diff options
Diffstat (limited to 'src/gallium/drivers/r300/r300_reg.h')
| -rw-r--r-- | src/gallium/drivers/r300/r300_reg.h | 248 |
1 files changed, 130 insertions, 118 deletions
diff --git a/src/gallium/drivers/r300/r300_reg.h b/src/gallium/drivers/r300/r300_reg.h index dbd0cc28e23..6f3ad970abc 100644 --- a/src/gallium/drivers/r300/r300_reg.h +++ b/src/gallium/drivers/r300/r300_reg.h @@ -64,7 +64,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R300_SE_VPORT_ZSCALE 0x1DA8 #define R300_SE_VPORT_ZOFFSET 0x1DAC - +#define R300_VAP_PORT_IDX0 0x2040 /* * Vertex Array Processing (VAP) Control */ @@ -139,17 +139,25 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_VAP_OUTPUT_VTX_FMT_1__3_COMPONENTS 3 # define R300_VAP_OUTPUT_VTX_FMT_1__4_COMPONENTS 4 -#define R300_SE_VTE_CNTL 0x20b0 -# define R300_VPORT_X_SCALE_ENA (1 << 0) -# define R300_VPORT_X_OFFSET_ENA (1 << 1) -# define R300_VPORT_Y_SCALE_ENA (1 << 2) -# define R300_VPORT_Y_OFFSET_ENA (1 << 3) -# define R300_VPORT_Z_SCALE_ENA (1 << 4) -# define R300_VPORT_Z_OFFSET_ENA (1 << 5) -# define R300_VTX_XY_FMT (1 << 8) -# define R300_VTX_Z_FMT (1 << 9) -# define R300_VTX_W0_FMT (1 << 10) -# define R300_SERIAL_PROC_ENA (1 << 11) +#define R300_VAP_VPORT_XSCALE 0x2098 +#define R300_VAP_VPORT_XOFFSET 0x209c +#define R300_VAP_VPORT_YSCALE 0x20a0 +#define R300_VAP_VPORT_YOFFSET 0x20a4 +#define R300_VAP_VPORT_ZSCALE 0x20a8 +#define R300_VAP_VPORT_ZOFFSET 0x20ac + +#define R300_VAP_VTE_CNTL 0x20b0 +#define R300_SE_VTE_CNTL R300_VAP_VTE_CNTL +# define R300_VPORT_X_SCALE_ENA (1 << 0) +# define R300_VPORT_X_OFFSET_ENA (1 << 1) +# define R300_VPORT_Y_SCALE_ENA (1 << 2) +# define R300_VPORT_Y_OFFSET_ENA (1 << 3) +# define R300_VPORT_Z_SCALE_ENA (1 << 4) +# define R300_VPORT_Z_OFFSET_ENA (1 << 5) +# define R300_VTX_XY_FMT (1 << 8) +# define R300_VTX_Z_FMT (1 << 9) +# define R300_VTX_W0_FMT (1 << 10) +# define R300_SERIAL_PROC_ENA (1 << 11) #define R300_VAP_VTX_SIZE 0x20b4 @@ -326,6 +334,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_WRITE_ENA_Z 4 # define R300_WRITE_ENA_W 8 # define R300_SWIZZLE1_SHIFT 16 + +# define R300_VAP_SWIZZLE_XYZW \ + ((R300_SWIZZLE_SELECT_X << R300_SWIZZLE_SELECT_X_SHIFT) | \ + (R300_SWIZZLE_SELECT_Y << R300_SWIZZLE_SELECT_Y_SHIFT) | \ + (R300_SWIZZLE_SELECT_Z << R300_SWIZZLE_SELECT_Z_SHIFT) | \ + (R300_SWIZZLE_SELECT_W << R300_SWIZZLE_SELECT_W_SHIFT) | \ + (0xf << R300_WRITE_ENA_SHIFT)) + #define R300_VAP_PROG_STREAM_CNTL_EXT_1 0x21e4 #define R300_VAP_PROG_STREAM_CNTL_EXT_2 