summaryrefslogtreecommitdiffstats
path: root/src/gallium
diff options
context:
space:
mode:
Diffstat (limited to 'src/gallium')
-rw-r--r--src/gallium/drivers/swr/rasterizer/core/binner.cpp14
-rw-r--r--src/gallium/drivers/swr/rasterizer/core/rasterizer.cpp28
-rw-r--r--src/gallium/drivers/swr/rasterizer/core/rasterizer.h10
3 files changed, 26 insertions, 26 deletions
diff --git a/src/gallium/drivers/swr/rasterizer/core/binner.cpp b/src/gallium/drivers/swr/rasterizer/core/binner.cpp
index 63eab33ac0b..3d42718a374 100644
--- a/src/gallium/drivers/swr/rasterizer/core/binner.cpp
+++ b/src/gallium/drivers/swr/rasterizer/core/binner.cpp
@@ -599,9 +599,6 @@ void BinTriangles(
uint32_t *pPrimID = (uint32_t *)&primID;
const uint32_t *pViewportIndex = (uint32_t *)&viewportIdx;
DWORD triIndex = 0;
- // for center sample pattern, all samples are at pixel center; calculate coverage
- // once at center and broadcast the results in the backend
- const SWR_MULTISAMPLE_COUNT sampleCount = (rastState.samplePattern == SWR_MSAA_STANDARD_PATTERN) ? rastState.sampleCount : SWR_MULTISAMPLE_1X;
uint32_t edgeEnable;
PFN_WORK_FUNC pfnWork;
if (CT::IsConservativeT::value)
@@ -643,8 +640,8 @@ void BinTriangles(
else
{
// degenerate triangles won't be sent to rasterizer; just enable all edges
- pfnWork = GetRasterizerFunc(sampleCount, (rastState.conservativeRast > 0),
- (SWR_INPUT_COVERAGE)pDC->pState->state.psState.inputCoverage, ALL_EDGES_VALID,
+ pfnWork = GetRasterizerFunc(rastState.sampleCount, (rastState.samplePattern == SWR_MSAA_CENTER_PATTERN),
+ (rastState.conservativeRast > 0), (SWR_INPUT_COVERAGE)pDC->pState->state.psState.inputCoverage, ALL_EDGES_VALID,
(state.scissorsTileAligned == false));
}
@@ -661,7 +658,8 @@ void BinTriangles(
// only discard for non-MSAA case and when conservative rast is disabled
// (xmin + 127) & ~255
// (xmax + 128) & ~255
- if (rastState.sampleCount == SWR_MULTISAMPLE_1X && (!CT::IsConservativeT::value))
+ if((rastState.sampleCount == SWR_MULTISAMPLE_1X || rastState.samplePattern == SWR_MSAA_CENTER_PATTERN) &&
+ (!CT::IsConservativeT::value))
{
origTriMask = triMask;
@@ -789,8 +787,8 @@ endBinTriangles:
{
// only rasterize valid edges if we have a degenerate primitive
int32_t triEdgeEnable = (edgeEnable >> (triIndex * 3)) & ALL_EDGES_VALID;
- work.pfnWork = GetRasterizerFunc(sampleCount, (rastState.conservativeRast > 0),
- (SWR_INPUT_COVERAGE)pDC->pState->state.psState.inputCoverage, triEdgeEnable,
+ work.pfnWork = GetRasterizerFunc(rastState.sampleCount, (rastState.samplePattern == SWR_MSAA_CENTER_PATTERN),
+ (rastState.conservativeRast > 0), (SWR_INPUT_COVERAGE)pDC->pState->state.psState.inputCoverage, triEdgeEnable,
(state.scissorsTileAligned == false));
// Degenerate triangles are required to be constant interpolated
diff --git a/src/gallium/drivers/swr/rasterizer/core/rasterizer.cpp b/src/gallium/drivers/swr/rasterizer/core/rasterizer.cpp
index a8a052a73c3..d0fdf4882ff 100644
--- a/src/gallium/drivers/swr/rasterizer/core/rasterizer.cpp
+++ b/src/gallium/drivers/swr/rasterizer/core/rasterizer.cpp
@@ -814,7 +814,7 @@ struct UpdateEdgeMasksInnerConservative<RT, AllEdgesValidT, InnerConservativeCov
adjustEdgeConservative<RT, typename RT::InnerConservativeEdgeOffsetT>(vAi, vBi, vTempEdge[1]);
adjustEdgeConservative<RT, typename RT::InnerConservativeEdgeOffsetT>(vAi, vBi, vTempEdge[2]);
- UpdateEdgeMasks<typename RT::NumRasterSamplesT>(vEdgeTileBbox, vTempEdge, mask0, mask1, mask2);
+ UpdateEdgeMasks<typename RT::NumCoverageSamplesT>(vEdgeTileBbox, vTempEdge, mask0, mask1, mask2);
}
};
@@ -1037,11 +1037,11 @@ void RasterizeTriangle(DRAW_CONTEXT* pDC, uint32_t workerId, uint32_t macroTile,
