM) { - src1_0_w.fixed_hw_reg.dw1.ud &= 0xffff; - src1_1_w.fixed_hw_reg.dw1.ud >>= 16; - } else { - src1_0_w.type = BRW_REGISTER_TYPE_UW; - if (src1_0_w.stride != 0) { - assert(src1_0_w.stride == 1); - src1_0_w.stride = 2; + if (devinfo->gen >= 7) { + fs_reg src1_0_w = inst->src[1]; + fs_reg src1_1_w = inst->src[1]; + + if (inst->src[1].file == IMM) { + src1_0_w.fixed_hw_reg.dw1.ud &= 0xffff; + src1_1_w.fixed_hw_reg.dw1.ud >>= 16; + } else { + src1_0_w.type = BRW_REGISTER_TYPE_UW; + if (src1_0_w.stride != 0) { + assert(src1_0_w.stride == 1); + src1_0_w.stride = 2; + } + + src1_1_w.type = BRW_REGISTER_TYPE_UW; + if (src1_1_w.stride != 0) { + assert(src1_1_w.stride == 1); + src1_1_w.stride = 2; + } + src1_1_w.subreg_offset += type_sz(BRW_REGISTER_TYPE_UW); } + ibld.MUL(low, inst->src[0], src1_0_w); + ibld.MUL(high, inst->src[0], src1_1_w); + } else { + fs_reg src0_0_w = inst->src[0]; + fs_reg src0_1_w = inst->src[0]; - src1_1_w.type = BRW_REGISTER_TYPE_UW; - if (src1_1_w.stride != 0) { - assert(src1_1_w.stride == 1); - src1_1_w.stride = 2; + src0_0_w.type = BRW_REGISTER_TYPE_UW; + if (src0_0_w.stride != 0) { + assert(src0_0_w.stride == 1); + src0_0_w.stride = 2; } - src1_1_w.subreg_offset += type_sz(BRW_REGISTER_TYPE_UW); - } - ibld.MUL(low, inst->src[0], src1_0_w); - ibld.MUL(high, inst->src[0], src1_1_w); - } else { - fs_reg src0_0_w = inst->src[0]; - fs_reg src0_1_w = inst->src[0]; - src0_0_w.type = BRW_REGISTER_TYPE_UW; - if (src0_0_w.stride != 0) { - assert(src0_0_w.stride == 1); - src0_0_w.stride = 2; - } + src0_1_w.type = BRW_REGISTER_TYPE_UW; + if (src0_1_w.stride != 0) { + assert(src0_1_w.stride == 1); + src0_1_w.stride = 2; + } + src0_1_w.subreg_offset += type_sz(BRW_REGISTER_TYPE_UW); - src0_1_w.type = BRW_REGISTER_TYPE_UW; - if (src0_1_w.stride != 0) { - assert(src0_1_w.stride == 1); - src0_1_w.stride = 2; + ibld.MUL(low, src0_0_w, inst->src[1]); + ibld.MUL(high, src0_1_w, inst->src[1]); } - src0_1_w.subreg_offset += type_sz(BRW_REGISTER_TYPE_UW); - ibld.MUL(low, src0_0_w, inst->src[1]); - ibld.MUL(high, src0_1_w, inst->src[1]); - } - - fs_reg dst = inst->dst; - dst.type = BRW_REGISTER_TYPE_UW; - dst.subreg_offset = 2; - dst.stride = 2; + fs_reg dst = inst->dst; + dst.type = BRW_REGISTER_TYPE_UW; + dst.subreg_offset = 2; + dst.stride = 2; - high.type = BRW_REGISTER_TYPE_UW; - high.stride = 2; + high.type = BRW_REGISTER_TYPE_UW; + high.stride = 2; - low.type = BRW_REGISTER_TYPE_UW; - low.subreg_offset = 2; - low.stride = 2; + low.type = BRW_REGISTER_TYPE_UW; + low.subreg_offset = 2; + low.stride = 2; - ibld.ADD(dst, low, high); + ibld.ADD(dst, low, high); - if (inst->conditional_mod) { - fs_reg null(retype(ibld.null_reg_f(), inst->dst.type)); - set_condmod(inst->conditional_mod, - ibld.MOV(null, inst->dst)); + if (inst->conditional_mod) { + fs_reg null(retype(ibld.null_reg_f(), inst->dst.type)); + set_condmod(inst->conditional_mod, + ibld.MOV(null, inst->dst)); + } } + } else { + continue; } inst->remove(block); |