summaryrefslogtreecommitdiffstats
path: root/src/gallium
diff options
context:
space:
mode:
Diffstat (limited to 'src/gallium')
-rw-r--r--src/gallium/drivers/r300/r300_context.h11
-rw-r--r--src/gallium/drivers/r300/r300_state_derived.c173
2 files changed, 108 insertions, 76 deletions
diff --git a/src/gallium/drivers/r300/r300_context.h b/src/gallium/drivers/r300/r300_context.h
index fec2bad5461..4c695c1195a 100644
--- a/src/gallium/drivers/r300/r300_context.h
+++ b/src/gallium/drivers/r300/r300_context.h
@@ -60,7 +60,7 @@ struct r300_dsa_state {
};
struct r300_rs_state {
- /* XXX icky as fucking hell */
+ /* Draw-specific rasterizer state */
struct pipe_rasterizer_state rs;
uint32_t vap_control_status; /* R300_VAP_CNTL_STATUS: 0x2140 */
@@ -225,10 +225,11 @@ struct r300_vertex_format {
uint32_t vap_prog_stream_cntl[8];
/* R300_VAP_PROG_STREAK_CNTL_EXT_[0-7] */
uint32_t vap_prog_stream_cntl_ext[8];
- /* This is a map of VAP/SW TCL outputs into the GA/RS.
- * tab[i] is the location of input i in GA/RS input memory.
- * Named tab for historical reasons. */
- int tab[16];
+ /* Map of vertex attributes into PVS memory for HW TCL,
+ * or GA memory for SW TCL. */
+ int vs_tab[16];
+ /* Map of rasterizer attributes from GB through RS to US. */
+ int fs_tab[16];
};
struct r300_vertex_shader {
diff --git a/src/gallium/drivers/r300/r300_state_derived.c b/src/gallium/drivers/r300/r300_state_derived.c
index f1feafbcf91..a777771930b 100644
--- a/src/gallium/drivers/r300/r300_state_derived.c
+++ b/src/gallium/drivers/r300/r300_state_derived.c
@@ -25,37 +25,35 @@
/* r300_state_derived: Various bits of state which are dependent upon
* currently bound CSO data. */
-/* Update the vertex_info struct in our r300_context.
- *
- * The vertex_info struct describes the post-TCL format of vertices. It is
- * required for Draw when doing SW TCL, and also for describing the
- * dreaded RS block on R300 chipsets. */
-static void r300_update_vertex_layout(struct r300_context* r300)
+/* Set up the vs_tab and routes. */
+static void r300_vs_tab_routes(struct r300_context* r300,
+ struct r300_vertex_format* vformat)
{
struct r300_screen* r300screen = r300_screen(r300->context.screen);
- struct r300_vertex_format vformat;
- struct vertex_info vinfo;
+ struct vertex_info* vinfo = &vformat->vinfo;
+ int* tab = vformat->vs_tab;
boolean pos = FALSE, psize = FALSE, fog = FALSE;
int i, texs = 0, cols = 0;
- int tab[16];
-
- struct tgsi_shader_info* info = &r300->fs->info;
+ struct tgsi_shader_info* info;
- memset(&vinfo, 0, sizeof(vinfo));
- for (i = 0; i < 16; i++) {
- tab[i] = -1;
+ if (r300screen->caps->has_tcl) {
+ /* Use vertex shader to determine required routes. */
+ info = &r300->vs->info;
+ } else {
+ /* Use fragment shader to determine required routes. */
+ info = &r300->fs->info;
}
assert(info->num_inputs <= 16);
-
for (i = 0; i < info->num_inputs; i++) {
- switch (info->input_semantic_name[i]) {
+ switch (info->output_semantic_name[i]) {
case TGSI_SEMANTIC_POSITION:
pos = TRUE;
tab[i] = 0;
break;
case TGSI_SEMANTIC_COLOR:
- tab[i] = 2 + cols++;
+ tab[i] = 2 + cols;
+ cols++;
break;
case TGSI_SEMANTIC_PSIZE:
psize = TRUE;
@@ -63,9 +61,10 @@ static void r300_update_vertex_layout(struct r300_context* r300)
break;
case TGSI_SEMANTIC_FOG:
fog = TRUE;
- /* Fall through... */
+ /* Fall through */
case TGSI_SEMANTIC_GENERIC:
- tab[i] = 6 + texs++;
+ tab[i] = 6 + texs;
+ texs++;
break;
default:
debug_printf("r300: Unknown vertex input %d\n",