int32_t y = AlignDown(intersect.ymin, (FIXED_POINT_SCALE * KNOB_TILE_Y_DIM));
// convenience typedef
- typedef typename RT::NumRasterSamplesT NumRasterSamplesT;
+ typedef typename RT::NumCoverageSamplesT NumCoverageSamplesT;
// single sample rasterization evaluates edges at pixel center,
// multisample evaluates edges UL pixel corner and steps to each sample position
- if(std::is_same<NumRasterSamplesT, SingleSampleT>::value)
+ if(std::is_same<NumCoverageSamplesT, SingleSampleT>::value)
{
// Add 0.5, in fixed point, to offset to pixel center
x += (FIXED_POINT_SCALE / 2);
@@ -1116,7 +1116,7 @@ void RasterizeTriangle(DRAW_CONTEXT* pDC, uint32_t workerId, uint32_t macroTile,
// | |
// min(xSamples),max(ySamples) ------ max(xSamples),max(ySamples)
__m256d vEdgeTileBbox[3];
- if (NumRasterSamplesT::value > 1)
+ if (NumCoverageSamplesT::value > 1)
{
__m128i vTileSampleBBoxXh = RT::MT::TileSampleOffsetsX();
__m128i vTileSampleBBoxYh = RT::MT::TileSampleOffsetsY();
@@ -1163,9 +1163,9 @@ void RasterizeTriangle(DRAW_CONTEXT* pDC, uint32_t workerId, uint32_t macroTile,
// is the corner of the edge outside of the raster tile? (vEdge < 0)
int mask0, mask1, mask2;
- UpdateEdgeMasks<NumRasterSamplesT>(vEdgeTileBbox, vEdgeFix16, mask0, mask1, mask2);
+ UpdateEdgeMasks<NumCoverageSamplesT>(vEdgeTileBbox, vEdgeFix16, mask0, mask1, mask2);
- for (uint32_t sampleNum = 0; sampleNum < NumRasterSamplesT::value; sampleNum++)
+ for (uint32_t sampleNum = 0; sampleNum < NumCoverageSamplesT::value; sampleNum++)
{
// trivial reject, at least one edge has all 4 corners of raster tile outside
bool trivialReject = TrivialRejectTest<typename RT::ValidEdgeMaskT>(mask0, mask1, mask2);
@@ -1196,7 +1196,7 @@ void RasterizeTriangle(DRAW_CONTEXT* pDC, uint32_t workerId, uint32_t macroTile,
else
{
__m256d vEdgeAtSample[RT::NumEdgesT::value];
- if(std::is_same<NumRasterSamplesT, SingleSampleT>::value)
+ if(std::is_same<NumCoverageSamplesT, SingleSampleT>::value)
{
// should get optimized out for single sample case (global value numbering or copy propagation)
for (uint32_t e = 0; e < RT::NumEdgesT::value; ++e)
@@ -1242,7 +1242,7 @@ void RasterizeTriangle(DRAW_CONTEXT* pDC, uint32_t workerId, uint32_t macroTile,
else
{
// if we're calculating coverage per sample, need to store it off. otherwise no covered samples, don't need to do anything
- if(NumRasterSamplesT::value > 1)
+ if(NumCoverageSamplesT::value > 1)
{
triDesc.coverageMask[sampleNum] = 0;
}
@@ -1339,11 +1339,9 @@ void RasterizeTriPoint(DRAW_CONTEXT *pDC, uint32_t workerId, uint32_t macroTile,
// setup triangle rasterizer function
PFN_WORK_FUNC pfnTriRast;
- // for center sample pattern, all samples are at pixel center; calculate coverage
- // once at center and broadcast the results in the backend
- uint32_t sampleCount = (rastState.samplePattern == SWR_MSAA_STANDARD_PATTERN) ? rastState.sampleCount : SWR_MULTISAMPLE_1X;
// conservative rast not supported for points/lines
- pfnTriRast = GetRasterizerFunc(sampleCount, false, SWR_INPUT_COVERAGE_NONE, ALL_EDGES_VALID, (pDC->pState->state.scissorsTileAligned == false));
+ pfnTriRast = GetRasterizerFunc(rastState.sampleCount, (rastState.samplePattern == SWR_MSAA_CENTER_PATTERN), false,
+ SWR_INPUT_COVERAGE_NONE, ALL_EDGES_VALID, (pDC->pState->state.scissorsTileAligned == false));
// overwrite texcoords for point sprites
if (isPointSpriteTexCoordEnabled)
@@ -1674,9 +1672,9 @@ void RasterizeLine(DRAW_CONTEXT *pDC, uint32_t workerId, uint32_t macroTile, voi
// setup triangle rasterizer function
PFN_WORK_FUNC pfnTriRast;
- uint32_t sampleCount = (rastState.samplePattern == SWR_MSAA_STANDARD_PATTERN) ? rastState.sampleCount : SWR_MULTISAMPLE_1X;
