diff options
Diffstat (limited to 'src/gallium/drivers/nvfx/nv30_vertprog.h')
| -rw-r--r-- | src/gallium/drivers/nvfx/nv30_vertprog.h | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/src/gallium/drivers/nvfx/nv30_vertprog.h b/src/gallium/drivers/nvfx/nv30_vertprog.h new file mode 100644 index 00000000000..ec0444c07f8 --- /dev/null +++ b/src/gallium/drivers/nvfx/nv30_vertprog.h @@ -0,0 +1,169 @@ +#ifndef __NV30_SHADER_H__ +#define __NV30_SHADER_H__ + +/* Vertex programs instruction set + * + * 128bit opcodes, split into 4 32-bit ones for ease of use. + * + * Non-native instructions + * ABS - MOV + NV40_VP_INST0_DEST_ABS + * POW - EX2 + MUL + LG2 + * SUB - ADD, second source negated + * SWZ - MOV + * XPD - + * + * Register access + * - Only one INPUT can be accessed per-instruction (move extras into TEMPs) + * - Only one CONST can be accessed per-instruction (move extras into TEMPs) + * + * Relative Addressing + * According to the value returned for + * MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB + * + * there are only two address registers available. The destination in the + * ARL instruction is set to TEMP <n> (The temp isn't actually written). + * + * When using vanilla ARB_v_p, the proprietary driver will squish both the + * available ADDRESS regs into the first hardware reg in the X and Y + * components. + * + * To use an address reg as an index into consts, the CONST_SRC is set to + * (const_base + offset) and INDEX_CONST is set. + * + * To access the second address reg use ADDR_REG_SELECT_1. A particular + * component of the address regs is selected with ADDR_SWZ. + * + * Only one address register can be accessed per instruction. + * + * Conditional execution (see NV_vertex_program{2,3} for details) Conditional + * execution of an instruction is enabled by setting COND_TEST_ENABLE, and + * selecting the condition which will allow the test to pass with + * COND_{FL,LT,...}. It is possible to swizzle the values in the condition + * register, which allows for testing against an individual component. + * + * Branching: + * + * The BRA/CAL instructions seem to follow a slightly different opcode + * layout. The destination instruction ID (IADDR) overlaps a source field. + * Instruction ID's seem to be numbered based on the UPLOAD_FROM_ID FIFO + * command, and is incremented automatically on each UPLOAD_INST FIFO + * command. + * + * Conditional branching is achieved by using the condition tests described + * above. There doesn't appear to be dedicated looping instructions, but + * this can be done using a temp reg + conditional branching. + * + * Subroutines may be uploaded before the main program itself, but the first + * executed instruction is determined by the PROGRAM_START_ID FIFO command. + * + */ + +/* DWORD 0 */ + +#define NV30_VP_INST_ADDR_REG_SELECT_1 (1 << 24) +#define NV30_VP_INST_SRC2_ABS (1 << 23) /* guess */ +#define NV30_VP_INST_SRC1_ABS (1 << 22) /* guess */ +#define NV30_VP_INST_SRC0_ABS (1 << 21) /* guess */ +#define NV30_VP_INST_VEC_RESULT (1 << 20) +#define NV30_VP_INST_DEST_TEMP_ID_SHIFT 16 +#define NV30_VP_INST_DEST_TEMP_ID_MASK (0x0F << 16) +#define NV30_VP_INST_COND_UPDATE_ENABLE (1<<15) +#define NV30_VP_INST_VEC_DEST_TEMP_MASK (0xF << 16) +#define NV30_VP_INST_COND_TEST_ENABLE (1<<14) +#define NV30_VP_INST_COND_SHIFT 11 +#define NV30_VP_INST_COND_MASK (0x07 << 11) +#define NV30_VP_INST_COND_SWZ_X_SHIFT 9 +#define NV30_VP_INST_COND_SWZ_X_MASK (0x03 << 9) +#define NV30_VP_INST_COND_SWZ_Y_SHIFT 7 +#define NV30_VP_INST_COND_SWZ_Y_MASK (0x03 << 7) +#define NV30_VP_INST_COND_SWZ_Z_SHIFT 5 +#define