diff options
Diffstat (limited to 'src/gallium')
-rw-r--r-- | src/gallium/drivers/r300/r300_cs.h | 9 | ||||
-rw-r--r-- | src/gallium/drivers/r300/r300_emit.c | 7 | ||||
-rw-r--r-- | src/gallium/drivers/r300/r300_surface.c | 73 | ||||
-rw-r--r-- | src/gallium/drivers/r300/r300_surface.h | 2 |
4 files changed, 50 insertions, 41 deletions
diff --git a/src/gallium/drivers/r300/r300_cs.h b/src/gallium/drivers/r300/r300_cs.h index d15887fb1c1..734ccb13d9d 100644 --- a/src/gallium/drivers/r300/r300_cs.h +++ b/src/gallium/drivers/r300/r300_cs.h @@ -85,7 +85,9 @@ static uint32_t pack_float_32(float f) } while (0) #define OUT_CS_REG(register, value) do { \ - debug_printf("r300: writing 0x%08X to register 0x%04X\n", value, register); \ + debug_printf("r300: writing 0x%08X to register 0x%04X\n", \ + value, register); \ + assert(register); \ OUT_CS(CP_PACKET0(register, 0)); \ OUT_CS(value); \ } while (0) @@ -93,13 +95,16 @@ static uint32_t pack_float_32(float f) /* Note: This expects count to be the number of registers, * not the actual packet0 count! */ #define OUT_CS_REG_SEQ(register, count) do { \ - debug_printf("r300: writing register sequence of %d to 0x%04X\n", count, register); \ + debug_printf("r300: writing register sequence of %d to 0x%04X\n", \ + count, register); \ + assert(register); \ OUT_CS(CP_PACKET0(register, ((count) - 1))); \ } while (0) #define OUT_CS_RELOC(bo, offset, rd, wd, flags) do { \ debug_printf("r300: writing relocation for buffer %p, offset %d\n", \ bo, offset); \ + assert(bo); \ OUT_CS(offset); \ cs_winsys->write_cs_reloc(cs, bo, rd, wd, flags); \ } while (0) diff --git a/src/gallium/drivers/r300/r300_emit.c b/src/gallium/drivers/r300/r300_emit.c index 4ae8a46637a..c5f08a2404e 100644 --- a/src/gallium/drivers/r300/r300_emit.c +++ b/src/gallium/drivers/r300/r300_emit.c @@ -62,9 +62,12 @@ void r300_emit_dsa_state(struct r300_context* r300, struct r300_screen* r300screen = (struct r300_screen*)r300->context.screen; CS_LOCALS(r300); - BEGIN_CS(r300screen->caps->is_r500 ? 12 : 10); + BEGIN_CS(r300screen->caps->is_r500 ? 12 : 8); OUT_CS_REG(R300_FG_ALPHA_FUNC, dsa->alpha_function); - OUT_CS_REG(R500_FG_ALPHA_VALUE, dsa->alpha_reference); + /* XXX figure out the r300 counterpart for this */ + if (r300screen->caps->is_r500) { + OUT_CS_REG(R500_FG_ALPHA_VALUE, dsa->alpha_reference); + } OUT_CS_REG_SEQ(R300_ZB_CNTL, 3); OUT_CS(dsa->z_buffer_control); OUT_CS(dsa->z_stencil_control); diff --git a/src/gallium/drivers/r300/r300_surface.c b/src/gallium/drivers/r300/r300_surface.c index f2d0183c981..185b56ff88d 100644 --- a/src/gallium/drivers/r300/r300_surface.c +++ b/src/gallium/drivers/r300/r300_surface.c @@ -42,17 +42,10 @@ static void r300_surface_fill(struct pipe_context* pipe, " dimensions %dx%d, color 0x%x\n", dest, x, y, w, h, color); -BEGIN_CS((caps->is_r500) ? 