// conservative rast not supported for points/lines
- pfnTriRast = GetRasterizerFunc(sampleCount, false, SWR_INPUT_COVERAGE_NONE, ALL_EDGES_VALID, (pDC->pState->state.scissorsTileAligned == false));
+ pfnTriRast = GetRasterizerFunc(rastState.sampleCount, (rastState.samplePattern == SWR_MSAA_CENTER_PATTERN), false,
+ SWR_INPUT_COVERAGE_NONE, ALL_EDGES_VALID, (pDC->pState->state.scissorsTileAligned == false));
// make sure this macrotile intersects the triangle
__m128i vXai = fpToFixedPoint(vXa);
@@ -1786,6 +1784,7 @@ struct RasterizerChooser
// Selector for correct templated RasterizeTriangle function
PFN_WORK_FUNC GetRasterizerFunc(
uint32_t numSamples,
+ bool IsCenter,
bool IsConservative,
uint32_t InputCoverage,
uint32_t EdgeEnable,
@@ -1794,6 +1793,7 @@ PFN_WORK_FUNC GetRasterizerFunc(
{
return TemplateArgUnroller<RasterizerChooser>::GetFunc(
IntArg<SWR_MULTISAMPLE_1X,SWR_MULTISAMPLE_TYPE_COUNT-1>{numSamples},
+ IsCenter,
IsConservative,
IntArg<SWR_INPUT_COVERAGE_NONE, SWR_INPUT_COVERAGE_COUNT-1>{InputCoverage},
IntArg<0, VALID_TRI_EDGE_COUNT-1>{EdgeEnable},
diff --git a/src/gallium/drivers/swr/rasterizer/core/rasterizer.h b/src/gallium/drivers/swr/rasterizer/core/rasterizer.h
index 457153b7fbd..96b12ae4196 100644
--- a/src/gallium/drivers/swr/rasterizer/core/rasterizer.h
+++ b/src/gallium/drivers/swr/rasterizer/core/rasterizer.h
@@ -46,6 +46,7 @@ __m128i fpToFixedPoint(const __m128 vIn)
// Selector for correct templated RasterizeTriangle function
PFN_WORK_FUNC GetRasterizerFunc(
uint32_t numSamples,
+ bool IsCenter,
bool IsConservative,
uint32_t InputCoverage,
uint32_t EdgeEnable,
@@ -110,19 +111,20 @@ struct RasterEdgeTraits<std::false_type, std::false_type, EdgeMaskT>
/// @tparam InputCoverageT: what type of input coverage is the PS expecting?
/// (only used with conservative rasterization)
/// @tparam RasterScissorEdgesT: do we need to rasterize with a scissor?
-template <typename NumSamplesT, typename ConservativeT, typename InputCoverageT, typename EdgeEnableT, typename RasterScissorEdgesT>
+template <typename NumSamplesT, typename CenterPatternT, typename ConservativeT, typename InputCoverageT, typename EdgeEnableT, typename RasterScissorEdgesT>
struct RasterizerTraits final : public ConservativeRastBETraits<ConservativeT, InputCoverageT>,
public RasterEdgeTraits<RasterScissorEdgesT, ConservativeT, std::integral_constant<uint32_t, EdgeEnableT::value>>
{
- typedef MultisampleTraits<static_cast<SWR_MULTISAMPLE_COUNT>(NumSamplesT::value)> MT;
+ typedef MultisampleTraits<static_cast<SWR_MULTISAMPLE_COUNT>(NumSamplesT::value),
+ (CenterPatternT::value ? SWR_MSAA_CENTER_PATTERN : SWR_MSAA_STANDARD_PATTERN)> MT;
/// Fixed point precision the rasterizer is using
typedef FixedPointTraits<Fixed_16_8> PrecisionT;
/// Fixed point precision of the edge tests used during rasterization
typedef FixedPointTraits<Fixed_X_16> EdgePrecisionT;
- // If conservative rast is enabled, only need a single sample coverage test, with the result copied to all samples
- typedef std::integral_constant<int, (ConservativeT::value) ? 1 : MT::numSamples> NumRasterSamplesT;
+ // If conservative rast or MSAA center pattern is enabled, only need a single sample coverage test, with the result copied to all samples
+ typedef std::integral_constant<int, ConservativeT::value ? 1 : MT::numCoverageSamples> NumCoverageSamplesT;
static_assert(EdgePrecisionT::BitsT::value >= ConservativeRastBETraits<ConservativeT, InputCoverageT>::ConservativePrecisionT::BitsT::value,
"Rasterizer edge fixed point precision < required conservative rast precision");
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 18:50:48 +0000