0x21e8 #define R300_VAP_PROG_STREAM_CNTL_EXT_3 0x21ec @@ -732,8 +748,12 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R500_RS_IP_TEX_PTR_Q_SHIFT 18 #define R500_RS_IP_COL_PTR_SHIFT 24 #define R500_RS_IP_COL_FMT_SHIFT 27 -# define R500_RS_COL_PTR(x) (x << 24) -# define R500_RS_COL_FMT(x) (x << 27) +# define R500_RS_SEL_S(x) ((x) << 0) +# define R500_RS_SEL_T(x) ((x) << 6) +# define R500_RS_SEL_R(x) ((x) << 12) +# define R500_RS_SEL_Q(x) ((x) << 18) +# define R500_RS_COL_PTR(x) ((x) << 24) +# define R500_RS_COL_FMT(x) ((x) << 27) /* gap */ #define R500_RS_IP_OFFSET_DIS (0 << 31) #define R500_RS_IP_OFFSET_EN (1 << 31) @@ -1019,20 +1039,27 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_THIRD (2 << 16) # define R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_LAST (3 << 16) -/** TODO: might be candidate for removal */ -# define R300_RE_SHADE_MODEL_SMOOTH ( \ - R300_GA_COLOR_CONTROL_RGB0_SHADING_GOURAUD | R300_GA_COLOR_CONTROL_ALPHA0_SHADING_GOURAUD | \ - R300_GA_COLOR_CONTROL_RGB1_SHADING_GOURAUD | R300_GA_COLOR_CONTROL_ALPHA1_SHADING_GOURAUD | \ - R300_GA_COLOR_CONTROL_RGB2_SHADING_GOURAUD | R300_GA_COLOR_CONTROL_ALPHA2_SHADING_GOURAUD | \ - R300_GA_COLOR_CONTROL_RGB3_SHADING_GOURAUD | R300_GA_COLOR_CONTROL_ALPHA3_SHADING_GOURAUD | \ - R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_LAST ) -/** TODO: might be candidate for removal, the GOURAUD stuff also looks buggy to me */ -# define R300_RE_SHADE_MODEL_FLAT ( \ - R300_GA_COLOR_CONTROL_RGB0_SHADING_FLAT | R300_GA_COLOR_CONTROL_ALPHA0_SHADING_FLAT | \ - R300_GA_COLOR_CONTROL_RGB1_SHADING_FLAT | R300_GA_COLOR_CONTROL_ALPHA1_SHADING_GOURAUD | \ - R300_GA_COLOR_CONTROL_RGB2_SHADING_FLAT | R300_GA_COLOR_CONTROL_ALPHA2_SHADING_FLAT | \ - R300_GA_COLOR_CONTROL_RGB3_SHADING_FLAT | R300_GA_COLOR_CONTROL_ALPHA3_SHADING_GOURAUD | \ - R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_LAST ) +# define R300_SHADE_MODEL_FLAT ( \ + R300_GA_COLOR_CONTROL_RGB0_SHADING_FLAT | \ + R300_GA_COLOR_CONTROL_ALPHA0_SHADING_FLAT | \ + R300_GA_COLOR_CONTROL_RGB1_SHADING_FLAT | \ + R300_GA_COLOR_CONTROL_ALPHA1_SHADING_FLAT | \ + R300_GA_COLOR_CONTROL_RGB2_SHADING_FLAT | \ + R300_GA_COLOR_CONTROL_ALPHA2_SHADING_FLAT | \ + R300_GA_COLOR_CONTROL_RGB3_SHADING_FLAT | \ + R300_GA_COLOR_CONTROL_ALPHA3_SHADING_FLAT | \ + R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_LAST ) + +# define R300_SHADE_MODEL_SMOOTH ( \ + R300_GA_COLOR_CONTROL_RGB0_SHADING_GOURAUD | \ + R300_GA_COLOR_CONTROL_ALPHA0_SHADING_GOURAUD | \ + R300_GA_COLOR_CONTROL_RGB1_SHADING_GOURAUD | \ + R300_GA_COLOR_CONTROL_ALPHA1_SHADING_GOURAUD | \ + R300_GA_COLOR_CONTROL_RGB2_SHADING_GOURAUD | \ + R300_GA_COLOR_CONTROL_ALPHA2_SHADING_GOURAUD | \ + R300_GA_COLOR_CONTROL_RGB3_SHADING_GOURAUD | \ + R300_GA_COLOR_CONTROL_ALPHA3_SHADING_GOURAUD | \ + R300_GA_COLOR_CONTROL_PROVOKING_VERTEX_LAST ) /* Specifies red & green components of fill color -- S312 format -- Backwards comp. */ #define R300_GA_SOLID_RG 0x427c @@ -1146,6 +1173,9 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_W_ADDR_MASK 0x0003f000 # define R300_HIRES_DIS (0 << 18) # define R300_HIRES_EN (1 << 18) +# define R300_IT_COUNT(x) ((x) << 0) +# define R300_IC_COUNT(x) ((x) << 7) +# define R300_W_COUNT(x) ((x) << 12) #define R300_RS_INST_COUNT 0x4304 # define R300_RS_INST_COUNT_SHIFT 0 @@ -1175,8 +1205,8 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_RS_INTERP_SRC_SHIFT 2 /* TODO: check for removal */ # define R300_RS_INTERP_SRC_MASK (7 << 2) /* TODO: check for removal */ # define R300_RS_TEX_PTR(x) (x << 0) -# define R300_RS_COL_PTR(x) (x << 6) -# define R300_RS_COL_FMT(x) (x << 9) +# define R300_RS_COL_PTR(x) ((x) << 6) +# define R300_RS_COL_FMT(x) ((x) << 9) # define R300_RS_COL_FMT_RGBA 0 # define R300_RS_COL_FMT_RGB0 1 # define R300_RS_COL_FMT_RGB1 2 @@ -1186,10 +1216,10 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_RS_COL_FMT_111A 8 # define R300_RS_COL_FMT_1110 9 # define R300_RS_COL_FMT_1111 10 -# define R300_RS_SEL_S(x) (x << 13) -# define R300_RS_SEL_T(x) (x << 16) -# define R300_RS_SEL_R(x) (x << 19) -# define R300_RS_SEL_Q(x) (x << 22) +# define R300_RS_SEL_S(x) ((x) << 13) +# define R300_RS_SEL_T(x) ((x) << 16) +# define R300_RS_SEL_R(x) ((x) << 19) +# define R300_RS_SEL_Q(x) ((x) << 22) # define R300_RS_SEL_C0 0 # define R300_RS_SEL_C1 1 # define R300_RS_SEL_C2 2 @@ -1216,14 +1246,18 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R500_RS_INST_14 0x4358 #define R500_RS_INST_15 0x435c #define R500_RS_INST_TEX_ID_SHIFT 0 +# define R500_RS_INST_TEX_ID(x) ((x) << 0) #define R500_RS_INST_TEX_CN_WRITE (1 << 4) #define R500_RS_INST_TEX_ADDR_SHIFT 5 +# define R500_RS_INST_TEX_ADDR(x) ((x) << 0) #define R500_RS_INST_COL_ID_SHIFT 12 +# define R500_RS_INST_COL_ID(x) ((x) << 12) #define R500_RS_INST_COL_CN_NO_WRITE (0 << 16) #define R500_RS_INST_COL_CN_WRITE (1 << 16) #define R500_RS_INST_COL_CN_WRITE_FBUFFER (2 << 16) #define R500_RS_INST_COL_CN_WRITE_BACKFACE (3 << 16) #define