@@ -75,8 +74,8 @@ static void r300_update_vertex_layout(struct r300_context* r300)
}
if (r300screen->caps->has_tcl) {
+ /* Just copy vert attribs over as-is. */
for (i = 0; i < info->num_inputs; i++) {
- /* XXX should probably do real lookup with vert shader */
tab[i] = i;
}
}
@@ -89,7 +88,7 @@ static void r300_update_vertex_layout(struct r300_context* r300)
* vinfo.hwfmt[2] is R300_VAP_OUTPUT_VTX_FMT_0
* vinfo.hwfmt[3] is R300_VAP_OUTPUT_VTX_FMT_1 */
- vinfo.hwfmt[0] = 0x5555; /* XXX this is classic Mesa bonghits */
+ vinfo->hwfmt[0] = 0x5555; /* XXX this is classic Mesa bonghits */
if (!pos) {
debug_printf("r300: Forcing vertex position attribute emit...\n");
@@ -100,80 +99,112 @@ static void r300_update_vertex_layout(struct r300_context* r300)
}
tab[0] = 0;
- draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_POS,
+ draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_POS,
draw_find_vs_output(r300->draw, TGSI_SEMANTIC_POSITION, 0));
} else {
- draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_PERSPECTIVE,
+ draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_PERSPECTIVE,
draw_find_vs_output(r300->draw, TGSI_SEMANTIC_POSITION, 0));
}
- vinfo.hwfmt[1] |= R300_INPUT_CNTL_POS;
- vinfo.hwfmt[2] |= R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT;
+ vinfo->hwfmt[1] |= R300_INPUT_CNTL_POS;
+ vinfo->hwfmt[2] |= R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT;
if (psize) {
- draw_emit_vertex_attr(&vinfo, EMIT_1F_PSIZE, INTERP_POS,
+ draw_emit_vertex_attr(vinfo, EMIT_1F_PSIZE, INTERP_POS,
draw_find_vs_output(r300->draw, TGSI_SEMANTIC_PSIZE, 0));
- vinfo.hwfmt[2] |= R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT;
+ vinfo->hwfmt[2] |= R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT;
}
for (i = 0; i < cols; i++) {
- draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_LINEAR,
+ draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_LINEAR,
draw_find_vs_output(r300->draw, TGSI_SEMANTIC_COLOR, i));
- vinfo.hwfmt[1] |= R300_INPUT_CNTL_COLOR;
- vinfo.hwfmt[2] |= (R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT << i);
+ vinfo->hwfmt[1] |= R300_INPUT_CNTL_COLOR;
+ vinfo->hwfmt[2] |= (R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT << i);
}
for (i = 0; i < texs; i++) {
- draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_PERSPECTIVE,
+ draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_PERSPECTIVE,
draw_find_vs_output(r300->draw, TGSI_SEMANTIC_GENERIC, i));
- vinfo.hwfmt[1] |= (R300_INPUT_CNTL_TC0 << i);
- vinfo.hwfmt[3] |= (4 << (3 * i));
+ vinfo->hwfmt[1] |= (R300_INPUT_CNTL_TC0 << i);
+ vinfo->hwfmt[3] |= (4 << (3 * i));
}
if (fog) {
i++;
- draw_emit_vertex_attr(&vinfo, EMIT_4F, INTERP_PERSPECTIVE,
+ draw_emit_vertex_attr(vinfo, EMIT_4F, INTERP_PERSPECTIVE,
draw_find_vs_output(r300->draw, TGSI_SEMANTIC_FOG, 0));
- vinfo.hwfmt[1] |= (R300_INPUT_CNTL_TC0 << i);
- vinfo.hwfmt[3] |= (4 << (3 * i));
+ vinfo->hwfmt[1] |= (R300_INPUT_CNTL_TC0 << i);
+ vinfo->hwfmt[3] |= (4 << (3 * i));
}
- draw_compute_vertex_size(&vinfo);
-
- if (memcmp(&r300->vertex_info, &vinfo, sizeof(struct vertex_info))) {
- uint32_t temp;
- debug_printf("attrib count: %d, fp input count: %d\n",
- vinfo.num_attribs, info->num_inputs);
- for (i = 0; i < vinfo.num_attribs; i++) {
- debug_printf("attrib: offset %d, interp %d, size %d,"
- " tab %d\n", vinfo.attrib[i].src_index,
- vinfo.attrib[i].interp_mode, vinfo.attrib[i].emit,
- tab[i]);
- }
+ draw_compute_vertex_size(vinfo);
+}