367 : 276); +BEGIN_CS((caps->is_r500) ? 367 : 322); R300_PACIFY; OUT_CS_REG(R300_TX_INVALTAGS, 0x0); R300_PACIFY; -/* Viewport setup */ -OUT_CS_REG(R300_SE_VPORT_XSCALE, 0x43000000); -OUT_CS_REG(R300_SE_VPORT_XOFFSET, 0x43002000); -OUT_CS_REG(R300_SE_VPORT_YSCALE, 0xC3000000); -OUT_CS_REG(R300_SE_VPORT_YOFFSET, 0x43002000); -OUT_CS_REG(R300_SE_VPORT_ZSCALE, 0x3F000000); -OUT_CS_REG(R300_SE_VPORT_ZOFFSET, 0x3F000000); /* Flush PVS. */ OUT_CS_REG(R300_VAP_PVS_STATE_FLUSH_REG, 0x0); @@ -71,7 +64,7 @@ OUT_CS_REG(R300_VAP_PROG_STREAM_CNTL_0, 0x0); /* XXX magic number not in r300_reg */ OUT_CS_REG(R300_VAP_PSC_SGN_NORM_CNTL, 0xAAAAAAAA); OUT_CS_REG(R300_VAP_CLIP_CNTL, 0x0); -OUT_CS_REG(R300_VAP_GB_VERT_CLIP_ADJ, 4); +OUT_CS_REG_SEQ(R300_VAP_GB_VERT_CLIP_ADJ, 4); OUT_CS_32F(1.0); OUT_CS_32F(1.0); OUT_CS_32F(1.0); @@ -149,9 +142,6 @@ OUT_CS_REG(R300_FG_DEPTH_SRC, 0x00000000); OUT_CS_REG(R300_RB3D_CCTL, 0x00000000); OUT_CS_REG(RB3D_COLOR_CHANNEL_MASK, 0x0000000F); -r300_emit_blend_color_state(r300, &blend_color_clear_state); - -OUT_CS_REG(R300_RB3D_BLEND_COLOR, 0x00000000); /* XXX: Oh the wonderful unknown */ OUT_CS_REG_SEQ(0x4E54, 8); for (i = 0; i < 8; i++) @@ -184,16 +174,16 @@ OUT_CS_REG(R300_VAP_PSC_SGN_NORM_CNTL, 0xAAAAAAAA); OUT_CS_REG(R300_VAP_OUTPUT_VTX_FMT_0, 0x00000003); OUT_CS_REG(R300_VAP_OUTPUT_VTX_FMT_1, 0x00000000); OUT_CS_REG(R300_TX_ENABLE, 0x0); -OUT_CS_REG(R300_SE_VPORT_XSCALE, 0x3F800000); -OUT_CS_REG(R300_SE_VPORT_XOFFSET, 0x00000000); -OUT_CS_REG(R300_SE_VPORT_YSCALE, 0x3F800000); -OUT_CS_REG(R300_SE_VPORT_YOFFSET, 0x00000000); -OUT_CS_REG(R300_SE_VPORT_ZSCALE, 0x3F800000); -OUT_CS_REG(R300_SE_VPORT_ZOFFSET, 0x00000000); +/* XXX viewport setup */ +OUT_CS_REG_SEQ(R300_SE_VPORT_XSCALE, 6); +OUT_CS_32F(1.0); +OUT_CS_32F(0.0); +OUT_CS_32F(1.0); +OUT_CS_32F(0.0); +OUT_CS_32F(1.0); +OUT_CS_32F(0.0); OUT_CS_REG(R300_FG_ALPHA_FUNC, 0x00000000); -r300_emit_blend_state(r300, &blend_clear_state); - OUT_CS_REG(R300_VAP_CLIP_CNTL, 0x0001C000); OUT_CS_REG(R300_GA_POINT_SIZE, ((h * 6) & R300_POINTSIZE_Y_MASK) | ((w * 6) << R300_POINTSIZE_X_SHIFT)); @@ -262,22 +252,22 @@ if (caps->is_r500) { for (i = 0; i < 8; i++) { OUT_CS(R300_RS_SEL_T(1) | R300_RS_SEL_R(2) | R300_RS_SEL_Q(3)); } -} -OUT_CS_REG(R300_RS_COUNT, (1 << R300_IC_COUNT_SHIFT) | R300_HIRES_EN); -OUT_CS_REG(R300_RS_INST_COUNT, 0x0); + OUT_CS_REG(R300_RS_COUNT, (1 << R300_IC_COUNT_SHIFT) | R300_HIRES_EN); + OUT_CS_REG(R300_RS_INST_COUNT, 0x0); -OUT_CS_REG(R300_RS_INST_0, 0x00004000); -OUT_CS_REG(R300_US_CONFIG, 0x00000000); -OUT_CS_REG(R300_US_PIXSIZE, 