R500_RS_INST_COL_ADDR_SHIFT 18 +# define R500_RS_INST_COL_ADDR(x) ((x) << 18) #define R500_RS_INST_TEX_ADJ (1 << 25) #define R500_RS_INST_W_CN (1 << 26) @@ -1240,9 +1274,11 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. #define R300_RS_INST_7 0x434C # define R300_RS_INST_TEX_ID(x) ((x) << 0) # define R300_RS_INST_TEX_CN_WRITE (1 << 3) +# define R300_RS_INST_TEX_ADDR(x) ((x) << 6) # define R300_RS_INST_TEX_ADDR_SHIFT 6 # define R300_RS_INST_COL_ID(x) ((x) << 11) # define R300_RS_INST_COL_CN_WRITE (1 << 14) +# define R300_RS_INST_COL_ADDR(x) ((x) << 17) # define R300_RS_INST_COL_ADDR_SHIFT 17 # define R300_RS_INST_TEX_ADJ (1 << 22) # define R300_RS_COL_BIAS_UNUSED_SHIFT 23 @@ -1411,18 +1447,21 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R500_MACRO_SWITCH (1<<22) # define R500_BORDER_FIX (1<<31) -#define R300_TX_SIZE_0 0x4480 +#define R300_TX_FORMAT0_0 0x4480 # define R300_TX_WIDTHMASK_SHIFT 0 # define R300_TX_WIDTHMASK_MASK (2047 << 0) # define R300_TX_HEIGHTMASK_SHIFT 11 # define R300_TX_HEIGHTMASK_MASK (2047 << 11) -# define R300_TX_DEPTHMASK_SHIFT 22 -# define R300_TX_DEPTHMASK_MASK (0xf << 22) +# define R300_TX_DEPTHMASK_SHIFT 22 +# define R300_TX_DEPTHMASK_MASK (0xf << 22) # define R300_TX_MAX_MIP_LEVEL_SHIFT 26 # define R300_TX_MAX_MIP_LEVEL_MASK (0xf << 26) -# define R300_TX_SIZE_PROJECTED (1<<30) -# define R300_TX_SIZE_TXPITCH_EN (1<<31) -#define R300_TX_FORMAT_0 0x44C0 +# define R300_TX_SIZE_PROJECTED (1 << 30) +# define R300_TX_PITCH_EN (1 << 31) +# define R300_TX_WIDTH(x) ((x) << 0) +# define R300_TX_HEIGHT(x) ((x) << 11) + +#define R300_TX_FORMAT1_0 0x44C0 /* The interpretation of the format word by Wladimir van der Laan */ /* The X, Y, Z and W refer to the layout of the components. They are given meanings as R, G, B and Alpha by the swizzle @@ -1708,7 +1747,8 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_C3_SEL_R (1 << 14) # define R300_C3_SEL_G (2 << 14) # define R300_C3_SEL_B (3 << 14) -# define R300_OUT_SIGN(x) (x << 16) +# define R300_OUT_SIGN(x) ((x) << 16) +# define R500_ROUND_ADJ (1 << 20) /* ALU * The ALU instructions register blocks are enumerated according to the order @@ -1795,6 +1835,10 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ALU_DSTC_OUTPUT_X (1 << 26) # define R300_ALU_DSTC_OUTPUT_Y (1 << 27) # define R300_ALU_DSTC_OUTPUT_Z (1 << 28) +# define R300_ALU_DSTC_OUTPUT_XYZ (7 << 26) +# define R300_RGB_ADDR0(x) ((x) << 0) +# define R300_RGB_ADDR1(x) ((x) << 6) +# define R300_RGB_ADDR2(x) ((x) << 