- for (i = 0; i < vinfo.num_attribs; i++) {
- /* Make sure we have a proper destination for our attribute */
- assert(tab[i] != -1);
-
- temp = translate_vertex_data_type(vinfo.attrib[i].emit) |
- (tab[i] << R300_DST_VEC_LOC_SHIFT);
- if (i & 1) {
- r300->vertex_info.vap_prog_stream_cntl[i >> 1] &= 0x0000ffff;
- r300->vertex_info.vap_prog_stream_cntl[i >> 1] |= temp << 16;
- } else {
- r300->vertex_info.vap_prog_stream_cntl[i >> 1] &= 0xffff0000;
- r300->vertex_info.vap_prog_stream_cntl[i >> 1] |= temp;
- }
+/* Update the PSC tables. */
+static void r300_vertex_psc(struct r300_context* r300,
+ struct r300_vertex_format* vformat)
+{
+ struct vertex_info* vinfo = &vformat->vinfo;
+ int* tab = vformat->vs_tab;
+ uint32_t temp;
+ int i;
+
+ debug_printf("r300: attrib count: %d\n", vinfo->num_attribs);
+ for (i = 0; i < vinfo->num_attribs; i++) {
+ debug_printf("r300: attrib: offset %d, interp %d, size %d,"
+ " tab %d\n", vinfo->attrib[i].src_index,
+ vinfo->attrib[i].interp_mode, vinfo->attrib[i].emit,
+ tab[i]);
+ }
- r300->vertex_info.vap_prog_stream_cntl_ext[i >> 1] |=
- (R300_VAP_SWIZZLE_XYZW << (i & 1 ? 16 : 0));
+ for (i = 0; i < vinfo->num_attribs; i++) {
+ /* Make sure we have a proper destination for our attribute */
+ assert(tab[i] != -1);
+
+ /* Add the attribute to the PSC table. */
+ temp = translate_vertex_data_type(vinfo->attrib[i].emit) |
+ (tab[i] << R300_DST_VEC_LOC_SHIFT);
+ if (i & 1) {
+ vformat->vap_prog_stream_cntl[i >> 1] &= 0x0000ffff;
+ vformat->vap_prog_stream_cntl[i >> 1] |= temp << 16;
+
+ vformat->vap_prog_stream_cntl_ext[i >> 1] |=
+ (R300_VAP_SWIZZLE_XYZW << 16);
+ } else {
+ vformat->vap_prog_stream_cntl[i >> 1] &= 0xffff0000;
+ vformat->vap_prog_stream_cntl[i >> 1] |= temp << 0;
+
+ vformat->vap_prog_stream_cntl_ext[i >> 1] |=
+ (R300_VAP_SWIZZLE_XYZW << 0);
}
- /* Set the last vector. */
- i--;
- r300->vertex_info.vap_prog_stream_cntl[i >> 1] |= (R300_LAST_VEC <<
- (i & 1 ? 16 : 0));
+ }
+
+ /* Set the last vector in the PSC. */
+ i--;
+ vformat->vap_prog_stream_cntl[i >> 1] |=
+ (R300_LAST_VEC << (i & 1 ? 16 : 0));
+}
+
+/* Update the vertex format. */
+static void r300_update_vertex_format(struct r300_context* r300)
+{
+ struct r300_screen* r300screen = r300_screen(r300->context.screen);
+ struct r300_vertex_format vformat;
+ int i;
+
+ memset(&vformat, 0, sizeof(struct r300_vertex_format));
+ for (i = 0; i < 16; i++) {
+ vformat.vs_tab[i] = -1;
+ vformat.fs_tab[i] = -1;
+ }
+
+ r300_vs_tab_routes(r300, &vformat);
+
+ r300_vertex_psc(r300, &vformat);
- memcpy(r300->vertex_info.tab, tab, sizeof(tab));
- memcpy(&r300->vertex_info, &vinfo, sizeof(struct vertex_info));
+ if (memcmp(&r300->vertex_info, &vformat,
+ sizeof(struct r300_vertex_format))) {
+ memcpy(&r300->vertex_info, &vformat,
+ sizeof(struct r300_vertex_format));
r300->dirty_state |= R300_NEW_VERTEX_FORMAT;
}
}
@@ -185,7 +216,7 @@ static void r300_update_rs_block(struct r300_context* r300)
{
struct r300_rs_block* rs = r300->rs_block;
struct vertex_info* vinfo = &r300->vertex_info.vinfo;
- int* tab = r300->vertex_info.tab;
+ int* tab = r300->vertex_info.vs_tab;
int col_count = 0, fp_offset = 0, i, memory_pos, tex_count = 0;
memset(rs, 0, sizeof(struct r300_rs_block));
@@ -307,7 +338,7 @@ void r300_update_derived_state(struct r300_context* r300)
{
if (r300->dirty_state &
(R300_NEW_FRAGMENT_SHADER | R300_NEW_VERTEX_SHADER)) {
- r300_update_vertex_layout(r300);
+ r300_update_vertex_format(r300);
}
if (r300->dirty_state & R300_NEW_VERTEX_FORMAT) {