diff options
Diffstat (limited to 'src/mesa/drivers')
-rw-r--r-- | src/mesa/drivers/dri/savage/savage_xmesa.c | 14 | ||||
-rw-r--r-- | src/mesa/drivers/dri/savage/savagetex.c | 217 |
2 files changed, 200 insertions, 31 deletions
diff --git a/src/mesa/drivers/dri/savage/savage_xmesa.c b/src/mesa/drivers/dri/savage/savage_xmesa.c index 0b3dbbd03ca..485bc77458d 100644 --- a/src/mesa/drivers/dri/savage/savage_xmesa.c +++ b/src/mesa/drivers/dri/savage/savage_xmesa.c @@ -34,6 +34,8 @@ #include "utils.h" +#include "extensions.h" + #include "swrast/swrast.h" #include "swrast_setup/swrast_setup.h" #include "tnl/tnl.h" @@ -90,12 +92,13 @@ DRI_CONF_BEGIN SAVAGE_SYNC_FRAMES(false) DRI_CONF_MAX_TEXTURE_UNITS(2,1,2) DRI_CONF_TEXTURE_HEAPS(DRI_CONF_TEXTURE_HEAPS_ALL) + DRI_CONF_FORCE_S3TC_ENABLE(false) DRI_CONF_SECTION_END DRI_CONF_SECTION_DEBUG DRI_CONF_NO_RAST(false) DRI_CONF_SECTION_END DRI_CONF_END; -static const GLuint __driNConfigOptions = 9; +static const GLuint __driNConfigOptions = 10; #ifdef USE_NEW_INTERFACE static PFNGLXCREATECONTEXTMODES create_context_modes = NULL; @@ -127,6 +130,7 @@ static const char *const common_extensions[] = { "GL_ARB_multitexture", "GL_EXT_texture_lod_bias", + "GL_ARB_texture_compression", NULL }; static const char *const s4_extensions[] = @@ -529,6 +533,14 @@ savageCreateContext( const __GLcontextModes *mesaVis, driInitExtensions( ctx, common_extensions, GL_TRUE ); if (savageScreen->chipset >= S3_SAVAGE4) driInitExtensions( ctx, s4_extensions, GL_FALSE ); + if (ctx->Mesa_DXTn || + driQueryOptionb (&imesa->optionCache, "force_s3tc_enable")) { + _mesa_enable_extension( ctx, "GL_S3_s3tc" ); + if (savageScreen->chipset >= S3_SAVAGE4) + /* This extension needs DXT3 and DTX5 support in hardware. + * Not available on Savage3D/MX/IX. */ + _mesa_enable_extension( ctx, "GL_EXT_texture_compression_s3tc" ); + } savageDDInitStateFuncs( ctx ); savageDDInitSpanFuncs( ctx ); diff --git a/src/mesa/drivers/dri/savage/savagetex.c b/src/mesa/drivers/dri/savage/savagetex.c index 0acfc2117b1..060a422c7ac 100644 --- a/src/mesa/drivers/dri/savage/savagetex.c +++ b/src/mesa/drivers/dri/savage/savagetex.c @@ -49,11 +49,21 @@ #include "xmlpool.h" +#define TILE_INDEX_DXT1 0 +#define TILE_INDEX_8 1 +#define TILE_INDEX_16 2 +#define TILE_INDEX_DXTn 3 +#define TILE_INDEX_32 4 + /* On Savage4 the texure LOD-bias needs an offset of ~ 0.3 to get * somewhere close to software rendering. */ #define SAVAGE4_LOD_OFFSET 10 +/* Tile info for S3TC formats counts in 4x4 blocks instead of texels. + * In DXT1 each block is encoded in 64 bits. In DXT3 and 5 each block is + * encoded in 128 bits. */ + /* Size 1, 2 and 4 images are packed into the last subtile. Each image * is repeated to fill a 4x4 pixel area. The figure below shows the * layout of those 4x4 pixel areas in the 8x8 subtile. @@ -64,10 +74,10 @@ * Yuck! 8-bit texture formats use 4x8 subtiles. See below. */ static const savageTileInfo tileInfo_pro[5] = { - {64, 64, 8, 8, 8, 8, {0x12, 0x02}}, /* 4-bit */ + {16, 16, 16, 8, 1, 2, {0x18, 0x10}}, /* DXT1 */ {64, 32, 16, 4, 4, 