12) #define R300_US_ALU_ALPHA_ADDR_0 0x47C0 # define R300_ALU_SRC0A_SHIFT 0 @@ -1812,6 +1856,9 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ALU_DSTA_REG (1 << 23) # define R300_ALU_DSTA_OUTPUT (1 << 24) # define R300_ALU_DSTA_DEPTH (1 << 27) +# define R300_ALPHA_ADDR0(x) ((x) << 0) +# define R300_ALPHA_ADDR1(x) ((x) << 6) +# define R300_ALPHA_ADDR2(x) ((x) << 12) #define R300_US_ALU_RGB_INST_0 0x48C0 # define R300_ALU_ARGC_SRC0C_XYZ 0 @@ -1846,6 +1893,9 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ALU_ARGC_SRC0CA_WZY 29 # define R300_ALU_ARGC_SRC1CA_WZY 30 # define R300_ALU_ARGC_SRC2CA_WZY 31 +# define R300_RGB_SWIZA(x) ((x) << 0) +# define R300_RGB_SWIZB(x) ((x) << 7) +# define R300_RGB_SWIZC(x) ((x) << 14) # define R300_ALU_ARG0C_SHIFT 0 # define R300_ALU_ARG0C_MASK (31 << 0) @@ -1909,10 +1959,13 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ALU_ARGA_SRCP_Y 13 # define R300_ALU_ARGA_SRCP_Z 14 # define R300_ALU_ARGA_SRCP_W 15 - # define R300_ALU_ARGA_ZERO 16 # define R300_ALU_ARGA_ONE 17 # define R300_ALU_ARGA_HALF 18 +# define R300_ALPHA_SWIZA(x) ((x) << 0) +# define R300_ALPHA_SWIZB(x) ((x) << 7) +# define R300_ALPHA_SWIZC(x) ((x) << 14) + # define R300_ALU_ARG0A_SHIFT 0 # define R300_ALU_ARG0A_MASK (31 << 0) # define R300_ALU_ARG0A_NOP (0 << 5) @@ -2731,7 +2784,7 @@ enum { # define R500_ALPHA_OP_COS 13 # define R500_ALPHA_OP_MDH 14 # define R500_ALPHA_OP_MDV 15 -# define R500_ALPHA_ADDRD(x) (x << 4) +# define R500_ALPHA_ADDRD(x) ((x) << 4) # define R500_ALPHA_ADDRD_REL (1 << 11) # define R500_ALPHA_SEL_A_SHIFT 12 # define R500_ALPHA_SEL_A_SRC0 (0 << 12) @@ -2775,16 +2828,16 @@ enum { # define R500_ALPHA_OMOD_DIV_4 (5 << 26) # define R500_ALPHA_OMOD_DIV_8 (6 << 26) # define R500_ALPHA_OMOD_DISABLE (7 << 26) -# define R500_ALPHA_TARGET(x) (x << 29) +# define R500_ALPHA_TARGET(x) ((x) << 29) # define R500_ALPHA_W_OMASK (1 << 31) #define R500_US_ALU_ALPHA_ADDR_0 0x9800 -# define R500_ALPHA_ADDR0(x) (x << 0) +# define R500_ALPHA_ADDR0(x) ((x) << 0) # define R500_ALPHA_ADDR0_CONST (1 << 8) # define R500_ALPHA_ADDR0_REL (1 << 9) -# define R500_ALPHA_ADDR1(x) (x << 10) +# define R500_ALPHA_ADDR1(x) ((x) << 10) # define R500_ALPHA_ADDR1_CONST (1 << 18) # define R500_ALPHA_ADDR1_REL (1 << 19) -# define R500_ALPHA_ADDR2(x) (x << 20) +# define R500_ALPHA_ADDR2(x) ((x) << 20) # define R500_ALPHA_ADDR2_CONST (1 << 28) # define R500_ALPHA_ADDR2_REL (1 << 29) # define R500_ALPHA_SRCP_OP_1_MINUS_2A0 (0 << 30) @@ -2805,7 +2858,7 @@ enum { # define R500_ALU_RGBA_OP_SOP (10 << 0) # define R500_ALU_RGBA_OP_MDH (11 << 0) # define R500_ALU_RGBA_OP_MDV (12 << 0) -# define R500_ALU_RGBA_ADDRD(x) (x << 4) +# define R500_ALU_RGBA_ADDRD(x) ((x) << 4) # define R500_ALU_RGBA_ADDRD_REL (1 << 11) # define R500_ALU_RGBA_SEL_C_SHIFT 12 # define R500_ALU_RGBA_SEL_C_SRC0 (0 << 12) @@ -2932,16 +2985,16 @@ enum { # define R500_ALU_RGB_OMOD_DIV_4 (5 << 26) # define R500_ALU_RGB_OMOD_DIV_8 (6 << 26) # define R500_ALU_RGB_OMOD_DISABLE (7 << 26) -# define R500_ALU_RGB_TARGET(x) (x << 29) +# define R500_ALU_RGB_TARGET(x) ((x) << 29) # define R500_ALU_RGB_WMASK (1 << 31) #define R500_US_ALU_RGB_ADDR_0 0x9000 -# define R500_RGB_ADDR0(x) (x << 0) +# define R500_RGB_ADDR0(x) ((x) << 0) # define R500_RGB_ADDR0_CONST (1 << 8) # define R500_RGB_ADDR0_REL (1 << 9) -# define R500_RGB_ADDR1(x) (x << 10) +# define R500_RGB_ADDR1(x) ((x) << 10) # define R500_RGB_ADDR1_CONST (1 << 18) # define R500_RGB_ADDR1_REL (1 << 19) -# define R500_RGB_ADDR2(x) (x << 20) +# define R500_RGB_ADDR2(x) ((x) << 20) # define R500_RGB_ADDR2_CONST (1 << 28) # define R500_RGB_ADDR2_REL (1 << 29) # define R500_RGB_SRCP_OP_1_MINUS_2RGB0 (0 << 30) @@ -2973,6 +3026,7 @@ enum { # define R500_INST_RGB_OMASK_R (1 << 15) # define R500_INST_RGB_OMASK_G (1 << 16) # define R500_INST_RGB_OMASK_B (1 << 17) +# define R500_INST_RGB_OMASK_RGB (7 << 15) # define R500_INST_ALPHA_OMASK (1 << 18) # define R500_INST_RGB_CLAMP (1 << 19) # define R500_INST_ALPHA_CLAMP (1 << 20) @@ -2996,19 +3050,19 @@ enum { /* note that these are 8 bit lengths, despite the offsets, at least for R500 */ #define R500_US_CODE_ADDR 0x4630 -# define R500_US_CODE_START_ADDR(x) (x << 0) -# define R500_US_CODE_END_ADDR(x) (x << 16) +# define R500_US_CODE_START_ADDR(x) ((x) << 0) +# define R500_US_CODE_END_ADDR(x) ((x) << 16) #define R500_US_CODE_OFFSET 0x4638 -# define R500_US_CODE_OFFSET_ADDR(x) (x << 0) +# define R500_US_CODE_OFFSET_ADDR(x) ((x) << 0) #define R500_US_CODE_RANGE 0x4634 -# define R500_US_CODE_RANGE_ADDR(x) (x << 0) -# define R500_US_CODE_RANGE_SIZE(x) (x << 16) +# define R500_US_CODE_RANGE_ADDR(x) ((x) << 0) +# define R500_US_CODE_RANGE_SIZE(x) ((x) << 16) #define R500_US_CONFIG 0x4600 # define R500_ZERO_TIMES_ANYTHING_EQUALS_ZERO (1 << 1) #define R500_US_FC_ADDR_0 0xa000 -# define R500_FC_BOOL_ADDR(x) (x << 0) -# define R500_FC_INT_ADDR(x) (x << 8) -# define R500_FC_JUMP_ADDR(x) (x << 16) +# define R500_FC_BOOL_ADDR(x) ((x) << 0) +# define