diff options
Diffstat (limited to 'src/glu/sgi/libnurbs/internals/quilt.cc')
-rw-r--r-- | src/glu/sgi/libnurbs/internals/quilt.cc | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/src/glu/sgi/libnurbs/internals/quilt.cc b/src/glu/sgi/libnurbs/internals/quilt.cc new file mode 100644 index 00000000000..b1a9e617a30 --- /dev/null +++ b/src/glu/sgi/libnurbs/internals/quilt.cc @@ -0,0 +1,278 @@ +/* +** License Applicability. Except to the extent portions of this file are +** made subject to an alternative license as permitted in the SGI Free +** Software License B, Version 1.1 (the "License"), the contents of this +** file are subject only to the provisions of the License. You may not use +** this file except in compliance with the License. You may obtain a copy +** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 +** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: +** +** http://oss.sgi.com/projects/FreeB +** +** Note that, as provided in the License, the Software is distributed on an +** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +** PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +** +** Original Code. The Original Code is: OpenGL Sample Implementation, +** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, +** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc. +** Copyright in any portions created by third parties is as indicated +** elsewhere herein. All Rights Reserved. +** +** Additional Notice Provisions: The application programming interfaces +** established by SGI in conjunction with the Original Code are The +** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released +** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version +** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X +** Window System(R) (Version 1.3), released October 19, 1998. This software +** was created using the OpenGL(R) version 1.2.1 Sample Implementation +** published by SGI, but has not been independently verified as being +** compliant with the OpenGL(R) version 1.2.1 Specification. +*/ + +/* + * quilt.c++ + * + * $Date: 2001/03/17 00:25:41 $ $Revision: 1.1 $ + * $Header: /home/krh/git/sync/mesa-cvs-repo/Mesa/src/glu/sgi/libnurbs/internals/quilt.cc,v 1.1 2001/03/17 00:25:41 brianp Exp $ + */ + +#include "glimports.h" +#include "mystdio.h" +#include "myassert.h" +#include "quilt.h" +#include "backend.h" +#include "mapdesc.h" +#include "flist.h" +#include "knotvector.h" +#include "patchlist.h" +#include "math.h" //fabs() +#include "simplemath.h" //min() + +/* local preprocessor definitions */ +#define DEF_PATCH_STEPSIZE .4 +#define fsizeof(x) (sizeof(x)/sizeof(REAL)) + + +Quilt::Quilt( Mapdesc *_mapdesc ) +{ + mapdesc = _mapdesc; +} + +void +Quilt::deleteMe( Pool& p ) +{ + for( Quiltspec *q=qspec; q != eqspec; q++ ) { +#if 1 + if( q->breakpoints) delete[] q->breakpoints; q->breakpoints = 0; +#else + if( q->breakpoints) { + delete[] q->breakpoints; + q->breakpoints = 0; +printf("in here\n"); + } +#endif + } + if( cpts ) delete[] cpts; + cpts = 0; + PooledObj::deleteMe( p ); +} + +void +Quilt::show( void ) +{ +#ifndef NDEBUG + int nc = mapdesc->getNcoords(); + REAL *ps = cpts; + ps += qspec[0].offset; + ps += qspec[1].offset; + for( int i=0; i!= qspec[0].order * qspec[0].width; i++ ) { + for( int j = 0; j!= qspec[1].order * qspec[1].width; j++ ) { + for( int k=0; k < nc; k++ ) + dprintf( "%g ", ps[i*qspec[0].stride + j*qspec[1].stride + k] ); + dprintf( "\n" ); + } + dprintf( "\n" ); + } + dprintf( "\n" ); +#endif +} + +/*-------------------------------------------------------------------------- + * Quilt::select - find which map in each quilt contains the points + * pta and ptb with pta[i] < ptb[i] + *-------------------------------------------------------------------------- + */ + +void +Quilt::select( REAL *pta, REAL *ptb ) +{ + int dim = eqspec - qspec; + int i, j; + for( i=0; i<dim; i++) { + for( j=qspec[i].width-1; j>=0; j-- ) + if( (qspec[i].breakpoints[j] <= pta[i] ) && + (ptb[i] <= qspec[i].breakpoints[j+1] ) ) + break; + assert( j != -1 ); + qspec[i].index = j; + } +} + +void +Quilt::download( Backend &backend ) +{ + if( getDimension() == 2 ) { + REAL *ps = cpts; + ps += qspec[0].offset; + ps += qspec[1].offset; + ps += qspec[0].index * qspec[0].order * qspec[0].stride; + ps += qspec[1].index * qspec[1].order * qspec[1].stride; + backend.surfpts( mapdesc->getType(), ps, + qspec[0].stride, + qspec[1].stride, + qspec[0].order, + qspec[1].order, + qspec[0].breakpoints[qspec[0].index], + qspec[0].breakpoints[qspec[0].index+1], + qspec[1].breakpoints[qspec[1].index], + qspec[1].breakpoints[qspec[1].index+1] ); + } else { + REAL *ps = cpts; + ps += qspec[0].offset; + ps += qspec[0].index * qspec[0].order * qspec[0].stride; + backend.curvpts( mapdesc->getType(), ps, + qspec[0].stride, + qspec[0].order, + qspec[0].breakpoints[qspec[0].index], + qspec[0].breakpoints[qspec[0].index+1] ); + } +} + +/*-------------------------------------------------------------------------- + * Quilt::downloadAll - download each map that contains the current patch + *-------------------------------------------------------------------------- + */ + +void +Quilt::downloadAll( REAL *pta, REAL *ptb, Backend &backend ) +{ + for( Quilt *m = this; m; m=m->next ) { + m->select( pta, ptb ); + m->download( backend ); + } +} + +/*-------------------------------------------------------------------------- + * Quilt::isCulled - determine if an entire quilt is trivially rejected. + *-------------------------------------------------------------------------- + */ + +int +Quilt::isCulled( void ) +{ + if( mapdesc->isCulling() ) + return mapdesc->xformAndCullCheck( cpts + qspec[0].offset + qspec[1].offset, + qspec[0].order * qspec[0].width, qspec[0].stride, + qspec[1].order * qspec[1].width, qspec[1].stride ); + else + return CULL_ACCEPT; +} + +/*--------------------------------------------------------------------------- + * Quilt::getRange - retrieve the valid paramater range of a set of quilts + *--------------------------------------------------------------------------- + */ +void +Quilt::getRange( REAL *from, REAL *to, Flist& slist, Flist &tlist ) +{ + getRange( from, to, 0, slist ); + getRange( from, to, 1, tlist ); +} + +/*--------------------------------------------------------------------------- + * Quilt::getRange - retrieve the valid paramater range of a set of quilts + *--------------------------------------------------------------------------- + */ +void +Quilt::getRange( REAL *from, REAL *to, int i, Flist &list ) +{ + Quilt *maps = this; + from[i] = maps->qspec[i].breakpoints[0]; + to[i] = maps->qspec[i].breakpoints[maps->qspec[i].width]; + int maxpts = 0; + Quilt_ptr m; + for( m=maps; m; m=m->next ) { + if( m->qspec[i].breakpoints[0] > from[i] ) + from[i] = m->qspec[i].breakpoints[0]; + if( m->qspec[i].breakpoints[m->qspec[i].width] < to[i] ) + to[i] = m->qspec[i].breakpoints[m->qspec[i].width]; + maxpts += m->qspec[i].width + 1; + } + + list.grow( maxpts ); + + for( m=maps; m; m=m->next ) + for( int j=0; j<=m->qspec[i].width; j++ ) { + list.add( m->qspec[i].breakpoints[j] ); + } + + list.filter( ); + list.taper( from[i], to[i] ); +} + +void +Quilt::getRange( REAL *from, REAL *to, Flist& slist ) +{ + getRange( from, to, 0, slist ); +} + +void +Quilt::findRates( Flist& slist, Flist& tlist, REAL rate[2] ) +{ + findSampleRates( slist, tlist ); + rate[0] = qspec[0].step_size; + rate[1] = qspec[1].step_size; + + for( Quilt *q = next; q; q = q->next ) { + q->findSampleRates( slist, tlist ); + if( q->qspec[0].step_size < rate[0] ) + rate[0] = q->qspec[0].step_size; + if( q->qspec[1].step_size < rate[1] ) + rate[1] = q->qspec[1].step_size; + } +} + +void +Quilt::findSampleRates( Flist& slist, Flist& tlist ) +{ + qspec[0].step_size = DEF_PATCH_STEPSIZE * + (qspec[0].breakpoints[qspec[0].width] - qspec[0].breakpoints[0]); + qspec[1].step_size = DEF_PATCH_STEPSIZE * + (qspec[1].breakpoints[qspec[1].width] - qspec[1].breakpoints[0]); + + for( int i = slist.start; i < slist.end-1; i++ ) { + for( int j = tlist.start; j < tlist.end-1; j++ ) { + + REAL pta[2], ptb[2]; + pta[0] = slist.pts[i]; + ptb[0] = slist.pts[i+1]; + pta[1] = tlist.pts[j]; + ptb[1] = tlist.pts[j+1]; + Patchlist patchlist( this, pta, ptb ); + patchlist.getstepsize(); + + { + float edge_len_s = min(fabs(ptb[0]-pta[0]),1.0); + float edge_len_t = min(fabs(ptb[1]-pta[1]),1.0); + + if( patchlist.getStepsize(0)/edge_len_s < qspec[0].step_size ) + qspec[0].step_size = patchlist.getStepsize(0)/edge_len_s; + if( patchlist.getStepsize(1)/edge_len_t < qspec[1].step_size ) + qspec[1].step_size = patchlist.getStepsize(1)/edge_len_t; + } + } + } +} |