8, {0x30, 0x20}}, /* 8-bit */ {64, 16, 8, 2, 8, 8, {0x48, 0x08}}, /* 16-bit */ - { 0, 0, 0, 0, 0, 0, {0x00, 0x00}}, /* 24-bit */ + {16, 8, 16, 4, 1, 2, {0x30, 0x20}}, /* DXT3, DXT5 */ {32, 16, 4, 2, 8, 8, {0x90, 0x10}}, /* 32-bit */ }; @@ -79,10 +89,10 @@ static const savageTileInfo tileInfo_pro[5] = { * x 1 */ static const savageTileInfo tileInfo_s3d_s4[5] = { - {64, 64, 16, 8, 4, 8, {0x18, 0x10}}, /* 4-bit */ + {16, 16, 16, 8, 1, 2, {0x18, 0x10}}, /* DXT1 */ {64, 32, 16, 4, 4, 8, {0x30, 0x20}}, /* 8-bit */ {64, 16, 16, 2, 4, 8, {0x60, 0x40}}, /* 16-bit */ - { 0, 0, 0, 0, 0, 0, {0x00, 0x00}}, /* 24-bit */ + {16, 8, 16, 4, 1, 2, {0x30, 0x20}}, /* DXT3, DXT5 */ {32, 16, 8, 2, 4, 8, {0xc0, 0x80}}, /* 32-bit */ }; @@ -109,6 +119,9 @@ SUBTILE_FUNC(8, 8) SUBTILE_FUNC(16, 8) SUBTILE_FUNC(32, 8) /* 4 bytes per pixel, 8 pixels wide */ +SUBTILE_FUNC(8, 2) /* DXT1 */ +SUBTILE_FUNC(16, 2) /* DXT3 and DXT5 */ + /** \brief Upload a complete tile from src (srcStride) to dest * * \param tileInfo Pointer to tiling information @@ -138,8 +151,10 @@ static void savageUploadTile (const savageTileInfo *tileInfo, switch (subStride) { case 2: subtileFunc = savageUploadSubtile_2x8; break; case 4: subtileFunc = savageUploadSubtile_4x8; break; - case 8: subtileFunc = savageUploadSubtile_8x8; break; - case 16: subtileFunc = savageUploadSubtile_16x8; break; + case 8: subtileFunc = tileInfo->subHeight == 8 ? + savageUploadSubtile_8x8 : savageUploadSubtile_8x2; break; + case 16: subtileFunc = tileInfo->subHeight == 8 ? + savageUploadSubtile_16x8 : savageUploadSubtile_16x2; break; case 32: subtileFunc = savageUploadSubtile_32x8; break; default: assert(0); } @@ -172,9 +187,10 @@ static void savageUploadTile (const savageTileInfo *tileInfo, * FIXME: Repeating inside this function would be more efficient. */ static void savageUploadTiny (const savageTileInfo *tileInfo, + GLuint pixWidth, GLuint pixHeight, GLuint width, GLuint height, GLuint bpp, GLubyte *src, GLubyte *dest) { - GLuint size = MAX2(width, height); + GLuint size = MAX2(pixWidth, pixHeight); if (width > tileInfo->subWidth) { /* assert: height <= subtile height */ GLuint wInSub = width / tileInfo->subWidth; @@ -197,14 +213,15 @@ static void savageUploadTiny (const savageTileInfo *tileInfo, GLuint srcStride = width * bpp; GLuint subStride = tileInfo->subWidth * bpp; /* if the subtile width is 4 we have to skip every other subtile */ - GLuint subSkip = tileInfo->subWidth == 4 ? + GLuint subSkip = tileInfo->subWidth <= 4 ? subStride * tileInfo->subHeight : 0; + GLuint skipRemainder = tileInfo->subHeight - 1; GLuint y; for (y = 0; y < height; ++y) { memcpy (dest, src, srcStride); src += srcStride; dest += subStride; - if ((y & 7) == 7) + if ((y & skipRemainder) == skipRemainder) dest += subSkip; } } else { /* the last 3 mipmap levels */ @@ -226,8 +243,9 @@ static void savageUploadTexLevel( savageTexObjPtr t, int level ) { const struct gl_texture_image *image = t->base.tObj->Image[0][level]; const savageTileInfo *tileInfo = t->tileInfo; - GLuint width = image->Width2, height = image->Height2; + GLuint pixWidth = image->Width2, pixHeight = image->Height2; GLuint bpp = t->texelBytes; + GLuint width, height; /* FIXME: Need triangle (rather than pixel) fallbacks to simulate * this using normal textured triangles. @@ -238,7 +256,16 @@ static void savageUploadTexLevel( savageTexObjPtr t, int level ) fprintf (stderr, "Not supported texture border %d.