NV30_VP_INST_COND_SWZ_Z_MASK (0x03 << 5) +#define NV30_VP_INST_COND_SWZ_W_SHIFT 3 +#define NV30_VP_INST_COND_SWZ_W_MASK (0x03 << 3) +#define NV30_VP_INST_COND_SWZ_ALL_SHIFT 3 +#define NV30_VP_INST_COND_SWZ_ALL_MASK (0xFF << 3) +#define NV30_VP_INST_ADDR_SWZ_SHIFT 1 +#define NV30_VP_INST_ADDR_SWZ_MASK (0x03 << 1) +#define NV30_VP_INST_SCA_OPCODEH_SHIFT 0 +#define NV30_VP_INST_SCA_OPCODEH_MASK (0x01 << 0) + +/* DWORD 1 */ +#define NV30_VP_INST_SCA_OPCODEL_SHIFT 28 +#define NV30_VP_INST_SCA_OPCODEL_MASK (0x0F << 28) +#define NV30_VP_INST_VEC_OPCODE_SHIFT 23 +#define NV30_VP_INST_VEC_OPCODE_MASK (0x1F << 23) +#define NV30_VP_INST_CONST_SRC_SHIFT 14 +#define NV30_VP_INST_CONST_SRC_MASK (0xFF << 14) +#define NV30_VP_INST_INPUT_SRC_SHIFT 9 /*NV20*/ +#define NV30_VP_INST_INPUT_SRC_MASK (0x0F << 9) /*NV20*/ +#define NV30_VP_INST_SRC0H_SHIFT 0 /*NV20*/ +#define NV30_VP_INST_SRC0H_MASK (0x1FF << 0) /*NV20*/ + +/* Please note: the IADDR fields overlap other fields because they are used + * only for branch instructions. See Branching: label above + * + * DWORD 2 + */ +#define NV30_VP_INST_SRC0L_SHIFT 26 /*NV20*/ +#define NV30_VP_INST_SRC0L_MASK (0x3F <<26) /* NV30_VP_SRC0_LOW_MASK << 26 */ +#define NV30_VP_INST_SRC1_SHIFT 11 /*NV20*/ +#define NV30_VP_INST_SRC1_MASK (0x7FFF<<11) /*NV20*/ +#define NV30_VP_INST_SRC2H_SHIFT 0 /*NV20*/ +#define NV30_VP_INST_SRC2H_MASK (0x7FF << 0) /* NV30_VP_SRC2_HIGH_MASK >> 4*/ +#define NV30_VP_INST_IADDR_SHIFT 2 +#define NV30_VP_INST_IADDR_MASK (0xF << 28) /* NV30_VP_SRC2_LOW_MASK << 28 */ + +/* DWORD 3 */ +#define NV30_VP_INST_SRC2L_SHIFT 28 /*NV20*/ +#define NV30_VP_INST_SRC2L_MASK (0x0F <<28) /*NV20*/ +#define NV30_VP_INST_STEMP_WRITEMASK_SHIFT 24 +#define NV30_VP_INST_STEMP_WRITEMASK_MASK (0x0F << 24) +#define NV30_VP_INST_VTEMP_WRITEMASK_SHIFT 20 +#define NV30_VP_INST_VTEMP_WRITEMASK_MASK (0x0F << 20) +#define NV30_VP_INST_SDEST_WRITEMASK_SHIFT 16 +#define NV30_VP_INST_SDEST_WRITEMASK_MASK (0x0F << 16) +#define NV30_VP_INST_VDEST_WRITEMASK_SHIFT 12 /*NV20*/ +#define NV30_VP_INST_VDEST_WRITEMASK_MASK (0x0F << 12) /*NV20*/ +#define NV30_VP_INST_DEST_SHIFT 2 +#define NV30_VP_INST_DEST_MASK (0x0F << 2) +# define NV30_VP_INST_DEST_POS 0 +# define NV30_VP_INST_DEST_BFC0 1 +# define NV30_VP_INST_DEST_BFC1 2 +# define NV30_VP_INST_DEST_COL0 3 +# define NV30_VP_INST_DEST_COL1 4 +# define NV30_VP_INST_DEST_FOGC 5 +# define NV30_VP_INST_DEST_PSZ 6 +# define NV30_VP_INST_DEST_TC(n) (8+n) + +/* Useful to split the source selection regs into their pieces */ +#define NV30_VP_SRC0_HIGH_SHIFT 6 +#define NV30_VP_SRC0_HIGH_MASK 0x00007FC0 +#define NV30_VP_SRC0_LOW_MASK 0x0000003F +#define NV30_VP_SRC2_HIGH_SHIFT 4 +#define NV30_VP_SRC2_HIGH_MASK 0x00007FF0 +#define NV30_VP_SRC2_LOW_MASK 0x0000000F + + +/* Source-register definition - matches NV20 exactly */ +#define NV30_VP_SRC_NEGATE (1<<14) +#define NV30_VP_SRC_SWZ_X_SHIFT 12 +#define NV30_VP_SRC_REG_SWZ_X_MASK (0x03 <<12) +#define NV30_VP_SRC_SWZ_Y_SHIFT 10 +#define NV30_VP_SRC_REG_SWZ_Y_MASK (0x03 <<10) +#define NV30_VP_SRC_SWZ_Z_SHIFT 8 +#define NV30_VP_SRC_REG_SWZ_Z_MASK (0x03 << 8) +#define NV30_VP_SRC_SWZ_W_SHIFT 6 +#define NV30_VP_SRC_REG_SWZ_W_MASK (0x03 << 6) +#define NV30_VP_SRC_REG_SWZ_ALL_SHIFT 6 +#define NV30_VP_SRC_REG_SWZ_ALL_MASK (0xFF << 6) +#define NV30_VP_SRC_TEMP_SRC_SHIFT 2 +#define NV30_VP_SRC_REG_TEMP_ID_MASK (0x0F << 0) +#define NV30_VP_SRC_REG_TYPE_SHIFT 0 +#define NV30_VP_SRC_REG_TYPE_MASK (0x03 << 0) +#define NV30_VP_SRC_REG_TYPE_TEMP 1 +#define NV30_VP_SRC_REG_TYPE_INPUT 2 +#define NV30_VP_SRC_REG_TYPE_CONST 3 /* guess */ + +#include "nvfx_shader.h" + +#endif |