R500_FC_INT_ADDR(x) ((x) << 8) +# define R500_FC_JUMP_ADDR(x) ((x) << 16) # define R500_FC_JUMP_GLOBAL (1 << 31) #define R500_US_FC_BOOL_CONST 0x4620 # define R500_FC_KBOOL(x) (x) @@ -3029,8 +3083,8 @@ enum { # define R500_FC_A_OP_NONE (0 << 6) # define R500_FC_A_OP_POP (1 << 6) # define R500_FC_A_OP_PUSH (2 << 6) -# define R500_FC_JUMP_FUNC(x) (x << 8) -# define R500_FC_B_POP_CNT(x) (x << 16) +# define R500_FC_JUMP_FUNC(x) ((x) << 8) +# define R500_FC_B_POP_CNT(x) ((x) << 16) # define R500_FC_B_OP0_NONE (0 << 24) # define R500_FC_B_OP0_DECR (1 << 24) # define R500_FC_B_OP0_INCR (2 << 24) @@ -3039,60 +3093,18 @@ enum { # define R500_FC_B_OP1_INCR (2 << 26) # define R500_FC_IGNORE_UNCOVERED (1 << 28) #define R500_US_FC_INT_CONST_0 0x4c00 -# define R500_FC_INT_CONST_KR(x) (x << 0) -# define R500_FC_INT_CONST_KG(x) (x << 8) -# define R500_FC_INT_CONST_KB(x) (x << 16) +# define R500_FC_INT_CONST_KR(x) ((x) << 0) +# define R500_FC_INT_CONST_KG(x) ((x) << 8) +# define R500_FC_INT_CONST_KB(x) ((x) << 16) /* _0 through _15 */ #define R500_US_FORMAT0_0 0x4640 -# define R500_FORMAT_TXWIDTH(x) (x << 0) -# define R500_FORMAT_TXHEIGHT(x) (x << 11) -# define R500_FORMAT_TXDEPTH(x) (x << 22) -/* _0 through _3 */ -#define R500_US_OUT_FMT_0 0x46A4 -# define R500_OUT_FMT_C4_8 (0 << 0) -# define R500_OUT_FMT_C4_10 (1 << 0) -# define R500_OUT_FMT_C4_10_GAMMA (2 << 0) -# define R500_OUT_FMT_C_16 (3 << 0) -# define R500_OUT_FMT_C2_16 (4 << 0) -# define R500_OUT_FMT_C4_16 (5 << 0) -# define R500_OUT_FMT_C_16_MPEG (6 << 0) -# define R500_OUT_FMT_C2_16_MPEG (7 << 0) -# define R500_OUT_FMT_C2_4 (8 << 0) -# define R500_OUT_FMT_C_3_3_2 (9 << 0) -# define R500_OUT_FMT_C_6_5_6 (10 << 0) -# define R500_OUT_FMT_C_11_11_10 (11 << 0) -# define R500_OUT_FMT_C_10_11_11 (12 << 0) -# define R500_OUT_FMT_C_2_10_10_10 (13 << 0) -/* #define R500_OUT_FMT_RESERVED (14 << 0) */ -# define R500_OUT_FMT_UNUSED (15 << 0) -# define R500_OUT_FMT_C_16_FP (16 << 0) -# define R500_OUT_FMT_C2_16_FP (17 << 0) -# define R500_OUT_FMT_C4_16_FP (18 << 0) -# define R500_OUT_FMT_C_32_FP (19 << 0) -# define R500_OUT_FMT_C2_32_FP (20 << 0) -# define R500_OUT_FMT_C4_32_FP (21 << 0) -# define R500_C0_SEL_A (0 << 8) -# define R500_C0_SEL_R (1 << 8) -# define R500_C0_SEL_G (2 << 8) -# define R500_C0_SEL_B (3 << 8) -# define R500_C1_SEL_A (0 << 10) -# define R500_C1_SEL_R (1 << 10) -# define R500_C1_SEL_G (2 << 10) -# define R500_C1_SEL_B (3 << 10) -# define R500_C2_SEL_A (0 << 12) -# define R500_C2_SEL_R (1 << 