\n", (int) image->Border); - if (width >= 8 && height >= tileInfo->subHeight) { + if (t->hwFormat == TFT_S3TC4A4Bit || t->hwFormat == TFT_S3TC4CA4Bit || + t->hwFormat == TFT_S3TC4Bit) { + width = (pixWidth+3) / 4; + height = (pixHeight+3) / 4; + } else { + width = pixWidth; + height = pixHeight; + } + + if (pixWidth >= 8 && pixHeight >= 8) { GLuint *dirtyPtr = t->image[level].dirtyTiles; GLuint dirtyMask = 1; @@ -303,19 +330,22 @@ static void savageUploadTexLevel( savageTexObjPtr t, int level ) } } else { GLuint minHeight, minWidth, hRepeat, vRepeat, x, y; - if (width > 4 || height > 4) { + if (t->hwFormat == TFT_S3TC4A4Bit || t->hwFormat == TFT_S3TC4CA4Bit || + t->hwFormat == TFT_S3TC4Bit) + minWidth = minHeight = 1; + else + minWidth = minHeight = 4; + if (width > minWidth || height > minHeight) { minWidth = tileInfo->subWidth; minHeight = tileInfo->subHeight; - } else { - minWidth = 4; - minHeight = 4; } hRepeat = width >= minWidth ? 1 : minWidth / width; vRepeat = height >= minHeight ? 1 : minHeight / height; for (y = 0; y < vRepeat; ++y) { GLuint offset = y * tileInfo->subWidth*height * bpp; for (x = 0; x < hRepeat; ++x) { - savageUploadTiny (tileInfo, width, height, bpp, image->Data, + savageUploadTiny (tileInfo, pixWidth, pixHeight, + width, height, bpp, image->Data, (GLubyte *)(t->bufAddr + t->image[level].offset+offset)); offset += width * bpp; @@ -345,6 +375,30 @@ static GLuint savageTexImageSize (GLuint width, GLuint height, GLuint bpp) { return 64 * bpp; } +/** \brief Compute the destination size of a compressed texture image + */ +static GLuint savageCompressedTexImageSize (GLuint width, GLuint height, + GLuint bpp) { + width = (width+3) / 4; + height = (height+3) / 4; + /* full subtiles */ + if (width >= 2 && height >= 2) + return width * height * bpp; + /* special case for the last three mipmap levels: the hardware computes + * the offset internally */ + else if (width <= 1 && height <= 1) + return 0; + /* partially filled sub tiles waste memory + * on Savage3D and Savage4 with subtile width 4 every other subtile is + * skipped if width < 8 so we can assume a uniform subtile width of 8 */ + else if (width >= 2) + return width * 2 * bpp; + else if (height >= 2) + return 2 * height * bpp; + else + return 4 * bpp; +} + /** \brief Compute the number of (partial) tiles of a texture image */ static GLuint savageTexImageTiles (GLuint width, GLuint height, @@ -770,6 +824,26 @@ savageChooseTextureFormat( GLcontext *ctx, GLint internalFormat, return !force16bpt ? &_mesa_texformat_argb8888 : &_mesa_texformat_argb4444; #endif + + case GL_RGB_S3TC: + case GL_RGB4_S3TC: + case GL_COMPRESSED_RGB_S3TC_DXT1_EXT: + return &_mesa_texformat_rgb_dxt1; + case