diff options
Diffstat (limited to 'src/mesa/drivers/dri/common/vblank.c')
-rw-r--r-- | src/mesa/drivers/dri/common/vblank.c | 159 |
1 files changed, 59 insertions, 100 deletions
diff --git a/src/mesa/drivers/dri/common/vblank.c b/src/mesa/drivers/dri/common/vblank.c index 0008ab1c34a..094950d3626 100644 --- a/src/mesa/drivers/dri/common/vblank.c +++ b/src/mesa/drivers/dri/common/vblank.c @@ -34,16 +34,6 @@ #include "vblank.h" #include "xmlpool.h" -static unsigned int msc_to_vblank(__DRIdrawablePrivate * dPriv, int64_t msc) -{ - return (unsigned int)(msc - dPriv->msc_base + dPriv->vblank_base); -} - -static int64_t vblank_to_msc(__DRIdrawablePrivate * dPriv, unsigned int vblank) -{ - return (int64_t)(vblank - dPriv->vblank_base + dPriv->msc_base); -} - /****************************************************************************/ /** @@ -51,7 +41,7 @@ static int64_t vblank_to_msc(__DRIdrawablePrivate * dPriv, unsigned int vblank) * * Stores the 64-bit count of vertical refreshes since some (arbitrary) * point in time in \c count. Unless the value wraps around, which it - * may, it will never decrease for a given drawable. + * may, it will never decrease. * * \warning This function is called from \c glXGetVideoSyncSGI, which expects * a \c count of type \c unsigned (32-bit), and \c glXGetSyncValuesOML, which @@ -59,14 +49,11 @@ static int64_t vblank_to_msc(__DRIdrawablePrivate * dPriv, unsigned int vblank) * currently always returns a \c sequence of type \c unsigned. * * \param priv Pointer to the DRI screen private struct. - * \param dPriv Pointer to the DRI drawable private struct * \param count Storage to hold MSC counter. * \return Zero is returned on success. A negative errno value * is returned on failure. */ -int driDrawableGetMSC32( __DRIscreenPrivate * priv, - __DRIdrawablePrivate * dPriv, - int64_t * count) +int driGetMSC32( __DRIscreenPrivate * priv, int64_t * count ) { drmVBlank vbl; int ret; @@ -75,21 +62,14 @@ int driDrawableGetMSC32( __DRIscreenPrivate * priv, vbl.request.type = DRM_VBLANK_RELATIVE; vbl.request.sequence = 0; - if ( dPriv && dPriv->vblFlags & VBLANK_FLAG_SECONDARY ) - vbl.request.type |= DRM_VBLANK_SECONDARY; ret = drmWaitVBlank( priv->fd, &vbl ); - - if (dPriv) { - *count = vblank_to_msc(dPriv, vbl.reply.sequence); - } else { - /* Old driver (no knowledge of drawable MSC callback) */ - *count = vbl.reply.sequence; - } + *count = (int64_t)vbl.reply.sequence; return ret; } + /****************************************************************************/ /** * Wait for a specified refresh count. This implements most of the @@ -142,9 +122,7 @@ int driWaitForMSC32( __DRIdrawablePrivate *priv, */ vbl.request.type = dont_wait ? DRM_VBLANK_RELATIVE : DRM_VBLANK_ABSOLUTE; - vbl.request.sequence = next ? msc_to_vblank(priv, next) : 0; - if ( priv->vblFlags & VBLANK_FLAG_SECONDARY ) - vbl.request.type |= DRM_VBLANK_SECONDARY; + vbl.request.sequence = next; if ( drmWaitVBlank( priv->driScreenPriv->fd, &vbl ) != 0 ) { /* FIXME: This doesn't seem like the right thing to return here. @@ -152,10 +130,8 @@ int driWaitForMSC32( __DRIdrawablePrivate *priv, return GLX_BAD_CONTEXT; } - *msc = vblank_to_msc(priv, vbl.reply.sequence); - dont_wait = 0; - if (target_msc != 0 && *msc == target) + if (target_msc != 0 && vbl.reply.sequence == target) break; /* Assuming the wait-done test fails, the next refresh to wait for @@ -165,9 +141,9 @@ int driWaitForMSC32( __DRIdrawablePrivate *priv, * If this refresh has already happened, we add divisor to obtain * the next refresh after the current one that will satisfy it. */ - r = (*msc % (unsigned int)divisor); - next = (*msc - r + (unsigned int)remainder); - if (next <= *msc) next += (unsigned int)divisor; + r = (vbl.reply.sequence % (unsigned int)divisor); + next = (vbl.reply.sequence - r + (unsigned int)remainder); + if (next <= vbl.reply.sequence) next += (unsigned int)divisor; } while ( r != (unsigned int)remainder ); } @@ -177,10 +153,7 @@ int driWaitForMSC32( __DRIdrawablePrivate *priv, */ vbl.request.type = DRM_VBLANK_ABSOLUTE; - vbl.request.sequence = target_msc ? msc_to_vblank(priv, target_msc) : 0; - - if ( priv->vblFlags & VBLANK_FLAG_SECONDARY ) - vbl.request.type |= DRM_VBLANK_SECONDARY; + vbl.request.sequence = target_msc; if ( drmWaitVBlank( priv->driScreenPriv->fd, &vbl ) != 0 ) { /* FIXME: This doesn't seem like the right thing to return here. @@ -189,8 +162,8 @@ int driWaitForMSC32( __DRIdrawablePrivate *priv, } } - *msc = vblank_to_msc(priv, vbl.reply.sequence); - + *msc = (target_msc & 0xffffffff00000000LL); + *msc |= vbl.reply.sequence; if ( *msc < target_msc ) { *msc += 0x0000000100000000LL; } @@ -259,8 +232,8 @@ static int do_wait( drmVBlank * vbl, GLuint * vbl_seq, int fd ) if ( first_time ) { fprintf(stderr, "%s: drmWaitVBlank returned %d, IRQs don't seem to be" - " working correctly.\nTry adjusting the vblank_mode" - " configuration parameter.\n", __FUNCTION__, ret); + " working correctly.\nTry running with LIBGL_THROTTLE_REFRESH" + " and LIBL_SYNC_REFRESH unset.\n", __FUNCTION__, ret); first_time = GL_FALSE; } @@ -274,42 +247,20 @@ static int do_wait( drmVBlank * vbl, GLuint * vbl_seq, int fd ) /****************************************************************************/ /** - * Returns the default swap interval of the given drawable. - */ - -static unsigned -driGetDefaultVBlankInterval( const __DRIdrawablePrivate *priv ) -{ - if ( (priv->vblFlags & (VBLANK_FLAG_THROTTLE | VBLANK_FLAG_SYNC)) != 0 ) { - return 1; - } - else { - return 0; - } -} - - -/****************************************************************************/ -/** * Sets the default swap interval when the drawable is first bound to a * direct rendering context. */ -void driDrawableInitVBlank( __DRIdrawablePrivate *priv ) +void driDrawableInitVBlank( __DRIdrawablePrivate *priv, GLuint flags, + GLuint *vbl_seq ) { - if ( priv->swap_interval == (unsigned)-1 && - !( priv->vblFlags & VBLANK_FLAG_NO_IRQ ) ) { + if ( priv->pdraw->swap_interval == (unsigned)-1 ) { /* Get current vertical blank sequence */ - drmVBlank vbl; - - vbl.request.type = DRM_VBLANK_RELATIVE; - if ( priv->vblFlags & VBLANK_FLAG_SECONDARY ) - vbl.request.type |= DRM_VBLANK_SECONDARY; - vbl.request.sequence = 0; - do_wait( &vbl, &priv->vblSeq, priv->driScreenPriv->fd ); - priv->vblank_base = priv->vblSeq; - - priv->swap_interval = driGetDefaultVBlankInterval( priv ); + drmVBlank vbl = { .request={ .type = DRM_VBLANK_RELATIVE, .sequence = 0 } }; + do_wait( &vbl, vbl_seq, priv->driScreenPriv->fd ); + + priv->pdraw->swap_interval = (flags & (VBLANK_FLAG_THROTTLE | + VBLANK_FLAG_SYNC)) != 0 ? 1 : 0; } } @@ -320,17 +271,21 @@ void driDrawableInitVBlank( __DRIdrawablePrivate *priv ) */ unsigned -driGetVBlankInterval( const __DRIdrawablePrivate *priv ) +driGetVBlankInterval( const __DRIdrawablePrivate *priv, GLuint flags ) { - if ( (priv->vblFlags & VBLANK_FLAG_INTERVAL) != 0 ) { + if ( (flags & VBLANK_FLAG_INTERVAL) != 0 ) { /* this must have been initialized when the drawable was first bound * to a direct rendering context. */ - assert ( priv->swap_interval != (unsigned)-1 ); + assert ( priv->pdraw->swap_interval != (unsigned)-1 ); - return priv->swap_interval; + return priv->pdraw->swap_interval; + } + else if ( (flags & (VBLANK_FLAG_THROTTLE | VBLANK_FLAG_SYNC)) != 0 ) { + return 1; + } + else { + return 0; } - else - return driGetDefaultVBlankInterval( priv ); } @@ -340,17 +295,18 @@ driGetVBlankInterval( const __DRIdrawablePrivate *priv ) */ void -driGetCurrentVBlank( __DRIdrawablePrivate *priv ) +driGetCurrentVBlank( const __DRIdrawablePrivate *priv, GLuint flags, + GLuint *vbl_seq ) { drmVBlank vbl; vbl.request.type = DRM_VBLANK_RELATIVE; - if ( priv->vblFlags & VBLANK_FLAG_SECONDARY ) { + if ( flags & VBLANK_FLAG_SECONDARY ) { vbl.request.type |= DRM_VBLANK_SECONDARY; } vbl.request.sequence = 0; - (void) do_wait( &vbl, &priv->vblSeq, priv->driScreenPriv->fd ); + (void) do_wait( &vbl, vbl_seq, priv->driScreenPriv->fd ); } @@ -358,15 +314,19 @@ driGetCurrentVBlank( __DRIdrawablePrivate *priv ) /** * Waits for the vertical blank for use with glXSwapBuffers. * + * \param vbl_seq Vertical blank sequence number (MSC) after the last buffer + * swap. Updated after this wait. + * \param flags \c VBLANK_FLAG bits that control how long to wait. * \param missed_deadline Set to \c GL_TRUE if the MSC after waiting is later - * than the "target" based on \c priv->vblFlags. The idea is - * that if \c missed_deadline is set, then the application is - * not achieving its desired framerate. + * than the "target" based on \c flags. The idea is that if + * \c missed_deadline is set, then the application is not + * achieving its desired framerate. * \return Zero on success, -1 on error. */ int -driWaitForVBlank( __DRIdrawablePrivate *priv, GLboolean * missed_deadline ) +driWaitForVBlank( const __DRIdrawablePrivate *priv, GLuint * vbl_seq, + GLuint flags, GLboolean * missed_deadline ) { drmVBlank vbl; unsigned original_seq; @@ -375,10 +335,10 @@ driWaitForVBlank( __DRIdrawablePrivate *priv, GLboolean * missed_deadline ) unsigned diff; *missed_deadline = GL_FALSE; - if ( (priv->vblFlags & (VBLANK_FLAG_INTERVAL | - VBLANK_FLAG_THROTTLE | - VBLANK_FLAG_SYNC)) == 0 || - (priv->vblFlags & VBLANK_FLAG_NO_IRQ) != 0 ) { + if ( (flags & (VBLANK_FLAG_INTERVAL | + VBLANK_FLAG_THROTTLE | + VBLANK_FLAG_SYNC)) == 0 || + (flags & VBLANK_FLAG_NO_IRQ) != 0 ) { return 0; } @@ -389,45 +349,44 @@ driWaitForVBlank( __DRIdrawablePrivate *priv, GLboolean * missed_deadline ) * * VBLANK_FLAG_INTERVAL and VBLANK_FLAG_THROTTLE mean to wait for at * least one vertical blank since the last wait. Since do_wait modifies - * priv->vblSeq, we have to save the original value of priv->vblSeq for the + * vbl_seq, we have to save the original value of vbl_seq for the * VBLANK_FLAG_INTERVAL / VBLANK_FLAG_THROTTLE calculation later. */ - original_seq = priv->vblSeq; - interval = driGetVBlankInterval(priv); + original_seq = *vbl_seq; + interval = driGetVBlankInterval(priv, flags); deadline = original_seq + interval; vbl.request.type = DRM_VBLANK_RELATIVE; - if ( priv->vblFlags & VBLANK_FLAG_SECONDARY ) { + if ( flags & VBLANK_FLAG_SECONDARY ) { vbl.request.type |= DRM_VBLANK_SECONDARY; } - vbl.request.sequence = ((priv->vblFlags & VBLANK_FLAG_SYNC) != 0) ? 1 : 0; + vbl.request.sequence = ((flags & VBLANK_FLAG_SYNC) != 0) ? 1 : 0; - if ( do_wait( & vbl, &priv->vblSeq, priv->driScreenPriv->fd ) != 0 ) { + if ( do_wait( & vbl, vbl_seq, priv->driScreenPriv->fd ) != 0 ) { return -1; } - diff = priv->vblSeq - deadline; + diff = *vbl_seq - deadline; /* No need to wait again if we've already reached the target */ if (diff <= (1 << 23)) { - *missed_deadline = (priv->vblFlags & VBLANK_FLAG_SYNC) ? (diff > 0) : - GL_TRUE; + *missed_deadline = (flags & VBLANK_FLAG_SYNC) ? (diff > 0) : GL_TRUE; return 0; } /* Wait until the target vertical blank. */ vbl.request.type = DRM_VBLANK_ABSOLUTE; - if ( priv->vblFlags & VBLANK_FLAG_SECONDARY ) { + if ( flags & VBLANK_FLAG_SECONDARY ) { vbl.request.type |= DRM_VBLANK_SECONDARY; } vbl.request.sequence = deadline; - if ( do_wait( & vbl, &priv->vblSeq, priv->driScreenPriv->fd ) != 0 ) { + if ( do_wait( & vbl, vbl_seq, priv->driScreenPriv->fd ) != 0 ) { return -1; } - diff = priv->vblSeq - deadline; + diff = *vbl_seq - deadline; *missed_deadline = diff > 0 && diff <= (1 << 23); return 0; |