diff options
Diffstat (limited to 'src/glu/sgi/libnurbs/internals/splitarcs.cc')
| -rw-r--r-- | src/glu/sgi/libnurbs/internals/splitarcs.cc | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/src/glu/sgi/libnurbs/internals/splitarcs.cc b/src/glu/sgi/libnurbs/internals/splitarcs.cc new file mode 100644 index 00000000000..d28f755af51 --- /dev/null +++ b/src/glu/sgi/libnurbs/internals/splitarcs.cc @@ -0,0 +1,295 @@ +/* +** License Applicability. Except to the extent portions of this file are +** made subject to an alternative license as permitted in the SGI Free +** Software License B, Version 1.1 (the "License"), the contents of this +** file are subject only to the provisions of the License. You may not use +** this file except in compliance with the License. You may obtain a copy +** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 +** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: +** +** http://oss.sgi.com/projects/FreeB +** +** Note that, as provided in the License, the Software is distributed on an +** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +** PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +** +** Original Code. The Original Code is: OpenGL Sample Implementation, +** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, +** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc. +** Copyright in any portions created by third parties is as indicated +** elsewhere herein. All Rights Reserved. +** +** Additional Notice Provisions: The application programming interfaces +** established by SGI in conjunction with the Original Code are The +** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released +** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version +** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X +** Window System(R) (Version 1.3), released October 19, 1998. This software +** was created using the OpenGL(R) version 1.2.1 Sample Implementation +** published by SGI, but has not been independently verified as being +** compliant with the OpenGL(R) version 1.2.1 Specification. +*/ + +/* + * splitarcs.c++ + * + * $Date: 2001/03/17 00:25:41 $ $Revision: 1.1 $ + * $Header: /home/krh/git/sync/mesa-cvs-repo/Mesa/src/glu/sgi/libnurbs/internals/splitarcs.cc,v 1.1 2001/03/17 00:25:41 brianp Exp $ + */ + +#include "glimports.h" +#include "myassert.h" +#include "mysetjmp.h" +#include "mystdio.h" +#include "subdivider.h" +#include "arcsorter.h" +#include "arc.h" +#include "bin.h" + +/* local preprocessor definitions */ +#define MAXARCS 10 + +/*---------------------------------------------------------------------------- + * Subdivider::split - split trim regions in source bin by line (param == value). + *---------------------------------------------------------------------------- + */ + +void +Subdivider::split( Bin& bin, Bin& left, Bin& right, int param, REAL value ) +{ + Bin intersections, unknown; + + partition( bin, left, intersections, right, unknown, param, value ); + + int count = intersections.numarcs(); + if( count % 2 ) { +#ifndef NDEBUG + left.show( "left" ); + intersections.show( "intersections" ); + right.show( "right" ); +#endif + ::mylongjmp( jumpbuffer, 29 ); + } + + Arc_ptr arclist[MAXARCS], *list; + if( count >= MAXARCS ) { + list = new Arc_ptr[count]; + } else { + list = arclist; + } + + Arc_ptr jarc, *last, *lptr; + for( last = list; (jarc=intersections.removearc()) != NULL; last++ ) + *last = jarc; + + if( param == 0 ) { /* sort into increasing t order */ + ArcSdirSorter sorter(*this); + sorter.qsort( list, count ); + + //::qsort ((void *)list, count, sizeof(Arc_ptr), (cmpfunc)compare_s); + for( lptr=list; lptr<last; lptr+=2 ) + check_s ( lptr[0], lptr[1] ); + for( lptr=list; lptr<last; lptr+=2 ) + join_s ( left, right, lptr[0], lptr[1] ); + for( lptr=list; lptr != last; lptr++ ) { + if( ((*lptr)->head()[0] <= value) && ((*lptr)->tail()[0] <= value) ) + left.addarc( *lptr ); + else + right.addarc( *lptr ); + } + } else { /* sort into decreasing s order */ + ArcTdirSorter sorter(*this); + sorter.qsort( list, count ); + //::qsort ((void *)list, count, sizeof(Arc_ptr), (cmpfunc)compare_t); + for( lptr=list; lptr<last; lptr+=2 ) + check_t ( lptr[0], lptr[1] ); + for( lptr=list; lptr<last; lptr+=2 ) + join_t ( left, right, lptr[0], lptr[1] ); + for( lptr=list; lptr != last; lptr++ ) { + if( ((*lptr)->head()[1] <= value) && ((*lptr)->tail()[1] <= value) ) + left.addarc( *lptr ); + else + right.addarc( *lptr ); + } + } + + if( list != arclist ) delete[] list; + unknown.adopt(); +} + + +void +Subdivider::check_s( Arc_ptr jarc1, Arc_ptr jarc2 ) +{ + assert( jarc1->check( ) != 