GL_COMPRESSED_RGBA_S3TC_DXT1_EXT: + return &_mesa_texformat_rgba_dxt1; + + case GL_COMPRESSED_RGBA_S3TC_DXT3_EXT: + return &_mesa_texformat_rgba_dxt3; + + case GL_RGBA_S3TC: + case GL_RGBA4_S3TC: + if (!isSavage4) + /* Not the best choice but Savage3D/MX/IX don't support DXT3 or DXT5. */ + return &_mesa_texformat_rgba_dxt1; + /* fall through */ + case GL_COMPRESSED_RGBA_S3TC_DXT5_EXT: + return &_mesa_texformat_rgba_dxt5; + /* case GL_COLOR_INDEX: case GL_COLOR_INDEX1_EXT: @@ -791,7 +865,7 @@ static void savageSetTexImages( savageContextPtr imesa, { savageTexObjPtr t = (savageTexObjPtr) tObj->DriverData; struct gl_texture_image *image = tObj->Image[0][tObj->BaseLevel]; - GLuint offset, i, textureFormat, size; + GLuint offset, i, textureFormat, tileIndex, size; GLint firstLevel, lastLevel; assert(t); @@ -800,31 +874,51 @@ static void savageSetTexImages( savageContextPtr imesa, switch (image->TexFormat->MesaFormat) { case MESA_FORMAT_ARGB8888: textureFormat = TFT_ARGB8888; - t->texelBytes = 4; + t->texelBytes = tileIndex = 4; break; case MESA_FORMAT_ARGB1555: textureFormat = TFT_ARGB1555; - t->texelBytes = 2; + t->texelBytes = tileIndex = 2; break; case MESA_FORMAT_ARGB4444: textureFormat = TFT_ARGB4444; - t->texelBytes = 2; + t->texelBytes = tileIndex = 2; break; case MESA_FORMAT_RGB565: textureFormat = TFT_RGB565; - t->texelBytes = 2; + t->texelBytes = tileIndex = 2; break; case MESA_FORMAT_L8: textureFormat = TFT_L8; - t->texelBytes = 1; + t->texelBytes = tileIndex = 1; break; case MESA_FORMAT_I8: textureFormat = TFT_I8; - t->texelBytes = 1; + t->texelBytes = tileIndex = 1; break; case MESA_FORMAT_A8: textureFormat = TFT_A8; - t->texelBytes = 1; + t->texelBytes = tileIndex = 1; + break; + case MESA_FORMAT_RGB_DXT1: + textureFormat = TFT_S3TC4Bit; + tileIndex = TILE_INDEX_DXT1; + t->texelBytes = 8; + break; + case MESA_FORMAT_RGBA_DXT1: + textureFormat = TFT_S3TC4Bit; + tileIndex = TILE_INDEX_DXT1; + t->texelBytes = 8; + break; + case MESA_FORMAT_RGBA_DXT3: + textureFormat = TFT_S3TC4A4Bit; + tileIndex = TILE_INDEX_DXTn; + t->texelBytes = 16; + break; + case MESA_FORMAT_RGBA_DXT5: + textureFormat = TFT_S3TC4CA4Bit; + tileIndex = TILE_INDEX_DXTn; + t->texelBytes = 16; break; default: _mesa_problem(imesa->glCtx, "Bad texture format in %s", __FUNCTION__); @@ -832,11 +926,11 @@ static void savageSetTexImages( savageContextPtr imesa, } t->hwFormat = textureFormat; - /* Select tiling format depending on the chipset and bytes per texel */ + /* Select tiling format depending on the chipset and texture format */ if (imesa->savageScreen->chipset <= S3_SAVAGE4) - t->tileInfo = &tileInfo_s3d_s4[t->texelBytes]; + t->tileInfo = &tileInfo_s3d_s4[tileIndex]; else - t->tileInfo = &tileInfo_pro[t->texelBytes]; + t->tileInfo = &tileInfo_pro[tileIndex]; /* Compute which mipmap levels we really want to send to the hardware. */ @@ -868,8 +962,12 @@ static void savageSetTexImages( savageContextPtr imesa, t->image[i].offset = offset; image = tObj->Image[0][i]; - size = savageTexImageSize (image->Width2, image->Height2, - t->texelBytes); + if (t->texelBytes >= 8) + size = savageCompressedTexImageSize (image->Width2, image->Height2, + t->texelBytes); + else + size = savageTexImageSize (image->Width2, image->Height2, + t->texelBytes); offset += size; } @@ -878,7 +976,7 @@ static void savageSetTexImages( savageContextPtr imesa, /* the last three mipmap levels don't add to the offset. They are packed * into 64 pixels. */ if (size == 0) - t->base.totalSize += 64 * t->texelBytes; + t->base.totalSize += (t->texelBytes >= 8 ? 4 : 64) * t->texelBytes; /* 2k-aligned (really needed?) */ t->base.totalSize = (t->base.totalSize + 2047UL) & ~2047UL; } @@ -1868,6 +1966,63 @@ static void savageTexSubImage2D( GLcontext *ctx, SAVAGE_CONTEXT(ctx)->new_state |= SAVAGE_NEW_TEXTURE; } +static void +savageCompressedTexImage2D( GLcontext *ctx, GLenum target, GLint level, + GLint internalFormat, + GLint width, GLint height, GLint border, + GLsizei imageSize, const GLvoid *data, + struct gl_texture_object *texObj, + struct gl_texture_image *texImage ) +{ + savageTexObjPtr t = (savageTexObjPtr) texObj->DriverData; + if (t) { + savageTexImageChanged (t); + } else { + t = savageAllocTexObj(texObj); + if (!t) { + _mesa_error(ctx, GL_OUT_OF_MEMORY, "glCompressedTexImage2D"); + return; + } + } + _mesa_store_compressed_teximage2d( ctx, target, level, internalFormat, + width, height, border, imageSize, + data, texObj, texImage ); + t->base.dirty_images[0] |= (1 << level); + SAVAGE_CONTEXT(ctx)->new_state |= SAVAGE_NEW_TEXTURE; +} + +static void +savageCompressedTexSubImage2D( GLcontext *ctx, + GLenum target, + GLint level, + GLint xoffset, GLint yoffset, + GLsizei width, GLsizei height, + GLenum format, GLsizei imageSize, + const GLvoid *data, + struct gl_texture_object *texObj, + struct gl_texture_image *texImage ) +{ + savageTexObjPtr t = (savageTexObjPtr) texObj->DriverData; + assert( t ); /* this _should_ be true */ + if (t) { + savageTexImageChanged (t); + savageMarkDirtyTiles(t, level, texImage->Width2, texImage->Height2, + xoffset, yoffset, width, height); + } else { + t = savageAllocTexObj(texObj); + if (!t) { + _mesa_error(ctx, GL_OUT_OF_MEMORY, "glTexSubImage2D"); + return; + } + t->base.dirty_images[0] |= (1 << level); + } + _mesa_store_compressed_texsubimage2d(ctx, target, level, xoffset, yoffset, + width, height, format, imageSize, + data, texObj, texImage); + t->dirtySubImages |= (1 << level); + SAVAGE_CONTEXT(ctx)->new_state |= SAVAGE_NEW_TEXTURE; +} + static void savageTexParameter( GLcontext *ctx, GLenum target, struct gl_texture_object *tObj, GLenum pname, const GLfloat *params ) @@ -1945,6 +2100,8 @@ void savageDDInitTextureFuncs( struct dd_function_table *functions ) functions->TexSubImage1D = savageTexSubImage1D; functions->TexImage2D = savageTexImage2D; functions->TexSubImage2D = savageTexSubImage2D; + functions->CompressedTexImage2D = savageCompressedTexImage2D; + functions->CompressedTexSubImage2D = savageCompressedTexSubImage2D; functions->BindTexture = savageBindTexture; functions->NewTextureObject = savageNewTextureObject; functions->DeleteTexture = savageDeleteTexture; |