12) -# define R500_C2_SEL_G (2 << 12) -# define R500_C2_SEL_B (3 << 12) -# define R500_C3_SEL_A (0 << 14) -# define R500_C3_SEL_R (1 << 14) -# define R500_C3_SEL_G (2 << 14) -# define R500_C3_SEL_B (3 << 14) -# define R500_OUT_SIGN(x) (x << 16) -# define R500_ROUND_ADJ (1 << 20) +# define R500_FORMAT_TXWIDTH(x) ((x) << 0) +# define R500_FORMAT_TXHEIGHT(x) ((x) << 11) +# define R500_FORMAT_TXDEPTH(x) ((x) << 22) #define R500_US_PIXSIZE 0x4604 # define R500_PIX_SIZE(x) (x) #define R500_US_TEX_ADDR_0 0x9800 -# define R500_TEX_SRC_ADDR(x) (x << 0) +# define R500_TEX_SRC_ADDR(x) ((x) << 0) # define R500_TEX_SRC_ADDR_REL (1 << 7) # define R500_TEX_SRC_S_SWIZ_R (0 << 8) # define R500_TEX_SRC_S_SWIZ_G (1 << 8) @@ -3110,7 +3122,7 @@ enum { # define R500_TEX_SRC_Q_SWIZ_G (1 << 14) # define R500_TEX_SRC_Q_SWIZ_B (2 << 14) # define R500_TEX_SRC_Q_SWIZ_A (3 << 14) -# define R500_TEX_DST_ADDR(x) (x << 16) +# define R500_TEX_DST_ADDR(x) ((x) << 16) # define R500_TEX_DST_ADDR_REL (1 << 23) # define R500_TEX_DST_R_SWIZ_R (0 << 24) # define R500_TEX_DST_R_SWIZ_G (1 << 24) @@ -3129,7 +3141,7 @@ enum { # define R500_TEX_DST_A_SWIZ_B (2 << 30) # define R500_TEX_DST_A_SWIZ_A (3 << 30) #define R500_US_TEX_ADDR_DXDY_0 0xa000 -# define R500_DX_ADDR(x) (x << 0) +# define R500_DX_ADDR(x) ((x) << 0) # define R500_DX_ADDR_REL (1 << 7) # define R500_DX_S_SWIZ_R (0 << 8) # define R500_DX_S_SWIZ_G (1 << 8) @@ -3147,7 +3159,7 @@ enum { # define R500_DX_Q_SWIZ_G (1 << 14) # define R500_DX_Q_SWIZ_B (2 << 14) # define R500_DX_Q_SWIZ_A (3 << 14) -# define R500_DY_ADDR(x) (x << 16) +# define R500_DY_ADDR(x) ((x) << 16) # define R500_DY_ADDR_REL (1 << 17) # define R500_DY_S_SWIZ_R (0 << 24) # define R500_DY_S_SWIZ_G (1 << 24) @@ -3166,7 +3178,7 @@ enum { # define R500_DY_Q_SWIZ_B (2 << 30) # define R500_DY_Q_SWIZ_A (3 << 30) #define R500_US_TEX_INST_0 0x9000 -# define R500_TEX_ID(x) (x << 16) +# define R500_TEX_ID(x) ((x) << 16) # define R500_TEX_INST_NOP (0 << 22) # define R500_TEX_INST_LD (1 << 22) # define R500_TEX_INST_TEXKILL (2 << 22) @@ -3227,9 +3239,9 @@ enum { #define R300_PACKET3_3D_LOAD_VBPNTR 0x00002F00 #define R300_PACKET3_INDX_BUFFER 0x00003300 -# define R300_EB_UNK1_SHIFT 24 -# define R300_EB_UNK1 (0x80<<24) -# define R300_EB_UNK2 0x0810 +# define R300_INDX_BUFFER_DST_SHIFT 0 +# define R300_INDX_BUFFER_SKIP_SHIFT 16 +# define R300_INDX_BUFFER_ONE_REG_WR (1<<31) /* Same as R300_PACKET3_3D_DRAW_VBUF but without VAP_VTX_FMT */ #define R300_PACKET3_3D_DRAW_VBUF_2 0x00003400 |