0x00000000); -OUT_CS_REG(R300_US_CODE_OFFSET, 0x00000000); -OUT_CS_REG(R300_US_CODE_ADDR_0, 0x00000000); -OUT_CS_REG(R300_US_CODE_ADDR_1, 0x00000000); -OUT_CS_REG(R300_US_CODE_ADDR_2, 0x00000000); -OUT_CS_REG(R300_US_CODE_ADDR_3, 0x00400000); -OUT_CS_REG(R300_US_ALU_RGB_INST_0, 0x00050A80); -OUT_CS_REG(R300_US_ALU_RGB_ADDR_0, 0x1C000000); -OUT_CS_REG(R300_US_ALU_ALPHA_INST_0, 0x00040889); -OUT_CS_REG(R300_US_ALU_ALPHA_ADDR_0, 0x01000000); + OUT_CS_REG(R300_RS_INST_0, 0x00004000); + OUT_CS_REG(R300_US_CONFIG, 0x00000000); + OUT_CS_REG(R300_US_PIXSIZE, 0x00000000); + OUT_CS_REG(R300_US_CODE_OFFSET, 0x00000000); + OUT_CS_REG(R300_US_CODE_ADDR_0, 0x00000000); + OUT_CS_REG(R300_US_CODE_ADDR_1, 0x00000000); + OUT_CS_REG(R300_US_CODE_ADDR_2, 0x00000000); + OUT_CS_REG(R300_US_CODE_ADDR_3, 0x00400000); + OUT_CS_REG(R300_US_ALU_RGB_INST_0, 0x00050A80); + OUT_CS_REG(R300_US_ALU_RGB_ADDR_0, 0x1C000000); + OUT_CS_REG(R300_US_ALU_ALPHA_INST_0, 0x00040889); + OUT_CS_REG(R300_US_ALU_ALPHA_ADDR_0, 0x01000000); +} /* XXX these magic numbers should be explained when * this becomes a cached state object */ OUT_CS_REG(R300_VAP_CNTL, 0xA | (0x5 << R300_PVS_NUM_CNTLRS_SHIFT) | @@ -300,12 +290,23 @@ OUT_CS_REG(R300_VAP_PVS_UPLOAD_DATA, 0xD10021); OUT_CS_REG(R300_VAP_PVS_UPLOAD_DATA, 0x1248021); OUT_CS_REG(R300_VAP_PVS_UPLOAD_DATA, 0x0); +r300_emit_blend_state(r300, &blend_clear_state); +r300_emit_blend_color_state(r300, &blend_color_clear_state); r300_emit_dsa_state(r300, &dsa_clear_state); R300_PACIFY; +/* Flush colorbuffer and blend caches. */ +OUT_CS_REG(R300_RB3D_DSTCACHE_CTLSTAT, + R300_RB3D_DSTCACHE_CTLSTAT_DC_FLUSH_FLUSH_DIRTY_3D | + R300_RB3D_DSTCACHE_CTLSTAT_DC_FINISH_SIGNAL); +OUT_CS_REG(R300_ZB_ZCACHE_CTLSTAT, + R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE | + R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE); + OUT_CS_REG_SEQ(R300_RB3D_COLOROFFSET0, 1); OUT_CS_RELOC(dest->buffer, 0, 0, RADEON_GEM_DOMAIN_VRAM, 0); -//OUT_CS_REG(R300_RB3D_COLORPITCH0, 0x00C00100); +OUT_CS_REG(R300_RB3D_COLORPITCH0, (w >> 1) | R300_COLOR_TILE_ENABLE | + R300_COLOR_FORMAT_ARGB8888); OUT_CS_REG(RB3D_COLOR_CHANNEL_MASK, 0x0000000F); /* XXX Packet3 */ OUT_CS(CP_PACKET3(R200_3D_DRAW_IMMD_2, 8)); diff --git a/src/gallium/drivers/r300/r300_surface.h b/src/gallium/drivers/r300/r300_surface.h index 2b89698ca5d..e1d53116a1f 100644 --- a/src/gallium/drivers/r300/r300_surface.h +++ b/src/gallium/drivers/r300/r300_surface.h @@ -50,7 +50,7 @@ const struct r300_dsa_state dsa_clear_state = { .alpha_reference = 0x0, .z_buffer_control = 0x0, .z_stencil_control = 0x0, - .stencil_ref_mask = 0x0, + .stencil_ref_mask = R300_STENCILWRITEMASK_MASK, .z_buffer_top = R300_ZTOP_ENABLE, .stencil_ref_bf = 0x0, }; |