0 ); + assert( jarc2->check( ) != 0 ); + assert( jarc1->next->check( ) != 0 ); + assert( jarc2->next->check( ) != 0 ); + assert( jarc1 != jarc2 ); + + /* XXX - if these assertions fail, it is due to user error or + undersampling */ + if( ! ( jarc1->tail()[0] < (jarc1)->head()[0] ) ) { +#ifndef NDEBUG + dprintf( "s difference %f\n", (jarc1)->tail()[0] - (jarc1)->head()[0] ); +#endif + ::mylongjmp( jumpbuffer, 28 ); + } + + if( ! ( jarc2->tail()[0] > (jarc2)->head()[0] ) ) { +#ifndef NDEBUG + dprintf( "s difference %f\n", (jarc2)->tail()[0] - (jarc2)->head()[0] ); +#endif + ::mylongjmp( jumpbuffer, 28 ); + } +} + +inline void +Subdivider::link( Arc_ptr jarc1, Arc_ptr jarc2, Arc_ptr up, Arc_ptr down ) +{ + up->nuid = down->nuid = 0; // XXX + + up->next = jarc2; + down->next = jarc1; + up->prev = jarc1->prev; + down->prev = jarc2->prev; + + down->next->prev = down; + up->next->prev = up; + down->prev->next = down; + up->prev->next = up; +} + +inline void +Subdivider::simple_link( Arc_ptr jarc1, Arc_ptr jarc2 ) +{ + Arc_ptr tmp = jarc2->prev; + jarc2->prev = jarc1->prev; + jarc1->prev = tmp; + jarc2->prev->next = jarc2; + jarc1->prev->next = jarc1; +} + + +/*---------------------------------------------------------------------------- + * join - add a pair of oppositely directed jordan arcs between two arcs + *---------------------------------------------------------------------------- + */ + +void +Subdivider::join_s( Bin& left, Bin& right, Arc_ptr jarc1, Arc_ptr jarc2 ) +{ + assert( jarc1->check( ) != 0); + assert( jarc2->check( ) != 0); + assert( jarc1 != jarc2 ); + + if( ! jarc1->getitail() ) + jarc1 = jarc1->next; + + if( ! jarc2->getitail() ) + jarc2 = jarc2->next; + + REAL s = jarc1->tail()[0]; + REAL t1 = jarc1->tail()[1]; + REAL t2 = jarc2->tail()[1]; + + if( t1 == t2 ) { + simple_link( jarc1, jarc2 ); + } else { + Arc_ptr newright = new(arcpool) Arc( arc_right, 0 ); + Arc_ptr newleft = new(arcpool) Arc( arc_left, 0 ); + assert( t1 < t2 ); + if( isBezierArcType() ) { + arctessellator.bezier( newright, s, s, t1, t2 ); + arctessellator.bezier( newleft, s, s, t2, t1 ); + } else { + arctessellator.pwl_right( newright, s, t1, t2, stepsizes[0] ); + arctessellator.pwl_left( newleft, s, t2, t1, stepsizes[2] ); + } + link( jarc1, jarc2, newright, newleft ); + left.addarc( newright ); + right.addarc( newleft ); + } + + assert( jarc1->check( ) != 0 ); + assert( jarc2->check( ) != 0 ); + assert( jarc1->next->check( ) != 0); + assert( jarc2->next->check( ) != 0); +} + +void +Subdivider::check_t( Arc_ptr jarc1, Arc_ptr jarc2 ) +{ + assert( jarc1->check( ) != 0 ); + assert( jarc2->check( ) != 0 ); + assert( jarc1->next->check( ) != 0 ); + assert( jarc2->next->check( ) != 0 ); + assert( jarc1 != jarc2 ); + + /* XXX - if these assertions fail, it is due to user error or + undersampling */ + if( ! ( jarc1->tail()[1] < (jarc1)->head()[1] ) ) { +#ifndef NDEBUG + dprintf( "t difference %f\n", jarc1->tail()[1] - (jarc1)->head()[1] ); +#endif + ::mylongjmp( jumpbuffer, 28 ); + } + + if( ! ( jarc2->tail()[1] > (jarc2)->head()[1] ) ) { +#ifndef NDEBUG + dprintf( "t difference %f\n", jarc2->tail()[1] - (jarc2)->head()[1] ); +#endif + ::mylongjmp( jumpbuffer, 28 ); + } +} + +/*---------------------------------------------------------------------------- + * join_t - add a pair of oppositely directed jordan arcs between two arcs + *---------------------------------------------------------------------------- + */ + +void +Subdivider::join_t( Bin& bottom, Bin& top, Arc_ptr jarc1, Arc_ptr jarc2 ) +{ + assert( jarc1->check( ) != 0 ); + assert( jarc2->check( ) != 0 ); + assert( jarc1->next->check( ) != 0 ); + assert( jarc2->next->check( ) != 0 ); + assert( jarc1 != jarc2 ); + + if( ! jarc1->getitail() ) + jarc1 = jarc1->next; + + if( ! jarc2->getitail() ) + jarc2 = jarc2->next; + + REAL s1 = jarc1->tail()[0]; + REAL s2 = jarc2->tail()[0]; + REAL t = jarc1->tail()[1]; + + if( s1 == s2 ) { + simple_link( jarc1, jarc2 ); + } else { + Arc_ptr newtop = new(arcpool) Arc( arc_top, 0 ); + Arc_ptr newbot = new(arcpool) Arc( arc_bottom, 0 ); + assert( s1 > s2 ); + if( isBezierArcType() ) { + arctessellator.bezier( newtop, s1, s2, t, t ); + arctessellator.bezier( newbot, s2, s1, t, t ); + } else { + arctessellator.pwl_top( newtop, t, s1, s2, stepsizes[1] ); + arctessellator.pwl_bottom( newbot, t, s2, s1, stepsizes[3] ); + } + link( jarc1, jarc2, newtop, newbot ); + bottom.addarc( newtop ); + top.addarc( newbot ); + } + + assert( jarc1->check( ) != 0 ); + assert( jarc2->check( ) != 0 ); + assert( jarc1->next->check( ) != 0 ); + assert( jarc2->next->check( ) != 0 ); +} + |